Commit Graph

18 Commits

Author SHA1 Message Date
Arkadiusz Mi?kiewicz 6743099ce5 xfs: Extend project quotas to support 32bit project ids
This patch adds support for 32bit project quota identifiers.

On disk format is backward compatible with 16bit projid numbers. projid
on disk is now kept in two 16bit values - di_projid_lo (which holds the
same position as old 16bit projid value) and new di_projid_hi (takes
existing padding) and converts from/to 32bit value on the fly.

xfs_admin (for existing fs), mkfs.xfs (for new fs) needs to be used
to enable PROJID32BIT support.

Signed-off-by: Arkadiusz Miśkiewicz <arekm@maven.pl>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
2010-10-18 15:08:08 -05:00
Christoph Hellwig 6447c36209 xfs: remove m_litino
With the upcoming v3 inodes the inode data/attr area size needs to be
calculated for each specific inode, so we can't cache it in the superblock
anymore.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-03-29 09:51:14 +02:00
Christoph Hellwig 51ce16d519 [XFS] kill XFS_DINODE_VERSION_ defines
These names don't add any value at all over just using the numerical
values.

(First sent on October 9th)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
2008-12-01 11:37:42 +11:00
Christoph Hellwig 81591fe2db [XFS] kill xfs_dinode_core_t
Now that we have a separate xfs_icdinode_t for the in-core inode which
gets logged there is no need anymore for the xfs_dinode vs xfs_dinode_core
split - the fact that part of the structure gets logged through the inode
log item and a small part not can better be described in a comment.

All sizeof operations on the dinode_core either really wanted the
icdinode and are switched to that one, or had already added the size
of the agi unlinked list pointer.  Later both will be replaced with
helpers once we get the larger CRC-enabled dinode.

Removing the data and attribute fork unions also has the advantage that
xfs_dinode.h doesn't need to pull in every header under the sun.

While we're at it also add some more comments describing the dinode
structure.

(First sent on October 7th)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
2008-12-01 11:37:35 +11:00
Christoph Hellwig d42f08f61c [XFS] kill xfs_ialloc_log_di
xfs_ialloc_log_di is only used to log the full inode core + di_next_unlinked.
That means all the offset magic is not nessecary and we can simply use
xfs_trans_log_buf directly.  Also add a comment describing what we should do
here instead.

(First sent on October 7th)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
2008-12-01 11:37:31 +11:00
Christoph Hellwig 7cc95a821d [XFS] Always use struct xfs_btree_block instead of short / longform
structures.

Always use the generic xfs_btree_block type instead of the short / long
structures. Add XFS_BTREE_SBLOCK_LEN / XFS_BTREE_LBLOCK_LEN defines for
the length of a short / long form block. The rationale for this is that we
will grow more btree block header variants to support CRCs and other RAS
information, and always accessing them through the same datatype with
unions for the short / long form pointers makes implementing this much
easier.

SGI-PV: 988146

SGI-Modid: xfs-linux-melb:xfs-kern:32300a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-10-30 17:14:34 +11:00
Christoph Hellwig 60197e8df3 [XFS] Cleanup maxrecs calculation.
Clean up the way the maximum and minimum records for the btree blocks are
calculated. For the alloc and inobt btrees all the values are
pre-calculated in xfs_mount_common, and we switch the current loop around
the ugly generic macros that use cpp token pasting to generate type names
to two small helpers in normal C code. For the bmbt and bmdr trees these
helpers also exist, but can be called during runtime, too. Here we also
kill various macros dealing with them and inline the logic into the
get_minrecs / get_maxrecs / get_dmaxrecs methods in xfs_bmap_btree.c.

Note that all these new helpers take an xfs_mount * argument which will be
needed to determine the size of a btree block once we add support for
extended btree blocks with CRCs and other RAS information.

SGI-PV: 988146

SGI-Modid: xfs-linux-melb:xfs-kern:32292a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-10-30 17:11:19 +11:00
Christoph Hellwig 45ba598e56 [XFS] Remove CFORK macros and use code directly in IFORK and DFORK macros.
Currently XFS_IFORK_* and XFS_DFORK* are implemented by means of
XFS_CFORK* macros. But given that XFS_IFORK_* operates on an xfs_inode
that embedds and xfs_icdinode_core and XFS_DFORK_* operates on an
xfs_dinode that embedds a xfs_dinode_core one will have to do endian
swapping while the other doesn't. Instead of having the current mess with
the CFORK macros that have byteswapping and non-byteswapping version
(which are inconsistantly named while we're at it) just define each family
of the macros to stand by itself and simplify the whole matter.

A few direct references to the CFORK variants were cleaned up to use IFORK
or DFORK to make this possible.

SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30163a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07 18:19:24 +11:00
Eric Sandeen 71ddabb94a [XFS] optimize XFS_IS_REALTIME_INODE w/o realtime config
Use XFS_IS_REALTIME_INODE in more places, and #define it to 0 if
CONFIG_XFS_RT is off. This should be safe because mount checks in
xfs_rtmount_init:

so if we get mounted w/o CONFIG_XFS_RT, no realtime inodes should be
encountered after that.

Defining XFS_IS_REALTIME_INODE to 0 saves a bit of stack space,
presumeably gcc can optimize around the various "if (0)" type checks:

xfs_alloc_file_space -8 xfs_bmap_adjacent -16 xfs_bmapi -8
xfs_bmap_rtalloc -16 xfs_bunmapi -28 xfs_free_file_space -64 xfs_imap +8
<-- ? hmm. xfs_iomap_write_direct -12 xfs_qm_dqusage_adjust -4
xfs_qm_vop_chown_reserve -4

SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:30014a

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-02-07 18:16:43 +11:00
Christoph Hellwig 347d1c0195 [XFS] dinode endianess annotations
Biggest bit is duplicating the dinode structure so we have one annotated for
native endianess and one for disk endianess. The other significant change
is that xfs_xlate_dinode_core is split into one helper per direction to
allow for proper annotations, everything else is trivial.

As a sidenode splitting out the incore dinode means we can move it into
xfs_inode.h in a later patch and severely improving on the include hell in
xfs.

SGI-PV: 968563
SGI-Modid: xfs-linux-melb:xfs-kern:29476a

Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-10-15 16:48:30 +10:00
David Chinner 2a82b8be8a [XFS] Concurrent Multi-File Data Streams
In media spaces, video is often stored in a frame-per-file format. When
dealing with uncompressed realtime HD video streams in this format, it is
crucial that files do not get fragmented and that multiple files a placed
contiguously on disk.

When multiple streams are being ingested and played out at the same time,
it is critical that the filesystem does not cross the streams and
interleave them together as this creates seek and readahead cache miss
latency and prevents both ingest and playout from meeting frame rate
targets.

This patch set creates a "stream of files" concept into the allocator to
place all the data from a single stream contiguously on disk so that RAID
array readahead can be used effectively. Each additional stream gets
placed in different allocation groups within the filesystem, thereby
ensuring that we don't cross any streams. When an AG fills up, we select a
new AG for the stream that is not in use.

The core of the functionality is the stream tracking - each inode that we
create in a directory needs to be associated with the directories' stream.
Hence every time we create a file, we look up the directories' stream
object and associate the new file with that object.

Once we have a stream object for a file, we use the AG that the stream
object point to for allocations. If we can't allocate in that AG (e.g. it
is full) we move the entire stream to another AG. Other inodes in the same
stream are moved to the new AG on their next allocation (i.e. lazy
update).

Stream objects are kept in a cache and hold a reference on the inode.
Hence the inode cannot be reclaimed while there is an outstanding stream
reference. This means that on unlink we need to remove the stream
association and we also need to flush all the associations on certain
events that want to reclaim all unreferenced inodes (e.g. filesystem
freeze).

SGI-PV: 964469
SGI-Modid: xfs-linux-melb:xfs-kern:29096a

Signed-off-by: David Chinner <dgc@sgi.com>
Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Tim Shimmin <tes@sgi.com>
Signed-off-by: Vlad Apostolov <vapo@sgi.com>
2007-07-14 15:40:53 +10:00
Nathan Scott f6c2d1fa63 [XFS] Remove version 1 directory code. Never functioned on Linux, just
pure bloat.

SGI-PV: 952969
SGI-Modid: xfs-linux-melb:xfs-kern:26251a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-20 13:04:51 +10:00
Barry Naujok d3446eac3f [XFS] Add degframentation exclusion support
SGI-PV: 953061
SGI-Modid: xfs-linux-melb:xfs-kern:25986a

Signed-off-by: Barry Naujok <bnaujok@sgi.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-06-09 14:54:19 +10:00
Nathan Scott 3ddb8fa98c [XFS] Sort out cosmetic differences between user and kernel copies of some
sources.

SGI-PV: 907752
SGI-Modid: xfs-linux-melb:xfs-kern:24659a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-01-11 15:33:02 +11:00
Nathan Scott dd9f438e32 [XFS] Implement the di_extsize allocator hint for non-realtime files as
well.  Also provides a mechanism for inheriting this property from the
parent directory for new files.

SGI-PV: 945264
SGI-Modid: xfs-linux-melb:xfs-kern:24367a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-01-11 15:28:28 +11:00
Nathan Scott 7b71876980 [XFS] Update license/copyright notices to match the prefered SGI
boilerplate.

SGI-PV: 913862
SGI-Modid: xfs-linux:xfs-kern:23903a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 14:58:39 +11:00
Nathan Scott a844f4510d [XFS] Remove xfs_macros.c, xfs_macros.h, rework headers a whole lot.
SGI-PV: 943122
SGI-Modid: xfs-linux:xfs-kern:23901a

Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 14:38:42 +11:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00