It's a follow up patch for a previous patch "perf tool: Return all
events as auto-completions after comma".
With this patch, auto-completion can work well for events with a ':'.
For example:
root@skl:/tmp# perf stat -e block:block_<TAB>
block:block_bio_backmerge block:block_rq_complete
block:block_bio_bounce block:block_rq_insert
block:block_bio_complete block:block_rq_issue
block:block_bio_frontmerge block:block_rq_remap
block:block_bio_queue block:block_rq_requeue
block:block_bio_remap block:block_sleeprq
block:block_dirty_buffer block:block_split
block:block_getrq block:block_touch_buffer
block:block_plug block:block_unplug
root@skl:/tmp# perf stat -e block:block_rq_<TAB>
block:block_rq_complete block:block_rq_issue block:block_rq_requeue
block:block_rq_insert block:block_rq_remap
root@skl:/tmp# perf stat -e block:block_rq_complete<TAB>
block:block_rq_complete
root@skl:/tmp# perf stat -e block:block_rq_complete
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1513973758-19109-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's a follow up for one previous patch "perf tool: Improve bash command
line auto-complete for multiple events with comma."
It fixes an issue that no events are displayed when <TAB> is directly
typed after comma.
With this patch, now the result is:
root@skl:/tmp# perf stat -e cpu-cycles,<TAB>
Display all 2389 possibilities? (y or n)
alarmtimer:alarmtimer_cancel
alarmtimer:alarmtimer_fired
alarmtimer:alarmtimer_start
alarmtimer:alarmtimer_suspend
alignment-faults
arith.divider_active
BAClear_Cost
baclears.any
block:block_bio_backmerge
block:block_bio_bounce
block:block_bio_complete
block:block_bio_frontmerge
block:block_bio_queue
block:block_bio_remap
block:block_dirty_buffer
block:block_getrq
block:block_plug
block:block_rq_complete
block:block_rq_insert
block:block_rq_issue
block:block_rq_remap
block:block_rq_requeue
block:block_sleeprq
--More--
One remaining issue is that the auto-completions doesn't work well
for the event with ':'. For example, clk:clk_enable.
Because ':' is set as WORDBREAK by default in bash. Need more work
for this case.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1513940255-16528-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf has perf-completion.sh to define command line auto-completion in
bash/zsh.
For record/stat -e it works for single events, but isn't working when
specifying multiple events with comma.
It would be very useful if it could be fixed to make it easier by
supporting multiple events, comma separated.
With this patch, the result can be like this:
1. Support the events returned from 'perf list --raw-dump'
root@skl:/tmp# perf stat -e cpu/cache<TAB>
cpu/cache-misses/ cpu/cache-references/
root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/branch-<TAB>
cpu/branch-instructions/ cpu/branch-misses/
root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/branch-i<TAB>
root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/branch-instructions/
2. Support the events listed in /sys/bus/event_source/devices/cpu/events
root@skl:/tmp# perf stat -e cycle<TAB>
cycle_activity.cycles_l1d_miss cycle_activity.stalls_l3_miss
cycle_activity.cycles_l2_miss cycle_activity.stalls_mem_any
cycle_activity.cycles_l3_miss cycle_activity.stalls_total
cycle_activity.cycles_mem_any cycles-ct
cycle_activity.stalls_l1d_miss cycles-t
cycle_activity.stalls_l2_miss
root@skl:/tmp# perf stat -e cycles-<TAB>
cycles-ct cycles-t
root@skl:/tmp# perf stat -e cycles-t,cpu/c<TAB>
cpu/cache-misses/ cpu/cpu-cycles/ cpu/cycles-t/
cpu/cache-references/ cpu/cycles-ct/
root@skl:/tmp# perf stat -e cycles-t,cpu/cache-<TAB>
cpu/cache-misses/ cpu/cache-references/
root@skl:/tmp# perf stat -e cycles-t,cpu/cache-misses/
3. Support the uppercase event which is with prefix "cpu/"
root@skl:/tmp# perf stat -e cpu/c<TAB>
cpu/cache-misses/ cpu/cpu-cycles/ cpu/cycles-t/
cpu/cache-references/ cpu/cycles-ct/
root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/C<TAB>
cpu/CACHE-MISSES/ cpu/CPU-CYCLES/ cpu/CYCLES-T/
cpu/CACHE-REFERENCES/ cpu/CYCLES-CT/
root@skl:/tmp# perf stat -e cpu/cache-misses/,cpu/CACHE-REFERENCES/
Note that:
a) This patch only supports bash.
b) It doesn't support the cases like {},{} or {...,...}.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1513848370-8098-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since some functions (e.g. '_get_comp_words_by_ref()') in perf bash
completion script are originally taken from git bash completion script,
these functions may be preloaded before perf bash completion script
runs.
In order to avoid repeating loading the same function twice, some test
constraints are used before these function definitions in the perf bash
completion script (e.g. 'type _get_comp_words_by_ref &>/dev/null ||').
The problem is that, if these functions in perf bash completion script
are changed for some reason, perf will still use the preloaded bash
functions rather than the customized functions of its own.
As a result, the perf bash completion will behave incorrectly. To get
rid of this problem, a flag can be defined to determine the proper
situation.
And to avoid overwriting the preloaded functions, the names of these
functions in perf bash completion script should be renamed to the
perf-customized ones.
Example:
Before this patch:
$ type _get_comp_words_by_ref
_get_comp_words_by_ref is a function
_get_comp_words_by_ref ()
{
local exclude flag i OPTIND=1;
local cur cword words=();
local upargs=() upvars=() vcur vcword vprev vwords;
while getopts "c:i:n:p:w:" flag "$@"; do
case $flag in
c)
vcur=$OPTARG
;;
i)
vcword=$OPTARG
;;
n)
exclude=$OPTARG
;;
p)
vprev=$OPTARG
;;
w)
vwords=$OPTARG
;;
esac;
done;
while [[ $# -ge $OPTIND ]]; do
case ${!OPTIND} in
cur)
vcur=cur
;;
prev)
vprev=prev
;;
cword)
vcword=cword
;;
words)
vwords=words
;;
*)
echo "bash: $FUNCNAME(): \`${!OPTIND}': unknown argument" 1>&2;
return 1
;;
esac;
let "OPTIND += 1";
done;
__get_cword_at_cursor_by_ref "$exclude" words cword cur;
[[ -n $vcur ]] && {
upvars+=("$vcur");
upargs+=(-v $vcur "$cur")
};
[[ -n $vcword ]] && {
upvars+=("$vcword");
upargs+=(-v $vcword "$cword")
};
[[ -n $vprev && $cword -ge 1 ]] && {
upvars+=("$vprev");
upargs+=(-v $vprev "${words[cword - 1]}")
};
[[ -n $vwords ]] && {
upvars+=("$vwords");
upargs+=(-a${#words[@]} $vwords "${words[@]}")
};
(( ${#upvars[@]} )) && local "${upvars[@]}" && _upvars "${upargs[@]}"
}
As shown above, the _get_comp_words_by_ref is the preloaded function in
fact, rather than the function defined in perf-completion.sh. So if we
happen to change the function for some reason, the result will behave in
a wrong state.
After this patch:
We can set preload_get_comp_words_by_ref="false" to not use the preloaded
function. Instead, it will use the function defined in perf-completion.sh,
which is renamed as __perf_get_comp_words_by_ref to avoid overwriting
the preloaded function _get_comp_words_by_ref.
$ type __perf_get_comp_words_by_ref
__perf_get_comp_words_by_ref is a function
__perf_get_comp_words_by_ref ()
{
local exclude cur_ words_ cword_;
if [ "$1" = "-n" ]; then
exclude=$2;
shift 2;
fi;
__my_reassemble_comp_words_by_ref "$exclude";
cur_=${words_[cword_]};
while [ $# -gt 0 ]; do
case "$1" in
cur)
cur=$cur_
;;
prev)
prev=${words_[$cword_-1]}
;;
words)
words=("${words_[@]}")
;;
cword)
cword=$cword_
;;
esac;
shift;
done
}
As shown above, the function __perf_get_comp_words_by_ref is loaded and
can work this time.
Note that we do not change the original behavior when those functions are
not preloaded before perf bash completion script runs. In this case,
although the flag is set to "true", the code will still change it to
"false" to use the function defined in perf-completion.sh.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-14-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bash completion does not support listing subsubcommands for 'perf
trace <TAB>', so fix it.
Example:
Before this patch:
$ perf trace <TAB>
$
As shown above, the subsubcommands of perf trace does not come out.
After this patch:
$ perf trace <TAB>
record
As shown above, the subsubcommands of perf trace can come out now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-13-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bash completion does not support listing subsubcommands for 'perf
timechart <TAB>', so fix it.
Example:
Before this patch:
$ perf timechart <TAB>
$
As shown above, the subsubcommands of perf timechart does not come out.
After this patch:
$ perf timechart <TAB>
record
As shown above, the subsubcommands of perf timechart can come out now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-12-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bash completion does not support listing subsubcommands for 'perf
test <TAB>', so fix it.
Example:
Before this patch:
$ perf test <TAB>
$
As shown above, the subsubcommands of perf test does not come out.
After this patch:
$ perf test <TAB>
list
As shown above, the subsubcommands of perf test can come out now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-11-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bash completion does not support listing subsubcommands for 'perf
script <TAB>', so fix it.
Example:
Before this patch:
$ perf script <TAB>
$
As shown above, the subsubcommands of perf script does not come out.
After this patch:
$ perf script <TAB>
record report
As shown above, the subsubcommands of perf script can come out now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-10-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bash completion does not support listing subsubcommands for 'perf
help <TAB>', so fix it.
Example:
Before this patch:
$ perf help <TAB>
$
As shown above, the subsubcommands of perf help does not come out.
After this patch:
$ perf help <TAB>
annotate buildid-cache data evlist inject
kvm lock probe report script
test top
bench buildid-list diff help kmem
list mem record sched stat
timechart trace
As shown above, the subsubcommands of perf help can come out now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-9-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bash completion does not support listing subsubcommands for 'perf
data <TAB>', so fix it.
Example:
Before this patch:
$ perf data <TAB>
$
As shown above, the subsubcommands of perf data does not come out.
After this patch:
$ perf data <TAB>
convert
As shown above, the subsubcommands of perf data can come out now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-8-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bash completion does not support listing subcommands for 'perf
--<long option> <TAB>'.
Example:
Before this patch:
$ perf --debug <TAB>
$
As shown above, the subcommands of perf does not come out.
After this patch:
$ perf --debug <TAB>
annotate buildid-cache data evlist inject
kvm lock probe report script
test top version
bench buildid-list diff help kmem
list mem record sched stat
timechart trace
As shown above, the subcommands of perf can come out now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-7-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bash completion only supports -e rather than --event, so fix it.
Example:
Before this patch:
$ perf record --event <TAB>
$
As shown above, the events of record does not come out.
After this patch:
$ perf record --event <TAB>
lignment-faults cpu/instructions/
L1-dcache-prefetch-misses node-prefetches
uncore_rbox_0/qpi0_idle_filt/
branch-instructions cpu/mem-loads/
L1-dcache-store-misses node-prefetch-misses
uncore_rbox_0/qpi1_date_response/
branch-load-misses cpu-migrations
L1-dcache-stores node-store-misses
uncore_rbox_0/qpi1_filt_send/
branch-loads dTLB-load-misses
L1-icache-load-misses node-stores
uncore_rbox_0/qpi1_idle_filt/
...
As shown above, the events of record can come out now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-6-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bash completion does not support listing events for 'perf kvm|kmem|
mem|lock|sched record|stat|top -e <TAB>', where 'kvm|kmem|mem|lock|sched'
are all subcommands of perf.
Example:
Before this patch:
$ perf kvm record -e <TAB>
$
As shown above, the events of record does not come out.
After this patch:
$ perf kvm record -e <TAB>
alignment-faults cpu/instructions/
L1-dcache-prefetch-misses node-prefetches
uncore_rbox_0/qpi0_idle_filt/
branch-instructions cpu/mem-loads/
L1-dcache-store-misses node-prefetch-misses
uncore_rbox_0/qpi1_date_response/
branch-load-misses cpu-migrations
L1-dcache-stores node-store-misses
uncore_rbox_0/qpi1_filt_send/
branch-loads dTLB-load-misses
L1-icache-load-misses node-stores
uncore_rbox_0/qpi1_idle_filt/
...
As shown above, the events of record can come out now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-5-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bash completion gives wrong options for 'perf kvm|kmem|mem|lock|
sched subsubcommand --<TAB>', where 'kvm|kmem|mem|lock|sched' are all
subcommands of perf and 'subsubcommand' is a subcommand of 'kvm|kmem|mem
|lock|sched'. In fact, the result incorrectly lists the bash completion
of 'perf subcommand' rather than 'perf subcommand subsubcommand'.
Example:
Before this patch:
$ perf kvm record --<TAB>
--guest --guestkallsyms --guestmodules --guestmount
--guestvmlinux --host --input --output
--verbose
As shown above, the result is the options of kvm rather than record.
After this patch:
$ perf kvm record --<TAB>
--all-cpus --cgroup --delay --group
--no-buildid --output --quiet --stat
--uid
--branch-any --count --event --intr-regs
--no-buildid-cache --period --raw-samples --tid
--verbose
--branch-filter --cpu --filter --mmap-pages
--no-inherit --per-thread --realtime --timestamp
--weight
--call-graph --data --freq
--no-buffering --no-samples --pid
--running-time --transaction
As shown above, the result is exactly the options of record as we wished.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-4-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bash completion does not support listing subsubcommands for 'perf
kvm|kmem|mem|lock|sched --<long option> <TAB>', where 'kvm|kmem|mem|
lock|sched' are all subcommands of perf.
Example:
Before this patch:
$ perf kvm --verbose <TAB>
$
As shown above, the subsubcommands of perf kvm does not come out.
After this patch:
$ perf kvm --verbose <TAB>
buildid-list diff record report stat
top
As shown above, the subsubcommands of perf kvm can come out now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-3-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The bash completion does not support listing options for 'perf
kvm|kmem|mem|lock|sched --<TAB>', where 'kvm|kmem|mem|lock|sched' are
all subcommands of perf.
Example:
Before this patch:
$ perf kvm --<TAB>
$
As shown above, the options of perf kvm does not come out.
After this patch:
$ perf kvm --<TAB>
--alloc --caller --input --line --raw-ip --sort
--verbose
As shown above, the options of perf kvm can come out now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1426685758-25488-2-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf-completion.sh uses a predefined string '--help --version
--exec-path --html-path --paginate --no-pager --perf-dir --work-tree
--debugfs-dir' for the bash completion of 'perf --*', which has two
problems:
Problem 1: If the options of perf are changed (see handle_options() in
perf.c), the perf-completion.sh has to be changed at the same time. If
not, the bash completion of 'perf --*' and the options which perf
really supports will be inconsistent.
Problem 2: When typing another single character after 'perf --', e.g.
'h', and hit TAB key to get the bash completion of 'perf --h', the
character 'h' disappears at once. This is not what we want, we wish the
bash completion can return '--help --html-path' and then we can
continue to choose one.
To solve this problem, we add '--list-opts' to perf, which now supports
'perf --list-opts' directly, and its result can be used in bash
completion now.
Example:
Before this patch:
$ perf --h <-- hit TAB key after character 'h'
$ perf -- <-- 'h' disappears and no required result
After this patch:
$ perf --h <-- hit TAB key after character 'h'
--help --html-path <-- the required result
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1425032491-20224-8-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce
$ perf kvm --list-cmds
to dump a raw list of commands for use by the completion script. In
order to do this, introduce parse_options_subcommand() for handling
subcommands as a special case in the parse-options machinery.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1393896396-10427-1-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao