Commit Graph

21 Commits

Author SHA1 Message Date
Atsushi Nemoto c44e8d5e47 [MIPS] prom_free_prom_memory cleanup
Current prom_free_prom_memory() implementations are almost same as
free_init_pages(), or no-op.  Make free_init_pages() extern (again)
and make prom_free_prom_memory() use it.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-06 16:53:09 +00:00
Atsushi Nemoto 97dcb82de6 [MIPS] Define MIPS_CPU_IRQ_BASE in generic header
The irq_base for {mips,rm7k,rm9k}_cpu_irq_init() are constant on all
platforms and are same value on most platforms (0 or 16, depends on
CONFIG_I8259).  Define them in asm-mips/mach-generic/irq.h and make
them customizable.  This will save a few cycle on each CPU interrupt.

A good side effect is removing some dependencies to MALTA in generic
SMTC code.

Although MIPS_CPU_IRQ_BASE is customizable, this patch changes irq
mappings on DDB5477, EMMA2RH and MIPS_SIM, since really customizing
them might cause some header dependency problem and there seems no
good reason to customize it.  So currently only VR41XX is using custom
MIPS_CPU_IRQ_BASE value, which is 0 regardless of CONFIG_I8259.

Testing this patch on those platforms is greatly appreciated.  Thank
you.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-02-06 16:53:08 +00:00
Yoichi Yuasa 56ae583330 [MIPS] Rewrite GALILEO_INL/GALILEO_OUTL to GT_READ/GT_WRITE
This patch has rewritten GALILEO_INL/GALILEO_OUTL using GT_READ/GT_WRITE.
This patch tested on Cobalt Qube2.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-11-30 01:14:43 +00:00
Ralf Baechle 27f768192f [MIPS] Cleanup unnecessary <asm/ptrace.h> inclusions.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-09 00:15:28 +01:00
Ralf Baechle 937a801576 [MIPS] Complete fixes after removal of pt_regs argument to int handlers.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-08 02:38:28 +01:00
Scott Ashcroft 5c90d528b2 [MIPS] Cobalt: Time runs too quickly
A kernel built with HZ==250 runs about 4 four times too quickly on a
Cobalt RaQ2.

Signed-off-by: Scott Ashcroft <scott.ashcroft@talk21.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-10-08 02:38:27 +01:00
Russell King bcf5111a58 [SERIAL] Remove wrong asm/serial.h inclusions
asm/serial.h is supposed to contain the definitions for the architecture
specific 8250 ports for the 8250 driver.  It may also define BASE_BAUD,
but this is the base baud for the architecture specific ports _only_.

Therefore, nothing other than the 8250 driver should be including this
header file.  In order to move towards this goal, here is a patch which
removes some of the more obvious incorrect includes of the file.

Acked-by: Paul Fulghum <paulkf@microgate.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-01 17:09:16 +01:00
Ralf Baechle 54d0a216f4 [MIPS] Replace board_timer_setup function pointer by plat_timer_setup.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

---
2006-07-13 21:26:17 +01:00
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Ralf Baechle 2925aba422 [MIPS] Cleanup memory managment initialization.
Historically plat_mem_setup did the entire platform initialization.  This
was rather impractical because it meant plat_mem_setup had to get away
without any kind of memory allocator.  To keep old code from breaking
plat_setup was just renamed to plat_setup and a second platform
initialization hook for anything else was introduced.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19 17:39:23 +01:00
Ralf Baechle 5e46c3aefe [MIPS] C99-ify struct resource initialization.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19 17:39:20 +01:00
Yoichi Yuasa 973c789742 [MIPS] Cobalt: Fix undefined reference to disable_early_printk.
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-06-19 17:39:14 +01:00
Ralf Baechle e4ac58afdf [MIPS] Rewrite all the assembler interrupt handlers to C.
Saves like 1,600 lines of code, is way easier to debug, compilers
frequently do a better job than the cut and paste type of handlers many
boards had.  And finally having all the stuff done in a single place
also means alot of bug potencial for the MT ASE is gone.

The only surviving handler in assembler is the DECstation one; I hope
Maciej will rewrite it.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-04-19 04:14:21 +02:00
Peter Horton e87dddeb92 [MIPS] Add early console for Cobalt.
Signed-off-by: Peter Horton <pdh@colonel-panic.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-03-21 13:27:44 +00:00
Linus Torvalds 17be03f0a1 Merge master.kernel.org:/home/rmk/linux-2.6-serial 2006-02-08 15:21:22 -08:00
Ralf Baechle 11ed6d5bb0 [MIPS] Rename include/asm-mips/cobalt to include/asm-mips/mach-cobalt.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07 13:30:22 +00:00
Ralf Baechle fcdb27ad1d [MIPS] Rename _machine_power_off to pm_power_off so the kernel builds again.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2006-02-07 13:30:22 +00:00
Russell King 59a675b220 [SERIAL] uart_port flags member should use UPF_*
Convert usage of ASYNC_* to UPF_*.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-05 10:52:29 +00:00
Ralf Baechle c4ed38a0c6 Resurrect Cobalt support for 2.6.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:30:42 +01:00
Ralf Baechle c83cfc9c94 Get rid of early_init. There's more need to make this form of
initialization actually useful and as is certainly unmergable with
upstream.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:30:18 +01:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00