Commit Graph

2022 Commits

Author SHA1 Message Date
Johan Rudholm 4d6144de8b mmc: core: check for zero length ioctl data
If the read or write buffer size associated with the command sent
through the mmc_blk_ioctl is zero, do not prepare data buffer.

This enables a ioctl(2) call to for instance send a MMC_SWITCH to set
a byte in the ext_csd.

Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11 23:58:42 -05:00
Tony Lin 4ee5ebaf74 mmc: sdhci-esdhc: Change delay after setting clock from 100ms to 1ms
1ms is enough for hardware to change the clock to stable.
100ms is too long in the tasklet.

Signed-off-by: Tony Lin <tony.lin@freescale.com>
CC: Xiaobo Xie <X.Xie@freescale.com>
CC: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11 23:58:41 -05:00
Per Forlin 739c69c964 mmc: mmc_test: align max_seg_size
If max_seg_size is unaligned, mmc_test_map_sg() may create sg element
sizes that are not aligned with 512 byte. Fix, align max_seg_size at
mmc_test_area_init().

Signed-off-by: Per Forlin <per.forlin@stericsson.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11 23:58:41 -05:00
Per Forlin 5a09262744 mmc: mmci: add capabilities2 for MMC_CAP2
Signed-off-by: Per Forlin <per.forlin@stericsson.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11 23:58:41 -05:00
Philip Rakity a303c5319c mmc: sdio: support SDIO UHS cards
This patch adds support for sdio UHS cards per the version 3.0
spec.

UHS mode is only enabled for version 3.0 cards when both the
host and the controller support UHS modes.

1.8v signaling support is removed if both the card and the
host do not support UHS.  This is done to maintain
compatibility and some system/card combinations break when
1.8v signaling is enabled when the host does not support UHS.

Signed-off-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Aaron Lu <Aaron.lu@amd.com>
Reviewed-by: Arindam Nath <arindam.nath@amd.com>
Tested-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11 23:58:41 -05:00
Viresh Kumar b70a7fab26 mmc: sdhci-spear: Implement suspend/resume
Suspend/Resume is missing from sdhci-spear driver. This patch adds
support for suspend/resume for this driver.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11 23:58:41 -05:00
Sujit Reddy Thumma 597dd9d79c mmc: core: Use delayed work in clock gating framework
Current clock gating framework disables the MCI clock as soon as the
request is completed and enables it when a request arrives. This aggressive
clock gating framework, when enabled, cause following issues:

When there are back-to-back requests from the Queue layer, we unnecessarily
end up disabling and enabling the clocks between these requests since 8MCLK
clock cycles is a very short duration compared to the time delay between
back to back requests reaching the MMC layer. This overhead can effect the
overall performance depending on how long the clock enable and disable
calls take which is platform dependent. For example on some platforms we
can have clock control not on the local processor, but on a different
subsystem and the time taken to perform the clock enable/disable can add
significant overhead.

Also if the host controller driver decides to disable the host clock too
when mmc_set_ios function is called with ios.clock=0, it adds additional
delay and it is highly possible that the next request had already arrived
and unnecessarily blocked in enabling the clocks. This is seen frequently
when the processor is executing at high speeds and in multi-core platforms
thus reduces the overall throughput compared to if clock gating is
disabled.

Fix this by delaying turning off the clocks by posting request on
delayed workqueue. Also cancel the unscheduled pending work, if any,
when there is access to card.

sysfs entry is provided to tune the delay as needed, default
value set to 200ms.

Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11 23:58:41 -05:00
Chris Ball c59d44739a mmc: card: Use manufacturer ID symbols in card quirks.
No functional change; adds macros for card manufacturer IDs.

Signed-off-by: Chris Ball <cjb@laptop.org>
Cc: Andrei E. Warkentin <andrey.warkentin@gmail.com>
Cc: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com>
2012-01-11 23:58:40 -05:00
Giuseppe CAVALLARO df16219f36 mmc: debugfs: expose the SDCLK frq in sys ios
This patch is to expose the actual SDCLK frequency in
/sys/kernel/debug/mmcX/ios entry.

For example, if the max clk for a normal speed card is 20MHz this
is reported in /sys/kernel/debug/mmcX/ios.  Unfortunately the actual
SDCLK frequency (i.e. Baseclock / divisor) is not reported at all:
for example, in that case, on Arasan HC, it should be 48/4=12 (MHz).

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11 23:58:40 -05:00
Stefan Nilsson XK 052d81da6e mmc: sdio: Fix to support any block size optimally
This patch allows any block size to be set on the SDIO link,
and still have an arbitrary sized packet (adjusted in size by
using sdio_align_size) transferred in an optimal way
(preferably one transfer).

Previously if the block size was larger than the default of
512 bytes and the transfer size was exactly one block size
(possibly thanks to using sdio_align_size to get an optimal
transfer size), it was sent as a number of byte transfers instead
of one block transfer. Also if the number of blocks was
(max_blocks * N) + 1, the tranfer would be conducted with a number
of blocks and finished off with a number of byte transfers.

When doing this change it was also possible to break out the quirk
for broken byte mode in a much cleaner way, and collect the logic of
when to do byte or block transfer in one function instead of two.

Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com>
Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11 23:58:40 -05:00
Qiang Liu fffe5d5aa0 mmc: sd: Macro name cleanup for high speed dtr
Add new macros for the high speed 50MHz case, rather than having
a confusing reuse of the value for UHS SDR50, which is 100MHz.

Reported-by: Aaron Lu <aaron.lu@amd.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-11 23:58:40 -05:00
Linus Torvalds 979ecef5b8 clock management changes for i.MX
Another simple series related to clock management, this time only for
 imx.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUATwta7GCrR//JCVInAQJD6A//ZbZtOEctF1nfrpQ6LeoPdJFWUt/4d+GX
 JW2CksR94AB1BqTNV0N0a/pRUNTEo5bBVzeXJw8XnJSCNnIakJpFoeZBh93YTOsO
 ZfuxhYwkVrbCusELaltrSdj5lUW/KgE58vTpfCkkqGgyMQQTzH73zJyjNOYAaWAK
 FleQ5jCpxm3FqoA5jp9+7xcHwF+o2btKXzM4kyEO/cAaypEIOz83qAK16FKzIvuI
 ba9QgMXN5sAKwNMIkNYJruHknlshGT00NBlYJebT0MXbd7pyuN9VsIfMMEQ+VG8B
 3hvfVvHrVeHiWoqdF0r8uxr/SZJiCZlE5RhDK1pO1MXPsroaOEAMSAeA/Y2193HK
 Dkz37iBBUf5T4mA5GfKb7dH4maM79OQ+SEtcQySF18hT+qCHeJV3J8WC0c7C81Ej
 7RFBJjFfpwKwd/SXFKn/PYmlgJZ4aW1+FNyx5xnIjBNpnU8N9knw2h1qGVvcjp+V
 SRQ7zghQToDY425U0ziiFle3XsrC/a0QZrzbFo+rqgUXMZQ2Vq7CiZr/E8QNsbiE
 I0AVE6hlWEx3aXgDoHKb0K3kSthIT7QkmO2UjhJmplEIjgVZw+vfjmAM9O+AeWJC
 BYLzgl2CRAZekNBD77aUdB1VUVz2cUUQ2zgh0wH11k2ca2+h3Lyw4buzsV4u3nxj
 Fqinw2GEt2U=
 =czKE
 -----END PGP SIGNATURE-----

Merge tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

clock management changes for i.MX

Another simple series related to clock management, this time only for
imx.

* tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: mxs: select HAVE_CLK_PREPARE for clock
  clk: add config option HAVE_CLK_PREPARE into Kconfig
  ASoC: mxs-saif: convert to clk_prepare/clk_unprepare
  video: mxsfb: convert to clk_prepare/clk_unprepare
  serial: mxs-auart: convert to clk_prepare/clk_unprepare
  net: flexcan: convert to clk_prepare/clk_unprepare
  mtd: gpmi-lib: convert to clk_prepare/clk_unprepare
  mmc: mxs-mmc: convert to clk_prepare/clk_unprepare
  dma: mxs-dma: convert to clk_prepare/clk_unprepare
  net: fec: add clk_prepare/clk_unprepare
  ARM: mxs: convert platform code to clk_prepare/clk_unprepare
  clk: add helper functions clk_prepare_enable and clk_disable_unprepare

Fix up trivial conflicts in drivers/net/ethernet/freescale/fec.c due to
commit 0ebafefcaa ("net: fec: add clk_prepare/clk_unprepare") clashing
trivially with commit e163cc97f9 ("net/fec: fix the .remove code").
2012-01-09 14:44:15 -08:00
Linus Torvalds 2ac9d7aacc Driver specific changes
Again, a lot of platforms have changes in here: pxa, samsung, omap,
 at91, imx, ...
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUATwtZUmCrR//JCVInAQL93hAAzBbSkswA4SD09UXHPSLGpbWd7JYuax9T
 sR17FvnQCV+0T8c7ORRbjoBrCrxKkxuPMkFrfIHuTaP+beYe13CwTf2mV+dtnuv2
 hSjSjdgCq+yv+CvRZhRnmHqmEePN1dvRoC9Q/EVPEibJNJ4BjrTALMfkXbsTz861
 BOmcD7VGi0YfPhwRQ3D00MjohCflRoV2EmceHCUvH4HLEgpWcWl16UZeuWGn6BiA
 GJK37O2ubKz0hkExAH6NHEaRxeFsapjh8kkR8/dOoNh/iIlmmR5SRPOxMPWFD0ui
 lUeSc6QjMipHCzkfE7jUx6MICDZfRx+WRWVTwa/OTLJjJtY+zcRnUvoLl84XJqgX
 EG5YhyL+Os4Z0ci92uSK3rwYQ2AJz/r4dS6VWnAVVJHSc8zHCuioJL4KcF81llcz
 1dshlHkB1H1EeVrf08OM/1xX0X7SNzVJlQ801OZj31DYYtMqvrev72vn+tvJh6kL
 o9gZsOSl3cIlFi8cAK0WmZmwGHw4wfUDZb1ojN6GDctdrp/Vmwe3exHleWvfSDtN
 QBw4WyHl46JGw4bFVQ4hRH3vJZNuiso+ZNZvG3qGaEMfpNY5aMTy7lrxI/GFbFkA
 tEnhkDgjutEZ/B6nEF1h8cCrcLND7u4n209kJh6UR1Qx3a6xD/M/ycE4tisNuPE3
 wSSYuM1ZGTU=
 =vPhu
 -----END PGP SIGNATURE-----

Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Driver specific changes

Again, a lot of platforms have changes in here: pxa, samsung, omap,
at91, imx, ...

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  ARM: sa1100: clean up of the clock support
  ARM: pxa: add dummy clock for sa1100-rtc
  RTC: sa1100: support sa1100, pxa and mmp soc families
  RTC: sa1100: remove redundant code of setting alarm
  RTC: sa1100: Clean out ost register
  Input: zylonite-wm97xx - replace IRQ_GPIO() with gpio_to_irq()
  pcmcia: pxa: replace IRQ_GPIO() with gpio_to_irq()
  ARM: EXYNOS: Modified files for SPI consolidation work
  ARM: S5P64X0: Enable SDHCI support
  ARM: S5P64X0: Add lookup of sdhci-s3c clocks using generic names
  ARM: S5P64X0: Add HSMMC setup for host Controller
  ARM: EXYNOS: Add USB OHCI support to ORIGEN board
  USB: Add Samsung Exynos OHCI diver
  ARM: EXYNOS: Add USB OHCI support to SMDKV310 board
  ARM: EXYNOS: Add USB OHCI device
  net: macb: fix build break with !CONFIG_OF
  i2c: tegra: Support DVC controller in device tree
  i2c: tegra: Add __devinit/exit to probe/remove
  net/at91_ether: use gpio_is_valid for phy IRQ line
  ARM: at91/net: add macb ethernet controller in 9g45/9g20 DT
  ...
2012-01-09 14:39:22 -08:00
Linus Torvalds 5ede3ceb7b New feature development
This adds support for new features, and contains stuff from most
 platforms. A number of these patches could have fit into other
 branches, too, but were small enough not to cause too much
 confusion here.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUATwtYgGCrR//JCVInAQKzRRAAybELlfOIT1fyVlzkzIgw0/OKxS75Vqda
 v5mNYUfQ001WxGjwbFGgFphrQgyhulmLj6gN5l1rwaBjEZlwLe5uk3sReeqeDMLk
 bERLbpg22ymka4JVhvugq5qh9UP2ptlvZV/cAZC0u2JBq+CaarFIJsrzbOyXAngf
 4kUkaMhKi8DDZTqrwwACaLxR7qtf3ddiSxNLZ93X4fDh4a3qs/EJErVg/xCFlfM3
 YTzTjKuqLV2cGT34E9YTJieN9o94G+PiqvbDsP3kOwG2dSElpRWsZwX/0hDoyCxN
 cWbqPfrrdzt/kDcNnNd8MZ16AJlPc4ElVVEWPF71tKP3HfKqtZ0vMlpzsldioFz6
 8AKvaXJXRkRddY4KqNcXeEQHcDxO0uniG/3lhZY8NlzO/1PnPQ4hGl8fhw+e/2z0
 nAQFUsCVIXacsxamPk/fFBUhYzyK7JrnH4pB3b7SPcCj7X9MVyWK+pbT5LA+VGOL
 Ys8tv3NtTWEObyW1s3NT+BEy9FkkRu4EG3TxPwHUXk4BTwa6nDmJBPjk7Hv7q4cn
 T58lPet8Aylhht2aZx+0dxK3MHtMOmgsJ5jQF0OAi48Kmx8kXPZ1AeXObROncbZL
 aI7qfuGTzps7MlUBYlmrMdceTfYLeOqIEoVyFX8N4xLE33alk8DMKc37QoTJVuxQ
 KrY8sCVMkK0=
 =N2B4
 -----END PGP SIGNATURE-----

Merge tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

New feature development

This adds support for new features, and contains stuff from most
platforms. A number of these patches could have fit into other
branches, too, but were small enough not to cause too much
confusion here.

* tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
  mfd/db8500-prcmu: remove support for early silicon revisions
  ARM: ux500: fix the smp_twd clock calculation
  ARM: ux500: remove support for early silicon revisions
  ARM: ux500: update register files
  ARM: ux500: register DB5500 PMU dynamically
  ARM: ux500: update ASIC detection for U5500
  ARM: ux500: support DB8520
  ARM: picoxcell: implement watchdog restart
  ARM: OMAP3+: hwmod data: Add the default clockactivity for I2C
  ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34xx/35xx <= ES2.1
  ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP4
  ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3
  ARM: OMAP: hwmod data: Add support for AM35xx UART4/ttyO3
  ARM: Orion: Remove address map info from all platform data structures
  ARM: Orion: Get address map from plat-orion instead of via platform_data
  ARM: Orion: mbus_dram_info consolidation
  ARM: Orion: Consolidate the address map setup
  ARM: Kirkwood: Add configuration for MPP12 as GPIO
  ARM: Kirkwood: Recognize A1 revision of 6282 chip
  ARM: ux500: update the MOP500 GPIO assignments
  ...
2012-01-09 14:38:51 -08:00
Linus Torvalds 190a44e65b Cleanups for the Samsung platforms
Various cleanup changes that the device driver changes are built upon.
 Since the samsung cleanups depend on the device tree series, which
 depends on the first set of cleanups for tegra.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUATwtVImCrR//JCVInAQINpQ//c/PM6f3QCd7K5IGIGLUTmbY6aWibkxIG
 YINVYwyr+V3VgdKu3XuKDL7dS6/eKje8pZU0qfMInDr+c0tuvfw2S2YVoZUm+xcO
 z5smwgAlnX/qMGzuKQFwsu44VzKLv39MYDIQp3l2xGNHLQ1K51iIn0nSQdo3d/09
 Cegk6dwjKL4D4oGU+hVKNIJGqjg8sVCspAriB10wYLO7YjBnWjyp8ZLjvAfVYPOK
 HykIL7OwkiMHcgkoPZgqM4ApiDhqu7Mw1/EkeyNn91JE0eSY9QfZ2UzI9l2XffqI
 rt3/8l00EB19PlVuTD3fnQquCOQjyjxCVvGWLSeZYqsJiyr1HqjI+jIF1QvVbESG
 vKC4YPVv/uHM8P8cmwIMgfIUhnneMdqBvjZxBINKkASDsptAl8G/9GCWoWBcHKn4
 c7EfiJIYaDd/Po1rvt49N0lOTQnIkQ5+hzVUOnEJQ2CtM9/S5KqjaqXcsXmH3DSn
 MDKAs1I3AjmFU3bG5G2TQUpQIsBKRhZCf+paeeg+hRFrygpBy8y0kufIUN8FcG+I
 prQuaXCV9eKgXscgZUNzSr6yQ8ElS8iRVQNH1woOGqlPk506qdf2jOhWHO4wUwEt
 I1eLvJuuodBP+RsZMHagpJw2SqGgBvMi4xIlcCg9NT1LbuqXVhqokZsO20X3I1MD
 HpMhvCPMyxw=
 =7e+y
 -----END PGP SIGNATURE-----

Merge tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Cleanups for the Samsung platforms

Various cleanup changes that the device driver changes are built upon.
Since the samsung cleanups depend on the device tree series, which
depends on the first set of cleanups for tegra.

* tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: EXYNOS: Use gpio_request_one
  ARM: S5PV210: Use gpio_request_one
  ARM: S3C64XX: Modified according to SPI consolidation work
  ARM: S5PV210: Modified files for SPI consolidation work
  ARM: S5P64X0: Modified files for SPI consolidation work
  ARM: S5PC100: Modified files for SPI consolidation work
  ARM: S3C64XX: Modified files for SPI consolidation work
  ARM: SAMSUNG: Consolidation of SPI platform devices to plat-samsung
  ARM: SAMSUNG: Remove SPI bus clocks from platform data
  ARM: S5PV210: Add SPI clkdev support
  ARM: S5P64X0: Add SPI clkdev support
  ARM: S5PC100: Add SPI clkdev support
  ARM: S3C64XX: Add SPI clkdev support
  spi/s3c64xx: Use bus clocks created using clkdev
  mmc: sdhci-s3c: Use generic clock names for sdhci bus clock options
  ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names
  ARM: SAMSUNG: Remove SDHCI bus clocks from platform data
  ARM: SAMSUNG: Use kmemdup rather than duplicating its implementation
  ARM: EXYNOS: remove exynos4_scu_enable()
2012-01-09 14:30:28 -08:00
Linus Torvalds acc952c1f3 Cleanups on various subarchitectures
Cleanup patches for various ARM platforms and some of their associated
 drivers, the bulk of these is for mach-91.
 
 I ended up pulling in the restart branch from Russell in order to
 fix up some simple but annoying merge conflicts.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUATwtcbmCrR//JCVInAQLONg/+PnaGQ9gt+dRQD1kzvOl1uE4veBD4KJ3j
 k3ew36OpcbkjKbcZjkN42tXbM5nBAC5A9w+iKy0RZvvxO+iay8A3IdYhlnpJhMCY
 LLvv8bUltR3iB5BPJO8MXgUAkHbec/8yGZ+Zu9LfQOC8LvaXW4ARiy7RLuA01MAM
 EUyL0cSAS5iztlJ1j9qwaQ+k6kReLSVkG1MRcTjPwHu75zWA2ADdQmkfb1jo6v9o
 3NF4QX2aw2tpPWn7B443irVLiZFG01gBugktl2z4VcNEHLHaU7eJUddh9146FVFd
 WZPz6y4qJHXJkAsL2QdEHwCet2yphf32XXAGJVVOSsr5EEqfAawPLQCt8qPaN6Un
 M+BLVlf3Wtv6JmGC+ECYvHEKdu04Zw1ia43cG7VOCgpoZjdo2HgaHIjL2t96Zj7N
 OpESMNiSp8++G7Gw+TxovDG93nBT459A12i3xhf/ljz2X1ADDSc6S0h+Vfi17201
 XcLH9ctJn17TfO8+KBwSYM3W3V1I6APHoKRN41q4u+fHnxu93jLnMeGDqRyscxRq
 BWvH1XmbkLBEb0HPtN30rTkVEnOMx4ZozM6/htVrdSRLKO+ss7XCRXLbWZxx3mWb
 sCvc1E5A1GmPmhOE8P+DqFVZlZXsIVHPsnp/nLjzCZFsIv0x2RdGjd7wXK605z0Z
 d+u3fNUEiHA=
 =9q+1
 -----END PGP SIGNATURE-----

Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Cleanups on various subarchitectures

Cleanup patches for various ARM platforms and some of their associated
drivers, the bulk of these is for mach-91.

Arnd ended up pulling in the restart branch from Russell in order to
fix up some simple but annoying merge conflicts.

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
  arm/at91: fix build of stamp9g20
  ARM: u300: delete memory.h
  MAINTAINERS: add maintainer entry for Picochip picoxcell
  ARM: picoxcell: move io mappings to common.c
  ARM: picoxcell: don't reserve irq_descs
  ARM: picoxcell: remove mach/memory.h
  ARM: at91: delete the pcontrol_g20_defconfig
  arm/tegra: Remove code that's ifndef CONFIG_ARM_GIC
  arm/tegra: remove unused defines
  arm/tegra: fix variable formatting in makefile
  ARM: davinci: vpif: move code to driver core header from platform
  ARM: at91/gpio: fix display of number of irq setuped
  ARM: at91/gpio: drop PIN_BASE
  ARM: at91/udc: use gpio_is_valid to check the gpio
  ARM: at91/ohci: use gpio_is_valid to check the gpio
  ARM: at91/nand: use gpio_is_valid to check the gpio
  ARM: at91/mmc: use gpio_is_valid to check the gpio
  ARM: at91/ide: use gpio_is_valid to check the gpio
  ARM: at91/pata: use gpio_is_valid to check the gpio
  ARM: at91/soc: use gpio_is_valid to check the gpio
  ...
2012-01-09 14:21:03 -08:00
Arnd Bergmann dcf7ec5ee6 Merge branch 'samsung/driver' into next/drivers
Conflicts:
	arch/arm/mach-mxs/include/mach/common.h

Pull in previous samsung conflict merges and do a trivial
merge of an mxs double-add conflict.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-01-09 16:16:29 +00:00
Arnd Bergmann a07613a54d Merge branch 'samsung/dt' into samsung/cleanup
Conflicts:
	arch/arm/mach-s3c64xx/Makefile
	arch/arm/mach-s5pc100/Makefile
	arch/arm/mach-s5pv210/Makefile

Pull in previously resolved conflicts:

The Makefiles were reorganized in the "rmk/restart" series and modified
in the "samsung/cleanup series". This also pulls in the other conflict
resolutions from the restart series against the samsung/dt series.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-01-09 16:01:00 +00:00
Linus Torvalds 98793265b4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits)
  Kconfig: acpi: Fix typo in comment.
  misc latin1 to utf8 conversions
  devres: Fix a typo in devm_kfree comment
  btrfs: free-space-cache.c: remove extra semicolon.
  fat: Spelling s/obsolate/obsolete/g
  SCSI, pmcraid: Fix spelling error in a pmcraid_err() call
  tools/power turbostat: update fields in manpage
  mac80211: drop spelling fix
  types.h: fix comment spelling for 'architectures'
  typo fixes: aera -> area, exntension -> extension
  devices.txt: Fix typo of 'VMware'.
  sis900: Fix enum typo 'sis900_rx_bufer_status'
  decompress_bunzip2: remove invalid vi modeline
  treewide: Fix comment and string typo 'bufer'
  hyper-v: Update MAINTAINERS
  treewide: Fix typos in various parts of the kernel, and fix some comments.
  clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR
  gpio: Kconfig: drop unknown symbol 'CS5535_GPIO'
  leds: Kconfig: Fix typo 'D2NET_V2'
  sound: Kconfig: drop unknown symbol ARCH_CLPS7500
  ...

Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new
kconfig additions, close to removed commented-out old ones)
2012-01-08 13:21:22 -08:00
Linus Torvalds 972b2c7199 Merge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (165 commits)
  reiserfs: Properly display mount options in /proc/mounts
  vfs: prevent remount read-only if pending removes
  vfs: count unlinked inodes
  vfs: protect remounting superblock read-only
  vfs: keep list of mounts for each superblock
  vfs: switch ->show_options() to struct dentry *
  vfs: switch ->show_path() to struct dentry *
  vfs: switch ->show_devname() to struct dentry *
  vfs: switch ->show_stats to struct dentry *
  switch security_path_chmod() to struct path *
  vfs: prefer ->dentry->d_sb to ->mnt->mnt_sb
  vfs: trim includes a bit
  switch mnt_namespace ->root to struct mount
  vfs: take /proc/*/mounts and friends to fs/proc_namespace.c
  vfs: opencode mntget() mnt_set_mountpoint()
  vfs: spread struct mount - remaining argument of next_mnt()
  vfs: move fsnotify junk to struct mount
  vfs: move mnt_devname
  vfs: move mnt_list to struct mount
  vfs: switch pnode.h macros to struct mount *
  ...
2012-01-08 12:19:57 -08:00
Arnd Bergmann 928a11ba36 Merge branch 'next/cleanup' into samsung/dt
Conflicts:
	arch/arm/mach-exynos/common.c

The common.c file gets changes from rmk/stable-devel (part of
next/cleanup), rmk/restart, samsung/dt and follow-on branches
from the samsung tree.

Pulling it all together here hopefully avoids having to do
even more conflicting merge changesets in this one file. What
a mess!

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-01-07 20:23:00 +00:00
Linus Torvalds 7affca3537 Merge branch 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (73 commits)
  arm: fix up some samsung merge sysdev conversion problems
  firmware: Fix an oops on reading fw_priv->fw in sysfs loading file
  Drivers:hv: Fix a bug in vmbus_driver_unregister()
  driver core: remove __must_check from device_create_file
  debugfs: add missing #ifdef HAS_IOMEM
  arm: time.h: remove device.h #include
  driver-core: remove sysdev.h usage.
  clockevents: remove sysdev.h
  arm: convert sysdev_class to a regular subsystem
  arm: leds: convert sysdev_class to a regular subsystem
  kobject: remove kset_find_obj_hinted()
  m86k: gpio - convert sysdev_class to a regular subsystem
  mips: txx9_sram - convert sysdev_class to a regular subsystem
  mips: 7segled - convert sysdev_class to a regular subsystem
  sh: dma - convert sysdev_class to a regular subsystem
  sh: intc - convert sysdev_class to a regular subsystem
  power: suspend - convert sysdev_class to a regular subsystem
  power: qe_ic - convert sysdev_class to a regular subsystem
  power: cmm - convert sysdev_class to a regular subsystem
  s390: time - convert sysdev_class to a regular subsystem
  ...

Fix up conflicts with 'struct sysdev' removal from various platform
drivers that got changed:
 - arch/arm/mach-exynos/cpu.c
 - arch/arm/mach-exynos/irq-eint.c
 - arch/arm/mach-s3c64xx/common.c
 - arch/arm/mach-s3c64xx/cpu.c
 - arch/arm/mach-s5p64x0/cpu.c
 - arch/arm/mach-s5pv210/common.c
 - arch/arm/plat-samsung/include/plat/cpu.h
 - arch/powerpc/kernel/sysfs.c
and fix up cpu_is_hotpluggable() as per Greg in include/linux/cpu.h
2012-01-07 12:03:30 -08:00
Arnd Bergmann 40ba95fdf1 Merge branch 'depends/rmk/restart' into next/cleanup
Conflicts:
	arch/arm/mach-at91/at91cap9.c
	arch/arm/mach-at91/at91sam9260.c
	arch/arm/mach-at91/at91sam9261.c
	arch/arm/mach-at91/at91sam9263.c
	arch/arm/mach-at91/at91sam9g45.c
	arch/arm/mach-at91/at91sam9rl.c
	arch/arm/mach-exynos/cpu.c
	arch/arm/mach-shmobile/board-kota2.c

This resolves a bunch of conflicts between the arm-soc tree
and changes from the arm tree that have gone upstream.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-01-07 11:51:28 +00:00
Linus Torvalds d3d0b02434 Merge branch 'amba-modalias' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm
* 'amba-modalias' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm:
  sound: aaci: Enable module alias autogeneration for AMBA drivers
  watchdog: sp805: Enable module alias autogeneration for AMBA drivers
  fbdev: amba: Enable module alias autogeneration for AMBA drivers
  serial: pl011: Enable module alias autogeneration for AMBA drivers
  serial: pl010: Enable module alias autogeneration for AMBA drivers
  spi: pl022: Enable module alias autogeneration for AMBA drivers
  rtc: pl031: Enable module alias autogeneration for AMBA drivers
  rtc: pl030: Enable module alias autogeneration for AMBA drivers
  mmc: mmci: Enable module alias autogeneration for AMBA drivers
  input: ambakmi: Enable module alias autogeneration for AMBA drivers
  gpio: pl061: Enable module alias autogeneration for AMBA drivers
  dmaengine: pl330: Enable module alias autogeneration for AMBA drivers
  dmaengine: pl08x: Enable module alias autogeneration for AMBA drivers
  hwrng: nomadik: Enable module alias autogeneration for AMBA drivers
  ARM: amba: Auto-generate AMBA driver module aliases during modpost
  ARM: amba: Move definition of struct amba_id to mod_devicetable.h
2012-01-06 18:03:30 -08:00
Greg Kroah-Hartman ff4b8a57f0 Merge branch 'driver-core-next' into Linux 3.2
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file,
and it fixes the build error in the arch/x86/kernel/microcode_core.c
file, that the merge did not catch.

The microcode_core.c patch was provided by Stephen Rothwell
<sfr@canb.auug.org.au> who was invaluable in the merge issues involved
with the large sysdev removal process in the driver-core tree.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-06 11:42:52 -08:00
Al Viro f4ae40a6a5 switch debugfs to umode_t
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:56 -05:00
Arnd Bergmann e1482a1708 Merge branch 'mxs/clk-prepare' of git://git.linaro.org/people/shawnguo/linux-2.6 into imx/clk 2012-01-03 20:34:14 +00:00
Al Viro d36b691077 misc latin1 to utf8 conversions
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-02 13:04:55 +01:00
Linus Torvalds 06867fbb8a Merge branch 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm
* 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm:
  ARM: 7237/1: PL330: Fix driver freeze
  ARM: 7197/1: errata: Remove SMP dependency for erratum 751472
  ARM: 7196/1: errata: Remove SMP dependency for erratum 720789
  ARM: 7220/1: mmc: mmci: Fixup error handling for dma
  ARM: 7214/1: mmc: mmci: Fixup handling of MCI_STARTBITERR
2011-12-30 13:45:34 -08:00
Shawn Guo efdfc52c04 mmc: mxs-mmc: convert to clk_prepare/clk_unprepare
The patch converts mxs-mmc driver to clk_prepare/clk_unprepare by
using helper functions clk_prepare_enable/clk_disable_unprepare.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Chris Ball <cjb@laptop.org>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
2011-12-28 21:30:06 +08:00
Arnd Bergmann bd4b9ba4cf Merge branch 'samsung/cleanup' into next/drivers
Dependency for the samsung/drivers branch

Conflicts:
	arch/arm/mach-exynos/Makefile

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-12-28 00:18:10 +00:00
Arnd Bergmann 4551ae0a24 Merge branch 'v3.2-rc6' into next/drivers 2011-12-27 23:41:33 +00:00
Shawn Guo a4e3e86d66 mmc: mxs-mmc: fix the dma_transfer_direction migration
The commit 05f5799 (mmc-host: move to dma_transfer_direction) left out
the DMA_NONE, in turn breaks the driver as below.

[    0.650000] mxs-mmc mxs-mmc.0: initialized
[    0.650000] mxs-mmc mxs-mmc.1: initialized
[    0.690000] mxs-dma mxs-dma-apbh: maximum bytes for sg entry exceeded: -55906
7475 > 65280
[    0.690000] mxs-mmc mxs-mmc.0: mxs_mmc_ac: failed to prep dma

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-12-23 21:33:15 +05:30
Rajeshwari Shinde 4346b6d9c6 mmc: sdhci-s3c: Use generic clock names for sdhci bus clock options
This patch modifies the driver to stop depending on the clock names
being passed from the platform and switch over to bus clock lookup
using generic clock names.

Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2011-12-23 10:09:22 +09:00
Rusty Russell 61074287c2 mmc: vub300: fix type of firmware_rom_wait_states module parameter
You didn't mean this to be a bool.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Tony Olech <tony.olech@elandigitalsystems.com>
Cc: <stable@kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-19 15:56:09 -08:00
Ohad Ben-Cohen 5c7f0e083d Revert "mmc: enable runtime PM by default"
When SDIO runtime PM was originally introduced, we immediately faced
two regressions with two different chipsets, and in response decided
not to enable it by default.

With the recent work on the 8686 we hoped we found all the gotchas,
so 08da834 did make sense (at least experimentally).

Unfortunately we now see that some setups out there still refuse to
work when SDIO runtime PM is enabled by default (see
http://www.spinics.net/lists/linux-mmc/msg11161.html), and obviously
we can't live with these kind of regressions.

This reverts commit 08da834a24.

Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Daniel Drake <dsd@laptop.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-19 15:51:38 -08:00
Manuel Lauss 29495aa04a mmc: sdhci: remove "state" argument from sdhci_suspend_host
Drop the "state" argument from sdhci_suspend_host.  Its only user is the
PCI glue;  this allows to move all SDHCI glues to use dev_pm_ops instead.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-19 15:50:11 -08:00
Ulf Hansson 3b6e3c7385 ARM: 7220/1: mmc: mmci: Fixup error handling for dma
When getting a cmd irq during an ongoing data transfer
with dma, the dma job were never terminated. This is now
corrected.

Cc: <stable@vger.kernel.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Per Forlin <per.forlin@stericsson.com>
Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-18 23:07:22 +00:00
Ulf Hansson b63038d6f4 ARM: 7214/1: mmc: mmci: Fixup handling of MCI_STARTBITERR
The interrupt was previously enabled and then correctly cleared.
Now we also handle it correctly.

Cc: <stable@vger.kernel.org>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-18 23:05:57 +00:00
Andrew Lunn 63a9332b23 ARM: Orion: Get address map from plat-orion instead of via platform_data
Use an getter function in plat-orion/addr-map.c to get the address map
structure, rather than pass it to drivers in the platform_data
structures. When the drivers are built for none orion platforms, a
dummy function is provided instead which returns NULL.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Michael Walle <michael@walle.cc>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-12-13 18:46:55 -05:00
Sujit Reddy Thumma 49df780749 mmc: core: Fix deadlock when the CONFIG_MMC_UNSAFE_RESUME is not defined
mmc_suspend_host() tries to claim host during suspend
and release it only when the bus suspend operation is
compeleted. If CONFIG_MMC_UNSAFE_RESUME is defined and
the host is flagged as removable, mmc_suspend_host()
tries to remove the card. In this process, the file system
sync can get blocked trying to acquire host which is already
claimed by mmc_suspend_host() causing deadlock.

Fix this deadlock by releasing host before ->remove() is called.

Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Acked-by: Ulf Hansson <ulf.hansson@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10 16:18:39 -05:00
Mark Brown 524bfca2b4 mmc: sdhci-s3c: Remove old and misprototyped suspend operations
Now that the driver is using dev_pm_ops the suspend operations in the
platform_driver structure won't get called so don't need to be there,
and certainly shouldn't be the same function as dev_pm_ops since the
signatures are different.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10 16:18:39 -05:00
Guennadi Liakhovetski f6b8b52c68 mmc: tmio: fix clock gating on platforms with a .set_pwr() method
Do not power down the card in .set_ios(), unless MMC_POWER_OFF is
requested. This fixes the SDHI functionality on ecovec.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10 16:18:38 -05:00
Guennadi Liakhovetski f6bc41fb08 mmc: sh_mmcif: fix clock gating on platforms with a .down_pwr() method
Do not power down the card in .set_ios(), unless MMC_POWER_OFF is
requested. This fixes the MMCIF interface functionality on ecovec boards.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10 16:18:37 -05:00
Kyungmin Park c99872a16f mmc: core: Fix typo at mmc_card_sleep
Fix wrong bus_ops->sleep check.  (This isn't expected to have real-world
consequences, because the mmc core always defines both 'awake' and
'sleep' ops.)

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10 16:18:37 -05:00
Girish K S a80f162763 mmc: core: Fix power_off_notify during suspend
The eMMC 4.5 devices respond to only RESET and AWAKE command in the
sleep state. Hence the mmc switch command to notify power off state
should be sent before the device enters sleep state.

This patch fixes the same.

Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10 16:18:36 -05:00
Girish K S 96a85d548b mmc: core: Fix setting power notify state variable for non-eMMC
This patch skips the setting of the power notify state variable
for non eMMC 4.5 devices. Also fixes the problem of omap_hsmmc
noisy/broken for suspend resume reported by Kevin Hilman.

Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@stericsson.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10 16:18:36 -05:00
Stefan Nilsson XK 6de5fc9cf7 mmc: core: Add quirk for long data read time
Adds a quirk that sets the data read timeout to a fixed value instead
of relying on the information in the CSD. The timeout value chosen
is 300ms since that has proven enough for the problematic cards found,
but could be increased if other cards require this.

This patch also enables this quirk for certain Micron cards known to
have this problem.

Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com>
Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: <stable@kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10 16:18:35 -05:00
Chris Ball 7833c66b2d mmc: Add module.h include to sdhci-cns3xxx.c
Fixes: drivers/mmc/host/sdhci-cns3xxx.c:110: error: 'THIS_MODULE'
       undeclared here (not in a function)

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10 16:18:35 -05:00
Sascha Hauer e58f516ff4 mmc: mxcmmc: fix falling back to PIO
When we can't configure the dma channel we want to fall
back to PIO. We do this by setting host->do_dma to zero.
This does not work as do_dma is used to see whether dma
can be used for the current transfer. Instead, we have
to set host->dma to NULL.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: <stable@kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10 16:18:34 -05:00
Eliad Peller 6fdc75de7d ARM: OMAP: hsmmc: add pm_caps field
Add pm_caps field to omap2_hsmmc_info and omap_mmc_slot_data
structs, so we will be able to indicate mmc pm capabilities
in the board file.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-08 16:26:20 -08:00
Eliad Peller 31f9d4635b omap_hsmmc: consider MMC_PM_KEEP_POWER on suspend/resume
When an mmc card has the MMC_PM_KEEP_POWER flag, it shouldn't
be powered off on suspend (and thus doesn't have to be powered-on
on resume)

While on it, change the suspend flow a bit, to make it a bit
easier to follow.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-08 16:24:09 -08:00
Per Forlin 053bf34f5a mmc: omap_hsmmc: DMA unmap only once in case of MMC error
Reported by Russell King:
mmcblk0: error -84 transferring data, sector 149201, nr 64,
cmd response 0x900, card status 0xb00
mmcblk0: retrying using single block read

WARNING: at lib/dma-debug.c:811 check_unmap
omap_hsmmc omap_hsmmc.0: DMA-API: device driver tries to free DMA memory
it has not allocated [device address=0x0000000080933000] [size=20480 bytes]

In case of an error dma_unmap() is issued in omap_hsmmc_dma_cleanup()
and then again in omap_hsmmc_post_req(). Resolve this by clearing the
host_cookie to indicate there is no DMA mapped memory to unmap.

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Tested-by: Balaji T K <balajitk@ti.com>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-07 23:10:56 -05:00
Manuel Lauss 809f36c6f4 MIPS: Alchemy: Au1300 SoC support
Add basic support for the Au1300 variant(s):
- New GPIO/Interrupt controller
- DBDMA ids
- USB setup
- MMC support
- enable various PSC drivers
- detection code.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2866/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:02:05 +00:00
Jean-Christophe PLAGNIOL-VILLARD 53a33bded0 ARM: at91/mmc: use gpio_is_valid to check the gpio
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-29 15:46:16 +00:00
Dave Martin 9f99835f11 mmc: mmci: Enable module alias autogeneration for AMBA drivers
Signed-off-by: Dave Martin <dave.martin@linaro.org>
2011-11-22 10:58:31 +00:00
Greg Kroah-Hartman fe7484834b USB: convert some miscellanies drivers to use module_usb_driver()
This converts the remaining USB drivers in the kernel to use the
module_usb_driver() macro which makes the code smaller and a bit
simpler.

Added bonus is that it removes some unneeded kernel log messages about
drivers loading and/or unloading.

Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Till Harbaum <till@harbaum.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org>
Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Steve Glendinning <steve.glendinning@smsc.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jesper Juhl <jj@chaosbits.net>
Cc: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: Jamie Iles <jamie@jamieiles.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18 09:52:10 -08:00
Vinod Koul e0d23ef29e Merge branch 'dma_slave_direction' into next_test_dirn
resolved conflicts:
	drivers/media/video/mx3_camera.c
2011-11-17 14:54:57 +05:30
Shawn Guo f750ba9b8d arm/imx: fix imx6q mmc error when mounting rootfs
The following error is seen in some case when mounting rootfs from
SD/MMC cards.

  Waiting for root device /dev/mmcblk0p1...
  mmc1: host does not support reading read-only switch. assuming write-enable.
  mmc1: new high speed SDHC card at address b368
  mmcblk0: mmc1:b368 SDC   3.74 GiB
   mmcblk0: p1
  mmc1: Timeout waiting for hardware interrupt.
  mmcblk0: error -110 transferring data, sector 3678224, nr 40, cmd response 0x900, card status 0xc00
  end_request: I/O error, dev mmcblk0, sector 3678225
  Buffer I/O error on device mmcblk0p1, logical block 458754
  lost page write due to I/O error on mmcblk0p1

This patch fixes the problem by lowering the usdhc clock and correcting
watermark configuration.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Chris Ball <cjb@laptop.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-11-11 16:53:35 +01:00
Linus Torvalds 32aaeffbd4 Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include <linux/module.h>
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include <linux/module.h>
  net: sch_generic remove redundant use of <linux/module.h>
  net: inet_timewait_sock doesnt need <linux/module.h>
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h
2011-11-06 19:44:47 -08:00
Linus Torvalds fba9569924 Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (63 commits)
  dmaengine: mid_dma: mask_peripheral_interrupt only when dmac is idle
  dmaengine/ep93xx_dma: add module.h include
  pch_dma: Reduce wasting memory
  pch_dma: Fix suspend issue
  dma/timberdale: free_irq() on an error path
  dma: shdma: transfer based runtime PM
  dmaengine: shdma: protect against the IRQ handler
  dmaengine i.MX DMA/SDMA: add missing include of linux/module.h
  dmaengine: delete redundant chan_id and chancnt initialization in dma drivers
  dmaengine/amba-pl08x: Check txd->llis_va before freeing dma_pool
  dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers
  serial: sh-sci: don't filter on DMA device, use only channel ID
  ARM: SAMSUNG: Remove Samsung specific enum type for dma direction
  ASoC: Samsung: Update DMA interface
  spi/s3c64xx: Merge dma control code
  spi/s3c64xx: Add support DMA engine API
  ARM: SAMSUNG: Remove S3C-PL330-DMA driver
  ARM: S5P64X0: Use generic DMA PL330 driver
  ARM: S5PC100: Use generic DMA PL330 driver
  ARM: S5PV210: Use generic DMA PL330 driver
  ...

Fix up fairly trivial conflicts in
 - arch/arm/mach-exynos4/{Kconfig,clock.c}
 - arch/arm/mach-s5p64x0/dma.c
2011-11-04 18:02:25 -07:00
Linus Torvalds d6748066ad Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits)
  MIPS: O32: Provide definition of registers ta0 .. ta3.
  MIPS: perf: Add Octeon support for hardware perf.
  MIPS: perf: Add support for 64-bit perf counters.
  MIPS: perf: Reorganize contents of perf support files.
  MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c
  MIPS: Add accessor macros for 64-bit performance counter registers.
  MIPS: Add probes for more Octeon II CPUs.
  MIPS: Add more CPU identifiers for Octeon II CPUs.
  MIPS: XLR, XLS: Add comment for smp setup
  MIPS: JZ4740: GPIO: Check correct IRQ in demux handler
  MIPS: JZ4740: GPIO: Simplify IRQ demuxer
  MIPS: JZ4740: Use generic irq chip
  MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines
  MIPS: Alchemy: kill au1xxx.h header
  MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines
  MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep
  MIPS: Alchemy: Redo PCI as platform driver
  MIPS: Alchemy: more base address cleanup
  MIPS: Alchemy: rewrite USB platform setup.
  MIPS: Alchemy: abstract USB block control register access
  ...

Fix up trivial conflicts in:
	arch/mips/alchemy/devboards/db1x00/platform.c
	drivers/ide/Kconfig
	drivers/mmc/host/au1xmmc.c
	drivers/video/Kconfig
	sound/mips/Kconfig
2011-11-03 13:28:14 -07:00
Linus Torvalds 3f8ddb032a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock:
  hwspinlock: add MAINTAINERS entries
  hwspinlock/omap: omap_hwspinlock_remove should be __devexit
  hwspinlock/u8500: add hwspinlock driver
  hwspinlock/core: register a bank of hwspinlocks in a single API call
  hwspinlock/core: remove stubs for register/unregister
  hwspinlock/core: use a mutex to protect the radix tree
  hwspinlock/core/omap: fix id issues on multiple hwspinlock devices
  hwspinlock/omap: simplify allocation scheme
  hwspinlock/core: simplify 'owner' handling
  hwspinlock/core: simplify Kconfig

Fix up trivial conflicts (addition of omap_hwspinlock_pdata, removal of
omap_spinlock_latency) in arch/arm/mach-omap2/hwspinlock.c

Also, do an "evil merge" to fix a compile error in omap_hsmmc.c which
for some reason was reported in the same email thread as the "please
pull hwspinlock changes".
2011-11-03 08:05:35 -07:00
Linus Torvalds 16ee792e45 Merge branch 'next/devel' of git://git.linaro.org/people/arnd/arm-soc
* 'next/devel' of git://git.linaro.org/people/arnd/arm-soc: (50 commits)
  ARM: tegra: update defconfig
  arm/tegra: Harmony: Configure PMC for low-level interrupts
  arm/tegra: device tree support for ventana board
  arm/tegra: add support for ventana pinmuxing
  arm/tegra: prepare Seaboard pinmux code for derived boards
  arm/tegra: pinmux: ioremap registers
  gpio/tegra: Convert to a platform device
  arm/tegra: Convert pinmux driver to a platform device
  arm/dt: Tegra: Add pinmux node to tegra20.dtsi
  arm/tegra: Prep boards for gpio/pinmux conversion to pdevs
  ARM: mx5: fix clock usage for suspend
  ARM i.MX entry-macro.S: remove now unused code
  ARM i.MX boards: use CONFIG_MULTI_IRQ_HANDLER
  ARM i.MX tzic: add handle_irq function
  ARM i.MX avic: add handle_irq function
  ARM: mx25: Add the missing IIM base definition
  ARM i.MX avic: convert to use generic irq chip
  mx31moboard: Add poweroff support
  ARM: mach-qong: Add watchdog support
  ARM: davinci: AM18x: Add wl1271/wlan support
  ...

Fix up conflicts in:
	arch/arm/mach-at91/at91sam9g45.c
	arch/arm/mach-mx5/devices-imx53.h
	arch/arm/plat-mxc/include/mach/memory.h
2011-11-01 20:31:25 -07:00
Linus Torvalds 952414505f Merge branch 'next/cleanup' of git://git.linaro.org/people/arnd/arm-soc
* 'next/cleanup' of git://git.linaro.org/people/arnd/arm-soc: (125 commits)
  ARM: mach-mxs: fix machines' initializers order
  mmc: mxcmmc: explicitly includes mach/hardware.h
  arm/imx: explicitly includes mach/hardware.h in pm-imx27.c
  arm/imx: remove mx27_setup_weimcs() from mx27.h
  arm/imx: explicitly includes mach/hardware.h in mach-kzm_arm11_01.c
  arm/imx: remove mx31_setup_weimcs() from mx31.h
  ARM: tegra: devices.c should include devices.h
  ARM: tegra: cpu-tegra: unexport two functions
  ARM: tegra: cpu-tegra: sparse type fix
  ARM: tegra: dma: staticify some tables and functions
  ARM: tegra: tegra2_clocks: don't export some tables
  ARM: tegra: tegra_powergate_is_powered should be static
  ARM: tegra: tegra_rtc_read_ms should be static
  ARM: tegra: tegra_init_cache should be static
  ARM: tegra: pcie: 0 -> NULL changes
  ARM: tegra: pcie: include board.h
  ARM: tegra: pcie: don't cast __iomem pointers
  ARM: tegra: tegra2_clocks: 0 -> NULL changes
  ARM: tegra: tegra2_clocks: don't cast __iomem pointers
  ARM: tegra: timer: don't cast __iomem pointers
  ...

Fix up trivial conflicts in
  arch/arm/mach-omap2/Makefile,
  arch/arm/mach-u300/{Makefile.boot,core.c}
  arch/arm/plat-{mxc,omap}/devices.c
2011-11-01 20:11:00 -07:00
Paul Gortmaker 0205a904df mmc: Fix implicit use of stat.h header in associated files
Once the implicit use of module.h is prevented, these files will
fail to find the stat.h header content.

Fix up the implicit usage expectations in advance of the cleanup.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:32:07 -04:00
Paul Gortmaker 3ef77af154 mmc: Add export.h for EXPORT_SYMBOL/THIS_MODULE as required
These two basic defines were everywhere, simply because module.h
was also everywhere.   But we are cleaning up the latter.  So make
the exporters actually call out their need for the include.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:32:06 -04:00
Paul Gortmaker 96547f5d8b mmc: Add module.h to drivers/mmc users assuming implicit presence.
We are cleaning up the implicit presence of module.h; these guys are
some of the people who just assume it will be there.  Call it out
explitly for those that really need it.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:32:06 -04:00
Arnd Bergmann efa62e1355 Merge branch 'depends/rmk/gpio' into next/devel
Conflicts:
	arch/arm/mach-mxs/include/mach/gpio.h
	arch/arm/plat-mxc/include/mach/gpio.h

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-31 23:46:42 +01:00
Arnd Bergmann 3e965b1763 Merge branch 'next/fixes' into next/cleanup
Conflicts:
	arch/arm/mach-mxs/include/mach/gpio.h
	arch/arm/plat-mxc/include/mach/gpio.h
	drivers/video/omap/lcd_apollon.c
	drivers/video/omap/lcd_ldp.c
	drivers/video/omap/lcd_overo.c
2011-10-31 23:25:41 +01:00
Arnd Bergmann 43872fa788 Merge branch 'depends/rmk/gpio' into next/fixes
This sorts out merge conflicts with the arm/gpio branch that
already got merged into mainline Linux.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-31 22:44:18 +01:00
Vinod Koul 05f5799cbe mmc-host: move to dma_transfer_direction
fixup usage of dma direction by introducing dma_transfer_direction,
this patch moves mmc drivers to use new enum

Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Chris Ball <cjb@laptop.org>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-10-31 09:40:25 +05:30
Linus Torvalds 46b51ea209 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (83 commits)
  mmc: fix compile error when CONFIG_BLOCK is not enabled
  mmc: core: Cleanup eMMC4.5 conditionals
  mmc: omap_hsmmc: if multiblock reads are broken, disable them
  mmc: core: add workaround for controllers with broken multiblock reads
  mmc: core: Prevent too long response times for suspend
  mmc: recognise SDIO cards with SDIO_CCCR_REV 3.00
  mmc: sd: Handle SD3.0 cards not supporting UHS-I bus speed mode
  mmc: core: support HPI send command
  mmc: core: Add cache control for eMMC4.5 device
  mmc: core: Modify the timeout value for writing power class
  mmc: core: new discard feature support at eMMC v4.5
  mmc: core: mmc sanitize feature support for v4.5
  mmc: dw_mmc: modify DATA register offset
  mmc: sdhci-pci: add flag for devices that can support runtime PM
  mmc: omap_hsmmc: ensure pbias configuration is always done
  mmc: core: Add Power Off Notify Feature eMMC 4.5
  mmc: sdhci-s3c: fix potential NULL dereference
  mmc: replace printk with appropriate display macro
  mmc: core: Add default timeout value for CMD6
  mmc: sdhci-pci: add runtime pm support
  ...
2011-10-28 14:16:11 -07:00
Seungwon Jeon 336c716ae2 mmc: core: Cleanup eMMC4.5 conditionals
Code cleanup, putting all eMMC 4.5 detection cases together.
This patch removes one if-statement and assembles all. And it also
removes variable initialization below else-statement -- all members
of card structure are already set to zero at card-init.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-27 09:11:33 -04:00
Paul Walmsley 9b68256cde mmc: omap_hsmmc: if multiblock reads are broken, disable them
When device data indicates that multiple block reads are not supported
on a given HSMMC controller instance, log a message to the console, and
pass the appropriate MMC capability flag to the MMC core.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Dave Hylands <dhylands@gmail.com>
Tested-by: Steve Sakoman <sakoman@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-27 09:11:28 -04:00
Paul Walmsley 2bf22b3982 mmc: core: add workaround for controllers with broken multiblock reads
Due to hardware bugs, some MMC host controllers don't support
multiple-block reads[1].  To resolve, add a new MMC capability flag,
MMC_CAP2_NO_MULTI_READ, which can be set by affected host controller
drivers.  When this capability is set, all reads will be issued one
sector at a time.

1. See for example Advisory 2.1.1.128 "MMC: Multiple Block Read
Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_
Revision F (October 2010) (SPRZ278F), available from
http://focus.ti.com/lit/er/sprz278f/sprz278f.pdf

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Dave Hylands <dhylands@gmail.com>
Tested-by: Steve Sakoman <sakoman@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-27 09:10:57 -04:00
Linus Torvalds 18974369cf Merge branch 'clk' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm
* 'clk' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm:
  ARM: 7131/1: clkdev: Add Common Macro for clk_lookup
  clk: spi-pl022: convert to clk_prepare()/clk_unprepare()
  clk: timer-sp: convert to clk_prepare()/clk_unprepare()
  clk: sa1111: convert to clk_prepare()/clk_unprepare()
  clk: mmci: convert to clk_prepare()/clk_unprepare()
  clk: amba-pl011: convert to clk_prepare()/clk_unprepare()
  clk: amba-pl010: convert to clk_prepare()/clk_unprepare()
  clk: amba-clcd: convert to clk_prepare()/clk_unprepare()
  clk: amba bus: convert to clk_prepare()/clk_unprepare()
  clk: provide prepare/unprepare functions
2011-10-27 08:41:50 +02:00
Linus Torvalds 7e0a6fd5a4 Merge branch 'amba' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm
* 'amba' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm:
  ARM: 7079/1: spi: Fix builderror in spi-pl022.c
  PM: add runtime PM support to MMCI
  PM: add runtime PM support to core Primecell driver
2011-10-27 08:40:50 +02:00
Linus Torvalds ca90666287 Merge branch 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm
* 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits)
  ARM: 7135/1: ep93xx: bring back missing <mach/gpio.h>
  ARM: 7104/1: plat-pxa: break out GPIO driver specifics
  ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem
  ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics
  ARM: 7101/1: arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h>
  ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h
  ARM: 7083/1: rewrite U300 GPIO to use gpiolib
  ARM: 7074/1: gpio: davinci: eliminate unused variable warnings
  ARM: 7063/1: Orion: gpio: add missing include of linux/types.h
  ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build
  ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio
  ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq
  ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio
  ARM: 7057/1: mach-pnx4008: rename GPIO header
  ARM: 7056/1: plat-nomadik: kill off <plat/gpio.h>
  ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function
  ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem
  ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics
  ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem
  ARM: 7043/1: mach-ixp2000: rename GPIO header
  ...

Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually
2011-10-27 08:39:10 +02:00
Ulf Hansson b6ad726e3f mmc: core: Prevent too long response times for suspend
While trying to suspend the mmc host there could still be
ongoing requests that we need to wait for. At the same time
a device driver must respond to a suspend request rather quickly.

Instead of potentially wait "forever" by claiming the host we now
"try" to claim the host instead. If it fails, -EBUSY is returned.

Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Reviewed-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:31 -04:00
Bing Zhao b4625dab2c mmc: recognise SDIO cards with SDIO_CCCR_REV 3.00
Table 6-2: CCCR bit Definitions, address 00h.  Part E1 SDIO Simplified
Specification Version 3.00, Feb. 25, 2011.

This patch has been tested with Marvell WLAN device SD8797.

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:31 -04:00
Subhash Jadavani f2815f68da mmc: sd: Handle SD3.0 cards not supporting UHS-I bus speed mode
Here is Essential conditions to indicate Version 3.00 Card
(SD_SPEC=2 and SD_SPEC3=1) :
(1) The card shall support CMD6
(2) The card shall support CMD8
(3) The card shall support CMD42
(4) User area capacity shall be up to 2GB (SDSC) or 32GB (SDHC)
    User area capacity shall be more than or equal to 32GB and
    up to 2TB (SDXC)
(5) Speed Class shall be supported (SDHC or SDXC)

So even if SD card doesn't support any of the newly defined
UHS-I bus speed mode, it can advertise itself as SD3.0 cards
as long as it supports all the essential conditions of
SD3.0 cards. Given this, these type of cards should atleast
run in High Speed mode @50MHZ if it supports HS.

But current initialization sequence for SD3.0 cards is
such that these non-UHS-I SD3.0 cards runs in Default
Speed mode @25MHz.

This patch makes sure that these non-UHS-I SD3.0 cards run
in High Speed Mode @50MHz.

Tested this patch with SanDisk Extreme SDHC 8GB Class 10 card.

Reported-by: "Hiremath, Vaibhav" <hvaibhav@ti.com>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:30 -04:00
Jaehoon Chung eb0d8f135b mmc: core: support HPI send command
HPI command is defined in eMMC4.41.
This feature is important for eMMC4.5 devices.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:29 -04:00
Seungwon Jeon 881d1c25f7 mmc: core: Add cache control for eMMC4.5 device
This patch adds cache feature of eMMC4.5 Spec.
If device supports cache capability, host can utilize some specific
operations.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:28 -04:00
Seungwon Jeon 71fe3eb0d0 mmc: core: Modify the timeout value for writing power class
This patch will apply the generic CMD6 timeout to switch command
for power class.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:28 -04:00
Kyungmin Park b3bf915308 mmc: core: new discard feature support at eMMC v4.5
MMC v4.5 supports the DISCARD feature (CMD38).  It's different from
trim and there's no check bit.  Currently it's only supported at v4.5.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:27 -04:00
Kyungmin Park d9ddd62943 mmc: core: mmc sanitize feature support for v4.5
In the v4.5, there's no secure erase & trim support.
Instead it supports the sanitize feature.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:26 -04:00
Jaehoon Chung 4e0a5adf46 mmc: dw_mmc: modify DATA register offset
In dw_mmc 2.40a spec, Data register's offset is changed.
Before we used Data register offset 0x100. but if somebody uses a
2.40a controller, we must use 0x200 for Data register.

This patch adds a version-id checking point and uses SDMMC_DATA(x)
instead of SDMMC_DATA.  It assumes 2.40a is the latest version.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:25 -04:00
Adrian Hunter c43fd77466 mmc: sdhci-pci: add flag for devices that can support runtime PM
Only allow runtime PM for devices that specifically indicate
that they support it.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:25 -04:00
Adrian Hunter e840ce134b mmc: omap_hsmmc: ensure pbias configuration is always done
Go through the driver's set_power() functions rather than
calling regulator_enable/disable() directly because otherwise
pbias configuration for MMC1 is not done.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Acked-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:24 -04:00
Girish K S bec8726abc mmc: core: Add Power Off Notify Feature eMMC 4.5
This patch adds support for the power off notify feature, available in
eMMC 4.5 devices. If the host has support for this feature, then the
mmc core will notify the device by setting the POWER_OFF_NOTIFICATION
byte in the extended csd register with a value of 1 (POWER_ON).

For suspend mode short timeout is used, whereas for the normal poweroff
long timeout is used.

Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:23 -04:00
Jaehoon Chung 326adda53a mmc: sdhci-s3c: fix potential NULL dereference
sc->clk_bus[ptr] could be NULL.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:22 -04:00
Girish K S a3c76eb9d4 mmc: replace printk with appropriate display macro
All the files using printk function for displaying kernel messages
in the mmc driver have been replaced with corresponding macro.

Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:22 -04:00
Seungwon Jeon b23cf0bd55 mmc: core: Add default timeout value for CMD6
EXT_CSD[248] includes the default maximum timeout for CMD6.
This field is added at eMMC4.5 Spec. And it can be used for default
timeout except for some operations which don't define the timeout
(i.e. background operation, sanitize, flush cache) in eMMC4.5 Spec.

Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:21 -04:00
Adrian Hunter 66fd8ad510 mmc: sdhci-pci: add runtime pm support
Ths patch allows runtime PM for sdhci-pci, runtime suspending after
inactivity of 50ms and ensuring runtime resume before SDHC registers
are accessed.  During runtime suspend, interrupts are masked.
The host controller state is restored at runtime resume.

For Medfield, the host controller's card detect mechanism is
supplanted by an always-on GPIO which provides for card detect wake-up.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:20 -04:00
Adrian Hunter 08a7e1dfaa mmc: core: move ->request() call from atomic context
mmc_request_done() is sometimes called from interrupt or other atomic
context.  Mostly all mmc_request_done() does is complete(), however it
contains code to retry on error, which uses ->request().  As the error
path is certainly not performance critical, this may be moved to the
waiting function mmc_wait_for_req_done().

This allows ->request() to use runtime PM get_sync() and guarantee it
is never in an atomic context.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ulf Hansson <ulf.hansson@stericsson.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:19 -04:00
Paul Gortmaker 88b4767974 mmc: Add module.h to drivers/mmc users assuming implicit presence.
We are cleaning up the implicit presence of module.h; these guys are
some of the people who just assume it will be there.  Call it out
explitly for those that really need it.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:19 -04:00
Stephen Rothwell 3f102ae926 mmc: using module_param requires the inclusion of moduleparam.h
Commit "mmc: add module param to set fault injection attributes" adds
a module_param to this file.  But it is relying on the old implicit
"module.h is everywhere" behaviour, and without the explicit include
of moduleparam.h, the pending module.h split up produces this error:

core/debugfs.c:28:35: error: expected ')' before numeric constant

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:18 -04:00
Namjae Jeon e0c368d571 mmc: core: general purpose MMC partition support.
It allows gerneral purpose partitions in MMC Device.  And I try to simply
make mmc_blk_alloc_parts using mmc_part structure suggested by Andrei
Warkentin.  After patching, we see general purpose partitions like this:
> cat /proc/partitions
          179 0 847872 mmcblk0
          179 192 4096 mmcblk0gp3
          179 160 4096 mmcblk0gp2
          179 128 4096 mmcblk0gp1
          179 96  1052672 mmcblk0gp0
          179 64  1024 mmcblk0boot1
          179 32  1024 mmcblk0boot0

Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Acked-by: Andrei Warkentin <awarkentin@vmware.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:17 -04:00
Andrei Warkentin 5238acbe36 mmc: core: ext_csd.raw_* used in comparison but never set
f39b2dd9d ("mmc: core: Bus width testing needs to handle suspend/resume")
added code to only compare read-only ext_csd fields in bus width testing
code, yet it's comparing some fields that are never set.

The affected fields are ext_csd.raw_erased_mem_count and
ext_csd.raw_partition_support.

Signed-off-by: Andrei Warkentin <andrey.warkentin@gmail.com>
Acked-by: Philip Rakity <prakity@marvell.com>
Cc: <stable@kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-26 16:32:16 -04:00