Commit Graph

26 Commits

Author SHA1 Message Date
Andrew Vasquez 00a537b820 [SCSI] qla2xxx: Correct usage of inconsistent timeout values while issuing ELS commands.
The original code would incorrectly hardcode ELS timeout values
rather than using the traditional '2 * r_a_tov' value.  In some
cases, the hardcoded values would be larger than the
mailbox-command-timeout and result in a needless BIG_HAMMER (ISP
reset), the typical recovery mechanism employed in such cases.

The second defect in the original code was in the assignment of
the default 'ha->r_a_tov' to twice the traditional value.
Correct this by setting the value to 10 seconds.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-03-03 13:11:35 -06:00
Joe Perches b1c118121a drivers/scsi/: Spelling fixes
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Acked-by: James Smart <james.smart@emulex.com>
Acked-by: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: David Somayajulu <david.somayajulu@qlogic.com>
Acked-by: Mark Salyzyn <mark_salyzyn@adaptec.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 17:28:22 +02:00
Andrew Vasquez 8a85e17152 [SCSI] qla2xxx: Set correct attribute count during FDMI RPA.
Also remove legacy '/proc' name during OS_DEVICE_NAME
registration.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12 14:50:06 -04:00
Andrew Vasquez a3cbdfad15 [SCSI] qla2xxx: Correct 8GB iIDMA support.
Original implementation manipulated the FC_GS values for
port-speed.  Transition the codes to use the driver's own
internal representations as this makes for a reduction in
duplicate 'conversion' codes throughout the driver.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-15 13:03:20 -05:00
Andrew Vasquez c3a2f0dfe1 [SCSI] qla2xxx: Add ISP25XX support.
Large code-reuse from ISP24xx, consolidate RISC memory
extraction routines during firmware-dump.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20 09:25:29 -05:00
Andrew Vasquez fd34f55694 [SCSI] qla2xxx: Re-factor isp_operations to static structures.
In preparation for new ISP types.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20 09:24:22 -05:00
Andrew Vasquez 5881569bb3 [SCSI] qla2xxx: Correct setting of 'current' and 'supported' speeds during FDMI registration.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20 09:23:45 -05:00
Andrew Vasquez c76f2c013f [SCSI] qla2xxx: Generalize iIDMA support.
In preparation for new ISP types.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20 09:02:04 -05:00
Andrew Vasquez e428924ccd [SCSI] qla2xxx: Generalize FW-Interface-2 support.
In preparation for new ISP types.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20 08:59:09 -05:00
Seokmann Ju 2c3dfe3f6a [SCSI] qla2xxx: add support for NPIV
Following patch adds support for NPIV (N-Port ID Virtualization) to the
qla2xxx.

- supported within switched-fabric topologies only.
- supports up to 63 virtual ports on each physical port.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-14 19:08:05 -05:00
Andrew Vasquez 4346b14942 [SCSI] qla2xxx: Detect GPSC capabilities within a fabric.
Disable subsequent GPSC queries if Fabric Management services do
not support the operation.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-03 16:57:54 -06:00
Andrew Vasquez 71ea9949a3 [SCSI] qla2xxx: Use proper prep_ms_iocb() function during GFPN_ID.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-03 16:57:50 -06:00
Andrew Vasquez cdfc82ade6 [SCSI] qla2xxx: Correct endianess issue while interrogating MS status.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-03 16:57:46 -06:00
Andrew Vasquez a740a3f040 [SCSI] qla2xxx: Add support for system hostname FC transport attribute.
The system hostname will be used during a subsequent FDMI registration
with the fabric.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-03 17:28:46 -05:00
Andrew Vasquez 1620f7c2d8 [SCSI] qla2xxx: Add support for symbolic nodename FC transport attribute.
Refactored original code from qla_gs.c:qla2x00_rsnn_nn().

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-03 17:28:42 -05:00
Andrew Vasquez d8b4521349 [SCSI] qla2xxx: Add iIDMA support.
iIDMA (Intelligent Interleaved Direct Memory Access) allows for
the HBA hardware to send FC frames at the rate at which they can
be received by a target device.  By taking advantage of the
higher link rate, the HBA can maximize bandwidth utilization in a
heterogeneous multi-speed SAN.

Within a fabric topology, port speed detection is done via a Name
Server command (GFPN_ID) followed by a Fabric Management command
(GPSC).  In an FCAL/N2N topology, port speed is based on the HBA
link-rate.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-03 17:28:38 -05:00
andrew.vasquez@qlogic.com 044cc6c8ec [SCSI] qla2xxx: Add ISP54xx support.
Chip is similar in form to our ISP24xx offering.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-12 09:38:03 -06:00
andrew.vasquez@qlogic.com c0eb875526 [SCSI] qla2xxx: Correct setting of FDMI supported/current port speed.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:36 -06:00
andrew.vasquez@qlogic.com 9403688e9b [SCSI] qla2xxx: Correct FC4 feature assignment during RFF_ID.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:55:24 -06:00
Andrew Vasquez fa90c54f6d [SCSI] qla2xxx: Update license.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28 11:53:23 -05:00
Andrew Vasquez cca5335caf [SCSI] qla2xxx: Add FDMI support.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04 19:53:07 -05:00
Andrew Vasquez ae91193cd5 [SCSI] qla2xxx: Update copyright banner.
Update copyright banner.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14 11:12:12 -04:00
Andrew Vasquez fa2a1ce53d [SCSI] qla2xxx: Code scrubbing.
Code scrubbing.

 - Remove trailing whitespace from driver files.
 - Remove unused #defines and inlines.
 - Standardize on C comments (// -> /* */)

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14 11:03:15 -04:00
Andrew Vasquez 8c958a99d6 [SCSI] qla2xxx: Generalize SNS generic-services routines.
Generalize SNS generic-services routines.

Consolidate completion-status checking while adding support
for the ISP24xx.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14 10:56:14 -04:00
Andrew Vasquez abbd8870b9 [SCSI] qla2xxx: Factor-out ISP specific functions to method-based call tables.
Factor-out ISP specific functions to method-based call tables.

In anticipation of ISP24xx/ISP25xx support, factor-out ISP
specific functions into a method-based call table.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-14 10:47:30 -04:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00