Commit Graph

45 Commits

Author SHA1 Message Date
Christoph Hellwig 0b1b213fcf xfs: event tracing support
Convert the old xfs tracing support that could only be used with the
out of tree kdb and xfsidbg patches to use the generic event tracer.

To use it make sure CONFIG_EVENT_TRACING is enabled and then enable
all xfs trace channels by:

   echo 1 > /sys/kernel/debug/tracing/events/xfs/enable

or alternatively enable single events by just doing the same in one
event subdirectory, e.g.

   echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable

or set more complex filters, etc. In Documentation/trace/events.txt
all this is desctribed in more detail.  To reads the events do a

   cat /sys/kernel/debug/tracing/trace

Compared to the last posting this patch converts the tracing mostly to
the one tracepoint per callsite model that other users of the new
tracing facility also employ.  This allows a very fine-grained control
of the tracing, a cleaner output of the traces and also enables the
perf tool to use each tracepoint as a virtual performance counter,
     allowing us to e.g. count how often certain workloads git various
     spots in XFS.  Take a look at

    http://lwn.net/Articles/346470/

for some examples.

Also the btree tracing isn't included at all yet, as it will require
additional core tracing features not in mainline yet, I plan to
deliver it later.

And the really nice thing about this patch is that it actually removes
many lines of code while adding this nice functionality:

 fs/xfs/Makefile                |    8
 fs/xfs/linux-2.6/xfs_acl.c     |    1
 fs/xfs/linux-2.6/xfs_aops.c    |   52 -
 fs/xfs/linux-2.6/xfs_aops.h    |    2
 fs/xfs/linux-2.6/xfs_buf.c     |  117 +--
 fs/xfs/linux-2.6/xfs_buf.h     |   33
 fs/xfs/linux-2.6/xfs_fs_subr.c |    3
 fs/xfs/linux-2.6/xfs_ioctl.c   |    1
 fs/xfs/linux-2.6/xfs_ioctl32.c |    1
 fs/xfs/linux-2.6/xfs_iops.c    |    1
 fs/xfs/linux-2.6/xfs_linux.h   |    1
 fs/xfs/linux-2.6/xfs_lrw.c     |   87 --
 fs/xfs/linux-2.6/xfs_lrw.h     |   45 -
 fs/xfs/linux-2.6/xfs_super.c   |  104 ---
 fs/xfs/linux-2.6/xfs_super.h   |    7
 fs/xfs/linux-2.6/xfs_sync.c    |    1
 fs/xfs/linux-2.6/xfs_trace.c   |   75 ++
 fs/xfs/linux-2.6/xfs_trace.h   | 1369 +++++++++++++++++++++++++++++++++++++++++
 fs/xfs/linux-2.6/xfs_vnode.h   |    4
 fs/xfs/quota/xfs_dquot.c       |  110 ---
 fs/xfs/quota/xfs_dquot.h       |   21
 fs/xfs/quota/xfs_qm.c          |   40 -
 fs/xfs/quota/xfs_qm_syscalls.c |    4
 fs/xfs/support/ktrace.c        |  323 ---------
 fs/xfs/support/ktrace.h        |   85 --
 fs/xfs/xfs.h                   |   16
 fs/xfs/xfs_ag.h                |   14
 fs/xfs/xfs_alloc.c             |  230 +-----
 fs/xfs/xfs_alloc.h             |   27
 fs/xfs/xfs_alloc_btree.c       |    1
 fs/xfs/xfs_attr.c              |  107 ---
 fs/xfs/xfs_attr.h              |   10
 fs/xfs/xfs_attr_leaf.c         |   14
 fs/xfs/xfs_attr_sf.h           |   40 -
 fs/xfs/xfs_bmap.c              |  507 +++------------
 fs/xfs/xfs_bmap.h              |   49 -
 fs/xfs/xfs_bmap_btree.c        |    6
 fs/xfs/xfs_btree.c             |    5
 fs/xfs/xfs_btree_trace.h       |   17
 fs/xfs/xfs_buf_item.c          |   87 --
 fs/xfs/xfs_buf_item.h          |   20
 fs/xfs/xfs_da_btree.c          |    3
 fs/xfs/xfs_da_btree.h          |    7
 fs/xfs/xfs_dfrag.c             |    2
 fs/xfs/xfs_dir2.c              |    8
 fs/xfs/xfs_dir2_block.c        |   20
 fs/xfs/xfs_dir2_leaf.c         |   21
 fs/xfs/xfs_dir2_node.c         |   27
 fs/xfs/xfs_dir2_sf.c           |   26
 fs/xfs/xfs_dir2_trace.c        |  216 ------
 fs/xfs/xfs_dir2_trace.h        |   72 --
 fs/xfs/xfs_filestream.c        |    8
 fs/xfs/xfs_fsops.c             |    2
 fs/xfs/xfs_iget.c              |  111 ---
 fs/xfs/xfs_inode.c             |   67 --
 fs/xfs/xfs_inode.h             |   76 --
 fs/xfs/xfs_inode_item.c        |    5
 fs/xfs/xfs_iomap.c             |   85 --
 fs/xfs/xfs_iomap.h             |    8
 fs/xfs/xfs_log.c               |  181 +----
 fs/xfs/xfs_log_priv.h          |   20
 fs/xfs/xfs_log_recover.c       |    1
 fs/xfs/xfs_mount.c             |    2
 fs/xfs/xfs_quota.h             |    8
 fs/xfs/xfs_rename.c            |    1
 fs/xfs/xfs_rtalloc.c           |    1
 fs/xfs/xfs_rw.c                |    3
 fs/xfs/xfs_trans.h             |   47 +
 fs/xfs/xfs_trans_buf.c         |   62 -
 fs/xfs/xfs_vnodeops.c          |    8
 70 files changed, 2151 insertions(+), 2592 deletions(-)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-14 23:08:16 -06:00
Eric Sandeen d96f8f891f xfs: add more statics & drop some unused functions
A lot more functions could be made static, but they need
forward declarations; this does some easy ones, and also
found a few unused functions in the process.

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
2009-08-31 14:46:20 -05:00
Eric Sandeen e0c222c411 use XFS_CORRUPTION_ERROR in xfs_btree_check_sblock
In Red Hat Bug 512552
 - Can't write to XFS mount during raid5 resync

a user ran into corruption while resyncing a raid, and we failed
a consistency test, but didn't get much more info; it'd be nice
to call XFS_CORRUPTION_ERROR here so we can see the buffer
contents.

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
2009-08-12 01:08:10 -05:00
Malcolm Parsons 9da096fd13 xfs: fix various typos
Signed-off-by: Malcolm Parsons <malcolm.parsons@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2009-03-29 09:55:42 +02:00
Dave Chinner 33ad965dde Long btree pointers are still 64 bit on disk
[XFS] Long btree pointers are still 64 bit on disk

On 32 bit machines with CONFIG_LBD=n, XFS reduces the
in memory size of xfs_fsblock_t to 32 bits so that it
will fit within 32 bit addressing. However, the disk format
for long btree pointers are still 64 bits in size.

The recent btree rewrite failed to take this into account
when initialising new btree blocks, setting sibling pointers
to NULL and checking if they are NULL. Hence checking whether
a 64 bit NULL was the same as a 32 bit NULL was failingi
resulting in NULL sibling pointers failing to be detected
correctly. This showed up as WANT_CORRUPTED_GOTO shutdowns
in xfs_btree_delrec.

Fix this by making all the comparisons and setting of long
pointer btree NULL blocks to the disk format, not the
in memory format. i.e. use NULLDFSBNO.

Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Reported-by: Jacek Luczak <difrost.kernel@gmail.com>
Reported-by: Danny ter Haar <dth@dth.net>
Tested-by: Jacek Luczak <difrost.kernel@gmail.com>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
2009-01-21 18:33:46 -06:00
Eric Sandeen 9d87c3192d [XFS] Remove the rest of the macro-to-function indirections.
Remove the last of the macros-defined-to-static-functions.

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2009-01-16 17:10:42 +11:00
Christoph Hellwig e6edbd1c1c [XFS] fix compile of xfs_btree_readahead_lblock on m68k
Change the left/right variables to the proper always 64bit xfs_dfsbo_t
type because otherwise compilation fails for Geert on m68k without
CONFIG_LBD:

| fs/xfs/xfs_btree.c: In function 'xfs_btree_readahead_lblock':
| fs/xfs/xfs_btree.c:736: warning: comparison is always true due to limited range of data type
| fs/xfs/xfs_btree.c:741: warning: comparison is always true due to limited range of data type

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2009-01-09 16:16:51 +11:00
Christoph Hellwig 7cc95a821d [XFS] Always use struct xfs_btree_block instead of short / longform
structures.

Always use the generic xfs_btree_block type instead of the short / long
structures. Add XFS_BTREE_SBLOCK_LEN / XFS_BTREE_LBLOCK_LEN defines for
the length of a short / long form block. The rationale for this is that we
will grow more btree block header variants to support CRCs and other RAS
information, and always accessing them through the same datatype with
unions for the short / long form pointers makes implementing this much
easier.

SGI-PV: 988146

SGI-Modid: xfs-linux-melb:xfs-kern:32300a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-10-30 17:14:34 +11:00
Lachlan McIlroy 24ee0e49c9 [XFS] Make xfs_btree_check_ptr() debug-only code.
SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32224a

Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
2008-10-30 17:05:26 +11:00
Christoph Hellwig 3cc7524c84 [XFS] mark various functions in xfs_btree.c static
Lots of functionality in xfs_btree.c isn't needed by callers outside of
this file anymore, so mark these functions static.

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32209a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30 16:58:41 +11:00
Christoph Hellwig 4a26e66e77 [XFS] add keys_inorder and recs_inorder btree methods
Add methods to check whether two keys/records are in the righ order. This
replaces the xfs_btree_check_key and xfs_btree_check_rec methods. For the
callers from xfs_bmap.c just opencode the bmbt-specific asserts.

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32208a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30 16:58:32 +11:00
Christoph Hellwig fd6bcc5b63 [XFS] kill xfs_bmbt_log_block and xfs_bmbt_log_recs
These are equivalent to the xfs_btree_* versions, and the only remaining
caller can be switched to the generic one after they are exported. Also
remove some now dead infrastructure in xfs_bmap_btree.c.

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32207a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30 16:58:21 +11:00
Christoph Hellwig 8cc938fe42 [XFS] implement generic xfs_btree_get_rec
Not really much reason to make it generic given that it's so small, but
this is the last non-method in xfs_alloc_btree.c and xfs_ialloc_btree.c,
so it makes the whole btree implementation more structured.

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32206a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30 16:58:11 +11:00
Christoph Hellwig 91cca5df9b [XFS] implement generic xfs_btree_delete/delrec
Make the btree delete code generic. Based on a patch from David Chinner
with lots of changes to follow the original btree implementations more
closely. While this loses some of the generic helper routines for
inserting/moving/removing records it also solves some of the one off bugs
in the original code and makes it easier to verify.

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32205a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30 16:58:01 +11:00
Christoph Hellwig d4b3a4b7dd [XFS] move xfs_bmbt_killroot to common code
xfs_bmbt_killroot is a mostly generic implementation of moving from a real
block based root to an inode based root. So move it to xfs_btree.c where
it can use all the nice infrastructure there and make it pointer size
agnostic

The new name for it is xfs_btree_kill_iroot, following the old naming but
making it clear we're dealing with the root in inode case here, and to
avoid confusion with xfs_btree_new_root which is used for the not inode
rooted case. I've also added a comment describing what it does and why
it's named the way it is.

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32203a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30 16:57:51 +11:00
Christoph Hellwig 4b22a57188 [XFS] implement generic xfs_btree_insert/insrec
Make the btree insert code generic. Based on a patch from David Chinner
with lots of changes to follow the original btree implementations more
closely. While this loses some of the generic helper routines for
inserting/moving/removing records it also solves some of the one off bugs
in the original code and makes it easier to verify.

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32202a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30 16:57:40 +11:00
Christoph Hellwig ea77b0a66e [XFS] move xfs_bmbt_newroot to common code
xfs_bmbt_newroot is a mostly generic implementation of moving from an
inode root to a real block based root. So move it to xfs_btree.c where it
can use all the nice infrastructure there and make it pointer size
agnostic

The new name for it is xfs_btree_new_iroot, following the old naming but
making it clear we're dealing with the root in inode case here, and to
avoid confusion with xfs_btree_new_root which is used for the not inode
rooted case.

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32201a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30 16:57:28 +11:00
Christoph Hellwig 344207ce84 [XFS] implement semi-generic xfs_btree_new_root
From: Dave Chinner <dgc@sgi.com>

Add a xfs_btree_new_root helper for the alloc and ialloc btrees. The bmap
btree needs it's own version and is not converted.

[hch: split out from bigger patch and minor adaptions]

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32200a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30 16:57:16 +11:00
Christoph Hellwig f5eb8e7ca5 [XFS] implement generic xfs_btree_split
Make the btree split code generic. Based on a patch from David Chinner
with lots of changes to follow the original btree implementations more
closely. While this loses some of the generic helper routines for
inserting/moving/removing records it also solves some of the one off bugs
in the original code and makes it easier to verify.

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32198a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30 16:57:03 +11:00
Christoph Hellwig 687b890a18 [XFS] implement generic xfs_btree_lshift
Make the btree left shift code generic. Based on a patch from David
Chinner with lots of changes to follow the original btree implementations
more closely. While this loses some of the generic helper routines for
inserting/moving/removing records it also solves some of the one off bugs
in the original code and makes it easier to verify.

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32197a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30 16:56:53 +11:00
Christoph Hellwig 9eaead51be [XFS] implement generic xfs_btree_rshift
Make the btree right shift code generic. Based on a patch from David
Chinner with lots of changes to follow the original btree implementations
more closely. While this loses some of the generic helper routines for
inserting/moving/removing records it also solves some of the one off bugs
in the original code and makes it easier to verify.

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32196a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30 16:56:43 +11:00
Christoph Hellwig 278d0ca14e [XFS] implement generic xfs_btree_update
From: Dave Chinner <dgc@sgi.com>

The most complicated part here is the lastrec tracking for the alloc
btree. Most logic is in the update_lastrec method which has to do some
hopefully good enough dirty magic to maintain it.

[hch: split out from bigger patch and a rework of the lastrec

logic]

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32194a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30 16:56:32 +11:00
Christoph Hellwig 38bb74237d [XFS] implement generic xfs_btree_updkey
From: Dave Chinner <dgc@sgi.com>

Note that there are many > 80 char lines introduced due to the
xfs_btree_key casts. But the places where this happens is throw-away code
once the whole btree code gets merged into a common implementation.

The same is true for the temporary xfs_alloc_log_keys define to the new
name. All old users will be gone after a few patches.

[hch: split out from bigger patch and minor adaptions]

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32193a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30 16:56:22 +11:00
Christoph Hellwig fe033cc848 [XFS] implement generic xfs_btree_lookup
From: Dave Chinner <dgc@sgi.com>

[hch: split out from bigger patch and minor adaptions]

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32192a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30 16:56:09 +11:00
Christoph Hellwig 8df4da4a0a [XFS] implement generic xfs_btree_decrement
From: Dave Chinner <dgc@sgi.com>

[hch: split out from bigger patch and minor adaptions]

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32191a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30 16:55:58 +11:00
Christoph Hellwig 637aa50f46 [XFS] implement generic xfs_btree_increment
From: Dave Chinner <dgc@sgi.com>

Because this is the first major generic btree routine this patch includes
some infrastrucure, first a few routines to deal with a btree block that
can be either in short or long form, second xfs_btree_read_buf_block,
which is the new central routine to read a btree block given a cursor, and
third the new xfs_btree_ptr_addr routine to calculate the address for a
given btree pointer record.

[hch: split out from bigger patch and minor adaptions]

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32190a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30 16:55:45 +11:00
Christoph Hellwig 65f1eaeac0 [XFS] add helpers for addressing entities inside a btree block
Add new helpers in xfs_btree.c to find the record, key and block pointer
entries inside a btree block. To implement this genericly the
->get_maxrecs methods and two new xfs_btree_ops entries for the key and
record sizes are used. Also add a big comment describing how the
addressing inside a btree block works.

Note that these helpers are unused until users are introduced in the next
patches and this patch will thus cause some harmless compiler warnings.

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32189a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30 16:55:34 +11:00
Christoph Hellwig ce5e42db42 [XFS] add get_maxrecs btree operation
Factor xfs_btree_maxrecs into a per-btree operation.

The get_maxrecs method is based on a patch from Dave Chinner.

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32188a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30 16:55:23 +11:00
Christoph Hellwig a23f6ef8ce [XFS] refactor btree validation helpers
Move the various btree validation helpers around in xfs_btree.c so that
they are close to each other and in common #ifdef DEBUG sections.

Also add a new xfs_btree_check_ptr helper to check a btree ptr that can be
either long or short form.

Split out from a bigger patch from Dave Chinner with various small changes
applied by me.

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32183a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30 16:54:53 +11:00
Christoph Hellwig b524bfeee2 [XFS] refactor xfs_btree_readahead
From: Dave Chinner <dgc@sgi.com>

Refactor xfs_btree_readahead to make it more readable:

(a) remove the inline xfs_btree_readahead wrapper and move all checks out

of line into the main routine.

(b) factor out helpers for short/long form btrees

(c) move check for root in inodes from the callers into
xfs_btree_readahead

[hch: split out from a big patch and minor cleanups]

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32182a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30 16:54:43 +11:00
Christoph Hellwig e99ab90d6a [XFS] add a long pointers flag to xfs_btree_cur
Add a flag to the xfs btree cursor when using long (64bit) block pointers
instead of checking btnum == XFS_BTNUM_BMAP.

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32181a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30 16:54:33 +11:00
Christoph Hellwig 8186e517fa [XFS] make btree root in inode support generic
The bmap btree is rooted in the inode and not in a disk block. Make the
support for this feature more generic by adding a btree flag to for this
feature instead of relying on the XFS_BTNUM_BMAP btnum check.

Also clean up xfs_btree_get_block where this new flag is used.

Based upon a patch from Dave Chinner.

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32180a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30 16:54:22 +11:00
Christoph Hellwig 561f7d1739 [XFS] split up xfs_btree_init_cursor
xfs_btree_init_cursor contains close to little shared code for the
different btrees and will get even more non-common code in the future.
Split it up into one routine per btree type.

Because xfs_btree_dup_cursor needs to call the init routine for a generic
btree cursor add a new btree operation vector that contains a dup_cursor
method that initializes a new cursor based on an existing one.

The btree operations vector is based on an idea and code from Dave Chinner
and will grow more entries later during this series.

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32176a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30 16:53:59 +11:00
Christoph Hellwig f2277f06e6 [XFS] kill struct xfs_btree_hdr
This type is only embedded in struct xfs_btree_block and never used
directly. By moving the fields directly into struct xfs_btree_block a lot
of the macros for struct xfs_btree_sblock and struct xfs_btree_lblock can
be used for struct xfs_btree_block too now which helps greatly with some
of the migrations during implementing the generic btree code.

SGI-PV: 985583

SGI-Modid: xfs-linux-melb:xfs-kern:32174a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
2008-10-30 16:53:47 +11:00
Christoph Hellwig 169d6227a7 [XFS] Use the same btree_cur union member for alloc and inobt trees.
The alloc and inobt btree use the same agbp/agno pair in the btree_cur
union. Make them use the same bc_private.a union member so that code for
these two short form btree implementations can be shared.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31788a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 16:25:27 +10:00
Christoph Hellwig cdcf43335c [XFS] small cleanups in xfs_btree.c
Remove unneeded xfs_btree_get_block forward declaration. Move
xfs_btree_firstrec next to xfs_btree_lastrec.

SGI-PV: 981498

SGI-Modid: xfs-linux-melb:xfs-kern:31787a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 16:23:50 +10:00
Christoph Hellwig 8801bb99e4 [XFS] endianess annotations for xfs_bmbt_key Trivial as there are no
incore users.

SGI-PV: 954580
SGI-Modid: xfs-linux-melb:xfs-kern:26561a

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2006-09-28 10:58:17 +10:00
Christoph Hellwig 61a2584867 [XFS] endianess annotations for xfs_inobt_rec_t / xfs_inobt_key_t
SGI-PV: 954580
SGI-Modid: xfs-linux-melb:xfs-kern:26556a

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2006-09-28 10:57:04 +10:00
Nathan Scott f6c2d1fa63 [XFS] Remove version 1 directory code. Never functioned on Linux, just
pure bloat.

SGI-PV: 952969
SGI-Modid: xfs-linux-melb:xfs-kern:26251a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-20 13:04:51 +10:00
Christoph Hellwig 16259e7d95 [XFS] Endianess annotations for various allocator data structures
SGI-PV: 943272
SGI-Modid: xfs-linux:xfs-kern:201006a

Signed-off-by: Christoph Hellwig <hch@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 15:11:25 +11:00
Nathan Scott 7b71876980 [XFS] Update license/copyright notices to match the prefered SGI
boilerplate.

SGI-PV: 913862
SGI-Modid: xfs-linux:xfs-kern:23903a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 14:58:39 +11:00
Nathan Scott a844f4510d [XFS] Remove xfs_macros.c, xfs_macros.h, rework headers a whole lot.
SGI-PV: 943122
SGI-Modid: xfs-linux:xfs-kern:23901a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 14:38:42 +11:00
Eric Sandeen 6add2c4288 [XFS] Fix up some warning fallout from functions made static
SGI-PV: 936255
SGI-Modid: xfs-linux:xfs-kern:193691a

Signed-off-by: Eric Sandeen <sandeen@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-06-21 15:39:44 +10:00
Christoph Hellwig ba0f32d460 [XFS] mark various symbols static Patch from Adrian Bunk
SGI-PV: 936255
SGI-Modid: xfs-linux:xfs-kern:192760a

Signed-off-by: Christoph Hellwig <hch@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-06-21 15:36:52 +10:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00