Pull mqueue/bpf vfs cleanups from Al Viro:
"mqueue and bpf go through rather painful and similar contortions to
create objects in their dentry trees. Provide a primitive for doing
that without abusing ->mknod(), switch bpf and mqueue to it.
Another mqueue-related thing that has ended up in that branch is
on-demand creation of internal mount (based upon the work of Giuseppe
Scrivano)"
* 'work.mqueue' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
mqueue: switch to on-demand creation of internal mount
tidy do_mq_open() up a bit
mqueue: clean prepare_open() up
do_mq_open(): move all work prior to dentry_open() into a helper
mqueue: fold mq_attr_ok() into mqueue_get_inode()
move dentry_open() calls up into do_mq_open()
mqueue: switch to vfs_mkobj(), quit abusing ->d_fsdata
bpf_obj_do_pin(): switch to vfs_mkobj(), quit abusing ->mknod()
new primitive: vfs_mkobj()
Pull poll annotations from Al Viro:
"This introduces a __bitwise type for POLL### bitmap, and propagates
the annotations through the tree. Most of that stuff is as simple as
'make ->poll() instances return __poll_t and do the same to local
variables used to hold the future return value'.
Some of the obvious brainos found in process are fixed (e.g. POLLIN
misspelled as POLL_IN). At that point the amount of sparse warnings is
low and most of them are for genuine bugs - e.g. ->poll() instance
deciding to return -EINVAL instead of a bitmap. I hadn't touched those
in this series - it's large enough as it is.
Another problem it has caught was eventpoll() ABI mess; select.c and
eventpoll.c assumed that corresponding POLL### and EPOLL### were
equal. That's true for some, but not all of them - EPOLL### are
arch-independent, but POLL### are not.
The last commit in this series separates userland POLL### values from
the (now arch-independent) kernel-side ones, converting between them
in the few places where they are copied to/from userland. AFAICS, this
is the least disruptive fix preserving poll(2) ABI and making epoll()
work on all architectures.
As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and
it will trigger only on what would've triggered EPOLLWRBAND on other
architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered
at all on sparc. With this patch they should work consistently on all
architectures"
* 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits)
make kernel-side POLL... arch-independent
eventpoll: no need to mask the result of epi_item_poll() again
eventpoll: constify struct epoll_event pointers
debugging printk in sg_poll() uses %x to print POLL... bitmap
annotate poll(2) guts
9p: untangle ->poll() mess
->si_band gets POLL... bitmap stored into a user-visible long field
ring_buffer_poll_wait() return value used as return value of ->poll()
the rest of drivers/*: annotate ->poll() instances
media: annotate ->poll() instances
fs: annotate ->poll() instances
ipc, kernel, mm: annotate ->poll() instances
net: annotate ->poll() instances
apparmor: annotate ->poll() instances
tomoyo: annotate ->poll() instances
sound: annotate ->poll() instances
acpi: annotate ->poll() instances
crypto: annotate ->poll() instances
block: annotate ->poll() instances
x86: annotate ->poll() instances
...
Pull userns updates from Eric Biederman:
"Between the holidays and other distractions only a small amount of
namespace work made it into my tree this time.
Just a final cleanup from a revert several kernels ago and a small
typo fix from Wolffhardt Schwabe"
* 'userns-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
fix typo in assignment of fs default overflow gid
autofs4: Modify autofs_wait to use current_uid() and current_gid()
userns: Don't fail follow_automount based on s_user_ns
Pull siginfo cleanups from Eric Biederman:
"Long ago when 2.4 was just a testing release copy_siginfo_to_user was
made to copy individual fields to userspace, possibly for efficiency
and to ensure initialized values were not copied to userspace.
Unfortunately the design was complex, it's assumptions unstated, and
humans are fallible and so while it worked much of the time that
design failed to ensure unitialized memory is not copied to userspace.
This set of changes is part of a new design to clean up siginfo and
simplify things, and hopefully make the siginfo handling robust enough
that a simple inspection of the code can be made to ensure we don't
copy any unitializied fields to userspace.
The design is to unify struct siginfo and struct compat_siginfo into a
single definition that is shared between all architectures so that
anyone adding to the set of information shared with struct siginfo can
see the whole picture. Hopefully ensuring all future si_code
assignments are arch independent.
The design is to unify copy_siginfo_to_user32 and
copy_siginfo_from_user32 so that those function are complete and cope
with all of the different cases documented in signinfo_layout. I don't
think there was a single implementation of either of those functions
that was complete and correct before my changes unified them.
The design is to introduce a series of helpers including
force_siginfo_fault that take the values that are needed in struct
siginfo and build the siginfo structure for their callers. Ensuring
struct siginfo is built correctly.
The remaining work for 4.17 (unless someone thinks it is post -rc1
material) is to push usage of those helpers down into the
architectures so that architecture specific code will not need to deal
with the fiddly work of intializing struct siginfo, and then when
struct siginfo is guaranteed to be fully initialized change copy
siginfo_to_user into a simple wrapper around copy_to_user.
Further there is work in progress on the issues that have been
documented requires arch specific knowledge to sort out.
The changes below fix or at least document all of the issues that have
been found with siginfo generation. Then proceed to unify struct
siginfo the 32 bit helpers that copy siginfo to and from userspace,
and generally clean up anything that is not arch specific with regards
to siginfo generation.
It is a lot but with the unification you can of siginfo you can
already see the code reduction in the kernel"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (45 commits)
signal/memory-failure: Use force_sig_mceerr and send_sig_mceerr
mm/memory_failure: Remove unused trapno from memory_failure
signal/ptrace: Add force_sig_ptrace_errno_trap and use it where needed
signal/powerpc: Remove unnecessary signal_code parameter of do_send_trap
signal: Helpers for faults with specialized siginfo layouts
signal: Add send_sig_fault and force_sig_fault
signal: Replace memset(info,...) with clear_siginfo for clarity
signal: Don't use structure initializers for struct siginfo
signal/arm64: Better isolate the COMPAT_TASK portion of ptrace_hbptriggered
ptrace: Use copy_siginfo in setsiginfo and getsiginfo
signal: Unify and correct copy_siginfo_to_user32
signal: Remove the code to clear siginfo before calling copy_siginfo_from_user32
signal: Unify and correct copy_siginfo_from_user32
signal/blackfin: Remove pointless UID16_SIGINFO_COMPAT_NEEDED
signal/blackfin: Move the blackfin specific si_codes to asm-generic/siginfo.h
signal/tile: Move the tile specific si_codes to asm-generic/siginfo.h
signal/frv: Move the frv specific si_codes to asm-generic/siginfo.h
signal/ia64: Move the ia64 specific si_codes to asm-generic/siginfo.h
signal/powerpc: Remove redefinition of NSIGTRAP on powerpc
signal: Move addr_lsb into the _sigfault union for clarity
...
write_inode() could be called variety of reasons, in the case of syncfs(2)
there is no need to wait for flush getting completed in write_inode(),
->sync_fs is for guaranteeing flush completion for all inodes at that point.
Signed-off-by: Chengguang Xu <cgxu519@icloud.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Pull RCU updates from Ingo Molnar:
"The main RCU changes in this cycle were:
- Updates to use cond_resched() instead of cond_resched_rcu_qs()
where feasible (currently everywhere except in kernel/rcu and in
kernel/torture.c). Also a couple of fixes to avoid sending IPIs to
offline CPUs.
- Updates to simplify RCU's dyntick-idle handling.
- Updates to remove almost all uses of smp_read_barrier_depends() and
read_barrier_depends().
- Torture-test updates.
- Miscellaneous fixes"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
torture: Save a line in stutter_wait(): while -> for
torture: Eliminate torture_runnable and perf_runnable
torture: Make stutter less vulnerable to compilers and races
locking/locktorture: Fix num reader/writer corner cases
locking/locktorture: Fix rwsem reader_delay
torture: Place all torture-test modules in one MAINTAINERS group
rcutorture/kvm-build.sh: Skip build directory check
rcutorture: Simplify functions.sh include path
rcutorture: Simplify logging
rcutorture/kvm-recheck-*: Improve result directory readability check
rcutorture/kvm.sh: Support execution from any directory
rcutorture/kvm.sh: Use consistent help text for --qemu-args
rcutorture/kvm.sh: Remove unused variable, `alldone`
rcutorture: Remove unused script, config2frag.sh
rcutorture/configinit: Fix build directory error message
rcutorture: Preempt RCU-preempt readers more vigorously
torture: Reduce #ifdefs for preempt_schedule()
rcu: Remove have_rcu_nocb_mask from tree_plugin.h
rcu: Add comment giving debug strategy for double call_rcu()
tracing, rcu: Hide trace event rcu_nocb_wake when not used
...
