These offsets are not used, and in some cases are completely reserved
even in the spec, but I'm adding them for completeness just to match
the diagrams in the spec, e.g., PCIe spec r3.0, sec 7.8.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The convention of showing bits in a mask of the full register width, e.g.,
"0x00000007" instead of "0x07" for a field in a 32-bit register, is common
but not universal in this file. This patch makes it consistently used at
least for the PCIe capability.
Whitespace and zero-extension changes only; no functional change.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
pci_pcie_cap2() was replaced by pcie_capability_read_word() and similar
functions, so update the comment.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The PCI_EXP_TYPE_PCI_BRIDGE is a *PCIe* function that is a bridge to
PCI/PCI-X. See PCIe spec r3.0, sec 7.8.2.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
All other PCIe capability register fields include "PCI_EXP" + <reg-name> +
<field-name>. This renames PCI_EXP_OBFF_MASK, PCI_EXP_IDO_REQ_EN,
PCI_EXP_LTR_EN, and related fields using the same convention.
No functional change.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com> # for MFD driver
This doesn't change any existing symbols, but it puts them in logical
order and uses explicit masks instead of shifts, like the rest of the
file.
It also adds new symbols for PCI_MSIX_TABLE_BIR,
PCI_MSIX_TABLE_OFFSET, PCI_MSIX_PBA_BIR, and PCI_MSIX_PBA_OFFSET to
replace the mis-named PCI_MSIX_FLAGS_BIRMASK (the BAR index fields
are part of the Table and PBA registers, not the flags register).
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add standard #defines for the Supported Link Speeds field in the PCIe
Link Capabilities register.
Note that prior to PCIe spec r3.0, these encodings were defined:
0001b 2.5GT/s Link speed supported
0010b 5.0GT/s and 2.5GT/s Link speed supported
Starting with spec r3.0, these encodings refer to bits 0 and 1 in the
Supported Link Speeds Vector in the Link Capabilities 2 register, and bits
0 and 1 there mean 2.5 GT/s and 5.0 GT/s, respectively. Therefore, code
that followed r2.0 and interpreted 0x1 as 2.5GT/s and 0x2 as 5.0GT/s will
continue to work, and we can identify a device using the new encodings
because it will have a non-zero Link Capabilities 2 register.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* pci/bjorn-pcie-cap:
ath9k: Use standard #defines for PCIe Capability ASPM fields
iwlwifi: Use standard #defines for PCIe Capability ASPM fields
iwlwifi: collapse wrapper for pcie_capability_read_word()
iwlegacy: Use standard #defines for PCIe Capability ASPM fields
iwlegacy: collapse wrapper for pcie_capability_read_word()
cxgb3: Use standard #defines for PCIe Capability ASPM fields
PCI: Add standard PCIe Capability Link ASPM field names
PCI/portdrv: Use PCI Express Capability accessors
PCI: Use standard PCIe Capability Link register field names
PCI: Add and use standard PCI-X Capability register names
Add standard #defines for ASPM fields in PCI Express Link Capability and
Link Control registers.
Previously we used PCIE_LINK_STATE_L0S and PCIE_LINK_STATE_L1 directly, but
these are defined for the Linux ASPM interfaces, e.g.,
pci_disable_link_state(), and only coincidentally match the actual register
bits. PCIE_LINK_STATE_CLKPM, also part of that interface, does not match
the register bit.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Add and use #defines for PCI-X Capability registers and fields.
Note that the PCI-X Capability has a different layout for
type 0 (endpoint) and type 1 (bridge) devices.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
According to the PCIe 3.0 spec, PCI_EXP_LNKCAP2_SLS_2_5GB is
1st bit of PCI_EXP_LNKCAP2 register, not 0th bit. So, the bit
definition of supported link speed vector should be fixed.
[bhelgaas: change "Current" to "Supported"]
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Dave Jones <davej@redhat.com>
Bjorn Helgaas