Commit Graph

1688 Commits

Author SHA1 Message Date
Hans Verkuil 784e8fe417 V4L/DVB (4546): Add u32 argument to VIDIOC_INT_RESET.
The extra argument makes it possible to reset subsystems of a chip if
that is supported.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:34 -03:00
Trent Piepho d7304dee3b V4L/DVB (4533): Tda9887: add configuration setting for L standard PLL gating
Add a tuner config parameter for TDA9887, default_pll_gating_18, that
changes the L standard PLL gating value from 36% to 0% (datasheet says
0%, tda9887 code says 18%).
Turn this on for Microtune 4049FM5, as recomended by tuner datasheet.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:34 -03:00
Trent Piepho 62a7b3e2ad V4L/DVB (4532): Isl6421: Release callback installed incorrectly
The release callback was installed in ops.release, it should have been
ops.release_sec.  This prevented to front-end release from getting
called.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:34 -03:00
Patrick Boettcher fb6065bbd9 V4L/DVB (4530): Another fix for the PID parsing
Still the pid_parse bit was erased.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:34 -03:00
Patrick Boettcher 559463bba8 V4L/DVB (4529): Keep the PID parse bit when resetting the output mode
Matthieu Castet found that with the rewritten dib3000mc-driver the PID-parsing
was handled correctly. This changeset fixes it.
Thanks Matthieu

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:34 -03:00
Jochen Issing ded38d2806 V4L/DVB (4528): PATCH: Club 3D zap250mini
After some structural changes, here comes the updated patch for the Club 3D
zap250mini USB dvb device.
Adding support for a WideView-based device with a different "COLD" ID.

Signed-off-by: Jochen Issing <jochen.issing@isign-softart.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:34 -03:00
Adrian Bunk 56760f07a7 V4L/DVB (4525): Drivers/media/dvb/dvb-usb/dibusb-mb.c: NULL dereference
The Coverity checker spotted the following "we dereference d->fe only
when we know it's NULL" bug:
<--  snip  -->
...
static int dibusb_dib3000mb_frontend_attach(struct dvb_usb_device *d)
{
...
if ((d->fe = dib3000mb_attach(&demod_cfg,&d->i2c_adap,&st->ops)) == NULL) {
d->fe->ops.tuner_ops.init = dvb_usb_tuner_init_i2c;
d->fe->ops.tuner_ops.set_params = dvb_usb_tuner_set_params_i2c;
return -ENODEV;
}
...
<--  snip  -->

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:34 -03:00
Mauro Carvalho Chehab 1e805e679a V4L/DVB (4523): Fix a warning caused by a typo (comma instead of dot-comma)
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:34 -03:00
Mauro Carvalho Chehab 1450e6bedc V4L/DVB (4519): Fixes Helper module dependencies against V4L APIs
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:34 -03:00
Mauro Carvalho Chehab 29adeee534 V4L/DVB (4568): Added missing KS0197 Kconfig item
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:34 -03:00
Mauro Carvalho Chehab faa1cb2039 V4L/DVB (4518): Allow manually selecting the proper helper drivers
There are several boards on V4L that can work with several different
helper modules for audio/video encoding/decoding and similar stuff.
This patch adds the capability of choicing between autoselecting the
pertinent helper modules for each driver, or to manually selecting
them.
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Mike Isely <isely@pobox.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:33 -03:00
Mauro Carvalho Chehab fe9b5bb5e5 V4L/DVB (4516): Split audio/video encoders/decoders from main drivers
Several audio/video encoders/decoders were just bound as if they were 
part of the core driver.
In fact, they are generic enough to be used by other drivers as well, 
since they use I2C event bus to communicate.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:33 -03:00
Mauro Carvalho Chehab 6e40773a9b V4L/DVB (4515): Fixed module name, since it is, in fact, a decoder.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:32 -03:00
Mauro Carvalho Chehab b961b9c5a2 V4L/DVB (4514): Add some comments for Kconfig encoders/decoders itens
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:32 -03:00
Mauro Carvalho Chehab 897ea1307b V4L/DVB (4513): Split audio decoders from bttv
Several audio decoders were just bound as if they were part of
bttv driver. In fact, they are generic enough to be used by other
drivers as well, since they use I2C event bus to communicate.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:32 -03:00
Alexey Dobriyan f70a7a918a V4L/DVB (4512): Ks0127: wire up i2c_add_driver() return value
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:32 -03:00
Eric Sesterhenn d084aa7067 V4L/DVB (4510): Fix signedness error in drivers/media/video/vivi.c
when checking the -Wextra signedness warnings issued by gcc 4.1
I came across this one:
drivers/media/video/vivi.c:1001: warning: comparison of unsigned expression < 0 is always false
Since videobuf_reqbufs() returns negative values on errors the current
code does no real error checking since gcc removes the comparison.
This patch fixes this issue by making ret a normal, signed integer.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:32 -03:00
Mauro Carvalho Chehab 3153d0d05d V4L/DVB (4509): Added missing copyright
Several changes at register stuff were done since commit
b45009b028, but I've forgot
to add the copyright line for this. Those changes allowed
cx88 to have multiple tuners, allowing it to support hardware with
separated radio and video tuners. It also allows binding a tuner to an
specific i2c address.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:32 -03:00
Mauro Carvalho Chehab 0d0d871b3f V4L/DVB (4508): Fix an array overflow on bt866
The Coverity checker spotted the following two array overflows.
Registers 0xcc and 0xdc were cached on reg[] array, with only 128 elements, 
instead of 256.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:32 -03:00
Mauro Carvalho Chehab eb42c42449 V4L/DVB (4507): Make tvp5150 an independent Kconfig item
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:32 -03:00
Mauro Carvalho Chehab 12500f07c6 V4L/DVB (4506): TVP5150 routing logic were broken.
As pointed by The Coverity checker, commit
c7c0b34c27 broked input selection.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:32 -03:00
Ricardo Cerqueira e738e35d1e V4L/DVB (4504): Enable audio DMA restart on channel change even when cx88-alsa is compiled
cx88-alsa can be compiled in (in distro built kernels, for example), but
not used. In those cases, the audio DMA restart is needed for proper sound
on NICAM channels.
This patch enables the DMA restart even with ALSA, but the functions now
check if cx88-alsa is really active.

Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:32 -03:00
Christoph Pfister 4e318bef68 V4L/DVB (4501): Add support for knc one dvb-s plus with 1894:0011
Apparently there are two types of knc1 dvb-s plus cards with different tuners 
(as for the knc1 dvb-s ones). This patch adds support for those cards with 
subsystem id 1894:0011.
Successfully tested by: Benjamin Weber <benny1990@gmail.com>

Signed-off-by: Christoph Pfister <christophpfister@gmail.com>
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:32 -03:00
Andrew de Quincey 0d7466146f V4L/DVB (4500): Fix KNC1 DVBC support
This actually needs the same configuration as the other DVBC cards; simply
no one had managed to test before to find out.

Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:32 -03:00
Alexey Dobriyan 17bc98a41a V4L/DVB (4499): CONFIG_PM=n slim: drivers/media/video/*
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:32 -03:00
Mauro Carvalho Chehab 4d98816be7 V4L/DVB (4498): Offset parameter permission were 0x666, instead of 0x664
Although not dangerous, it may allow a normal user with access to a machine
to untune a TV channel.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:32 -03:00
Chris Pascoe d536e9c41f V4L/DVB (4497): Reset USB part of DViCO Dual Digital during PCI driver attach
If the FX2 does not reset properly during reboot, it can present an
invalid USB device ID and fail to attach.  Prevent this situation
from occuring by resetting the USB part of the card when the PCI part
probes.
Also fix the GPIO configurations so that analog capture will not
inadvertantly reset the USB part.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:32 -03:00
Chris Pascoe fc3398d8b3 V4L/DVB (4496): Tuning tweaks for ZL10353
More register setup which improves the ZL10353's tuning characteristics.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:32 -03:00
Chris Pascoe 8fb957841b V4L/DVB (4495): Fix "no data from ZL10353 based USB tuner" problem
Force parallel transport stream output on the ZL10353 attached to a
bluebird device.
Addresses the problem where a frontend lock was observed, but no MPEG
transport data was received.

Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:32 -03:00
Oliver Endriss b5b168d7b9 V4L/DVB (4493): [lnbp21] release callback fixed
lnbp21 module must use fe->ops.release_sec, not fe->ops.release.
The release function of the frontend driver was never called for cards
with lnbp21...

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:32 -03:00
Oliver Endriss 7df0994d7b V4L/DVB (4492): [dvb_attach] dvb_frontend_detach fix
dvb_frontend_detach() used invalid config option CONFIG_DVB_DETACH,
so dvb_frontend_detach() did not call symbol_put_addr().
Replaced CONFIG_DVB_DETACH by CONFIG_DVB_CORE_ATTACH.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:31 -03:00
Trent Piepho a2b9e3e74a V4L/DVB (4490): Whitespace cleanup
from whitespace cleaning script

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:31 -03:00
Trent Piepho 18795eb98d V4L/DVB (4488): Fix possible crash in Hauppauge eeprom reading
If an eeprom defined two tuners and they supported more than eight
standards combined (as opposed to each), it would overflow an array. 

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:31 -03:00
Mauro Carvalho Chehab 40346b290f V4L/DVB (4485): Fix a warning on PPC64
drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c: In function 'set_standard':
drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c:33: warning: format '%llx' expects type 'long long unsigned int', but argument 2 has type 'v4l2_std_id'

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:31 -03:00
Andrew Morton d591b9ccbe V4L/DVB (4484): Git-dvb: cadet build fix
drivers/media/radio/radio-cadet.c: In function 'cadet_do_ioctl':
drivers/media/radio/radio-cadet.c:362: warning: implicit declaration of function 'KERNEL_VERSION'

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:31 -03:00
Patrick Boettcher c6d74c2ce8 V4L/DVB (4481): Make the dibx000-common-module GPL
Forget to put the MODULE-define and thus to give the license. Now GPL

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:31 -03:00
Dave Jones 0e367a15ed V4L/DVB (4480): Remove null chars from dvb names
DVB null terminates its device names, which seems odd, and should be
unnecessary.
Acked-by: Alan Cox <alan@redhat.com>

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:31 -03:00
Yeasah Pell ef76856d26 V4L/DVB (4479): LNB voltage control was inverted for the benefit of geniatech cards on Kworld
1) It sets LNBDCPol differently based on the card type. Now it should
work properly for both the kworld and geniatech cards.
2) It stops returning an error for the SEC_VOLTAGE_OFF voltage command
(the cx88-dvb level handles the actual voltage on/off, but it still
passes the ioctl down to the cx24123 level, which previously rejected
the OFF as invalid so the ioctl would report failure)

Acked-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Yeasah Pell <yeasah@schwide.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 12:30:14 -03:00
Oliver Endriss 8d90ee5e0e V4L/DVB (4478): [av7110] Support Grundig DVB-T tuner for sub-system 13c2:0001
Some DVB-T cards with Grundig 29504-401 tuner use subsystem id 13c2:0001
(reported by Stuart Butterfield).

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 11:53:52 -03:00
Mauro Carvalho Chehab d93f8860cc V4L/DVB (4477): Improve hardware algorithm by setting the appropriate registers
Hardware algorithm needs to be configured to:
1) Increase timeout constants, to detect weaker signals;
2) do a wider zigzag search.
Acked-by: Manu Abraham <manu@linuxtv.org>

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 11:53:51 -03:00
Mauro Carvalho Chehab 8a36ecf0f4 V4L/DVB (4475): Fix most Compat32 stuff on V4L2
Tested on x64 with a bttv board. Most Get ioctls are fixed. The only
non-completely working one is VIDIOCGAUDIO. All other IOR ioctls give the
same results on x86_64 and i386 architectures.
Thanks to Alastair Poole <netstar@gatheringofgray.com> for part of this
patch and tests on ppc64.

Signed-off-by: Alastair Poole <netstar@gatheringofgray.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 11:53:51 -03:00
Mauro Carvalho Chehab 3702627899 V4L/DVB (4474): On some cases, depth were not returned.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 11:53:49 -03:00
Patrick Boettcher a202a5bfb6 V4L/DVB (4472): Remove debug-print from dib3000mc
Removed and commented a small debug function.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 11:53:49 -03:00
matthieu castet 294d83d7fe V4L/DVB (4470): MT2060: turn on the VGA
The VGA was not turned on after calling sleep. This lead to bad performance in difficult areas.

Signed-off-by: matthieu castet <castet.matthieu@free.fr>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 11:53:48 -03:00
Patrick Boettcher 0f69e7f3f5 V4L/DVB (4468): Another fix for attaching the DiB3000MC
Another stupid fix for attaching the DiB3000MC. == 0 instead of != 0.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 11:53:48 -03:00
Patrick Boettcher 4e66c97c92 V4L/DVB: DiB3000MC: set FE to NULL after being freed
DiB3000MC: set FE to NULL after being freed

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 11:53:48 -03:00
Klaus Frahm a2c00a0eee V4L/DVB (4464): FIX_ AverTV A800 trouble
A new revision of the Avermedia A800 does not reenumerate after download the firmware.

Signed-off-by: Klaus Frahm <frahm@irsamc.ups-tlse.fr>
Signed-off-by: Martin Habbecke <M.Habbecke@gmx.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 11:53:47 -03:00
Patrick Boettcher 6c95f61bcb V4L/DVB (4463): New firmware for Nova-t-usb2
Thomas Rokamp and others are reporting:
"I have now with success extracted a working firmware for the 93004 rev. C1A2."
This patch increments the firmware version to 2.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 11:53:47 -03:00
Patrick Boettcher 5a19f31216 V4L/DVB (4465): Attach the dib3000mc correctly
Flynn Marquardt found out that there is problem with the new dib3000mc-driver
when using with the real dib3000mc. It resulted in a segfault.
Fixed two things: use the correct I2C address and do not attach a tuner, when
the demod was previously failing.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 11:53:47 -03:00
Patrick Boettcher 42afd06170 V4L/DVB (4461): Added missing dibx000-common code and headers
The first commit omitted the common-code and header-files.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-26 11:53:46 -03:00