Enable uverbs_destroy_def_handler to be used by drivers and replace
current code to use it.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Extend the existing grh_required flag to check when AV's are handled that
a GRH is present.
Since we don't want to do query_port during the AV checks for performance
reasons move the flag into the immutable_data.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The internal flag IP_BASED_GIDS was added to a field that was being used
to hold the port Info CapabilityMask without considering the effects this
will have. Since most drivers just use the value from the HW MAD it means
IP_BASED_GIDS will also become set on any HW that sets the IBA flag
IsOtherLocalChangesNoticeSupported - which is not intended.
Fix this by keeping port_cap_flags only for the IBA CapabilityMask value
and store unrelated flags externally. Move the bit definitions for this to
ib_mad.h to make it clear what is happening.
To keep the uAPI unchanged define a new set of flags in the uapi header
that are only used by ib_uverbs_query_port_resp.port_cap_flags which match
the current flags supported in rdma-core, and the values exposed by the
current kernel.
Fixes: b4a26a2728 ("IB: Report using RoCE IP based gids in port caps")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The only purpose for this structure was to hold the ib_uobject_file
pointer, but now that is part of the standard ib_uobject the structure
no longer makes any sense, so get rid of it.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The IDR is part of the ib_ufile so all the machinery to lock it, handle
closing and disassociation rightly belongs to the ufile not the ucontext.
This changes the lifetime of that data to match the lifetime of the file
descriptor which is always strictly longer than the lifetime of the
ucontext.
We need the entire locking machinery to continue to exist after ucontext
destruction to allow us to return the destroy data after a device has been
disassociated.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The specs are required to operate the uverbs file, so they belong inside
the ib_uverbs_device, not inside the ib_device. The spec passed in the
ib_device is just a communication from the driver and should not be used
during runtime.
This also changes the lifetime of the spec memory to match the
ib_uverbs_device, however at this time the spec_root can still contain
driver pointers after disassociation, so it cannot be used if ib_dev is
NULL. This is preparation for another series.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Improve uverbs_cleanup_ucontext algorithm to work properly when the
topology graph of the objects cannot be determined at compile time. This
is the case with objects created via the devx interface in mlx5.
Typically uverbs objects must be created in a strict topologically sorted
order, so that LIFO ordering will generally cause them to be freed
properly. There are only a few cases (eg memory windows) where objects can
point to things out of the strict LIFO order.
Instead of using an explicit ordering scheme where the HW destroy is not
allowed to fail, go over the list multiple times and allow the destroy
function to fail. If progress halts then a final, desperate, cleanup is
done before leaking the memory. This indicates a driver bug.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Following the removal of ib_create_flow(), adjust the code to get rid of
ib_destroy_flow() too.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
There are no kernel users of this interface so lets drop it.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The work completion is inspected to determine what dgid table entry was
used to receieve the packet, produces a sgid_attr that matches and sticks
it in the ah_attr.
All callers of this function are now required to release the ah_attr on
success.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Drivers that use the IOCTL API may have the ib_uverbs_file and need a
way to get the related ib_ucontext from it, this is enabled by this
patch.
Downstream patches from this series will use it.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This patch replaces the ib_device_attr.max_sge with max_send_sge and
max_recv_sge. It allows ulps to take advantage of devices that have very
different send and recv sge depths. For example cxgb4 has a max_recv_sge
of 4, yet a max_send_sge of 16. Splitting out these attributes allows
much more efficient use of the SQ for cxgb4 with ulps that use the RDMA_RW
API. Consider a large RDMA WRITE that has 16 scattergather entries.
With max_sge of 4, the ulp would send 4 WRITE WRs, but with max_sge of
16, it can be done with 1 WRITE WR.
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
If the AH has a GRH then hold a reference to the sgid_attr inside the
common struct.
If the QP is modified with an AV that includes a GRH then also hold a
reference to the sgid_attr inside the common struct.
This informs the cache that the sgid_index is in-use so long as the AH or
QP using it exists.
This also means that all drivers can access the sgid_attr directly from
the ah_attr instead of querying the cache during their UD post-send paths.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The core code now ensures that all driver callbacks that receive an
rdma_ah_attrs will have a sgid_attr's pointer if there is a GRH present.
Drivers can use this pointer instead of calling a query function with
sgid_index. This simplifies the drivers and also avoids races where a
gid_index lookup may return different data if it is changed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Introduce AH attribute copy, move and replace APIs to be used by core and
provider drivers.
In CM code flow when ah attribute might be re-initialized twice while
processing incoming request, or initialized once while from path record
while sending out CM requests. Therefore use rdma_move_ah_attr API to
handle such scenarios instead of memcpy().
Provider drivers keeps a copy ah_attr during the lifetime of the ah.
Therefore, use rdma_replace_ah_attr() which conditionally release
reference to old ah_attr and holds reference to new attribute whose
referrence is released when the AH is freed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The sgid_attr will ultimately replace the sgid_index in the ah_attr.
This will allow for all layers to have a consistent view of what
gid table entry was selected as processing runs through all stages of the
stack.
This commit introduces the pointer and ensures it is set before calling
any driver callback that includes a struct ah_attr callback, allowing
future patches to adjust both the drivers and the callers to use
sgid_attr instead of sgid_index.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
If the gid_attr argument is NULL then the functions behave identically to
rdma_query_gid. ib_query_gid just calls ib_get_cached_gid, so everything
can be consolidated to one function.
Now that all callers either use rdma_query_gid() or ib_get_cached_gid(),
ib_query_gid() API is removed.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that ib_gid_attr contains the GID, make use of that in the add_gid()
callback functions for the provider drivers to simplify the add_gid()
implementations.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In order to be able to expose pointers to the ib_gid_attrs in the GID
table we need to make it so the value of the pointer cannot be
changed. Thus each GID table entry gets a unique piece of kref'd memory
that is written only during initialization and remains constant for its
lifetime.
This eventually will allow the struct ib_gid_attrs to be returned without
copy from many of query the APIs, but it also provides a way to track when
all users of a HW table index go away.
For roce we no longer allow an in-use HW table index to be re-used for a
new an different entry. When a GID table entry needs to be removed it is
hidden from the find API, but remains as a valid HW index and all
ib_gid_attr points remain valid. The HW index is not relased until all
users put the kref.
Later patches will broadly replace the use of the sgid_index integer with
the kref'd structure.
Ultimately this will prevent security problems where the OS changes the
properties of a HW GID table entry while an active user object is still
using the entry.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The flows were hidden from the C compiler; expose them as a zero-length
array to allow struct_size to work.
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
T10-PI offload capability is currently supported in iSER protocol only,
and the definition of the HCA protection information checks are missing
from the core layer. Add those definition to avoid code duplication in
other drivers (such iSER target and NVMeoF).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This series comes to allow user space applications to monitor real time
traffic activity and events of the verbs objects it manages, e.g.:
ibv_qp, ibv_wq, ibv_flow.
This API enables generic counters creation and define mapping
to association with a verbs object, current mlx5 driver using
this API for flow counters.
With this API, an application can monitor the entire life cycle of
object activity, defined here as a static counters attachment.
This API also allows dynamic counters monitoring of measurement points
for a partial period in the verbs object life cycle.
In addition it presents the implementation of the generic counters interface.
This will be achieved by extending flow creation by adding a new flow count
specification type which allows the user to associate a previously created
flow counters using the generic verbs counters interface to the created flow,
once associated the user could read statistics by using the read function of
the generic counters interface.
The API includes:
1. create and destroyed API of a new counters objects
2. read the counters values from HW
Note:
Attaching API to allow application to define the measurement points per objects
is a user space only API and this data is passed to kernel when the counted
object (e.g. flow) is created with the counters object.
-----BEGIN PGP SIGNATURE-----
iHQEABYIAB0WIQT1m3YD37UfMCUQBNwp8NhrnBAZsQUCWxIiqQAKCRAp8NhrnBAZ
sWJRAPYl06nEfQjRlW//ZE/pO2oKXbfEevg7nnbpe80ERlxLAQDA2LHAcU7ma/NC
hS5yxIq1gLSA27N+5qAoFVK8vJ5ZCg==
=EiAV
-----END PGP SIGNATURE-----
Merge tag 'verbs_flow_counters' of git://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma.git into for-next
Pull verbs counters series from Leon Romanovsky:
====================
Verbs flow counters support
This series comes to allow user space applications to monitor real time
traffic activity and events of the verbs objects it manages, e.g.: ibv_qp,
ibv_wq, ibv_flow.
The API enables generic counters creation and define mapping to
association with a verbs object, the current mlx5 driver is using this API
for flow counters.
With this API, an application can monitor the entire life cycle of object
activity, defined here as a static counters attachment. This API also
allows dynamic counters monitoring of measurement points for a partial
period in the verbs object life cycle.
In addition it presents the implementation of the generic counters
interface.
This will be achieved by extending flow creation by adding a new flow
count specification type which allows the user to associate a previously
created flow counters using the generic verbs counters interface to the
created flow, once associated the user could read statistics by using the
read function of the generic counters interface.
The API includes:
1. create and destroyed API of a new counters objects
2. read the counters values from HW
Note:
Attaching API to allow application to define the measurement points per
objects is a user space only API and this data is passed to kernel when
the counted object (e.g. flow) is created with the counters object.
===================
* tag 'verbs_flow_counters':
IB/mlx5: Add counters read support
IB/mlx5: Add flow counters read support
IB/mlx5: Add flow counters binding support
IB/mlx5: Add counters create and destroy support
IB/uverbs: Add support for flow counters
IB/core: Add support for flow counters
IB/core: Support passing uhw for create_flow
IB/uverbs: Add read counters support
IB/core: Introduce counters read verb
IB/uverbs: Add create/destroy counters support
IB/core: Introduce counters object and its create/destroy
IB/uverbs: Add an ib_uobject getter to ioctl() infrastructure
net/mlx5: Export flow counter related API
net/mlx5: Use flow counter pointer as input to the query function
A counters object could be attached to flow on creation by providing the
counter specification action.
General counters description which count packets and bytes are introduced,
downstream patches from this series will use them as part of flow counters
binding.
In addition, increase number of flow specifications supported layers to 10
upon adding count specification and for the previously added drop
specification.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This is required when user-space drivers need to pass extra information
regarding how to handle this flow steering specification.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The user supplies counters instance and a reference to an output array of
uint64_t. The driver reads the hardware counters values and writes them
to the output index location in the user supplied array. All counters
values are represented as uint64_t types.
To be able to successfully read the data the counters must be first bound
to an IB object.
Downstream patches will present binding method for flow counters.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A verbs application may need to get statistics and info on various aspects
of a verb object (e.g. Flow, QP, ...), in general case the application
will state which object's counters its interested in (we refer to this
action as attach), bind this new counters object to the appropriate verb
object and on later stage read their values using the counters object.
This series introduces a general API for counters object that may
accumulate any ib object counters type, bound and read on demand.
Counters instance is allocated on an IB context and belongs to that
context. Upon successful creation the counters can be bound to a verbs
object so that hardware counter instances can be created and read.
Downstream patches in this series will introduce the attach, bind and the
read functionality.
Counters instance can be de-allocated, upon successful destruction the
related hardware resources are released.
Prior to destroy call the user must first make sure that the counters is
not being used by any IB object, e.g. not attached to any of its counted
type otherwise an EBUSY error is invoked.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Update mlx4 to support user MR creation against read-only memory, previously
it required the memory to be writable.
Based on rdma for-rc due to dependencies.
* mr_fix: (2 commits)
IB/mlx4: Mark user MR as writable if actual virtual memory is writable
IB/core: Make testing MR flags for writability a static inline function
Make the MR writability flags check, which is performed in umem.c,
a static inline function in file ib_verbs.h
This allows the function to be used by low-level infiniband drivers.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Add a new MPLS steering match filter that can match against
a single MPLS tag field.
Since the MPLS header can reside in different locations in the packet's
protocol stack as well as be encapsulated with a tunnel protocol, it
is required to know the exact location of the header in the protocol
stack.
Therefore, when including the MPLS protocol spec in the specs list,
it is mandatory to provide the list in an ordered manner, so
that it represents the actual header order in a matching packet.
Drivers that process the spec list and apply the matching rule
should treat the position of the MPLS spec in the spec list as the
actual location of the MPLS label in the packet's protocol stack.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adding a new GRE steering match filter that can match against
key and protocol fields.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
- Fix RDMA uapi headers to actually compile in userspace and be more
complete
- Three shared with netdev pull requests from Mellanox:
* 7 patches, mostly to net with 1 IB related one at the back). This
series addresses an IRQ performance issue (patch 1), cleanups related to
the fix for the IRQ performance problem (patches 2-6), and then extends
the fragmented completion queue support that already exists in the net
side of the driver to the ib side of the driver (patch 7).
* Mostly IB, with 5 patches to net that are needed to support the remaining
10 patches to the IB subsystem. This series extends the current
'representor' framework when the mlx5 driver is in switchdev mode from
being a netdev only construct to being a netdev/IB dev construct. The IB
dev is limited to raw Eth queue pairs only, but by having an IB dev of
this type attached to the representor for a switchdev port, it enables
DPDK to work on the switchdev device.
* All net related, but needed as infrastructure for the rdma driver
- Updates for the hns, i40iw, bnxt_re, cxgb3, cxgb4, hns drivers
- SRP performance updates
- IB uverbs write path cleanup patch series from Leon
- Add RDMA_CM support to ib_srpt. This is disabled by default. Users need to
set the port for ib_srpt to listen on in configfs in order for it to be
enabled (/sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port)
- TSO and Scatter FCS support in mlx4
- Refactor of modify_qp routine to resolve problems seen while working on new
code that is forthcoming
- More refactoring and updates of RDMA CM for containers support from Parav
- mlx5 'fine grained packet pacing', 'ipsec offload' and 'device memory'
user API features
- Infrastructure updates for the new IOCTL interface, based on increased usage
- ABI compatibility bug fixes to fully support 32 bit userspace on 64 bit
kernel as was originally intended. See the commit messages for
extensive details
- Syzkaller bugs and code cleanups motivated by them
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Ku8g
-----END PGP SIGNATURE-----
Merge tag 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Doug and I are at a conference next week so if another PR is sent I
expect it to only be bug fixes. Parav noted yesterday that there are
some fringe case behavior changes in his work that he would like to
fix, and I see that Intel has a number of rc looking patches for HFI1
they posted yesterday.
Parav is again the biggest contributor by patch count with his ongoing
work to enable container support in the RDMA stack, followed by Leon
doing syzkaller inspired cleanups, though most of the actual fixing
went to RC.
There is one uncomfortable series here fixing the user ABI to actually
work as intended in 32 bit mode. There are lots of notes in the commit
messages, but the basic summary is we don't think there is an actual
32 bit kernel user of drivers/infiniband for several good reasons.
However we are seeing people want to use a 32 bit user space with 64
bit kernel, which didn't completely work today. So in fixing it we
required a 32 bit rxe user to upgrade their userspace. rxe users are
still already quite rare and we think a 32 bit one is non-existing.
- Fix RDMA uapi headers to actually compile in userspace and be more
complete
- Three shared with netdev pull requests from Mellanox:
* 7 patches, mostly to net with 1 IB related one at the back).
This series addresses an IRQ performance issue (patch 1),
cleanups related to the fix for the IRQ performance problem
(patches 2-6), and then extends the fragmented completion queue
support that already exists in the net side of the driver to the
ib side of the driver (patch 7).
* Mostly IB, with 5 patches to net that are needed to support the
remaining 10 patches to the IB subsystem. This series extends
the current 'representor' framework when the mlx5 driver is in
switchdev mode from being a netdev only construct to being a
netdev/IB dev construct. The IB dev is limited to raw Eth queue
pairs only, but by having an IB dev of this type attached to the
representor for a switchdev port, it enables DPDK to work on the
switchdev device.
* All net related, but needed as infrastructure for the rdma
driver
- Updates for the hns, i40iw, bnxt_re, cxgb3, cxgb4, hns drivers
- SRP performance updates
- IB uverbs write path cleanup patch series from Leon
- Add RDMA_CM support to ib_srpt. This is disabled by default. Users
need to set the port for ib_srpt to listen on in configfs in order
for it to be enabled
(/sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port)
- TSO and Scatter FCS support in mlx4
- Refactor of modify_qp routine to resolve problems seen while
working on new code that is forthcoming
- More refactoring and updates of RDMA CM for containers support from
Parav
- mlx5 'fine grained packet pacing', 'ipsec offload' and 'device
memory' user API features
- Infrastructure updates for the new IOCTL interface, based on
increased usage
- ABI compatibility bug fixes to fully support 32 bit userspace on 64
bit kernel as was originally intended. See the commit messages for
extensive details
- Syzkaller bugs and code cleanups motivated by them"
* tag 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (199 commits)
IB/rxe: Fix for oops in rxe_register_device on ppc64le arch
IB/mlx5: Device memory mr registration support
net/mlx5: Mkey creation command adjustments
IB/mlx5: Device memory support in mlx5_ib
net/mlx5: Query device memory capabilities
IB/uverbs: Add device memory registration ioctl support
IB/uverbs: Add alloc/free dm uverbs ioctl support
IB/uverbs: Add device memory capabilities reporting
IB/uverbs: Expose device memory capabilities to user
RDMA/qedr: Fix wmb usage in qedr
IB/rxe: Removed GID add/del dummy routines
RDMA/qedr: Zero stack memory before copying to user space
IB/mlx5: Add ability to hash by IPSEC_SPI when creating a TIR
IB/mlx5: Add information for querying IPsec capabilities
IB/mlx5: Add IPsec support for egress and ingress
{net,IB}/mlx5: Add ipsec helper
IB/mlx5: Add modify_flow_action_esp verb
IB/mlx5: Add implementation for create and destroy action_xfrm
IB/uverbs: Introduce ESP steering match filter
IB/uverbs: Add modify ESP flow_action
...
Adding new ioctl method for the MR object - REG_DM_MR.
This command can be used by users to register an allocated
device memory buffer as an MR and receive lkey and rkey
to be used within work requests.
It is added as a new method under the MR object and using a new
ib_device callback - reg_dm_mr.
The command creates a standard ib_mr object which represents the
registered memory.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This change adds uverbs support for allocation/freeing
of device memory commands.
A new uverbs object is defined of type idr to represent
and track the new resource type allocation per context.
The API requires provider driver to implement 2 new ib_device
callbacks - one for allocation and one for deallocation which
return and accept (respectively) the ib_dm object which represents
the allocated memory on the device.
The support is added via the ioctl command infrastructure
only.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
This change allows vendors to report device memory capability
max_dm_size - to user via uverbs command.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Adding a new ESP steering match filter that could match against
spi and seq used in IPSec protocol.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
flow_actions of ESP type could be modified during runtime. This could be
common for example when ESN should be changed. Adding a new
UVERBS_FLOW_ACTION_ESP_MODIFY method for changing ESP parameters of an
existing ESP flow_action.
The new method uses the UVERBS_FLOW_ACTION_ESP_CREATE attributes, but
adds a new IB_FLOW_ACTION_ESP_FLAGS_MOD_ESP_ATTRS which means ESP_ATTRS
should be changed.
In addition, we add a new FLOW_ACTION_ESP_REPLAY_NONE replay type that
could be used when one wants to disable a replay protection over a
specific flow_action.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The egress flag indicates that this flow steering rule is for egress
traffic. The scope of an egress rule is port-wide, meaning all packets
originated from that port, which match the steering rule specification
will be effected by this steering rule's action.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Binding a flow_action to flow steering rule requires using a new
specification. Therefore, adding such an IB_FLOW_SPEC_ACTION_HANDLE flow
specification.
Flow steering rules could use flow_action(s) and as of that we need to
avoid deleting flow_action(s) as long as they're being used.
Moreover, when the attached rules are deleted, action_handle reference
count should be decremented. Introducing a new mechanism of flow
resources to keep track on the attached action_handle(s). Later on, this
mechanism should be extended to other attached flow steering resources
like flow counters.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
A verbs application may receive and transmits packets using a data
path pipeline. Sometimes, the first stage in the receive pipeline or
the last stage in the transmit pipeline involves transforming a
packet, either in order to make it easier for later stages to process
it or to prepare it for transmission over the wire. Such transformation
could be stripping/encapsulating the packet (i.e. vxlan),
decrypting/encrypting it (i.e. ipsec), altering headers, doing some
complex FPGA changes, etc.
Some hardware could do such transformations without software data path
intervention at all. The flow steering API supports steering a
packet (either to a QP or dropping it) and some simple packet
immutable actions (i.e. tagging a packet). Complex actions, that may
change the packet, could bloat the flow steering API extensively.
Sometimes the same action should be applied to several flows.
In this case, it's easier to bind several flows to the same action and
modify it than change all matching flows.
Introducing a new flow_action object that abstracts any packet
transformation (out of a standard and well defined set of actions).
This flow_action object could be tied to a flow steering rule via a
new specification.
Currently, we support esp flow_action, which encrypts or decrypts a
packet according to the given parameters. However, we present a
flexible schema that could be used to other transformation actions tied
to flow rules.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Now that ib_gid_attr contains device, port and index, simplify the
provider APIs add_gid() and del_gid() to use device, port and index
fields from the ib_gid_attr attributes structure.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Code is refactored to prepare separate functions for RoCE which can do more
complex operations related to reference counting, while still
maintainining code readability. This includes
(a) Simplification to not perform netdevice checks and modifications
for IB link layer.
(b) Do not add RoCE GID entry which has NULL netdevice; instead return
an error.
(c) If GID addition fails at provider level add_gid(), do not add the
entry in the cache and keep the entry marked as INVALID.
(d) Simplify and reuse the ib_cache_gid_add()/del() routines so that they
can be used even for modifying default GIDs. This avoid some code
duplication in modifying default GIDs.
(e) find_gid() routine refers to the data entry flags to qualify a GID
as valid or invalid GID rather than depending on attributes and zeroness
of the GID content.
(f) gid_table_reserve_default() sets the GID default attribute at
beginning while setting up the GID table. There is no need to use
default_gid flag in low level functions such as write_gid(), add_gid(),
del_gid(), as they never need to update the DEFAULT property of the GID
entry while during GID table update.
As as result of this refactor, reserved GID 0:0:0:0:0:0:0:0 is no longer
searchable as described below.
A unicast GID entry of 0:0:0:0:0:0:0:0 is Reserved GID as per the IB
spec version 1.3 section 4.1.1, point (6) whose snippet is below.
"The unicast GID address 0:0:0:0:0:0:0:0 is reserved - referred to as
the Reserved GID. It shall never be assigned to any endport. It shall
not be used as a destination address or in a global routing header
(GRH)."
GID table cache now only stores valid GID entries. Before this patch,
Reserved GID 0:0:0:0:0:0:0:0 was searchable in the GID table using
ib_find_cached_gid_by_port() and other similar find routines.
Zero GID is no longer searchable as it shall not to be present in GRH or
path recored entry as described in IB spec version 1.3 section 4.1.1,
point (6), section 12.7.10 and section 12.7.20.
ib_cache_update() is simplified to check link layer once, use unified
locking scheme for all link layers, removed temporary gid table
allocation/free logic.
Additionally,
(a) Expand ib_gid_attr to store port and index so that GID query
routines can get port and index information from the attribute structure.
(b) Expand ib_gid_attr to store device as well so that in future code when
GID reference counting is done, device is used to reach back to the GID
table entry.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
query_gid() should return right GID value for iWarp and IB link layers.
It is a no-op for RoCE link layer. Update the documentation to reflect
this.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Currently access to hardware stats buffer isn't protected, this can
result in multiple writes and reads at the same time to the same
memory location. This can lead to providing an incorrect value to
the user. Add a mutex to protect against it.
Fixes: b40f4757da ("IB/core: Make device counter infrastructure dynamic")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Last user is gone after bdf5bd7f21 "rds: tcp: remove
register_netdevice_notifier infrastructure.", so we can
remove this netdevice command. This allows to delete
rtnl_lock() in netdev_run_todo(), which is hot path for
net namespace unregistration.
dev_change_net_namespace() and netdev_wait_allrefs()
have rcu_barrier() before NETDEV_UNREGISTER_FINAL call,
and the source commits say they were introduced to
delemit the call with NETDEV_UNREGISTER, but this patch
leaves them on the places, since they require additional
analysis, whether we need in them for something else.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, we've used UVERBS_ATTR_SPEC_F_MIN_SZ for extending existing
attributes. The behavior of this flag was the kernel accepts anything
bigger than the minimum size it specified. This is unsafe, since in
order to safely extend an attribute, we need to make sure unknown size
is zeroed. Replacing UVERBS_ATTR_SPEC_F_MIN_SZ with
UVERBS_ATTR_SPEC_F_MIN_SZ_OR_ZERO, which essentially checks that the
unknown size is zero. In addition, attributes are now decorated with
UVERBS_ATTR_TYPE and UVERBS_ATTR_STRUCT, so we can provide the minimum
and known length.
Users of this flag needs to use copy_from_or_zero functions/macros.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Extending uverbs_ioctl header with driver_id and another reserved
field. driver_id should be used in order to identify the driver.
Since every driver could have its own parsing tree, this is necessary
for strace support.
Downstream patches take off the EXPERIMENTAL flag from the ioctl() IB
support and thus we add some reserved fields for future usage.
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
XRCD object is not implemented in the restrack, so lets remove it.
Fixes: 02d8883f52 ("RDMA/restrack: Add general infrastructure to track RDMA resources")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ib_peek_cq() verb doesn't seem be implemented in current code.
There is some past reference to it at [1] about it being unimplemented.
Lot of user documentation created out of kdoc refers to this
unimplemented API. Therefore, remove unimplemented API.
[1] http://lists.openfabrics.org/pipermail/ofw/2008-May/002465.html
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
ib_find_gid() is only used by IPoIB driver. For IB link layer, GID table
entries are not based on netdevice. Netdevice parameter is unused here.
Therefore, it is removed.
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
All callers to ib_modify_qp_is_ok() provides enum ib_qp_state
makes the checks of out-of-scope redundant. Let's remove them
together with updating function signature to return boolean result.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Yishai Hadas