Some of the info, warning, and error messages are missing their trailing
newline.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
The vfs clears the I_DIRTY inode flag before calling gfs2_write_inode()
having queued any data that needed to be written to disk.
This is a good time to remove such inodes from our ordered write list
so they don't hang around for long periods of time.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAlpvikQACgkQxWXV+ddt
WDs6qA//ZE7eEH0sKpD4Z+3gUevk/MMXwE9prRijEdjXz/K/UXtvpq0sI7HMQskZ
Ls9Wmzof+3WEQoa08RQZFzwuclW1Udm09SqE2oHP2gXQB5rC0BtWdrlMaKUJy03y
NUwxHetbE6TsFLU5HIVmi05NexNx9SVV6oJTWt00RlXTePw9Aoc88ikoXXUE2vqH
wbH9/ccmM9EkDFxdG+YG5QX054kQV8/5RXdqBJnIiGVRX5ZsAY84AN9x9YoRCVUw
wq9TfPu6XmeA6Uq6knpeLlXDms5w+FE3n5CduROk7Q7YNgpoZekF20c8uK8HzT4T
KF8hc0QpQgRCVBJ8I4MbPSMRIDf3IWfZmWSDEDda/6/ep6Bl99b8PFvdDKDBMUct
8wsgGrwGbHuz2l2QUIXjpBL9Cv9Tbu8vjmg0h2hFrpiH1c8JaXjKtJXAMtigWsZ1
DdX+5Y0zqvV/YLpzKF4aMDWXIteN4qaznvjdmj3B7BxgcnITOV/cmPCyMplNrtUa
Cs2fzGV5tpxhBzxE490v+frMULmLq2W1e6WPfFCqPKBCqulcR75TozDQS9M2/h4k
uAZzVKoguHrUPP1ONVas9aVC05K473nbYPd28eecYwkZ4z32hK4SAdnQY1aPreTe
axoV7p7a+i1bkzT5LK6gIfpddVWth8w45nz4P0lwxp0Z6XlkbJE=
=Irul
-----END PGP SIGNATURE-----
Merge tag 'for-4.16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"Features or user visible changes:
- fallocate: implement zero range mode
- avoid losing data raid profile when deleting a device
- tree item checker: more checks for directory items and xattrs
Notable fixes:
- raid56 recovery: don't use cached stripes, that could be
potentially changed and a later RMW or recovery would lead to
corruptions or failures
- let raid56 try harder to rebuild damaged data, reading from all
stripes if necessary
- fix scrub to repair raid56 in a similar way as in the case above
Other:
- cleanups: device freeing, removed some call indirections, redundant
bio_put/_get, unused parameters, refactorings and renames
- RCU list traversal fixups
- simplify mount callchain, remove recursing back when mounting a
subvolume
- plug for fsync, may improve bio merging on multiple devices
- compression heurisic: replace heap sort with radix sort, gains some
performance
- add extent map selftests, buffered write vs dio"
* tag 'for-4.16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (155 commits)
btrfs: drop devid as device_list_add() arg
btrfs: get device pointer from device_list_add()
btrfs: set the total_devices in device_list_add()
btrfs: move pr_info into device_list_add
btrfs: make btrfs_free_stale_devices() to match the path
btrfs: rename btrfs_free_stale_devices() arg to skip_dev
btrfs: make btrfs_free_stale_devices() argument optional
btrfs: make btrfs_free_stale_device() to iterate all stales
btrfs: no need to check for btrfs_fs_devices::seeding
btrfs: Use IS_ALIGNED in btrfs_truncate_block instead of opencoding it
Btrfs: noinline merge_extent_mapping
Btrfs: add WARN_ONCE to detect unexpected error from merge_extent_mapping
Btrfs: extent map selftest: dio write vs dio read
Btrfs: extent map selftest: buffered write vs dio read
Btrfs: add extent map selftests
Btrfs: move extent map specific code to extent_map.c
Btrfs: add helper for em merge logic
Btrfs: fix unexpected EEXIST from btrfs_get_extent
Btrfs: fix incorrect block_len in merge_extent_mapping
btrfs: Remove unused readahead spinlock
...
-----BEGIN PGP SIGNATURE-----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=b4Ed
-----END PGP SIGNATURE-----
Merge tag '4.16-rc-SMB3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
"Some fixes for stable, fixed SMB3 DFS support, SMB3 Direct (RDMA) and
various bug fixes and cleanup"
* tag '4.16-rc-SMB3' of git://git.samba.org/sfrench/cifs-2.6: (60 commits)
fs/cifs/cifsacl.c Fixes typo in a comment
update internal version number for cifs.ko
cifs: add .splice_write
CIFS: document tcon/ses/server refcount dance
move a few externs to smbdirect.h to eliminate warning
CIFS: zero sensitive data when freeing
Cleanup some minor endian issues in smb3 rdma
CIFS: dump IPC tcon in debug proc file
CIFS: use tcon_ipc instead of use_ipc parameter of SMB2_ioctl
CIFS: make IPC a regular tcon
cifs: remove redundant duplicated assignment of pointer 'node'
CIFS: SMBD: work around gcc -Wmaybe-uninitialized warning
cifs: Fix autonegotiate security settings mismatch
CIFS: SMBD: _smbd_get_connection() can be static
CIFS: SMBD: Disable signing on SMB direct transport
CIFS: SMBD: Add SMB Direct debug counters
CIFS: SMBD: Upper layer performs SMB read via RDMA write through memory registration
CIFS: SMBD: Read correct returned data length for RDMA write (SMB read) I/O
CIFS: SMBD: Upper layer performs SMB write via RDMA read through memory registration
CIFS: SMBD: Implement RDMA memory registration
...
-----BEGIN PGP SIGNATURE-----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=iihN
-----END PGP SIGNATURE-----
Merge tag 'iversion-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull inode->i_version rework from Jeff Layton:
"This pile of patches is a rework of the inode->i_version field. We
have traditionally incremented that field on every inode data or
metadata change. Typically this increment needs to be logged on disk
even when nothing else has changed, which is rather expensive.
It turns out though that none of the consumers of that field actually
require this behavior. The only real requirement for all of them is
that it be different iff the inode has changed since the last time the
field was checked.
Given that, we can optimize away most of the i_version increments and
avoid dirtying inode metadata when the only change is to the i_version
and no one is querying it. Queries of the i_version field are rather
rare, so we can help write performance under many common workloads.
This patch series converts existing accesses of the i_version field to
a new API, and then converts all of the in-kernel filesystems to use
it. The last patch in the series then converts the backend
implementation to a scheme that optimizes away a large portion of the
metadata updates when no one is looking at it.
In my own testing this series significantly helps performance with
small I/O sizes. I also got this email for Christmas this year from
the kernel test robot (a 244% r/w bandwidth improvement with XFS over
DAX, with 4k writes):
https://lkml.org/lkml/2017/12/25/8
A few of the earlier patches in this pile are also flowing to you via
other trees (mm, integrity, and nfsd trees in particular)".
* tag 'iversion-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: (22 commits)
fs: handle inode->i_version more efficiently
btrfs: only dirty the inode in btrfs_update_time if something was changed
xfs: avoid setting XFS_ILOG_CORE if i_version doesn't need incrementing
fs: only set S_VERSION when updating times if necessary
IMA: switch IMA over to new i_version API
xfs: convert to new i_version API
ufs: use new i_version API
ocfs2: convert to new i_version API
nfsd: convert to new i_version API
nfs: convert to new i_version API
ext4: convert to new i_version API
ext2: convert to new i_version API
exofs: switch to new i_version API
btrfs: convert to new i_version API
afs: convert to new i_version API
affs: convert to new i_version API
fat: convert to new i_version API
fs: don't take the i_lock in inode_inc_iversion
fs: new API for handling inode->i_version
ntfs: remove i_version handling
...
- Usage of new fscrypt APIs
- A fix for a Fastmap issue
- Other minor bug fixes
-----BEGIN PGP SIGNATURE-----
iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAlpl68kWHHJpY2hhcmRA
c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wX3vEADXb7aCdL87y5FxML3UTpGHoIU8
TYTO58WsWdBV32WbROq0F3c6QADYnJt3+oZuCsSYIwqZP2+7rry4Jg8K39F5JDS6
UxQYUoKLtAoCdou9AQfE4ilFIONbZSdSDnB7Dsc/UQiLKaFtZhGZBSocwAmA5moe
8Jp6uhhbr91CrVwhek/+PJxdzoBoj2DAW3/kH7z6VD6klY5nS9t7AJobxHE5eKO1
nv1Fc1y1Q8E22KuJ7SuBFny/k2BXl0jPbl898+yw0vThqV2QHmha9uM7Tk70Ek1/
pRQJUiJ8ljxeix5oKCNjbirvdN4TgHWCZAg4YNOoxDYTNzGIMGfXjUojlnUO3hAp
WLDFo5nOxL8C/ak7quql49/JtSbN/6esBZqOnZh60kvA9LOngggPOBonBrJ93+Vc
ui6VdJN69Og7Efb8UlOYCONUl70rT7EupZqjPLNKkQp2jGCE683szFtDFkNBlcnn
fQKnp8IOpWanw2A1z5EtPlfJaFUk2tj0CbgOWgyVb8bkIvqH1d9H67o12DrODFsr
LGe1icv+jy4qyc76XO79EMyitOObsa6n5j9bfe0fuECJZMBcp/cWlcVusrSQJ+KN
Onyhi8O4sMeWVbED+N5Xb+ozdnrnls2Urb1L3+GCDdKlSKlgsXGDreLiLaNuQJs0
peYomh6Wl3urHERflg==
=+cCd
-----END PGP SIGNATURE-----
Merge tag 'upstream-4.16-rc1' of git://git.infradead.org/linux-ubifs
Pull UBI/UBIFS updates from Richard Weinberger:
- use the new fscrypt APIs
- a fix for a Fastmap issue
- other minor bug fixes
* tag 'upstream-4.16-rc1' of git://git.infradead.org/linux-ubifs:
ubi: block: Fix locking for idr_alloc/idr_remove
mtd: ubi: wl: Fix error return code in ubi_wl_init()
ubi: Fix copy/paste error in function documentation
ubi: Fastmap: Fix typo
ubifs: remove error message in ubifs_xattr_get
ubi: fastmap: Erase outdated anchor PEBs during attach
ubifs: switch to fscrypt_prepare_setattr()
ubifs: switch to fscrypt_prepare_lookup()
ubifs: switch to fscrypt_prepare_rename()
ubifs: switch to fscrypt_prepare_link()
ubifs: switch to fscrypt_file_open()
ubi: fastmap: Clean up the initialization of pointer p
ubi: fastmap: Use kmem_cache_free to deallocate memory
ubi: Fix race condition between ubi volume creation and udev
mtd: ubi: Use 'max_bad_blocks' to compute bad_peb_limit if available
ubifs: Fix uninitialized variable in search_dh_cookie()
Pull block updates from Jens Axboe:
"This is the main pull request for block IO related changes for the
4.16 kernel. Nothing major in this pull request, but a good amount of
improvements and fixes all over the map. This contains:
- BFQ improvements, fixes, and cleanups from Angelo, Chiara, and
Paolo.
- Support for SMR zones for deadline and mq-deadline from Damien and
Christoph.
- Set of fixes for bcache by way of Michael Lyle, including fixes
from himself, Kent, Rui, Tang, and Coly.
- Series from Matias for lightnvm with fixes from Hans Holmberg,
Javier, and Matias. Mostly centered around pblk, and the removing
rrpc 1.2 in preparation for supporting 2.0.
- A couple of NVMe pull requests from Christoph. Nothing major in
here, just fixes and cleanups, and support for command tracing from
Johannes.
- Support for blk-throttle for tracking reads and writes separately.
From Joseph Qi. A few cleanups/fixes also for blk-throttle from
Weiping.
- Series from Mike Snitzer that enables dm to register its queue more
logically, something that's alwways been problematic on dm since
it's a stacked device.
- Series from Ming cleaning up some of the bio accessor use, in
preparation for supporting multipage bvecs.
- Various fixes from Ming closing up holes around queue mapping and
quiescing.
- BSD partition fix from Richard Narron, fixing a problem where we
can't mount newer (10/11) FreeBSD partitions.
- Series from Tejun reworking blk-mq timeout handling. The previous
scheme relied on atomic bits, but it had races where we would think
a request had timed out if it to reused at the wrong time.
- null_blk now supports faking timeouts, to enable us to better
exercise and test that functionality separately. From me.
- Kill the separate atomic poll bit in the request struct. After
this, we don't use the atomic bits on blk-mq anymore at all. From
me.
- sgl_alloc/free helpers from Bart.
- Heavily contended tag case scalability improvement from me.
- Various little fixes and cleanups from Arnd, Bart, Corentin,
Douglas, Eryu, Goldwyn, and myself"
* 'for-4.16/block' of git://git.kernel.dk/linux-block: (186 commits)
block: remove smart1,2.h
nvme: add tracepoint for nvme_complete_rq
nvme: add tracepoint for nvme_setup_cmd
nvme-pci: introduce RECONNECTING state to mark initializing procedure
nvme-rdma: remove redundant boolean for inline_data
nvme: don't free uuid pointer before printing it
nvme-pci: Suspend queues after deleting them
bsg: use pr_debug instead of hand crafted macros
blk-mq-debugfs: don't allow write on attributes with seq_operations set
nvme-pci: Fix queue double allocations
block: Set BIO_TRACE_COMPLETION on new bio during split
blk-throttle: use queue_is_rq_based
block: Remove kblockd_schedule_delayed_work{,_on}()
blk-mq: Avoid that blk_mq_delay_run_hw_queue() introduces unintended delays
blk-mq: Rename blk_mq_request_direct_issue() into blk_mq_request_issue_directly()
lib/scatterlist: Fix chaining support in sgl_alloc_order()
blk-throttle: track read and write request individually
block: add bdev_read_only() checks to common helpers
block: fail op_is_write() requests to read-only partitions
blk-throttle: export io_serviced_recursive, io_service_bytes_recursive
...
As struct btrfs_disk_super is being passed, so it can get devid
the same way its parent does.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Instead of pointer to btrfs_fs_devices as an arg in device_list_add()
better to get pointer to btrfs_device as return value, then we have
both, pointer to btrfs_device and btrfs_fs_devices. btrfs_device is
needed to handle reappearing missing device.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
ceph_reserve_caps() may not reserve enough caps under high memory
pressure, but it saved the needed caps number that expected to
be reserved. When getting caps, crash would happen due to number
mismatch.
Now we will try to trim more caps when failing to allocate memory
for caps need to be reserved, then try again. If still failing to
allocate memory, return -ENOMEM.
Signed-off-by: Zhi Zhang <zhang.david2011@gmail.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When called with CHECK_CAPS_AUTHONLY flag, ceph_check_caps() only
processes auth caps. In that case, it's unsafe to remove inode
from mdsc->cap_delay_list, because there can be delayed non-auth
caps.
Besides, ceph_check_caps() may lock/unlock i_ceph_lock several
times, when multiple threads call ceph_check_caps() at the same
time. It's possible that one thread calls __cap_delay_requeue(),
another thread calls __cap_delay_cancel(). __cap_delay_cancel()
should be called at very beginning of ceph_check_caps(), so that
it does not race with __cap_delay_requeue().
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Previously ceph_read_iter() uses current->journal to pass context info
to ceph_readpages(), so that ceph_readpages() can distinguish read(2)
from readahead(2)/fadvise(2)/madvise(2). The problem is that page fault
can happen when copying data to userspace memory. Page fault may call
other filesystem's page_mkwrite() if the userspace memory is mapped to a
file. The later filesystem may also want to use current->journal.
The fix is define a on-stack data structure in ceph_read_iter(), add it
to context list in ceph_file_info. ceph_readpages() searches the list,
find if there is a context belongs to current thread.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Readdir cache keeps array of dentry pointers in page cache. If any
dentry in readdir cache gets pruned, ceph_d_prune() disables readdir
cache for later readdir syscall. The problem is that ceph_d_prune()
ignores unhashed dentry. Ideally MDS should have already revoked
CEPH_CAP_FILE_SHARED (which also disables readdir cache) when dentry
gets unhashed. But if it is somehow MDS does not properly revoke
CEPH_CAP_FILE_SHARED and the unhashed dentry gets pruned later,
ceph_d_prune() will not disable readdir cache, later readdir may
reference invalid dentry pointer.
The fix is make ceph_d_prune() do extra check for unhashed dentry.
Disable readdir cache if the unhashed dentry is still referenced
by readdir cache.
Another fix in this patch is handle d_splice_alias(). If a dentry
gets spliced into new parent dentry, treat it as if it was pruned
(call ceph_d_prune() for it).
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
It allows accessing i_shared_gen without holding i_ceph_lock. It is
preparation for later patch.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
ceph_fill_trace() already calls ceph_invalidate_dir_request() for
traceless reply. No need to duplicate the code in ceph_rename().
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For CEPH_SETATTR_ATIME, MDS needs to xlock filelock, Fsxrw caps
are not allowed for xlocked filelock.
For CEPH_SETATTR_SIZE request that truncates file to smaller size,
MDS needs to xlock filelock, Fsxrw caps are not allowed for xlocked
filelock.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
MDS need to rdlock directory inode's authlock when handling these
requests. Voluntarily dropping CEPH_CAP_AUTH_EXCL avoids a cap revoke
message.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Before this patch, if function gfs2_unlink failed to get a valid
transaction (for example, not enough journal blocks) it would go
to label out_end_trans which did gfs2_trans_end. But if the
trans_begin failed, there's no transaction to end, and trying to
do so results in: kernel BUG at fs/gfs2/trans.c:117!
This patch changes the goto so that it does not try to end a
non-existent transaction.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
But reject reflink + DAX file systems for now until the code to
support reflinks on DAX is actually implemented.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: port to 4.16]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_bmap_btalloc is given a range of file offset blocks that must be
allocated to some data/attr/cow fork. If the fork has an extent size
hint associated with it, the request will be enlarged on both ends to
try to satisfy the alignment hint. If free space is fragmentated,
sometimes we can allocate some blocks but not enough to fulfill any of
the requested range. Since bmapi_allocate always trims the new extent
mapping to match the originally requested range, this results in
bmapi_write returning zero and no mapping.
The consequences of this vary -- buffered writes will simply re-call
bmapi_write until it can satisfy at least one block from the original
request. Direct IO overwrites notice nmaps == 0 and return -ENOSPC
through the dio mechanism out to userspace with the weird result that
writes fail even when we have enough space because the ENOSPC return
overrides any partial write status. For direct CoW writes the situation
was disastrous because nobody notices us returning an invalid zero-length
wrong-offset mapping to iomap and the write goes off into space.
Therefore, if free space is so fragmented that we managed to allocate
some space but not enough to map into even a single block of the
original allocation request range, we should break the alignment hint in
order to guarantee at least some forward progress for the direct write.
If we return a short allocation to iomap_apply it'll call back about the
remaining blocks.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
There's a really bad bug in xfs_reflink_allocate_cow -- if bmapi_write
can return a zero error code but no mappings. This happens if there's
an extent size hint (which causes allocation requests to be rounded to
extsz granularity internally), but there wasn't a big enough chunk of
free space to start filling at the extsz granularity and fill even one
block of the range that we actually requested.
In any case, if we got no mappings we can't possibly do anything useful
with the contents of imap, so we must bail out with ENOSPC here.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Don't let the iomap callback get away with feeding us a garbage zero
length mapping -- there was a bug in xfs that resulted in those leaking
out to hilarious effect.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Since the CoW fork only exists in memory, it is incorrect to update the
on-disk quota block counts when we modify the CoW fork. Unlike the data
fork, even real extents in the CoW fork are only delalloc-style
reservations (on-disk they're owned by the refcountbt) so they must not
be tracked in the on disk quota info. Ensure the i_delayed_blks
accounting reflects this too.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reflink and dedupe operations remap blocks from a source file into a
destination file. The destination file needs exclusive locks on all
levels because we're updating its block map, but the source file isn't
undergoing any block map changes so we can use a shared lock.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Refactor xfs_lock_two_inodes to take separate locking modes for each
inode. Specifically, this enables us to take a SHARED lock on one inode
and an EXCL lock on the other. The lock class (MMAPLOCK/ILOCK) must be
the same for each inode.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Before we share blocks between files, we need to break the pnfs leases
on the layout before we start slicing and dicing the block map. The
structure of this function sets us up for the lock contention reduction
in the next patch.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Even if we can't use the inobt/finobt cursors to count the number of
inode btree blocks, we are never allowed to clobber the cursor of the
btree being checked, so don't do this. Found by fuzzing level = ones
in xfs/364.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Every so often we blow the ASSERT(type != XFS_IO_COW) in xfs_map_blocks
when running fsstress, as we do in generic/269. The cause of this is
writeback racing with truncate -- writeback doesn't take the iolock, so
truncate can sneak in to decrease i_size and truncate page cache while
writeback is gathering buffer heads to schedule writeout.
If we hit this race on a block that has a CoW mapping, we'll get a valid
imap from the CoW fork but the reduced i_size trims the mapping to zero
length (which makes it invalid), so we call xfs_map_blocks to try again.
This doesn't do much anyway, since any mapping we get out of that will
also be invalid, so we might as well skip the assert and just stop.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Commit 66f364649d ("xfs: remove if_rdev") moved storing of rdev
value for special inodes to VFS inodes, but forgot to preserve the
value of i_rdev when recycling a reclaimable xfs_inode.
This was detected by xfstest overlay/017 with inodex=on mount option
and xfs base fs. The test does a lookup of overlay chardev and blockdev
right after drop caches.
Overlayfs inodes hold a reference on underlying xfs inodes when mount
option index=on is configured. If drop caches reclaim xfs inodes, before
it relclaims overlayfs inodes, that can sometimes leave a reclaimable xfs
inode and that test hits that case quite often.
When that happens, the xfs inode cache remains broken (zere i_rdev)
until the next cycle mount or drop caches.
Fixes: 66f364649d ("xfs: remove if_rdev")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move all the inode and quota accounting updates out of xfs_bmap_btalloc
in preparation for fixing some quota accounting problems with copy on
write.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Refactor inode verifier error reporting into a non-libxfs function so
that we aren't encoding the message format in libxfs. This also
changes the kernel dmesg output to resemble buffer verifier errors
more closely.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fix all the inode number formats to be consistently (0x%llx) in all
trace point definitions.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Always zero the di_flags2 field when we free the inode so that we never
end up with an on-disk record for an unallocated inode that also has the
reflink iflag set. This is in keeping with the general principle that
only files can have the reflink iflag set, even though we'll zero out
di_flags2 if we ever reallocate the inode.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Ensure that we've attached all the necessary dquots before performing
reflink operations so that quota accounting is accurate.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Remove the extent size hint and realtime inode relevant code from
the xfs_bmapi_reserve_delalloc since it is not called on the inode
with extent size hint set or on a realtime inode.
Signed-off-by: Shan Hai <shan.hai@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that buffer's b_fspriv has been split, just replace the current
singly linked list of xfs_log_items, by the list_head infrastructure.
Also, remove the xfs_log_item argument from xfs_buf_resubmit_failed_buffers(),
there is no need for this argument, once the log items can be walked
through the list_head in the buffer.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: minor style cleanups]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
By splitting the b_fspriv field into two different fields (b_log_item
and b_li_list). It's possible to get rid of an old ABI workaround, by
using the new b_log_item field to store xfs_buf_log_item separated from
the log items attached to the buffer, which will be linked in the new
b_li_list field.
This way, there is no more need to reorder the log items list to place
the buf_log_item at the beginning of the list, simplifying a bit the
logic to handle buffer IO.
This also opens the possibility to change buffer's log items list into a
proper list_head.
b_log_item field is still defined as a void *, because it is still used
by the log buffers to store xlog_in_core structures, and there is no
need to add an extra field on xfs_buf just for xlog_in_core.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: minor style changes]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Take advantage of the rework on xfs_buf log items list, to get rid of
ths typedef for xfs_buf_log_item.
This patch also fix some indentation alignment issues found along the way.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
At this point, we know that "now" and the file times may differ, and we
suspect that the i_version has been flagged to be bumped. Attempt to
bump the i_version, and only mark the inode dirty if that actually
occurred or if one of the times was updated.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
If XFS_ILOG_CORE is already set then go ahead and increment it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
We only really need to update i_version if someone has queried for it
since we last incremented it. By doing that, we can avoid having to
update the inode if the times haven't changed.
If the times have changed, then we go ahead and forcibly increment the
counter, under the assumption that we'll be going to the storage
anyway, and the increment itself is relatively cheap.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
For NFS, we just use the "raw" API since the i_version is mostly
managed by the server. The exception there is when the client
holds a write delegation, but we only need to bump it once
there anyway to handle CB_GETATTR.
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
For AFS, it's generally treated as an opaque value, so we use the
*_raw variants of the API here.
Note that AFS has quite a different definition for this counter. AFS
only increments it on changes to the data to the data in regular files
and contents of the directories. Inode metadata changes do not result
in a version increment.
We'll need to reconcile that somehow if we ever want to present this to
userspace via statx.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Add a documentation blob that explains what the i_version field is, how
it is expected to work, and how it is currently implemented by various
filesystems.
We already have inode_inc_iversion. Add several other functions for
manipulating and accessing the i_version counter. For now, the
implementation is trivial and basically works the way that all of the
open-coded i_version accesses work today.
Future patches will convert existing users of i_version to use the new
API, and then convert the backend implementation to do things more
efficiently.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
When locking the file in order to do O_DIRECT on it, we must unmap
any mmapped ranges on the pagecache so that we can flush out the
dirty data.
Fixes: a5864c999d ("NFS: Do not serialise O_DIRECT reads and writes")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org # v4.8+
add splice_write support in cifs vfs using iter_file_splice_write
Signed-off-by: Andrés Souto <kai670@gmail.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Quiet minor sparse warnings in new SMB3 rdma patch series
("symbol was not declared ...") by moving these externs to smbdirect.h
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
also replaces memset()+kfree() by kzfree().
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Cc: <stable@vger.kernel.org>
Minor cleanup of some sparse warnings (including a few misc
endian fixes for the new smb3 rdma code)
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
dump it as first share with an "IPC: " prefix.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Since IPC now has a tcon object, the caller can just pass it. This
allows domain-based DFS requests to work with smb2+.
Link: https://bugzilla.samba.org/show_bug.cgi?id=12917
Fixes: 9d49640a21 ("CIFS: implement get_dfs_refer for SMB2+")
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
* Remove ses->ipc_tid.
* Make IPC$ regular tcon.
* Add a direct pointer to it in ses->tcon_ipc.
* Distinguish PIPE tcon from IPC tcon by adding a tcon->pipe flag. All
IPC tcons are pipes but not all pipes are IPC.
* All TreeConnect functions now cannot take a NULL tcon object.
The IPC tcon has the same lifetime as the session it belongs to. It is
created when the session is created and destroyed when the session is
destroyed.
Since no mounts directly refer to the IPC tcon, its refcount should
always be set to initialisation value (1). Thus we make sure
cifs_put_tcon() skips it.
If the mount request resulting in a new session being created requires
encryption, try to require it too for IPC.
* set SERVER_NAME_LENGTH to serverName actual size
The maximum length of an ipv6 string representation is defined in
INET6_ADDRSTRLEN as 45+1 for null but lets keep what we know works.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
After do_readv_writev, the inode cache is invalidated anyway, so i_size
will never be read. It will be fetched from the server which will also
know about updates from other machines.
Fixes deadlock on 32-bit SMP.
See https://marc.info/?l=linux-fsdevel&m=151268557427760&w=2
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mike Marshall <hubcap@omnibond.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit e76004093d ("fs/buffer.c: remove unnecessary init
operation after allocating buffer_head"), there are no callers of
init_buffer() outside of init_page_buffers(). So just fold it into
init_page_buffers().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Since commit 9c630ebefe ("ovl: simplify permission checking"),
overlayfs doesn't call __inode_permission() anymore, which leaves no
users other than inode_permission(). So just fold it back into
inode_permission().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch adds creation time field in inode layout to support showing
kstat.btime in ->statx.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It's possible that the device map is smaller than the offset into the device
for the I/O we're adding. Add a check for it and bail out, otherwise we
risk botching the bio calculations that follow.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trondmy@gmail.com>
This patch rebuild sit page from sit info in mem instead
of issue a read io.
I test this method and the result is as below:
Pre:
mmc_perf_test-12061 [001] ...1 976.819992: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-12061 [001] ...1 976.856446: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-12061 [003] ...1 998.976946: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-12061 [003] ...1 999.023269: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-12061 [003] ...1 1022.060772: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-12061 [003] ...1 1022.111034: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-12061 [002] ...1 1070.127643: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-12061 [003] ...1 1070.187352: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-12061 [003] ...1 1095.942124: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-12061 [003] ...1 1095.995975: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-12061 [003] ...1 1122.535091: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-12061 [003] ...1 1122.586521: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-12061 [001] ...1 1147.897487: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-12061 [001] ...1 1147.959438: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-12061 [003] ...1 1177.926951: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-12061 [002] ...1 1177.976823: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-12061 [002] ...1 1204.176087: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-12061 [002] ...1 1204.239046: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
Some sit flush consume more than 50ms.
Now:
mmc_perf_test-2187 [007] ...1 196.840684: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187 [007] ...1 196.841258: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187 [007] ...1 219.430582: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187 [007] ...1 219.431144: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187 [002] ...1 243.638678: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187 [000] ...1 243.638980: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187 [002] ...1 265.392180: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187 [002] ...1 265.392245: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187 [000] ...1 290.309051: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187 [000] ...1 290.309116: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187 [003] ...1 317.144209: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187 [003] ...1 317.145913: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187 [005] ...1 343.224954: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187 [005] ...1 343.225574: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187 [000] ...1 370.239846: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187 [000] ...1 370.241138: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187 [001] ...1 397.029043: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187 [001] ...1 397.030750: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
mmc_perf_test-2187 [003] ...1 425.386377: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit
mmc_perf_test-2187 [003] ...1 425.387735: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit
Most sit flush consume no more than 1ms.
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If filesystem is readonly, stop to issue discard in daemon.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Remove duplicated codes of assignment for .max_requests and .io_aware_gran.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EOAu
-----END PGP SIGNATURE-----
Merge tag 'for-4.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"It's been reported recently that readdir can list stale entries under
some conditions. Fix it."
* tag 'for-4.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix stale entries in readdir
Node is assigned twice to rb_first(root), first during declaration
time and second after a taking a spin lock, so we have a duplicated
assignment. Remove the first assignment because it is redundant and
also not protected by the spin lock.
Cleans up clang warning:
fs/cifs/connect.c:4435:18: warning: Value stored to 'node' during
its initialization is never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
GCC versions from 4.9 to 6.3 produce a false-positive warning when
dealing with a conditional spin_lock_irqsave():
fs/cifs/smbdirect.c: In function 'smbd_recv_buf':
include/linux/spinlock.h:260:3: warning: 'flags' may be used uninitialized in this function [-Wmaybe-uninitialized]
This function calls some sleeping interfaces, so it is clear that it
does not get called with interrupts disabled and there is no need
to save the irq state before taking the spinlock. This lets us
remove the variable, which makes the function slightly more efficient
and avoids the warning.
A further cleanup could do the same change for other functions in this
file, but I did not want to take this too far for now.
Fixes: ac69f66e54ca ("CIFS: SMBD: Implement function to receive data via RDMA receive")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steve French <smfrench@gmail.com>
Autonegotiation gives a security settings mismatch error if the SMB
server selects an SMBv3 dialect that isn't SMB3.02. The exact error is
"protocol revalidation - security settings mismatch".
This can be tested using Samba v4.2 or by setting the global Samba
setting max protocol = SMB3_00.
The check that fails in smb3_validate_negotiate is the dialect
verification of the negotiate info response. This is because it tries
to verify against the protocol_id in the global smbdefault_values. The
protocol_id in smbdefault_values is SMB3.02.
In SMB2_negotiate the protocol_id in smbdefault_values isn't updated,
it is global so it probably shouldn't be, but server->dialect is.
This patch changes the check in smb3_validate_negotiate to use
server->dialect instead of server->vals->protocol_id. The patch works
with autonegotiate and when using a specific version in the vers mount
option.
Signed-off-by: Daniel N Pettersson <danielnp@axis.com>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Fixes: 07495ff5d9bc ("CIFS: SMBD: Establish SMB Direct connection")
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Long Li <longli@microsoft.com>
Currently the CIFS SMB Direct implementation (experimental) doesn't properly
support signing. Disable it when SMB Direct is in use for transport.
Signing will be enabled in future after it is implemented.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
For debugging and troubleshooting, export SMBDirect debug counters to
/proc/fs/cifs/DebugData.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
If I/O size is larger than rdma_readwrite_threshold, use RDMA write for
SMB read by specifying channel SMB2_CHANNEL_RDMA_V1 or
SMB2_CHANNEL_RDMA_V1_INVALIDATE in the SMB packet, depending on SMB dialect
used. Append a smbd_buffer_descriptor_v1 to the end of the SMB packet and fill
in other values to indicate this SMB read uses RDMA write.
There is no need to read from the transport for incoming payload. At the time
SMB read response comes back, the data is already transferred and placed in the
pages by RDMA hardware.
When SMB read is finished, deregister the memory regions if RDMA write is used
for this SMB read. smbd_deregister_mr may need to do local invalidation and
sleep, if server remote invalidation is not used.
There are situations where the MID may not be created on I/O failure, under
which memory region is deregistered when read data context is released.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
This patch is for preparing upper layer doing SMB read via RDMA write.
When RDMA write is used for SMB read, the returned data length is in
DataRemaining in the response packet. Reading it properly by adding a
parameter to specifiy where the returned data length is.
Add the defition for memory registration to wdata and return the correct
length based on if RDMA write is used.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
When sending I/O, if size is larger than rdma_readwrite_threshold we prepare
to send SMB write packet for a RDMA read via memory registration. The actual
I/O is done by remote peer through local RDMA hardware. Modify the relevant
fields in the packet accordingly, and append a smbd_buffer_descriptor_v1 to
the end of the SMB write packet.
On write I/O finish, deregister the memory region if this was for a RDMA read.
If remote invalidation is not used, the call to smbd_deregister_mr will do
local invalidation and possibly wait. Memory region is normally deregistered
in MID callback as soon as it's used. There are situations where the MID may
not be created on I/O failure, under which memory region is deregistered when
write data context is released.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Memory registration is used for transferring payload via RDMA read or write.
After I/O is done, memory registrations are recovered and reused. This
process can be time consuming and is done in a work queue.
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
With SMB Direct connected, use it for sending data via RDMA send.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
The transport doesn't maintain send buffers or send queue for transferring
payload via RDMA send. There is no data copy in the transport on send.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
With SMB Direct connected, use it for receiving data via RDMA receive.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
On the receive path, the transport maintains receive buffers and a reassembly
queue for transferring payload via RDMA recv. There is data copy in the
transport on recv when it copies the payload to upper layer.
The transport recognizes the RFC1002 header length use in the SMB
upper layer payloads in CIFS. Because this length is mainly used for TCP and
not applicable to RDMA, it is handled as a out-of-band information and is
never sent over the wire, and the trasnport behaves like TCP to upper layer
by processing and exposing the length correctly on data payloads.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
When connecting over SMB Direct, the transport negotiates its maximum I/O sizes
with the server and determines how to choose to do RDMA send/recv vs
read/write. Expose these maximum I/O sizes to upper layer so we will get the
correct sized payloads.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
When upper layer wants to umount, make it call shutdown on transport when
SMB Direct is used.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Add function to tear down a SMB Direct connection. This is used by upper layer
to free all SMB Direct connection and transport resources.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Do a reconnect on SMB Direct when it is used as the connection. Reconnect can
happen for many reasons and it's mostly the decision of SMB2 upper layer.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Add function to implement a reconnect to SMB Direct. This involves tearing down
the current connection and establishing/negotiating a new connection.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
When "rdma" is specified in the mount option, make CIFS connect to
SMB Direct.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Prevent build errors when CIFS=y and INFINIBAND=m.
fs/cifs/smbdirect.o: In function `smbd_qp_async_error_upcall':
smbdirect.c:(.text+0x28c): undefined reference to `ib_event_msg'
fs/cifs/smbdirect.o: In function `smbd_destroy_rdma_work':
smbdirect.c:(.text+0xfde): undefined reference to `ib_drain_qp'
smbdirect.c:(.text+0xfea): undefined reference to `rdma_destroy_qp'
smbdirect.c:(.text+0x12a0): undefined reference to `ib_free_cq'
smbdirect.c:(.text+0x12ac): undefined reference to `ib_free_cq'
smbdirect.c:(.text+0x12b8): undefined reference to `ib_dealloc_pd'
smbdirect.c:(.text+0x12c4): undefined reference to `rdma_destroy_id'
fs/cifs/smbdirect.o: In function `_smbd_get_connection':
smbdirect.c:(.text+0x168c): undefined reference to `rdma_create_id'
smbdirect.c:(.text+0x1713): undefined reference to `rdma_resolve_addr'
smbdirect.c:(.text+0x1780): undefined reference to `rdma_resolve_route'
smbdirect.c:(.text+0x17e3): undefined reference to `rdma_destroy_id'
smbdirect.c:(.text+0x183d): undefined reference to `rdma_destroy_id'
smbdirect.c:(.text+0x199d): undefined reference to `ib_alloc_cq'
smbdirect.c:(.text+0x19d9): undefined reference to `ib_alloc_cq'
smbdirect.c:(.text+0x1a89): undefined reference to `rdma_create_qp'
smbdirect.c:(.text+0x1b3c): undefined reference to `rdma_connect'
smbdirect.c:(.text+0x2538): undefined reference to `rdma_destroy_qp'
smbdirect.c:(.text+0x2549): undefined reference to `ib_free_cq'
smbdirect.c:(.text+0x255a): undefined reference to `ib_free_cq'
smbdirect.c:(.text+0x2563): undefined reference to `ib_dealloc_pd'
smbdirect.c:(.text+0x256c): undefined reference to `rdma_destroy_id'
smbdirect.c:(.text+0x25f0): undefined reference to `__ib_alloc_pd'
smbdirect.c:(.text+0x26bb): undefined reference to `rdma_disconnect'
fs/cifs/smbdirect.o: In function `smbd_disconnect_rdma_work':
smbdirect.c:(.text+0x62): undefined reference to `rdma_disconnect'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Steve French <sfrench@samba.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org (moderated for non-subscribers)
Signed-off-by: Steve French <smfrench@gmail.com>
If cifs_zap_mapping() returned an error, we would return without putting
the xid that we got earlier. Restructure cifs_file_strict_mmap() and
cifs_file_mmap() to be more similar to each other and have a single
point of return that always puts the xid.
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
For use-configurable SMB Direct protocol values, export them to /proc/fs/cifs.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
The upper layer calls this function to connect to peer through SMB Direct.
Each SMB Direct connection is based on a RDMA RC Queue Pair.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Add code to implement the core functions to establish a SMB Direct connection.
1. Establish an RDMA connection to SMB server.
2. Negotiate and setup SMB Direct protocol.
3. Implement idle connection timer and credit management.
SMB Direct is enabled by setting CONFIG_CIFS_SMB_DIRECT.
Add to Makefile to enable building SMB Direct.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
To prepare for protocol implementation, add constants and user-configurable
values for the SMB Direct protocol.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Ronnie Sahlberg <lsahlber.redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Add "rdma" to CIFS mount options to connect to SMB Direct.
Add checks to validate this is used on SMB 3.X dialects.
To connect to SMBDirect, use "mount.cifs -o rdma,vers=3.x".
At the time of this patch, 3.x can be 3.0, 3.02 or 3.1.1.
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Ronnie Sahlberg <lsahlber.redhat.com>
Build SMB Direct code when this option is set.
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Ronnie Sahlberg <lsahlber.redhat.com>
This patch is for preparing upper layer for doing SMB read via RDMA write.
When we assemble the SMB read packet header, we need to know the I/O layout
if this request is to use a RDMA write. rdata has all the information we need
for memory registration. Add rdata to smb2_new_read_req.
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Ronnie Sahlberg <lsahlber.redhat.com>
In both functions, use an array of 8 (arbitrary but should be big enough
for all current uses) iov and avoid having to kmalloc the array
for the common case.
If 8 is too small, then fall back to the original behaviour and use
kmalloc/kfree.
This should not change any behaviour but should save us a tiny amount of
cpu cycles.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
This function is similar to SendReceive2 except it does not expect
a 4 byte rfc1002 length header in the first io vector.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
The server shouldn't actually delete the struct nlm_host until it hits
the garbage collector. In order to make that work correctly with the
refcount API, we can bump the refcount by one, and then use
refcount_dec_if_one() in the garbage collector.
Signed-off-by: Trond Myklebust <trondmy@gmail.com>
Acked-by: J. Bruce Fields <bfields@fieldses.org>
In fixing the readdir+pagefault deadlock I accidentally introduced a
stale entry regression in readdir. If we get close to full for the
temporary buffer, and then skip a few delayed deletions, and then try to
add another entry that won't fit, we will emit the entries we found and
retry. Unfortunately we delete entries from our del_list as we find
them, assuming we won't need them. However our pos will be with
whatever our last entry was, which could be before the delayed deletions
we skipped, so the next search will add the deleted entries back into
our readdir buffer. So instead don't delete entries we find in our
del_list so we can make sure we always find our delayed deletions. This
is a slight perf hit for readdir with lots of pending deletions, but
hopefully this isn't a common occurrence. If it is we can revist this
and optimize it.
cc: stable@vger.kernel.org
Fixes: 23b5ec7494 ("btrfs: fix readdir deadlock with pagefault")
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Now that NFS export operations are implemented, enable overlayfs NFS
export support if the "nfs_export" feature is enabled.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
ovl_lookup_real() in lower layer walks back lower parents to find the
topmost indexed parent. If an indexed ancestor is found before reaching
lower layer root, ovl_lookup_real() is called recursively with upper
layer to walk back from indexed upper to the topmost connected/hashed
upper parent (or up to root).
ovl_lookup_real() in upper layer then walks forward to connect the topmost
upper overlay dir dentry and ovl_lookup_real() in lower layer continues to
walk forward to connect the decoded lower overlay dir dentry.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Decoding a dir file handle requires walking backward up to layer root and
for lower dir also checking the index to see if any of the parents have
been copied up.
Lookup overlay ancestor dentry in inode/dentry cache by decoded real
parents to shortcut looking up all the way back to layer root.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Non-indexed upper dirs are encoded as upper file handles. When NFS export
is enabled, hash non-indexed directory inodes by upper inode, so we can
find them in inode cache using the decoded upper inode.
When NFS export is disabled, directories are not indexed on copy up, so
hash non-indexed directory inodes by origin inode, the same hash key
that is used before copy up.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Similar to decoding a pure upper dir file handle, decoding a pure lower
dir file handle is implemented by looking an overlay dentry of the same
path as the pure lower path and verifying that the overlay dentry's
real lower matches the decoded real lower file handle.
Unlike the case of upper dir file handle, the lookup of overlay path by
lower real path can fail or find a mismatched overlay dentry if any of
the lower parents have been copied up and renamed. To address this case
we will need to check if any of the lower parents are indexed.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Decoding an indexed dir file handle is done by looking up the file handle
in index dir by name and then decoding the upper dir from the index origin
file handle. The decoded upper path is used to lookup an overlay dentry of
the same path.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Lookup overlay inode in cache by origin inode, so we can decode a file
handle of an open file even if the index has a whiteout index entry to
mark this overlay inode was unlinked.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Decoding an indexed non-dir file handle is similar to decoding a lower
non-dir file handle, but additionally, we lookup the file handle in index
dir by name to find the real upper inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Decoding a lower non-dir file handle is done by decoding the lower dentry
from underlying lower fs, finding or allocating an overlay inode that is
hashed by the real lower inode and instantiating an overlay dentry with
that inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
For indexed or lower non-dir, encode a non-connectable lower file handle
from origin inode. For indexed or lower dir, when ofs->numlower == 1,
encode a lower file handle from lower dir.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Decoding a merge dir, whose origin's parent is under a redirected
lower dir is not always possible. As a simple aproximation, we do
not encode lower dir file handles when overlay has multiple lower
layers and origin is below the topmost lower layer.
We should later relax this condition and copy up only the parent
that is under a redirected lower.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We only need to encode origin if there is a chance that the same object was
encoded pre copy up and then we need to stay consistent with the same
encoding also after copy up.
In case a non-pure upper is not indexed, then it was copied up before NFS
export support was enabled. In that case, we don't need to worry about
staying consistent with pre copy up encoding and we encode an upper file
handle.
This mitigates the problem that with no index, we cannot find an upper
inode from origin inode, so we cannot decode a non-indexed upper from
origin file handle.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Until this change, we decoded upper file handles by instantiating an
overlay dentry from the real upper dentry. This is sufficient to handle
pure upper files, but insufficient to handle merge/impure dirs.
To that end, if decoded real upper dir is connected and hashed, we
lookup an overlay dentry with the same path as the real upper dir.
If decoded real upper is non-dir, we instantiate a disconnected overlay
dentry as before this change.
Because ovl_fh_to_dentry() returns a connected overlay dir dentry,
exportfs never needs to call get_parent() and get_name() to reconnect an
upper overlay dir. Because connectable non-dir file handles are not
supported, exportfs will not be able to use fh_to_parent() and get_name()
methods to reconnect a disconnected non-dir to its parent. Therefore, the
methods get_parent() and get_name() are implemented just to print out a
sanity warning and the method fh_to_parent() is implemented to warn the
user that using the 'subtree_check' exportfs option is not supported.
An alternative approach could have been to implement instantiating of
an overlay directory inode from origin/index and implement get_parent()
and get_name() by calling into underlying fs operations and them
instantiating the overlay parent dir.
The reasons for not choosing the get_parent() approach were:
- Obtaining a disconnected overlay dir dentry would requires a
delicate re-factoring of ovl_lookup() to get a dentry with overlay
parent info. It was preferred to avoid doing that re-factoring unless
it was proven worthy.
- Going down the path of disconnected dir would mean that the (non
trivial) code path of d_splice_alias() could be traveled and that
meant writing more tests and introduces race cases that are very hard
to hit on purpose. Taking the path of connecting overlay dentry by
forward lookup is therefore the safe and boring way to avoid surprises.
The culprits of the chosen "connected overlay dentry" approach:
- We need to take special care to rename of ancestors while connecting
the overlay dentry by real dentry path. These subtleties are usually
handled by generic exportfs and VFS code.
- In a hypothetical workload, we could end up in a loop trying to connect,
interrupted by rename and restarting connect forever.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Decoding an upper file handle is done by decoding the upper dentry from
underlying upper fs, finding or allocating an overlay inode that is
hashed by the real upper inode and instantiating an overlay dentry with
that inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Encode overlay file handles as struct ovl_fh containing the file handle
encoding of the real upper inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Those helpers are going to be used by overlayfs to implement
NFS export decode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We need to make some room in struct ovl_entry to store information
about redirected ancestors for NFS export, so cram two booleans as
bit flags.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With NFS export, some operations on decoded file handles (e.g. open,
link, setattr, xattr_set) may call copy up with a disconnected non-dir.
In this case, we will copy up lower inode to index dir without
linking it to upper dir.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This is needed for using ovl_get_inode() for decoding file handles
for NFS export.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The helper is needed to lookup an index by file handle for NFS export.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Orphan index entries are non-dir index entries whose union nlink count
dropped to zero. With index=on, orphan index entries are removed on
mount. With NFS export feature enabled, orphan index entries are replaced
with white out index entries to block future open by handle from opening
the lower file.
When dir index has a stale 'upper' xattr, we assume that the upper dir
was removed and we treat the dir index as orphan entry that needs to be
whited out or removed.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With NFS export feature enabled, when overlay inode nlink drops to
zero, instead of removing the index entry, replace it with a whiteout
index entry.
This is needed for NFS export in order to prevent future open by handle
from opening the lower file directly.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When non-dir index union nlink drops to zero the non-dir index
is cleaned. Do the same for directory type index entries when
union directory is removed.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With the NFS export feature enabled, all dirs are indexed on copy up.
Non-dir files are copied up directly to indexdir and then hardlinked
to upper dir.
Directories are copied up to indexdir, then an index entry is created
in indexdir with 'upper' xattr pointing to the copied up dir and then
the copied up dir is moved to upper dir.
Directory index is also used for consistency verification, like
detecting multiple redirected dirs to the same lower dir on lookup.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
With the NFS export feature enabled, all non-dir are indexed on copy up.
The copy up origin inode of an indexed non-dir can be used as a unique
identifier of the overlay object.
The full index is also used for consistency verfication, like detecting
multiple non-hardlink uppers with the same 'origin' on lookup.
Directory index on copy up will be implemented by following patch.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The helper determines which lower file needs to be indexed
on copy up and before nlink changes.
For index=on, the helper evaluates to true for lower hardlinks.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
A previous failed attempt to create or whiteout a directory index may
leave index entries named '#%x' in the index dir. Cleanup those temp
entries on mount instead of failing the mount.
In the future, we may drop 'work' dir and use 'index' dir instead.
This change is enough for cleaning up copy up leftovers 'from the future',
but it is not enough for cleaning up rmdir leftovers 'from the future'
(i.e. temp dir containing whiteouts).
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Directory index entries should have 'upper' xattr pointing to the real
upper dir. Verifying that the upper dir file handle is not stale is
expensive, so only verify stale directory index entries on mount if
NFS export feature is enabled.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Whiteout index entries are used as an indication that an exported
overlay file handle should be treated as stale (i.e. after unlink
of the overlay inode).
Check on mount that whiteout index entries have a name that looks like
a valid file handle and cleanup invalid index entries.
For whiteout index entries, do not check that they also have valid
origin fh and nlink xattr, because those xattr do not exist for a
whiteout index entry.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
A directory index is a directory type entry in index dir with a
"trusted.overlay.upper" xattr containing an encoded ovl_fh of the merge
directory upper dir inode.
On lookup of non-dir files, lower file is followed by origin file handle.
On lookup of dir entries, lower dir is found by name and then compared
to origin file handle. We only trust dir index if we verified that lower
dir matches origin file handle, otherwise index may be inconsistent and
we ignore it.
If we find an indexed non-upper dir or an indexed merged dir, whose
index 'upper' xattr points to a different upper dir, that means that the
lower directory may be also referenced by another upper dir via redirect,
so we fail the lookup on inconsistency error.
To be consistent with directory index entries format, the association of
index dir to upper root dir, that was stored by older kernels in
"trusted.overlay.origin" xattr is now stored in "trusted.overlay.upper"
xattr. This also serves as an indication that overlay was mounted with a
kernel that support index directory entries. For backward compatibility,
if an 'origin' xattr exists on the index dir we also verify it on mount.
Directory index entries are going to be used for NFS export.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On a malformed overlay, several redirected dirs can point to the same
dir on a lower layer. This presents a similar challenge as broken
hardlinks, because different objects in the overlay can return the same
st_ino/st_dev pair from stat(2).
For broken hardlinks, we do not provide constant st_ino on copy up to
avoid this inconsistency. When NFS export feature is enabled, apply
the same logic to files and directories with unverified lower origin.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When the NFS export feature is enabled, overlayfs implicitly enables the
feature "verify_lower". When the "verify_lower" feature is enabled, a
directory inode found in lower layer by name or by redirect_dir is
verified against the file handle of the copy up origin that is stored in
the upper layer.
This introduces a change of behavior for the case of lower layer
modification while overlay is offline. A lower directory created or
moved offline under an exisitng upper directory, will not be merged with
that upper directory.
The NFS export feature should not be used after copying layers, because
the new lower directory inodes would fail verification and won't be
merged with upper directories.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Introduce the "nfs_export" config, module and mount options.
The NFS export feature depends on the "index" feature and enables two
implicit overlayfs features: "index_all" and "verify_lower".
The "index_all" feature creates an index on copy up of every file and
directory. The "verify_lower" feature uses the full index to detect
overlay filesystems inconsistencies on lookup, like redirect from
multiple upper dirs to the same lower dir.
NFS export can be enabled for non-upper mount with no index. However,
because lower layer redirects cannot be verified with the index, enabling
NFS export support on an overlay with no upper layer requires turning off
redirect follow (e.g. "redirect_dir=nofollow").
The full index may incur some overhead on mount time, especially when
verifying that lower directory file handles are not stale.
NFS export support, full index and consistency verification will be
implemented by following patches.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Document that inode index feature solves breaking hard links on
copy up.
Simplify Kconfig backward compatibility disclaimer.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Remove the "origin" language from the functions that handle set, get
and verify of "origin" xattr and pass the xattr name as an argument.
The same helpers are going to be used for NFS export to get, get and
verify the "upper" xattr for directory index entries.
ovl_verify_origin() is now a helper used only to verify non upper
file handle stored in "origin" xattr of upper inode.
The upper root dir file handle is still stored in "origin" xattr on
the index dir for backward compatibility. This is going to be changed
by the patch that adds directory index entries support.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pass the fs instance with lower_layers array instead of the dentry
lowerstack array to ovl_check_origin_fh(), because the dentry members
of lowerstack play no role in this helper.
This change simplifies the argument list of ovl_check_origin(),
ovl_cleanup_index() and ovl_verify_index().
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Re-factor ovl_check_origin() and ovl_get_origin(), so origin fh xattr is
read from upper inode only once during lookup with multiple lower layers
and only once when verifying index entry origin.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Store the fs root layer index inside ovl_layer struct, so we can
get the root fs layer index from merge dir lower layer instead of
find it with ovl_find_layer() helper.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When work dir creation fails, a warning is emitted and overlay is
mounted r/o. Trying to remount r/w will fail with no work dir.
When index dir creation fails, the same warning is emitted and overlay
is mounted r/o, but trying to remount r/w will succeed. This may cause
unintentional corruption of filesystem consistency.
Adjust the behavior of index dir creation failure to that of work dir
creation failure and do not allow to remount r/w. User needs to state
an explicitly intention to work without an index by mounting with
option 'index=off' to allow r/w mount with no index dir.
When mounting with option 'index=on' and no 'upperdir', index is
implicitly disabled, so do not warn about no file handle support.
The issue was introduced with inodes index feature in v4.13, but this
patch will not apply cleanly before ovl_fill_super() re-factoring in
v4.15.
Fixes: 02bcd15774 ("ovl: introduce the inodes index dir feature")
Cc: <stable@vger.kernel.org> #v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Overlayfs falls back to index=off if lower/upper fs does not support
file handles. Do the same if upper fs does not support xattr.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
For a merge dir that was copied up before v4.12 or that was hand crafted
offline (e.g. mkdir {upper/lower}/dir), upper dir does not contain the
'trusted.overlay.origin' xattr. In that case, stat(2) on the merge dir
returns the lower dir st_ino, but getdents(2) returns the upper dir d_ino.
After this change, on merge dir lookup, missing origin xattr on upper
dir will be fixed and 'impure' xattr will be fixed on parent of the legacy
merge dir.
Suggested-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
en_rx_am.c was deleted in 'net-next' but had a bug fixed in it in
'net'.
The esp{4,6}_offload.c conflicts were overlapping changes.
The 'out' label is removed so we just return ERR_PTR(-EINVAL)
directly.
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch just adds the capability for GFS2 to track which function
called gfs2_log_flush. This should make it easier to diagnose
problems based on the sequence of events found in the journals.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch adds a new structure called gfs2_log_header_v2 which is used
to store expanded fields into previously unused areas of the log headers
(i.e., this change is backwards compatible). Some of these are used for
debug purposes so we can backtrack when problems occur. Others are
reserved for future expansion.
This patch is based on a prototype from Steve Whitehouse.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
It isn't needed at all in these files, dynamic debug is the best way to
enable this type of thing, if you really want it. As it is, these
defines were not doing anything at all.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the license "mark" of the sysfs files to be in SPDX form, instead
of the custom text that it currently is in. This is in a quest to get
rid of the 700+ different ways we say "GPLv2" in the kernel tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit bdcf0a423e ("kernel: make groups_sort calling a responsibility
group_info allocators") appears to break nfsd rootsquash in a pretty
major way.
It adds a call to groups_sort() inside the loop that copies/squashes
gids, which means the valid gids are sorted along with the following
garbage. The net result is that the highest numbered valid gids are
replaced with any lower-valued garbage gids, possibly including 0.
We should sort only once, after filling in all the gids.
Fixes: bdcf0a423e ("kernel: make groups_sort calling a responsibility ...")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If fsck.f2fs changes crc, we have no way to recover some inode blocks by roll-
forward recovery. Let's relax the condition to recover them.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
__vfs_removexattr() transfers "NULL" value to the setxattr handler of
the f2fs filesystem in order to remove the extended attribute. But,
__f2fs_setxattr() just ignores the removal request when the value of
the extended attribute is already NULL. We have to remove the extended
attribute itself even if the value of that is already NULL.
We can reporduce this bug with the below:
1. touch file
2. setfattr -n "user.foo" file
3. setfattr -x "user.foo" file
4. getfattr -d file
> user.foo
Signed-off-by: Daeho Jeong <daeho.jeong@samsung.com>
Signed-off-by: Youngjin Gil <youngjin.gil@samsung.com>
Tested-by: Hobin Woo <hobin.woo@samsung.com>
Tested-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Don't remain dirtied page cache in f2fs after shutdown, it can mitigate
memory pressure of whole system, in order to keep other modules working
properly.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Once filesystem shuts down, daemons like gc/discard thread should be
aware of it, and do exit, in addtion, drop all cached pending discard
commands and turn off real-time discard mode.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch makes f2fs_ioc_shutdown handling error case correctly.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Linus Torvalds