Introduce a topology=[on|off] kernel parameter which allows to switch
cpu topology on/off. Default will be off, since it looks like that for
some workloards this doesn't behave very well (on s390).
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add the machine types for z9-bc, z10-ec and z10-bc to the elf_platform
detection in setup_hwcaps.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Early init code clears the backchain of the initial kernel stack frame.
This is not necessary since it is pre initialized with zeros. Plus it
was broken on 64 bit since it cleared only four of eight bytes.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This patch adds the code generation option for IBM System z10 and
adds a check in head[31,64].S to prevents the execution of a kernel
compiled for a new processor type on an old machine.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
A kernel compile on 31 bit gives the following warnings in ptrace.c:
arch/s390/kernel/ptrace.c: In function 'peek_user':
arch/s390/kernel/ptrace.c:207: warning: unused variable 'dummy'
arch/s390/kernel/ptrace.c: In function 'poke_user':
arch/s390/kernel/ptrace.c:315: warning: unused variable 'dummy'
Getting rid of the dummy variables removes the warnings.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This implements just the basic function tracer (_mcount) backend for s390.
The dynamic variant will come later.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
stfle will be needed by the ap_bus module to figure out wether the AP
queue adapter interruption facility is installed.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Since etr/stp don't need the old smp_call_function semantics anymore
we can convert s390 to the generic IPI infrastructure.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The work function dispatched with schedule_work() can be run twice
on different cpus because run_workqueue clears the WORK_STRUCT_PENDING
bit and then executes the function. Another cpu can call schedule_work()
again and run the work function a second time before the first call
is completed. This patch serialized the etr and stp work function with
a mutex.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This converts the etr and stp code to the new stop_machine interface
which allows to synchronize all cpus without allocating any memory.
This way we get rid of the only reason why we haven't converted s390
to the generic IPI interface yet.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add a vdso to speed up gettimeofday and clock_getres/clock_gettime for
CLOCK_REALTIME/CLOCK_MONOTONIC.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Call rebuild_sched_domains instead of arch_reinit_sched_domains if
cpu topology changes. This leaves cpu sets alone which otherwise would
be destroyed.
If and how it makes sense to define cpu sets on a virtualized
architecture is another question.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
On s390 we have ret_from_fork jump not to the "do all work we
normally do on return from syscall" as on x86, ppc, etc., but to the
"do all such work except audit". Historical reasons - the codepath
triggered when we have AUDIT process flag set is separated from the
normall one and they converge at sysc_return, which is the common
part of post-syscall work. And does not include calling audit_syscall_exit() -
that's done in the end of sysc_tracesys path, just before that path jumps
to sysc_return.
IOW, the child returning from fork()/clone()/vfork() doesn't
call audit_syscall_exit() at all, so no matter what we do with its
audit context, we are not going to see the audit entry.
The fix is simple: have ret_from_fork go to the point just past
the call of sys_.... in the 'we have AUDIT flag set' path. There we
have (64bit variant; for 31bit the situation is the same):
sysc_tracenogo:
tm __TI_flags+7(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
jz sysc_return
la %r2,SP_PTREGS(%r15) # load pt_regs
larl %r14,sysc_return # return point is sysc_return
jg do_syscall_trace_exit
which is precisely what we need - check the flag, bugger off to sysc_return
if not set, otherwise call do_syscall_trace_exit() and bugger off to
sysc_return. r9 has just been properly set by ret_from_fork itself,
so we are fine.
Tested on s390x, seems to work fine. WARNING: it's been about
16 years since my last contact with 3X0 assembler[1], so additional
review would be very welcome. I don't think I've managed to screw it
up, but...
[1] that *was* in another country and besides, the box is dead...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Common code doesn't call arch_update_cpu_topology() anymore on
cpu hotplug. But our architecture backend relied on that in order to
update the cpu_core_map. For machines without cpu topology support
this leads uninitialized cpu_core_maps for later on added cpus.
To solve this just initialize the maps with cpu_possible_map, since
that will be always valid for machines without topology support.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
We need an alignment of 16384 bytes for the initial kernel stack if
the kernel is configured for 16384 bytes stacks but the linker script
currently guarantees only an alignment of 8192 bytes.
So fix this and simply use THREAD_SIZE as alignment value which will
always do the right thing.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
CONFIG_PRINTK_TIME reveals that sched_clock has a wrong offset during boot:
..
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 775679
[ 0.000000] Kernel command line: dasd=4b6c root=/dev/dasda1 ro noinitrd
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[6920575.975232] console [ttyS0] enabled
[6920575.987586] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[6920575.991404] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
..
The s390 implementation of sched_clock uses the store clock instruction and
subtracts jiffies_timer_cc.
jiffies_timer_cc is a local variable in arch/s390/kernel/time.c and only used
for sched_clock and monotonic clock. For historical reasons there is an offset
on that value. With todays code this offset is unnecessary. By removing that
offset we can get a sched_clock which returns the nanoseconds after time_init.
This improves CONFIG_PRINTK_TIME.
Since sched_clock is the only user, I have also renamed jiffies_timer_cc to
sched_clock_base_cc. In addition, the local variable init_timer_cc is redundant
and can be romved as well.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
syscall_get_nr() currently returns a valid result only if the call
chain of the traced process includes do_syscall_trace_enter(). But
collect_syscall() can be called for any sleeping task, the result of
syscall_get_nr() in general is completely bogus.
To make syscall_get_nr() work for any sleeping task the traps field
in pt_regs is replace with svcnr - the system call number the process
is executing. If svcnr == 0 the process is not on a system call path.
The syscall_get_arguments and syscall_set_arguments use regs->gprs[2]
for the first system call parameter. This is incorrect since gprs[2]
may have been overwritten with the system call number if the call
chain includes do_syscall_trace_enter. Use regs->orig_gprs2 instead.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The uname system call for 64 bit compares current->personality without
masking the upper 16 bits. If e.g. READ_IMPLIES_EXEC is set the result
of a uname system call will always be s390x even if the process uses
the s390 personality.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
cpu_coregroup_map used to grab a mutex on s390 since it was only
called from process context.
Since c7c22e4d5c "block: add support
for IO CPU affinity" this is not true anymore.
It now also gets called from softirq context.
To prevent possible deadlocks change this in architecture code and
use a spinlock instead of a mutex.
Cc: stable@kernel.org
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
With CONFIG_IRQSOFF_TRACER the trace_hardirqs_off() function includes
a call to __builtin_return_address(1). But we calltrace_hardirqs_off()
from early entry code. There we have just a single stack frame.
So this results in a kernel stack backchain walk that would walk beyond
the kernel stack. Following the NULL terminated backchain this results
in a lowcore read access.
To fix this we simply call trace_hardirqs_off_caller() and pass the
current instruction pointer.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Disable tracing on idle psw. Otherwise it would give us huge
preempt off times for idle. Which is rather pointless.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
arch/s390/kernel/built-in.o: In function `cleanup_io_leave_insn':
mem_detect.c:(.text+0x10592): undefined reference to `lockdep_sys_exit'
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
add_active_range() expects start_pfn + size as end_pfn value, i.e. not
the pfn of the last page frame but the one behind that.
We used the pfn of the last page frame so far, which can lead to a
BUG_ON in move_freepages(), when the kernelcore parameter is specified
(page_zone(start_page) != page_zone(end_page)).
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Use sysdev_class_create_file() to create create sysdev class attributes
instead of sysfs_create_file(). Using sysfs_create_file() wasn't a very
good idea since the show and store functions have a different amount of
parameters for sysfs files and sysdev class files.
In particular the pointer to the buffer is the last argument and
therefore accesses to random memory regions happened.
Still worked surprisingly well until we got a kernel panic.
Cc: stable@kernel.org
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Nothing arch specific in get/settimeofday. The details of the timeval
conversion varied a little from arch to arch, but all with the same
results.
Also add an extern declaration for sys_tz to linux/time.h because externs
in .c files are fowned upon. I'll kill the externs in various other files
in a sparate patch.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David S. Miller <davem@davemloft.net> [ sparc bits ]
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
struct stat / compat_stat is the same on all architectures, so
cp_compat_stat should be, too.
Turns out it is, except that various architectures have slightly and some
high2lowuid/high2lowgid or the direct assignment instead of the
SET_UID/SET_GID that expands to the correct one anyway.
This patch replaces the arch-specific cp_compat_stat implementations with
a common one based on the x86-64 one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David S. Miller <davem@davemloft.net> [ sparc bits ]
Acked-by: Kyle McMartin <kyle@mcmartin.ca> [ parisc bits ]
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
chsc_sstpc returns -EIO on error and 0 on success but stp_reset checks
against 1 instead of 0. chsc_sstpc used to return 1 on success, one
call location has not been updated ..
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* System call parameter and result access functions
* Add tracehook calls
* Split syscall_trace into two functions do_syscall_trace_enter and
do_syscall_trace_exit
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
sys32_pause is a useless copy of the generic sys_pause.
(and it's certainly not there for old sparc32 binaries..)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This fixes a regression that came with 934b2857cc
("[S390] nohz/sclp: disable timer on synchronous waits.").
If udelay() gets called from a disabled context it sets the clock comparator
to a value where it expects the next interrupt. When the interrupt happens
the clock comparator gets not reset and therefore the interrupt condition
doesn't get cleared. The result is an endless timer interrupt loop.
In addition this patch fixes also the following:
rcutorture reveals that our __udelay implementation is still buggy,
since it might schedule tasklets, but prevents their execution:
NOHZ: local_softirq_pending 42
NOHZ: local_softirq_pending 02
NOHZ: local_softirq_pending 142
NOHZ: local_softirq_pending 02
To fix this we make sure that only the clock comparator interrupt
is enabled when the enabled wait psw is loaded.
Also no code gets called anymore which might schedule tasklets.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When running a 31-bit ptrace, on either an s390 or s390x kernel,
reads and writes into a padding area in struct user_regs_struct32
will result in a kernel panic.
This is also known as CVE-2008-1514.
Test case available here:
http://sources.redhat.com/cgi-bin/cvsweb.cgi/~checkout~/tests/ptrace-tests/tests/user-area-padding.c?cvsroot=systemtap
Steps to reproduce:
1) wget the above
2) gcc -o user-area-padding-31bit user-area-padding.c -Wall -ggdb2 -D_GNU_SOURCE -m31
3) ./user-area-padding-31bit
<panic>
Test status
-----------
Without patch, both s390 and s390x kernels panic. With patch, the test case,
as well as the gdb testsuite, pass without incident, padding area reads
returning zero, writes ignored.
Nb: original version returned -EINVAL on write attempts, which broke the
gdb test and made the test case slightly unhappy, Jan Kratochvil suggested
the change to return 0 on write attempts.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Tested-by: Jan Kratochvil <jan.kratochvil@redhat.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Right now, there is no notifier that is called on a new cpu, before the new
cpu begins processing interrupts/softirqs.
Various kernel function would need that notification, e.g. kvm works around
by calling smp_call_function_single(), rcu polls cpu_online_map.
The patch adds a CPU_STARTING notification. It also adds a helper function
that sends the message to all cpu_chain handlers.
Tested on x86-64.
All other archs are untested. Especially on sparc, I'm not sure if I got
it right.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Remove the now unneeded s390_idle.lock spinlock initialization after
Josef Sipek did it the right way in arch/s390/kernel/process.c.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Fix these two (false positive) warnings by adding an __init annoation:
WARNING: vmlinux.o(.text+0x7e6a): Section mismatch in reference from the function stp_reset() to the function .init.text:__alloc_bootmem()
The function stp_reset() references
the function __init __alloc_bootmem().
This is often because stp_reset lacks a __init
annotation or the annotation of __alloc_bootmem is wrong.
WARNING: vmlinux.o(.text+0x7ece): Section mismatch in reference from the function stp_reset() to the function .init.text:free_bootmem()
The function stp_reset() references
the function __init free_bootmem().
This is often because stp_reset lacks a __init
annotation or the annotation of free_bootmem is wrong.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The result of the diag 0x260 call is not always what one would expect.
So just remove it.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
During startup we check if diag308 works using diag 308 subcode 6,
which stores the actual ipl information. This fails with rc = 0x102, if
the system has been ipled from the HMC using load from CD or load from file.
In the case of rc = 0x102 we have to assume that diag 308 is working,
since it still can be used to ipl from an alternative device.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Now that it is safe to use get_online_cpus() we can revert
[S390] cpu topology: Fix possible deadlock.
commit: fd781fa25c
and call arch_reinit_sched_domains() directly from topology_work_fn().
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Max Krasnyansky <maxk@qualcomm.com>
Cc: Paul Jackson <pj@sgi.com>
Cc: Paul Menage <menage@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently list of kretprobe instances are stored in kretprobe object (as
used_instances,free_instances) and in kretprobe hash table. We have one
global kretprobe lock to serialise the access to these lists. This causes
only one kretprobe handler to execute at a time. Hence affects system
performance, particularly on SMP systems and when return probe is set on
lot of functions (like on all systemcalls).
Solution proposed here gives fine-grain locks that performs better on SMP
system compared to present kretprobe implementation.
Solution:
1) Instead of having one global lock to protect kretprobe instances
present in kretprobe object and kretprobe hash table. We will have
two locks, one lock for protecting kretprobe hash table and another
lock for kretporbe object.
2) We hold lock present in kretprobe object while we modify kretprobe
instance in kretprobe object and we hold per-hash-list lock while
modifying kretprobe instances present in that hash list. To prevent
deadlock, we never grab a per-hash-list lock while holding a kretprobe
lock.
3) We can remove used_instances from struct kretprobe, as we can
track used instances of kretprobe instances using kretprobe hash
table.
Time duration for kernel compilation ("make -j 8") on a 8-way ppc64 system
with return probes set on all systemcalls looks like this.
cacheline non-cacheline Un-patched kernel
aligned patch aligned patch
===============================================================================
real 9m46.784s 9m54.412s 10m2.450s
user 40m5.715s 40m7.142s 40m4.273s
sys 2m57.754s 2m58.583s 3m17.430s
===========================================================
Time duration for kernel compilation ("make -j 8) on the same system, when
kernel is not probed.
=========================
real 9m26.389s
user 40m8.775s
sys 2m7.283s
=========================
Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com>
Signed-off-by: Jim Keniston <jkenisto@us.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch enables virtio_console as the default console on kvm for
s390. We currently use the same notify hack as lguest for early
console output. I will try to address this for lguest and s390 later.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
nohz: adjust tick_nohz_stop_sched_tick() call of s390 as well
nohz: prevent tick stop outside of the idle loop
This allow to dynamically generate attributes and share show/store
functions between attributes. Right now most attributes are generated
by special macros and lots of duplicated code. With the attribute
passed it's instead possible to attach some data to the attribute
and then use that in shared low level functions to do different things.
I need this for the dynamically generated bank attributes in the x86
machine check code, but it'll allow some further cleanups.
I converted all users in tree to the new show/store prototype. It's a single
huge patch to avoid unbisectable sections.
Runtime tested: x86-32, x86-64
Compiled only: ia64, powerpc
Not compile tested/only grep converted: sh, arm, avr32
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add missing module.h include to fix this:
CC arch/s390/kernel/stacktrace.o
arch/s390/kernel/stacktrace.c:84: warning: data definition has no type or storage class
arch/s390/kernel/stacktrace.c:84: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
arch/s390/kernel/stacktrace.c:84: warning: parameter names (without types) in function declaration
arch/s390/kernel/stacktrace.c:97: warning: data definition has no type or storage class
arch/s390/kernel/stacktrace.c:97: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
arch/s390/kernel/stacktrace.c:97: warning: parameter names (without types) in function declaration
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens