Commit Graph

42642 Commits

Author SHA1 Message Date
Linus Torvalds 3ad5d7e06a Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
 "A bunch of fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  slub: mark the dangling ifdef #else of CONFIG_SLUB_DEBUG
  slub: avoid irqoff/on in bulk allocation
  slub: create new ___slab_alloc function that can be called with irqs disabled
  mm: fix up sparse warning in gfpflags_allow_blocking
  ocfs2: fix umask ignored issue
  PM/OPP: add entry in MAINTAINERS
  kernel/panic.c: turn off locks debug before releasing console lock
  kernel/signal.c: unexport sigsuspend()
  kasan: fix kmemleak false-positive in kasan_module_alloc()
  fat: fix fake_offset handling on error path
  mm/hugetlbfs: fix bugs in fallocate hole punch of areas with holes
  mm/page-writeback.c: initialize m_dirty to avoid compile warning
  various: fix pci_set_dma_mask return value checking
  mm: loosen MADV_NOHUGEPAGE to enable Qemu postcopy on s390
  mm: vmalloc: don't remove inexistent guard hole in remove_vm_area()
  tools/vm/page-types.c: support KPF_IDLE
  ncpfs: don't allow negative timeouts
  configfs: allow dynamic group creation
  MAINTAINERS: add Moritz as reviewer for FPGA Manager Framework
  slab.h: sprinkle __assume_aligned attributes
2015-11-21 10:49:13 -08:00
Junxiao Bi 8f1eb48758 ocfs2: fix umask ignored issue
New created file's mode is not masked with umask, and this makes umask not
work for ocfs2 volume.

Fixes: 702e5bc ("ocfs2: use generic posix ACL infrastructure")
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Gang He <ghe@suse.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20 16:17:32 -08:00
OGAWA Hirofumi 928a477102 fat: fix fake_offset handling on error path
For the root directory, .  and ..  are faked (using dir_emit_dots()) and
ctx->pos is reset from 2 to 0.

A corrupted root directory could cause fat_get_entry() to fail, but
->iterate() (fat_readdir()) reports progress to the VFS (with ctx->pos
rewound to 0), so any following calls to ->iterate() continue to return
the same entries again and again.

The result is that userspace will never see the end of the directory,
causing e.g.  'ls' to hang in a getdents() loop.

[hirofumi@mail.parknet.co.jp: cleanup and make sure to correct fake_offset]
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Tested-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Richard Weinberger <richard.weinberger@gmail.com>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20 16:17:32 -08:00
Mike Kravetz 1817889e3b mm/hugetlbfs: fix bugs in fallocate hole punch of areas with holes
Hugh Dickins pointed out problems with the new hugetlbfs fallocate hole
punch code.  These problems are in the routine remove_inode_hugepages and
mostly occur in the case where there are holes in the range of pages to be
removed.  These holes could be the result of a previous hole punch or
simply sparse allocation.  The current code could access pages outside the
specified range.

remove_inode_hugepages handles both hole punch and truncate operations.
Page index handling was fixed/cleaned up so that the loop index always
matches the page being processed.  The code now only makes a single pass
through the range of pages as it was determined page faults could not race
with truncate.  A cond_resched() was added after removing up to
PAGEVEC_SIZE pages.

Some totally unnecessary code in hugetlbfs_fallocate() that remained from
early development was also removed.

Tested with fallocate tests submitted here:
http://librelist.com/browser//libhugetlbfs/2015/6/25/patch-tests-add-tests-for-fallocate-system-call/
And, some ftruncate tests under development

Fixes: b5cec28d36 ("hugetlbfs: truncate_hugepages() takes a range of pages")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Hillf Danton" <hillf.zj@alibaba-inc.com>
Cc: <stable@vger.kernel.org>	[4.3]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20 16:17:32 -08:00
Dan Carpenter 1491e30ed1 ncpfs: don't allow negative timeouts
This code causes a static checker warning because it's a user controlled
variable where we cap the upper bound but not the lower bound.  Let's
return an -EINVAL for negative timeouts.

[akpm@linux-foundation.org: remove unneeded `else']
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jan Kara <jack@suse.com>
Cc: Petr Vandrovec <petr@vandrovec.name>
Cc: David Howells <dhowells@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20 16:17:32 -08:00
Daniel Baluta 5cf6a51e60 configfs: allow dynamic group creation
This patchset introduces IIO software triggers, offers a way of configuring
them via configfs and adds the IIO hrtimer based interrupt source to be used
with software triggers.

The architecture is now split in 3 parts, to remove all IIO trigger specific
parts from IIO configfs core:

(1) IIO configfs - creates the root of the IIO configfs subsys.
(2) IIO software triggers - software trigger implementation, dynamically
    creating /config/iio/triggers group.
(3) IIO hrtimer trigger - is the first interrupt source for software triggers
    (with syfs to follow). Each trigger type can implement its own set of
    attributes.

Lockdep seems to be happy with the locking in configfs patch.

This patch (of 5):

We don't want to hardcode default groups at subsystem
creation time. We export:
	* configfs_register_group
	* configfs_unregister_group
to allow drivers to programatically create/destroy groups
later, after module init time.

This is needed for IIO configfs support.

(akpm: the other 4 patches to be merged via the IIO tree)

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Suggested-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Octavian Purdila <octavian.purdila@intel.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Adriana Reus <adriana.reus@intel.com>
Cc: Cristina Opriceana <cristina.opriceana@gmail.com>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20 16:17:32 -08:00
Linus Torvalds 95803066c6 Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:

 - A collection of crash and deadlock fixes for DAX that are also tagged
   for -stable.  We will look to re-enable DAX pmd mappings in 4.5, but
   for now 4.4 and -stable should disable it by default.

 - A fixup to ext2 and ext4 to mirror the same warning emitted by XFS
   when mounting with "-o dax"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  block: protect rw_page against device teardown
  mm, dax: fix DAX deadlocks (COW fault)
  dax: disable pmd mappings
  ext2, ext4: warn when mounting with dax enabled
2015-11-20 15:00:50 -08:00
Dan Williams 2e6edc9538 block: protect rw_page against device teardown
Fix use after free crashes like the following:

 general protection fault: 0000 [#1] SMP
 Call Trace:
  [<ffffffffa0050216>] ? pmem_do_bvec.isra.12+0xa6/0xf0 [nd_pmem]
  [<ffffffffa0050ba2>] pmem_rw_page+0x42/0x80 [nd_pmem]
  [<ffffffff8128fd90>] bdev_read_page+0x50/0x60
  [<ffffffff812972f0>] do_mpage_readpage+0x510/0x770
  [<ffffffff8128fd20>] ? I_BDEV+0x20/0x20
  [<ffffffff811d86dc>] ? lru_cache_add+0x1c/0x50
  [<ffffffff81297657>] mpage_readpages+0x107/0x170
  [<ffffffff8128fd20>] ? I_BDEV+0x20/0x20
  [<ffffffff8128fd20>] ? I_BDEV+0x20/0x20
  [<ffffffff8129058d>] blkdev_readpages+0x1d/0x20
  [<ffffffff811d615f>] __do_page_cache_readahead+0x28f/0x310
  [<ffffffff811d6039>] ? __do_page_cache_readahead+0x169/0x310
  [<ffffffff811c5abd>] ? pagecache_get_page+0x2d/0x1d0
  [<ffffffff811c76f6>] filemap_fault+0x396/0x530
  [<ffffffff811f816e>] __do_fault+0x4e/0xf0
  [<ffffffff811fce7d>] handle_mm_fault+0x11bd/0x1b50

Cc: <stable@vger.kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Matthew Wilcox <willy@linux.intel.com>
[willy: symmetry fixups]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-19 13:47:10 -08:00
Dan Williams ee82c9ed41 dax: disable pmd mappings
While dax pmd mappings are functional in the nominal path they trigger
kernel crashes in the following paths:

 BUG: unable to handle kernel paging request at ffffea0004098000
 IP: [<ffffffff812362f7>] follow_trans_huge_pmd+0x117/0x3b0
 [..]
 Call Trace:
  [<ffffffff811f6573>] follow_page_mask+0x2d3/0x380
  [<ffffffff811f6708>] __get_user_pages+0xe8/0x6f0
  [<ffffffff811f7045>] get_user_pages_unlocked+0x165/0x1e0
  [<ffffffff8106f5b1>] get_user_pages_fast+0xa1/0x1b0

 kernel BUG at arch/x86/mm/gup.c:131!
 [..]
 Call Trace:
  [<ffffffff8106f34c>] gup_pud_range+0x1bc/0x220
  [<ffffffff8106f634>] get_user_pages_fast+0x124/0x1b0

 BUG: unable to handle kernel paging request at ffffea0004088000
 IP: [<ffffffff81235f49>] copy_huge_pmd+0x159/0x350
 [..]
 Call Trace:
  [<ffffffff811fad3c>] copy_page_range+0x34c/0x9f0
  [<ffffffff810a0daf>] copy_process+0x1b7f/0x1e10
  [<ffffffff810a11c1>] _do_fork+0x91/0x590

All of these paths are interpreting a dax pmd mapping as a transparent
huge page and making the assumption that the pfn is covered by the
memmap, i.e. that the pfn has an associated struct page.  PTE mappings
do not suffer the same fate since they have the _PAGE_SPECIAL flag to
cause the gup path to fault.  We can do something similar for the PMD
path, or otherwise defer pmd support for cases where a struct page is
available.  For now, 4.4-rc and -stable need to disable dax pmd support
by default.

For development the "depends on BROKEN" line can be removed from
CONFIG_FS_DAX_PMD.

Cc: <stable@vger.kernel.org>
Cc: Jan Kara <jack@suse.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-16 23:54:45 -08:00
Geert Uytterhoeven cf89752645 FS-Cache: Add missing initialization of ret in cachefiles_write_page()
fs/cachefiles/rdwr.c: In function ‘cachefiles_write_page’:
fs/cachefiles/rdwr.c:882: warning: ‘ret’ may be used uninitialized in
this function

If the jump to label "error" is taken, "ret" will indeed be
uninitialized, and random stack data may be printed by the debug code.

Fixes: 102f4d900c ("FS-Cache: Handle a write to the page immediately beyond the EOF marker")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-16 20:38:43 -05:00
Dan Williams ef83b6e8f4 ext2, ext4: warn when mounting with dax enabled
Similar to XFS warn when mounting DAX while it is still considered under
development.  Also, aspects of the DAX implementation, for example
synchronization against multiple faults and faults causing block
allocation, depend on the correct implementation in the filesystem.  The
maturity of a given DAX implementation is filesystem specific.

Cc: <stable@vger.kernel.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: linux-ext4@vger.kernel.org
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dave Chinner <david@fromorbit.com>
Acked-by: Jan Kara <jack@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-16 09:43:54 -08:00
Linus Torvalds 63f4f7e8df platform/chrome: Branch for v4.4
Here's the branch of chrome platform changes for v4.4. Some have been queued
 up for the full 4.3 release cycle since I forgot to send them in for that
 round (rebased early on to deal with fixes conflicts).
 
 Most of these enable EC communication stuff -- Pixel 2015 support, enabling
 building for ARM64 platforms, and a few fixes for memory leaks.
 
 There's also a patch in here to allow reading/writing the verified boot
 context, which depends on a sysfs patch acked by Greg.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWQWj/AAoJEIwa5zzehBx3figQAJuZK+2PDMeOe3hg38WEHpAA
 NVaSkZss2VLN8SQCJ8BqB/xoM2lm3GSef2R705m7s20/FsPP7rcJZoeeNkWUK+rn
 Dc01uJpVwGVtBIjst0FkxS+3xBeUrX6QLQyAnxQV4SIOg4t1EtZvgxK/4wnE726H
 BV0bTsUHKo0+FSrtI/QoHFkSFbUBansQ7JuN00YOfuwJPdhKgpInbJPqVkmRAYqI
 ylFFiTUR946SNDMUvmDnd37I2FrIzxslNTBu/oKl0DKI7DPmN3ITvX2JqnnuxktA
 ru7TWbny+oa2TQAwynYxBq9hpMFHMVVbtDPXE/7MisfL4+KUaSE0e95b4ONfG7yZ
 oxzf6S1RxzhA0Eo/bFZ0i29DZ4ogR8ql65RNolWJg13XACrPVyGrTWW5ZFe6xbI9
 HS13oBOHXIllSDfq9QjMRtNHAv268/oTiF8LXLPrxSCYllGZnKL7g9Ae9dFqOdXx
 mnoqYtVPsaErek4ktqOZIMRY5mXpX2JyR642PjGbK71IjRKmGvvRqpee+iCpF7ew
 OR80tAq56/R3NQqp5pgReshglOwQsLdu99spSc+6anjdeSb85ujM2jwXGjLNHwDi
 9XpyIAXox5dy3CX8LqgqryIKp/vqRd4q1vugKXLL1dBMSAm/QltjqPWxB2fCRCve
 IqNEhz4EI6uhJVeqDSNo
 =dv1O
 -----END PGP SIGNATURE-----

Merge tag 'chrome-platform-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform

Pull chrome platform updates from Olof Johansson:
 "Here's the branch of chrome platform changes for v4.4.  Some have been
  queued up for the full 4.3 release cycle since I forgot to send them
  in for that round (rebased early on to deal with fixes conflicts).

  Most of these enable EC communication stuff -- Pixel 2015 support,
  enabling building for ARM64 platforms, and a few fixes for memory
  leaks.

  There's also a patch in here to allow reading/writing the verified
  boot context, which depends on a sysfs patch acked by Greg"

* tag 'chrome-platform-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform:
  platform/chrome: Fix i2c-designware adapter name
  platform/chrome: Support reading/writing the vboot context
  sysfs: Support is_visible() on binary attributes
  platform/chrome: cros_ec: Fix possible leak in led_rgb_store()
  platform/chrome: cros_ec: Fix leak in sequence_store()
  platform/chrome: Enable Chrome platforms on 64-bit ARM
  platform/chrome: cros_ec_dev - Add a platform device ID table
  platform/chrome: cros_ec_lpc - Add support for Google Pixel 2
  platform/chrome: cros_ec_lpc - Use existing function to check EC result
  platform/chrome: Make depends on MFD_CROS_EC instead CROS_EC_PROTO
  Revert "platform/chrome: Don't make CHROME_PLATFORMS depends on X86 || ARM"
2015-11-13 21:53:18 -08:00
Linus Torvalds 9aa3d651a9 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
 "This series contains HCH's changes to absorb configfs attribute
  ->show() + ->store() function pointer usage from it's original
  tree-wide consumers, into common configfs code.

  It includes usb-gadget, target w/ drivers, netconsole and ocfs2
  changes to realize the improved simplicity, that now renders the
  original include/target/configfs_macros.h CPP magic for fabric drivers
  and others, unnecessary and obsolete.

  And with common code in place, new configfs attributes can be added
  easier than ever before.

  Note, there are further improvements in-flight from other folks for
  v4.5 code in configfs land, plus number of target fixes for post -rc1
  code"

In the meantime, a new user of the now-removed old configfs API came in
through the char/misc tree in commit 7bd1d4093c ("stm class: Introduce
an abstraction for System Trace Module devices").

This merge resolution comes from Alexander Shishkin, who updated his stm
class tracing abstraction to account for the removal of the old
show_attribute and store_attribute methods in commit 517982229f
("configfs: remove old API") from this pull.  As Alexander says about
that patch:

 "There's no need to keep an extra wrapper structure per item and the
  awkward show_attribute/store_attribute item ops are no longer needed.

  This patch converts policy code to the new api, all the while making
  the code quite a bit smaller and easier on the eyes.

  Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>"

That patch was folded into the merge so that the tree should be fully
bisectable.

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (23 commits)
  configfs: remove old API
  ocfs2/cluster: use per-attribute show and store methods
  ocfs2/cluster: move locking into attribute store methods
  netconsole: use per-attribute show and store methods
  target: use per-attribute show and store methods
  spear13xx_pcie_gadget: use per-attribute show and store methods
  dlm: use per-attribute show and store methods
  usb-gadget/f_serial: use per-attribute show and store methods
  usb-gadget/f_phonet: use per-attribute show and store methods
  usb-gadget/f_obex: use per-attribute show and store methods
  usb-gadget/f_uac2: use per-attribute show and store methods
  usb-gadget/f_uac1: use per-attribute show and store methods
  usb-gadget/f_mass_storage: use per-attribute show and store methods
  usb-gadget/f_sourcesink: use per-attribute show and store methods
  usb-gadget/f_printer: use per-attribute show and store methods
  usb-gadget/f_midi: use per-attribute show and store methods
  usb-gadget/f_loopback: use per-attribute show and store methods
  usb-gadget/ether: use per-attribute show and store methods
  usb-gadget/f_acm: use per-attribute show and store methods
  usb-gadget/f_hid: use per-attribute show and store methods
  ...
2015-11-13 20:04:17 -08:00
Linus Torvalds 5d2eb548b3 Merge branch 'for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs xattr cleanups from Al Viro.

* 'for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  f2fs: xattr simplifications
  squashfs: xattr simplifications
  9p: xattr simplifications
  xattr handlers: Pass handler to operations instead of flags
  jffs2: Add missing capability check for listing trusted xattrs
  hfsplus: Remove unused xattr handler list operations
  ubifs: Remove unused security xattr handler
  vfs: Fix the posix_acl_xattr_list return value
  vfs: Check attribute names in posix acl xattr handers
2015-11-13 18:02:30 -08:00
Linus Torvalds 2870f6c4d1 Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:

 - three fixes tagged for -stable including a crash fix, simple
   performance tweak, and an invalid i/o error.

 - build regression fix for the nvdimm unit tests

 - nvdimm documentation update

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: fix __dax_pmd_fault crash
  libnvdimm: documentation clarifications
  libnvdimm, pmem: fix size trim in pmem_direct_access()
  libnvdimm, e820: fix numa node for e820-type-12 pmem ranges
  tools/testing/nvdimm, acpica: fix flag rename build breakage
2015-11-13 17:35:48 -08:00
Andreas Gruenbacher 29608d208b f2fs: xattr simplifications
Now that the xattr handler is passed to the xattr handler operations, we
have access to the attribute name prefix, so simplify
f2fs_xattr_generic_list.

Also, f2fs_xattr_advise_list is only ever called for
f2fs_xattr_advise_handler; there is no need to double check for that.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Changman Lee <cm224.lee@samsung.com>
Cc: Chao Yu <chao2.yu@samsung.com>
Cc: linux-f2fs-devel@lists.sourceforge.net
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-13 20:34:34 -05:00
Andreas Gruenbacher 0ddaf72c1d squashfs: xattr simplifications
Now that the xattr handler is passed to the xattr handler operations, we
have access to the attribute name prefix, so simplify the squashfs xattr
handlers a bit.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-13 20:34:33 -05:00
Andreas Gruenbacher e409de992e 9p: xattr simplifications
Now that the xattr handler is passed to the xattr handler operations, we
can use the same get and set operations for the user, trusted, and security
xattr namespaces.  In those namespaces, we can access the full attribute
name by "reattaching" the name prefix the vfs has skipped for us.  Add a
xattr_full_name helper to make this obvious in the code.

