In the quest to remove all stack VLA usage from the kernel[1], this
uses the maximum allocation size for the stack and adds a sanity check,
similar to what has already be done for the regular rave-sp driver.
[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Submitters of device tree binding documentation may forget to CC
the subsystem maintainer if this is missing.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The previous documentation was wrongly stating about the order
of magnitude of CONVERT_V result files contents (vad, vdd).
This commit is correcting this.
Reported-by: Adam Stolarczyk <adam@stolarczyk.net.pl>
Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move open braces of two structs to the declaration line,
as criticized by checkpatch.
Signed-off-by: Henriette Hofmeier <passt@h-hofmeier.de>
Signed-off-by: Florian Harbecke <florian.harbecke@fau.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds support to stream support, this involve implementing
user specific implementation of Data channel management and channel
management SLIMbus messages.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds support to SLIMbus stream apis for slimbus device.
SLIMbus streaming involves adding support to Data Channel Management and
channel Reconfiguration Messages to slim core plus few stream apis.
>From slim device side the apis are very simple mostly inline with other
stream apis.
Currently it only supports Isochronous and Push/Pull transport protocols,
which are sufficient for audio use cases.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds suppor to Qualcomm SLIMBus Non-Generic Device (NGD)
controller driver.
This is light-weight SLIMBus controller driver responsible for
communicating with slave HW directly over the bus using messaging
interface, and communicating with master component residing on ADSP
for bandwidth and data-channel management
Based on intial work from
Karthikeyan Ramasubramanian <kramasub@codeaurora.org> and
Sagar Dharia <sdharia@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Craig Tatlor <ctatlor97@gmail.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds bindings for Qualcomm SLIMBus NGD controller.
SLIMBus NGD controller is a light-weight driver responsible for
communicating with SLIMBus slaves directly over the bus using messaging
interface and communicating with master component residing on ADSP for
bandwidth and data-channel management
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Craig Tatlor <ctatlor97@gmail.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds slim_alloc_txn_tid() and slim_free_txn_tid() api
to allow controllers like ngd to allocate tids for user specific
commands. This also cleans up the existing code to use single place
for tid allocations and free.
This patch also make the tid allocation cyclic one, its very useful
to track the transactions back during debug.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rearrange struct slim_eaddr so that the structure is packed correctly
to be able to send in SLIMBus messages.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On SLIMBus controllers like Qcom NGD(non ported device), controller
can request logical address once the remote side is powered, having a
helper function like this to explicitly enumerate the bus is helpful.
Also codec drivers which are taking to interface device would need
such a helper too.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
QCOM SLIMBus controller is already under a 'if SLIMBUS' in Kconfig,
having depends on SLIMBUS is totally redundant. Just remove it.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
slim_val_inf can contain random value from stack, make sure the completion
is initialized to NULL while filling the msg.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There seems to be a multiple calls to pm_runtime_mark_last_busy(),
which looks like a typo.
Fix this by properly adding pm_runtime_put_autosuspend to put controller
in auto suspend state.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There seems to be a typo while filling msg for slim_write, wbuf is
set to NULL instead of rbuf.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When ioremap_nocache fails, the lack of error-handling code may
cause unexpected results.
This patch adds error-handling code after calling ioremap_nocache.
Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com>
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Minor fixes including:
* fix some typos
* correct use of a/an
* rephrase explanation of .state ops function
* s/re-use/reuse/ (use only one spelling of 'reuse' in these docs)
* s/cpu/CPU/
Signed-off-by: Alan Tull <atull@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the vendor-prefix reject file which was accidentally added when
merging the gnss sirfstar binding. The wi2wi prefix had already been
added by commit a593bff82c ("dt-bindings: define vendor prefix for
Wi2Wi, Inc.").
Fixes: 176193b7dd ("dt-bindings: gnss: add sirfstar binding")
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to enable the clock before registering regions and exporting
partitions to user space at which point we must be prepared for I/O.
Fixes: ee895ccdf7 ("misc: sram: fix enabled clock leak on error path")
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to disable clocks and deregister any exported partitions
before returning on late probe errors.
Note that since commit ee895ccdf7 ("misc: sram: fix enabled clock leak
on error path"), partitions are deliberately exported before enabling
the clock so we stick to that logic here. A follow up patch will address
this.
Fixes: 2ae2e28852 ("misc: sram: add Atmel securam support")
Cc: stable <stable@vger.kernel.org> # 4.9
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ME FW version is constantly used by detection and update tools.
To improve the reliability and simplify these tools provide
a sysfs interface to access version of the platform ME firmware
in the following format:
<platform>:<major>.<minor>.<milestone>.<build>.
There can be up to three such blocks for different FW components.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add optional timeout to internal bus recv function to
enable break out of internal flows in case of no answer from FW.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MEI_IAMTHIF_STALL_TIMER is unused now and can be safely removed.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Hyper-V feature and hint flags in hyperv-tlfs.h are all defined
with the string "X64" in the name. Some of these flags are indeed
x86/x64 specific, but others are not. For the ones that are used
in architecture independent Hyper-V driver code, or will be used in
the upcoming support for Hyper-V for ARM64, this patch removes the
"X64" from the name.
This patch changes the flags that are currently known to be
used on multiple architectures. Hyper-V for ARM64 is still a
work-in-progress and the Top Level Functional Spec (TLFS) has not
been separated into x86/x64 and ARM64 areas. So additional flags
may need to be updated later.
This patch only changes symbol names. There are no functional
changes.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit ea81fdf098 ("Tools: hv: vss: Skip freezing filesystems backed by
loop") added skip for filesystems backed by loop device. However, it seems
the detection of such cases is incomplete.
It was found that with 'devicemapper' storage driver docker creates the
following chain:
NAME MAJ:MIN
loop0 7:0
..docker-8:4-8473394-pool 253:0
..docker-8:4-8473394-eac... 253:1
so when we're looking at the mounted device we see major '253' and not '7'.
Solve the issue by walking /sys/dev/block/*/slaves chain and checking if
there's a loop device somewhere.
Other than that, don't skip mountpoints silently when stat() fails. In case
e.g. SELinux is failing stat we don't want to skip freezing everything
without letting user know about the failure.
Fixes: ea81fdf098 ("Tools: hv: vss: Skip freezing filesystems backed by loop")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Python3 changed the way how 'print' works.
Adjust the code to a syntax that is understood by python2 and python3.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In architecture independent code for manipulating Hyper-V synthetic timers
and synthetic interrupts, pass in an ordinal number identifying the timer
or interrupt, rather than an actual MSR register address. Then in
x86/x64 specific code, map the ordinal number to the appropriate MSR.
This change facilitates the introduction of an ARM64 version of Hyper-V,
which uses the same synthetic timers and interrupts, but a different
mechanism for accessing them.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I didn't really hit a real bug, but just happened to spot the bug:
we have decreased the counter at the beginning of vmbus_process_offer(),
so we mustn't decrease it again.
Fixes: 6f3d791f30 ("Drivers: hv: vmbus: Fix rescind handling issues")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: stable@vger.kernel.org
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Stable <stable@vger.kernel.org> # 4.14 and above
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add comments describing intricacies of Hyper-V ring buffer
signaling code. This information is not in Hyper-V public
documents, so include here to capture the knowledge for
future coders.
There are no code changes in this commit.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add standard interrupt handler annotations to
hyperv_vector_handler(). This does not fix any observed
bug, but avoids potential removal of the code by link
time optimization and makes it consistent with
hv_stimer0_vector_handler in the same source file.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Recent kernels support asynchronous probing; most hyperv drivers
can be probed async easily so set the required flag for this.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable csrval_len is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'csrval_len' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pointer dev is being assigned but is never used hence it is redundant
and can be removed.
Cleans up clang warning:
warning: variable ‘dev’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pointer hpet is being assigned but is never used hence it is redundant
and can be removed.
Cleans up clang warning:
warning: variable 'hpet' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tasklet goldfish_interrupt_tasklet is local to the source and
does not need to be in global scope, so make it static.
Cleans up sparse warning:
symbol 'goldfish_interrupt_tasklet' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable extra_config is local to the source and does not
need to be in global scope, so make it static.
Cleans up sparse warning:
warning: symbol 'extra_config' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several helper functions are local to the source and do not
need to be in global scope, so make them static.
Cleans up sparse warnings:
symbol 'rtsx_pm_power_saving' was not declared. Should it be static?
symbol 'rtsx_set_l1off_sub_cfg_d0' was not declared. Should it be static?
symbol 'rtsx_pm_full_on' was not declared. Should it be static?
symbol 'rtsx_comm_set_ltr_latency' was not declared. Should it be static?
symbol 'rtsx_pci_process_ocp' was not declared. Should it be static?
symbol 'rtsx_pci_process_ocp_interrupt' was not declared. Should it be
static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable is_local is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'is_local' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable type is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'type' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pointers ch and rp are set but are never used hence they are
redundant and can be removed.
Cleans up clang warnings:
warning: variable 'ch' set but not used [-Wunused-but-set-variable]
warning: variable 'rp' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variables val16, type, pci_dev and type are set but are never used
hence they are redundant and can be removed.
Cleans up clang warnings:
warning: variable 'type' set but not used [-Wunused-but-set-variable]
warning: variable 'val16' set but not used [-Wunused-but-set-variable]
warning: variable 'pci_dev' set but not used [-Wunused-but-set-variable]
warning: variable 'type' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Philip Moltman is no longer a maintainer of the VMware balloon. Setting
Nadav Amit as one instead.
Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removing the GPL wording and replace it with an SPDX tag. The immediate
trigger for doing it now is the need to remove the list of maintainers
from the source file, as the maintainer list changed.
Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 33d268ed00 ("VMware balloon: Do not limit the amount of
frees and allocations in non-sleep mode."), the allocations are not
increased, and therefore balloon inflation rate limiting is in practice
broken.
While we can restore rate limiting, in practice we see that it can
result in adverse effect, as the hypervisor throttles down the VM if it
does not respond well enough, or alternatively causes it to perform very
poorly as the host swaps out the VM memory. Throttling the VM down can
even have a cascading effect, in which the VM reclaims memory even
slower and consequentially throttled down even further.
We therefore remove all the rate limiting mechanisms, including the slow
allocation cycles, as they are likely to do more harm than good.
Fixes: 33d268ed00 ("VMware balloon: Do not limit the amount of frees and allocations in non-sleep mode.")
Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, when all modules, including VMCI and VMware balloon are built
into the kernel, the initialization of the balloon happens before the
VMCI is probed. As a result, the balloon fails to initialize the VMCI
doorbell, which it uses to get asynchronous requests for balloon size
changes.
The problem can be seen in the logs, in the form of the following
message:
"vmw_balloon: failed to initialize vmci doorbell"
The driver would work correctly but slightly less efficiently, probing
for requests periodically. This patch changes the balloon to be
initialized using late_initcall() instead of module_init() to address
this issue. It does not address a situation in which VMCI is built as a
module and the balloon is built into the kernel.
Fixes: 48e3d668b7 ("VMware balloon: Enable notification via VMCI")
Cc: stable@vger.kernel.org
Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When vmballoon_vmci_init() sets a doorbell using VMCI_DOORBELL_SET, for
some reason it does not consider the status and looks at the result.
However, the hypervisor does not update the result - it updates the
status. This might cause VMCI doorbell not to be enabled, resulting in
degraded performance.
Fixes: 48e3d668b7 ("VMware balloon: Enable notification via VMCI")
Cc: stable@vger.kernel.org
Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the hypervisor sets 2MB batching is on, while batching is cleared,
the balloon code breaks. In this case the legacy mechanism is used with
2MB page. The VM would report a 2MB page is ballooned, and the
hypervisor would only take the first 4KB.
While the hypervisor should not report such settings, make the code more
robust by not enabling 2MB support without batching.
Fixes: 365bd7ef7e ("VMware balloon: Support 2m page ballooning.")
Cc: stable@vger.kernel.org
Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook