setup_earlycon() will now match and register the desired earlycon
from the param string (as if 'earlycon=...' had been set on the
command line). Use setup_earlycon() from existing arch call sites
which start an earlycon directly.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no reason to pass static vars to function that can use
only them.
The dmi_table() can use only dmi_len and dmi_num static vars, so use
them directly. In this case we can freely change their type in one
place and slightly decrease redundancy.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
New SMBIOS3 spec adds additional field for versioning - docrev.
The docrev identifies the revision of a specification implemented in
the table structures, so display SMBIOSv3 versions in format,
like "3.22.1".
In case of only 32 bit entry point for versions > 3 display
dmi version like "3.22.x" as we don't know the docrev.
In other cases display version like it was.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Support powering down the calling cpu, by trapping into SCM. This
termination function triggers the ARM cpu to execute WFI instruction,
causing the power controller to safely power the cpu down.
Caches may be flushed before powering down the cpu. If cache controller
is set to turn off when the cpu is powered down, then the flags argument
indicates to the secure mode to flush its cache lines before executing
WFI.The warm boot reset address for the cpu should be set before the
calling into this function for the cpu to resume.
The original code for the qcom_scm_call_atomic1() comes from a patch by
Stephen Boyd [1]. The function scm_call_atomic1() has been cherry picked
and renamed to match the convention used in this file. Since there are
no users of scm_call_atomic2(), the function is not included.
[1]. https://lkml.org/lkml/2014/8/4/765
Signed-off-by: Stephen Boyd <sboyd@codeauraro.org>
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
A core can be powered down for cpuidle or when it is hotplugged off. In
either case, the warmboot return address would be different. Allow
setting the warmboot address for a specific cpu, optimize and write to
the firmware, if the address is different than the previously set
address.
Export qcom_scm_set_warm_boot_addr function move the warm boot flags to
implementation.
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
We dont need to export the SCM specific cold boot flags to the platform
code. Export only a function to set the cold boot address.
Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Architectural changes in the ARM Linux kernel tree mandate the eventual
removal of the mach-* directories. Move the scm driver to
drivers/firmware and the scm header to include/linux to support that
removal.
Signed-off-by: Kumar Gala <galak@codeaurora.org>
and a type bug that could lead to integer overflow - Ivan Khoronzhuk
* Fix boundary checking in efi_high_alloc() which can lead to memory
corruption in the EFI boot stubs - Yinghai Lu
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=GJnM
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent
Pull EFI fixes from Matt Fleming:
" - Fix regression in DMI sysfs code for handling "End of Table" entry
and a type bug that could lead to integer overflow. (Ivan Khoronzhuk)
- Fix boundary checking in efi_high_alloc() which can lead to memory
corruption in the EFI boot stubs. (Yinghai Lu)"
Signed-off-by: Ingo Molnar <mingo@kernel.org>
According to SMBIOSv3 specification the length of DMI table can be
up to 32bits wide. So use appropriate type to avoid overflow.
It's obvious that dmi_num theoretically can be more than u16 also,
so it's can be changed to u32 or at least it's better to use int
instead of u16, but on that moment I cannot imagine dmi structure
count more than 65535 and it can require changing type of vars that
work with it. So I didn't correct it.
Acked-by: Ard Biesheuvel <ard@linaro.org>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
While adding support loading kernel and initrd above 4G to grub2 in legacy
mode, I was referring to efi_high_alloc().
That will allocate buffer for kernel and then initrd, and initrd will
use kernel buffer start as limit.
During testing found two buffers will be overlapped when initrd size is
very big like 400M.
It turns out efi_high_alloc() boundary checking is not right.
end - size will be the new start, and should not compare new
start with max, we need to make sure end is smaller than max.
[ Basically, with the current efi_high_alloc() code it's possible to
allocate memory above 'max', because efi_high_alloc() doesn't check
that the tail of the allocation is below 'max'.
If you have an EFI memory map with a single entry that looks like so,
[0xc0000000-0xc0004000]
And want to allocate 0x3000 bytes below 0xc0003000 the current code
will allocate [0xc0001000-0xc0004000], not [0xc0000000-0xc0003000]
like you would expect. - Matt ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Pull misc x86 fixes from Ingo Molnar:
"This contains:
- EFI fixes
- a boot printout fix
- ASLR/kASLR fixes
- intel microcode driver fixes
- other misc fixes
Most of the linecount comes from an EFI revert"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/ASLR: Avoid PAGE_SIZE redefinition for UML subarch
x86/microcode/intel: Handle truncated microcode images more robustly
x86/microcode/intel: Guard against stack overflow in the loader
x86, mm/ASLR: Fix stack randomization on 64-bit systems
x86/mm/init: Fix incorrect page size in init_memory_mapping() printks
x86/mm/ASLR: Propagate base load address calculation
Documentation/x86: Fix path in zero-page.txt
x86/apic: Fix the devicetree build in certain configs
Revert "efi/libstub: Call get_memory_map() to obtain map and desc sizes"
x86/efi: Avoid triple faults during EFI mixed mode calls
The dmi-sysfs should create "End of Table" entry, that is type 127. But
after adding initial SMBIOS v3 support fc43026278 ("dmi: add support
for SMBIOS 3.0 64-bit entry point") the 127-0 entry is not handled any
more, as result it's not created in dmi sysfs for instance. This is
important because the size of whole DMI table must correspond to sum of
all DMI entry sizes.
So move the end-of-table check after it's handled by dmi_table.
Reviewed-by: Ard Biesheuvel <ard@linaro.org>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Cc: <stable@vger.kernel.org> # v3.19
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
This reverts commit d1a8d66b91.
Ard reported a boot failure when running UEFI under Qemu and Xen and
experimenting with various Tianocore build options,
"As it turns out, when allocating room for the UEFI memory map using
UEFI's AllocatePool (), it may result in two new memory map entries
being created, for instance, when using Tianocore's preallocated region
feature. For example, the following region
0x00005ead5000-0x00005ebfffff [Conventional Memory| | | | | |WB|WT|WC|UC]
may be split like this
0x00005ead5000-0x00005eae2fff [Conventional Memory| | | | | |WB|WT|WC|UC]
0x00005eae3000-0x00005eae4fff [Loader Data | | | | | |WB|WT|WC|UC]
0x00005eae5000-0x00005ebfffff [Conventional Memory| | | | | |WB|WT|WC|UC]
if the preallocated Loader Data region was chosen to be right in the
middle of the original free space.
After patch d1a8d66b91 ("efi/libstub: Call get_memory_map() to
obtain map and desc sizes"), this is not being dealt with correctly
anymore, as the existing logic to allocate room for a single additional
entry has become insufficient."
Mark requested to reinstate the old loop we had before commit
d1a8d66b91, which grows the memory map buffer until it's big enough to
hold the EFI memory map.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Recently instrumentation of builtin functions calls was removed from GCC
5.0. To check the memory accessed by such functions, userspace asan
always uses interceptors for them.
So now we should do this as well. This patch declares
memset/memmove/memcpy as weak symbols. In mm/kasan/kasan.c we have our
own implementation of those functions which checks memory before accessing
it.
Default memset/memmove/memcpy now now always have aliases with '__'
prefix. For files that built without kasan instrumentation (e.g.
mm/slub.c) original mem* replaced (via #define) with prefixed variants,
cause we don't want to check memory accesses there.
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kernel Address sanitizer (KASan) is a dynamic memory error detector. It
provides fast and comprehensive solution for finding use-after-free and
out-of-bounds bugs.
KASAN uses compile-time instrumentation for checking every memory access,
therefore GCC > v4.9.2 required. v4.9.2 almost works, but has issues with
putting symbol aliases into the wrong section, which breaks kasan
instrumentation of globals.
This patch only adds infrastructure for kernel address sanitizer. It's
not available for use yet. The idea and some code was borrowed from [1].
Basic idea:
The main idea of KASAN is to use shadow memory to record whether each byte
of memory is safe to access or not, and use compiler's instrumentation to
check the shadow memory on each memory access.
Address sanitizer uses 1/8 of the memory addressable in kernel for shadow
memory and uses direct mapping with a scale and offset to translate a
memory address to its corresponding shadow address.
Here is function to translate address to corresponding shadow address:
unsigned long kasan_mem_to_shadow(unsigned long addr)
{
return (addr >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET;
}
where KASAN_SHADOW_SCALE_SHIFT = 3.
So for every 8 bytes there is one corresponding byte of shadow memory.
The following encoding used for each shadow byte: 0 means that all 8 bytes
of the corresponding memory region are valid for access; k (1 <= k <= 7)
means that the first k bytes are valid for access, and other (8 - k) bytes
are not; Any negative value indicates that the entire 8-bytes are
inaccessible. Different negative values used to distinguish between
different kinds of inaccessible memory (redzones, freed memory) (see
mm/kasan/kasan.h).
To be able to detect accesses to bad memory we need a special compiler.
Such compiler inserts a specific function calls (__asan_load*(addr),
__asan_store*(addr)) before each memory access of size 1, 2, 4, 8 or 16.
These functions check whether memory region is valid to access or not by
checking corresponding shadow memory. If access is not valid an error
printed.
Historical background of the address sanitizer from Dmitry Vyukov:
"We've developed the set of tools, AddressSanitizer (Asan),
ThreadSanitizer and MemorySanitizer, for user space. We actively use
them for testing inside of Google (continuous testing, fuzzing,
running prod services). To date the tools have found more than 10'000
scary bugs in Chromium, Google internal codebase and various
open-source projects (Firefox, OpenSSL, gcc, clang, ffmpeg, MySQL and
lots of others): [2] [3] [4].
The tools are part of both gcc and clang compilers.
We have not yet done massive testing under the Kernel AddressSanitizer
(it's kind of chicken and egg problem, you need it to be upstream to
start applying it extensively). To date it has found about 50 bugs.
Bugs that we've found in upstream kernel are listed in [5].
We've also found ~20 bugs in out internal version of the kernel. Also
people from Samsung and Oracle have found some.
[...]
As others noted, the main feature of AddressSanitizer is its
performance due to inline compiler instrumentation and simple linear
shadow memory. User-space Asan has ~2x slowdown on computational
programs and ~2x memory consumption increase. Taking into account that
kernel usually consumes only small fraction of CPU and memory when
running real user-space programs, I would expect that kernel Asan will
have ~10-30% slowdown and similar memory consumption increase (when we
finish all tuning).
I agree that Asan can well replace kmemcheck. We have plans to start
working on Kernel MemorySanitizer that finds uses of unitialized
memory. Asan+Msan will provide feature-parity with kmemcheck. As
others noted, Asan will unlikely replace debug slab and pagealloc that
can be enabled at runtime. Asan uses compiler instrumentation, so even
if it is disabled, it still incurs visible overheads.
Asan technology is easily portable to other architectures. Compiler
instrumentation is fully portable. Runtime has some arch-dependent
parts like shadow mapping and atomic operation interception. They are
relatively easy to port."
Comparison with other debugging features:
========================================
KMEMCHECK:
- KASan can do almost everything that kmemcheck can. KASan uses
compile-time instrumentation, which makes it significantly faster than
kmemcheck. The only advantage of kmemcheck over KASan is detection of
uninitialized memory reads.
Some brief performance testing showed that kasan could be
x500-x600 times faster than kmemcheck:
$ netperf -l 30
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to localhost (127.0.0.1) port 0 AF_INET
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
no debug: 87380 16384 16384 30.00 41624.72
kasan inline: 87380 16384 16384 30.00 12870.54
kasan outline: 87380 16384 16384 30.00 10586.39
kmemcheck: 87380 16384 16384 30.03 20.23
- Also kmemcheck couldn't work on several CPUs. It always sets
number of CPUs to 1. KASan doesn't have such limitation.
DEBUG_PAGEALLOC:
- KASan is slower than DEBUG_PAGEALLOC, but KASan works on sub-page
granularity level, so it able to find more bugs.
SLUB_DEBUG (poisoning, redzones):
- SLUB_DEBUG has lower overhead than KASan.
- SLUB_DEBUG in most cases are not able to detect bad reads,
KASan able to detect both reads and writes.
- In some cases (e.g. redzone overwritten) SLUB_DEBUG detect
bugs only on allocation/freeing of object. KASan catch
bugs right before it will happen, so we always know exact
place of first bad read/write.
[1] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel
[2] https://code.google.com/p/address-sanitizer/wiki/FoundBugs
[3] https://code.google.com/p/thread-sanitizer/wiki/FoundBugs
[4] https://code.google.com/p/memory-sanitizer/wiki/FoundBugs
[5] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel#Trophies
Based on work by Andrey Konovalov.
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Acked-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- reimplementation of the virtual remapping of UEFI Runtime Services in
a way that is stable across kexec
- emulation of the "setend" instruction for 32-bit tasks (user
endianness switching trapped in the kernel, SCTLR_EL1.E0E bit set
accordingly)
- compat_sys_call_table implemented in C (from asm) and made it a
constant array together with sys_call_table
- export CPU cache information via /sys (like other architectures)
- DMA API implementation clean-up in preparation for IOMMU support
- macros clean-up for KVM
- dropped some unnecessary cache+tlb maintenance
- CONFIG_ARM64_CPU_SUSPEND clean-up
- defconfig update (CPU_IDLE)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJU25v3AAoJEGvWsS0AyF7xYjcP/j8ESvs+z0BPgeJ6XREfOnCh
cp+w/1rJ5BafJ5RRkibrciwTNOIJS4FGMivWyURtoh430lS0Rh7fxZ3Ouna3xjrT
Nf7AxenWoA8Lo6wHh+FlNUeGk3iWfX6WwA2tYrbKudK+LBJ1wHjwpE7cWQO0FgwJ
aFDahu+QD5/u45p/VcVctMtiEDvOxBdO8gfat6r+YkLm7pbRxQkZnpA/JE4Gps1p
Td5jvMNH9pXI5pffSbeR9Q+vs/r0yqKLXQg01Eb2bZgGDgwf9yzADrHuaKamZt35
X5flmLiTGC6swJCJvUkZC1Nuue33bXcvW5+vgvar+MNGyXsxv+B/wARLqGhiWhQZ
nLGwFpuNu6wdY9tGHb/XR8khcewkw1/lRH1hHKhchrmRyUqHvXcPgC5tamjLrY8C
BV3BAeQvRho8OKwWUmbXIlyON1vPux6CJdj4D/A5NL+qph2WHeVWJCXg6nVFx0Wc
Eb3bXbI4QRwTFL7pGRF8RyZJBAQtgYhQMKWMW2GHgUgn+r1EixG73BZoSwvpHrrw
FOR9AVNfVBqmNON8xiIb3DN4EViq76EF0jrsZh5I9EoWS2w5qtk60kJQgXE+M4EE
vOlmh3dhEVfCN2SxOn0bgoQmTulyjqGauTSSJKQbIBuinPFveukrJfGNFIWt0SZs
f38FBMo6sgU4VG85B+Fr
=X5x/
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"arm64 updates for 3.20:
- reimplementation of the virtual remapping of UEFI Runtime Services
in a way that is stable across kexec
- emulation of the "setend" instruction for 32-bit tasks (user
endianness switching trapped in the kernel, SCTLR_EL1.E0E bit set
accordingly)
- compat_sys_call_table implemented in C (from asm) and made it a
constant array together with sys_call_table
- export CPU cache information via /sys (like other architectures)
- DMA API implementation clean-up in preparation for IOMMU support
- macros clean-up for KVM
- dropped some unnecessary cache+tlb maintenance
- CONFIG_ARM64_CPU_SUSPEND clean-up
- defconfig update (CPU_IDLE)
The EFI changes going via the arm64 tree have been acked by Matt
Fleming. There is also a patch adding sys_*stat64 prototypes to
include/linux/syscalls.h, acked by Andrew Morton"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (47 commits)
arm64: compat: Remove incorrect comment in compat_siginfo
arm64: Fix section mismatch on alloc_init_p[mu]d()
arm64: Avoid breakage caused by .altmacro in fpsimd save/restore macros
arm64: mm: use *_sect to check for section maps
arm64: drop unnecessary cache+tlb maintenance
arm64:mm: free the useless initial page table
arm64: Enable CPU_IDLE in defconfig
arm64: kernel: remove ARM64_CPU_SUSPEND config option
arm64: make sys_call_table const
arm64: Remove asm/syscalls.h
arm64: Implement the compat_sys_call_table in C
syscalls: Declare sys_*stat64 prototypes if __ARCH_WANT_(COMPAT_)STAT64
compat: Declare compat_sys_sigpending and compat_sys_sigprocmask prototypes
arm64: uapi: expose our struct ucontext to the uapi headers
smp, ARM64: Kill SMP single function call interrupt
arm64: Emulate SETEND for AArch32 tasks
arm64: Consolidate hotplug notifier for instruction emulation
arm64: Track system support for mixed endian EL0
arm64: implement generic IOMMU configuration
arm64: Combine coherent and non-coherent swiotlb dma_ops
...
since that's a more logical and accurate place - Leif Lindholm
* Update efibootmgr URL in Kconfig help - Peter Jones
* Improve accuracy of EFI guid function names - Borislav Petkov
* Expose firmware platform size in sysfs for the benefit of EFI boot
loader installers and other utilities - Steve McIntyre
* Cleanup __init annotations for arm64/efi code - Ard Biesheuvel
* Mark the UIE as unsupported for rtc-efi - Ard Biesheuvel
* Fix memory leak in error code path of runtime map code - Dan Carpenter
* Improve robustness of get_memory_map() by removing assumptions on the
size of efi_memory_desc_t (which could change in future spec
versions) and querying the firmware instead of guessing about the
memmap size - Ard Biesheuvel
* Remove superfluous guid unparse calls - Ivan Khoronzhuk
* Delete unnecessary chosen@0 DT node FDT code since was duplicated
from code in drivers/of and is entirely unnecessary - Leif Lindholm
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=iPpM
-----END PGP SIGNATURE-----
Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/efi
Pull EFI updates from Matt Fleming:
" - Move efivarfs from the misc filesystem section to pseudo filesystem,
since that's a more logical and accurate place - Leif Lindholm
- Update efibootmgr URL in Kconfig help - Peter Jones
- Improve accuracy of EFI guid function names - Borislav Petkov
- Expose firmware platform size in sysfs for the benefit of EFI boot
loader installers and other utilities - Steve McIntyre
- Cleanup __init annotations for arm64/efi code - Ard Biesheuvel
- Mark the UIE as unsupported for rtc-efi - Ard Biesheuvel
- Fix memory leak in error code path of runtime map code - Dan Carpenter
- Improve robustness of get_memory_map() by removing assumptions on the
size of efi_memory_desc_t (which could change in future spec
versions) and querying the firmware instead of guessing about the
memmap size - Ard Biesheuvel
- Remove superfluous guid unparse calls - Ivan Khoronzhuk
- Delete unnecessary chosen@0 DT node FDT code since was duplicated
from code in drivers/of and is entirely unnecessary - Leif Lindholm
There's nothing super scary, mainly cleanups, and a merge from Ricardo who
kindly picked up some patches from the linux-efi mailing list while I
was out on annual leave in December.
Perhaps the biggest risk is the get_memory_map() change from Ard, which
changes the way that both the arm64 and x86 EFI boot stub build the
early memory map. It would be good to have it bake in linux-next for a
while.
"
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Due to some scary special case handling noticed in drivers/of, various
bits of the ARM* EFI support patches did duplicate looking for @0
variants of various nodes. Unless on an ancient PPC system, these are
not in fact required. Most instances have become refactored out along
the way, this removes the last one.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
There is no reason to translate guid number to string here.
So remove it in order to not do unneeded work.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
This fixes two minor issues in the implementation of get_memory_map():
- Currently, it assumes that sizeof(efi_memory_desc_t) == desc_size,
which is usually true, but not mandated by the spec. (This was added
intentionally to allow future additions to the definition of
efi_memory_desc_t). The way the loop is implemented currently, the
added slack space may be insufficient if desc_size is larger, which in
some corner cases could result in the loop never terminating.
- It allocates 32 efi_memory_desc_t entries first (again, using the size
of the struct instead of desc_size), and frees and reallocates if it
turns out to be insufficient. Few implementations of UEFI have such small
memory maps, which results in a unnecessary allocate/free pair on each
invocation.
Fix this by calling the get_memory_map() boot service first with a '0'
input value for map size to retrieve the map size and desc size from the
firmware and only then perform the allocation, using desc_size rather
than sizeof(efi_memory_desc_t).
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
The "> 0" here should ">= 0" so we free map_entries[0].
Fixes: 926172d460 ('efi: Export EFI runtime memory mapping to sysfs')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
This ensures all stub component are freed when the kernel proper is
done booting, by prefixing the names of all ELF sections that have
the SHF_ALLOC attribute with ".init". This approach ensures that even
implicitly emitted allocated data (like initializer values and string
literals) are covered.
At the same time, remove some __init annotations in the stub that have
now become redundant, and add the __init annotation to handle_kernel_image
which will now trigger a section mismatch warning without it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
In order to support kexec, the kernel needs to be able to deal with the
state of the UEFI firmware after SetVirtualAddressMap() has been called.
To avoid having separate code paths for non-kexec and kexec, let's move
the call to SetVirtualAddressMap() to the stub: this will guarantee us
that it will only be called once (since the stub is not executed during
kexec), and ensures that the UEFI state is identical between kexec and
normal boot.
This implies that the layout of the virtual mapping needs to be created
by the stub as well. All regions are rounded up to a naturally aligned
multiple of 64 KB (for compatibility with 64k pages kernels) and recorded
in the UEFI memory map. The kernel proper reads those values and installs
the mappings in a dedicated set of page tables that are swapped in during
UEFI Runtime Services calls.
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In some cases (e.g. Intel Bay Trail machines), the kernel will happily
run in 64-bit even if the underlying UEFI firmware platform is
32-bit. That's great, but it's difficult for userland utilities like
grub-install to do the right thing in such a situation.
The kernel already knows about the size of the firmware via
efi_enabled(EFI_64BIT). Add an extra sysfs interface
/sys/firmware/efi/fw_platform_size to expose that information to
userland for low-level utilities to use.
Signed-off-by: Steve McIntyre <steve@einval.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
On systems with 64 KB pages, it is preferable for UEFI memory map
entries to be 64 KB aligned multiples of 64 KB, because it relieves
us of having to deal with the residues.
So, if EFI_ALLOC_ALIGN is #define'd by the platform, use it to round
up all memory allocations made.
Acked-by: Matt Fleming <matt.fleming@intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Split of the remapping code from efi_config_init() so that the caller
can perform its own remapping. This is necessary to correctly handle
virtually remapped UEFI memory regions under kexec, as efi.systab will
have been updated to a virtual address.
Acked-by: Matt Fleming <matt.fleming@intel.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Call it what it does - "unparse" is plain-misleading.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Matt Domsch changed the dell page to point to the new upstream quite
some time ago; kernel should reflect that here as well.
Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Here's the set of driver core patches for 3.19-rc1.
They are dominated by the removal of the .owner field in platform
drivers. They touch a lot of files, but they are "simple" changes, just
removing a line in a structure.
Other than that, a few minor driver core and debugfs changes. There are
some ath9k patches coming in through this tree that have been acked by
the wireless maintainers as they relied on the debugfs changes.
Everything has been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlSOD20ACgkQMUfUDdst+ylLPACg2QrW1oHhdTMT9WI8jihlHVRM
53kAoLeteByQ3iVwWurwwseRPiWa8+MI
=OVRS
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core update from Greg KH:
"Here's the set of driver core patches for 3.19-rc1.
They are dominated by the removal of the .owner field in platform
drivers. They touch a lot of files, but they are "simple" changes,
just removing a line in a structure.
Other than that, a few minor driver core and debugfs changes. There
are some ath9k patches coming in through this tree that have been
acked by the wireless maintainers as they relied on the debugfs
changes.
Everything has been in linux-next for a while"
* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
fs: debugfs: add forward declaration for struct device type
firmware class: Deletion of an unnecessary check before the function call "vunmap"
firmware loader: fix hung task warning dump
devcoredump: provide a one-way disable function
device: Add dev_<level>_once variants
ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
ath: use seq_file api for ath9k debugfs files
debugfs: add helper function to create device related seq_file
drivers/base: cacheinfo: remove noisy error boot message
Revert "core: platform: add warning if driver has no owner"
drivers: base: support cpu cache information interface to userspace via sysfs
drivers: base: add cpu_device_create to support per-cpu devices
topology: replace custom attribute macros with standard DEVICE_ATTR*
cpumask: factor out show_cpumap into separate helper function
driver core: Fix unbalanced device reference in drivers_probe
driver core: fix race with userland in device_add()
sysfs/kernfs: make read requests on pre-alloc files use the buffer.
sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
fs: sysfs: return EGBIG on write if offset is larger than file size
...
to the trace_seq code. It also removed the return values to the
trace_seq_*() functions and use trace_seq_has_overflowed() to see if
the buffer filled up or not. This is similar to work being done to the
seq_file code as well in another tree.
Some of the other goodies include:
o Added some "!" (NOT) logic to the tracing filter.
o Fixed the frame pointer logic to the x86_64 mcount trampolines
o Added the logic for dynamic trampolines on !CONFIG_PREEMPT systems.
That is, the ftrace trampoline can be dynamically allocated
and be called directly by functions that only have a single hook
to them.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUhbLGAAoJEEjnJuOKh9ldRV4H/3NcLbgGB2iu96la1zdYE6pG
Q7cDJMxXK80YIIL70h9G0IItcD4t62LMb72lfBnMGRj3msgFb3AgISW57EuI0Pxk
xk24wuIPoTG2S7v9sc3SboNFwO8qbtIjxD2OBmqIUrGo2sZIiGjyj3gX7mCY3uzL
WB2bUOSFz/22OgaANinR5EELHA3pZZCf54Vz1K9ndmtK0xp0j1a7xJShD6TrMdYv
mZ3zH5ViIhW4A3mdcMceh6fy2JLQAiEKF0uPTvcMMz7NlVul0mxyL/+10P7AE/3R
Ehw4fzmm4NDshPDtBOkKH0LsppgXzuItFuQUTpact3JlqTg++bV6onSsrkt1hlY=
=Z7Cm
-----END PGP SIGNATURE-----
Merge tag 'trace-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"There was a lot of clean ups and minor fixes. One of those clean ups
was to the trace_seq code. It also removed the return values to the
trace_seq_*() functions and use trace_seq_has_overflowed() to see if
the buffer filled up or not. This is similar to work being done to
the seq_file code as well in another tree.
Some of the other goodies include:
- Added some "!" (NOT) logic to the tracing filter.
- Fixed the frame pointer logic to the x86_64 mcount trampolines
- Added the logic for dynamic trampolines on !CONFIG_PREEMPT systems.
That is, the ftrace trampoline can be dynamically allocated and be
called directly by functions that only have a single hook to them"
* tag 'trace-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (55 commits)
tracing: Truncated output is better than nothing
tracing: Add additional marks to signal very large time deltas
Documentation: describe trace_buf_size parameter more accurately
tracing: Allow NOT to filter AND and OR clauses
tracing: Add NOT to filtering logic
ftrace/fgraph/x86: Have prepare_ftrace_return() take ip as first parameter
ftrace/x86: Get rid of ftrace_caller_setup
ftrace/x86: Have save_mcount_regs macro also save stack frames if needed
ftrace/x86: Add macro MCOUNT_REG_SIZE for amount of stack used to save mcount regs
ftrace/x86: Simplify save_mcount_regs on getting RIP
ftrace/x86: Have save_mcount_regs store RIP in %rdi for first parameter
ftrace/x86: Rename MCOUNT_SAVE_FRAME and add more detailed comments
ftrace/x86: Move MCOUNT_SAVE_FRAME out of header file
ftrace/x86: Have static tracing also use ftrace_caller_setup
ftrace/x86: Have static function tracing always test for function graph
kprobes: Add IPMODIFY flag to kprobe_ftrace_ops
ftrace, kprobes: Support IPMODIFY flag to find IP modify conflict
kprobes/ftrace: Recover original IP if pre_handler doesn't change it
tracing/trivial: Fix typos and make an int into a bool
tracing: Deletion of an unnecessary check before iput()
...
Pull EFI updates from Ingo Molnar:
"Changes in this cycle are:
- support module unload for efivarfs (Mathias Krause)
- another attempt at moving x86 to libstub taking advantage of the
__pure attribute (Ard Biesheuvel)
- add EFI runtime services section to ptdump (Mathias Krause)"
* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, ptdump: Add section for EFI runtime services
efi/x86: Move x86 back to libstub
efivarfs: Allow unloading when build as module
Use the helper function trace_seq_buffer_ptr() to get the current location
of the next buffer write of a trace_seq object, instead of open coding
it.
This facilitates the conversion of trace_seq to use seq_buf.
Tested-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Cc: Chen Gong <gong.chen@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This reverts commit 84be880560, which itself reverted my original
attempt to move x86 from #include'ing .c files from across the tree
to using the EFI stub built as a static library.
The issue that affected the original approach was that splitting
the implementation into several .o files resulted in the variable
'efi_early' becoming a global with external linkage, which under
-fPIC implies that references to it must go through the GOT. However,
dealing with this additional GOT entry turned out to be troublesome
on some EFI implementations. (GCC's visibility=hidden attribute is
supposed to lift this requirement, but it turned out not to work on
the 32-bit build.)
Instead, use a pure getter function to get a reference to efi_early.
This approach results in no additional GOT entries being generated,
so there is no need for any changes in the early GOT handling.
Tested-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
In the absence of a DTB configuration table, the EFI stub will happily
continue attempting to boot a kernel, despite the fact that this kernel
may not function without a description of the hardware. In this case, as
with a typo'd "dtb=" option (e.g. "dbt=") or many other possible
failures, the only output seen by the user will be the rather terse
output from the EFI stub:
EFI stub: Booting Linux Kernel...
To aid those attempting to debug such failures, this patch adds a notice
when no DTB is found, making the output more helpful:
EFI stub: Booting Linux Kernel...
EFI stub: Generating empty DTB
Additionally, a positive acknowledgement is added when a user-specified
DTB is in use:
EFI stub: Booting Linux Kernel...
EFI stub: Using DTB from command line
Similarly, a positive acknowledgement is added when a DTB from a
configuration table is in use:
EFI stub: Booting Linux Kernel...
EFI stub: Using DTB from configuration table
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Roy Franz <roy.franz@linaro.org>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The DMTF SMBIOS reference spec v3.0.0 defines a new 64-bit entry point,
which enables support for SMBIOS structure tables residing at a physical
offset over 4 GB. This is especially important for upcoming arm64
platforms whose system RAM resides entirely above the 4 GB boundary.
For the UEFI case, this code attempts to detect the new SMBIOS 3.0
header magic at the offset passed in the SMBIOS3_TABLE_GUID UEFI
configuration table. If this configuration table is not provided, or
if we fail to parse the header, we fall back to using the legacy
SMBIOS_TABLE_GUID configuration table. This is in line with the spec,
that allows both configuration tables to be provided, but mandates that
they must point to the same structure table, unless the version pointed
to by the 64-bit entry point is a superset of the 32-bit one.
For the non-UEFI case, the detection logic is modified to look for the
SMBIOS 3.0 header magic before it looks for the legacy header magic.
Note that this patch is based on version 3.0.0d [draft] of the
specification, which is expected not to deviate from the final version
in ways that would affect the correctness of this implementation.
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tony Luck <tony.luck@intel.com>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This adds support to the UEFI side for detecting the presence of
a SMBIOS 3.0 64-bit entry point. This allows the actual SMBIOS
structure table to reside at a physical offset over 4 GB, which
cannot be supported by the legacy SMBIOS 32-bit entry point.
Since the firmware can legally provide both entry points, store
the SMBIOS 3.0 entry point in a separate variable, and let the
DMI decoding layer decide which one will be used.
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Pull x86 EFI updates from Peter Anvin:
"This patchset falls under the "maintainers that grovel" clause in the
v3.18-rc1 announcement. We had intended to push it late in the merge
window since we got it into the -tip tree relatively late.
Many of these are relatively simple things, but there are a couple of
key bits, especially Ard's and Matt's patches"
* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
rtc: Disable EFI rtc for x86
efi: rtc-efi: Export platform:rtc-efi as module alias
efi: Delete the in_nmi() conditional runtime locking
efi: Provide a non-blocking SetVariable() operation
x86/efi: Adding efi_printks on memory allocationa and pci.reads
x86/efi: Mark initialization code as such
x86/efi: Update comment regarding required phys mapped EFI services
x86/efi: Unexport add_efi_memmap variable
x86/efi: Remove unused efi_call* macros
efi: Resolve some shadow warnings
arm64: efi: Format EFI memory type & attrs with efi_md_typeattr_format()
ia64: efi: Format EFI memory type & attrs with efi_md_typeattr_format()
x86: efi: Format EFI memory type & attrs with efi_md_typeattr_format()
efi: Introduce efi_md_typeattr_format()
efi: Add macro for EFI_MEMORY_UCE memory attribute
x86/efi: Clear EFI_RUNTIME_SERVICES if failing to enter virtual mode
arm64/efi: Do not enter virtual mode if booting with efi=noruntime or noefi
arm64/efi: uefi_init error handling fix
efi: Add kernel param efi=noruntime
lib: Add a generic cmdline parse function parse_option_str
...
By the following commits, we prevented from allocating firmware_map_entry
of same memory range:
f0093ede: drivers/firmware/memmap.c: don't allocate firmware_map_entry
of same memory range
49c8b24d: drivers/firmware/memmap.c: pass the correct argument to
firmware_map_find_entry_bootmem()
But it's not enough. When PNP0C80 device is added by acpi_scan_init(),
memmap sysfses of same firmware_map_entry are created twice as follows:
# cat /sys/firmware/memmap/*/start
0x40000000000
0x60000000000
0x4a837000
0x4a83a000
0x4a8b5000
...
0x40000000000
0x60000000000
...
The flows of the issues are as follows:
1. e820_reserve_resources() allocates firmware_map_entrys of all
memory ranges defined in e820. And, these firmware_map_entrys
are linked with map_entries list.
map_entries -> entry 1 -> ... -> entry N
2. When PNP0C80 device is limited by mem= boot option, acpi_scan_init()
added the memory device. In this case, firmware_map_add_hotplug()
allocates firmware_map_entry and creates memmap sysfs.
map_entries -> entry 1 -> ... -> entry N -> entry N+1
|
memmap 1
3. firmware_memmap_init() creates memmap sysfses of firmware_map_entrys
linked with map_entries.
map_entries -> entry 1 -> ... -> entry N -> entry N+1
| | |
memmap 2 memmap N+1 memmap 1
memmap N+2
So while hot removing the PNP0C80 device, kernel panic occurs as follows:
BUG: unable to handle kernel paging request at 00000001003e000b
IP: sysfs_open_file+0x46/0x2b0
PGD 203a89fe067 PUD 0
Oops: 0000 [#1] SMP
...
Call Trace:
do_dentry_open+0x1ef/0x2a0
finish_open+0x31/0x40
do_last+0x57c/0x1220
path_openat+0xc2/0x4c0
do_filp_open+0x4b/0xb0
do_sys_open+0xf3/0x1f0
SyS_open+0x1e/0x20
system_call_fastpath+0x16/0x1b
The patch adds a check of confirming whether memmap sysfs of
firmware_map_entry has been created, and does not create memmap
sysfs of same firmware_map_entry.
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
commit 5dc3826d9f08 ("efi: Implement mandatory locking for UEFI Runtime
Services") implemented some conditional locking when accessing variable
runtime services that Ingo described as "pretty disgusting".
The intention with the !efi_in_nmi() checks was to avoid live-locks when
trying to write pstore crash data into an EFI variable. Such lockless
accesses are allowed according to the UEFI specification when we're in a
"non-recoverable" state, but whether or not things are implemented
correctly in actual firmware implementations remains an unanswered
question, and so it would seem sensible to avoid doing any kind of
unsynchronized variable accesses.
Furthermore, the efi_in_nmi() tests are inadequate because they don't
account for the case where we call EFI variable services from panic or
oops callbacks and aren't executing in NMI context. In other words,
live-locking is still possible.
Let's just remove the conditional locking altogether. Now we've got the
->set_variable_nonblocking() EFI variable operation we can abort if the
runtime lock is already held. Aborting is by far the safest option.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
There are some circumstances that call for trying to write an EFI
variable in a non-blocking way. One such scenario is when writing pstore
data in efi_pstore_write() via the pstore_dump() kdump callback.
Now that we have an EFI runtime spinlock we need a way of aborting if
there is contention instead of spinning, since when writing pstore data
from the kdump callback, the runtime lock may already be held by the CPU
that's running the callback if we crashed in the middle of an EFI
variable operation.
The situation is sufficiently special that a new EFI variable operation
is warranted.
Introduce ->set_variable_nonblocking() for this use case. It is an
optional EFI backend operation, and need only be implemented by those
backends that usually acquire locks to serialize access to EFI
variables, as is the case for virt_efi_set_variable() where we now grab
the EFI runtime spinlock.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
It is a really bad idea to declare variables or parameters that
have the same name as common types. It is valid C, but it gets
surprising if a macro expansion attempts to declare an inner
local with that type. Change the local names to eliminate the
hazard.
Change s16 => str16, s8 => str8.
This resolves warnings seen when using W=2 during make, for instance:
drivers/firmware/efi/vars.c: In function ‘dup_variable_bug’:
drivers/firmware/efi/vars.c:324:44: warning: declaration of ‘s16’ shadows a global declaration [-Wshadow]
static void dup_variable_bug(efi_char16_t *s16, efi_guid_t *vendor_guid,
drivers/firmware/efi/vars.c:328:8: warning: declaration of ‘s8’ shadows a global declaration [-Wshadow]
char *s8;
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
At the moment, there are three architectures debug-printing the EFI memory
map at initialization: x86, ia64, and arm64. They all use different format
strings, plus the EFI memory type and the EFI memory attributes are
similarly hard to decode for a human reader.
Introduce a helper __init function that formats the memory type and the
memory attributes in a unified way, to a user-provided character buffer.
The array "memory_type_name" is copied from the arm64 code, temporarily
duplicating it. The (otherwise optional) braces around each string literal
in the initializer list are dropped in order to match the kernel coding
style more closely. The element size is tightened from 32 to 20 bytes
(maximum actual string length + 1) so that we can derive the field width
from the element size.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[ Dropped useless 'register' keyword, which compiler will ignore ]
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
noefi kernel param means actually disabling efi runtime, Per suggestion
from Leif Lindholm efi=noruntime should be better. But since noefi is
already used in X86 thus just adding another param efi=noruntime for
same purpose.
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
noefi param can be used for arches other than X86 later, thus move it
out of x86 platform code.
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
We need a way to customize the behaviour of the EFI boot stub, in
particular, we need a way to disable the "chunking" workaround, used
when reading files from the EFI System Partition.
One of my machines doesn't cope well when reading files in 1MB chunks to
a buffer above the 4GB mark - it appears that the "chunking" bug
workaround triggers another firmware bug. This was only discovered with
commit 4bf7111f50 ("x86/efi: Support initrd loaded above 4G"), and
that commit is perfectly valid. The symptom I observed was a corrupt
initrd rather than any kind of crash.
efi= is now used to specify EFI parameters in two very different
execution environments, the EFI boot stub and during kernel boot.
There is also a slight performance optimization by enabling efi=nochunk,
but that's offset by the fact that you're more likely to run into
firmware issues, at least on x86. This is the rationale behind leaving
the workaround enabled by default.
Also provide some documentation for EFI_READ_CHUNK_SIZE and why we're
using the current value of 1MB.
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Roy Franz <roy.franz@linaro.org>
Cc: Maarten Lankhorst <m.b.lankhorst@gmail.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
According to section 7.1 of the UEFI spec, Runtime Services are not fully
reentrant, and there are particular combinations of calls that need to be
serialized. Use a spinlock to serialize all Runtime Services with respect
to all others, even if this is more than strictly needed.
We've managed to get away without requiring a runtime services lock
until now because most of the interactions with EFI involve EFI
variables, and those operations are already serialised with
__efivars->lock.
Some of the assumptions underlying the decision whether locks are
needed or not (e.g., SetVariable() against ResetSystem()) may not
apply universally to all [new] architectures that implement UEFI.
Rather than try to reason our way out of this, let's just implement at
least what the spec requires in terms of locking.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
This reverts commit f23cf8bd5c ("efi/x86: efistub: Move shared
dependencies to <asm/efi.h>") as well as the x86 parts of commit
f4f75ad574 ("efi: efistub: Convert into static library").
The road leading to these two reverts is long and winding.
The above two commits were merged during the v3.17 merge window and
turned the common EFI boot stub code into a static library. This
necessitated making some symbols global in the x86 boot stub which
introduced new entries into the early boot GOT.
The problem was that we weren't fixing up the newly created GOT entries
before invoking the EFI boot stub, which sometimes resulted in hangs or
resets. This failure was reported by Maarten on his Macbook pro.
The proposed fix was commit 9cb0e39423 ("x86/efi: Fixup GOT in all
boot code paths"). However, that caused issues for Linus when booting
his Sony Vaio Pro 11. It was subsequently reverted in commit
f3670394c2.
So that leaves us back with Maarten's Macbook pro not booting.
At this stage in the release cycle the least risky option is to revert
the x86 EFI boot stub to the pre-merge window code structure where we
explicitly #include efi-stub-helper.c instead of linking with the static
library. The arm64 code remains unaffected.
We can take another swing at the x86 parts for v3.18.
Conflicts:
arch/x86/include/asm/efi.h
Tested-by: Josh Boyer <jwboyer@fedoraproject.org>
Tested-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org> [arm64]
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>,
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Commit 86c8b27a01cf:
"arm64: ignore DT memreserve entries when booting in UEFI mode
prevents early_init_fdt_scan_reserved_mem() from being called for
arm64 kernels booting via UEFI. This was done because the kernel
will use the UEFI memory map to determine reserved memory regions.
That approach has problems in that early_init_fdt_scan_reserved_mem()
also reserves the FDT itself and any node-specific reserved memory.
By chance of some kernel configs, the FDT may be overwritten before
it can be unflattened and the kernel will fail to boot. More subtle
problems will result if the FDT has node specific reserved memory
which is not really reserved.
This patch has the UEFI stub remove the memory reserve map entries
from the FDT as it does with the memory nodes. This allows
early_init_fdt_scan_reserved_mem() to be called unconditionally
so that the other needed reservations are made.
Signed-off-by: Mark Salter <msalter@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
spin_is_locked() always returns false for uniprocessor configurations
in several architectures, so do not use WARN_ON with it.
Use lockdep_assert_held() instead to also reduce overhead in
non-debug kernels.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
This patch does two things. It passes EFI run time mappings to second
kernel in bootparams efi_info. Second kernel parse this info and create
new mappings in second kernel. That means mappings in first and second
kernel will be same. This paves the way to enable EFI in kexec kernel.
This patch also prepares and passes EFI setup data through bootparams.
This contains bunch of information about various tables and their
addresses.
These information gathering and passing has been written along the lines
of what current kexec-tools is doing to make kexec work with UEFI.
[akpm@linux-foundation.org: s/get_efi/efi_get/g, per Matt]
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: WANG Chao <chaowang@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Matt Fleming <matt@console-pimps.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge incoming from Andrew Morton:
- Various misc things.
- arch/sh updates.
- Part of ocfs2. Review is slow.
- Slab updates.
- Most of -mm.
- printk updates.
- lib/ updates.
- checkpatch updates.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (226 commits)
checkpatch: update $declaration_macros, add uninitialized_var
checkpatch: warn on missing spaces in broken up quoted
checkpatch: fix false positives for --strict "space after cast" test
checkpatch: fix false positive MISSING_BREAK warnings with --file
checkpatch: add test for native c90 types in unusual order
checkpatch: add signed generic types
checkpatch: add short int to c variable types
checkpatch: add for_each tests to indentation and brace tests
checkpatch: fix brace style misuses of else and while
checkpatch: add --fix option for a couple OPEN_BRACE misuses
checkpatch: use the correct indentation for which()
checkpatch: add fix_insert_line and fix_delete_line helpers
checkpatch: add ability to insert and delete lines to patch/file
checkpatch: add an index variable for fixed lines
checkpatch: warn on break after goto or return with same tab indentation
checkpatch: emit a warning on file add/move/delete
checkpatch: add test for commit id formatting style in commit log
checkpatch: emit fewer kmalloc_array/kcalloc conversion warnings
checkpatch: improve "no space after cast" test
checkpatch: allow multiple const * types
...
- ACPICA update to upstream version 20140724. That includes
ACPI 5.1 material (support for the _CCA and _DSD predefined names,
changes related to the DMAR and PCCT tables and ARM support among
other things) and cleanups related to using ACPICA's header files.
A major part of it is related to acpidump and the core code used
by that utility. Changes from Bob Moore, David E Box, Lv Zheng,
Sascha Wildner, Tomasz Nowicki, Hanjun Guo.
- Radix trees for memory bitmaps used by the hibernation core from
Joerg Roedel.
- Support for waking up the system from suspend-to-idle (also known
as the "freeze" sleep state) using ACPI-based PCI wakeup signaling
(Rafael J Wysocki).
- Fixes for issues related to ACPI button events (Rafael J Wysocki).
- New device ID for an ACPI-enumerated device included into the
Wildcat Point PCH from Jie Yang.
- ACPI video updates related to backlight handling from Hans de Goede
and Linus Torvalds.
- Preliminary changes needed to support ACPI on ARM from Hanjun Guo
and Graeme Gregory.
- ACPI PNP core cleanups from Arjun Sreedharan and Zhang Rui.
- Cleanups related to ACPI_COMPANION() and ACPI_HANDLE() macros
(Rafael J Wysocki).
- ACPI-based device hotplug cleanups from Wei Yongjun and
Rafael J Wysocki.
- Cleanups and improvements related to system suspend from
Lan Tianyu, Randy Dunlap and Rafael J Wysocki.
- ACPI battery cleanup from Wei Yongjun.
- cpufreq core fixes from Viresh Kumar.
- Elimination of a deadband effect from the cpufreq ondemand
governor and intel_pstate driver cleanups from Stratos Karafotis.
- 350MHz CPU support for the powernow-k6 cpufreq driver from
Mikulas Patocka.
- Fix for the imx6 cpufreq driver from Anson Huang.
- cpuidle core and governor cleanups from Daniel Lezcano,
Sandeep Tripathy and Mohammad Merajul Islam Molla.
- Build fix for the big_little cpuidle driver from Sachin Kamat.
- Configuration fix for the Operation Performance Points (OPP)
framework from Mark Brown.
- APM cleanup from Jean Delvare.
- cpupower utility fixes and cleanups from Peter Senna Tschudin,
Andrey Utkin, Himangi Saraogi, Rickard Strandqvist, Thomas Renninger.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=ZODv
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
"Again, ACPICA leads the pack (47 commits), followed by cpufreq (18
commits) and system suspend/hibernation (9 commits).
From the new code perspective, the ACPICA update brings ACPI 5.1 to
the table, including a new device configuration object called _DSD
(Device Specific Data) that will hopefully help us to operate device
properties like Device Trees do (at least to some extent) and changes
related to supporting ACPI on ARM.
Apart from that we have hibernation changes making it use radix trees
to store memory bitmaps which should speed up some operations carried
out by it quite significantly. We also have some power management
changes related to suspend-to-idle (the "freeze" sleep state) support
and more preliminary changes needed to support ACPI on ARM (outside of
ACPICA).
The rest is fixes and cleanups pretty much everywhere.
Specifics:
- ACPICA update to upstream version 20140724. That includes ACPI 5.1
material (support for the _CCA and _DSD predefined names, changes
related to the DMAR and PCCT tables and ARM support among other
things) and cleanups related to using ACPICA's header files. A
major part of it is related to acpidump and the core code used by
that utility. Changes from Bob Moore, David E Box, Lv Zheng,
Sascha Wildner, Tomasz Nowicki, Hanjun Guo.
- Radix trees for memory bitmaps used by the hibernation core from
Joerg Roedel.
- Support for waking up the system from suspend-to-idle (also known
as the "freeze" sleep state) using ACPI-based PCI wakeup signaling
(Rafael J Wysocki).
- Fixes for issues related to ACPI button events (Rafael J Wysocki).
- New device ID for an ACPI-enumerated device included into the
Wildcat Point PCH from Jie Yang.
- ACPI video updates related to backlight handling from Hans de Goede
and Linus Torvalds.
- Preliminary changes needed to support ACPI on ARM from Hanjun Guo
and Graeme Gregory.
- ACPI PNP core cleanups from Arjun Sreedharan and Zhang Rui.
- Cleanups related to ACPI_COMPANION() and ACPI_HANDLE() macros
(Rafael J Wysocki).
- ACPI-based device hotplug cleanups from Wei Yongjun and Rafael J
Wysocki.
- Cleanups and improvements related to system suspend from Lan
Tianyu, Randy Dunlap and Rafael J Wysocki.
- ACPI battery cleanup from Wei Yongjun.
- cpufreq core fixes from Viresh Kumar.
- Elimination of a deadband effect from the cpufreq ondemand governor
and intel_pstate driver cleanups from Stratos Karafotis.
- 350MHz CPU support for the powernow-k6 cpufreq driver from Mikulas
Patocka.
- Fix for the imx6 cpufreq driver from Anson Huang.
- cpuidle core and governor cleanups from Daniel Lezcano, Sandeep
Tripathy and Mohammad Merajul Islam Molla.
- Build fix for the big_little cpuidle driver from Sachin Kamat.
- Configuration fix for the Operation Performance Points (OPP)
framework from Mark Brown.
- APM cleanup from Jean Delvare.
- cpupower utility fixes and cleanups from Peter Senna Tschudin,
Andrey Utkin, Himangi Saraogi, Rickard Strandqvist, Thomas
Renninger"
* tag 'pm+acpi-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (118 commits)
ACPI / LPSS: add LPSS device for Wildcat Point PCH
ACPI / PNP: Replace faulty is_hex_digit() by isxdigit()
ACPICA: Update version to 20140724.
ACPICA: ACPI 5.1: Update for PCCT table changes.
ACPICA/ARM: ACPI 5.1: Update for GTDT table changes.
ACPICA/ARM: ACPI 5.1: Update for MADT changes.
ACPICA/ARM: ACPI 5.1: Update for FADT changes.
ACPICA: ACPI 5.1: Support for the _CCA predifined name.
ACPICA: ACPI 5.1: New notify value for System Affinity Update.
ACPICA: ACPI 5.1: Support for the _DSD predefined name.
ACPICA: Debug object: Add current value of Timer() to debug line prefix.
ACPICA: acpihelp: Add UUID support, restructure some existing files.
ACPICA: Utilities: Fix local printf issue.
ACPICA: Tables: Update for DMAR table changes.
ACPICA: Remove some extraneous printf arguments.
ACPICA: Update for comments/formatting. No functional changes.
ACPICA: Disassembler: Add support for the ToUUID opererator (macro).
ACPICA: Remove a redundant cast to acpi_size for ACPI_OFFSET() macro.
ACPICA: Work around an ancient GCC bug.
ACPI / processor: Make it possible to get local x2apic id via _MAT
...
When limiting memory by mem= and ACPI DSDT table has PNP0C80,
firmware_map_entrys of same memory range are allocated and memmap X
sysfses which have same memory range are created as follows:
# cat /sys/firmware/memmap/0/*
0x407ffffffff
0x40000000000
System RAM
# cat /sys/firmware/memmap/33/*
0x407ffffffff
0x40000000000
System RAM
# cat /sys/firmware/memmap/35/*
0x407ffffffff
0x40000000000
System RAM
In this case, when hot-removing memory, kernel panic occurs, showing
following call trace:
BUG: unable to handle kernel paging request at 00000001003e000b
IP: sysfs_open_file+0x46/0x2b0
PGD 203a89fe067 PUD 0
Oops: 0000 [#1] SMP
...
Call Trace:
do_dentry_open+0x1ef/0x2a0
finish_open+0x31/0x40
do_last+0x57c/0x1220
path_openat+0xc2/0x4c0
do_filp_open+0x4b/0xb0
do_sys_open+0xf3/0x1f0
SyS_open+0x1e/0x20
system_call_fastpath+0x16/0x1b
The problem occurs as follows:
When calling e820_reserve_resources(), firmware_map_entrys of all e820
memory map are allocated. And all firmware_map_entrys is added
map_entries list as follows:
map_entries
-> +--- entry A --------+ -> ...
| start 0x407ffffffff|
| end 0x40000000000|
| type System RAM |
+--------------------+
After that, if ACPI DSDT table has PNP0C80 and the memory range is
limited by mem=, the PNP0C80 is hot-added. Then firmware_map_entry of
PNP0C80 is allocated and added map_entries list as follows:
map_entries
-> +--- entry A --------+ -> ... -> +--- entry B --------+
| start 0x407ffffffff| | start 0x407ffffffff|
| end 0x40000000000| | end 0x40000000000|
| type System RAM | | type System RAM |
+--------------------+ +--------------------+
Then memmap 0 sysfs for entry B is created.
After that, firmware_memmap_init() creates memmap sysfses of all
firmware_map_entrys in map_entries list. As a result, memmap 33 sysfs
for entry A and memmap 35 sysfs for entry B are created. But kobject of
entry B has been used by memmap 0 sysfs. So when creating memmap 35
sysfs, the kobject is broken.
If hot-removing memory, memmap 0 sysfs is destroyed and kobject of
memmap 0 sysfs is freed. But the kobject can be accessed via memmap 35
sysfs. So when open memmap 35 sysfs, kernel panic occurs.
This patch checks whether there is firmware_map_entry of same memory
range in map_entries list and don't allocate firmware_map_entry of same
memroy range.
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
firmware_map_add_hotplug() calls firmware_map_find_entry_bootmem() to
get free firmware_map_entry. But end arguments is not correct. So
firmware_map_find_entry_bootmem() cannot not find firmware_map_entry.
The patch passes the correct end argument to firmware_map_find_entry_bootmem().
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull RAS updates from Ingo Molnar:
"The main changes in this cycle are:
- RAS tracing/events infrastructure, by Gong Chen.
- Various generalizations of the APEI code to make it available to
non-x86 architectures, by Tomasz Nowicki"
* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ras: Fix build warnings in <linux/aer.h>
acpi, apei, ghes: Factor out ioremap virtual memory for IRQ and NMI context.
acpi, apei, ghes: Make NMI error notification to be GHES architecture extension.
apei, mce: Factor out APEI architecture specific MCE calls.
RAS, extlog: Adjust init flow
trace, eMCA: Add a knob to adjust where to save event log
trace, RAS: Add eMCA trace event interface
RAS, debugfs: Add debugfs interface for RAS subsystem
CPER: Adjust code flow of some functions
x86, MCE: Robustify mcheck_init_device
trace, AER: Move trace into unified interface
trace, RAS: Add basic RAS trace event
x86, MCE: Kill CPU_POST_DEAD
Pull EFI changes from Ingo Molnar:
"Main changes in this cycle are:
- arm64 efi stub fixes, preservation of FP/SIMD registers across
firmware calls, and conversion of the EFI stub code into a static
library - Ard Biesheuvel
- Xen EFI support - Daniel Kiper
- Support for autoloading the efivars driver - Lee, Chun-Yi
- Use the PE/COFF headers in the x86 EFI boot stub to request that
the stub be loaded with CONFIG_PHYSICAL_ALIGN alignment - Michael
Brown
- Consolidate all the x86 EFI quirks into one file - Saurabh Tangri
- Additional error logging in x86 EFI boot stub - Ulf Winkelvos
- Support loading initrd above 4G in EFI boot stub - Yinghai Lu
- EFI reboot patches for ACPI hardware reduced platforms"
* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
efi/arm64: Handle missing virtual mapping for UEFI System Table
arch/x86/xen: Silence compiler warnings
xen: Silence compiler warnings
x86/efi: Request desired alignment via the PE/COFF headers
x86/efi: Add better error logging to EFI boot stub
efi: Autoload efivars
efi: Update stale locking comment for struct efivars
arch/x86: Remove efi_set_rtc_mmss()
arch/x86: Replace plain strings with constants
xen: Put EFI machinery in place
xen: Define EFI related stuff
arch/x86: Remove redundant set_bit(EFI_MEMMAP) call
arch/x86: Remove redundant set_bit(EFI_SYSTEM_TABLES) call
efi: Introduce EFI_PARAVIRT flag
arch/x86: Do not access EFI memory map if it is not available
efi: Use early_mem*() instead of early_io*()
arch/ia64: Define early_memunmap()
x86/reboot: Add EFI reboot quirk for ACPI Hardware Reduced flag
efi/reboot: Allow powering off machines using EFI
efi/reboot: Add generic wrapper around EfiResetSystem()
...
The primary dependency is that GHES uses the x86 NMI for hardware
error notification and MCE for memory error handling. These patches
remove that dependency.
Other APEI features such as error reporting via external IRQ, error
serialization, or error injection, do not require changes to use them
on non-x86 architectures.
The following patch set eliminates the APEI Kconfig x86 dependency
by making these changes:
- treat NMI notification as GHES architecture - HAVE_ACPI_APEI_NMI
- group and wrap around #ifdef CONFIG_HAVE_ACPI_APEI_NMI code which
is used only for NMI path
- identify architectural boxes and abstract it accordingly (tlb flush and MCE)
- rework ioremap for both IRQ and NMI context
NMI code is kept in ghes.c file since NMI and IRQ context are tightly coupled.
Note, these patches introduce no functional changes for x86. The NMI notification
feature is hard selected for x86. Architectures that want to use this
feature should also provide NMI code infrastructure.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=nYdd
-----END PGP SIGNATURE-----
Merge tag 'please-pull-apei' into x86/ras
APEI is currently implemented so that it depends on x86 hardware.
The primary dependency is that GHES uses the x86 NMI for hardware
error notification and MCE for memory error handling. These patches
remove that dependency.
Other APEI features such as error reporting via external IRQ, error
serialization, or error injection, do not require changes to use them
on non-x86 architectures.
The following patch set eliminates the APEI Kconfig x86 dependency
by making these changes:
- treat NMI notification as GHES architecture - HAVE_ACPI_APEI_NMI
- group and wrap around #ifdef CONFIG_HAVE_ACPI_APEI_NMI code which
is used only for NMI path
- identify architectural boxes and abstract it accordingly (tlb flush and MCE)
- rework ioremap for both IRQ and NMI context
NMI code is kept in ghes.c file since NMI and IRQ context are tightly coupled.
Note, these patches introduce no functional changes for x86. The NMI notification
feature is hard selected for x86. Architectures that want to use this
feature should also provide NMI code infrastructure.
* acpica: (30 commits)
ACPICA: Add new GPE public interface - acpi_mark_gpe_for_wake.
ACPICA: GPEs: Do not allow enable for GPEs that have no handler(s).
ACPICA: Fix a regression for deletion of Alias() objects.
ACPICA: Update version to 20140627
ACPICA: Tables: Merge DMAR table structure updates
ACPICA: Hardware: back port of a recursive locking fix
ACPICA: utprint/oslibcfs: cleanup - no functional change
ACPICA: Executer: Fix trivial issues in acpi_get_serial_access_bytes()
ACPICA: OSL: Update acpidump to reduce source code differences
ACPICA: acpidump: Reduce freopen() invocations to improve portability
ACPICA: acpidump: Replace file IOs with new APIs to improve portability
ACPICA: acpidump: Remove exit() from generic layer to improve portability
ACPICA: acpidump: Add memory/string OSL usage to improve portability
ACPICA: Common: Enhance acpi_getopt() to improve portability
ACPICA: Common: Enhance cm_get_file_size() to improve portability
ACPICA: Application: Enhance ACPI_USAGE_xxx/ACPI_OPTION with acpi_os_printf() to improve portability
ACPICA: Utilities: Introduce acpi_log_error() to improve portability
ACPICA: Utilities: Add formatted printing APIs
ACPICA: OSL: Add portable file IO to improve portability
ACPICA: OSL: Clean up acpi_os_printf()/acpi_os_vprintf() stubs
...
The original patch is from Ben Hutchings's contribution to debian
kernel. Got Ben's permission to remove the code of efi-pstore.c and
send to linux-efi:
https://github.com/BlankOn/linux-debian/blob/master/debian/patches/features/all/efi-autoload-efivars.patch
efivars is generally useful to have on EFI systems, and in some cases
it may be impossible to load it after a kernel upgrade in order to
complete a boot loader update. At the same time we don't want to waste
memory on non-EFI systems by making them built-in.
Instead, give them module aliases as if they are platform drivers, and
register a corresponding platform device whenever EFI runtime services
are available. This should trigger udev to load them.
Signed-off-by: Lee, Chun-Yi <jlee@suse.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Introduce EFI_PARAVIRT flag. If it is set then kernel runs
on EFI platform but it has not direct control on EFI stuff
like EFI runtime, tables, structures, etc. If not this means
that Linux Kernel has direct access to EFI infrastructure
and everything runs as usual.
This functionality is used in Xen dom0 because hypervisor
has full control on EFI stuff and all calls from dom0 to
EFI must be requested via special hypercall which in turn
executes relevant EFI code in behalf of dom0.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Use early_mem*() instead of early_io*() because all mapped EFI regions
are memory (usually RAM but they could also be ROM, EPROM, EEPROM, flash,
etc.) not I/O regions. Additionally, I/O family calls do not work correctly
under Xen in our case. early_ioremap() skips the PFN to MFN conversion
when building the PTE. Using it for memory will attempt to map the wrong
machine frame. However, all artificial EFI structures created under Xen
live in dom0 memory and should be mapped/unmapped using early_mem*() family
calls which map domain memory.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Mark Salter <msalter@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
It appears that the BayTrail-T class of hardware requires EFI in order
to powerdown and reboot and no other reliable method exists.
This quirk is generally applicable to all hardware that has the ACPI
Hardware Reduced bit set, since usually ACPI would be the preferred
method.
Cc: Len Brown <len.brown@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Not only can EfiResetSystem() be used to reboot, it can also be used to
power down machines.
By and large, this functionality doesn't work very well across the range
of EFI machines in the wild, so it should definitely only be used as a
last resort. In an ideal world, this wouldn't be needed at all.
Unfortunately, we're starting to see machines where EFI is the *only*
reliable way to power down, and nothing else, not PCI, not ACPI, works.
efi_poweroff_required() should be implemented on a per-architecture
basis, since exactly when we should be using EFI runtime services is a
platform-specific decision. There's no analogue for reboot because each
architecture handles reboot very differently - the x86 code in
particular is pretty complex.
Patches to enable this for specific classes of hardware will be
submitted separately.
Tested-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Implement efi_reboot(), which is really just a wrapper around the
EfiResetSystem() EFI runtime service, but it does at least allow us to
funnel all callers through a single location.
It also simplifies the callsites since users no longer need to check to
see whether EFI_RUNTIME_SERVICES are enabled.
Cc: Tony Luck <tony.luck@intel.com>
Tested-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
This patch changes both x86 and arm64 efistub implementations
from #including shared .c files under drivers/firmware/efi to
building shared code as a static library.
The x86 code uses a stub built into the boot executable which
uncompresses the kernel at boot time. In this case, the library is
linked into the decompressor.
In the arm64 case, the stub is part of the kernel proper so the library
is linked into the kernel proper as well.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Currently, fdt_find_uefi_params() reports an error if no EFI parameters
are found in the DT. This is however a valid case for non-UEFI kernel
booting. This patch checks changes the error reporting to a
pr_info("UEFI not found") when no EFI parameters are found in the DT.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
In order to move from the #include "../../../xxxxx.c" anti-pattern used
by both the x86 and arm64 versions of the stub to a static library
linked into either the kernel proper (arm64) or a separate boot
executable (x86), there is some prepatory work required.
This patch does the following:
- move forward declarations of functions shared between the arch
specific and the generic parts of the stub to include/linux/efi.h
- move forward declarations of functions shared between various .c files
of the generic stub code to a new local header file called "efistub.h"
- add #includes to all .c files which were formerly relying on the
#includor to include the correct header files
- remove all static modifiers from functions which will need to be
externally visible once we move to a static library
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
In order for other archs (such as arm64) to be able to reuse the virtual
mode function call wrappers, move them to drivers/firmware/efi/runtime-wrappers.c.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
The shared efistub code for ARM and arm64 contains a local copy of
linux_banner, allowing it to be referenced from separate executables
such as the ARM decompressor. However, this introduces a dependency on
generated header files, causing unnecessary rebuilds of the stub itself
and, in case of arm64, vmlinux which contains it.
On arm64, the copy is not actually needed since we can reference the
original symbol directly, and as it turns out, there may be better ways
to deal with this for ARM as well, so let's remove it from the shared
code. If it still needs to be reintroduced for ARM later, it should live
under arch/arm anyway and not in shared code.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
The shared efistub code for ARM and arm64 contains a local copy of
linux_banner, allowing it to be referenced from separate executables
such as the ARM decompressor. However, this introduces a dependency on
generated header files, causing unnecessary rebuilds of the stub itself
and, in case of arm64, vmlinux which contains it.
On arm64, the copy is not actually needed since we can reference the
original symbol directly, and as it turns out, there may be better ways
to deal with this for ARM as well, so let's remove it from the shared
code. If it still needs to be reintroduced for ARM later, it should live
under arch/arm anyway and not in shared code.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
In generic_id the long int timestamp is multiplied by 100000 and needs
an explicit cast to u64.
Without that the id in the resulting pstore filename is wrong and
userspace may have problems parsing it, but more importantly files in
pstore can never be deleted and may fill the EFI flash (brick device?).
This happens because when generic pstore code wants to delete a file,
it passes the id to the EFI backend which reinterpretes it and a wrong
variable name is attempted to be deleted. There's no error message but
after remounting pstore, deleted files would reappear.
Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Add trace interface to elaborate all H/W error related information.
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Some codes can be reorganzied as a common function for other usages.
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
This patch fixes a few compiler warning in the efi code for unused
variable, discarding const qualifier and wrong pointer type:
drivers/firmware/efi/fdt.c|66 col 22| warning: unused variable ‘name’ [-Wunused-variable]
drivers/firmware/efi/efi.c|368 col 3| warning: passing argument 3 of ‘of_get_flat_dt_prop’ from incompatible pointer type [enabled by default]
drivers/firmware/efi/efi.c|368 col 8| warning: assignment discards ‘const’ qualifier from pointer target type [enabled by default]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
The following commit has changed ACPICA table header definitions:
Commit: 88f074f487
Subject: ACPI, CPER: Update cper info
While such definitions are currently maintained in ACPICA. As the
modifications applying to the table definitions affect other OSPMs'
drivers, it is very difficult for ACPICA to initiate a process to
complete the merge. Thus this commit finally only leaves us divergences.
Revert such naming modifications to reduce the source code differecnes
between Linux and ACPICA upstream. No functional changes.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: Bob Moore <robert.moore@intel.com>
Cc: Chen, Gong <gong.chen@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull ARM64 EFI update from Peter Anvin:
"By agreement with the ARM64 EFI maintainers, we have agreed to make
-tip the upstream for all EFI patches. That is why this patchset
comes from me :)
This patchset enables EFI stub support for ARM64, like we already have
on x86"
* 'arm64-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arm64: efi: only attempt efi map setup if booting via EFI
efi/arm64: ignore dtb= when UEFI SecureBoot is enabled
doc: arm64: add description of EFI stub support
arm64: efi: add EFI stub
doc: arm: add UEFI support documentation
arm64: add EFI runtime services
efi: Add shared FDT related functions for ARM/ARM64
arm64: Add function to create identity mappings
efi: add helper function to get UEFI params from FDT
doc: efi-stub.txt updates for ARM
lib: add fdt_empty_tree.c
Pull x86 EFI updates from Peter Anvin:
"A collection of EFI changes. The perhaps most important one is to
fully save and restore the FPU state around each invocation of EFI
runtime, and to not choke on non-ASCII characters in the boot stub"
* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efivars: Add compatibility code for compat tasks
efivars: Refactor sanity checking code into separate function
efivars: Stop passing a struct argument to efivar_validate()
efivars: Check size of user object
efivars: Use local variables instead of a pointer dereference
x86/efi: Save and restore FPU context around efi_calls (i386)
x86/efi: Save and restore FPU context around efi_calls (x86_64)
x86/efi: Implement a __efi_call_virt macro
x86, fpu: Extend the use of static_cpu_has_safe
x86/efi: Delete most of the efi_call* macros
efi: x86: Handle arbitrary Unicode characters
efi: Add get_dram_base() helper function
efi: Add shared printk wrapper for consistent prefixing
efi: create memory map iteration helper
efi: efi-stub-helper cleanup
Search for Broadcom specific ibft sign "BIFT"
along with other possible values on UEFI
This patch is fix for regression introduced in
“935a9fee51c945b8942be2d7b4bae069167b4886”.
https://lkml.org/lkml/2011/12/16/353
This impacts Broadcom CNA for iSCSI Boot on UEFI platform.
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Mike Christie <michaelc@cs.wisc.edu>
Loading unauthenticated FDT blobs directly from storage is a security hazard,
so this should only be allowed when running with UEFI Secure Boot disabled.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
This patch adds PE/COFF header fields to the start of the kernel
Image so that it appears as an EFI application to UEFI firmware.
An EFI stub is included to allow direct booting of the kernel
Image.
Signed-off-by: Mark Salter <msalter@redhat.com>
[Add support in PE/COFF header for signed images]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Both ARM and ARM64 stubs will update the device tree that they pass to
the kernel. In both cases they primarily need to add the same UEFI
related information, so the function can be shared. Create a new FDT
related file for this to avoid use of architecture #ifdefs in
efi-stub-helper.c.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
[ Fixed memory node deletion code. ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Grant Likely <grant.likely@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
ARM and ARM64 architectures use the device tree to pass UEFI parameters
from stub to kernel. These parameters are things known to the stub but
not discoverable by the kernel after the stub calls ExitBootSerives().
There is a helper function in:
drivers/firmware/efi/fdt.c
which the stub uses to add the UEFI parameters to the device tree.
This patch adds a complimentary helper function which UEFI runtime
support may use to retrieve the parameters from the device tree.
If an architecture wants to use this helper, it should select
CONFIG_EFI_PARAMS_FROM_FDT.
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
It seems people are using 32-bit efibootmgr on top of 64-bit kernels,
which will currently fail horribly when using the efivars interface,
which is the traditional efibootmgr backend (the other being efivarfs).
Since there is no versioning info in the data structure, figure out when
we need to munge the structure data via judicious use of
is_compat_task().
Cc: Mike Waychison <mikew@google.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Move a large chunk of code that checks the validity of efi_variable into
a new function, because we'll also need to use it for the compat code.
Cc: Mike Waychison <mikew@google.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
In preparation for compat support, we can't assume that user variable
object is represented by a 'struct efi_variable'. Convert the validation
functions to take the variable name as an argument, which is the only
piece of the struct that was ever used anyway.
Cc: Mike Waychison <mikew@google.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Unbelieavably there are no checks to see whether the data structure
passed to 'new_var' and 'del_var' is the size that we expect. Let's add
some for better robustness.
Cc: Mike Waychison <mikew@google.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
In order to support a compat interface we need to stop passing pointers
to structures around, since the type of structure is going to depend on
whether the current task is a compat task.
Cc: Mike Waychison <mikew@google.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Instead of truncating UTF-16 assuming all characters is ASCII,
properly convert it to UTF-8.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
[ Bug and style fixes. ]
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Add the get_dram_base() function, shared by arm/arm64.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Add a wrapper for printk to standardize the prefix for informational and
error messages from the EFI stub.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
An #ifdef CONFIG_ARM clause in efi-stub-helper.c got included with some
of the generic stub rework by Roy Franz. Drop it here to make subsequent
patches less confusing.
Also, In handle_cmdline_files(), fh is not initialized, and while the
overall logic around this handling appears safe, gcc does not always
pick this up. Initialize to NULL to remove the resulting warning.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Pull x86 fixes from Peter Anvin:
"This is a collection of minor fixes for x86, plus the IRET information
leak fix (forbid the use of 16-bit segments in 64-bit mode)"
NOTE! We may have to relax the "forbid the use of 16-bit segments in
64-bit mode" part, since there may be people who still run and depend on
16-bit Windows binaries under Wine.
But I'm taking this in the current unconditional form for now to see who
(if anybody) screams bloody murder. Maybe nobody cares. And maybe
we'll have to update it with some kind of runtime enablement (like our
vm.mmap_min_addr tunable that people who run dosemu/qemu/wine already
need to tweak).
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels
efi: Pass correct file handle to efi_file_{read,close}
x86/efi: Correct EFI boot stub use of code32_start
x86/efi: Fix boot failure with EFI stub
x86/platform/hyperv: Handle VMBUS driver being a module
x86/apic: Reinstate error IRQ Pentium erratum 3AP workaround
x86, CMCI: Add proper detection of end of CMCI storms
firmware was reading random values from the stack because we were
passing a pointer to the wrong object type.
* Kernel corruption has been reported when booting with the EFI boot
stub which was tracked down to setting a bogus value for
bp->hdr.code32_start, resulting in corruption during relocation.
* Olivier Martin reported that the wrong file handles were being passed
to efi_file_(read|close), which works for x86 by luck due to the way
that the FAT driver is implemented, but doesn't work on ARM.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=rovT
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent
Pull EFI fixes from Matt Fleming:
"* Fix EFI boot regression introduced during the merge window where the
firmware was reading random values from the stack because we were
passing a pointer to the wrong object type.
* Kernel corruption has been reported when booting with the EFI boot
stub which was tracked down to setting a bogus value for
bp->hdr.code32_start, resulting in corruption during relocation.
* Olivier Martin reported that the wrong file handles were being passed
to efi_file_(read|close), which works for x86 by luck due to the way
that the FAT driver is implemented, but doesn't work on ARM."
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We're currently passing the file handle for the root file system to
efi_file_read() and efi_file_close(), instead of the file handle for the
file we wish to read/close.
While this has worked up until now, it seems that it has only been by
pure luck. Olivier explains,
"The issue is the UEFI Fat driver might return the same function for
'fh->read()' and 'h->read()'. While in our case it does not work with
a different implementation of EFI_SIMPLE_FILE_SYSTEM_PROTOCOL. In our
case, we return a different pointer when reading a directory and
reading a file."
Fixing this actually clears up the two functions because we can drop one
of the arguments, and instead only pass a file 'handle' argument.
Reported-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Olivier Martin <olivier.martin@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Here's the big driver core / sysfs update for 3.15-rc1.
Lots of kernfs updates to make it useful for other subsystems, and a few
other tiny driver core patches.
All have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEABECAAYFAlM7A0wACgkQMUfUDdst+ynJNACfZlY+KNKIhNFt1OOW8rQfSZzy
1PYAnjYuOoly01JlPrpJD5b4TdxaAq71
=GVUg
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and sysfs updates from Greg KH:
"Here's the big driver core / sysfs update for 3.15-rc1.
Lots of kernfs updates to make it useful for other subsystems, and a
few other tiny driver core patches.
All have been in linux-next for a while"
* tag 'driver-core-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (42 commits)
Revert "sysfs, driver-core: remove unused {sysfs|device}_schedule_callback_owner()"
kernfs: cache atomic_write_len in kernfs_open_file
numa: fix NULL pointer access and memory leak in unregister_one_node()
Revert "driver core: synchronize device shutdown"
kernfs: fix off by one error.
kernfs: remove duplicate dir.c at the top dir
x86: align x86 arch with generic CPU modalias handling
cpu: add generic support for CPU feature based module autoloading
sysfs: create bin_attributes under the requested group
driver core: unexport static function create_syslog_header
firmware: use power efficient workqueue for unloading and aborting fw load
firmware: give a protection when map page failed
firmware: google memconsole driver fixes
firmware: fix google/gsmi duplicate efivars_sysfs_init()
drivers/base: delete non-required instances of include <linux/init.h>
kernfs: fix kernfs_node_from_dentry()
ACPI / platform: drop redundant ACPI_HANDLE check
kernfs: fix hash calculation in kernfs_rename_ns()
kernfs: add CONFIG_KERNFS
sysfs, kobject: add sysfs wrapper for kernfs_enable_ns()
...
Pull x86 LTO changes from Peter Anvin:
"More infrastructure work in preparation for link-time optimization
(LTO). Most of these changes is to make sure symbols accessed from
assembly code are properly marked as visible so the linker doesn't
remove them.
My understanding is that the changes to support LTO are still not
upstream in binutils, but are on the way there. This patchset should
conclude the x86-specific changes, and remaining patches to actually
enable LTO will be fed through the Kbuild tree (other than keeping up
with changes to the x86 code base, of course), although not
necessarily in this merge window"
* 'x86-asmlinkage-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
Kbuild, lto: Handle basic LTO in modpost
Kbuild, lto: Disable LTO for asm-offsets.c
Kbuild, lto: Add a gcc-ld script to let run gcc as ld
Kbuild, lto: add ld-version and ld-ifversion macros
Kbuild, lto: Drop .number postfixes in modpost
Kbuild, lto, workaround: Don't warn for initcall_reference in modpost
lto: Disable LTO for sys_ni
lto: Handle LTO common symbols in module loader
lto, workaround: Add workaround for initcall reordering
lto: Make asmlinkage __visible
x86, lto: Disable LTO for the x86 VDSO
initconst, x86: Fix initconst mistake in ts5500 code
initconst: Fix initconst mistake in dcdbas
asmlinkage: Make trace_hardirqs_on/off_caller visible
asmlinkage, x86: Fix 32bit memcpy for LTO
asmlinkage Make __stack_chk_failed and memcmp visible
asmlinkage: Mark rwsem functions that can be called from assembler asmlinkage
asmlinkage: Make main_extable_sort_needed visible
asmlinkage, mutex: Mark __visible
asmlinkage: Make trace_hardirq visible
...
The ARM EFI boot stub doesn't need to care about the efi_early
infrastructure that x86 requires in order to do mixed mode thunking. So
wrap everything up in an efi_call_early() macro.
This allows x86 to do the necessary indirection jumps to call whatever
firmware interface is necessary (native or mixed mode), but also allows
the ARM folks to mask the fact that they don't support relocation in the
boot stub and need to pass 'sys_table_arg' to every function.
[ hpa: there are no object code changes from this patch ]
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/20140326091011.GB2958@console-pimps.org
Cc: Roy Franz <roy.franz@linaro.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
It's not possible to dereference the EFI System table directly when
booting a 64-bit kernel on a 32-bit EFI firmware because the size of
pointers don't match.
In preparation for supporting the above use case, build a list of
function pointers on boot so that callers don't have to worry about
converting pointer sizes through multiple levels of indirection.
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Fix following sparse warnings:
drivers/firmware/efi/efivars.c:230:66: warning:
Using plain integer as NULL pointer
drivers/firmware/efi/efi.c:236:27: warning:
Using plain integer as NULL pointer
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
It makes more sense to set the feature flag in the success path of the
detection function than it does to rely on the caller doing it. Apart
from it being more logical to group the code and data together, it sets
a much better example for new EFI architectures.
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
The google memconsole driver is currently broken upstream, as it tries
to read memory that is described as reserved in /proc/iomem, by
dereferencing a pointer obtained through phys_to_virt(). This triggers
a kernel fault as such regions are unmapped after early boot.
The proper workaround is to use ioremap_cache() / iounmap() around such
accesses.
As some unrelated changes, I also converted some printks to use pr_info()
and added some missing __init annotations.
Tested: booted dbg build, verified I could read /sys/firmware/log
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Mike Waychison <mikew@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Starting in commit e14ab23dde,
efivars_sysfs_init() is called both by itself as an init function,
and by drivers/firmware/google/gsmi.c gsmi_init().
This results in runtime warnings such as the following:
[ 5.651330] WARNING: at fs/sysfs/dir.c:530 sysfs_add_one+0xbd/0xe0()
[ 5.657699] sysfs: cannot create duplicate filename '/firmware/gsmi/vars'
Fixing this by removing the redundant efivars_sysfs_init() call in
gsmi_init().
Tested: booted, checked that /firmware/gsmi/vars was still present and
showed the expected contents.
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Matt Fleming <matt.fleming@intel.com>
Acked-by: Mike Waychison <mikew@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The GOOGLE_SMI Kconfig symbol depends on DMI and selects EFI. This
causes problems on other archs when introducing DMI support that depends
on EFI, as it results in a recursive dependency:
arch/arm/Kconfig:1845:error: recursive dependency detected!
arch/arm/Kconfig:1845: symbol DMI depends on EFI
Fix by changing the 'select EFI' to a 'depends on EFI'.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: David Rientjes <rientjes@google.com>
Acked-by: Mike Waychison <mikew@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- ACPI core changes to make it create a struct acpi_device object for every
device represented in the ACPI tables during all namespace scans regardless
of the current status of that device. In accordance with this, ACPI hotplug
operations will not delete those objects, unless the underlying ACPI tables
go away.
- On top of the above, new sysfs attribute for ACPI device objects allowing
user space to check device status by triggering the execution of _STA for
its ACPI object. From Srinivas Pandruvada.
- ACPI core hotplug changes reducing code duplication, integrating the
PCI root hotplug with the core and reworking container hotplug.
- ACPI core simplifications making it use ACPI_COMPANION() in the code
"glueing" ACPI device objects to "physical" devices.
- ACPICA update to upstream version 20131218. This adds support for the
DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug
facilities. From Bob Moore, Lv Zheng and Betty Dall.
- Init code change to carry out the early ACPI initialization earlier.
That should allow us to use ACPI during the timekeeping initialization
and possibly to simplify the EFI initialization too. From Chun-Yi Lee.
- Clenups of the inclusions of ACPI headers in many places all over from
Lv Zheng and Rashika Kheria (work in progress).
- New helper for ACPI _DSM execution and rework of the code in drivers
that uses _DSM to execute it via the new helper. From Jiang Liu.
- New Win8 OSI blacklist entries from Takashi Iwai.
- Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo,
Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria,
Tang Chen, Zhang Rui.
- intel_pstate driver updates, including proper Baytrail support, from
Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra.
- Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski.
- powernow-k6 cpufreq driver fixes from Mikulas Patocka.
- cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown.
- Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias,
Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar.
- cpuidle cleanups from Bartlomiej Zolnierkiewicz.
- Support for hibernation APM events from Bin Shi.
- Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled
during thaw transitions from Bjørn Mork.
- PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson.
- PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa,
Rashika Kheria.
- New tool for profiling system suspend from Todd E Brandt and a cpupower
tool cleanup from One Thousand Gnomes.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=dRf6
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
"As far as the number of commits goes, the top spot belongs to ACPI
this time with cpufreq in the second position and a handful of PM
core, PNP and cpuidle updates. They are fixes and cleanups mostly, as
usual, with a couple of new features in the mix.
The most visible change is probably that we will create struct
acpi_device objects (visible in sysfs) for all devices represented in
the ACPI tables regardless of their status and there will be a new
sysfs attribute under those objects allowing user space to check that
status via _STA.
Consequently, ACPI device eject or generally hot-removal will not
delete those objects, unless the table containing the corresponding
namespace nodes is unloaded, which is extremely rare. Also ACPI
container hotplug will be handled quite a bit differently and cpufreq
will support CPU boost ("turbo") generically and not only in the
acpi-cpufreq driver.
Specifics:
- ACPI core changes to make it create a struct acpi_device object for
every device represented in the ACPI tables during all namespace
scans regardless of the current status of that device. In
accordance with this, ACPI hotplug operations will not delete those
objects, unless the underlying ACPI tables go away.
- On top of the above, new sysfs attribute for ACPI device objects
allowing user space to check device status by triggering the
execution of _STA for its ACPI object. From Srinivas Pandruvada.
- ACPI core hotplug changes reducing code duplication, integrating
the PCI root hotplug with the core and reworking container hotplug.
- ACPI core simplifications making it use ACPI_COMPANION() in the
code "glueing" ACPI device objects to "physical" devices.
- ACPICA update to upstream version 20131218. This adds support for
the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves
debug facilities. From Bob Moore, Lv Zheng and Betty Dall.
- Init code change to carry out the early ACPI initialization
earlier. That should allow us to use ACPI during the timekeeping
initialization and possibly to simplify the EFI initialization too.
From Chun-Yi Lee.
- Clenups of the inclusions of ACPI headers in many places all over
from Lv Zheng and Rashika Kheria (work in progress).
- New helper for ACPI _DSM execution and rework of the code in
drivers that uses _DSM to execute it via the new helper. From
Jiang Liu.
- New Win8 OSI blacklist entries from Takashi Iwai.
- Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun
Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava,
Rashika Kheria, Tang Chen, Zhang Rui.
- intel_pstate driver updates, including proper Baytrail support,
from Dirk Brandewie and intel_pstate documentation from Ramkumar
Ramachandra.
- Generic CPU boost ("turbo") support for cpufreq from Lukasz
Majewski.
- powernow-k6 cpufreq driver fixes from Mikulas Patocka.
- cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark
Brown.
- Assorted cpufreq drivers fixes and cleanups from Anson Huang, John
Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh
Kumar.
- cpuidle cleanups from Bartlomiej Zolnierkiewicz.
- Support for hibernation APM events from Bin Shi.
- Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC
disabled during thaw transitions from Bjørn Mork.
- PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf
Hansson.
- PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente
Kurusa, Rashika Kheria.
- New tool for profiling system suspend from Todd E Brandt and a
cpupower tool cleanup from One Thousand Gnomes"
* tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits)
thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412)
cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ
Documentation: cpufreq / boost: Update BOOST documentation
cpufreq: exynos: Extend Exynos cpufreq driver to support boost
cpufreq / boost: Kconfig: Support for software-managed BOOST
acpi-cpufreq: Adjust the code to use the common boost attribute
cpufreq: Add boost frequency support in core
intel_pstate: Add trace point to report internal state.
cpufreq: introduce cpufreq_generic_get() routine
ARM: SA1100: Create dummy clk_get_rate() to avoid build failures
cpufreq: stats: create sysfs entries when cpufreq_stats is a module
cpufreq: stats: free table and remove sysfs entry in a single routine
cpufreq: stats: remove hotplug notifiers
cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly
cpufreq: speedstep: remove unused speedstep_get_state
platform: introduce OF style 'modalias' support for platform bus
PM / tools: new tool for suspend/resume performance optimization
ACPI: fix module autoloading for ACPI enumerated devices
ACPI: add module autoloading support for ACPI enumerated devices
ACPI: fix create_modalias() return value handling
...
This patch makes a couple of changes to the SMBIOS/DMI scanning
code so it can be used on other archs (such as ARM and arm64):
(a) wrap the calls to ioremap()/iounmap(), this allows the use of a
flavor of ioremap() more suitable for random unaligned access;
(b) allow the non-EFI fallback probe into hardcoded physical address
0xF0000 to be disabled.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Grant Likely <grant.likely@linaro.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Switch to memblock interfaces for early memory allocator instead of
bootmem allocator. No functional change in beahvior than what it is in
current code from bootmem users points of view.
Archs already converted to NO_BOOTMEM now directly use memblock
interfaces instead of bootmem wrappers build on top of memblock. And
the archs which still uses bootmem, these new apis just fallback to
exiting bootmem APIs.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here's the big driver core and sysfs patch set for 3.14-rc1.
There's a lot of work here moving sysfs logic out into a "kernfs" to
allow other subsystems to also have a virtual filesystem with the same
attributes of sysfs (handle device disconnect, dynamic creation /
removal as needed / unneeded, etc. This is primarily being done for
the cgroups filesystem, but the goal is to also move debugfs to it when
it is ready, solving all of the known issues in that filesystem as well.
The code isn't completed yet, but all should be stable now (there is a
big section that was reverted due to problems found when testing.)
There's also some other smaller fixes, and a driver core addition that
allows for a "collection" of objects, that the DRM people will be using
soon (it's in this tree to make merges after -rc1 easier.)
All of this has been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEABECAAYFAlLdh0cACgkQMUfUDdst+ylv4QCfeDKDgLo4LsaBIIrFSxLoH/c7
UUsAoMPRwA0h8wy+BQcJAg4H4J4maKj3
=0pc0
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core / sysfs patches from Greg KH:
"Here's the big driver core and sysfs patch set for 3.14-rc1.
There's a lot of work here moving sysfs logic out into a "kernfs" to
allow other subsystems to also have a virtual filesystem with the same
attributes of sysfs (handle device disconnect, dynamic creation /
removal as needed / unneeded, etc)
This is primarily being done for the cgroups filesystem, but the goal
is to also move debugfs to it when it is ready, solving all of the
known issues in that filesystem as well. The code isn't completed
yet, but all should be stable now (there is a big section that was
reverted due to problems found when testing)
There's also some other smaller fixes, and a driver core addition that
allows for a "collection" of objects, that the DRM people will be
using soon (it's in this tree to make merges after -rc1 easier)
All of this has been in linux-next with no reported issues"
* tag 'driver-core-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (113 commits)
kernfs: associate a new kernfs_node with its parent on creation
kernfs: add struct dentry declaration in kernfs.h
kernfs: fix get_active failure handling in kernfs_seq_*()
Revert "kernfs: fix get_active failure handling in kernfs_seq_*()"
Revert "kernfs: replace kernfs_node->u.completion with kernfs_root->deactivate_waitq"
Revert "kernfs: remove KERNFS_ACTIVE_REF and add kernfs_lockdep()"
Revert "kernfs: remove KERNFS_REMOVED"
Revert "kernfs: restructure removal path to fix possible premature return"
Revert "kernfs: invoke kernfs_unmap_bin_file() directly from __kernfs_remove()"
Revert "kernfs: remove kernfs_addrm_cxt"
Revert "kernfs: make kernfs_get_active() block if the node is deactivated but not removed"
Revert "kernfs: implement kernfs_{de|re}activate[_self]()"
Revert "kernfs, sysfs, driver-core: implement kernfs_remove_self() and its wrappers"
Revert "pci: use device_remove_file_self() instead of device_schedule_callback()"
Revert "scsi: use device_remove_file_self() instead of device_schedule_callback()"
Revert "s390: use device_remove_file_self() instead of device_schedule_callback()"
Revert "sysfs, driver-core: remove unused {sysfs|device}_schedule_callback_owner()"
Revert "kernfs: remove unnecessary NULL check in __kernfs_remove()"
kernfs: remove unnecessary NULL check in __kernfs_remove()
drivers/base: provide an infrastructure for componentised subsystems
...
* acpi-cleanup: (22 commits)
ACPI / tables: Return proper error codes from acpi_table_parse() and fix comment.
ACPI / tables: Check if id is NULL in acpi_table_parse()
ACPI / proc: Include appropriate header file in proc.c
ACPI / EC: Remove unused functions and add prototype declaration in internal.h
ACPI / dock: Include appropriate header file in dock.c
ACPI / PCI: Include appropriate header file in pci_link.c
ACPI / PCI: Include appropriate header file in pci_slot.c
ACPI / EC: Mark the function acpi_ec_add_debugfs() as static in ec_sys.c
ACPI / NVS: Include appropriate header file in nvs.c
ACPI / OSL: Mark the function acpi_table_checksum() as static
ACPI / processor: initialize a variable to silence compiler warning
ACPI / processor: use ACPI_COMPANION() to get ACPI device
ACPI: correct minor typos
ACPI / sleep: Drop redundant acpi_disabled check
ACPI / dock: Drop redundant acpi_disabled check
ACPI / table: Replace '1' with specific error return values
ACPI: remove trailing whitespace
ACPI / IBFT: Fix incorrect <acpi/acpi.h> inclusion in iSCSI boot firmware module
ACPI / i915: Fix incorrect <acpi/acpi.h> inclusions via <linux/acpi_io.h>
SFI / ACPI: Fix warnings reported during builds with W=1
...
Conflicts:
drivers/acpi/nvs.c
drivers/hwmon/asus_atk0110.c
Pull x86 fixes from Peter Anvin:
"There is a small EFI fix and a big power regression fix in this batch.
My queue also had a fix for downing a CPU when there are insufficient
number of IRQ vectors available, but I'm holding that one for now due
to recent bug reports"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Don't select EFI from certain special ACPI drivers
x86 idle: Repair large-server 50-watt idle-power regression
kexec kernel will need exactly same mapping for EFI runtime memory
ranges. Thus here export the runtime ranges mapping to sysfs,
kexec-tools will assemble them and pass to 2nd kernel via setup_data.
Introducing a new directory /sys/firmware/efi/runtime-map just like
/sys/firmware/memmap. Containing below attribute in each file of that
directory:
attribute num_pages phys_addr type virt_addr
Signed-off-by: Dave Young <dyoung@redhat.com>
Tested-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Export fw_vendor, runtime and config table physical addresses to
/sys/firmware/efi/{fw_vendor,runtime,config_table} because kexec kernels
need them.
From EFI spec these 3 variables will be updated to virtual address after
entering virtual mode. But kernel startup code will need the physical
address.
Signed-off-by: Dave Young <dyoung@redhat.com>
Tested-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Some pstore backing devices use on board flash as persistent
storage. These have limited numbers of write cycles so it
is a poor idea to use them from high frequency operations.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 7ea6c6c1 ("Move cper.c from drivers/acpi/apei to
drivers/firmware/efi") results in CONFIG_EFI being enabled even
when the user doesn't want this. Since ACPI APEI used to build
fine without UEFI (and as far as I know also has no functional
depency on it), at least in that case using a reverse dependency
is wrong (and a straight one isn't needed).
Whether the same is true for ACPI_EXTLOG I don't know - if there
is a functional dependency, it should depend on EFI rather than
selecting it. It certainly has (currently) no build dependency.
Adjust Kconfig and build logic so that the bad dependency gets
avoided.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/52AF1EBC020000780010DBF9@nat28.tlf.novell.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
a8b1474442 ("sysfs: give different locking key to regular and bin
files") in driver-core-linus modifies sysfs_open_file() so that it
gives out different locking classes to sysfs_open_files depending on
whether the file is bin or not. Due to the massive kernfs
reorganization in driver-core-next, this naturally causes merge
conflict in fs/sysfs/file.c.
Due to the way things are split between kernfs and sysfs in
driver-core-next, the same fix can't easily be applied to
driver-core-next. This merge simply ignores the offending commit. A
following patch will implement a separate fix for the issue.
Signed-off-by: Tejun Heo <tj@kernel.org>
With CONFIG_DEBUG_KOBJECT_RELEASE=y, removing and immediately reloading the
dmi-sysfs module causes the following warning:
sysfs: cannot create duplicate filename '/firmware/dmi'
kobject_add_internal failed for dmi with -EEXIST, don't try to register things with the same name in the same directory.
The "dmi" directory stays in sysfs until the dmi_kobj is released, and
DEBUG_KOBJECT_RELEASE delays that.
I don't think we can hit this problem in normal usage because dmi_kobj is
static and nothing outside dmi-sysfs can get a reference to it, so the
only way to delay the "dmi" release is with DEBUG_KOBJECT_RELEASE.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removing the dmi-sysfs module causes the following warning:
# modprobe -r dmi_sysfs
WARNING: CPU: 11 PID: 6785 at fs/sysfs/inode.c:325 sysfs_hash_and_remove+0xa9/0xb0()
sysfs: can not remove 'raw', no directory
This is because putting the entry kobject, e.g., for
"/sys/firmware/dmi/entries/19-0", removes the directory and all its
contents. By the time dmi_sysfs_entry_release() runs, the "raw" file
inside ".../19-0/" has already been removed.
Therefore, we don't need to remove the "raw" bin file at all in
dmi_sysfs_entry_release().
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To avoid build problems and breaking dependencies between ACPI header
files, <acpi/acpi.h> should not be included directly by code outside
of the ACPI core subsystem, but this is done by the ACPI iSCSI
Boot Firmware code.
The iBFT specification doesn't mention whether or not it can appear
on a non-ACPI platform, but is says that ACPI 3.0b defines the
mechanism. The current CONFIG_ISCSI_IBFT_FIND code doesn't use the
ACPI tables API to locate the table, so it doesn't rely on CONFIG_ACPI
directly.
However, since iBFT is is an ACPI-based mechanism (please refer to
the documentation link below for more information), it should be
correct to make CONFIG_ISCSI_IBFT_FIND depend on CONFIG_ACPI (even
though the table location can be implemented without using ACPI
tables API).
After that change, include/linux/iscsi_ibft.h can be modified to
include <linux/acpi.h> instead of <acpi/acpi.h> as appropriate.
References: http://www.microsoft.com/whdc/system/platform/firmware/ibft.mspx
Cc: Konrad Rzeszutek Wilk <konrad@kernel.org>
Cc: Peter Jones <pjones@redhat.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
[rjw: Subject and changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pstore fs expects that backends provide a unique id which could avoid
pstore making entries as duplication or denominating entries the same
name. So I combine the timestamp, part and count into id.
Signed-off-by: Madper Xie <cxie@redhat.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: stable@vger.kernel.org
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Currently, when mounting pstore file system, a read callback of
efi_pstore driver runs mutiple times as below.
- In the first read callback, scan efivar_sysfs_list from head and pass
a kmsg buffer of a entry to an upper pstore layer.
- In the second read callback, rescan efivar_sysfs_list from the entry
and pass another kmsg buffer to it.
- Repeat the scan and pass until the end of efivar_sysfs_list.
In this process, an entry is read across the multiple read function
calls. To avoid race between the read and erasion, the whole process
above is protected by a spinlock, holding in open() and releasing in
close().
At the same time, kmemdup() is called to pass the buffer to pstore
filesystem during it. And then, it causes a following lockdep warning.
To make the dynamic memory allocation runnable without taking spinlock,
holding off a deletion of sysfs entry if it happens while scanning it
via efi_pstore, and deleting it after the scan is completed.
To implement it, this patch introduces two flags, scanning and deleting,
to efivar_entry.
On the code basis, it seems that all the scanning and deleting logic is
not needed because __efivars->lock are not dropped when reading from the
EFI variable store.
But, the scanning and deleting logic is still needed because an
efi-pstore and a pstore filesystem works as follows.
In case an entry(A) is found, the pointer is saved to psi->data. And
efi_pstore_read() passes the entry(A) to a pstore filesystem by
releasing __efivars->lock.
And then, the pstore filesystem calls efi_pstore_read() again and the
same entry(A), which is saved to psi->data, is used for resuming to scan
a sysfs-list.
So, to protect the entry(A), the logic is needed.
[ 1.143710] ------------[ cut here ]------------
[ 1.144058] WARNING: CPU: 1 PID: 1 at kernel/lockdep.c:2740 lockdep_trace_alloc+0x104/0x110()
[ 1.144058] DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags))
[ 1.144058] Modules linked in:
[ 1.144058] CPU: 1 PID: 1 Comm: systemd Not tainted 3.11.0-rc5 #2
[ 1.144058] 0000000000000009 ffff8800797e9ae0 ffffffff816614a5 ffff8800797e9b28
[ 1.144058] ffff8800797e9b18 ffffffff8105510d 0000000000000080 0000000000000046
[ 1.144058] 00000000000000d0 00000000000003af ffffffff81ccd0c0 ffff8800797e9b78
[ 1.144058] Call Trace:
[ 1.144058] [<ffffffff816614a5>] dump_stack+0x54/0x74
[ 1.144058] [<ffffffff8105510d>] warn_slowpath_common+0x7d/0xa0
[ 1.144058] [<ffffffff8105517c>] warn_slowpath_fmt+0x4c/0x50
[ 1.144058] [<ffffffff8131290f>] ? vsscanf+0x57f/0x7b0
[ 1.144058] [<ffffffff810bbd74>] lockdep_trace_alloc+0x104/0x110
[ 1.144058] [<ffffffff81192da0>] __kmalloc_track_caller+0x50/0x280
[ 1.144058] [<ffffffff815147bb>] ? efi_pstore_read_func.part.1+0x12b/0x170
[ 1.144058] [<ffffffff8115b260>] kmemdup+0x20/0x50
[ 1.144058] [<ffffffff815147bb>] efi_pstore_read_func.part.1+0x12b/0x170
[ 1.144058] [<ffffffff81514800>] ? efi_pstore_read_func.part.1+0x170/0x170
[ 1.144058] [<ffffffff815148b4>] efi_pstore_read_func+0xb4/0xe0
[ 1.144058] [<ffffffff81512b7b>] __efivar_entry_iter+0xfb/0x120
[ 1.144058] [<ffffffff8151428f>] efi_pstore_read+0x3f/0x50
[ 1.144058] [<ffffffff8128d7ba>] pstore_get_records+0x9a/0x150
[ 1.158207] [<ffffffff812af25c>] ? selinux_d_instantiate+0x1c/0x20
[ 1.158207] [<ffffffff8128ce30>] ? parse_options+0x80/0x80
[ 1.158207] [<ffffffff8128ced5>] pstore_fill_super+0xa5/0xc0
[ 1.158207] [<ffffffff811ae7d2>] mount_single+0xa2/0xd0
[ 1.158207] [<ffffffff8128ccf8>] pstore_mount+0x18/0x20
[ 1.158207] [<ffffffff811ae8b9>] mount_fs+0x39/0x1b0
[ 1.158207] [<ffffffff81160550>] ? __alloc_percpu+0x10/0x20
[ 1.158207] [<ffffffff811c9493>] vfs_kern_mount+0x63/0xf0
[ 1.158207] [<ffffffff811cbb0e>] do_mount+0x23e/0xa20
[ 1.158207] [<ffffffff8115b51b>] ? strndup_user+0x4b/0xf0
[ 1.158207] [<ffffffff811cc373>] SyS_mount+0x83/0xc0
[ 1.158207] [<ffffffff81673cc2>] system_call_fastpath+0x16/0x1b
[ 1.158207] ---[ end trace 61981bc62de9f6f4 ]---
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Tested-by: Madper Xie <cxie@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Pull DMA mask updates from Russell King:
"This series cleans up the handling of DMA masks in a lot of drivers,
fixing some bugs as we go.
Some of the more serious errors include:
- drivers which only set their coherent DMA mask if the attempt to
set the streaming mask fails.
- drivers which test for a NULL dma mask pointer, and then set the
dma mask pointer to a location in their module .data section -
which will cause problems if the module is reloaded.
To counter these, I have introduced two helper functions:
- dma_set_mask_and_coherent() takes care of setting both the
streaming and coherent masks at the same time, with the correct
error handling as specified by the API.
- dma_coerce_mask_and_coherent() which resolves the problem of
drivers forcefully setting DMA masks. This is more a marker for
future work to further clean these locations up - the code which
creates the devices really should be initialising these, but to fix
that in one go along with this change could potentially be very
disruptive.
The last thing this series does is prise away some of Linux's addition
to "DMA addresses are physical addresses and RAM always starts at
zero". We have ARM LPAE systems where all system memory is above 4GB
physical, hence having DMA masks interpreted by (eg) the block layers
as describing physical addresses in the range 0..DMAMASK fails on
these platforms. Santosh Shilimkar addresses this in this series; the
patches were copied to the appropriate people multiple times but were
ignored.
Fixing this also gets rid of some ARM weirdness in the setup of the
max*pfn variables, and brings ARM into line with every other Linux
architecture as far as those go"
* 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-arm: (52 commits)
ARM: 7805/1: mm: change max*pfn to include the physical offset of memory
ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations
ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations
ARM: 7795/1: mm: dma-mapping: Add dma_max_pfn(dev) helper function
ARM: 7794/1: block: Rename parameter dma_mask to max_addr for blk_queue_bounce_limit()
ARM: DMA-API: better handing of DMA masks for coherent allocations
ARM: 7857/1: dma: imx-sdma: setup dma mask
DMA-API: firmware/google/gsmi.c: avoid direct access to DMA masks
DMA-API: dcdbas: update DMA mask handing
DMA-API: dma: edma.c: no need to explicitly initialize DMA masks
DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks
DMA-API: crypto: remove last references to 'static struct device *dev'
DMA-API: crypto: fix ixp4xx crypto platform device support
DMA-API: others: use dma_set_coherent_mask()
DMA-API: staging: use dma_set_coherent_mask()
DMA-API: usb: use new dma_coerce_mask_and_coherent()
DMA-API: usb: use dma_set_coherent_mask()
DMA-API: parport: parport_pc.c: use dma_coerce_mask_and_coherent()
DMA-API: net: octeon: use dma_coerce_mask_and_coherent()
DMA-API: net: nxp/lpc_eth: use dma_coerce_mask_and_coherent()
...
Pull x86 RAS changes from Ingo Molnar:
"The biggest change adds support for Intel 'CPER' (UEFI Common Platform
Error Record) error logging, which builds upon an enhanced error
logging mechanism available on Xeon processors.
Full description is here:
http://www.intel.com/content/www/us/en/architecture-and-technology/enhanced-mca-logging-xeon-paper.html
This change provides a module (and support code) to check for an
extended error log and prints extra details about the error on the
console"
* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ACPI, x86: Fix extended error log driver to depend on CONFIG_X86_LOCAL_APIC
dmi: Avoid unaligned memory access in save_mem_devices()
Move cper.c from drivers/acpi/apei to drivers/firmware/efi
EDAC, GHES: Update ghes error record info
ACPI, APEI, CPER: Cleanup CPER memory error output format
ACPI, APEI, CPER: Enhance memory reporting capability
ACPI, APEI, CPER: Add UEFI 2.4 support for memory error
DMI: Parse memory device (type 17) in SMBIOS
ACPI, x86: Extended error log driver for x86 platform
bitops: Introduce a more generic BITMASK macro
ACPI, CPER: Update cper info
ACPI, APEI, CPER: Fix status check during error printing
Pull x86 EFI changes from Ingo Molnar:
"Main changes:
- Add support for earlyprintk=efi which uses the EFI framebuffer.
Very useful for debugging boot problems.
- EFI stub support for large memory maps (more than 128 entries)
- EFI ARM support - this was mostly done by generalizing x86 <-> ARM
platform differences, such as by moving x86 EFI code into
drivers/firmware/efi/ and sharing it with ARM.
- Documentation updates
- misc fixes"
* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits)
x86/efi: Add EFI framebuffer earlyprintk support
boot, efi: Remove redundant memset()
x86/efi: Fix config_table_type array termination
x86 efi: bugfix interrupt disabling sequence
x86: EFI stub support for large memory maps
efi: resolve warnings found on ARM compile
efi: Fix types in EFI calls to match EFI function definitions.
efi: Renames in handle_cmdline_files() to complete generalization.
efi: Generalize handle_ramdisks() and rename to handle_cmdline_files().
efi: Allow efi_free() to be called with size of 0
efi: use efi_get_memory_map() to get final map for x86
efi: generalize efi_get_memory_map()
efi: Rename __get_map() to efi_get_memory_map()
efi: Move unicode to ASCII conversion to shared function.
efi: Generalize relocate_kernel() for use by other architectures.
efi: Move relocate_kernel() to shared file.
efi: Enforce minimum alignment of 1 page on allocations.
efi: Rename memory allocation/free functions
efi: Add system table pointer argument to shared functions.
efi: Move common EFI stub code from x86 arch code to common location
...
Firmware is not required to maintain alignment of SMBIOS
entries, so we should take care accessing fields within these
structures. Use "get_unaligned()" to avoid problems.
[ Found on ia64 (which grumbles about unaligned access) ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: Chen Gong <gong.chen@linux.intel.com>
Link: http://lkml.kernel.org/r/27d82dbff5be1025bf18ab88498632d36c2fcf3c.1383331440.git.tony.luck@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
cper.c contains code to decode and print "Common Platform Error Records".
Originally added under drivers/acpi/apei because the only user was in that
same directory - but now we have another consumer, and we shouldn't have
to force CONFIG_ACPI_APEI get access to this code.
Since CPER is defined in the UEFI specification - the logical home for
this code is under drivers/firmware/efi/
Acked-by: Matt Fleming <matt.fleming@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
This driver doesn't need to directly access DMA masks if it uses the
platform_device_register_full() API rather than
platform_device_register_simple() - the former function can initialize
the DMA mask appropriately.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
dcdbas was explicitly initializing DMA masks thusly:
dcdbas_pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
dcdbas_pdev->dev.dma_mask = &dcdbas_pdev->dev.coherent_dma_mask;
which bypasses the architecture check. Moreover, it is creating the
dcdbas_pdev device itself, and using the platform_device_register_full()
avoids some of this explicit initialization.
Convert the driver to use platform_device_register_full(), and as it
makes use of coherent DMA, also call dma_set_coherent_mask() to ensure
that the architecture gets to check the mask.
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This patch adds a new interface to decode memory device (type 17)
to help error reporting on DIMMs.
Original-author: Tony Luck <tony.luck@intel.com>
Signed-off-by: Chen, Gong <gong.chen@linux.intel.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Remove a redundant memset() call from efi_relocate_kernel() that
was clearing memory that would be used by BSS in non-compressed
images loaded with this function. This clear was redundant with
the clearing done in the image itself, and also implemented incorrectly
with a 0 length.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Acked-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
warnings from gcc:
warning: label 'free_pool' defined but not used [-Wunused-label]
warning: value computed is not used [-Wunused-value]
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
EFI calls can made directly on ARM, so the function pointers
are directly invoked. This allows types to be checked at
compile time, so here we ensure that the parameters match
the function signature. The wrappers used by x86 prevent
any type checking.
Correct the type of chunksize to be based on native
width as specified by the EFI_FILE_PROTOCOL read()
function.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Rename variables to be not initrd specific, as now the function
loads arbitrary files. This change is exclusively renames
and comment changes to reflect the generalization.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Acked-by: Mark Salter <msalter@redhat.com>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
The handle_cmdline_files now takes the option to handle as a string,
and returns the loaded data through parameters, rather than taking
an x86 specific setup_header structure. For ARM, this will be used
to load a device tree blob in addition to initrd images.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Acked-by: Mark Salter <msalter@redhat.com>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Make efi_free() safely callable with size of 0, similar to free() being
callable with NULL pointers, and do nothing in that case.
Remove size checks that this makes redundant. This also avoids some
size checks in the ARM EFI stub code that will be added as well.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Add arguments for returning the descriptor version and also
the memory map key. The key is required for calling
exit_boot_services().
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Rename function in preparation for making it more flexible
and sharing it.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Move the open-coded conversion to a shared function for
use by all architectures. Change the allocation to prefer
a high address for ARM, as this is required to avoid conflicts
with reserved regions in low memory. We don't know the specifics
of these regions until after we process the command line and
device tree.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Rename relocate_kernel() to efi_relocate_kernel(), and take
parameters rather than x86 specific structure. Add max_addr
argument as for ARM we have some address constraints that we
need to enforce when relocating the kernel. Add alloc_size
parameter for use by ARM64 which uses an uncompressed kernel,
and needs to allocate space for BSS.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
The relocate_kernel() function will be generalized and used
by all architectures, as they all have similar requirements.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
The efi_high_alloc() and efi_low_alloc() functions
use the EFI_ALLOCATE_ADDRESS option to the EFI
function allocate_pages(), which requires a minimum
of page alignment, and rejects all other requests.
The existing code could fail to allocate depending
on allocation size, as although repeated allocation
attempts were made, none were guaranteed to be page
aligned.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Acked-by: Mark Salter <msalter@redhat.com>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Rename them to be more similar, as low_free() could be used to free
memory allocated by both high_alloc() and low_alloc().
high_alloc() -> efi_high_alloc()
low_alloc() -> efi_low_alloc()
low_free() -> efi_free()
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Acked-by: Mark Salter <msalter@redhat.com>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Add system table pointer argument to shared EFI stub related functions
so they no longer use a global system table pointer as they did when part
of eboot.c. For the ARM EFI stub this allows us to avoid global
variables completely and thereby not have to deal with GOT fixups.
Not having the EFI stub fixup its GOT, which is shared with the
decompressor, simplifies the relocating of the zImage to a
bootable address.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
No code changes made, just moving functions and #define from x86 arch
directory to common location. Code is shared using #include, similar
to how decompression code is shared among architectures.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Acked-by: Mark Salter <msalter@redhat.com>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Peter Hurley