For the "system.posix_acl_access" and "system.posix_acl_default"
attributes, handler->prefix is the full attribute name; the suffix is the
empty string.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: v9fs-developer@lists.sourceforge.net
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-13 20:34:33 -05:00
Andreas Gruenbacher d9a82a0403 xattr handlers: Pass handler to operations instead of flags
The xattr_handler operations are currently all passed a file system
specific flags value which the operations can use to disambiguate between
different handlers; some file systems use that to distinguish the xattr
namespace, for example.  In some oprations, it would be useful to also have
access to the handler prefix.  To allow that, pass a pointer to the handler
to operations instead of the flags value alone.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-13 20:34:32 -05:00
Andreas Gruenbacher bf781714b3 jffs2: Add missing capability check for listing trusted xattrs
The vfs checks if a task has the appropriate access for get and set
operations, but it cannot do that for the list operation; the file system
must check for that itself.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-13 20:34:30 -05:00
Andreas Gruenbacher e282fb7f3b hfsplus: Remove unused xattr handler list operations
The list operations can never be called; they are even documented to be
unused.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-13 20:34:29 -05:00
Andreas Gruenbacher 13d3408f10 ubifs: Remove unused security xattr handler
Ubifs installs a security xattr handler in sb->s_xattr but doesn't use the
generic_{get,set,list,remove}xattr inode operations needed for processing
this list of attribute handlers; the handler is never called.  Instead,
ubifs uses its own xattr handlers which also process security xattrs.

Remove the dead code.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: linux-mtd@lists.infradead.org
Cc: Subodh Nijsure <snijsure@grid-net.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-13 20:34:29 -05:00
Andreas Gruenbacher dae5f57a72 vfs: Fix the posix_acl_xattr_list return value
When a filesystem that contains POSIX ACLs is mounted without ACL support
(-o noacl), the appropriate behavior is not to list any existing POSIX ACL
xattrs.  The return value for list xattr handlers in this case is 0, not an
error code: several filesystems that use the POSIX ACL xattr handlers do
not expect the list operation to fail.

Symlinks cannot have ACLs, so posix_acl_xattr_list will never be called for
symlinks in the first place.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-13 20:34:28 -05:00
Andreas Gruenbacher c361016ade vfs: Check attribute names in posix acl xattr handers
The get and set operations of the POSIX ACL xattr handlers failed to check
the attribute names, so all names with "system.posix_acl_access" or
"system.posix_acl_default" as a prefix were accepted.  Reject invalid names
from now on.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-13 20:34:28 -05:00
Linus Torvalds f3996e6ac6 Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Pull SMB3 updates from Steve French:
 "A collection of SMB3 patches adding some reliability features
  (persistent and resilient handles) and improving SMB3 copy offload.

  I will have some additional patches for SMB3 encryption and SMB3.1.1
  signing (important security features), and also for improving SMB3
  persistent handle reconnection (setting ChannelSequence number e.g.)
  that I am still working on but wanted to get this set in since they
  can stand alone"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  Allow copy offload (CopyChunk) across shares
  Add resilienthandles mount parm
  [SMB3] Send durable handle v2 contexts when use of persistent handles required
  [SMB3] Display persistenthandles in /proc/mounts for SMB3 shares if enabled
  [SMB3] Enable checking for continuous availability and persistent handle support
  [SMB3] Add parsing for new mount option controlling persistent handles
  Allow duplicate extents in SMB3 not just SMB3.1.1
2015-11-13 16:40:36 -08:00
Linus Torvalds e75cdf9898 Merge branch 'for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes and cleanups from Chris Mason:
 "Some of this got cherry-picked from a github repo this week, but I
  verified the patches.

  We have three small scrub cleanups and a collection of fixes"

* 'for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  btrfs: Use fs_info directly in btrfs_delete_unused_bgs
  btrfs: Fix lost-data-profile caused by balance bg
  btrfs: Fix lost-data-profile caused by auto removing bg
  btrfs: Remove len argument from scrub_find_csum
  btrfs: Reduce unnecessary arguments in scrub_recheck_block
  btrfs: Use scrub_checksum_data and scrub_checksum_tree_block for scrub_recheck_block_checksum
  btrfs: Reset sblock->xxx_error stats before calling scrub_recheck_block_checksum
  btrfs: scrub: setup all fields for sblock_to_check
  btrfs: scrub: set error stats when tree block spanning stripes
  Btrfs: fix race when listing an inode's xattrs
  Btrfs: fix race leading to BUG_ON when running delalloc for nodatacow
  Btrfs: fix race leading to incorrect item deletion when dropping extents
  Btrfs: fix sleeping inside atomic context in qgroup rescan worker
  Btrfs: fix race waiting for qgroup rescan worker
  btrfs: qgroup: exit the rescan worker during umount
  Btrfs: fix extent accounting for partial direct IO writes
2015-11-13 16:30:29 -08:00
Linus Torvalds ca4ba96e02 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull Ceph updates from Sage Weil:
 "There are several patches from Ilya fixing RBD allocation lifecycle
  issues, a series adding a nocephx_sign_messages option (and associated
  bug fixes/cleanups), several patches from Zheng improving the
  (directory) fsync behavior, a big improvement in IO for direct-io
  requests when striping is enabled from Caifeng, and several other
  small fixes and cleanups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  libceph: clear msg->con in ceph_msg_release() only
  libceph: add nocephx_sign_messages option
  libceph: stop duplicating client fields in messenger
  libceph: drop authorizer check from cephx msg signing routines
  libceph: msg signing callouts don't need con argument
  libceph: evaluate osd_req_op_data() arguments only once
  ceph: make fsync() wait unsafe requests that created/modified inode
  ceph: add request to i_unsafe_dirops when getting unsafe reply
  libceph: introduce ceph_x_authorizer_cleanup()
  ceph: don't invalidate page cache when inode is no longer used
  rbd: remove duplicate calls to rbd_dev_mapping_clear()
  rbd: set device_type::release instead of device::release
  rbd: don't free rbd_dev outside of the release callback
  rbd: return -ENOMEM instead of pool id if rbd_dev_create() fails
  libceph: use local variable cursor instead of &msg->cursor
  libceph: remove con argument in handle_reply()
  ceph: combine as many iovec as possile into one OSD request
  ceph: fix message length computation
  ceph: fix a comment typo
  rbd: drop null test before destroy functions
2015-11-13 09:24:40 -08:00
Dan Williams 152d7bd80d dax: fix __dax_pmd_fault crash
Since 4.3 introduced devm_memremap_pages() the pfns handled by DAX may
optionally have a struct page backing.  When a mapped pfn reaches
vmf_insert_pfn_pmd() it fails with a crash signature like the following:

 kernel BUG at mm/huge_memory.c:905!
 [..]
 Call Trace:
  [<ffffffff812a73ba>] __dax_pmd_fault+0x2ea/0x5b0
  [<ffffffffa01a4182>] xfs_filemap_pmd_fault+0x92/0x150 [xfs]
  [<ffffffff811fbe02>] handle_mm_fault+0x312/0x1b50

Fix this by falling back to 4K mappings in the pfn_valid() case.  Longer
term, vmf_insert_pfn_pmd() needs to grow support for architectures that
can provide a 'pmd_special' capability.

Cc: <stable@vger.kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-12 18:33:54 -08:00
Linus Torvalds 5e2078b289 Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull misc block fixes from Jens Axboe:
 "Stuff that got collected after the merge window opened.  This
  contains:

   - NVMe:
        - Fix for non-striped transfer size setting for NVMe from
          Sathyavathi.
        - (Some) support for the weird Apple nvme controller in the
          macbooks. From Stephan Günther.

   - The error value leak for dax from Al.

   - A few minor blk-mq tweaks from me.

   - Add the new linux-block@vger.kernel.org mailing list to the
     MAINTAINERS file.

   - Discard fix for brd, from Jan.

   - A kerneldoc warning for block core from Randy.

   - An older fix from Vivek, converting a WARN_ON() to a rate limited
     printk when a device is hot removed with dirty inodes"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: don't hardcode blk_qc_t -> tag mask
  dax_io(): don't let non-error value escape via retval instead of EFAULT
  block: fix blk-core.c kernel-doc warning
  fs/block_dev.c: Remove WARN_ON() when inode writeback fails
  NVMe: add support for Apple NVMe controller
  NVMe: use split lo_hi_{read,write}q
  blk-mq: mark __blk_mq_complete_request() static
  MAINTAINERS: add reference to new linux-block list
  NVMe: Increase the max transfer size when mdts is 0
  brd: Refuse improperly aligned discard requests
2015-11-12 15:54:30 -08:00
Linus Torvalds 5d50ac70fe xfs: updates for 4.4-rc1
This update contains:
 o per-mount operational statistics in sysfs
 o fixes for concurrent aio append write submission
 o various logging fixes
 o detection of zeroed logs and invalid log sequence numbers on v5 filesystems
 o memory allocation failure message improvements
 o a bunch of xattr/ACL fixes
 o fdatasync optimisation
 o miscellaneous other fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJWQ7GzAAoJEK3oKUf0dfodJakP/3s3N5ngqRWa+PQwBQPdTO0r
 MBQppSKXWdT7YLhiFt1ZRlvXiMQOIZPNx0yBS9mzQghL9sTGvcPdxjbQnNh6LUnE
 fGC2Yzi/J8lM2M80ezk3JoFqdqAQ/U78ARA/VpZct4imrps/h+s2Klkx87xPJsiK
 /wY56FXFtoUS1ADYhL8qCeiAGOFpyIttiDNOVW3O2ZXn4iJUsa2nLCoiFwF/yFvU
 S85iUJWAsvVSW5WgfUufmodC4u+WOT+9isNRxEmBjpxYYAFrFb5+8DYY3Coh6z0V
 HqYPhpzBOG9gXbAue5v+ccsp2w60atXIFUQkR2HFBblvxsDMkvsgycJWJgDNmJiw
 RYDMBJ26epxUdTScUxijKiGfnnbZW5b+uzp6FvVsE4KPdP62ol7YNqxj8/FFIjQN
 JBl2ooiczOgvhCdvdWmWNEGWHccBcJ8UJ2RzJ0owVIIJZZYwjkZNzeSieWzYc7tr
 b9wBC4wnaYAK/V7aEGLJxMXVjkanrqAnaXf5ymICSFv8me/qAfZ2sLcY2P6SHuhO
 Fmkj6R5Thh1SYxk3thgGFZg7LGuxJW9cmypvFGpKhIvEaNGIM6ScdIwO7kCHYWv7
 3EkP42mmJLIYxKz/q2nHqt7R246YFraIRowLWptJUl32uyzO7SrdKbc8+o5WD4Wl
 2byjE9TjXOa1jGuPa3kN
 =zu+5
 -----END PGP SIGNATURE-----

Merge tag 'xfs-for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs

Pull xfs updates from Dave Chinner:
 "There is nothing really major here - the only significant addition is
  the per-mount operation statistics infrastructure.  Otherwises there's
  various ACL, xattr, DAX, AIO and logging fixes, and a smattering of
  small cleanups and fixes elsewhere.

  Summary:

   - per-mount operational statistics in sysfs
   - fixes for concurrent aio append write submission
   - various logging fixes
   - detection of zeroed logs and invalid log sequence numbers on v5 filesystems
   - memory allocation failure message improvements
   - a bunch of xattr/ACL fixes
   - fdatasync optimisation
   - miscellaneous other fixes and cleanups"

* tag 'xfs-for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (39 commits)
  xfs: give all workqueues rescuer threads
  xfs: fix log recovery op header validation assert
  xfs: Fix error path in xfs_get_acl
  xfs: optimise away log forces on timestamp updates for fdatasync
  xfs: don't leak uuid table on rmmod
  xfs: invalidate cached acl if set via ioctl
  xfs: Plug memory leak in xfs_attrmulti_attr_set
  xfs: Validate the length of on-disk ACLs
  xfs: invalidate cached acl if set directly via xattr
  xfs: xfs_filemap_pmd_fault treats read faults as write faults
  xfs: add ->pfn_mkwrite support for DAX
  xfs: DAX does not use IO completion callbacks
  xfs: Don't use unwritten extents for DAX
  xfs: introduce BMAPI_ZERO for allocating zeroed extents
  xfs: fix inode size update overflow in xfs_map_direct()
  xfs: clear PF_NOFREEZE for xfsaild kthread
  xfs: fix an error code in xfs_fs_fill_super()
  xfs: stats are no longer dependent on CONFIG_PROC_FS
  xfs: simplify /proc teardown & error handling
  xfs: per-filesystem stats counter implementation
  ...
2015-11-11 20:18:48 -08:00
Linus Torvalds 31c1febd7a Mainly smaller bugfixes and cleanup. We're still finding some bugs from
the breakup of the big NFSv4 state lock in 3.17--thanks especially to
 Andrew Elble and Jeff Layton for tracking down some of the remaining
 races.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWQ51oAAoJECebzXlCjuG+b1AP+wWamMNw8eS0N98+KslfTMNd
 BFcOFp6L5Hv1VRuwl67V9UUNS+9y5rsgWh9gMnQe5yPZ+dVABbO6mKfh3f7HJ2zg
 aGzmE9ZdTMejjRDpSHHMEqxYePlxGVgxVhr8CgnzgkXf6KBEy3emfDlFIocgFWdR
 JGWEhfOoOa+H7b3Awq3KxlxhAajq1ic14un2CLxTYdvjshwhlIjnscY1F7vNiNRg
 O/ELQRKCCSNZbwGSV/OhNUXx3VQPQUh1eMvIfSD3Fs6AtMybIWGW5Fc36jxZJKt2
 kllcEfukRnGa+Ezl/hwBWd1pEVMwmkYhNRt+9LtH8uWG4+uT5i3Mxn4taDYg8618
 plp2GtRoC3VwOvUKEcKl3HhlRBu5H4zJtx9x60NDzAgNUtoKG/Dl7rhm7o7QwUk8
 W3k0jYAryoyx+12fYO0dssdM4pj1Gi7nRGR687lKzXXttktbQF88ZS9EHhI3oFiC
 Ak8ilEeap8ND1KIJY6Z2xr925BPpw+P2GXbd/Mr5H0aX3a3WM3wLPXlToZbve5EP
 haYnTqbHw9QzqbLDcki8s0hNgv+xwlQWopoInGijfr3IAHQMpKStI0WxhyTYsb8g
 0xyRWA1COnj5WvgznbkMky7Q45T27q26EFgaS8+LEJ1rtEpmNDZOaycbwym6XQHk
 1oyydIRSWM3c7eWnDvFG
 =wRg0
 -----END PGP SIGNATURE-----

Merge tag 'nfsd-4.4' of git://linux-nfs.org/~bfields/linux

Pull nfsd updates from Bruce Fields:
 "Apologies for coming a little late in the merge window.  Fortunately
  this is another fairly quiet one:

  Mainly smaller bugfixes and cleanup.  We're still finding some bugs
  from the breakup of the big NFSv4 state lock in 3.17 -- thanks
  especially to Andrew Elble and Jeff Layton for tracking down some of
  the remaining races"

* tag 'nfsd-4.4' of git://linux-nfs.org/~bfields/linux:
  svcrpc: document lack of some memory barriers
  nfsd: fix race with open / open upgrade stateids
  nfsd: eliminate sending duplicate and repeated delegations
  nfsd: remove recurring workqueue job to clean DRC
  SUNRPC: drop stale comment in svc_setup_socket()
  nfsd: ensure that seqid morphing operations are atomic wrt to copies
  nfsd: serialize layout stateid morphing operations
  nfsd: improve client_has_state to check for unused openowners
  nfsd: fix clid_inuse on mount with security change
  sunrpc/cache: make cache flushing more reliable.
  nfsd: move include of state.h from trace.c to trace.h
  sunrpc: avoid warning in gss_key_timeout
  lockd: get rid of reference-counted NSM RPC clients
  SUNRPC: Use MSG_SENDPAGE_NOTLAST when calling sendpage()
  lockd: create NSM handles per net namespace
  nfsd: switch unsigned char flags in svc_fh to bools
  nfsd: move svc_fh->fh_maxsize to just after fh_handle
  nfsd: drop null test before destroy functions
  nfsd: serialize state seqid morphing operations
2015-11-11 20:11:28 -08:00
Linus Torvalds 842cf0b952 Merge branch 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs update from Al Viro:

 - misc stable fixes

 - trivial kernel-doc and comment fixups

 - remove never-used block_page_mkwrite() wrapper function, and rename
   the function that is _actually_ used to not have double underscores.

* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: 9p: cache.h: Add #define of include guard
  vfs: remove stale comment in inode_operations
  vfs: remove unused wrapper block_page_mkwrite()
  binfmt_elf: Correct `arch_check_elf's description
  fs: fix writeback.c kernel-doc warnings
  fs: fix inode.c kernel-doc warning
  fs/pipe.c: return error code rather than 0 in pipe_write()
  fs/pipe.c: preserve alloc_file() error code
  binfmt_elf: Don't clobber passed executable's file header
  FS-Cache: Handle a write to the page immediately beyond the EOF marker
  cachefiles: perform test on s_blocksize when opening cache file.
  FS-Cache: Don't override netfs's primary_index if registering failed
  FS-Cache: Increase reference of parent after registering, netfs success
  debugfs: fix refcount imbalance in start_creating
2015-11-11 09:45:24 -08:00
Al Viro cadfbb6ec2 dax_io(): don't let non-error value escape via retval instead of EFAULT
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Cc: stable@vger.kernel.org # 4.0+
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-11 09:36:57 -07:00
Vivek Goyal dbd3ca5075 fs/block_dev.c: Remove WARN_ON() when inode writeback fails
If a block device is hot removed and later last reference to device
is put, we try to writeback the dirty inode. But device is gone and
that writeback fails.

Currently we do a WARN_ON() which does not seem to be the right thing.
Convert it to a ratelimited kernel warning.

Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
[jmoyer@redhat.com: get rid of unnecessary name initialization, 80 cols]
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-11 09:36:57 -07:00
Tzvetelin Katchov 7c7afc440c fs: 9p: cache.h: Add #define of include guard
The include file was intended to have an include guard, but the #define
part is missing.

Signed-off-by: Tzvetelin Katchov <katchov@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-11 02:19:50 -05:00
Ross Zwisler 5c50002963 vfs: remove unused wrapper block_page_mkwrite()
The function currently called "__block_page_mkwrite()" used to be called
"block_page_mkwrite()" until a wrapper for this function was added by:

commit 24da4fab5a ("vfs: Create __block_page_mkwrite() helper passing
	error values back")

This wrapper, the current "block_page_mkwrite()", is currently unused.
__block_page_mkwrite() is used directly by ext4, nilfs2 and xfs.

Remove the unused wrapper, rename __block_page_mkwrite() back to
block_page_mkwrite() and update the comment above block_page_mkwrite().

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.com>
Cc: Jan Kara <jack@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-11 02:19:33 -05:00
Maciej W. Rozycki 54d15714f7 binfmt_elf: Correct `arch_check_elf's description
Correct `arch_check_elf's description, mistakenly copied and pasted from
`arch_elf_pt_proc'.

Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-11 02:19:21 -05:00
Randy Dunlap 88a578d823 fs: fix writeback.c kernel-doc warnings
Fix kernel-doc warnings in fs/fs-writeback.c by moving a #define macro
to after the function's opening brace. Also #undef this macro at the
end of the function.

..//fs/fs-writeback.c:1984: warning: Excess function parameter 'inode' description in 'I_DIRTY_INODE'
..//fs/fs-writeback.c:1984: warning: Excess function parameter 'flags' description in 'I_DIRTY_INODE'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-11 02:18:27 -05:00
Randy Dunlap 034ae4bac9 fs: fix inode.c kernel-doc warning
Fix kernel-doc warning in fs/inode.c:

..//fs/inode.c:1606: warning: No description found for parameter 'inode'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-11 02:18:27 -05:00
Eric Biggers 6ae0806993 fs/pipe.c: return error code rather than 0 in pipe_write()
pipe_write() would return 0 if it failed to merge the beginning of the
data to write with the last, partially filled pipe buffer.  It should
return an error code instead.  Userspace programs could be confused by
write() returning 0 when called with a nonzero 'count'.

The EFAULT error case was a regression from f0d1bec9d5 ("new helper:
copy_page_from_iter()"), while the ops->confirm() error case was a much
older bug.

Test program:

	#include <assert.h>
	#include <errno.h>
	#include <unistd.h>

	int main(void)
	{
		int fd[2];
		char data[1] = {0};

		assert(0 == pipe(fd));
		assert(1 == write(fd[1], data, 1));

		/* prior to this patch, write() returned 0 here  */
		assert(-1 == write(fd[1], NULL, 1));
		assert(errno == EFAULT);
	}

Cc: stable@vger.kernel.org # at least v3.15+
Signed-off-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-11 02:18:26 -05:00
Eric Biggers e9bb1f9b12 fs/pipe.c: preserve alloc_file() error code
If sys_pipe() was unable to allocate a 'struct file', it always failed
with ENFILE, which means "The number of simultaneously open files in the
system would exceed a system-imposed limit." However, alloc_file()
actually returns an ERR_PTR value and might fail with other error codes.
Currently, in addition to ENFILE, it can fail with ENOMEM, potentially
when there are few open files in the system.  Update sys_pipe() to
preserve this error code.

In a prior submission of a similar patch (1) some concern was raised
about introducing a new error code for sys_pipe().  However, for most
system calls, programs cannot assume that new error codes will never be
introduced.  In addition, ENOMEM was, in fact, already a possible error
code for sys_pipe(), in the case where the file descriptor table could
not be expanded due to insufficient memory.

	(1) http://comments.gmane.org/gmane.linux.kernel/1357942

Signed-off-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-11 02:18:23 -05:00
Maciej W. Rozycki b582ef5c53 binfmt_elf: Don't clobber passed executable's file header
Do not clobber the buffer space passed from `search_binary_handler' and
originally preloaded by `prepare_binprm' with the executable's file
header by overwriting it with its interpreter's file header.  Instead
keep the buffer space intact and directly use the data structure locally
allocated for the interpreter's file header, fixing a bug introduced in
2.1.14 with loadable module support (linux-mips.org commit beb11695
[Import of Linux/MIPS 2.1.14], predating kernel.org repo's history).
Adjust the amount of data read from the interpreter's file accordingly.

This was not an issue before loadable module support, because back then
`load_elf_binary' was executed only once for a given ELF executable,
whether the function succeeded or failed.

With loadable module support supported and enabled, upon a failure of
`load_elf_binary' -- which may for example be caused by architecture
code rejecting an executable due to a missing hardware feature requested
in the file header -- a module load is attempted and then the function
reexecuted by `search_binary_handler'.  With the executable's file
header replaced with its interpreter's file header the executable can
then be erroneously accepted in this subsequent attempt.

Cc: stable@vger.kernel.org # all the way back
Signed-off-by: Maciej W. Rozycki <macro@imgtec.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-11 02:18:07 -05:00
David Howells 102f4d900c FS-Cache: Handle a write to the page immediately beyond the EOF marker
Handle a write being requested to the page immediately beyond the EOF
marker on a cache object.  Currently this gets an assertion failure in
CacheFiles because the EOF marker is used there to encode information about
a partial page at the EOF - which could lead to an unknown blank spot in
the file if we extend the file over it.

The problem is actually in fscache where we check the index of the page
being written against store_limit.  store_limit is set to the number of
pages that we're allowed to store by fscache_set_store_limit() - which
means it's one more than the index of the last page we're allowed to store.
The problem is that we permit writing to a page with an index _equal_ to
the store limit - when we should reject that case.

Whilst we're at it, change the triggered assertion in CacheFiles to just
return -ENOBUFS instead.

The assertion failure looks something like this:

CacheFiles: Assertion failed
1000 < 7b1 is false
------------[ cut here ]------------
kernel BUG at fs/cachefiles/rdwr.c:962!
...
RIP: 0010:[<ffffffffa02c9e83>]  [<ffffffffa02c9e83>] cachefiles_write_page+0x273/0x2d0 [cachefiles]

Cc: stable@vger.kernel.org # v2.6.31+; earlier - that + backport of a17754f (at least)
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-11 02:11:02 -05:00
NeilBrown 95201a4060 cachefiles: perform test on s_blocksize when opening cache file.
cachefiles requires that s_blocksize in the cache is not greater than
PAGE_SIZE, and performs the check every time a block is accessed.

Move the test to the place where the file is "opened", where other
file-validity tests are performed.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-11 02:08:17 -05:00
Kinglong Mee b130ed5998 FS-Cache: Don't override netfs's primary_index if registering failed
Only override netfs->primary_index when registering success.

Cc: stable@vger.kernel.org # v2.6.30+
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-11 02:07:51 -05:00
Kinglong Mee 86108c2e34 FS-Cache: Increase reference of parent after registering, netfs success
If netfs exist, fscache should not increase the reference of parent's
usage and n_children, otherwise, never be decreased.

v2: thanks David's suggest,
 move increasing reference of parent if success
 use kmem_cache_free() freeing primary_index directly

v3: don't move "netfs->primary_index->parent = &fscache_fsdef_index;"

Cc: stable@vger.kernel.org # v2.6.30+
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-11 02:06:53 -05:00
Daniel Borkmann 0ee9608c89 debugfs: fix refcount imbalance in start_creating
In debugfs' start_creating(), we pin the file system to safely access
its root. When we failed to create a file, we unpin the file system via
failed_creating() to release the mount count and eventually the reference
of the vfsmount.

However, when we run into an error during lookup_one_len() when still
in start_creating(), we only release the parent's mutex but not so the
reference on the mount. Looks like it was done in the past, but after
splitting portions of __create_file() into start_creating() and
end_creating() via 190afd81e4 ("debugfs: split the beginning and the
end of __create_file() off"), this seemed missed. Noticed during code
review.

Fixes: 190afd81e4 ("debugfs: split the beginning and the end of __create_file() off")
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-11 02:04:44 -05:00
Zhao Lei d5f2e33b92 btrfs: Use fs_info directly in btrfs_delete_unused_bgs
No need to use root->fs_info in btrfs_delete_unused_bgs(),
use fs_info directly instead.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-10 19:27:24 -08:00
Zhao Lei 2c9fe83552 btrfs: Fix lost-data-profile caused by balance bg
Reproduce:
 (In integration-4.3 branch)

 TEST_DEV=(/dev/vdg /dev/vdh)
 TEST_DIR=/mnt/tmp

 umount "$TEST_DEV" >/dev/null
 mkfs.btrfs -f -d raid1 "${TEST_DEV[@]}"

 mount -o nospace_cache "$TEST_DEV" "$TEST_DIR"
 btrfs balance start -dusage=0 $TEST_DIR
 btrfs filesystem usage $TEST_DIR

 dd if=/dev/zero of="$TEST_DIR"/file count=100
 btrfs filesystem usage $TEST_DIR

Result:
 We can see "no data chunk" in first "btrfs filesystem usage":
 # btrfs filesystem usage $TEST_DIR
 Overall:
    ...
 Metadata,single: Size:8.00MiB, Used:0.00B
    /dev/vdg        8.00MiB
 Metadata,RAID1: Size:122.88MiB, Used:112.00KiB
    /dev/vdg      122.88MiB
    /dev/vdh      122.88MiB
 System,single: Size:4.00MiB, Used:0.00B
    /dev/vdg        4.00MiB
 System,RAID1: Size:8.00MiB, Used:16.00KiB
    /dev/vdg        8.00MiB
    /dev/vdh        8.00MiB
 Unallocated:
    /dev/vdg        1.06GiB
    /dev/vdh        1.07GiB

 And "data chunks changed from raid1 to single" in second
 "btrfs filesystem usage":
 # btrfs filesystem usage $TEST_DIR
 Overall:
    ...
 Data,single: Size:256.00MiB, Used:0.00B
    /dev/vdh      256.00MiB
 Metadata,single: Size:8.00MiB, Used:0.00B
    /dev/vdg        8.00MiB
 Metadata,RAID1: Size:122.88MiB, Used:112.00KiB
    /dev/vdg      122.88MiB
    /dev/vdh      122.88MiB
 System,single: Size:4.00MiB, Used:0.00B
    /dev/vdg        4.00MiB
 System,RAID1: Size:8.00MiB, Used:16.00KiB
    /dev/vdg        8.00MiB
    /dev/vdh        8.00MiB
 Unallocated:
    /dev/vdg        1.06GiB
    /dev/vdh      841.92MiB

Reason:
 btrfs balance delete last data chunk in case of no data in
 the filesystem, then we can see "no data chunk" by "fi usage"
 command.

 And when we do write operation to fs, the only available data
 profile is 0x0, result is all new chunks are allocated single type.

Fix:
 Allocate a data chunk explicitly to ensure we don't lose the
 raid profile for data.

Test:
 Test by above script, and confirmed the logic by debug output.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-10 19:27:20 -08:00
Zhao Lei aefbe9a633 btrfs: Fix lost-data-profile caused by auto removing bg
Reproduce:
 (In integration-4.3 branch)

 TEST_DEV=(/dev/vdg /dev/vdh)
 TEST_DIR=/mnt/tmp

 umount "$TEST_DEV" >/dev/null
 mkfs.btrfs -f -d raid1 "${TEST_DEV[@]}"

 mount -o nospace_cache "$TEST_DEV" "$TEST_DIR"
 umount "$TEST_DEV"

 mount -o nospace_cache "$TEST_DEV" "$TEST_DIR"
 btrfs filesystem usage $TEST_DIR

We can see the data chunk changed from raid1 to single:
 # btrfs filesystem usage $TEST_DIR
 Data,single: Size:8.00MiB, Used:0.00B
    /dev/vdg        8.00MiB
 #

Reason:
 When a empty filesystem mount with -o nospace_cache, the last
 data blockgroup will be auto-removed in umount.

 Then if we mount it again, there is no data chunk in the
 filesystem, so the only available data profile is 0x0, result
 is all new chunks are created as single type.

Fix:
 Don't auto-delete last blockgroup for a raid type.

Test:
 Test by above script, and confirmed the logic by debug output.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-10 19:27:16 -08:00
Zhao Lei 3b5753ec23 btrfs: Remove len argument from scrub_find_csum
It is useless.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-10 19:27:13 -08:00
Zhao Lei affe4a5ae1 btrfs: Reduce unnecessary arguments in scrub_recheck_block
We don't need pass so many arguments for recheck sblock now,
this patch cleans them.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-10 19:27:10 -08:00
Zhao Lei ba7cf9882b btrfs: Use scrub_checksum_data and scrub_checksum_tree_block for scrub_recheck_block_checksum
We can use existing scrub_checksum_data() and scrub_checksum_tree_block()
for scrub_recheck_block_checksum(), instead of write duplicated code.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-10 19:27:06 -08:00
Zhao Lei 772d233f5d btrfs: Reset sblock->xxx_error stats before calling scrub_recheck_block_checksum
We should reset sblock->xxx_error stats before calling
scrub_recheck_block_checksum().

Current code run correctly because all sblock are allocated by
k[cz]alloc(), and the error stats are not got changed.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-10 19:27:03 -08:00
Zhao Lei 4734b7ed79 btrfs: scrub: setup all fields for sblock_to_check
scrub_setup_recheck_block() isn't setup all necessary fields for
sblock_to_check because history reason.

So current code need more arguments in severial functions,
and more local variables, just to passing these lacked values to
necessary place.

This patch setup above fields to sblock_to_check in
scrub_setup_recheck_block(), for:
1: more cleanup for function arg, local variable
2: to make sblock_to_check complete, then we can use sblock_to_check
   without concern about some uninitialized member.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-10 19:27:00 -08:00
Zhao Lei 9799d2c32b btrfs: scrub: set error stats when tree block spanning stripes
It is better to show error stats to user when we found tree block
spanning stripes.

On a btrfs created by old version of btrfs-convert:
Before patch:
  # btrfs scrub start -B /dev/vdh
  scrub done for 8b342d35-2904-41ab-b3cb-2f929709cf47
          scrub started at Tue Aug 25 21:19:09 2015 and finished after 00:00:00
          total bytes scrubbed: 53.54MiB with 0 errors
  # dmesg
  ...
  [  128.711434] BTRFS error (device vdh): scrub: tree block 27054080 spanning stripes, ignored. logical=27000832
  [  128.712744] BTRFS error (device vdh): scrub: tree block 27054080 spanning stripes, ignored. logical=27066368
  ...

After patch:
  # btrfs scrub start -B /dev/vdh
  scrub done for ff7f844b-7a4e-4b1a-88a9-8252ab25be1b
          scrub started at Tue Aug 25 21:42:29 2015 and finished after 00:00:00
          total bytes scrubbed: 53.60MiB with 2 errors
          error details:
          corrected errors: 0, uncorrectable errors: 2, unverified errors: 0
  ERROR: There are uncorrectable errors.
  # dmesg
  ...omit...
  #

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-10 19:26:57 -08:00
Linus Torvalds 3419b45039 Merge branch 'for-4.4/io-poll' of git://git.kernel.dk/linux-block
Pull block IO poll support from Jens Axboe:
 "Various groups have been doing experimentation around IO polling for
  (really) fast devices.  The code has been reviewed and has been
  sitting on the side for a few releases, but this is now good enough
  for coordinated benchmarking and further experimentation.

  Currently O_DIRECT sync read/write are supported.  A framework is in
  the works that allows scalable stats tracking so we can auto-tune
  this.  And we'll add libaio support as well soon.  Fow now, it's an
  opt-in feature for test purposes"

* 'for-4.4/io-poll' of git://git.kernel.dk/linux-block:
  direct-io: be sure to assign dio->bio_bdev for both paths
  directio: add block polling support
  NVMe: add blk polling support
  block: add block polling support
  blk-mq: return tag/queue combo in the make_request_fn handlers
  block: change ->make_request_fn() and users to return a queue cookie
2015-11-10 17:23:49 -08:00
Linus Torvalds 01504f5e9e This pull request includes the following UBI/UBIFS changes:
* access time support for UBIFS by Dongsheng Yang
 * random cleanups and bug fixes all over the place
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABAgAGBQJWQmnVAAoJEEtJtSqsAOnWpnkP/0pUN+Cx58QJoJXxaSgClH/l
 QwYGznz4Fv3QuSafXJZy8CPzsTasaOOtoVKJPfPTvP8Drrl3FFbtdhqlqdx1YKqw
 DuKeViwmE/HF49a5pxgtR8032l35s3zZUWwd2yKA3B6SVEIsjAoWlIutyzKA/DiR
 R4mGVsfRevfzq1+l2YXGGZ8PJXMtRKnFTjzmIUJY0OeT3xCvl/uUFCid2x693aut
 GpJ6AMKGYcU+BuQJmb89wvdRYCHPdYEJr7TWq+GBxU3gDPlLY9302IhPq9ftv8Lp
 ClA0X3GZqVPR921XR+aA4ysRbfENT+UBewiBt2OEwQLnI6jxEn9EqsgErATxpOYy
 PEduYuU56mqc67EE4r7+YHfkidMSa8KrR9s+GpzR6JStW9HNGFDfGfCAK7BcdvWT
 +TuHfNk787Gbl4TO41iFI87s6zNQszYOpxBTEFYHx0FQWLNxD5c79UkisL+biqvJ
 bX8+7pClJQXcY0CXqe56GVQLC5v4HbvMmnstiNk52ihxEB0NT6htzWe/GPb/+UZ1
 K+kOAT54DPeag3FK4J1WZ57cYyJHdbyASB5vKvb+A1IwzrYFo8P35GekoWNK7eAJ
 Od5mb++7pTEFSH7oSwsprPOmrHLRmXgRG8yhLRfqX1ZwFeyFdqGQxjce9O/QB1jo
 jr4dxAY6Gnjdo1q07QSI
 =9n2S
 -----END PGP SIGNATURE-----

Merge tag 'upstream-4.4-rc1' of git://git.infradead.org/linux-ubifs

Pull UBI/UBIFS updates from Richard Weinberger:

 - access time support for UBIFS by Dongsheng Yang

 - random cleanups and bug fixes all over the place

* tag 'upstream-4.4-rc1' of git://git.infradead.org/linux-ubifs:
  ubifs: introduce UBIFS_ATIME_SUPPORT to ubifs
  ubifs: make ubifs_[get|set]xattr atomic
  UBIFS: Delete unnecessary checks before the function call "iput"
  UBI: Remove in vain semicolon
  UBI: Fastmap: Fix PEB array type
  UBIFS: Fix possible memory leak in ubifs_readdir()
  fs/ubifs: remove unnecessary new_valid_dev check
  ubi: fastmap: Implement produce_free_peb()
  UBIFS: print verbose message when rescanning a corrupted node
  UBIFS: call dbg_is_power_cut() instead of reading c->dbg->pc_happened
  UBI: drop null test before destroy functions
  UBI: Update comments to reflect UBI_METAONLY flag
  UBI: Fix debug message
  UBI: Fix typo in comment
  UBI: Fastmap: Simplify expression
  UBIFS: fix a typo in comment of ubifs_budget_req
  UBIFS: use kmemdup rather than duplicating its implementation
2015-11-10 16:35:06 -08:00
Linus Torvalds 264015f8a8 libnvdimm for 4.4:
1/ Add support for the ACPI 6.0 NFIT hot add mechanism to process
    updates of the NFIT at runtime.
 
 2/ Teach the coredump implementation how to filter out DAX mappings.
 
 3/ Introduce NUMA hints for allocations made by the pmem driver, and as
    a side effect all devm allocations now hint their NUMA node by
    default.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWQX2sAAoJEB7SkWpmfYgCWsEQAK7w/xM9zClVY/DDlFJxFtYq
 DZJ4faPj+E3FMTiJIEDzjtRgQvOFE+wmJtntYsCqKH/QZmpnyk9jeT/CbJzEEL2k
 WsAk+qHGLcVUlSb36blwN1RFzYqC+IDYThewJqUvxDbOwL1AbiibbX7gplzZHLhW
 +rj3ScVlSNOPRDgGGpkAeLNNsttuKvsGo7nB/JZopm0tV6g14rSK09wQbVhv6S6T
 Lu7VGYqnJlkteL9YlzRiROf9hW2ZFCMGJz1YZydPTy3aX3hGTBX4w2qvmsPwBIKP
 kW/gCNisVJGk1cZCk4joSJ8i/b3x3fE0zdZ5waivJ5jDvYbUUfyk0KtJkfw207Rl
 14yWitUC6aeVuCeOqXHgsjRi+1QVN9Pg7i49xgGiUN1igQiUYRTgQPWZxDv6Zo/s
 USrLFQBaRd+hJw+dl7A47lJ3mUF96tPCoQb4LCQ7DVsg5U4J2TvqXLH9Gek/CCZ4
 QsMkZDTQlZw4+JEDlzBgg/L7xVty8DadplTADMdjaRhFU3y8zKNJ85Ileokt7KVt
 IsBT4+S5HeZLvinZY95932DwAmFp1DtsyENd1BUXL06ddyvlQrFJ6NQaXji4fuDc
 EVQmMoTAqDujZFupMAux9vkUBDFj/hmaVD5F7j3+MWP87OCritw/IZn+2LgTaKoX
 EmttaYrDr2jJwIaGyw+H
 =a2/L
 -----END PGP SIGNATURE-----

Merge tag 'libnvdimm-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm updates from Dan Williams:
 "Outside of the new ACPI-NFIT hot-add support this pull request is more
  notable for what it does not contain, than what it does.  There were a
  handful of development topics this cycle, dax get_user_pages, dax
  fsync, and raw block dax, that need more more iteration and will wait
  for 4.5.

  The patches to make devm and the pmem driver NUMA aware have been in
  -next for several weeks.  The hot-add support has not, but is
  contained to the NFIT driver and is passing unit tests.  The coredump
  support is straightforward and was looked over by Jeff.  All of it has
  received a 0day build success notification across 107 configs.

  Summary:

   - Add support for the ACPI 6.0 NFIT hot add mechanism to process
     updates of the NFIT at runtime.

   - Teach the coredump implementation how to filter out DAX mappings.

   - Introduce NUMA hints for allocations made by the pmem driver, and
     as a side effect all devm allocations now hint their NUMA node by
     default"

* tag 'libnvdimm-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  coredump: add DAX filtering for FDPIC ELF coredumps
  coredump: add DAX filtering for ELF coredumps
  acpi: nfit: Add support for hot-add
  nfit: in acpi_nfit_init, break on a 0-length table
  pmem, memremap: convert to numa aware allocations
  devm_memremap_pages: use numa_mem_id
  devm: make allocations numa aware by default
  devm_memremap: convert to return ERR_PTR
  devm_memunmap: use devres_release()
  pmem: kill memremap_pmem()
  x86, mm: quiet arch_add_memory()
2015-11-10 12:07:22 -08:00
Linus Torvalds d55fc37856 Merge branch 'i2c/for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:

 - New drivers: UniPhier (with and without FIFO)

 - some drivers got some bigger rework: ismt, designware, img-scb (rcar
   had to be reverted because issues were showing up just lately)

 - ACPI: reworked the device scanning and added support for muxes

... and quite a lot of driver bugfixes and cleanups this time.  All
files touched outside of the i2c realm have proper acks.

* 'i2c/for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (70 commits)
  i2c: rcar: Revert the latest refactoring series
  i2c: pnx: remove superfluous assignment
  MAINTAINERS: i2c: drop i2c-pnx maintainer
  MAINTAINERS: i2c: mark also subdirectories as maintained
  i2c: cadence: enable driver for ARM64
  i2c: i801: Document Intel DNV and Broxton
  i2c: at91: manage unexpected RXRDY flag when starting a transfer
  i2c: pnx: Use setup_timer instead of open coding it
  i2c: add ACPI support for I2C mux ports
  acpi: add acpi_preset_companion() stub
  i2c: pxa: Add support for pxa910/988 & new configuration features
  i2c: au1550: Convert to devm_kzalloc and devm_ioremap_resource
  i2c-dev: Fix I2C_SLAVE ioctl comment
  i2c-dev: Fix typo in ioctl name reference
  i2c: sirf: tune the divider to make i2c bus freq more accurate
  i2c: imx: Use -ENXIO as error in the NACK case
  i2c: i801: Add support for Intel Broxton
  i2c: i801: Add support for Intel DNV
  i2c: mediatek: add i2c resume support
  i2c: imx: implement bus recovery
  ...
2015-11-10 11:58:25 -08:00
Jens Axboe c1c534609f direct-io: be sure to assign dio->bio_bdev for both paths
btrfs sets ->submit_io(), and we failed to set the block dev for
that path. That resulted in a potential NULL dereference when
we later wait for IO in dio_await_one().

Reported-by: kernel test robot <ying.huang@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-10 10:14:38 -07:00
Andrew Elble 7fc0564e3a nfsd: fix race with open / open upgrade stateids
We observed multiple open stateids on the server for files that
seemingly should have been closed.

nfsd4_process_open2() tests for the existence of a preexisting
stateid. If one is not found, the locks are dropped and a new
one is created. The problem is that init_open_stateid(), which
is also responsible for hashing the newly initialized stateid,
doesn't check to see if another open has raced in and created
a matching stateid. This fix is to enable init_open_stateid() to
return the matching stateid and have nfsd4_process_open2()
swap to that stateid and switch to the open upgrade path.
In testing this patch, coverage to the newly created
path indicates that the race was indeed happening.

Signed-off-by: Andrew Elble <aweits@rit.edu>
Reviewed-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-11-10 09:29:45 -05:00
Andrew Elble 34ed9872e7 nfsd: eliminate sending duplicate and repeated delegations
We've observed the nfsd server in a state where there are
multiple delegations on the same nfs4_file for the same client.
The nfs client does attempt to DELEGRETURN these when they are presented to
it - but apparently under some (unknown) circumstances the client does not
manage to return all of them. This leads to the eventual
attempt to CB_RECALL more than one delegation with the same nfs
filehandle to the same client. The first recall will succeed, but the
next recall will fail with NFS4ERR_BADHANDLE. This leads to the server
having delegations on cl_revoked that the client has no way to FREE
or DELEGRETURN, with resulting inability to recover. The state manager
on the server will continually assert SEQ4_STATUS_RECALLABLE_STATE_REVOKED,
and the state manager on the client will be looping unable to satisfy
the server.

List discussion also reports a race between OPEN and DELEGRETURN that
will be avoided by only sending the delegation once to the
client. This is also logically in accordance with RFC5561 9.1.1 and 10.2.

So, let's:

1.) Not hand out duplicate delegations.
2.) Only send them to the client once.

RFC 5561:

9.1.1:
"Delegations and layouts, on the other hand, are not associated with a
specific owner but are associated with the client as a whole
(identified by a client ID)."

10.2:
"...the stateid for a delegation is associated with a client ID and may be
used on behalf of all the open-owners for the given client.  A
delegation is made to the client as a whole and not to any specific
process or thread of control within it."

Reported-by: Eric Meddaugh <etmsys@rit.edu>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: Olga Kornievskaia <aglo@umich.edu>
Signed-off-by: Andrew Elble <aweits@rit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-11-10 09:29:44 -05:00
Jeff Layton 3e80dbcda7 nfsd: remove recurring workqueue job to clean DRC
We have a shrinker, we clean out the cache when nfsd is shut down, and
prune the chains on each request. A recurring workqueue job seems like
unnecessary overhead. Just remove it.

Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-11-10 09:25:51 -05:00
Roman Gushchin 3ca8138f01 fuse: break infinite loop in fuse_fill_write_pages()
I got a report about unkillable task eating CPU. Further
investigation shows, that the problem is in the fuse_fill_write_pages()
function. If iov's first segment has zero length, we get an infinite
loop, because we never reach iov_iter_advance() call.

Fix this by calling iov_iter_advance() before repeating an attempt to
copy data from userspace.

A similar problem is described in 124d3b7041 ("fix writev regression:
pan hanging unkillable and un-straceable"). If zero-length segmend
is followed by segment with invalid address,
iov_iter_fault_in_readable() checks only first segment (zero-length),
iov_iter_copy_from_user_atomic() skips it, fails at second and
returns zero -> goto again without skipping zero-length segment.

Patch calls iov_iter_advance() before goto again: we'll skip zero-length
segment at second iteraction and iov_iter_fault_in_readable() will detect
invalid address.

Special thanks to Konstantin Khlebnikov, who helped a lot with the commit
description.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Maxim Patlasov <mpatlasov@parallels.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Roman Gushchin <klamm@yandex-team.ru>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Fixes: ea9b9907b8 ("fuse: implement perform_write")
Cc: <stable@vger.kernel.org>
2015-11-10 10:32:37 +01:00
Miklos Szeredi 2c5816b4be cuse: fix memory leak
The problem is that fuse_dev_alloc() acquires an extra reference to cc.fc,
and the original ref count is never dropped.

Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Fixes: cc080e9e9b ("fuse: introduce per-instance fuse_dev structure")
Cc: <stable@vger.kernel.org> # v4.2+
2015-11-10 10:32:36 +01:00
Linus Torvalds bd4f203e43 Merge branch 'akpm' (patches from Andrew)
Merge third patch-bomb from Andrew Morton:
 "We're pretty much done over here - I'm still waiting for a nouveau
  merge so I can cleanly finish up Christoph's dma-mapping rework.

   - bunch of small misc stuff

   - fold abs64() into abs(), remove abs64()

   - new_valid_dev() cleanups

   - binfmt_elf_fdpic feature work"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (24 commits)
  fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries
  fs/stat.c: remove unnecessary new_valid_dev() check
  fs/reiserfs/namei.c: remove unnecessary new_valid_dev() check
  fs/nilfs2/namei.c: remove unnecessary new_valid_dev() check
  fs/ncpfs/dir.c: remove unnecessary new_valid_dev() check
  fs/jfs: remove unnecessary new_valid_dev() checks
  fs/hpfs/namei.c: remove unnecessary new_valid_dev() check
  fs/f2fs/namei.c: remove unnecessary new_valid_dev() check
  fs/ext2/namei.c: remove unnecessary new_valid_dev() check
  fs/exofs/namei.c: remove unnecessary new_valid_dev() check
  fs/btrfs/inode.c: remove unnecessary new_valid_dev() check
  fs/9p: remove unnecessary new_valid_dev() checks
  include/linux/kdev_t.h: old/new_valid_dev() can return bool
  include/linux/kdev_t.h: remove unused huge_valid_dev()
  kmap_atomic_to_page() has no users, remove it
  drivers/scsi/cxgbi: fix build with EXTRA_CFLAGS
  dma: remove external references to dma_supported
  Documentation/sysctl/vm.txt: fix misleading code reference of overcommit_memory
  remove abs64()
  kernel.h: make abs() work with 64-bit types
  ...
2015-11-09 21:05:13 -08:00
Linus Torvalds e6604ecb70 NFS client updates for Linux 4.4
Highlights include:
 
 Features:
 - RDMA client backchannel from Chuck
 - Support for NFSv4.2 file CLONE using the btrfs ioctl
 
 Bugfixes + cleanups
 - Move socket data receive out of the bottom halves and into a workqueue
 - Refactor NFSv4 error handling so synchronous and asynchronous RPC handles
   errors identically.
 - Fix a panic when blocks or object layouts reads return a bad data length
 - Fix nfsroot so it can handle a 1024 byte long path.
 - Fix bad usage of page offset in bl_read_pagelist
 - Various NFSv4 callback cleanups+fixes
 - Fix GETATTR bitmap verification
 - Support hexadecimal number for sunrpc debug sysctl files
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWQPMXAAoJEGcL54qWCgDy6ZUQAL32vpgyMXe7R4jcxoQxm52+
 tn8FrY8aBZAqucvQsIGCrYfE01W/s8goDTQdZODn0MCcoor12BTPVYNIR42/J/no
 MNnRTDF0dJ4WG+inX9G87XGG6sFN3wDaQcCaexknkQZlFNF4KthxojzR2BgjmRVI
 p3WKkLSNTt6DYQQ8eDetvKoDT0AjR/KCYm89tiE8GMhKYcaZl6dTazJxwOcp2CX9
 YDW6+fQbsv8qp5v2ay03e88O/DSmcNRFoxy/KUGT9OwJgdN08IN8fTt6GG38yycT
 D9tb9uObBRcll4PnucouadBcykGr6jAP0z8HklE266LH1dwYLOHQoDFdgAs0QGtq
 nlySiKvToj6CYXonXoPOjZF3P/lxlkj5ViZ2enBxgxrPmyWl172cUSa6NTXOMO46
 kPpxw50xa1gP5kkBVwIZ6XZuzl/5YRhB3BRP3g6yuJCbAwVBJvawYU7riC+6DEB9
 zygVfm21vi9juUQXJ37zXVRBTtoFhFjuSxcAYxc63o181lWYShKQ3IiRYg+zTxnq
 7DOhXa0ZNGvMgJJi0tH9Es3/S6TrGhyKh5gKY/o2XUjY0hCSsCSdP6jw6Mb9Ax1s
 0LzByHAikxBKPt2OFeoUgwycI2xqow4iAfuFk071iP7n0nwC804cUHSkGxW67dBZ
 Ve5Skkg1CV+oWQYxGmGZ
 =py1V
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-4.4-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  New features:
   - RDMA client backchannel from Chuck
   - Support for NFSv4.2 file CLONE using the btrfs ioctl

  Bugfixes + cleanups:
   - Move socket data receive out of the bottom halves and into a
     workqueue
   - Refactor NFSv4 error handling so synchronous and asynchronous RPC
     handles errors identically.
   - Fix a panic when blocks or object layouts reads return a bad data
     length
   - Fix nfsroot so it can handle a 1024 byte long path.
   - Fix bad usage of page offset in bl_read_pagelist
   - Various NFSv4 callback cleanups+fixes
   - Fix GETATTR bitmap verification
   - Support hexadecimal number for sunrpc debug sysctl files"

* tag 'nfs-for-4.4-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (53 commits)
  Sunrpc: Supports hexadecimal number for sysctl files of sunrpc debug
  nfs: Fix GETATTR bitmap verification
  nfs: Remove unused xdr page offsets in getacl/setacl arguments
  fs/nfs: remove unnecessary new_valid_dev check
  SUNRPC: fix variable type
  NFS: Enable client side NFSv4.1 backchannel to use other transports
  pNFS/flexfiles: Add support for FF_FLAGS_NO_IO_THRU_MDS
  pNFS/flexfiles: When mirrored, retry failed reads by switching mirrors
  SUNRPC: Remove the TCP-only restriction in bc_svc_process()
  svcrdma: Add backward direction service for RPC/RDMA transport
  xprtrdma: Handle incoming backward direction RPC calls
  xprtrdma: Add support for sending backward direction RPC replies
  xprtrdma: Pre-allocate Work Requests for backchannel
  xprtrdma: Pre-allocate backward rpc_rqst and send/receive buffers
  SUNRPC: Abstract backchannel operations
  xprtrdma: Saving IRQs no longer needed for rb_lock
  xprtrdma: Remove reply tasklet
  xprtrdma: Use workqueue to process RPC/RDMA replies
  xprtrdma: Replace send and receive arrays
  xprtrdma: Refactor reply handler error handling
  ...
2015-11-09 18:11:22 -08:00
Linus Torvalds 9d74288ca7 GFS2: merge window
Here is a list of patches we've accumulated for GFS2 for the current upstream
 merge window. There are only six patches this time:
 
 1. A cleanup patch from Andreas to remove the gl_spin #define in favor
    of its value for the sake of clarity.
 2. A fix from Andy Price to mark the inode dirty during fallocate.
 3. A fix from Andy Price to set s_mode on mount failures to prevent
    a stack trace.
 4. A patch from me to prevent a kernel BUG() in trans_add_meta/trans_add_data
    due to uninitialized storage.
 5. A patch from me to protecting our freeing of the in-core directory
    hash table to prevent double-free.
 6. A fix for a page/block rounding problem that resulted in a metadata
    coherency problem when the block size != page size.
 
 I've got a lot more patches in various stages of review and testing,
 but I'm afraid they'll have to wait until the next merge window. So
 next time we're likely to have a lot more.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWQMSyAAoJENeLYdPf93o7k+EH/inFFqkYxLCyXZngihTHdZvS
 tYAwYxPJw6UgSrZ1dY6iwcmhy6YgT7a98RJdPA3Kj0SvJxQVBiJ5uc0VKpK0bj72
 l7pVPkMEWCHs8u8RAIGfnik8y6IxOP35+EN0U/3ZLMG1Gc+Tmq9M8KLlnhfX980q
 oaniaDJAUaSSW8RxD2AKabxjoJ0DKnE6MtDHsL/JWhp1j5co5BbbwOzBmBa2mLCI
 RQ8YEvjqjtgm91g33pkxXJVMjAkFqLjRSVfomd5MSQWRUb+eGIpd3LFThHzVfm55
 2f4j2kd2V4i7rTrh8Q3RdoYRoFgpXyxXQ3R2UYL59b7B2DvGTyAKyDxfU237ZXQ=
 =yanT
 -----END PGP SIGNATURE-----

Merge tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2

Pull gfs2 updates from Bob Peterson:
 "Here is a list of patches we've accumulated for GFS2 for the current
  upstream merge window.  There are only six patches this time:

   1. A cleanup patch from Andreas to remove the gl_spin #define in favor
      of its value for the sake of clarity.
   2. A fix from Andy Price to mark the inode dirty during fallocate.
   3. A fix from Andy Price to set s_mode on mount failures to prevent a
      stack trace.
   4  A patch from me to prevent a kernel BUG() in trans_add_meta/trans_add_data
      due to uninitialized storage.
   5. A patch from me to protecting our freeing of the in-core directory
      hash table to prevent double-free.
   6. A fix for a page/block rounding problem that resulted in a metadata
      coherency problem when the block size != page size"

  I've got a lot more patches in various stages of review and testing,
  but I'm afraid they'll have to wait until the next merge window.  So
  next time we're likely to have a lot more"

* tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  GFS2: Fix rgrp end rounding problem for bsize < page size
  GFS2: Protect freeing directory hash table with i_lock spin_lock
  gfs2: Remove gl_spin define
  gfs2: Add missing else in trans_add_meta/data
  GFS2: Set s_mode before parsing mount options
  GFS2: fallocate: do not rely on file_update_time to mark the inode dirty
2015-11-09 18:01:23 -08:00
Linus Torvalds 123a28d8b5 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2 fix from Jan Kara:
 "Fix for DAX on ext2"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  ext2: Add locking for DAX faults
2015-11-09 17:38:34 -08:00
Linus Torvalds e4da7e9a54 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu/coldfire fix from Greg Ungerer:
 "Only a single patch, fixes brk area setup problem in nommu
  environments"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  fs/binfmt_elf_fdpic.c: fix brk area overlap with stack on NOMMU
2015-11-09 16:22:26 -08:00
Dave Chinner 4e14e49a91 Merge branch 'xfs-misc-fixes-for-4.4-3' into for-next 2015-11-10 10:20:48 +11:00
Rich Felker 1bde925d23 fs/binfmt_elf_fdpic.c: provide NOMMU loader for regular ELF binaries
The ELF binary loader in binfmt_elf.c requires an MMU, making it
impossible to use regular ELF binaries on NOMMU archs.  However, the FDPIC
ELF loader in binfmt_elf_fdpic.c is fully capable as a loader for plain
ELF, which requires constant displacements between LOAD segments, since it
already supports FDPIC ELF files flagged as needing constant displacement.

This patch adjusts the FDPIC ELF loader to accept non-FDPIC ELF files on
NOMMU archs.  They are treated identically to FDPIC ELF files with the
constant-displacement flag bit set, except for personality, which must
match the ABI of the program being loaded; the PER_LINUX_FDPIC personality
controls how the kernel interprets function pointers passed to sigaction.

Files that do not set a stack size requirement explicitly are given a
default stack size (matching the amount of committed stack the normal ELF
loader for MMU archs would give them) rather than being rejected; this is
necessary because plain ELF files generally do not declare stack
requirements in theit program headers.

Only ET_DYN (PIE) format ELF files are supported, since loading at a fixed
virtual address is not possible on NOMMU.

This patch was developed and tested on J2 (SH2-compatible) but should
be usable immediately on all archs where binfmt_elf_fdpic is
available. Moreover, by providing dummy definitions of the
elf_check_fdpic() and elf_check_const_displacement() macros for archs
which lack an FDPIC ABI, it should be possible to enable building of
binfmt_elf_fdpic on all other NOMMU archs and thereby give them ELF
binary support, but I have not yet tested this.

The motivation for using binfmt_elf_fdpic.c rather than adapting
binfmt_elf.c to NOMMU is that the former already has all the necessary
code to work properly on NOMMU and has already received widespread
real-world use and testing. I hope this is not controversial.

I'm not really happy with having to unset the FDPIC_FUNCPTRS
personality bit when loading non-FDPIC ELF. This bit should really
reset automatically on execve, since otherwise, executing non-ELF
binaries (e.g. bFLT) from an FDPIC process will leave the personality
in the wrong state and severely break signal handling. But that's a
separate, existing bug and I don't know the right place to fix it.

Signed-off-by: Rich Felker <dalias@libc.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Oleg Endo <oleg.endo@t-online.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 15:11:24 -08:00
Yaowei Bai 28f65708a5 fs/stat.c: remove unnecessary new_valid_dev() check
new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed.  Remove it.

Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 15:11:24 -08:00
Yaowei Bai 3cc5d9a905 fs/reiserfs/namei.c: remove unnecessary new_valid_dev() check
new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed.  Remove it.

Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 15:11:24 -08:00
Yaowei Bai 3348a172be fs/nilfs2/namei.c: remove unnecessary new_valid_dev() check
new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed.  Remove it.

Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 15:11:24 -08:00
Yaowei Bai 4467e29f0c fs/ncpfs/dir.c: remove unnecessary new_valid_dev() check
new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed.  Remove it.

Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Petr Vandrovec <petr@vandrovec.name>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 15:11:24 -08:00
Yaowei Bai a2a1704409 fs/jfs: remove unnecessary new_valid_dev() checks
new_valid_dev() always returns 1, so the !new_valid_dev() checks are not
needed.  Remove them.

Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 15:11:24 -08:00
Yaowei Bai fdca5e6a6d fs/hpfs/namei.c: remove unnecessary new_valid_dev() check
new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed.  Remove it.

Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 15:11:24 -08:00
Yaowei Bai a8415e4b13 fs/f2fs/namei.c: remove unnecessary new_valid_dev() check
new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed.  Remove it.

Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Changman Lee <cm224.lee@samsung.com>
Cc: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 15:11:24 -08:00
Yaowei Bai d7df00072e fs/ext2/namei.c: remove unnecessary new_valid_dev() check
new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed.  Remove it.

Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 15:11:24 -08:00
Yaowei Bai 5738939289 fs/exofs/namei.c: remove unnecessary new_valid_dev() check
new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed.  Remove it.

Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Acked-by: Boaz Harrosh <ooo@electrozaur.com>
Cc: Benny Halevy <bhalevy@primarydata.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 15:11:24 -08:00
Yaowei Bai 7cac0a8599 fs/btrfs/inode.c: remove unnecessary new_valid_dev() check
new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed.  Remove it.

Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 15:11:24 -08:00
Yaowei Bai 349c7037b1 fs/9p: remove unnecessary new_valid_dev() checks
new_valid_dev() always returns 1, so the !new_valid_dev() check is not
needed.  Remove it.

Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 15:11:24 -08:00
Andrew Morton 79211c8ed1 remove abs64()
Switch everything to the new and more capable implementation of abs().
Mainly to give the new abs() a bit of a workout.

Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 15:11:24 -08:00
Randy Dunlap dbce03b9e3 fs/writeback.c: fix kernel-doc warnings
Fix kernel-doc warnings in fs/fs-writeback.c by moving a #define macro to
after the function's opening brace.  Also #undef this macro at the end of
the function.

  ../fs/fs-writeback.c:1984: warning: Excess function parameter 'inode' description in 'I_DIRTY_INODE'
  ../fs/fs-writeback.c:1984: warning: Excess function parameter 'flags' description in 'I_DIRTY_INODE'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 15:11:24 -08:00
Randy Dunlap 30fdc8ee0e fs/inode.c: fix kernel-doc warning
Fix kernel-doc warning in fs/inode.c:

  ../fs/inode.c:1606: warning: No description found for parameter 'inode'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-09 15:11:24 -08:00
Chris Mason 7a29ac474a xfs: give all workqueues rescuer threads
We're consistently hitting deadlocks here with XFS on recent kernels.
After some digging through the crash files, it looks like everyone in
the system is waiting for XFS to reclaim memory.

Something like this:

PID: 2733434  TASK: ffff8808cd242800  CPU: 19  COMMAND: "java"
 #0 [ffff880019c53588] __schedule at ffffffff818c4df2
 #1 [ffff880019c535d8] schedule at ffffffff818c5517
 #2 [ffff880019c535f8] _xfs_log_force_lsn at ffffffff81316348
 #3 [ffff880019c53688] xfs_log_force_lsn at ffffffff813164fb
 #4 [ffff880019c536b8] xfs_iunpin_wait at ffffffff8130835e
 #5 [ffff880019c53728] xfs_reclaim_inode at ffffffff812fd453
 #6 [ffff880019c53778] xfs_reclaim_inodes_ag at ffffffff812fd8c7
 #7 [ffff880019c53928] xfs_reclaim_inodes_nr at ffffffff812fe433
 #8 [ffff880019c53958] xfs_fs_free_cached_objects at ffffffff8130d3b9
 #9 [ffff880019c53968] super_cache_scan at ffffffff811a6f73
#10 [ffff880019c539c8] shrink_slab at ffffffff811460e6
#11 [ffff880019c53aa8] shrink_zone at ffffffff8114a53f
#12 [ffff880019c53b48] do_try_to_free_pages at ffffffff8114a8ba
#13 [ffff880019c53be8] try_to_free_pages at ffffffff8114ad5a
#14 [ffff880019c53c78] __alloc_pages_nodemask at ffffffff8113e1b8
#15 [ffff880019c53d88] alloc_kmem_pages_node at ffffffff8113e671
#16 [ffff880019c53dd8] copy_process at ffffffff8104f781
#17 [ffff880019c53ec8] do_fork at ffffffff8105129c
#18 [ffff880019c53f38] sys_clone at ffffffff810515b6
#19 [ffff880019c53f48] stub_clone at ffffffff818c8e4d

xfs_log_force_lsn is waiting for logs to get cleaned, which is waiting
for IO, which is waiting for workers to complete the IO which is waiting
for worker threads that don't exist yet:

PID: 2752451  TASK: ffff880bd6bdda00  CPU: 37  COMMAND: "kworker/37:1"
 #0 [ffff8808d20abbb0] __schedule at ffffffff818c4df2
 #1 [ffff8808d20abc00] schedule at ffffffff818c5517
 #2 [ffff8808d20abc20] schedule_timeout at ffffffff818c7c6c
 #3 [ffff8808d20abcc0] wait_for_completion_killable at ffffffff818c6495
 #4 [ffff8808d20abd30] kthread_create_on_node at ffffffff8106ec82
 #5 [ffff8808d20abdf0] create_worker at ffffffff8106752f
 #6 [ffff8808d20abe40] worker_thread at ffffffff810699be
 #7 [ffff8808d20abec0] kthread at ffffffff8106ef59
 #8 [ffff8808d20abf50] ret_from_fork at ffffffff818c8ac8

I think we should be using WQ_MEM_RECLAIM to make sure this thread
pool makes progress when we're not able to allocate new workers.

[dchinner: make all workqueues WQ_MEM_RECLAIM]

Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-11-10 10:10:34 +11:00
Brian Foster 848ccfc8fe xfs: fix log recovery op header validation assert
Commit 89cebc84 ("xfs: validate transaction header length on log
recovery") added additional validation of the on-disk op header length
to protect from buffer overflow during log recovery. It accounts for the
fact that the transaction header can be split across multiple op
headers. It added an assert for when this occurs that verifies the
length of the second part of a split transaction header is less than a
full transaction header. In other words, it expects that the first op
header of a split transaction header includes at least some portion of
the transaction header.

This expectation is not always valid as a zero-length op header can
exist for the first op header of a split transaction header (see
xlog_recover_add_to_trans() for details). This means that the second op
header can have a valid, full length transaction header and thus the
full header is copied in xlog_recover_add_to_cont_trans(). Fix the
assert in xlog_recover_add_to_cont_trans() to handle this case correctly
and require that the op header length is less than or equal to a full
transaction header.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-11-10 10:10:33 +11:00
Andreas Gruenbacher edfb8ebce2 xfs: Fix error path in xfs_get_acl
Error codes from xfs_attr_get other than -ENOATTR were not properly
reported.  Fix that.

In addition, the declaration of struct xfs_inode in xfs_acl.h isn't needed.

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-11-10 10:09:45 +11:00
Filipe Manana f1cd1f0b7d Btrfs: fix race when listing an inode's xattrs
When listing a inode's xattrs we have a time window where we race against
a concurrent operation for adding a new hard link for our inode that makes
us not return any xattr to user space. In order for this to happen, the
first xattr of our inode needs to be at slot 0 of a leaf and the previous
leaf must still have room for an inode ref (or extref) item, and this can
happen because an inode's listxattrs callback does not lock the inode's
i_mutex (nor does the VFS does it for us), but adding a hard link to an
inode makes the VFS lock the inode's i_mutex before calling the inode's
link callback.

If we have the following leafs:

               Leaf X (has N items)                    Leaf Y

 [ ... (257 INODE_ITEM 0) (257 INODE_REF 256) ]  [ (257 XATTR_ITEM 12345), ... ]
           slot N - 2         slot N - 1              slot 0

The race illustrated by the following sequence diagram is possible:

       CPU 1                                               CPU 2

  btrfs_listxattr()

    searches for key (257 XATTR_ITEM 0)

    gets path with path->nodes[0] == leaf X
    and path->slots[0] == N

    because path->slots[0] is >=
    btrfs_header_nritems(leaf X), it calls
    btrfs_next_leaf()

    btrfs_next_leaf()
      releases the path

                                                   adds key (257 INODE_REF 666)
                                                   to the end of leaf X (slot N),
                                                   and leaf X now has N + 1 items

      searches for the key (257 INODE_REF 256),
      with path->keep_locks == 1, because that
      is the last key it saw in leaf X before
      releasing the path

      ends up at leaf X again and it verifies
      that the key (257 INODE_REF 256) is no
      longer the last key in leaf X, so it
      returns with path->nodes[0] == leaf X
      and path->slots[0] == N, pointing to
      the new item with key (257 INODE_REF 666)

    btrfs_listxattr's loop iteration sees that
    the type of the key pointed by the path is
    different from the type BTRFS_XATTR_ITEM_KEY
    and so it breaks the loop and stops looking
    for more xattr items
      --> the application doesn't get any xattr
          listed for our inode

So fix this by breaking the loop only if the key's type is greater than
BTRFS_XATTR_ITEM_KEY and skip the current key if its type is smaller.

Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
2015-11-09 18:34:40 +00:00
Ross Zwisler ab27a8d04b coredump: add DAX filtering for FDPIC ELF coredumps
Add explicit filtering for DAX mappings to FDPIC ELF coredump.  This is
useful because DAX mappings have the potential to be very large.

This patch has only been compile tested.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-09 13:29:54 -05:00
Ross Zwisler 5037835c1f coredump: add DAX filtering for ELF coredumps
Add two new flags to the existing coredump mechanism for ELF files to
allow us to explicitly filter DAX mappings.  This is desirable because
DAX mappings, like hugetlb mappings, have the potential to be very
large.

Update the coredump_filter documentation in
Documentation/filesystems/proc.txt so that it addresses the new DAX
coredump flags.  Also update the documented default value of
coredump_filter to be consistent with the core(5) man page.  The
documentation being updated talks about bit 4, Dump ELF headers, which
is enabled if CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is turned on in the
kernel config.  This kernel config option defaults to "y" if both ELF
binaries and coredump are enabled.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-09 13:29:54 -05:00
Bob Peterson 31dddd9eb9 GFS2: Fix rgrp end rounding problem for bsize < page size
This patch fixes a bug introduced by commit 7005c3e. That patch
tries to map a vm range for resource groups, but the calculation
breaks down when the block size is less than the page size.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2015-11-09 09:38:02 -06:00
Steve French 7b52e2793a Allow copy offload (CopyChunk) across shares
FSCTL_SRV_COPYCHUNK_WRITE only requires that the source and target
be on the same server (not the same volume or same share),
so relax the existing check (which required them to be on
the same share). Note that this works to Windows (and presumably
most other NAS) but Samba requires that the source
and target be on the same share.  Moving a file across
shares is a common use case and can be very heplful (100x faster).

Signed-off-by: Steve French <steve.french@primarydata.com>
Reviewed-by: David Disseldorp <ddiss@samba.org>
2015-11-09 09:28:48 -06:00
Filipe Manana 1d512cb77b Btrfs: fix race leading to BUG_ON when running delalloc for nodatacow
If we are using the NO_HOLES feature, we have a tiny time window when
running delalloc for a nodatacow inode where we can race with a concurrent
link or xattr add operation leading to a BUG_ON.

This happens because at run_delalloc_nocow() we end up casting a leaf item
of type BTRFS_INODE_[REF|EXTREF]_KEY or of type BTRFS_XATTR_ITEM_KEY to a
file extent item (struct btrfs_file_extent_item) and then analyse its
extent type field, which won't match any of the expected extent types
(values BTRFS_FILE_EXTENT_[REG|PREALLOC|INLINE]) and therefore trigger an
explicit BUG_ON(1).

The following sequence diagram shows how the race happens when running a
no-cow dellaloc range [4K, 8K[ for inode 257 and we have the following
neighbour leafs:

             Leaf X (has N items)                    Leaf Y

 [ ... (257 INODE_ITEM 0) (257 INODE_REF 256) ]  [ (257 EXTENT_DATA 8192), ... ]
              slot N - 2         slot N - 1              slot 0

 (Note the implicit hole for inode 257 regarding the [0, 8K[ range)

       CPU 1                                         CPU 2

 run_dealloc_nocow()
   btrfs_lookup_file_extent()
     --> searches for a key with value
         (257 EXTENT_DATA 4096) in the
         fs/subvol tree
     --> returns us a path with
         path->nodes[0] == leaf X and
         path->slots[0] == N

   because path->slots[0] is >=
   btrfs_header_nritems(leaf X), it
   calls btrfs_next_leaf()

   btrfs_next_leaf()
     --> releases the path

                                              hard link added to our inode,
                                              with key (257 INODE_REF 500)
                                              added to the end of leaf X,
                                              so leaf X now has N + 1 keys

     --> searches for the key
         (257 INODE_REF 256), because
         it was the last key in leaf X
         before it released the path,
         with path->keep_locks set to 1

     --> ends up at leaf X again and
         it verifies that the key
         (257 INODE_REF 256) is no longer
         the last key in the leaf, so it
         returns with path->nodes[0] ==
         leaf X and path->slots[0] == N,
         pointing to the new item with
         key (257 INODE_REF 500)

   the loop iteration of run_dealloc_nocow()
   does not break out the loop and continues
   because the key referenced in the path
   at path->nodes[0] and path->slots[0] is
   for inode 257, its type is < BTRFS_EXTENT_DATA_KEY
   and its offset (500) is less then our delalloc
   range's end (8192)

   the item pointed by the path, an inode reference item,
   is (incorrectly) interpreted as a file extent item and
   we get an invalid extent type, leading to the BUG_ON(1):

   if (extent_type == BTRFS_FILE_EXTENT_REG ||
      extent_type == BTRFS_FILE_EXTENT_PREALLOC) {
       (...)
   } else if (extent_type == BTRFS_FILE_EXTENT_INLINE) {
       (...)
   } else {
       BUG_ON(1)
   }

The same can happen if a xattr is added concurrently and ends up having
a key with an offset smaller then the delalloc's range end.

So fix this by skipping keys with a type smaller than
BTRFS_EXTENT_DATA_KEY.

Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
2015-11-09 11:29:14 +00:00
Filipe Manana aeafbf8486 Btrfs: fix race leading to incorrect item deletion when dropping extents
While running a stress test I got the following warning triggered:

  [191627.672810] ------------[ cut here ]------------
  [191627.673949] WARNING: CPU: 8 PID: 8447 at fs/btrfs/file.c:779 __btrfs_drop_extents+0x391/0xa50 [btrfs]()
  (...)
  [191627.701485] Call Trace:
  [191627.702037]  [<ffffffff8145f077>] dump_stack+0x4f/0x7b
  [191627.702992]  [<ffffffff81095de5>] ? console_unlock+0x356/0x3a2
  [191627.704091]  [<ffffffff8104b3b0>] warn_slowpath_common+0xa1/0xbb
  [191627.705380]  [<ffffffffa0664499>] ? __btrfs_drop_extents+0x391/0xa50 [btrfs]
  [191627.706637]  [<ffffffff8104b46d>] warn_slowpath_null+0x1a/0x1c
  [191627.707789]  [<ffffffffa0664499>] __btrfs_drop_extents+0x391/0xa50 [btrfs]
  [191627.709155]  [<ffffffff8115663c>] ? cache_alloc_debugcheck_after.isra.32+0x171/0x1d0
  [191627.712444]  [<ffffffff81155007>] ? kmemleak_alloc_recursive.constprop.40+0x16/0x18
  [191627.714162]  [<ffffffffa06570c9>] insert_reserved_file_extent.constprop.40+0x83/0x24e [btrfs]
  [191627.715887]  [<ffffffffa065422b>] ? start_transaction+0x3bb/0x610 [btrfs]
  [191627.717287]  [<ffffffffa065b604>] btrfs_finish_ordered_io+0x273/0x4e2 [btrfs]
  [191627.728865]  [<ffffffffa065b888>] finish_ordered_fn+0x15/0x17 [btrfs]
  [191627.730045]  [<ffffffffa067d688>] normal_work_helper+0x14c/0x32c [btrfs]
  [191627.731256]  [<ffffffffa067d96a>] btrfs_endio_write_helper+0x12/0x14 [btrfs]
  [191627.732661]  [<ffffffff81061119>] process_one_work+0x24c/0x4ae
  [191627.733822]  [<ffffffff810615b0>] worker_thread+0x206/0x2c2
  [191627.734857]  [<ffffffff810613aa>] ? process_scheduled_works+0x2f/0x2f
  [191627.736052]  [<ffffffff810613aa>] ? process_scheduled_works+0x2f/0x2f
  [191627.737349]  [<ffffffff810669a6>] kthread+0xef/0xf7
  [191627.738267]  [<ffffffff810f3b3a>] ? time_hardirqs_on+0x15/0x28
  [191627.739330]  [<ffffffff810668b7>] ? __kthread_parkme+0xad/0xad
  [191627.741976]  [<ffffffff81465592>] ret_from_fork+0x42/0x70
  [191627.743080]  [<ffffffff810668b7>] ? __kthread_parkme+0xad/0xad
  [191627.744206] ---[ end trace bbfddacb7aaada8d ]---

  $ cat -n fs/btrfs/file.c
  691  int __btrfs_drop_extents(struct btrfs_trans_handle *trans,
  (...)
  758                  btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
  759                  if (key.objectid > ino ||
  760                      key.type > BTRFS_EXTENT_DATA_KEY || key.offset >= end)
  761                          break;
  762
  763                  fi = btrfs_item_ptr(leaf, path->slots[0],
  764                                      struct btrfs_file_extent_item);
  765                  extent_type = btrfs_file_extent_type(leaf, fi);
  766
  767                  if (extent_type == BTRFS_FILE_EXTENT_REG ||
  768                      extent_type == BTRFS_FILE_EXTENT_PREALLOC) {
  (...)
  774                  } else if (extent_type == BTRFS_FILE_EXTENT_INLINE) {
  (...)
  778                  } else {
  779                          WARN_ON(1);
  780                          extent_end = search_start;
  781                  }
  (...)

This happened because the item we were processing did not match a file
extent item (its key type != BTRFS_EXTENT_DATA_KEY), and even on this
case we cast the item to a struct btrfs_file_extent_item pointer and
then find a type field value that does not match any of the expected
values (BTRFS_FILE_EXTENT_[REG|PREALLOC|INLINE]). This scenario happens
due to a tiny time window where a race can happen as exemplified below.
For example, consider the following scenario where we're using the
NO_HOLES feature and we have the following two neighbour leafs:

               Leaf X (has N items)                    Leaf Y

[ ... (257 INODE_ITEM 0) (257 INODE_REF 256) ]  [ (257 EXTENT_DATA 8192), ... ]
          slot N - 2         slot N - 1              slot 0

Our inode 257 has an implicit hole in the range [0, 8K[ (implicit rather
than explicit because NO_HOLES is enabled). Now if our inode has an
ordered extent for the range [4K, 8K[ that is finishing, the following
can happen:

          CPU 1                                       CPU 2

  btrfs_finish_ordered_io()
    insert_reserved_file_extent()
      __btrfs_drop_extents()
         Searches for the key
          (257 EXTENT_DATA 4096) through
          btrfs_lookup_file_extent()

         Key not found and we get a path where
         path->nodes[0] == leaf X and
         path->slots[0] == N

         Because path->slots[0] is >=
         btrfs_header_nritems(leaf X), we call
         btrfs_next_leaf()

         btrfs_next_leaf() releases the path

                                                  inserts key
                                                  (257 INODE_REF 4096)
                                                  at the end of leaf X,
                                                  leaf X now has N + 1 keys,
                                                  and the new key is at
                                                  slot N

         btrfs_next_leaf() searches for
         key (257 INODE_REF 256), with
         path->keep_locks set to 1,
         because it was the last key it
         saw in leaf X

           finds it in leaf X again and
           notices it's no longer the last
           key of the leaf, so it returns 0
           with path->nodes[0] == leaf X and
           path->slots[0] == N (which is now
           < btrfs_header_nritems(leaf X)),
           pointing to the new key
           (257 INODE_REF 4096)

         __btrfs_drop_extents() casts the
         item at path->nodes[0], slot
         path->slots[0], to a struct
         btrfs_file_extent_item - it does
         not skip keys for the target
         inode with a type less than
         BTRFS_EXTENT_DATA_KEY
         (BTRFS_INODE_REF_KEY < BTRFS_EXTENT_DATA_KEY)

         sees a bogus value for the type
         field triggering the WARN_ON in
         the trace shown above, and sets
         extent_end = search_start (4096)

         does the if-then-else logic to
         fixup 0 length extent items created
         by a past bug from hole punching:

           if (extent_end == key.offset &&
               extent_end >= search_start)
               goto delete_extent_item;

         that evaluates to true and it ends
         up deleting the key pointed to by
         path->slots[0], (257 INODE_REF 4096),
         from leaf X

The same could happen for example for a xattr that ends up having a key
with an offset value that matches search_start (very unlikely but not
impossible).

So fix this by ensuring that keys smaller than BTRFS_EXTENT_DATA_KEY are
skipped, never casted to struct btrfs_file_extent_item and never deleted
by accident. Also protect against the unexpected case of getting a key
for a lower inode number by skipping that key and issuing a warning.

Cc: stable@vger.kernel.org
Signed-off-by: Filipe Manana <fdmanana@suse.com>
2015-11-08 21:51:28 +00:00
Linus Torvalds ad804a0b2a Merge branch 'akpm' (patches from Andrew)
Merge second patch-bomb from Andrew Morton:

 - most of the rest of MM

 - procfs

 - lib/ updates

 - printk updates

 - bitops infrastructure tweaks

 - checkpatch updates

 - nilfs2 update

 - signals

 - various other misc bits: coredump, seqfile, kexec, pidns, zlib, ipc,
   dma-debug, dma-mapping, ...

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (102 commits)
  ipc,msg: drop dst nil validation in copy_msg
  include/linux/zutil.h: fix usage example of zlib_adler32()
  panic: release stale console lock to always get the logbuf printed out
  dma-debug: check nents in dma_sync_sg*
  dma-mapping: tidy up dma_parms default handling
  pidns: fix set/getpriority and ioprio_set/get in PRIO_USER mode
  kexec: use file name as the output message prefix
  fs, seqfile: always allow oom killer
  seq_file: reuse string_escape_str()
  fs/seq_file: use seq_* helpers in seq_hex_dump()
  coredump: change zap_threads() and zap_process() to use for_each_thread()
  coredump: ensure all coredumping tasks have SIGNAL_GROUP_COREDUMP
  signal: remove jffs2_garbage_collect_thread()->allow_signal(SIGCONT)
  signal: introduce kernel_signal_stop() to fix jffs2_garbage_collect_thread()
  signal: turn dequeue_signal_lock() into kernel_dequeue_signal()
  signals: kill block_all_signals() and unblock_all_signals()
  nilfs2: fix gcc uninitialized-variable warnings in powerpc build
  nilfs2: fix gcc unused-but-set-variable warnings
  MAINTAINERS: nilfs2: add header file for tracing
  nilfs2: add tracepoints for analyzing reading and writing metadata files
  ...
2015-11-07 14:32:45 -08:00
Linus Torvalds 75021d2859 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial updates from Jiri Kosina:
 "Trivial stuff from trivial tree that can be trivially summed up as:

   - treewide drop of spurious unlikely() before IS_ERR() from Viresh
     Kumar

   - cosmetic fixes (that don't really affect basic functionality of the
     driver) for pktcdvd and bcache, from Julia Lawall and Petr Mladek

   - various comment / printk fixes and updates all over the place"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  bcache: Really show state of work pending bit
  hwmon: applesmc: fix comment typos
  Kconfig: remove comment about scsi_wait_scan module
  class_find_device: fix reference to argument "match"
  debugfs: document that debugfs_remove*() accepts NULL and error values
  net: Drop unlikely before IS_ERR(_OR_NULL)
  mm: Drop unlikely before IS_ERR(_OR_NULL)
  fs: Drop unlikely before IS_ERR(_OR_NULL)
  drivers: net: Drop unlikely before IS_ERR(_OR_NULL)
  drivers: misc: Drop unlikely before IS_ERR(_OR_NULL)
  UBI: Update comments to reflect UBI_METAONLY flag
  pktcdvd: drop null test before destroy functions
2015-11-07 13:05:44 -08:00
Jens Axboe 15c4f638f3 directio: add block polling support
This adds support for sync O_DIRECT read/write poll support.

Signed-off-by: Jens Axboe <axboe@fb.com>
[hch: split from a larger patch, minor updates]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
2015-11-07 10:40:47 -07:00
Dongsheng Yang 8c1c5f2638 ubifs: introduce UBIFS_ATIME_SUPPORT to ubifs
To make ubifs support atime flexily, this commit introduces
a Kconfig option named as UBIFS_ATIME_SUPPORT.

With UBIFS_ATIME_SUPPORT=n:
	ubifs keeps the full compatibility to no_atime from
the start of ubifs.

=================UBIFS_ATIME_SUPPORT=n=======================
-o - no atime
-o atime - no atime
-o noatime - no atime
-o relatime - no atime
-o strictatime - no atime
-o lazyatime - no atime

With UBIFS_ATIME_SUPPORT=y:
	ubifs supports the atime same with other main stream
file systems.
=================UBIFS_ATIME_SUPPORT=y=======================
-o - default behavior (relatime currently)
-o atime - atime support
-o noatime - no atime support
-o relatime - relative atime support
-o strictatime - strict atime support
-o lazyatime - lazy atime support

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-11-07 11:35:08 +01:00
Dongsheng Yang ab92a20bce ubifs: make ubifs_[get|set]xattr atomic
This commit make the ubifs_[get|set]xattr protected by ui_mutex.

Originally, there is a possibility that ubifs_getxattr to get
a wrong value.

  P1                                  P2
----------                  	----------
ubifs_getxattr                      ubifs_setxattr
					- kfree()
- memcpy()
					- kmemdup()

Then ubifs_getxattr() would get a non-sense data. To solve this
problem, this commit make the xattr of ubifs_inode updated in
atomic.

Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-11-07 11:33:17 +01:00
Greg Thelen 0f930902eb fs, seqfile: always allow oom killer
Since 5cec38ac86 ("fs, seq_file: fallback to vmalloc instead of oom kill
processes") seq_buf_alloc() avoids calling the oom killer for PAGE_SIZE or
smaller allocations; but larger allocations can use the oom killer via
vmalloc().  Thus reads of small files can return ENOMEM, but larger files
use the oom killer to avoid ENOMEM.

The effect of this bug is that reads from /proc and other virtual
filesystems can return ENOMEM instead of the preferred behavior - oom
killing something (possibly the calling process).  I don't know of anyone
except Google who has noticed the issue.

I suspect the fix is more needed in smaller systems where there isn't any
reclaimable memory.  But these seem like the kinds of systems which
probably don't use the oom killer for production situations.

Memory overcommit requires use of the oom killer to select a victim
regardless of file size.

Enable oom killer for small seq_buf_alloc() allocations.

Fixes: 5cec38ac86 ("fs, seq_file: fallback to vmalloc instead of oom kill processes")
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Thelen <gthelen@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Andy Shevchenko 25c6bb76ea seq_file: reuse string_escape_str()
strint_escape_str() escapes input string by given criteria.  In case of
seq_escape() the criteria is to convert some characters to their octal
representation.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Andy Shevchenko 8b91a318e4 fs/seq_file: use seq_* helpers in seq_hex_dump()
This improves code readability.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Oleg Nesterov d61ba58953 coredump: change zap_threads() and zap_process() to use for_each_thread()
Change zap_threads() paths to use for_each_thread() rather than
while_each_thread().

While at it, change zap_threads() to avoid the nested if's to make the
code more readable and lessen the indentation.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Kyle Walker <kwalker@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Stanislav Kozina <skozina@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Oleg Nesterov 5fa534c987 coredump: ensure all coredumping tasks have SIGNAL_GROUP_COREDUMP
task_will_free_mem() is wrong in many ways, and in particular the
SIGNAL_GROUP_COREDUMP check is not reliable: a task can participate in the
coredumping without SIGNAL_GROUP_COREDUMP bit set.

change zap_threads() paths to always set SIGNAL_GROUP_COREDUMP even if
other CLONE_VM processes can't react to SIGKILL.  Fortunately, at least
oom-kill case if fine; it kills all tasks sharing the same mm, so it
should also kill the process which actually dumps the core.

The change in prepare_signal() is not strictly necessary, it just ensures
that the patch does not bring another subtle behavioural change.  But it
reminds us that this SIGNAL_GROUP_EXIT/COREDUMP case needs more changes.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Kyle Walker <kwalker@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Stanislav Kozina <skozina@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Oleg Nesterov 9317bb9696 signal: remove jffs2_garbage_collect_thread()->allow_signal(SIGCONT)
jffs2_garbage_collect_thread() does allow_signal(SIGCONT) for no reason,
SIGCONT will wake a stopped task up even if it is ignored.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Oleg Nesterov 9a13049e83 signal: introduce kernel_signal_stop() to fix jffs2_garbage_collect_thread()
jffs2_garbage_collect_thread() can race with SIGCONT and sleep in
TASK_STOPPED state after it was already sent. Add the new helper,
kernel_signal_stop(), which does this correctly.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Oleg Nesterov be0e6f290f signal: turn dequeue_signal_lock() into kernel_dequeue_signal()
1. Rename dequeue_signal_lock() to kernel_dequeue_signal(). This
   matches another "for kthreads only" kernel_sigaction() helper.

2. Remove the "tsk" and "mask" arguments, they are always current
   and current->blocked. And it is simply wrong if tsk != current.

3. We could also remove the 3rd "siginfo_t *info" arg but it looks
   potentially useful. However we can simplify the callers if we
   change kernel_dequeue_signal() to accept info => NULL.

4. Remove _irqsave, it is never called from atomic context.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Ryusuke Konishi 4f05028f8d nilfs2: fix gcc uninitialized-variable warnings in powerpc build
Some false positive warnings are reported for powerpc build.

The following warnings are reported in
 http://kisskb.ellerman.id.au/kisskb/buildresult/12519703/

   CC      fs/nilfs2/super.o
 fs/nilfs2/super.c: In function 'nilfs_resize_fs':
 fs/nilfs2/super.c:376:2: warning: 'blocknr' may be used uninitialized in this function [-Wuninitialized]
 fs/nilfs2/super.c:362:11: note: 'blocknr' was declared here
   CC      fs/nilfs2/recovery.o
 fs/nilfs2/recovery.c: In function 'nilfs_salvage_orphan_logs':
 fs/nilfs2/recovery.c:631:21: warning: 'sum' may be used uninitialized in this function [-Wuninitialized]
 fs/nilfs2/recovery.c:585:32: note: 'sum' was declared here
 fs/nilfs2/recovery.c: In function 'nilfs_search_super_root':
 fs/nilfs2/recovery.c:873:11: warning: 'sum' may be used uninitialized in this function [-Wuninitialized]

Another similar warning is reported in
 http://kisskb.ellerman.id.au/kisskb/buildresult/12520079/

   CC      fs/nilfs2/btree.o
 fs/nilfs2/btree.c: In function 'nilfs_btree_convert_and_insert':
 include/asm-generic/bitops/non-atomic.h:105:20: warning: 'bh' may be used uninitialized in this function [-Wuninitialized]
 fs/nilfs2/btree.c:1859:22: note: 'bh' was declared here

This cleans out these warnings by forcing the variables to be initialized.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Ryusuke Konishi 09ef29e0f6 nilfs2: fix gcc unused-but-set-variable warnings
Fix the following build warnings:

 $ make W=1
 [...]
   CC [M]  fs/nilfs2/btree.o
 fs/nilfs2/btree.c: In function 'nilfs_btree_split':
 fs/nilfs2/btree.c:923:8: warning: variable 'newptr' set but not used [-Wunused-but-set-variable]
   __u64 newptr;
         ^
 fs/nilfs2/btree.c:922:8: warning: variable 'newkey' set but not used [-Wunused-but-set-variable]
   __u64 newkey;
         ^
   CC [M]  fs/nilfs2/dat.o
 fs/nilfs2/dat.c: In function 'nilfs_dat_prepare_end':
 fs/nilfs2/dat.c:158:8: warning: variable 'start' set but not used [-Wunused-but-set-variable]
   __u64 start;
         ^
   CC [M]  fs/nilfs2/segment.o
 fs/nilfs2/segment.c: In function 'nilfs_segctor_do_immediate_flush':
 fs/nilfs2/segment.c:2433:6: warning: variable 'err' set but not used [-Wunused-but-set-variable]
   int err;
       ^
   CC [M]  fs/nilfs2/sufile.o
 fs/nilfs2/sufile.c: In function 'nilfs_sufile_alloc':
 fs/nilfs2/sufile.c:320:27: warning: variable 'ncleansegs' set but not used [-Wunused-but-set-variable]
   unsigned long nsegments, ncleansegs, nsus, cnt;
                            ^
   CC [M]  fs/nilfs2/alloc.o
 fs/nilfs2/alloc.c: In function 'nilfs_palloc_prepare_alloc_entry':
 fs/nilfs2/alloc.c:478:38: warning: variable 'groups_per_desc_block' set but not used [-Wunused-but-set-variable]
   unsigned long n, entries_per_group, groups_per_desc_block;
                                       ^

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Hitoshi Mitake a9cd207c23 nilfs2: add tracepoints for analyzing reading and writing metadata files
This patch adds tracepoints for analyzing requests of reading and writing
metadata files.  The tracepoints cover every in-place mdt files (cpfile,
sufile, and datfile).

Example of tracing mdt_insert_new_block():
              cp-14635 [000] ...1 30598.199309: nilfs2_mdt_insert_new_block: inode = ffff88022a8d0178 ino = 3 block = 155
              cp-14635 [000] ...1 30598.199520: nilfs2_mdt_insert_new_block: inode = ffff88022a8d0178 ino = 3 block = 5
              cp-14635 [000] ...1 30598.200828: nilfs2_mdt_insert_new_block: inode = ffff88022a8d0178 ino = 3 block = 253

Signed-off-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: TK Kato <TK.Kato@wdc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Hitoshi Mitake 83eec5e6dd nilfs2: add tracepoints for analyzing sufile manipulation
This patch adds tracepoints which would be useful for analyzing segment
usage from a perspective of high level sufile manipulation (check, alloc,
free).  sufile is an important in-place updated metadata file, so
analyzing the behavior would be useful for performance turning.

example of usage (a case of allocation):

$ sudo bin/tpoint nilfs2:nilfs2_segment_usage_allocated
Tracing nilfs2:nilfs2_segment_usage_allocated. Ctrl-C to end.
        segctord-17800 [002] ...1 10671.867294: nilfs2_segment_usage_allocated: sufile = ffff880054f908a8 segnum = 2
        segctord-17800 [002] ...1 10675.073477: nilfs2_segment_usage_allocated: sufile = ffff880054f908a8 segnum = 3

Signed-off-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benixon Dhas <benixon.dhas@wdc.com>
Cc: TK Kato <TK.Kato@wdc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Hitoshi Mitake 44fda11460 nilfs2: add a tracepoint for transaction events
This patch adds a tracepoint for transaction events of nilfs.  With the
tracepoint, these events can be tracked: begin, abort, commit, trylock,
lock, and unlock.  Basically, these events have corresponding functions
e.g.  begin event corresponds nilfs_transaction_begin().  The unlock event
is an exception.  It corresponds to the iteration in
nilfs_transaction_lock().

Only one tracepoint is introcued: nilfs2_transaction_transition.  The
above events are distinguished with newly introduced enum.  With this
tracepoint, we can analyse a critical section of segment constructoin.

Sample output by tpoint of perf-tools:
              cp-4457  [000] ...1    63.266220: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800bf5ccc58 count = 1 flags = 9 state = BEGIN
              cp-4457  [000] ...1    63.266221: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800bf5ccc58 count = 0 flags = 9 state = COMMIT
              cp-4457  [000] ...1    63.266221: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800bf5ccc58 count = 0 flags = 9 state = COMMIT
        segctord-4371  [001] ...1    68.261196: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800b889bdf8 count = 0 flags = 10 state = TRYLOCK
        segctord-4371  [001] ...1    68.261280: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800b889bdf8 count = 0 flags = 10 state = LOCK
        segctord-4371  [001] ...1    68.261877: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800b889bdf8 count = 1 flags = 10 state = BEGIN
        segctord-4371  [001] ...1    68.262116: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800b889bdf8 count = 0 flags = 18 state = COMMIT
        segctord-4371  [001] ...1    68.265032: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800b889bdf8 count = 0 flags = 18 state = UNLOCK
        segctord-4371  [001] ...1   132.376847: nilfs2_transaction_transition: sb = ffff8802112b8800 ti = ffff8800b889bdf8 count = 0 flags = 10 state = TRYLOCK

This patch also does trivial cleaning of comma usage in collection stage
transition event for consistent coding style.

Signed-off-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Hitoshi Mitake 5849770383 nilfs2: add a tracepoint for tracking stage transition of segment construction
This patch adds a tracepoint for tracking stage transition of block
collection in segment construction.  With the tracepoint, we can analysis
the behavior of segment construction in depth.  It would be useful for
bottleneck detection and debugging, etc.

The tracepoint is created with the standard trace API of linux (like ext3,
ext4, f2fs and btrfs).  So we can analysis with existing tools easily.  Of
course, more detailed analysis will be possible if we can create nilfs
specific analysis tools.

Below is an example of event dump with Brendan Gregg's perf-tools
(https://github.com/brendangregg/perf-tools).  Time consumption between
each stage can be obtained.

$ sudo bin/tpoint nilfs2:nilfs2_collection_stage_transition
Tracing nilfs2:nilfs2_collection_stage_transition. Ctrl-C to end.
        segctord-14875 [003] ...1 28311.067794: nilfs2_collection_stage_transition: sci = ffff8800ce6de000 stage = ST_INIT
        segctord-14875 [003] ...1 28311.068139: nilfs2_collection_stage_transition: sci = ffff8800ce6de000 stage = ST_GC
        segctord-14875 [003] ...1 28311.068139: nilfs2_collection_stage_transition: sci = ffff8800ce6de000 stage = ST_FILE
        segctord-14875 [003] ...1 28311.068486: nilfs2_collection_stage_transition: sci = ffff8800ce6de000 stage = ST_IFILE
        segctord-14875 [003] ...1 28311.068540: nilfs2_collection_stage_transition: sci = ffff8800ce6de000 stage = ST_CPFILE
        segctord-14875 [003] ...1 28311.068561: nilfs2_collection_stage_transition: sci = ffff8800ce6de000 stage = ST_SUFILE
        segctord-14875 [003] ...1 28311.068565: nilfs2_collection_stage_transition: sci = ffff8800ce6de000 stage = ST_DAT
        segctord-14875 [003] ...1 28311.068573: nilfs2_collection_stage_transition: sci = ffff8800ce6de000 stage = ST_SR
        segctord-14875 [003] ...1 28311.068574: nilfs2_collection_stage_transition: sci = ffff8800ce6de000 stage = ST_DONE

For capturing transition correctly, this patch adds wrappers for the
member scnt of nilfs_cstage.  With this change, every transition of the
stage can produce trace event in a correct manner.

Signed-off-by: Hitoshi Mitake <mitake.hitoshi@lab.ntt.co.jp>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Ryusuke Konishi d0c14a9ee7 nilfs2: free unused dat file blocks during garbage collection
As a nilfs2 volume ages, the amount of available disk space decreases
little by little due to bloat of DAT (disk address translation) metadata
file.  Even if we delete all files in a file system and free their block
addresses from the DAT file through a garbage collection, empty DAT blocks
are not freed.

This fixes the issue by extending the deallocator of block addresses so
that empty data blocks and empty bitmap blocks of DAT are deleted.

The following comparison shows the effect of this patch.  Each shows disk
amount information of a nilfs2 volume that we cleaned out by deleting all
files and running gc after having filled 90% of its capacity.

Before:
Filesystem     1K-blocks     Used Available Use% Mounted on
/dev/sda1      500105212  3022844 472072192   1% /test

After:
Filesystem     1K-blocks     Used Available Use% Mounted on
/dev/sda1      500105212    16380 475078656   1% /test

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Ryusuke Konishi da019954dd nilfs2: add helper functions to delete blocks from dat file
This adds delete functions for data blocks of metadata files using bitmap
based allocator.  nilfs_palloc_delete_entry_block() deletes an entry block
(e.g.  block storing dat entries), and nilfs_palloc_delete_bitmap_block()
deletes a bitmap block, respectively.

These helpers are intended to be used in the successive change on
deallocator of block addresses ("nilfs2: free unused dat file blocks
during garbage collection").

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Ryusuke Konishi b22580948c nilfs2: get rid of nilfs_palloc_group_is_in()
This unfolds nilfs_palloc_group_is_in() helper function into
nilfs_palloc_freev() function to simplify a range check and an index
calculation repeatedy performed in a loop of the function.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Ryusuke Konishi 18c41b37f0 nilfs2: refactor nilfs_palloc_find_available_slot()
The current implementation of nilfs_palloc_find_available_slot() function
is overkill.  The underlying bit search routine is well optimized, so this
uses it more simply in nilfs_palloc_find_available_slot().

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Ryusuke Konishi 4e9e63a671 nilfs2: do not call nilfs_mdt_bgl_lock() needlessly
In the bitmap based allocator implementation, nilfs_mdt_bgl_lock() helper
is frequently used to get a spinlock protecting a target block group.
This reduces its usage and simplifies arguments of some related functions
by directly passing a pointer to the spinlock.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Ryusuke Konishi b7bed712d0 nilfs2: use nilfs_warning() in allocator implementation
This uses nilfs_warning() to replace "printk(KERN_WARNING ...);" in the
bitmap based allocator implementation of nilfs2.  The warning messages are
modified to include the device name and the inode number in each message.
This makes it clear which metadata file of which device has output
warnings such as "entry number xxxx already freed".

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Julia Lawall da80a39fc9 nilfs2: drop null test before destroy functions
Remove unneeded NULL test.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@ expression x; @@
-if (x != NULL)
  \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Andrew Morton eac44a5e07 fs/jffs2/wbuf.c: remove stray semicolon
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Oleg Nesterov 54708d2858 proc: actually make proc_fd_permission() thread-friendly
The commit 96d0df79f2 ("proc: make proc_fd_permission() thread-friendly")
fixed the access to /proc/self/fd from sub-threads, but introduced another
problem: a sub-thread can't access /proc/<tid>/fd/ or /proc/thread-self/fd
if generic_permission() fails.

Change proc_fd_permission() to check same_thread_group(pid_task(), current).

Fixes: 96d0df79f2 ("proc: make proc_fd_permission() thread-friendly")
Reported-by: "Jin, Yihua" <yihua.jin@intel.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Andy Shevchenko 3a49f3d2a1 fs/proc/array.c: set overflow flag in case of error
For now in task_name() we ignore the return code of string_escape_str()
call.  This is not good if buffer suddenly becomes not big enough.  Do the
proper error handling there.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Jan Kara 23d0127096 fs/sync.c: make sync_file_range(2) use WB_SYNC_NONE writeback
sync_file_range(2) is documented to issue writeback only for pages that
are not currently being written.  After all the system call has been
created for userspace to be able to issue background writeout and so
waiting for in-flight IO is undesirable there.  However commit
ee53a891f4 ("mm: do_sync_mapping_range integrity fix") switched
do_sync_mapping_range() and thus sync_file_range() to issue writeback in
WB_SYNC_ALL mode since do_sync_mapping_range() was used by other code
relying on WB_SYNC_ALL semantics.

These days do_sync_mapping_range() went away and we can switch
sync_file_range(2) back to issuing WB_SYNC_NONE writeback.  That should
help PostgreSQL avoid large latency spikes when flushing data in the
background.

Andres measured a 20% increase in transactions per second on an SSD disk.

Signed-off-by: Jan Kara <jack@suse.com>
Reported-by: Andres Freund <andres@anarazel.de>
Tested-By: Andres Freund <andres@anarazel.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Michal Hocko c62d25556b mm, fs: introduce mapping_gfp_constraint()
There are many places which use mapping_gfp_mask to restrict a more
generic gfp mask which would be used for allocations which are not
directly related to the page cache but they are performed in the same
context.

Let's introduce a helper function which makes the restriction explicit and
easier to track.  This patch doesn't introduce any functional changes.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Mel Gorman 71baba4b92 mm, page_alloc: rename __GFP_WAIT to __GFP_RECLAIM
__GFP_WAIT was used to signal that the caller was in atomic context and
could not sleep.  Now it is possible to distinguish between true atomic
context and callers that are not willing to sleep.  The latter should
clear __GFP_DIRECT_RECLAIM so kswapd will still wake.  As clearing
__GFP_WAIT behaves differently, there is a risk that people will clear the
wrong flags.  This patch renames __GFP_WAIT to __GFP_RECLAIM to clearly
indicate what it does -- setting it allows all reclaim activity, clearing
them prevents it.

[akpm@linux-foundation.org: fix build]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Mel Gorman d0164adc89 mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd
__GFP_WAIT has been used to identify atomic context in callers that hold
spinlocks or are in interrupts.  They are expected to be high priority and
have access one of two watermarks lower than "min" which can be referred
to as the "atomic reserve".  __GFP_HIGH users get access to the first
lower watermark and can be called the "high priority reserve".

Over time, callers had a requirement to not block when fallback options
were available.  Some have abused __GFP_WAIT leading to a situation where
an optimisitic allocation with a fallback option can access atomic
reserves.

This patch uses __GFP_ATOMIC to identify callers that are truely atomic,
cannot sleep and have no alternative.  High priority users continue to use
__GFP_HIGH.  __GFP_DIRECT_RECLAIM identifies callers that can sleep and
are willing to enter direct reclaim.  __GFP_KSWAPD_RECLAIM to identify
callers that want to wake kswapd for background reclaim.  __GFP_WAIT is
redefined as a caller that is willing to enter direct reclaim and wake
kswapd for background reclaim.

This patch then converts a number of sites

o __GFP_ATOMIC is used by callers that are high priority and have memory
  pools for those requests. GFP_ATOMIC uses this flag.

o Callers that have a limited mempool to guarantee forward progress clear
  __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall
  into this category where kswapd will still be woken but atomic reserves
  are not used as there is a one-entry mempool to guarantee progress.

o Callers that are checking if they are non-blocking should use the
  helper gfpflags_allow_blocking() where possible. This is because
  checking for __GFP_WAIT as was done historically now can trigger false
  positives. Some exceptions like dm-crypt.c exist where the code intent
  is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to
  flag manipulations.

o Callers that built their own GFP flags instead of starting with GFP_KERNEL
  and friends now also need to specify __GFP_KSWAPD_RECLAIM.

The first key hazard to watch out for is callers that removed __GFP_WAIT
and was depending on access to atomic reserves for inconspicuous reasons.
In some cases it may be appropriate for them to use __GFP_HIGH.

The second key hazard is callers that assembled their own combination of
GFP flags instead of starting with something like GFP_KERNEL.  They may
now wish to specify __GFP_KSWAPD_RECLAIM.  It's almost certainly harmless
if it's missed in most cases as other activity will wake kswapd.

Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Linus Torvalds 27eb427bdc Merge branch 'for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs updates from Chris Mason:
 "We have a lot of subvolume quota improvements in here, along with big
  piles of cleanups from Dave Sterba and Anand Jain and others.

  Josef pitched in a batch of allocator fixes based on production use
  here at FB.  We found that mount -o ssd_spread greatly improved our
  performance on hardware raid5/6, but it exposed some CPU bottlenecks
  in the allocator.  These patches make a huge difference"

* 'for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (100 commits)
  Btrfs: fix hole punching when using the no-holes feature
  Btrfs: find_free_extent: Do not erroneously skip LOOP_CACHING_WAIT state
  btrfs: Fix a data space underflow warning
  btrfs: qgroup: Fix a rebase bug which will cause qgroup double free
  btrfs: qgroup: Fix a race in delayed_ref which leads to abort trans
  btrfs: clear PF_NOFREEZE in cleaner_kthread()
  btrfs: qgroup: Don't copy extent buffer to do qgroup rescan
  btrfs: add balance filters limits, stripes and usage to supported mask
  btrfs: extend balance filter usage to take minimum and maximum
  btrfs: add balance filter for stripes
  btrfs: extend balance filter limit to take minimum and maximum
  btrfs: fix use after free iterating extrefs
  btrfs: check unsupported filters in balance arguments
  Btrfs: fix regression running delayed references when using qgroups
  Btrfs: fix regression when running delayed references
  Btrfs: don't do extra bitmap search in one bit case
  Btrfs: keep track of largest extent in bitmaps
  Btrfs: don't keep trying to build clusters if we are fragmented
  Btrfs: cut down on loops through the allocator
  Btrfs: don't continue setting up space cache when enospc
  ...
2015-11-06 17:17:13 -08:00
Linus Torvalds 7130098096 Add support for the CSUM_SEED feature which will allow future
userspace utilities to change the file system's UUID without rewriting
 all of the file system metadata.
 
 A number of miscellaneous fixes, the most significant of which are in
 the ext4 encryption support.  Anyone wishing to use the encryption
 feature should backport all of the ext4 crypto patches up to 4.4 to
 get fixes to a memory leak and file system corruption bug.
 
 There are also cleanups in ext4's feature test macros and in ext4's
 sysfs support code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABCAAGBQJWPMOAAAoJEPL5WVaVDYGjDYAH/jVIz+WpPkZn/J1Oepy1WPDm
 Azxv+tUvKffXQ7sRwGZEU7snLaeamKxtrvHUXKLT4PIQB6m6o4/kk8o71ovv5PRT
 FvuMz1j7qsqEk5ZFQnqI7xosao/RovjfkvL5g+WsAN//C+vxO35bg4fVvZmf73GQ
 vloe6igM/qxiUAuMX0jlXjUI1Zyo+H3bXOC6LjnUCOPwZMRcQ9zMtoYjkWryTzo1
 4udepGRSfcWeZkWXqt9KIe6slYRmq3BtXWJ0+Zvx6gKWrXVIisINLDHYAEVBXAf4
 6VUiDKL6wIytkwt3vGwYSY11wNQC5ky3qV/tJlPnpbYfUP0vEvT4UXljoaR/YQc=
 =m3Q9
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "Add support for the CSUM_SEED feature which will allow future
  userspace utilities to change the file system's UUID without rewriting
  all of the file system metadata.

  A number of miscellaneous fixes, the most significant of which are in
  the ext4 encryption support.  Anyone wishing to use the encryption
  feature should backport all of the ext4 crypto patches up to 4.4 to
  get fixes to a memory leak and file system corruption bug.

  There are also cleanups in ext4's feature test macros and in ext4's
  sysfs support code"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (26 commits)
  fs/ext4: remove unnecessary new_valid_dev check
  ext4: fix abs() usage in ext4_mb_check_group_pa
  ext4: do not allow journal_opts for fs w/o journal
  ext4: explicit mount options parsing cleanup
  ext4, jbd2: ensure entering into panic after recording an error in superblock
  [PATCH] fix calculation of meta_bg descriptor backups
  ext4: fix potential use after free in __ext4_journal_stop
  jbd2: fix checkpoint list cleanup
  ext4: fix xfstest generic/269 double revoked buffer bug with bigalloc
  ext4: make the bitmap read routines return real error codes
  jbd2: clean up feature test macros with predicate functions
  ext4: clean up feature test macros with predicate functions
  ext4: call out CRC and corruption errors with specific error codes
  ext4: store checksum seed in superblock
  ext4: reserve code points for the project quota feature
  ext4: promote ext4 over ext2 in the default probe order
  jbd2: gate checksum calculations on crc driver presence, not sb flags
  ext4: use private version of page_zero_new_buffers() for data=journal mode
  ext4 crypto: fix bugs in ext4_encrypted_zeroout()
  ext4 crypto: replace some BUG_ON()'s with error checks
  ...
2015-11-06 16:23:27 -08:00
Markus Elfring 54bcfdf19e UBIFS: Delete unnecessary checks before the function call "iput"
The iput() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-11-06 23:26:52 +01:00
Richard Weinberger aeeb14f763 UBIFS: Fix possible memory leak in ubifs_readdir()
If ubifs_tnc_next_ent() returns something else than -ENOENT
we leak file->private_data.

Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: David Gstir <david@sigma-star.at>
2015-11-06 23:26:49 +01:00
Yaowei Bai 86ba9ed928 fs/ubifs: remove unnecessary new_valid_dev check
As currently new_valid_dev always returns 1, so new_valid_dev check is not
needed, remove it.

Signed-off-by: Yaowei Bai <bywxiaobai@163.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2015-11-06 23:26:48 +01:00
Linus Torvalds 22402cd0af Most of the changes are clean ups and small fixes. Some of them have
stable tags to them. I searched through my INBOX just as the merge window
 opened and found lots of patches to pull. I ran them through all my tests
 and they were in linux-next for a few days.
 
 Features added this release:
 ----------------------------
 
  o Module globbing. You can now filter function tracing to several
    modules. # echo '*:mod:*snd*' > set_ftrace_filter (Dmitry Safonov)
 
  o Tracer specific options are now visible even when the tracer is not
    active. It was rather annoying that you can only see and modify tracer
    options after enabling the tracer. Now they are in the options/ directory
    even when the tracer is not active. Although they are still only visible
    when the tracer is active in the trace_options file.
 
  o Trace options are now per instance (although some of the tracer specific
    options are global)
 
  o New tracefs file: set_event_pid. If any pid is added to this file, then
    all events in the instance will filter out events that are not part of
    this pid. sched_switch and sched_wakeup events handle next and the wakee
    pids.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJWPLQ5AAoJEKKk/i67LK/8CTYIAI1u8DE5QCzv3J0p54jVpNVR
 J5FqEU3eXIzd6FS4JXD4nxCeMpUZAy21YnhlZpsnrbJJM5bc9bUsBCwiKKM+MuSZ
 ztmy2sgYKkO0h/KUdhNgYJrzis3/Ojquyx9iAqK5ST/Fr+nKYx81akFKjNK53iur
 RJRut45sSa8rv11LaL8sgJ6hAWQTc+YkybUdZ5xaMdJmZ6A61T7Y6VzTjbUexuvL
 hntCfTjYLtVd8dbfknAnf3B7n/VOO3IFF85wr7ciYR5oEVfPrF8tHmJBlhHExPpX
 kaXAiDDRY/UTg/5DQqnp4zmxJoR5BQ2l4pT5PwiLcnwhcphIDNYS8EYUmOYAWjU=
 =TjOE
 -----END PGP SIGNATURE-----

Merge tag 'trace-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracking updates from Steven Rostedt:
 "Most of the changes are clean ups and small fixes.  Some of them have
  stable tags to them.  I searched through my INBOX just as the merge
  window opened and found lots of patches to pull.  I ran them through
  all my tests and they were in linux-next for a few days.

  Features added this release:
  ----------------------------

   - Module globbing.  You can now filter function tracing to several
     modules.  # echo '*:mod:*snd*' > set_ftrace_filter (Dmitry Safonov)

   - Tracer specific options are now visible even when the tracer is not
     active.  It was rather annoying that you can only see and modify
     tracer options after enabling the tracer.  Now they are in the
     options/ directory even when the tracer is not active.  Although
     they are still only visible when the tracer is active in the
     trace_options file.

   - Trace options are now per instance (although some of the tracer
     specific options are global)

   - New tracefs file: set_event_pid.  If any pid is added to this file,
     then all events in the instance will filter out events that are not
     part of this pid.  sched_switch and sched_wakeup events handle next
     and the wakee pids"

* tag 'trace-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (68 commits)
  tracefs: Fix refcount imbalance in start_creating()
  tracing: Put back comma for empty fields in boot string parsing
  tracing: Apply tracer specific options from kernel command line.
  tracing: Add some documentation about set_event_pid
  ring_buffer: Remove unneeded smp_wmb() before wakeup of reader benchmark
  tracing: Allow dumping traces without tracking trace started cpus
  ring_buffer: Fix more races when terminating the producer in the benchmark
  ring_buffer: Do no not complete benchmark reader too early
  tracing: Remove redundant TP_ARGS redefining
  tracing: Rename max_stack_lock to stack_trace_max_lock
  tracing: Allow arch-specific stack tracer
  recordmcount: arm64: Replace the ignored mcount call into nop
  recordmcount: Fix endianness handling bug for nop_mcount
  tracepoints: Fix documentation of RCU lockdep checks
  tracing: ftrace_event_is_function() can return boolean
  tracing: is_legal_op() can return boolean
  ring-buffer: rb_event_is_commit() can return boolean
  ring-buffer: rb_per_cpu_empty() can return boolean
  ring_buffer: ring_buffer_empty{cpu}() can return boolean
  ring-buffer: rb_is_reader_page() can return boolean
  ...
2015-11-06 13:30:20 -08:00
Linus Torvalds 02f0d3f758 MTD updates for 4.4-rc1:
Core
 
   * WARN (in some cases) when a struct mtd_info is registered multiple times;
     in the past this was "supported", but it's still error prone for future
     development. There's only one ugly case of this left in the tree (that
     we're aware of) and the owners are aware of the problems there.
 
   * fix potential deadlock in the blkdev removal path
     NOTE: the (potential) deadlock was introduced in a for-stable patch. This
     one is also marked for -stable.
 
   * ioctl(BLKPG) compat_ioctl support; resolves issues with 32-bit user space
     vs. 64-bit kernel space
 
   * Set MTD parent device correctly throughout the tree, so the tree structure
     appears correctly in sysfs; many drivers were missing this (soft)
     requirement
 
   * Move device tree partitions (ofpart) into a dedicated 'partitions' subnode;
     this helps to disambiguate whether a node is a partition or some other
     auxiliary data
 
   * Improve error handling for partitioning failures
 
  NAND
 
   * General: Increase timeout period, for corner-case systems with
     less-than-accurate jiffies
 
   * Fix OF-based autoloading of several NAND drivers when built as modules
 
   * pxa3xx_nand:
     - Rework timing configuration to be more dynamic
     - Refactor PM support
 
   * brcmnand: prepare for NorthStar 2 support (ARM64, 16-bit NAND chips)
 
   * sunxi_nand: refactoring and a few bug fixes
 
   * vf610: new NAND driver
 
   * FSMC: add SW BCH support; support common NAND DT bindings
 
   * lpc32xx_slc: refactor and improve timing calculations logic
 
   * denali: support for rev 5.1
 
  SPI NOR
 
   * Layering improvements
 
   * Added Winbond lock/unlock support
 
   * Added mtd_is_locked() (i.e., ioctl(MEMISLOCKED)) support
 
   * Increase full-chip-erase timeout linearly with flash size
 
   * fsl-quadspi: fix compile for non-ARM architectures
 
   * New flash support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWPPj0AAoJEFySrpd9RFgtJEgP/RnfXRHBX51cUl4r8XrxiGtz
 zlH5zFOCYWEOtlGjoD25wp+A5RRjWi62At6KmLJZncf0clJ65fyKHjt/JEg6YuI6
 DUTMepTwyC2Wh7Ux1ZEH3KOnl64xh5p+Wf7Tl4yUr0DCd26VEwE9o7tPRlahv9nx
 OhGCWS+uSsxW0Q2wDLCypFzXsnDBeoGxDO7VCIzle4d3aJ4PCcQIXINlr6ZYpocT
 VTTadPCMsmYq6AgV5W3KYGYLj62ITiN2YxdJRacg+QkKLfl21u2wVy9Ahk/oj5TG
 bV0DHiz6ky1F2K/bvJibcRFABiYup9UXIo1IzwLloSxEJ/GfennMC29xn9K/0gid
 e2kO/Ajh/bihgJXzoAoZD/40YJK40X5VW9rQZgo482sMBGLmJOzZiOHOIEXaVohs
 djQ7sbCwPmLwqp7C+6WTn8frp6ntIe9iXdmjDuR/WlPP0Sh5rI3cUeBQrJXEYxwc
 aYt1Zxkst6gEMPQJ/S2TiKwWm0BxVWEUEjKmt9FPWOaQnwmoeju0Y/6jIvs1TQKM
 vO8cmS17QyPUWT2kGIDmZ51KayY26uDC8/NA2t1HDYCiFbpDp61kgu2wyoBUTg7q
 YIAvjtnwOaG9qk0SLfZu4FEgNi4a/bC1bxGxChsi+S2krpNQAeMlPY394cf6OdsE
 j+CV/Ko0DguO26bO0MWr
 =UzSW
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20151106' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "Core:

   - WARN (in some cases) when a struct mtd_info is registered multiple
     times; in the past this was "supported", but it's still error prone
     for future development.  There's only one ugly case of this left in
     the tree (that we're aware of) and the owners are aware of the
     problems there.

   - fix potential deadlock in the blkdev removal path NOTE: the
     (potential) deadlock was introduced in a for-stable patch.  This
     one is also marked for -stable.

   - ioctl(BLKPG) compat_ioctl support; resolves issues with 32-bit user
     space vs 64-bit kernel space

   - Set MTD parent device correctly throughout the tree, so the tree
     structure appears correctly in sysfs; many drivers were missing
     this (soft) requirement

   - Move device tree partitions (ofpart) into a dedicated 'partitions'
     subnode; this helps to disambiguate whether a node is a partition
     or some other auxiliary data

   - Improve error handling for partitioning failures

  NAND:

   - General: Increase timeout period, for corner-case systems with
     less-than-accurate jiffies

   - Fix OF-based autoloading of several NAND drivers when built as
     modules

   - pxa3xx_nand:
      - Rework timing configuration to be more dynamic
      - Refactor PM support

   - brcmnand: prepare for NorthStar 2 support (ARM64, 16-bit NAND
     chips)

   - sunxi_nand: refactoring and a few bug fixes

   - vf610: new NAND driver

   - FSMC: add SW BCH support; support common NAND DT bindings

   - lpc32xx_slc: refactor and improve timing calculations logic

   - denali: support for rev 5.1

  SPI NOR:

   - Layering improvements

   - Added Winbond lock/unlock support

   - Added mtd_is_locked() (i.e., ioctl(MEMISLOCKED)) support

   - Increase full-chip-erase timeout linearly with flash size

   - fsl-quadspi: fix compile for non-ARM architectures

   - New flash support"

* tag 'for-linus-20151106' of git://git.infradead.org/linux-mtd: (169 commits)
  mtd: don't WARN about overloaded users of mtd->reboot_notifier.notifier_call
  mtd: nand: sunxi: avoid retrieving data before ECC pass
  mtd: nand: sunxi: fix sunxi_nfc_hw_ecc_read/write_chunk()
  mtd: blkdevs: fix potential deadlock + lockdep warnings
  mtd: ofpart: move ofpart partitions to a dedicated dt node
  doc: dt: mtd: support partitions in a special 'partitions' subnode
  mtd: brcmnand: Force 8bit mode before doing nand_scan_ident()
  mtd: brcmnand: factor out CFG and CFG_EXT bitfields
  mtd: mtdpart: Do not fail mtd probe when parsing partitions fails
  mtd: fsl-quadspi: fix macro collision problems with READ/WRITE
  mtd: warn when registering the same master many times
  mtd: fixup corner case error handling in mtd_device_parse_register()
  mtd: tests: Replace timeval with ktime_t
  mtd: fsmc_nand: Add BCH4 SW ECC support for SPEAr600
  mtd: nand: vf610_nfc: use nand_check_erased_ecc_chunk() helper
  mtd: nand: increase ready wait timeout and report timeouts
  mtd: docg3: off by one in doc_register_sysfs()
  mtd: pxa3xx_nand: clean up the pxa3xx timings
  mtd: pxa3xx_nand: rework flash detection and timing setup
  mtd: pxa3xx_nand: add helpers to setup the timings
  ...
2015-11-06 11:50:24 -08:00
Linus Torvalds 2e3078af2c Merge branch 'akpm' (patches from Andrew)
Merge patch-bomb from Andrew Morton:

 - inotify tweaks

 - some ocfs2 updates (many more are awaiting review)

 - various misc bits

 - kernel/watchdog.c updates

 - Some of mm.  I have a huge number of MM patches this time and quite a
   lot of it is quite difficult and much will be held over to next time.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (162 commits)
  selftests: vm: add tests for lock on fault
  mm: mlock: add mlock flags to enable VM_LOCKONFAULT usage
  mm: introduce VM_LOCKONFAULT
  mm: mlock: add new mlock system call
  mm: mlock: refactor mlock, munlock, and munlockall code
  kasan: always taint kernel on report
  mm, slub, kasan: enable user tracking by default with KASAN=y
  kasan: use IS_ALIGNED in memory_is_poisoned_8()
  kasan: Fix a type conversion error
  lib: test_kasan: add some testcases
  kasan: update reference to kasan prototype repo
  kasan: move KASAN_SANITIZE in arch/x86/boot/Makefile
  kasan: various fixes in documentation
  kasan: update log messages
  kasan: accurately determine the type of the bad access
  kasan: update reported bug types for kernel memory accesses
  kasan: update reported bug types for not user nor kernel memory accesses
  mm/kasan: prevent deadlock in kasan reporting
  mm/kasan: don't use kasan shadow pointer in generic functions
  mm/kasan: MODULE_VADDR is not available on all archs
  ...
2015-11-05 23:10:54 -08:00
Eric Biggers ea5c58e70c vfs: clear remainder of 'full_fds_bits' in dup_fd()
This fixes a bug from commit f3f86e33dc ("vfs: Fix pathological
performance case for __alloc_fd()").

v2: refactor to share fd bitmap copying code
Signed-off-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 23:05:32 -08:00
David Rientjes b72bdfa736 mm, oom: add comment for why oom_adj exists
/proc/pid/oom_adj exists solely to avoid breaking existing userspace
binaries that write to the tunable.

Add a comment in the only possible location within the kernel tree to
describe the situation and motivation for keeping it around.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 19:34:48 -08:00
Laurent Dufour 5d3875a01e mm: clear_soft_dirty_pmd() requires THP
Don't build clear_soft_dirty_pmd() if transparent huge pages are not
enabled.

Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 19:34:48 -08:00
Laurent Dufour 326c2597a3 mm: clear pte in clear_soft_dirty()
As mentioned in the commit 56eecdb912 ("mm: Use ptep/pmdp_set_numa()
for updating _PAGE_NUMA bit"), architectures like ppc64 don't do tlb
flush in set_pte/pmd functions.

So when dealing with existing pte in clear_soft_dirty, the pte must be
cleared before being modified.

Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 19:34:48 -08:00
Junichi Nomura aa750fd71c mm/filemap.c: make global sync not clear error status of individual inodes
filemap_fdatawait() is a function to wait for on-going writeback to
complete but also consume and clear error status of the mapping set during
writeback.

The latter functionality is critical for applications to detect writeback
error with system calls like fsync(2)/fdatasync(2).

However filemap_fdatawait() is also used by sync(2) or FIFREEZE ioctl,
which don't check error status of individual mappings.

As a result, fsync() may not be able to detect writeback error if events
happen in the following order:

   Application                    System admin
   ----------------------------------------------------------
   write data on page cache
                                  Run sync command
                                  writeback completes with error
                                  filemap_fdatawait() clears error
   fsync returns success
   (but the data is not on disk)

This patch adds filemap_fdatawait_keep_errors() for call sites where
writeback error is not handled so that they don't clear error status.

Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Tejun Heo <tj@kernel.org>
Cc: Fengguang Wu <fengguang.wu@gmail.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 19:34:48 -08:00
Naoya Horiguchi 5d317b2b65 mm: hugetlb: proc: add HugetlbPages field to /proc/PID/status
Currently there's no easy way to get per-process usage of hugetlb pages,
which is inconvenient because userspace applications which use hugetlb
typically want to control their processes on the basis of how much memory
(including hugetlb) they use.  So this patch simply provides easy access
to the info via /proc/PID/status.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Joern Engel <joern@logfs.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 19:34:48 -08:00
Naoya Horiguchi 25ee01a2fc mm: hugetlb: proc: add hugetlb-related fields to /proc/PID/smaps
Currently /proc/PID/smaps provides no usage info for vma(VM_HUGETLB),
which is inconvenient when we want to know per-task or per-vma base
hugetlb usage.  To solve this, this patch adds new fields for hugetlb
usage like below:

  Size:              20480 kB
  Rss:                   0 kB
  Pss:                   0 kB
  Shared_Clean:          0 kB
  Shared_Dirty:          0 kB
  Private_Clean:         0 kB
  Private_Dirty:         0 kB
  Referenced:            0 kB
  Anonymous:             0 kB
  AnonHugePages:         0 kB
  Shared_Hugetlb:    18432 kB
  Private_Hugetlb:    2048 kB
  Swap:                  0 kB
  KernelPageSize:     2048 kB
  MMUPageSize:        2048 kB
  Locked:                0 kB
  VmFlags: rd wr mr mw me de ht

[hughd@google.com: fix Private_Hugetlb alignment ]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Joern Engel <joern@logfs.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 19:34:48 -08:00
Dominique Martinet b64787401f 9p: do not overwrite return code when locking fails
If the remote locking fail, we run a local vfs unlock that should work and
return success to userland when we didn't actually lock at all.  We need
to tell the application that tried to lock that it didn't get it, not that
all went well.

Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 19:34:48 -08:00
Joseph Qi 262d8a8779 ocfs2: clean up unused variable in ocfs2_duplicate_clusters_by_page()
readahead_pages in ocfs2_duplicate_clusters_by_page is defined but not
used, so clean it up.

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 19:34:48 -08:00
Joseph Qi 5afc44e2e9 ocfs2: add uuid to ocfs2 thread name for problem analysis
A node can mount multiple ocfs2 volumes.  And if thread names are same for
each volume/domain, it will bring inconvenience when analyzing problems
because we have to identify which volume/domain the messages belong to.

Since thread name will be printed to messages, so add volume uuid or dlm
name to thread name can benefit problem analysis.

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Gang He <ghe@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 19:34:48 -08:00
alex chen b1529a41f7 ocfs2: should reclaim the inode if '__ocfs2_mknod_locked' returns an error
In ocfs2_mknod_locked if '__ocfs2_mknod_locke		d' returns an error, we
should reclaim the inode successfully claimed above, otherwise, the
inode never be reused. The case is described below:

ocfs2_mknod
    ocfs2_mknod_locked
        ocfs2_claim_new_inode
                Successfully claim the inode
        __ocfs2_mknod_locked
            ocfs2_journal_access_di
            Failed because of -ENOMEM or other reasons, the inode
                        lockres has not been initialized yet.

    iput(inode)
        ocfs2_evict_inode
            ocfs2_delete_inode
                ocfs2_inode_lock
                    ocfs2_inode_lock_full_nested
                        __ocfs2_cluster_lock
                                Return -EINVAL because of the inode
                                lockres has not been initialized.

                So the following operations are not performed
                ocfs2_wipe_inode
                        ocfs2_remove_inode
                                ocfs2_free_dinode
                                        ocfs2_free_suballoc_bits

Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 19:34:48 -08:00
Joseph Qi 0986fe9b50 ocfs2: fix race between mount and delete node/cluster
There is a race case between mount and delete node/cluster, which will
lead o2hb_thread to malfunctioning dead loop.

    o2hb_thread
    {
        o2nm_depend_this_node();
        <<<<<< race window, node may have already been deleted, and then
               enter the loop, o2hb thread will be malfunctioning
               because of no configured nodes found.
        while (!kthread_should_stop() &&
               !reg->hr_unclean_stop && !reg->hr_aborted_start) {
    }

So check the return value of o2nm_depend_this_node() is needed.  If node
has been deleted, do not enter the loop and let mount fail.

Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-05 19:34:48 -08:00