Commit Graph

24 Commits

Author SHA1 Message Date
Guo-Fu Tseng c906041412 jme: Advance driver version
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13 21:44:44 -08:00
Guo-Fu Tseng 8b53abae58 jme: Refill receive unicase MAC addr after resume
The value of the register which holds receive Unicast MAC Address
sometimes get messed-up after resume.
This patch refill it before enabling the hardware filter.

Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13 20:43:23 -08:00
Guo-Fu Tseng 854a2e7c33 jme: Safer MAC processor reset sequence
Adding control to clk_rx, and makes the control of clk_{rx|tx|tcp}
with safer sequence.
This sequence is provided by JMicron.

Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13 20:43:22 -08:00
Guo-Fu Tseng 3903c02357 jme: Fix hardware action of full-duplex
Clear Transmit Timer/Retry setting while full-duplex.

Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13 20:43:22 -08:00
Guo-Fu Tseng 3c2368d96f jme: Fix bit typo of JMC250A2 workaround
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13 20:43:21 -08:00
Guo-Fu Tseng 4872b11fdb jme: PHY Power control for new chip
After main chip rev 5, the hardware support more power saving
control registers.
Some Non-Linux drivers might turn off the phy power with new
interfaces, this patch makes it possible for Linux to turn it
on again.

Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13 20:43:20 -08:00
Guo-Fu Tseng 19d96017d1 jme: Extract main and sub chip revision
Get the main and sub chip revision for later workaround use.

Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-13 20:43:20 -08:00
Guo-Fu Tseng e47dfcd81e jme: Advance version number
Advance version number and update copyright info

Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21 03:52:11 -07:00
Joe Perches 49d70c4856 drivers/net/jme: Use pr_<level>
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Convert jeprintk to pr_err
Remove jeprintk macro define
Remove periods from end of logging messages
Coalesce format strings

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-06 18:29:19 -07:00
Guo-Fu Tseng 54d259d474 jme: Advance driver version number
Advance driver version number after some bug fix.

Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18 21:14:00 -07:00
Joe Perches f8502ce4f9 drivers/net/jme: Use netif_printk helpers
Convert uses of msg_<type> to netif_<level>(
Remove msg_<type> macros

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12 13:27:46 -08:00
Guo-Fu Tseng f77139c07a jme: Advance driver version number
Advance driver version number after modifications.

Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-06 13:05:13 -07:00
Guo-Fu Tseng d1dfa1d1de jme: Remove shadow register support
The hardware failed to update the shadow register in several cases.
It's known to be failed at 64bit box with more than 4G RAM.
In order to make the device working stable, give up using the shadow
register feature.

Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-06 13:05:07 -07:00
Guo-Fu Tseng 47bd10d14b jme: Change bufinf memory location
Instead of using a large chunk of memory space preserved for
for modules, using kmalloc to obtain the needed memory.

Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-06 13:05:06 -07:00
Guo-Fu Tseng 44d8d2e9f0 jme: Fix typo
Fix enum typo in jme.h

Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-06 13:05:02 -07:00
Guo-Fu Tseng 79cb5def8d jme: Advance version number after previous changes
From: Guo-Fu Tseng <cooldavid@cooldavid.org>

Advance version number after previous changes.
Sorry for not come along with previous patch series.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-02 01:55:15 -08:00
Ben Hutchings 288379f050 net: Remove redundant NAPI functions
Following the removal of the unused struct net_device * parameter from
the NAPI functions named *netif_rx_* in commit 908a7a1, they are
exactly equivalent to the corresponding *napi_* functions and are
therefore redundant.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21 14:33:50 -08:00
David S. Miller 6332178d91 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:

	drivers/net/ppp_generic.c
2008-12-23 17:56:23 -08:00
Neil Horman 908a7a16b8 net: Remove unused netdev arg from some NAPI interfaces.
When the napi api was changed to separate its 1:1 binding to the net_device
struct, the netif_rx_[prep|schedule|complete] api failed to remove the now
vestigual net_device structure parameter.  This patch cleans up that api by
properly removing it..

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-22 20:43:12 -08:00
cwm97m 2fccd2814f jme: Fixed a typo
Found a typo.

Signed-off-by: Wei-Min Chen <cwm97m@cse.nsysu.edu.tw>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17 00:26:37 -08:00
akeemting 4f40bf4689 jme: GHC register control fix for new hardware
Due to the hardware design, except the first chip on the market,
other chips needs to setup the clock source for MAC processor
implicitly through Global Host Control Register(GHC).
(Strange design huh?)

10/100M uses the PCI-E as clock source, and 1G uses GPHY.

And I reordered the code a little, to make it easier to read.

Found-by: "Ethan" <ethanhsiao@jmicron.com>
Fixed-by: "akeemting" <akeem@jmicron.com>
Signed-off-by: "Guo-Fu Tseng" <cooldavid@cooldavid.org>
Acked-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03 21:19:16 -08:00
Guo-Fu Tseng 6dc0c97fdc jme: Advances version number
Advances the driver version after modification.

Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 19:51:33 -07:00
Guo-Fu Tseng a821ebe580 jme: Added half-duplex mode and IPv6 RSS fix
1. Set bit 5 of GPREG1 to 1 to enable hardware workaround for half-duplex
   mode. Which the MAC processor generates CRS/COL by itself instead of
   receive it from PHY processor.

2. Set bit 6 of GPREG1 to 1 to enable hardware workaround that masks the
   MAC processor working right while calculating IPv6 RSS in 10/100
   mode.

3. Group the workaround codes all together.

Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-08 19:51:31 -07:00
Guo-Fu Tseng 95252236e7 jme: JMicron Gigabit Ethernet Driver
Supporting JMC250, and JMC260.

Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Acked-and-tested-by: Ethan Hsiao <ethanhsiao@jmicron.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-18 11:34:54 -04:00