Commit Graph

17 Commits

Author SHA1 Message Date
Thomas Gleixner 646783a389 ia64: vsyscall: Add missing paranthesis
commit 74a622b (ia64: vsyscall: Use seqcount instead of seqlock) broke
the ia64 build.

Reported-by: Tony Luck  <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-03-27 15:06:15 +02:00
Thomas Gleixner 74a622be3d ia64: vsyscall: Use seqcount instead of seqlock
The update of the vdso data happens under xtime_lock, so adding a
nested lock is pointless. Just use a seqcount to sync the readers.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2012-03-15 18:17:59 -07:00
Isaku Yamahata 496203b15b ia64/pv_ops/xen: paravirtualize read/write ar.itc and ar.itm
paravirtualize ar.itc and ar.itm in order to support save/restore.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-03-26 10:50:32 -07:00
Isaku Yamahata 080104cd0f ia64/pv_ops/xen: elf note based xen startup.
This patch enables elf note based xen startup for IA-64, which gives the
kernel an early hint for running on xen like x86 case.
In order to avoid the multi entry point, presumably extending booting
protocol(i.e. extending struct ia64_boot_param) would be necessary.
It probably means that elilo also needs modification.

Signed-off-by: Qing He <qing.he@intel.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-10-17 10:02:21 -07:00
Isaku Yamahata b31c09bd82 ia64/xen: define several constants for ia64/xen.
define several constants for ia64/xen.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-10-17 09:55:36 -07:00
Tony Luck 7f30491ccd [IA64] Move include/asm-ia64 to arch/ia64/include/asm
After moving the the include files there were a few clean-ups:

1) Some files used #include <asm-ia64/xyz.h>, changed to <asm/xyz.h>

2) Some comments alerted maintainers to look at various header files to
make matching updates if certain code were to be changed. Updated these
comments to use the new include paths.

3) Some header files mentioned their own names in initial comments. Just
deleted these self references.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-08-01 10:21:21 -07:00
Christoph Lameter ad2bc7b480 ia64: use kbuild.h macros instead of defining macros in asm-offsets.c
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:29 -07:00
Tony Luck 71b264f85f Pull miscellaneous into release branch
Conflicts:

	arch/ia64/kernel/mca.c
2008-04-17 10:14:51 -07:00
Pavel Emelyanov 96ded9dadd [IA64] fix getpid and set_tid_address fast system calls for pid namespaces
The sys_getpid() and sys_set_tid_address() behavior changed from

	return current->tgid

to

	struct pid *pid;
	pid = current->pids[PIDTYPE_PID].pid;
	return pid->numbers[pid->level].nr;

But the fast system calls on ia64 still operate the old way.  Patch them
appropriately to let ia64 work with pid namespaces.  Besides, this is one more
step in deprecating of pid and tgid on task_struct.

The fsys_getppid() is to be patched as well, but its logic is much
more complex now, so I will make it later.

One thing I'm not 100% sure is the trick with the IA64_UPID_SHIFT.  On order
to access the pid->level's element of an array I have to perform the following
calculations

	pid + sizeof(struct upid) * pid->level

The problem is that ia64 can only multiply float point registers, while all
the offsets I have in code are in rXX ones.  Fortunately, the sizeof(struct
upid) is 32 bytes on ia64 (and is very unlikely to ever change), so the
calculations get simpler:

	pid + pid->level << 5

So, I introduce the IA64_UPID_SHIFT and use the shl instruction.  I also
looked at how gcc compiles the similar place and found that it makes it with
shift as well.  Is this OK to do so?

Tested with ski emulator with 2.6.24 kernel, but fits 2.6.25-rc4 and
2.6.25-rc4-mm1 as well.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: David Mosberger-Tang <davidm@hpl.hp.com>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-04-09 10:33:36 -07:00
Hidetoshi Seto b64f34cdfe [IA64] VIRT_CPU_ACCOUNTING (accurate cpu time accounting)
This patch implements VIRT_CPU_ACCOUNTING for ia64,
which enable us to use more accurate cpu time accounting.

The VIRT_CPU_ACCOUNTING is an item of kernel config, which s390
and powerpc arch have.  By turning this config on, these archs
change the mechanism of cpu time accounting from tick-sampling
based one to state-transition based one.

The state-transition based accounting is done by checking time
(cycle counter in processor) at every state-transition point,
such as entrance/exit of kernel, interrupt, softirq etc.
The difference between point to point is the actual time consumed
during in the state. There is no doubt about that this value is
more accurate than that of tick-sampling based accounting.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-02-20 12:55:37 -08:00
Tony Luck 0aa366f351 [IA64] Convert to generic timekeeping/clocksource
This is a merge of Peter Keilty's initial patch (which was
revived by Bob Picco) for this with Hidetoshi Seto's fixes
and scaling improvements.

Acked-by: Bob Picco <bob.picco@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-07-20 11:22:30 -07:00
Fenghua Yu 3bc207d2b7 [IA64] fsys_getcpu for IA64
On 1.6GHz Montectio Tiger4, the following performance data is measured with
kernel built with defconfig which has NUMA configured:

Fastest sys_getcpu: 502 itc counts.
Fastest fsys_getcpu: 28 itc counts.

fsys_getcpu performance is largly impacted by whether data (node_to_cpu_map
etc) is in cache. It can take fsys_getcpu up to ~150 itc counts in cold
cache case.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2007-03-07 16:27:09 -08:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Keith Owens d270acbc24 [IA64] Sanitize assembler code for ia64_sal_os_state
struct ia64_sal_os_state has three semi-independent sections.  The code
in mca_asm.S assumes that these three sections are contiguous, which
makes it very awkward to add new data to this structure.  Remove the
assumption that the sections are contiguous.  Define a macro to shorten
references to offsets in ia64_sal_os_state.

This patch does not change the way that the code behaves.  It just
makes it easier to update the code in future and to add fields to
ia64_sal_os_state when debugging the MCA/INIT handlers.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-06-21 14:44:26 -07:00
Tony Luck 82f1b07b9a [IA64] fix circular dependency on generation of asm-offsets.h
Fix?  One ugly hack is replaced by a different ugly hack.

Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-13 08:50:39 -07:00
Keith Owens 7f613c7d22 [PATCH] MCA/INIT: use per cpu stacks
The bulk of the change.  Use per cpu MCA/INIT stacks.  Change the SAL
to OS state (sos) to be per process.  Do all the assembler work on the
MCA/INIT stacks, leaving the original stack alone.  Pass per cpu state
data to the C handlers for MCA and INIT, which also means changing the
mca_drv interfaces slightly.  Lots of verification on whether the
original stack is usable before converting it to a sleeping process.

Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-09-11 14:08:41 -07:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00