Enable non-blocking receive for drivers on mei bus, this allows checking
for data availability by mei client drivers. This is most effective for
fixed address clients, that lacks flow control.
This function adds new API function mei_cldev_recv_nonblock(), it
retuns -EGAIN if function will block.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the newer HW sports two interrupts causes we cannot
just simply acknowledge the interrupts directly in the quick handler
and store the cause in the member variable, as the cause
will be overridden upon next interrupt while the interrupt thread
was not yet scheduled handling the previous interrupt.
The simple fix is to disable interrupts in quick handler
and acknowledge and enabled them in the interrupt thread.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need to synchronize irqs before issuing reset to make sure that the
clients communication is concluded and doesn't leak to the reset flow
and confusing the state machine.
This issue is happening during suspend/resume stress testing.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add MEI Lewisburg PCH IDs for Purley based workstations.
Cc: <stable@vger.kernel.org> # 4.8.x
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pm_runtime_autosuspend can take synchronous or asynchronous
paths, Because we are calling pm_runtime_mark_last_busy just before
this most of the cases it takes the asynchronous way. However,
when the FW or driver resets during already running runtime suspend,
the call will result in calling to the driver's rpm callback and results
in a deadlock on device_lock.
The simplest fix is to replace pm_runtime_autosuspend with
asynchronous pm_request_autosuspend.
Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Split callbacks for RX and async notification events on mei bus to
eliminate synchronization problems and to open way for RX optimizations.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change life time of the client pointer, allocate it upon client device
creation and free it upon device destruction, instead of upon
connection and disconnection.
This helps to eliminate racy NULL checks in the bus code.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a new host client state, MEI_FILE_UNINITIALIZED,
to distinguish client objects that was unlinked,
but not destroyed and can be linked again.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parameter renaming to fop_type was not reflected in KDoc
Fixes: 3030dc0564 (mei: add wrapper for queuing control commands)
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The write buffer should not by modified so make it constant. Also
hitchhike some style fixes on the way in the interface and rename
mei_me_write_message to mei_me_hbuf_write for consistency.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A cb is always placed on the completion queue
during discarding queue. Hence this can be performed
upon discard.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tell the FW that we are running a sane OS and TPM2_ChangeEPS()
is supported. This workaround was added to support other broken OS
and we need to follow here. The command is sent just once at the boot time.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prepare the client write functions to set the internal flag in message
header. Carry both blocking and internal modes inside the transmit cb,
and call internal bus function __mei_cl_send() with send mode bit mask.
The Internal flag should be added only on messages generated by the
driver.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NFC version reply size checked against only header size, not against
full message size. That may lead potentially to uninitialized memory access
in version data.
That leads to warnings when version data is accessed:
drivers/misc/mei/bus-fixup.c: warning: '*((void *)&ver+11)' may be used uninitialized in this function [-Wuninitialized]: => 212:2
Reported in
Build regressions/improvements in v4.9-rc3
https://lkml.org/lkml/2016/10/30/57
Fixes: 59fcd7c63a (mei: nfc: Initial nfc implementation)
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A mei client driver on the mei client bus can call disconnect function on
already internal disconnected client. A client can disconnect internally,
for example, during link reset or upon FW request. Those are legitimate
flows and we should not log an error message, hence we demote
'Already disconnected' message to the debug level.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The HBM protocol version is negotiated during the setup phase, then settled
on a highest possible common version of the driver and the firmware.
The sysfs API advertises both negotiated and driver supported versions
in the device attributes.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need the binder patches in here to build on for other submitted
patches to apply properly.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The callback context is redunant as all the information can be
retrived from the device struture of its private data.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
SEC registers are not accessible when the TXE device is in low power
state, hence the SEC interrupt cannot be processed if device is not
awake.
In some rare cases entrance to low power state (aliveness off) and input
ready bits can be signaled at the same time, resulting in communication
stall as input ready won't be signaled again after waking up. To resolve
this IPC_HHIER_SEC bit in HHISR_REG should not be cleaned if the
interrupt is not processed.
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The stall timer worker checks periodically if there is a stalled i/o
transaction. The issue with the current implementation is that the timer
is ticking also when there is no pending i/o transaction.
This patch provides a simple change that prevents rescheduling
of the delayed work when there is no pending i/o.
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device lock was unnecessary obtained in bus rescan work before the
amthif client search. That causes incorrect lock ordering and task
hang:
...
[88004.613213] INFO: task kworker/1:14:21832 blocked for more than 120 seconds.
...
[88004.645934] Workqueue: events mei_cl_bus_rescan_work
...
The correct lock order is
cl_bus_lock
device_lock
me_clients_rwsem
Move device_lock into amthif init function that called
after me_clients_rwsem is released.
This fixes regression introduced by commit:
commit 025fb792ba ("mei: split amthif client init from end of clients enumeration")
Cc: <stable@vger.kernel.org> # 4.6+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mei_amthif_read have only one difference from mei_read, it is not
calling mei_read_start().
Make mei_read_start return immediately for amthif client and drop the
special mei_amthif_read function.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The FW supports only one pending read per host client, in order to
support issuing of consecutive reads the driver queues read requests
internally and send them to the firmware after pending one has
completed.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enclose the boiler plate code of allocating a control/hbm command cb
and enqueueing it onto ctrl_wr.list in a convenient wrapper
mei_cl_enqueue_ctrl_wr_cb().
This is a preparatory patch for enabling consecutive reads.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the introduction of the receive control flow credits prefixed with
rx_ we add tx_ prefix to the variables and function used for tracking
the transmit control flow credits.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use RX flow control counter in the host client structure to
track the number of simultaneous outstanding reads.
This eliminates search in queues and makes ground for
enabling for parallel read.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The read callbacks for the fixed address clients, that don't have flow
control are built now on the receive path. In order to have a single
allocation place we remove the allocation from the read request.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The read callback is always prepared with MTU-sized buffer and the FW
can't send more than the MTU in one message.
Checking for buffer existence and krealloc to increase receive buffer
size are redundant and may be safely discarded.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Open code mei_clear_lists into its only caller mei_amthif_releas
and drop unused parameter 'dev' form from mei_clear_list function.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Fixed address clients do not work with the flow control, and the
packet RX callback was allocated upon TX with anticipation of a
following RX. This won't work if the clients with unsolicited Rx. Rather
than preparing read callback upon a write we allocate one directly on
the reciev path if one doesn't exists.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Store the file associated with a client in the host client structure,
this enables dropping the special amthif client file pointer from struct
mei_device, and this is also a preparation for changing the way rx
packet allocation for fixed_address clients
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move read cb to the completion queue if a read finds out that client
is not connected. This expedite user space reader wake on error
condition.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct errno on client disconnection is -ENODEV not -EBUSY
Cc: <stable@vger.kernel.org> #4.3+
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the course of the read flow we want to wait for read completion only
if the read queue is empty.
However the calling list_empty(&cl->rd_completed) is a duplication as the
same check was performed by mei_cl_read_cb() and the waiting is skipped
if it returns not NULL.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In mei_hbm_cl_hdr buf argument was not described
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Schedule link reset if failed to perform runtime suspend or resume.
Set active runtime pm stte on link reset
to clean runtimr pm error, if present.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mei_io_cb_alloc_buf have a single caller :mei_cl_alloc_cb. After amthif
stopped using it, the code can be integrated into the caller and the
function can be dropped.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use mei_cl_alloc_cb wrapper instead of open code steps
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Incorporate the mei_amthif_send_cmd code into its only caller:
mei_amthif_run_next_cmd
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the poll function is bailing early for amthif client and
ignores requests for async events notifications.
Move async event processing before amthif to enable async events
notifications on amthif client.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iamthif_current_cb was used in request cancel in amthif code.
Now a canceled request is discarded only at the end of the processing
and the variable lost its purpose and can be safely removed.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, all requests cancelled by the user are immediately removed
from the queues. Such removal can cause unexpected behavior in the case
when a request is partially written or a reply is received after the
request is cancelled. To resolve this a request is always fully
processed and the result is discarded in case the request was canceled.
This completes the partial fix in commit:
9d04ee1 ("mei: amthif: discard not read messages")
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AMTHIF code now uses read completed queue to store replies from the FW.
It is possible to send the next request as soon as a read from the FW is
completed. With these changes we don't need the READ_COMPLETE state.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sunrise Point PCH with SPS Firmware doesn't expose working
MEI interface, we need to quirk it out.
The SPS Firmware is identifiable only on the first PCI function
of the device.
Cc: <stable@vger.kernel.org> #4.6+
Tested-by: Sujith Pandel <sujith_pandel@dell.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wr_ctrl waiters are none interruptible, so should be waken up
with call to wake_up and not to wake_up_interruptible.
This fixes commit:
7ff4bdd ("mei: fix waiting for wr_ctrl for corner cases.")
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Usyskin