Commit Graph

722654 Commits

Author SHA1 Message Date
Thomas Petazzoni 573500dbf0 net: sh_eth: don't use NULL as "struct device" for the DMA mapping API
Using NULL as argument for the DMA mapping API is bogus, as the DMA
mapping API may use information from the "struct device" to perform
the DMA mapping operation. Therefore, pass the appropriate "struct
device".

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05 14:40:34 -05:00
Thomas Petazzoni 22c1aed409 net: sh_eth: use correct "struct device" when calling DMA mapping functions
There are two types of "struct device": the one representing the
physical device on its physical bus (platform, SPI, PCI, etc.), and
the one representing the logical device in its device class (net,
etc.).

The DMA mapping API expects to receive as argument a "struct device"
representing the physical device, as the "struct device" contains
information about the bus that the DMA API needs.

However, the sh_eth driver mistakenly uses the "struct device"
representing the logical device (embedded in "struct net_device")
rather than the "struct device" representing the physical device on
its bus.

This commit fixes that by adjusting all calls to the DMA mapping API.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05 14:40:34 -05:00
David S. Miller c1d69de987 Merge branch 'RED-qdisc-fixes'
Nogah Frankel says:

====================
RED qdisc fixes

Add some input validation checks to RED qdisc.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05 14:37:13 -05:00
Nogah Frankel 8afa10cbe2 net_sched: red: Avoid illegal values
Check the qmin & qmax values doesn't overflow for the given Wlog value.
Check that qmin <= qmax.

Fixes: a783474591 ("[PKT_SCHED]: Generic RED layer")
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05 14:37:13 -05:00
Nogah Frankel 5c47220342 net_sched: red: Avoid devision by zero
Do not allow delta value to be zero since it is used as a divisor.

Fixes: 8af2a218de ("sch_red: Adaptative RED AQM")
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05 14:37:12 -05:00
Christian König 5ff7ec02f2 drm/ttm: swap consecutive allocated cached pages v3
When we detect consecutive allocation of pages swap them to avoid
accidentally freeing them as huge page.

v2: use swap
v3: check if it's really the first allocated page

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-05 14:37:06 -05:00
Roger He 2bf257d662 drm/ttm: roundup the shrink request to prevent skip huge pool
e.g. shrink reqeust is less than 512, the logic will skip huge pool

Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-05 14:37:06 -05:00
Roger He bae5c5b50b drm/ttm: add page order support in ttm_pages_put
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-05 14:37:06 -05:00
Roger He 54ddc5f2d7 drm/ttm: add set_pages_wb for handling page order more than zero
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-05 14:37:05 -05:00
Roger He 6d5e4e3213 drm/ttm: add page order in page pool
to indicate page order for each element in the pool

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-05 14:37:05 -05:00
Roger He 1ee0d3d778 drm/ttm: use NUM_PAGES_TO_ALLOC always
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-05 14:37:05 -05:00
Linus Torvalds 13231cacce SCSI fixes on 20171205
We have a bunch of fixes for aacraid, a set of coherency fixes that
 only affect non-coherent platforms and one coccinelle detected null
 check after use.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJaJs8oAAoJEAVr7HOZEZN4MhkQAJZ/KfYI4CTrX45NAV3AlOT1
 CW39vYT3ODjsw97uJkoJjbXKIqHemObP2JlcIjhdffd/Vrk1Yn88KclUktSjwhBV
 X5wGprktrmCKKcL1iobSv5o2r/2TZpeMHBIgdC1LogCw7L5eCBibnx8GiU+OkXJM
 2aGw8GPS+hySilTde20aL6OumQfLFuZzk8TeZ5bAAjyIgIJqw/1pyn+2Hy5EnyW7
 n5RpC8qG+cNLXHHYaITHX666lSRM+DMdRGVNLxK9dzdQkaFpu7w598/aeM0zRJuS
 IqAVlLowY+pt3C14ax9jxvGiZ96kuYClWBeWuw4oHGfLxNqNU2xd38xzJTkUoRX7
 0F16+froi85DV8UWbDswakOfs0vAoW1kLES3nnwrZ6inQ9yHANEBrXY4jZ3HwcEy
 ax81fYMrpd8kD9lI0mGiX5qoanfv08jTn5UfFYNddYFcCrKRymDCVZDw6p/9JFxV
 Tkry526TxELziqsfKNHt2yFKKDJ8CjtQqFSUyeo/pBCo7X87aV5B3oFgtb4lxseb
 yT7o+mo452jNuL8veMPe6vz21uTwbfQfof1wk4wV8bRydGwu7ofOdeILLgtQIieM
 yb+8f/XGpg1Q+Y3pTfO46a/d76KxhEHVsgqQLwMQB7p+C9PZh5Fc3VdSyjmUFyEN
 Dc6i3IbfiZVgKm9Tsouf
 =boPv
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "A bunch of fixes for aacraid, a set of coherency fixes that only
  affect non-coherent platforms and one coccinelle detected null check
  after use"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: libsas: align sata_device's rps_resp on a cacheline
  scsi: use dma_get_cache_alignment() as minimum DMA alignment
  scsi: dma-mapping: always provide dma_get_cache_alignment
  scsi: ufs: ufshcd: fix potential NULL pointer dereference in ufshcd_config_vreg
  scsi: aacraid: Prevent crash in case of free interrupt during scsi EH path
  scsi: aacraid: Perform initialization reset only once
  scsi: aacraid: Check for PCI state of device in a generic way
2017-12-05 10:31:32 -08:00
Linus Torvalds e6cdd80a83 Here is the first rc pull request for RDMA. This includes an important core
fix for a regression in iWarp if SELinux is enabled, a fix for a compilation
 regression introduced in this merge window, and one obscure kconfig
 combination that oops's the kernel.
 
 For drivers, we have hns fixes needed to make their devices work on certain
 ARM IOMMU configurations, a stack data leak for hfi1, and various testing
 discovered -rc bug fixes for i40iw.
 
 This cycle we pushed back on the driver maintainers to have better commit
 messages for -rc material.
 
 You may need to pull my latest PGP key from the GPG key servers for this, I am
 not certain if the subkey update will make it to kernel.org's WKD before you
 need it.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCgAGBQJaJcu6AAoJEDht9xV+IJsa8aoP/Rh3tHT3mqN6v/p9HgUyUNRS
 gyDJ4BHg3A+O1UrnBjFjrAhpX9bqik/96n9t14Er7kVM9gxaDzOaCNd9+ASsKjDf
 fXRusCnKS5RP5CpQ16e6qurkOsBXghsJKTL+zpqGSmDf0yUBQCJUkmRNJNhiaUtW
 YEp92dfZytTK+iEmuXW4fJoIKWK3N5aOkttiK8BFb6XvmsUnWSp1wlBS2FhRzDq9
 PPwfM2EE/x46dFF1/w04M5hVDPO6Bngq0Tvo+EdOlAMwKN3Zmun+fSOLKaxg44Of
 dyN6dsu5tKi200Nbdq6cBkehWL6CukSGdJnepeI+xW+8hve9Eu9O6j6O3pMb/dYn
 /vvqE14KhrR1B3F5LFkJLcxxKRl97S2uPhOY2j3oU4L93s9B4X6geXX2oLVIos1r
 41YPu1/7OQyQffp4eKgsz4eA38TpdG6DoOlFMXgdIboJ8bASuRuyfLISVviMc8dx
 SKQTZTY54FK7uJMRw4rkcOlVUpJ2tyuVZr+Lt8p80IpnySCdJsEgAZkJngCPOKRT
 2h8VdfFwzhdlf3Ni5tZRZdMtE6oMD5BMa0jri7xtyKYa0o3gUqvHDGMTSVlQ1maF
 qXMP2mApTcpdFuFvdbnxIeLzP8zigJVkvIsqeKHGS8gt+dxF/934rTY1NTj3rQN5
 zmClIoiVg7NvHlDzvwg+
 =YaUB
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
 "Here is the first rc pull request for RDMA. This includes an important
  core fix for a regression in iWarp if SELinux is enabled, a fix for a
  compilation regression introduced in this merge window, and one
  obscure kconfig combination that oops's the kernel.

  For drivers, we have hns fixes needed to make their devices work on
  certain ARM IOMMU configurations, a stack data leak for hfi1, and
  various testing discovered -rc bug fixes for i40iw.

  This cycle we pushed back on the driver maintainers to have better
  commit messages for -rc material"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  IB/core: Only enforce security for InfiniBand
  RDMA/hns: Get rid of page operation after dma_alloc_coherent
  RDMA/hns: Get rid of virt_to_page and vmap calls after dma_alloc_coherent
  RDMA/hns: Fix the issue of IOVA not page continuous in hip08
  IB/core: Init subsys if compiled to vmlinuz-core
  RDMA/cma: Make sure that PSN is not over max allowed
  i40iw: Notify user of established connection after QP in RTS
  i40iw: Move MPA request event for loopback after connect
  i40iw: Correct ARP index mask
  i40iw: Do not free sqbuf when event is I40IW_TIMER_TYPE_CLOSE
  i40iw: Allocate a sdbuf per CQP WQE
  IB: INFINIBAND should depend on HAS_DMA
  IB/hfi1: Initialize bth1 in 16B rc ack builder
2017-12-05 10:10:15 -08:00
Linus Torvalds 6a5e05a47b Char/Misc fixes for 4.15-rc3
Here are some small misc driver fixes for 4.15-rc3 to resolve reported
 issues.  Specifically these are:
 	- binder fix for a memory leak
 	- vpd driver fixes for a number of reported problems
 	- hyperv driver fix for memory accesses where it shouldn't be.
 
 All of these have been in linux-next for a while.  There's also one more
 MAINTAINERS file update that came in today to get the Android
 developer's emails correct, which is also in this pull request, that was
 not in linux-next, but should not be an issue.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWia6IQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykaKwCgx1lw4qMmetUzjKBX+OMgEkFZo3UAoIL/DLiB
 ZyMb52XWdP0pScSsFUyn
 =riSs
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc fixes from Greg KH:
 "Here are some small misc driver fixes for 4.15-rc3 to resolve reported
  issues. Specifically these are:

   - binder fix for a memory leak

   - vpd driver fixes for a number of reported problems

   - hyperv driver fix for memory accesses where it shouldn't be.

  All of these have been in linux-next for a while. There's also one
  more MAINTAINERS file update that came in today to get the Android
  developer's emails correct, which is also in this pull request, that
  was not in linux-next, but should not be an issue"

* tag 'char-misc-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  MAINTAINERS: update Android driver maintainers.
  firmware: vpd: Fix platform driver and device registration/unregistration
  firmware: vpd: Tie firmware kobject to device lifetime
  firmware: vpd: Destroy vpd sections in remove function
  hv: kvp: Avoid reading past allocated blocks from KVP file
  Drivers: hv: vmbus: Fix a rescind issue
  ANDROID: binder: fix transaction leak.
2017-12-05 10:06:23 -08:00
Linus Torvalds 1fbd55c0cc driver core fixes for 4.15-rc3
Here are 3 small fixes for some reported issues:
 	- a debugfs build error that lots of people have reported
 	- a Kconfig help text cleanup now that the firmware is not in
 	  the kernel tree
 	- a isa bus bug fix for a reported issue that has been there
 	  since 2.6.18.
 
 All of these have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWia7Ag8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ymIZACePFa9lQwqJpxToCCm0Z2Yi1x50f0AoNP6TI9g
 mkCgELuNi6QdhvFYIVjW
 =8HAh
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are 3 small fixes for some reported issues:

   - a debugfs build error that lots of people have reported

   - a Kconfig help text cleanup now that the firmware is not in the
     kernel tree

   - an ISA bus bug fix for a reported issue that has been there since
     2.6.18.

  All of these have been in linux-next with no reported issues"

* tag 'driver-core-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  firmware: cleanup FIRMWARE_IN_KERNEL message
  isa: Prevent NULL dereference in isa_bus driver callbacks
  debugfs: fix debugfs_real_fops() build error
2017-12-05 10:00:14 -08:00
Linus Torvalds 73996933b5 staging and iio driver fixes for 4.15-rc3
Here are a number of small staging and iio driver fixes for reported
 issues for 4.15-rc3.  Nothing major here, the majority is IIO issues,
 like normal, but there are also some small bugfixes for a few staging
 drivers as well.
 
 Full details are in the shortlog.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWia7tQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylHgACeNtnYUpuwRUI6K3JOxxClDVUzVRUAn22oMDn7
 UlkqSVX7hMeC5jEvO8yj
 =k+Ek
 -----END PGP SIGNATURE-----

Merge tag 'staging-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and iio driver fixes from Greg KH:
 "Here are a number of small staging and iio driver fixes for reported
  issues for 4.15-rc3. Nothing major here, the majority is IIO issues,
  like normal, but there are also some small bugfixes for a few staging
  drivers as well.

  Full details are in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: stm32: fix adc/trigger link error
  iio: health: max30102: Temperature should be in milli Celsius
  iio: fix kernel-doc build errors
  iio: adc: meson-saradc: Meson8 and Meson8b do not have REG11 and REG13
  iio: adc: meson-saradc: initialize the bandgap correctly on older SoCs
  iio: adc: meson-saradc: fix the bit_idx of the adc_en clock
  iio: proximity: sx9500: Assign interrupt from GpioIo()
  iio: adc: cpcap: fix incorrect validation
  staging: octeon-usb: use __delay() instead of cvmx_wait()
  staging: rtl8188eu: Fix incorrect response to SIOCGIWESSID
  staging: ccree: fix leak of import() after init()
  staging: comedi: ni_atmio: fix license warning.
2017-12-05 09:57:34 -08:00
Linus Torvalds 84dda2965d TTY/Serial driver fixes for 4.15-rc3
Here are some small serdev and serial fixes for 4.15-rc3.  They resolve
 some reported problems:
 	- a number of serdev fixes to resolve crashes
 	- MIPS build fixes for their serial port
 	- a new 8250 device id
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWia9GQ8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynSEgCfZ/zINl1ItdXcMUr1cnznwNgFGhAAoIoIpmre
 +4qtH6PjV/+kq+2j2lmG
 =bxjP
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver fixes from Greg KH:
 "Here are some small serdev and serial fixes for 4.15-rc3. They resolve
  some reported problems:

   - a number of serdev fixes to resolve crashes

   - MIPS build fixes for their serial port

   - a new 8250 device id

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  MIPS: Add custom serial.h with BASE_BAUD override for generic kernel
  serdev: ttyport: fix tty locking in close
  serdev: ttyport: fix NULL-deref on hangup
  serdev: fix receive_buf return value when no callback
  serdev: ttyport: add missing receive_buf sanity checks
  serial: 8250_early: Only set divisor if valid clk & baud
  serial: 8250_pci: Add Amazon PCI serial device ID
2017-12-05 09:05:16 -08:00
Linus Torvalds 6b0b3bda3d USB fixes for 4.15-rc3
Here are a few minor USB fixes for 4.15-rc3.
 
 The largest here is the Kconfig text and configuration changes for the
 USB TypeC build options that you reported during the -rc1 merge window.
 The others are all just small fixes for reported issues, as well as some
 new device ids.
 
 The most "interesting" of anything here is the usbip fixes as it seems
 lots of people are starting to pay attention to that driver at the
 moment.  These fixes should resolve all of the reported problems as of
 now.
 
 Of course there are the usual xhci and gadget fixes as well, can't go a
 pull request without those...
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWia97w8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynwMQCeL6klrbARdug4GQWqmO2eDIYr2aQAn2MFYd5P
 VWCn8WsAf7toUTsB+J/g
 =z/by
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a few minor USB fixes for 4.15-rc3.

  The largest here is the Kconfig text and configuration changes for the
  USB TypeC build options that you reported during the -rc1 merge
  window. The others are all just small fixes for reported issues, as
  well as some new device ids.

  The most "interesting" of anything here is the usbip fixes as it seems
  lots of people are starting to pay attention to that driver at the
  moment. These fixes should resolve all of the reported problems as of
  now.

  Of course there are the usual xhci and gadget fixes as well, can't go
  a pull request without those...

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
  usb: xhci: fix panic in xhci_free_virt_devices_depth_first
  xhci: Don't show incorrect WARN message about events for empty rings
  usbip: fix usbip attach to find a port that matches the requested speed
  usbip: Fix USB device hang due to wrong enabling of scatter-gather
  uas: Always apply US_FL_NO_ATA_1X quirk to Seagate devices
  usb: quirks: Add no-lpm quirk for KY-688 USB 3.1 Type-C Hub
  usb: build drivers/usb/common/ when USB_SUPPORT is set
  usb: hub: Cycle HUB power when initialization fails
  USB: core: Add type-specific length check of BOS descriptors
  usb: host: fix incorrect updating of offset
  USB: ulpi: fix bus-node lookup
  USB: usbfs: Filter flags passed in from user space
  usb: add user selectable option for the whole USB Type-C Support
  usb: f_fs: Force Reserved1=1 in OS_DESC_EXT_COMPAT
  usb: gadget: core: Fix ->udc_set_speed() speed handling
  usb: gadget: allow to enable legacy drivers without USB_ETH
  usb: gadget: udc: renesas_usb3: fix number of the pipes
  usb: gadget: don't dereference g until after it has been null checked
  USB: serial: usb_debug: add new USB device id
  usb: bdc: fix platform_no_drv_owner.cocci warnings
  ...
2017-12-05 08:50:04 -08:00
Zumeng Chen 5811767294 gianfar: fix a flooded alignment reports because of padding issue.
According to LS1021A RM, the value of PAL can be set so that the start of the
IP header in the receive data buffer is aligned to a 32-bit boundary. Normally,
setting PAL = 2 provides minimal padding to ensure such alignment of the IP
header.

However every incoming packet's 8-byte time stamp will be inserted into the
packet data buffer as padding alignment bytes when hardware time stamping is
enabled.

So we set the padding 8+2 here to avoid the flooded alignment faults:

root@128:~# cat /proc/cpu/alignment
User:           0
System:         17539 (inet_gro_receive+0x114/0x2c0)
Skipped:        0
Half:           0
Word:           0
DWord:          0
Multi:          17539
User faults:    2 (fixup)

Also shown when exception report enablement

CPU: 0 PID: 161 Comm: irq/66-eth1_g0_ Not tainted 4.1.21-rt13-WR8.0.0.0_preempt-rt #16
Hardware name: Freescale LS1021A
[<8001b420>] (unwind_backtrace) from [<8001476c>] (show_stack+0x20/0x24)
[<8001476c>] (show_stack) from [<807cfb48>] (dump_stack+0x94/0xac)
[<807cfb48>] (dump_stack) from [<80025d70>] (do_alignment+0x720/0x958)
[<80025d70>] (do_alignment) from [<80009224>] (do_DataAbort+0x40/0xbc)
[<80009224>] (do_DataAbort) from [<80015398>] (__dabt_svc+0x38/0x60)
Exception stack(0x86ad1cc0 to 0x86ad1d08)
1cc0: f9b3e080 86b3d072 2d78d287 00000000 866816c0 86b3d05e 86e785d0 00000000
1ce0: 00000011 0000000e 80840ab0 86ad1d3c 86ad1d08 86ad1d08 806d7fc0 806d806c
1d00: 40070013 ffffffff
[<80015398>] (__dabt_svc) from [<806d806c>] (inet_gro_receive+0x114/0x2c0)
[<806d806c>] (inet_gro_receive) from [<80660eec>] (dev_gro_receive+0x21c/0x3c0)
[<80660eec>] (dev_gro_receive) from [<8066133c>] (napi_gro_receive+0x44/0x17c)
[<8066133c>] (napi_gro_receive) from [<804f0538>] (gfar_clean_rx_ring+0x39c/0x7d4)
[<804f0538>] (gfar_clean_rx_ring) from [<804f0bf4>] (gfar_poll_rx_sq+0x58/0xe0)
[<804f0bf4>] (gfar_poll_rx_sq) from [<80660b10>] (net_rx_action+0x27c/0x43c)
[<80660b10>] (net_rx_action) from [<80033638>] (do_current_softirqs+0x1e0/0x3dc)
[<80033638>] (do_current_softirqs) from [<800338c4>] (__local_bh_enable+0x90/0xa8)
[<800338c4>] (__local_bh_enable) from [<8008025c>] (irq_forced_thread_fn+0x70/0x84)
[<8008025c>] (irq_forced_thread_fn) from [<800805e8>] (irq_thread+0x16c/0x244)
[<800805e8>] (irq_thread) from [<8004e490>] (kthread+0xe8/0x104)
[<8004e490>] (kthread) from [<8000fda8>] (ret_from_fork+0x14/0x2c)

Signed-off-by: Zumeng Chen <zumeng.chen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05 11:48:04 -05:00
Linus Torvalds 54b9937082 Pin control fixes for the v4.15 cycle:
- Fix the UART2 RTS pin mode on Intel Denverton.
 - Fix the direction_output() behaviour on the Armada 37xx.
 - Fix the groups selection per-SoC on the Gemini.
 - Fix the interrupt pin bank on the Sunxi A80.
 - Fix the UART mux on the Sunxi A64.
 - Disable the strict mode on the Sunxi H5 driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJaJpuUAAoJEEEQszewGV1zaEwQAJhvSs4drBr8UNNH1Kg9FS7p
 yyrxHKYpgqzjvAxokZuffw/FBqLZfufih+o0SIk9icsllmDfN4GFTL4E5mVKETgH
 9/4R5So8mMDiSEjzWqKG+NwREgMx6Xz5JR68GTIgEmIn5HYDuv3WT3yhfLQrNt2B
 0CaWe3raRZ7zagj2DRx8E5NPL6pXiMFGsz0PPTmuOpc6Nfo47KOo7xgxUmTRUA8N
 SsjM6DwkAzMPv1Z99izWsadcKP1qFzVf+5mOdna/rDfffm+33T3+Cw5R3KEtl512
 4Kyx4URGcQY/fCvYm4pIxOkS2/iGi3/MaDYcSR0MaogGJ7IOFBiSD0xZ3Opp90Bn
 +M/oTdH1CiHjOYUCyFW9P44aTE2bG2LEELW7am4cjyTTRE/ioy2ARC8/2v4QaLZ5
 U3r/tjs+gIDb+nwUuxLbibT1V9j4JZ2QCp9o9k7VCmsXVsKYwTgbIR4AfpvBzUCd
 Y+C9aBux5ns7NTNv7xnhbBWn8lH+9pT7BHmNQI7Ru7eRkosWoz3pZ+BijvV+exeQ
 7dCec7rj+lDyDmnvjxwcdhsXv+l/JIap5fK3RHWLxpjJ/Ct5EsnMII6eh2InPC4E
 2GvusJBOb5etUms25V/tVUY+v2vIF8UDUg9qkZSDBX7+zuKNng4h3XotB81rR70K
 0uxFl7X2hW1midI7hJCC
 =/auO
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
 "As with GPIO not much action in pin control. All are driver fixes:

   - fix the UART2 RTS pin mode on Intel Denverton

   - fix the direction_output() behaviour on the Armada 37xx

   - fix the groups selection per-SoC on the Gemini

   - fix the interrupt pin bank on the Sunxi A80

   - fix the UART mux on the Sunxi A64

   - disable the strict mode on the Sunxi H5 driver"

* tag 'pinctrl-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: sunxi: Disable strict mode for H5 driver
  pinctrl: sunxi: Fix A64 UART mux value
  pinctrl: sunxi: Fix A80 interrupt pin bank
  pinctrl: gemini: Fix usage of 3512 groups
  pinctrl: armada-37xx: Fix direction_output() callback behavior
  pinctrl: denverton: Fix UART2 RTS pin mode
2017-12-05 08:47:20 -08:00
Linus Torvalds f81c728745 GPIO fixes for the v4.15 cycle:
- Fix a crash in the 74x164 driver
 - Fix IRQ banks in the DaVinci driver
 - Fix the vendor prefix in the PCA953x driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJaJpoPAAoJEEEQszewGV1zkS8P/iDQiDNCASokABajkyDDXQGG
 5jbbiANBH9DwCBDFru88VH9FyF+HDtoy2eOyi7pQe5pyufgZs+0EgHsT0M11aTux
 jOyiiK0jR1M4Ny255nWyOsT820NF58j53Bpze28U0xtiEWTA0ohqEgCTpp7825px
 zc5TMrHhP2Gvf5FJNQU7rphzoG/oSLevONzSxNplcfXtSFoEiu5JDSEQphna3PRY
 PLFiso4JlXhonhARIZ6MGB32Dx15D3jzoh21BRNmUDT/TeBLnaQckRuP7fHNUOsG
 inhAuiROXFVw27qZQL1DiyIBg5fDNreCPJ0hk+/sM92/QAz3cDLZoKjLmE5nqh7q
 d4H0/tDBJi/f3v0ITLwMjWk2dAiEPgnDUpdz7rlz0syhRvBjGo6J6LGG3LdNnNH9
 oqc7zliQARkO4ELARnz9HomIjHZsHPYD8NOJe6CQvtashabzFEa8jK+GFA32OfaG
 LFZyaQyxjLKsh0qjGg+4XMHcuVj1/33xLVOdGFUE9MkZQxMKwDMZRkwSV1fSOFKF
 r5ChdjTz71V711ONRmZuTd9vChHpEy2AJj7n1z1acwtZkI9owHIXdhf9O6AgB/+z
 hey+he+RmsxcPwMNUd4yI/hTQEiKShFVfK0E/TDoUG3i/TY8K73vfZUgYEZxM6mj
 Hsc/T5J/OIrlO3RD9tzB
 =B3ae
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
 "Three small fixes for GPIO. Not much, I'm surprised by the silence in
  my subsystems. All driver fixes:

   - fix a crash in the 74x164 driver

   - fix IRQ banks in the DaVinci driver

   - fix the vendor prefix in the PCA953x driver"

* tag 'gpio-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: pca953x: fix vendor prefix for PCA9654
  gpio: davinci: Assign first bank regs for unbanked case
  gpio: 74x164: Fix crash during .remove()
2017-12-05 08:44:19 -08:00
Johannes Berg 029b6d1405 Revert "net: core: maybe return -EEXIST in __dev_alloc_name"
This reverts commit d6f295e9def0; some userspace (in the case
we noticed it's wpa_supplicant), is relying on the current
error code to determine that a fixed name interface already
exists.

Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05 11:29:48 -05:00
Pieter Jansen van Vuuren 42d779ffc1 nfp: fix port stats for mac representors
Previously we swapped the tx_packets, tx_bytes and tx_dropped counters
with rx_packets, rx_bytes and rx_dropped counters, respectively. This
behaviour is correct and expected for VF representors but it should not
be swapped for physical port mac representors.

Fixes: eadfa4c3be ("nfp: add stats and xmit helpers for representors")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05 11:29:36 -05:00
Eric Dumazet e599ea1410 Revert "tcp: must block bh in __inet_twsk_hashdance()"
We had to disable BH _before_ calling __inet_twsk_hashdance() in commit
cfac7f836a ("tcp/dccp: block bh before arming time_wait timer").

This means we can revert 614bdd4d6e ("tcp: must block bh in
__inet_twsk_hashdance()").

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05 11:23:58 -05:00
Linus Torvalds b7ad7ef742 remove task and stack pointer printout from oops dump
Geert Uytterhoeven reported a NFS oops, and pointed out that some of the
numbers were hashed and useless.

We could just turn them from '%p' into '%px', but those numbers are
really just legacy, and useless even when not hashed.

So just remove them entirely.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-12-05 08:23:20 -08:00
James Ausmus 46442beed9 drm/i915/cnl: Mask previous DDI - PLL mapping
Without masking out the old value, we can end up pointing the DDI to a
disabled PLL, which makes the system fall over. Mask out the previous
value before setting the PLL to DDI mapping.

This can be observed by running igt/testdisplay with both an eDP and
HDMI/DP output active.

v2: Add the Bugzilla link

Fixes: 555e38d273 ("drm/i915/cnl: DDI - PLL mapping")
Testcase: igt/testdisplay
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103997
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: James Ausmus <james.ausmus@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201021700.13504-1-james.ausmus@intel.com
(cherry picked from commit 23a7068ec5)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-12-05 16:56:41 +02:00
Ville Syrjälä a87e55f89f drm/i915: Fix vblank timestamp/frame counter jumps on gen2
Previously I was under the impression that the scanline counter
reads 0 when the pipe is off. Turns out that's not correct, and
instead the scanline counter simply stops when the pipe stops, and
it retains it's last value until the pipe starts up again, at which
point the scanline counter jumps to vblank start.

These jumps can cause the timestamp to jump backwards by one frame.
Since we use the timestamps to guesstimage also the frame counter
value on gen2, that would cause the frame counter to also jump
backwards, which leads to a massice difference from the previous value.
The end result is that flips/vblank events don't appear to complete as
they're stuck waiting for the frame counter to catch up to that massive
difference.

Fix the problem properly by actually making sure the scanline counter
has started to move before we assume that it's safe to enable vblank
processing.

v2: Less pointless duplication in the code (Chris)

Cc: stable@vger.kernel.org
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: b7792d8b54 ("drm/i915: Wait for pipe to start before sampling vblank timestamps on gen2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129153732.3612-1-ville.syrjala@linux.intel.com
(cherry picked from commit 8fedd64dab)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-12-05 16:56:36 +02:00
Chris Wilson dda4b8f732 drm/i915: Skip switch-to-kernel-context on suspend when wedged
If the HW is already wedged, attempting to submit a request will
generate an -EIO. If we tried this during suspend, we would abort
whereas all we want to do is to go sleep and throw away the corrupt
state.

Fixes: 5ab57c7020 ("drm/i915: Flush logical context image out to memory upon suspend")
Testcase: igt/gem_eio/suspend
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171130102951.14965-1-chris@chris-wilson.co.uk
(cherry picked from commit ecf73eb2d2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-12-05 16:56:28 +02:00
Martijn Coenen 66bc5df311 MAINTAINERS: update Android driver maintainers.
Add Todd Kjos and myself, remove Riley (who no
longer works at Google).

Signed-off-by: Martijn Coenen <maco@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05 15:35:08 +01:00
Sara Sharon bf19037074 iwlwifi: mvm: mark MIC stripped MPDUs
When RADA is active, the hardware decrypts the packets and strips off
the MIC as it is useless after decryption. Indicate that to mac80211.

Cc: stable@vger.kernel.org # 4.13+
[this is needed for the 9000-series HW to work properly]
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-05 16:23:30 +02:00
David Spinadel 9d0fc5a50a iwlwifi: mvm: enable RX offloading with TKIP and WEP
Set the flag that indicates that ICV was stripped on if
this option was enabled in the HW.

Cc: stable@vger.kernel.org # 4.13+
[this is needed for the 9000-series HW to work properly]
Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-05 16:23:30 +02:00
Johannes Berg 6c2d49fdc5 iwlwifi: mvm: flush queue before deleting ROC
Before deleting a time event (remain-on-channel instance), flush
the queue so that frames cannot get stuck on it. We already flush
the AUX STA queues, but a separate station is used for the P2P
Device queue.

Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-05 16:23:29 +02:00
Ihab Zhaika 567deca8e7 iwlwifi: add new cards for 9260 and 22000 series
add 1 PCI ID for 9260 series and 1 for 22000 series.

Cc: stable@vger.kernel.org
Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-12-05 16:23:29 +02:00
Daniel Borkmann 037776e4c6 Merge branch 'bpf-fix-broken-uapi-for-pt-regs'
Hendrik Brueckner says:

====================
Perf tool bpf selftests revealed a broken uapi for s390 and arm64.
With the BPF_PROG_TYPE_PERF_EVENT program type the bpf_perf_event
structure exports the pt_regs structure for all architectures.

This fails for s390 and arm64 because pt_regs are not part of the
user api and kept in-kernel only.  To mitigate the broken uapi,
introduce a wrapper that exports pt_regs in an asm-generic way.
For arm64, export the exising user_pt_regs structure.  For s390,
introduce a user_pt_regs structure that exports the beginning of
pt_regs.

Note that user_pt_regs must export from the beginning of pt_regs
as BPF_PROG_TYPE_PERF_EVENT program type is not the only type for
running BPF programs.

Some more background:

  For the bpf_perf_event, there is a uapi definition that is
  passed to the BPF program.  For other "probe" points like
  trace points, kprobes, and uprobes, there is no uapi and the
  BPF program is always passed pt_regs (which is OK as the BPF
  program runs in the kernel context).  The perf tool can attach
  BPF programs to all of these "probe" points and, optionally,
  can create a BPF prologue to access particular arguments
  (passed as registers).  For this, it uses DWARF/CFI
  information to obtain the register and calls a perf-arch
  backend function, regs_query_register_offset().  This function
  returns the index into (user_)pt_regs for a particular
  register.  Then, perf creates a BPF prologue that accesses
  this register based on the passed stucture from the "probe"
  point.

Part of this series, are also updates to the testing and bpf selftest
to deal with asm-specifics.  To complete the bpf support in perf, the
the regs_query_register_offset function is added for s390 to support
BPF prologue creation.

Changelog v1 -> v2:
- Correct kbuild test bot issues by including
  asm-generic/bpf_perf_event.h for archictectures that do not have
  their own asm version.
- Added patch to clean-up whitespace and coding style issues in s390
  asm/ptrace.h (#4/6) as suggested by Alexei.
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-05 15:02:42 +01:00
Hendrik Brueckner a81c421366 perf s390: add regs_query_register_offset()
The regs_query_register_offset() helper function converts
register name like "%r0" to an offset of a register in user_pt_regs
It is required by the BPF prologue generator.

The user_pt_regs structure was recently added to "asm/ptrace.h".
Hence, update tools/perf/check-headers.sh to keep the header file
in sync with kernel changes.

Suggested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-05 15:02:41 +01:00
Hendrik Brueckner 618e165b2a selftests/bpf: sync kernel headers and introduce arch support in Makefile
Synchronize the uapi kernel header files which solves the broken
uapi export of pt_regs.  Because of arch-specific uapi headers,
extended the include path in the Makefile.

With this change, the test_verifier program compiles and runs successfully
on s390.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-05 15:02:41 +01:00
Hendrik Brueckner 62e1dfa3e1 s390/uapi: correct whitespace & coding style in asm/ptrace.h
Correct whitespace and coding style issues in the s390 asm/ptrace.h
uapi header file.  This is preparatory work to copy it to the tools/
directory for inclusion by selftests and perf.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-05 15:02:41 +01:00
Hendrik Brueckner a39cada702 arm64/bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type
Correct the broken uapi for the BPF_PROG_TYPE_PERF_EVENT program type
by exporting the user_pt_regs structure instead of the pt_regs structure
that is in-kernel only.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-05 15:02:41 +01:00
Hendrik Brueckner 466698e654 s390/bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type
To mitigate and correct the broken uapi for the BPF_PROG_TYPE_PERF_EVENT
program type, introduce a user_pt_regs structure (similar to arm64) that
exports parts from the beginnig of the pt_regs structure.

The export must start with the beginning of the pt_regs structure because
to correctly calculate BPF prologues for perf (regs_query_register_offset()).

For BPF_PROG_TYPE_PERF_EVENT program types, the BPF program is then passed
a user_pt_regs structure.

Note: Depending on future changes to the s390 pt_regs structure, consider
the user_pt_regs structure to be stable for a particular kernel version
only. (Of course, s390 tries to ensure keep it stable as much as possible.)

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-05 15:02:41 +01:00
Hendrik Brueckner c895f6f703 bpf: correct broken uapi for BPF_PROG_TYPE_PERF_EVENT program type
Commit 0515e5999a ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT
program type") introduced the bpf_perf_event_data structure which
exports the pt_regs structure.  This is OK for multiple architectures
but fail for s390 and arm64 which do not export pt_regs.  Programs
using them, for example, the bpf selftest fail to compile on these
architectures.

For s390, exporting the pt_regs is not an option because s390 wants
to allow changes to it.  For arm64, there is a user_pt_regs structure
that covers parts of the pt_regs structure for use by user space.

To solve the broken uapi for s390 and arm64, introduce an abstract
type for pt_regs and add an asm/bpf_perf_event.h file that concretes
the type.  An asm-generic header file covers the architectures that
export pt_regs today.

The arch-specific enablement for s390 and arm64 follows in separate
commits.

Reported-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Fixes: 0515e5999a ("bpf: introduce BPF_PROG_TYPE_PERF_EVENT program type")
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-and-tested-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2017-12-05 15:02:40 +01:00
David Gibson ab9dbf771f Revert "powerpc: Do not call ppc_md.panic in fadump panic notifier"
This reverts commit a3b2cb30f2.

That commit tried to fix problems with panic on powerpc in certain
circumstances, where some output from the generic panic code was being
dropped.

Unfortunately, it breaks things worse in other circumstances. In
particular when running a PAPR guest, it will now attempt to reboot
instead of informing the hypervisor (KVM or PowerVM) that the guest
has crashed. The crash notification is important to some
virtualization management layers.

Revert it for now until we can come up with a better solution.

Fixes: a3b2cb30f2 ("powerpc: Do not call ppc_md.panic in fadump panic notifier")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[mpe: Tweak change log a bit]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-05 23:21:46 +11:00
Kailang Yang f429e7e494 ALSA: hda/realtek - New codec support for ALC257
Add new support for ALC257 codec.

[ It's supposed to be almost equivalent with other ALC25x variants,
  just adding another type and id -- tiwai ]

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-12-05 10:54:10 +01:00
Heiko Carstens 8d306f53b6 s390/mm: fix off-by-one bug in 5-level page table handling
Martin Cermak reported that setting a uprobe doesn't work. Reason for
this is that the common uprobes code tries to get an unmapped area at
the last possible page within an address space.

This broke with commit 1aea9b3f92 ("s390/mm: implement 5 level pages
tables") which introduced an off-by-one bug which prevents to map
anything at the last possible page within an address space.

The check with the off-by-one bug however can be removed since with
commit 8ab867cb08 ("s390/mm: fix BUG_ON in crst_table_upgrade") the
necessary check is done at both call sites.

Reported-by: Martin Cermak <mcermak@redhat.com>
Bisected-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Fixes: 1aea9b3f92 ("s390/mm: implement 5 level pages tables")
Cc: <stable@vger.kernel.org> # v4.13+
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-12-05 07:51:09 +01:00
Martin Schwidefsky 987b154983 s390: Remove redudant license text
More files under arch/s390 have been tagged with the SPDX identifier,
a few of those files have a GPL license text. Remove the GPL text
as it is no longer needed.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-12-05 07:51:09 +01:00
Martin Schwidefsky 9fa1db4c75 s390: add a few more SPDX identifiers
Add the correct SPDX license to a few more files under arch/s390 and
drivers/s390 which have been missed to far.
The SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-12-05 07:51:09 +01:00
Stefan Haberland da340f921d s390/dasd: prevent prefix I/O error
Prevent that a prefix flag is set based on invalid configuration data.
The validity.verify_base flag should only be set for alias devices.
Usually the unit address type is either one of base, PAV alias or
HyperPAV alias. But in cases where the unit address type is not set or
any other value the validity.verify_base flag might be set as well.
This would lead to follow on errors.
Explicitly check for alias devices and set the validity flag only for
them.

Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-12-05 07:51:08 +01:00
Heiko Carstens fbbd7f1a51 s390: always save and restore all registers on context switch
The switch_to() macro has an optimization to avoid saving and
restoring register contents that aren't needed for kernel threads.

There is however the possibility that a kernel thread execve's a user
space program. In such a case the execve'd process can partially see
the contents of the previous process, which shouldn't be allowed.

To avoid this, simply always save and restore register contents on
context switch.

Cc: <stable@vger.kernel.org> # v2.6.37+
Fixes: fdb6d070ef ("switch_to: dont restore/save access & fpu regs for kernel threads")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-12-05 07:51:08 +01:00
Arnd Bergmann bd7a9b3757 s390/dasd: remove 'struct timespec' usage
getnstimeofday() and timespec are deprecated since they can
overflow on 32-bit architectures. This simply changes to the
explicitly typed timespec64 version that doesn't have that
problem.

It would be nice to also convert to monotonic timestamps
and call ktime_get_ts64() rather than ktime_get_real_ts64(),
but that would be a user-visible change.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-12-05 07:51:08 +01:00
Julian Wiedmann b23481fbfc s390/qdio: restrict target-full handling to IQDIO
The 'no target buffer empty' error code only applies to HiperSockets.
If this code is reported on a different queue type, be sure to make the
same amount of noise as for any other error code.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-12-05 07:51:08 +01:00
Julian Wiedmann 0b926ac304 s390/qdio: consider ERROR buffers for inbound-full condition
In the unlikely case that an ERROR buffer (presented by the HW)
consumed the last available slot on the input queue, increment the
corresponding statistics counter.

Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-12-05 07:51:08 +01:00