We can't allocate he->srcline unconditionaly, only when new hist_entry
is created. Moving he->srcline allocation into hist_entry__init
function.
Original-patch-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Nageswara R Sastry <nasastry@in.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lkml.kernel.org/r/20190305152536.21035-4-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding error path into hist_entry__init to unify error handling, so
every new member does not need to free everything else.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: nageswara r sastry <nasastry@in.ibm.com>
Link: http://lkml.kernel.org/r/20190305152536.21035-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ravi Bangoria reported that we fail with an empty NUMA node with the
following message:
$ lscpu
NUMA node0 CPU(s):
NUMA node1 CPU(s): 0-4
$ sudo ./perf c2c report
node/cpu topology bugFailed setup nodes
Fix this by detecting the empty node and keeping its CPU set empty.
Reported-by: Nageswara R Sastry <nasastry@in.ibm.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190305152536.21035-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python2 and Python3 in the intel-pt-events.py script
There may be differences in the ordering of output lines due to
differences in dictionary ordering etc. However the format within lines
should be unchanged.
The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6
Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/fd26acf9-0c0f-717f-9664-a3c33043ce19@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python2 and Python3 in the event_analyzing_sample.py script
There may be differences in the ordering of output lines due to
differences in dictionary ordering etc. However the format within lines
should be unchanged.
The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6
Signed-off-by: Tony Jones <tonyj@suse.de>
Cc: Feng Tang <feng.tang@intel.com>
Link: http://lkml.kernel.org/r/20190302011903.2416-5-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python 2 and Python 3 in the check-perf-trace.py script.
There may be differences in the ordering of output lines due to
differences in dictionary ordering etc. However the format within lines
should be unchanged.
The use of from __future__ implies the minimum supported version of
Python2 is now v2.6
Signed-off-by: Tony Jones <tonyj@suse.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/r/20190302011903.2416-4-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python2 and Python3 in the futex-contention.py script
There may be differences in the ordering of output lines due to
differences in dictionary ordering etc. However the format within lines
should be unchanged.
The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6
Signed-off-by: Tony Jones <tonyj@suse.de>
Link: http://lkml.kernel.org/r/20190302011903.2416-3-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Remove mixed indentation in Python scripts. Revert to either all tabs
(most common form) or all spaces (4 or 8) depending on what was the
intent of the original commit. This is necessary to complete Python3
support as it will flag an error if it encounters mixed indentation.
Signed-off-by: Tony Jones <tonyj@suse.de>
Link: http://lkml.kernel.org/r/20190302011903.2416-2-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using the existing symbol_conf.pid_list_str and symbol_conf.tid_list_str
logic.
For example:
perf diff --tid 13965
It'll only diff the samples for thread 13965.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1551791143-10334-4-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To improve 'perf diff', implement a --cpu filter option.
Multiple CPUs can be provided as a comma-separated list with no space:
0,1. Ranges of CPUs are specified with -: 0-2. Default is to report
samples on all CPUs.
For example,
perf diff --cpu 0,1
It only diff the samples for CPU0 and CPU1.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1551791143-10334-3-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To improve 'perf diff', implement a --time filter option to diff the
samples within given time window.
It supports time percent with multiple time ranges. The time string
format is 'a%/n,b%/m,...' or 'a%-b%,c%-%d,...'.
For example:
Select the second 10% time slice to diff:
perf diff --time 10%/2
Select from 0% to 10% time slice to diff:
perf diff --time 0%-10%
Select the first and the second 10% time slices to diff:
perf diff --time 10%/1,10%/2
Select from 0% to 10% and 30% to 40% slices to diff:
perf diff --time 0%-10%,30%-40%
It also supports analysing samples within a given time window
<start>,<stop>.
Times have the format seconds.microseconds.
If 'start' is not given (i.e., time string is ',x.y') then analysis starts at
the beginning of the file.
If the stop time is not given (i.e, time string is 'x.y,') then analysis
goes to end of file.
Time string is 'a1.b1,c1.d1:a2.b2,c2.d2'. Use ':' to separate timestamps for
different perf.data files.
For example, we get the timestamp information from perf script.
perf script -i perf.data.old
mgen 13940 [000] 3946.361400: ...
perf script -i perf.data
mgen 13940 [000] 3971.150589 ...
perf diff --time 3946.361400,:3971.150589,
It analyzes the perf.data.old from the timestamp 3946.361400 to the end of
perf.data.old and analyzes the perf.data from the timestamp 3971.150589 to the
end of perf.data.
v4:
---
Update abstime_str_dup(), let it return error if strdup
is failed, and update __cmd_diff() accordingly.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1551791143-10334-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a utility function to fetch executable code. Convert one
user over to it. There are more places doing that, but they
do significantly different actions, so they are not
easy to fit into a single library function.
Committer changes:
. No need to cast around, make 'buf' be a void pointer.
. Rename it to thread__memcpy() to reflect the fact it is about copying
a chunk of memory from a thread, i.e. from its address space.
. No need to have it in a separate object file, move it to thread.[ch]
. Check the return of map__load(), the original code didn't do it, but
since we're moving this around, check that as well.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20190305144758.12397-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Delete a superfluous semicolon in getBPFObjectFromModule().
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Wei <albin_yang@163.com>
Link: http://lkml.kernel.org/r/1551710174-3349-1-git-send-email-albin_yang@163.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The libbpf loader expects that some __btf_map_<MAP_NAME> structs be in
place with the keys and values types of maps so that one can store the
struct definitions and have them sent to the kernel via sys_bpf(fd, cmd
= BTF_LOAD) and then later be retrievable via sys_bpf(fd, cmd =
BPF_OBJ_GET_INFO_BY_FD) for use by tools such as 'bpftool map dump id
MAP_ID'.
Since we already have this for defining maps in 'perf trace' BPF events:
bpf_map(name, _type, type_key, type_val, _max_entries)
As used in the tools/perf/examples/bpf/augmented_raw_syscalls.c:
--- 8< ---
struct syscall {
bool enabled;
};
bpf_map(syscalls, ARRAY, int, struct syscall, 512);
--- 8< ---
All we need is to get all that already available info, piggyback on the
'bpf_map' define in tools/perf/include/bpf/bpf.h, that is included by
'perf trace' BPF programs and do that without requiring changes to the
BPF programs already defining maps using 'bpf_map()'.
So this is what we have before this patch:
1) With this in ~/.perfconfig to dump .c events as .o, aka save a copy
so that we can use the .o later as a pre-compiled BPF bytecode:
# grep '\[llvm\]' -A2 ~/.perfconfig
[llvm]
dump-obj = true
clang-opt = -g
#
# clang --version
clang version 9.0.0 (https://git.llvm.org/git/clang.git/ 7906282d3afec5dfdc2b27943fd6c0309086c507) (https://git.llvm.org/git/llvm.git/ a1b5de1ff8ae8bc79dc8e86e1f82565229bd0500)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/llvm/bin
2) Note the -g there so that we get clang to generate debuginfo, and
since the target is 'bpf' it will generate the BTF info in this
clang version (9.0).
3) Run a simple 'perf record' specifiying as an event the augmented_raw_syscalls.c
source code:
# perf record -e /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c sleep 1
LLVM: dumping /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.025 MB perf.data ]
# file /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o: ELF 64-bit LSB relocatable, eBPF, version 1 (SYSV), with debug_info, not stripped
4) Look at the BTF structs encoded in it:
# pahole -F btf --sizes /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
syscall_enter_args 64 0
augmented_filename 264 0
syscall 1 0
syscall_exit_args 24 0
bpf_map 28 0
#
# pahole -F btf -C syscalls /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
# pahole -F btf -C syscall /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
struct syscall {
bool enabled; /* 0 1 */
/* size: 1, cachelines: 1, members: 1 */
/* last cacheline: 1 bytes */
};
#
5) Ok, with just this we don't have the markers expected by the libbpf
loader and when we run with this BPF bytecode, because we have:
# grep '\[trace\]' -A1 ~/.perfconfig
[trace]
add_events = /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
#
6) Lets do a 'perf trace' system wide session using this BPF program:
# perf trace -e *mmsg,open*
Cache2 I/O/6885 openat(AT_FDCWD, "/home/acme/.cache/mozilla/firefox/ina67tev.default/cache2/entries/BA220AB2914006A7AE96D27BE6EA13DD77519FCA", O_RDWR|O_CREAT|O_TRUNC, S_IRUSR|S_IWUSR) = 106
Cache2 I/O/6885 openat(AT_FDCWD, "/proc/self/mountinfo", O_RDONLY) = 121
Cache2 I/O/6885 openat(AT_FDCWD, "/proc/self/mountinfo", O_RDONLY) = 121
Cache2 I/O/6885 openat(AT_FDCWD, "/proc/self/mountinfo", O_RDONLY) = 121
Cache2 I/O/6885 openat(AT_FDCWD, "/proc/self/mountinfo", O_RDONLY) = 121
DNS Res~ver #3/23340 openat(AT_FDCWD, "/etc/hosts", O_RDONLY|O_CLOEXEC) = 106
DNS Res~ver #3/23340 sendmmsg(106<socket:[3482690]>, 0x7f252f1fcaf0, 2, MSG_NOSIGNAL) = 2
Cache2 I/O/6885 openat(AT_FDCWD, "/home/acme/.cache/mozilla/firefox/ina67tev.default/cache2/entries/BA220AB2914006A7AE96D27BE6EA13DD77519FCA", O_RDWR) = 106
lighttpd/18915 openat(AT_FDCWD, "/proc/loadavg", O_RDONLY) = 12
7) While it runs lets see the maps that 'perf trace' + libbpf's BPF
loader loaded into the kernel via sys_bpf(fd, BPF_BTF_LOAD, ...):
# bpftool map list | tail -6
149: perf_event_array name __augmented_sys flags 0x0
key 4B value 4B max_entries 8 memlock 4096B
150: array name syscalls flags 0x0
key 4B value 1B max_entries 512 memlock 8192B
151: hash name pids_filtered flags 0x0
key 4B value 1B max_entries 64 memlock 8192B
#
8) Dump the "pids_filtered", map, that will have one entry per PID that
'perf trace' wants filtered, which includes its own, to avoid a
tracing feedback loop (perf trace shows the syscalls it does which
generates more syscalls that it has to show that...), it also
auto-filters the 'gnome-terminal' and 'sshd' parent PIDs, for the
same reason:
# bpftool map dump id 151
key: a5 0c 00 00 value: 01
key: 14 63 00 00 value: 01
Found 2 elements
#
9) Since there is no BTF info available, it does a generic hex dump :-\
10) Now, with this patch applied, we'll do steps 3 to 6 again and look
with pahole if there are extra structs encoded in BTF:
# pahole -F btf --sizes /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
syscall_enter_args 64 0
augmented_filename 264 0
syscall 1 0
syscall_exit_args 24 0
bpf_map 28 0
____btf_map___augmented_syscalls__ 8 0
____btf_map_syscalls 8 0
____btf_map_pids_filtered 8 0
#
11) Yes, those __btf_map_ + the map names, lets see how they look like:
# pahole -F btf -C ____btf_map_syscalls /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
struct ____btf_map_syscalls {
int key; /* 0 4 */
struct syscall value; /* 4 1 */
/* size: 8, cachelines: 1, members: 2 */
/* padding: 3 */
/* last cacheline: 8 bytes */
};
#
12) Lets repeat step 7 to get the new map ids:
# bpftool map list | tail -6
155: perf_event_array name __augmented_sys flags 0x0
key 4B value 4B max_entries 8 memlock 4096B
156: array name syscalls flags 0x0
key 4B value 1B max_entries 512 memlock 8192B
157: hash name pids_filtered flags 0x0
key 4B value 1B max_entries 64 memlock 8192B
#
13) And finally lets dump the 'pids_filtered':
# bpftool map dump id 157
[{
"key": 3237,
"value": true
},{
"key": 26435,
"value": true
}
]
#
Looks much better! BTF info was used to interpret the key as an integer
and the value as a struct with just one boolean member, so to make it
more compact, show just the 'true' value where we saw '01'.
Now to make 'perf trace --dump-map' to use BTF!
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-ybuf9wpkm30xk28iq7jbwb40@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out a base class CallGraphModelBase from CallGraphModel, so that
CallGraphModelBase can be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lkml.kernel.org/n/tip-76eybebzjwvgnadkm2oufrqi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of passing the tree root, get it from a method that can be
implemented in any derived class.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lkml.kernel.org/n/tip-ovcv28bg4mt9swk36ypdyz14@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out a base class TreeWindowBase from CallGraphWindow, so that
TreeWindowBase can be reused.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lkml.kernel.org/n/tip-ifirw0c0mhkwxg6l12lk6k4p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Export to the 'calls' table the newly created 'parent_id' and create an
index for it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lkml.kernel.org/n/tip-eybd6fnk6j9r7g643lsideoo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix SQL query error "invalid input syntax for integer":
Traceback (most recent call last):
File "tools/perf/scripts/python/export-to-postgresql.py", line 465, in <module>
do_query(query, 'CREATE VIEW calls_view AS '
File "tools/perf/scripts/python/export-to-postgresql.py", line 274, in do_query
raise Exception("Query failed: " + q.lastError().text())
Exception: Query failed: ERROR: invalid input syntax for integer: ""
LINE 1: ...ch_count,call_id,return_id,CASE WHEN flags=0 THEN '' WHEN fl...
^
(22P02) QPSQL: Unable to create query
Error running python script tools/perf/scripts/python/export-to-postgresql.py
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Fixes: f08046cb30 ("perf thread-stack: Represent jmps to the start of a different symbol")
Link: https://lkml.kernel.org/n/tip-strfpdozrvg7bi1xzrivxzqt@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Export to the 'calls' table the newly created 'parent_id'.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lkml.kernel.org/n/tip-b09oukl48rsl9azkp2wmh0bl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The call_path can be used to find the parent symbol for a call but not
the exact parent call. To do that add parent_id to the call_return
export. This enables the creation of a call tree from the exported data.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lkml.kernel.org/n/tip-6j7tzdxo67cox6kan7k22oo6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When TSC is not available, "timeless" decoding is used but a divide by
zero occurs if perf_time_to_tsc() is called.
Ensure the divisor is not zero.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.9+
Link: https://lkml.kernel.org/n/tip-1i4j0wqoc8vlbkcizqqxpsf4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The message does not indicate the possibility that the symbol is not
found because the file does not exist.
Before:
$ perf record -e intel_pt//u --filter 'filter strcmp / strcpy @ foo ' ls
Symbol 'strcmp' not found.
Note that symbols must be functions.
Failed to parse address filter: 'filter strcmp / strcpy @ foo '
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
After:
$ perf record -e intel_pt//u --filter 'filter strcmp / strcpy @ foo ' ls
File 'foo' not found or has no symbols.
Symbol 'strcmp' not found.
Note that symbols must be functions.
Failed to parse address filter: 'filter strcmp / strcpy @ foo '
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
Reported-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lkml.kernel.org/n/tip-dvngzxd0jkplzw1ary69dilb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch fixes the following warning:
kernel/events/core.c: In function ‘perf_event_parse_addr_filter’:
kernel/events/core.c:9154:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
kernel = 1;
~~~~~~~^~~
kernel/events/core.c:9156:3: note: here
case IF_SRC_FILEADDR:
^~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190212205430.GA8446@embeddedor
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix buffer overflow observed when running perf test.
The overflow is when trying to evaluate "1ULL << (64 - 1)" which is
resulting in -9223372036854775808 which overflows the 20 character
buffer.
If is possible this bug has been reported before but I still don't see
any fix checked in:
See: https://www.spinics.net/lists/linux-perf-users/msg07714.html
Reported-by: Michael Sartain <mikesart@fastmail.com>
Reported-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Fixes: f7d82350e5 ("tools/events: Add files to create libtraceevent.a")
Link: http://lkml.kernel.org/r/20190228015532.8941-1-tonyj@suse.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf probe' supports using just the kernel module name, but that will
work only when the module is loaded, or using the full pathname to the
file with the DWARF debug info, but the warning was cryptic:
Before:
# perf probe -m cls_flower -L fl_change
Failed to find the path for cls_flower: No such file or directory
Error: Failed to show lines.
#
After:
# perf probe -m cls_flower -L fl_change
Module cls_flower is not loaded, please specify its full path name.
Error: Failed to show lines.
# perf probe -m /lib/modules/5.0.0-rc7+/kernel/net/sched/cls_flower.ko -L fl_change | head -7
<fl_change@/home/acme/git/linux/net/sched/cls_flower.c:0>
0 static int fl_change(struct net *net, struct sk_buff *in_skb,
struct tcf_proto *tp, unsigned long base,
u32 handle, struct nlattr **tca,
void **arg, bool ovr, struct netlink_ext_ack *extack)
4 {
5 struct cls_fl_head *head = rtnl_dereference(tp->root);
#
The behaviour doesn't change when the module is loaded:
# modprobe cls_flower
# perf probe -m cls_flower -L fl_change | head -7
<fl_change@/home/acme/git/linux/net/sched/cls_flower.c:0>
0 static int fl_change(struct net *net, struct sk_buff *in_skb,
struct tcf_proto *tp, unsigned long base,
u32 handle, struct nlattr **tca,
void **arg, bool ovr, struct netlink_ext_ack *extack)
4 {
5 struct cls_fl_head *head = rtnl_dereference(tp->root);
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marcelo Ricardo Leitner <mleitner@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-q4njvk9mshra00jacqjbzfn5@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Events with attr.bpf_event set should be considered as side-band events,
as they carry information about BPF programs.
Signed-off-by: Song Liu <songliubraving@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Cc: netdev@vger.kernel.org
Fixes: 6ee52e2a3f ("perf, bpf: Introduce PERF_RECORD_BPF_EVENT")
Link: http://lkml.kernel.org/r/20190226002019.3748539-2-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf annotate:
Wei Li:
- Fix getting source line failure
perf script:
Andi Kleen:
- Handle missing fields with -F +...
perf data:
Jiri Olsa:
- Prep work to support per-cpu files in a directory.
Intel PT:
Adrian Hunter:
- Improve thread_stack__no_call_return()
- Hide x86 retpolines in thread stacks.
- exported SQL viewer refactorings, new 'top calls' report..
Alexander Shishkin:
- Copy parent's address filter offsets on clone
- Fix address filters for vmas with non-zero offset. Applies to
ARM's CoreSight as well.
python scripts:
Tony Jones:
- Python3 support for several 'perf script' python scripts.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXHRYNwAKCRCyPKLppCJ+
J8XmAQDKY7gb3GhkX+4aE8cGffFYB2YV5mD9Bbu4AM9tuFFBJwD+KAq87FMCy7m7
h7xyWk3UILpz6y235AVdfOmgcNDkpAQ=
=SJCG
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.1-20190225' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf annotate:
Wei Li:
- Fix getting source line failure
perf script:
Andi Kleen:
- Handle missing fields with -F +...
perf data:
Jiri Olsa:
- Prep work to support per-cpu files in a directory.
Intel PT:
Adrian Hunter:
- Improve thread_stack__no_call_return()
- Hide x86 retpolines in thread stacks.
- exported SQL viewer refactorings, new 'top calls' report..
Alexander Shishkin:
- Copy parent's address filter offsets on clone
- Fix address filters for vmas with non-zero offset. Applies to
ARM's CoreSight as well.
python scripts:
Tony Jones:
- Python3 support for several 'perf script' python scripts.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
perf report:
He Kuang:
- Don't shadow inlined symbol with different addr range.
perf script:
Jiri Olsa:
- Allow +- operator to ask for -F to add/remove fields to
the default set, for instance to ask for the removal of the
'cpu' field in tracepoint events, adding 'period' to that
kind of events, etc.
perf test:
Thomas Richter:
- Fix scheduler tracepoint signedness of COMM fields failure of
'evsel-tp-sched' test on s390 and other arches.
Tommi Rantala:
- Skip trace+probe_vfs_getname.sh when 'perf trace' is not built.
perf trace:
Arnaldo Carvalho de Melo:
- Add initial BPF map dumper, initially just for the current, minimal
needs of the augmented_raw_syscalls BPF example used to collect
pointer args payloads that uses BPF maps for pid and syscall filtering,
but will in time have features similar to 'perf stat' --interval-print,
--interval-clear, ways to signal from a BPF event that a specific
map (or range of that map) should be printed, optionally as a
histogram, etc.
General:
Jiri Olsa:
- Add cpu and numa topologies classes for further reuse, fixing some
issues in the process.
- Fixup some warnings and debug levels.
- Make rm_rf() remove single file, not just directories.
Documentation:
Jonas Rabenstein:
- Fix HEADER_CMDLINE description in perf.data documentation.
- Fix documentation of the Flags section in perf.data.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXG36iwAKCRCyPKLppCJ+
J3+oAQDRx1tbb3PcenZ1ksgrK3FPyatZ4tM2VRkJpvaCNKk/SwEA9q6xkYNUK1BT
7ogDbIbnQO1Dz9jMsekoQu1+fd2ykAU=
=NcJY
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.1-20190220' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
perf report:
He Kuang:
- Don't shadow inlined symbol with different addr range.
perf script:
Jiri Olsa:
- Allow +- operator to ask for -F to add/remove fields to
the default set, for instance to ask for the removal of the
'cpu' field in tracepoint events, adding 'period' to that
kind of events, etc.
perf test:
Thomas Richter:
- Fix scheduler tracepoint signedness of COMM fields failure of
'evsel-tp-sched' test on s390 and other arches.
Tommi Rantala:
- Skip trace+probe_vfs_getname.sh when 'perf trace' is not built.
perf trace:
Arnaldo Carvalho de Melo:
- Add initial BPF map dumper, initially just for the current, minimal
needs of the augmented_raw_syscalls BPF example used to collect
pointer args payloads that uses BPF maps for pid and syscall filtering,
but will in time have features similar to 'perf stat' --interval-print,
--interval-clear, ways to signal from a BPF event that a specific
map (or range of that map) should be printed, optionally as a
histogram, etc.
General:
Jiri Olsa:
- Add CPU and NUMA topologies classes for further reuse, fixing some
issues in the process.
- Fixup some warnings and debug levels.
- Make rm_rf() remove single file, not just directories.
Documentation:
Jonas Rabenstein:
- Fix HEADER_CMDLINE description in perf.data documentation.
- Fix documentation of the Flags section in perf.data.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Support both Python2 and Python3 in the syscall-counts-by-pid.py script
There may be differences in the ordering of output lines due to
differences in dictionary ordering etc. However the format within lines
should be unchanged.
The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6
Signed-off-by: Tony Jones <tonyj@suse.de>
Link: http://lkml.kernel.org/r/20190222230619.17887-15-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python2 and Python3 in the syscall-counts.py script
There may be differences in the ordering of output lines due to
differences in dictionary ordering etc. However the format within lines
should be unchanged.
The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6
Signed-off-by: Tony Jones <tonyj@suse.de>
Link: http://lkml.kernel.org/r/20190222230619.17887-14-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python2 and Python3 in the stat-cpi.py script
There may be differences in the ordering of output lines due to
differences in dictionary ordering etc. However the format within lines
should be unchanged.
The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190222230619.17887-13-tonyj@suse.de
Signed-off-by: Tony Jones <tonyj@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python2 and Python3 in the stackcollapse.py script
There may be differences in the ordering of output lines due to
differences in dictionary ordering etc. However the format within lines
should be unchanged.
The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6
Signed-off-by: Tony Jones <tonyj@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com> <pbonzini@redhat.com>
Link: http://lkml.kernel.org/r/20190222230619.17887-12-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python2 and Python3 in the sctop.py script
There may be differences in the ordering of output lines due to
differences in dictionary ordering etc. However the format within lines
should be unchanged.
The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6
Signed-off-by: Tony Jones <tonyj@suse.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/r/20190222230619.17887-11-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python2 and Python3 in the powerpc-hcalls.py script
There may be differences in the ordering of output lines due to
differences in dictionary ordering etc. However the format within lines
should be unchanged.
The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6
Signed-off-by: Tony Jones <tonyj@suse.de>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lkml.kernel.org/r/20190222230619.17887-10-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python2 and Python3 in the net_dropmonitor.py script
There may be differences in the ordering of output lines due to
differences in dictionary ordering etc. However the format within lines
should be unchanged.
The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6
Signed-off-by: Tony Jones <tonyj@suse.de>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Link: http://lkml.kernel.org/r/20190222230619.17887-9-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python2 and Python3 in the mem-phys-addr.py script
There may be differences in the ordering of output lines due to
differences in dictionary ordering etc. However the format within lines
should be unchanged.
The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6
Signed-off-by: Tony Jones <tonyj@suse.de>
Link: http://lkml.kernel.org/r/20190222230619.17887-8-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python2 and Python3 in the failed-syscalls-by-pid.py script
There may be differences in the ordering of output lines due to
differences in dictionary ordering etc. However the format within lines
should be unchanged.
The use of 'from __future__' implies the minimum supported Python2 version
is now v2.6
Signed-off-by: Tony Jones <tonyj@suse.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/r/20190222230619.17887-5-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support both Python2 and Python3 in the netdev-times.py script
There may be differences in the ordering of output lines due to
differences in dictionary ordering etc. However the format within lines
should be unchanged.
The use of 'from __future__' implies the minimum supported Python2
version is now v2.6.
Signed-off-by: Tony Jones <tonyj@suse.de>
Cc: Sanagi Koki <sanagi.koki@jp.fujitsu.com>
Link: http://lkml.kernel.org/r/20190222230619.17887-2-tonyj@suse.de
Signed-off-by: Seeteena Thoufeek <s1seetee@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a cell with a volume location server list is added manually by
echoing the details into /proc/net/afs/cells, a record is added but the
flag saying it has been looked up isn't set.
This causes the VL server rotation code to wait forever, with the top of
/proc/pid/stack looking like:
afs_select_vlserver+0x3a6/0x6f3
afs_vl_lookup_vldb+0x4b/0x92
afs_create_volume+0x25/0x1b9
...
with the thread stuck in afs_start_vl_iteration() waiting for
AFS_CELL_FL_NO_LOOKUP_YET to be cleared.
Fix this by clearing AFS_CELL_FL_NO_LOOKUP_YET when setting up a record
if that record's details were supplied manually.
Fixes: 0a5143f2f8 ("afs: Implement VL server rotation")
Reported-by: Dave Botsch <dwb7@cornell.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we made the shmem_reserve_inode call in shmem_link conditional, we
forgot to update the declaration for ret so that it always has a known
value. Dan Carpenter pointed out this deficiency in the original patch.
Fixes: 1062af920c ("tmpfs: fix link accounting when a tmpfile is linked in")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Matej Kupljen <matej.kupljen@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 9da3f2b740.
It was well-intentioned, but wrong. Overriding the exception tables for
instructions for random reasons is just wrong, and that is what the new
code did.
It caused problems for tracing, and it caused problems for strncpy_from_user(),
because the new checks made perfectly valid use cases break, rather than
catch things that did bad things.
Unchecked user space accesses are a problem, but that's not a reason to
add invalid checks that then people have to work around with silly flags
(in this case, that 'kernel_uaccess_faults_ok' flag, which is just an
odd way to say "this commit was wrong" and was sprinked into random
places to hide the wrongness).
The real fix to unchecked user space accesses is to get rid of the
special "let's not check __get_user() and __put_user() at all" logic.
Make __{get|put}_user() be just aliases to the regular {get|put}_user()
functions, and make it impossible to access user space without having
the proper checks in places.
The raison d'être of the special double-underscore versions used to be
that the range check was expensive, and if you did multiple user
accesses, you'd do the range check up front (like the signal frame
handling code, for example). But SMAP (on x86) and PAN (on ARM) have
made that optimization pointless, because the _real_ expense is the "set
CPU flag to allow user space access".
Do let's not break the valid cases to catch invalid cases that shouldn't
even exist.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tobin C. Harding <tobin@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When using -F + syntax to add a field the existing defaults are
currently all marked user_set. This can cause errors when some field is
missing in the perf.data
This patch tracks the actually user set fields separately, so that we don't
error out in this case.
Before:
% perf record true
% perf script -F +metric
Samples for 'cycles:ppp' event do not have CPU attribute set. Cannot print 'cpu' field.
%
After:
5 perf record true
% perf script -F +metric
perf 28936 278636.237688: 1 cycles:ppp: ffffffff8117da99 perf_event_exec+0x59 (/lib/modules/4.20.0-odilo/build/vmlinux)
...
%
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190224153722.27020-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa