Commit Graph

826 Commits

Author SHA1 Message Date
Gabor Juhos 6d1c8fde2d MIPS: ath79: add revision id for the AR933X SoCs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Kathy Giori <kgiori@qca.qualcomm.com>
Cc: "Luis R.  Rodriguez" <rodrigue@qca.qualcomm.com>
Patchwork: https://patchwork.linux-mips.org/patch/2538/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:02:45 +00:00
Gabor Juhos 7e98aa4639 MIPS: ath79: add common USB Host Controller device
Add common platform_device and helper code to make the registration of
the built-in USB controllers easier on the board which are using them.
Also register the USB controller on the AP81 and PB44 boards.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2442/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:02:44 +00:00
Gabor Juhos d2b4ac1e5d MIPS: ath79: Handle more MISC IRQs
The AR724X SoCs have more IRQ sources hooked into the MISC IRQ controller.
The patch adds support for them.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2440/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:02:44 +00:00
Gabor Juhos 2f8501b9b8 MIPS: ath79: Change number of available IRQs
The status register of the miscellaneous interrupt controller is 32 bits
wide, but the actual value of NR_IRQS covers only 8 of them. Change
NR_IRQS in order to make all of those interrupt lines usable.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2441/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:02:44 +00:00
Manuel Lauss 1c043f16a0 MIPS: Alchemy: Add RTC device to all devboards
All Devboards can use the 32kHz counter as a RTC device.

Also delete the custom CMOS RTC header, which can be used for the
DS1693 on the PB1500.  But since it doesn't have a buffer battery
it is as useful as the on-chip RTC which I prefer.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2874/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:02:07 +00:00
Manuel Lauss 6f7c8623db MIPS: Alchemy: Merge PB1200 support into DB1200 code.
The PB1200 is basically a DB1200 with additional MMC and camera sockets
and different base addresses for external hardware (CPLD, IDE, Net, NAND).

This patch implements the missing PB1200 features in DB1200 support code
and runtime board detection.

Tested on DB1200 only.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2880/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:02:07 +00:00
Manuel Lauss a9b71a8f0f MIPS: Alchemy: move au1200fb global functions to platform data
au1200fb calls 3 functions which have to be defined in board code.
Fix this ugliness with the introduction of platform_data.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: linux-fbdev@vger.kernel.org
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2871/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:02:07 +00:00
Manuel Lauss f869d42e58 MIPS: Alchemy: Improved DB1550 support, with audio and serial busses.
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2868/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:02:06 +00:00
Manuel Lauss 64cd04d0cf MIPS: Alchemy: Basic support for the DB1300 board.
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2867/
Patchwork: https://patchwork.linux-mips.org/patch/2919/
Patchwork: https://patchwork.linux-mips.org/patch/2928/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:02:06 +00:00
Manuel Lauss 809f36c6f4 MIPS: Alchemy: Au1300 SoC support
Add basic support for the Au1300 variant(s):
- New GPIO/Interrupt controller
- DBDMA ids
- USB setup
- MMC support
- enable various PSC drivers
- detection code.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2866/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:02:05 +00:00
Manuel Lauss 3f724080a3 MIPS: Alchemy: remove PB1000 support
Noone seems to have test hardware or care anymore.  Drop PB1000 support
and along with it the old Alchemy PCMCIA socket driver.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: linux-mips@linux-mips.org
Cc: netdev@vger.kernel.org
Cc: linux-pcmcia@lists.infradead.org
Patchwork: https://patchwork.linux-mips.org/patch/2881/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:02:05 +00:00
Ralf Baechle 3d18c98367 MIPS: Fix Jazz 64-bit build error.
Move add_wired_entry to its own header file from where it will be
always included.  Patch up other users of add_wired_entry to also include
the header as needed.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-12-07 22:01:45 +00:00
Tejun Heo d88e4cb671 freezer: remove now unused TIF_FREEZE
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arch@vger.kernel.org
2011-11-21 12:32:25 -08:00
David S. Miller efd0bf97de Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
The forcedeth changes had a conflict with the conversion over
to atomic u64 statistics in net-next.

The libertas cfg.c code had a conflict with the bss reference
counting fix by John Linville in net-next.

Conflicts:
	drivers/net/ethernet/nvidia/forcedeth.c
	drivers/net/wireless/libertas/cfg.c
2011-11-21 13:50:33 -05:00
John W. Linville e11c259f74 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
Conflicts:
	include/net/bluetooth/bluetooth.h
2011-11-17 13:11:43 -05:00
Johannes Berg 6e3e939f3b net: add wireless TX status socket option
The 802.1X EAPOL handshake hostapd does requires
knowing whether the frame was ack'ed by the peer.
Currently, we fudge this pretty badly by not even
transmitting the frame as a normal data frame but
injecting it with radiotap and getting the status
out of radiotap monitor as well. This is rather
complex, confuses users (mon.wlan0 presence) and
doesn't work with all hardware.

To get rid of that hack, introduce a real wifi TX
status option for data frame transmissions.

This works similar to the existing TX timestamping
in that it reflects the SKB back to the socket's
error queue with a SCM_WIFI_STATUS cmsg that has
an int indicating ACK status (0/1).

Since it is possible that at some point we will
want to have TX timestamping and wifi status in a
single errqueue SKB (there's little point in not
doing that), redefine SO_EE_ORIGIN_TIMESTAMPING
to SO_EE_ORIGIN_TXSTATUS which can collect more
than just the timestamp; keep the old constant
as an alias of course. Currently the internal APIs
don't make that possible, but it wouldn't be hard
to split them up in a way that makes it possible.

Thanks to Neil Horman for helping me figure out
the functions that add the control messages.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-09 16:01:02 -05:00
David Daney 8ff8584e51 MIPS: Hook up process_vm_readv and process_vm_writev system calls.
Signed-off-by: David Daney <david.daney@cavium.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2918/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-09 00:07:56 +00:00
Florian Fainelli df55a66add MIPS: BCM47xx: fix build with GENERIC_GPIO configuration
Since eb9ae7f2 (gpio: fix build error in include/asm-generic/gpio.h)
the generic version of gpio.h calls __gpio_{set,get}_value which we
do not define. Get rid of asm-generic/gpio.h and define the missing
stubs directly for BCM47xx to build.

Reported-by: Ralf Baechle <ralf@linux-mips.org>
To: linux-mips@linux-mips.org
CC: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/2885/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-11-08 12:35:29 +00:00
Linus Torvalds d6748066ad Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits)
  MIPS: O32: Provide definition of registers ta0 .. ta3.
  MIPS: perf: Add Octeon support for hardware perf.
  MIPS: perf: Add support for 64-bit perf counters.
  MIPS: perf: Reorganize contents of perf support files.
  MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c
  MIPS: Add accessor macros for 64-bit performance counter registers.
  MIPS: Add probes for more Octeon II CPUs.
  MIPS: Add more CPU identifiers for Octeon II CPUs.
  MIPS: XLR, XLS: Add comment for smp setup
  MIPS: JZ4740: GPIO: Check correct IRQ in demux handler
  MIPS: JZ4740: GPIO: Simplify IRQ demuxer
  MIPS: JZ4740: Use generic irq chip
  MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines
  MIPS: Alchemy: kill au1xxx.h header
  MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines
  MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep
  MIPS: Alchemy: Redo PCI as platform driver
  MIPS: Alchemy: more base address cleanup
  MIPS: Alchemy: rewrite USB platform setup.
  MIPS: Alchemy: abstract USB block control register access
  ...

Fix up trivial conflicts in:
	arch/mips/alchemy/devboards/db1x00/platform.c
	drivers/ide/Kconfig
	drivers/mmc/host/au1xmmc.c
	drivers/video/Kconfig
	sound/mips/Kconfig
2011-11-03 13:28:14 -07:00
Manuel Lauss c5de6467d2 i2c-au1550: remove usage of volatile keyword
Replace the usage of "volatile"s with register accessor functions.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-29 11:14:09 +01:00
Linus Torvalds f362f98e7c Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/hch/vfs-queue
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/hch/vfs-queue: (21 commits)
  leases: fix write-open/read-lease race
  nfs: drop unnecessary locking in llseek
  ext4: replace cut'n'pasted llseek code with generic_file_llseek_size
  vfs: add generic_file_llseek_size
  vfs: do (nearly) lockless generic_file_llseek
  direct-io: merge direct_io_walker into __blockdev_direct_IO
  direct-io: inline the complete submission path
  direct-io: separate map_bh from dio
  direct-io: use a slab cache for struct dio
  direct-io: rearrange fields in dio/dio_submit to avoid holes
  direct-io: fix a wrong comment
  direct-io: separate fields only used in the submission path from struct dio
  vfs: fix spinning prevention in prune_icache_sb
  vfs: add a comment to inode_permission()
  vfs: pass all mask flags check_acl and posix_acl_permission
  vfs: add hex format for MAY_* flag values
  vfs: indicate that the permission functions take all the MAY_* flags
  compat: sync compat_stats with statfs.
  vfs: add "device" tag to /proc/self/mountstats
  cleanup: vfs: small comment fix for block_invalidatepage
  ...

Fix up trivial conflict in fs/gfs2/file.c (llseek changes)
2011-10-28 10:49:34 -07:00
Eric W. Biederman 1448c721e4 compat: sync compat_stats with statfs.
This was found by inspection while tracking a similar
bug in compat_statfs64, that has been fixed in mainline
since decemeber.

- This fixes a bug where not all of the f_spare fields
  were cleared on mips and s390.
- Add the f_flags field to struct compat_statfs
- Copy f_flags to userspace in case someone cares.
- Use __clear_user to copy the f_spare field to userspace
  to ensure that all of the elements of f_spare are cleared.
  On some architectures f_spare is has 5 ints and on some
  architectures f_spare only has 4 ints.  Which makes
  the previous technique of clearing each int individually
  broken.

I don't expect anyone actually uses the old statfs system
call anymore but if they do let them benefit from having
the compat and the native version working the same.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2011-10-28 14:58:53 +02:00
Linus Torvalds 8a9ea3237e Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1745 commits)
  dp83640: free packet queues on remove
  dp83640: use proper function to free transmit time stamping packets
  ipv6: Do not use routes from locally generated RAs
  |PATCH net-next] tg3: add tx_dropped counter
  be2net: don't create multiple RX/TX rings in multi channel mode
  be2net: don't create multiple TXQs in BE2
  be2net: refactor VF setup/teardown code into be_vf_setup/clear()
  be2net: add vlan/rx-mode/flow-control config to be_setup()
  net_sched: cls_flow: use skb_header_pointer()
  ipv4: avoid useless call of the function check_peer_pmtu
  TCP: remove TCP_DEBUG
  net: Fix driver name for mdio-gpio.c
  ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT
  rtnetlink: Add missing manual netlink notification in dev_change_net_namespaces
  ipv4: fix ipsec forward performance regression
  jme: fix irq storm after suspend/resume
  route: fix ICMP redirect validation
  net: hold sock reference while processing tx timestamps
  tcp: md5: add more const attributes
  Add ethtool -g support to virtio_net
  ...

Fix up conflicts in:
 - drivers/net/Kconfig:
	The split-up generated a trivial conflict with removal of a
	stale reference to Documentation/networking/net-modules.txt.
	Remove it from the new location instead.
 - fs/sysfs/dir.c:
	Fairly nasty conflicts with the sysfs rb-tree usage, conflicting
	with Eric Biederman's changes for tagged directories.
2011-10-25 13:25:22 +02:00
Linus Torvalds 59e5253417 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (59 commits)
  MAINTAINERS: linux-m32r is moderated for non-subscribers
  linux@lists.openrisc.net is moderated for non-subscribers
  Drop default from "DM365 codec select" choice
  parisc: Kconfig: cleanup Kernel page size default
  Kconfig: remove redundant CONFIG_ prefix on two symbols
  cris: remove arch/cris/arch-v32/lib/nand_init.S
  microblaze: add missing CONFIG_ prefixes
  h8300: drop puzzling Kconfig dependencies
  MAINTAINERS: microblaze-uclinux@itee.uq.edu.au is moderated for non-subscribers
  tty: drop superfluous dependency in Kconfig
  ARM: mxc: fix Kconfig typo 'i.MX51'
  Fix file references in Kconfig files
  aic7xxx: fix Kconfig references to READMEs
  Fix file references in drivers/ide/
  thinkpad_acpi: Fix printk typo 'bluestooth'
  bcmring: drop commented out line in Kconfig
  btmrvl_sdio: fix typo 'btmrvl_sdio_sd6888'
  doc: raw1394: Trivial typo fix
  CIFS: Don't free volume_info->UNC until we are entirely done with it.
  treewide: Correct spelling of successfully in comments
  ...
2011-10-25 12:11:02 +02:00
Ralf Baechle 3ba1e543ab MIPS: O32: Provide definition of registers ta0 .. ta3.
Later IRIX versions provide them in <sys/regdef.h> and gas also accepts
$ta0 .. $ta3 since binutils 2.18 so Linux should do the same for source
compatibility.
2011-10-24 23:34:27 +01:00
David Daney 4d36f59d87 MIPS: Add accessor macros for 64-bit performance counter registers.
Signed-off-by: David Daney <david.daney@cavium.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2789/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24 23:34:26 +01:00
David Daney 074ef0d275 MIPS: Add more CPU identifiers for Octeon II CPUs.
The CPU identifiers for cn68XX, cn66XX and cn61XX are known, so add
them.

Signed-off-by: David Daney <david.daney@cavium.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2776/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24 23:34:25 +01:00
Manuel Lauss 3766386037 MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines
Now that no driver any longer depends on the CONFIG_SOC_AU1???  symbols,
it's time to get rid of them: Move some of the platform devices to the
boards which can use them, Rename a few (unused) constants in the header,
Replace them with MIPS_ALCHEMY in the various Kconfig files.  Finally
delete them altogether from the Alchemy Kconfig file.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/2707/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24 23:34:24 +01:00
Manuel Lauss 50d5676eba MIPS: Alchemy: kill au1xxx.h header
No longer required

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/2705/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 delete mode 100644 arch/mips/include/asm/mach-au1x00/au1xxx.h
2011-10-24 23:34:24 +01:00
Manuel Lauss f2e442fd2f MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines
This patch gets rid of all CONFIG_SOC_AU1XXX defines in
DMA/DBDMA-related code.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/2704/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24 23:34:24 +01:00
Manuel Lauss d4f07ae748 MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep
au1xxx-ide uses defines from the pb1200/db1200 headers:
get DBDMA ID through platform resource information,
hardcode register spacing.  The only 2 users of this driver (and
the only boards it can really work on realiably) use the same
register layout.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: linux-ide@vger.kernel.org
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: linux-ide@vger.kernel.org
Acked-by: David S. Miller <davem@davemloft.net>
Patchwork: https://patchwork.linux-mips.org/patch/2716/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24 23:34:24 +01:00
Manuel Lauss 7517de3486 MIPS: Alchemy: Redo PCI as platform driver
- Rewrite Alchemy PCI support as a platform driver.
- Fixup boards which have PCI.

Run-tested on DB1500 and DB1550.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/2706/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 delete mode 100644 arch/mips/alchemy/common/pci.c
 delete mode 100644 arch/mips/pci/fixup-au1000.c
 delete mode 100644 arch/mips/pci/ops-au1000.c
 create mode 100644 arch/mips/pci/pci-alchemy.c
2011-10-24 23:34:24 +01:00
Manuel Lauss 7cc2e272da MIPS: Alchemy: more base address cleanup
remove all redundant peripheral base address defines, fix
all affected boards and drivers.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/2700/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24 23:34:24 +01:00
Manuel Lauss b9581b8488 MIPS: Alchemy: rewrite USB platform setup.
Use runtime CPU detection to setup all USB parts.
Remove the Au1200 OTG and UDC platform devices since there are no
drivers for them anyway.
Clean up the USB address mess in the au1000 header.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/2703/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24 23:34:23 +01:00
Manuel Lauss ce6bc92285 MIPS: Alchemy: abstract USB block control register access
Alchemy chips have one or more registers which control access
to the usb blocks as well as PHY configuration.  I don't want
the OHCI/EHCI glues to know about the different registers and bits;
new code hides the gory details of USB configuration from them.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: linux-usb@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Patchwork: https://patchwork.linux-mips.org/patch/2709/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 create mode 100644 drivers/usb/host/alchemy-common.c
2011-10-24 23:34:23 +01:00
Manuel Lauss ce1d43b9a9 MIPS: Alchemy: support multiple GPIO styles in one kernel
For GPIOLIB=y decide at runtime which gpiochips to register;
in the GPIOLIB=n case, the gpio headers need to be reshuffled
a bit to make multiple implementations coexist peacefully.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/2679/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-24 23:34:23 +01:00
David S. Miller 1805b2f048 Merge branch 'master' of ra.kernel.org:/pub/scm/linux/kernel/git/davem/net 2011-10-24 18:18:09 -04:00
Ralf Baechle b77bb37a2a Revert "MIPS: LD/SD o32 macro GAS fix update"
This reverts commit 97475f8b42e83be2966aa2d70ab9c98477701c53 (lmo) /
82b89152f0 (kernel.org) [MIPS: LD/SD o32
macro GAS fix update].

Turns out this patch is producing many build errors with gcc 4.2.  Based
on further testing with a test case extracted from the build errors found
further build errors and suboptimal generation even in violation of the
"R" constraint.

To make matters worse, the binutils changes also don't work quite as
intended so revert this patch for now.
2011-10-20 15:00:19 +01:00
Ralf Baechle dd5d1380f1 MIPS: SNI: Fix conflicting wrapper symbols for headers.
If Open Firmware / Device Tree support is enabled on a SNI RM kernel both
<asm/mipsprom.h> and <asm/prom.h> will be included into some .c files.
Since both headers use the same wrapper symbol only the inclusion of the
first file will have an effect but the 2nd file will be ignored resulting
in a build error.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-20 15:00:18 +01:00
Ralf Baechle d9cdc901af MIPS: cache: Provide cache flush operations for XFS
Until now flush_kernel_vmap_range() and invalidate_kernel_vmap_range() did
not exist on MIPS resulting in heavy cache corruption on XFS filesystems.

Left for the post-3.0 time: optimization and make this work with highmem,
too.  Since the combination of highmem + cache aliases atm doesn't work
this isn't a regression.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/2505/
2011-10-20 15:00:18 +01:00
Paul Bolle 395cf9691d doc: fix broken references
There are numerous broken references to Documentation files (in other
Documentation files, in comments, etc.). These broken references are
caused by typo's in the references, and by renames or removals of the
Documentation files. Some broken references are simply odd.

Fix these broken references, sometimes by dropping the irrelevant text
they were part of.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-27 18:08:04 +02:00
David Daney 2f19d080fb MIPS: Octeon: Enable C0_UserLocal probing.
Octeon2 processor cores have a UserLocal register.  Remove the hard
coded negative probe and allow the standard probing to detect this
feature.

Signed-off-by: David Daney <david.daney@cavium.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2578/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-09-24 01:44:41 +02:00
David Daney d968275921 MIPS: Don't clobber CP0_STATUS value for CONFIG_MIPS_MT_SMTC
Reported-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/2753/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-09-21 17:54:02 +02:00
Jesper Juhl d4001e086b MIPS: Remove unneeded version.h includes from arch/mips/
It was pointed out by 'make versioncheck' that some includes of
linux/version.h are not needed in arch/mips/.
This patch removes them.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
To: LKML <linux-kernel@vger.kernel.org>
Cc: trivial@kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2540/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-09-17 02:40:36 +02:00
Hauke Mehrtens c1d1c5d421 bcm47xx: add support for bcma bus
This patch add support for the bcma bus. Broadcom uses only Mips 74K
CPUs on the new SoC and on the old ons using ssb bus there are no Mips
74K CPUs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08 14:29:32 -04:00
Hauke Mehrtens a656ffcbc7 bcm47xx: make it possible to build bcm47xx without ssb.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08 14:29:31 -04:00
Hauke Mehrtens 08ccf57283 bcm47xx: prepare to support different buses
Prepare bcm47xx to support different System buses. Before adding
support for bcma it should be possible to build bcm47xx without the
need of ssb. With this patch bcm47xx does not directly contain a
ssb_bus, but a union contain all the supported system buses. As a SoC
just uses one system bus a union is a good choice.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08 14:29:30 -04:00
Arun Sharma 7847777a45 atomic: cleanup asm-generic atomic*.h inclusion
After changing all consumers of atomics to include <linux/atomic.h>, we
ran into some compile time errors due to this dependency chain:

linux/atomic.h
  -> asm/atomic.h
    -> asm-generic/atomic-long.h

where atomic-long.h could use funcs defined later in linux/atomic.h
without a prototype.  This patches moves the code that includes
asm-generic/atomic*.h to linux/atomic.h.

Archs that need <asm-generic/atomic64.h> need to select
CONFIG_GENERIC_ATOMIC64 from now on (some of them used to include it
unconditionally).

Compile tested on i386 and x86_64 with allnoconfig.

Signed-off-by: Arun Sharma <asharma@fb.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
Arun Sharma f24219b4e9 atomic: move atomic_add_unless to generic code
This is in preparation for more generic atomic primitives based on
__atomic_add_unless.

Signed-off-by: Arun Sharma <asharma@fb.com>
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
Arun Sharma 60063497a9 atomic: use <linux/atomic.h>
This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>

Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26 16:49:47 -07:00
Linus Torvalds 6fd4ce8864 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (31 commits)
  MIPS: Close races in TLB modify handlers.
  MIPS: Add uasm UASM_i_SRL_SAFE macro.
  MIPS: RB532: Use hex_to_bin()
  MIPS: Enable cpu_has_clo_clz for MIPS Technologies' platforms
  MIPS: PowerTV: Provide cpu-feature-overrides.h
  MIPS: Remove pointless return statement from empty void functions.
  MIPS: Limit fixrange_init() to the FIXMAP region
  MIPS: Install handlers for software IRQs
  MIPS: Move FIXADDR_TOP into spaces.h
  MIPS: Add SYNC after cacheflush
  MIPS: pfn_valid() is broken on low memory HIGHMEM systems
  MIPS: HIGHMEM DMA on noncoherent MIPS32 processors
  MIPS: topdown mmap support
  MIPS: Remove redundant addr_limit assignment on exec.
  MIPS: AR7: Replace __attribute__((__packed__)) with __packed
  MIPS: AR7: Remove 'space before tabs' in platform.c
  MIPS: Lantiq: Add missing clk_enable and clk_disable functions.
  MIPS: AR7: Fix trailing semicolon bug in clock.c
  MAINTAINERS: Update MIPS entry.
  MIPS: BCM63xx: Remove duplicate PERF_IRQSTAT_REG definition
  ...
2011-07-26 14:17:28 -07:00
David Daney f0daaaf523 MIPS: Add uasm UASM_i_SRL_SAFE macro.
This can be used from either 32-bit or 64-bit code to generate logical
right shifts of any constant amount.

Signed-off-by: David Daney <david.daney@cavium.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2576/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-26 06:47:36 +01:00
Linus Torvalds d3ec4844d4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  fs: Merge split strings
  treewide: fix potentially dangerous trailing ';' in #defined values/expressions
  uwb: Fix misspelling of neighbourhood in comment
  net, netfilter: Remove redundant goto in ebt_ulog_packet
  trivial: don't touch files that are removed in the staging tree
  lib/vsprintf: replace link to Draft by final RFC number
  doc: Kconfig: `to be' -> `be'
  doc: Kconfig: Typo: square -> squared
  doc: Konfig: Documentation/power/{pm => apm-acpi}.txt
  drivers/net: static should be at beginning of declaration
  drivers/media: static should be at beginning of declaration
  drivers/i2c: static should be at beginning of declaration
  XTENSA: static should be at beginning of declaration
  SH: static should be at beginning of declaration
  MIPS: static should be at beginning of declaration
  ARM: static should be at beginning of declaration
  rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check
  Update my e-mail address
  PCIe ASPM: forcedly -> forcibly
  gma500: push through device driver tree
  ...

Fix up trivial conflicts:
 - arch/arm/mach-ep93xx/dma-m2p.c (deleted)
 - drivers/gpio/gpio-ep93xx.c (renamed and context nearby)
 - drivers/net/r8169.c (just context changes)
2011-07-25 13:56:39 -07:00
Shinya Kuribayashi 5fba096080 MIPS: Enable cpu_has_clo_clz for MIPS Technologies' platforms
Enable cpu_has_clo_clz only when CONFIG_CPU_MIPS32 or CONFIG_CPU_MIPS64
is selected.  This will optimize fls() and __fls() to use CLZ insn, and
eventually ffs() and __ffs() as well.

Malta and MIPSSim are development platforms, and need to take care of
various processor configurations, release rivisions and so on, even
across different MIPS ISAs.  For such platforms we have to be careful,
for instance, with turning on cpu_has_mips{32,64}r[12] features.

As for CLZ, all MIPS32/64 processors support it, regardless of release
revisions.

Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
To: David VomLehn <dvomlehn@cisco.com>
To: macro@linux-mips.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1453/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-25 17:26:55 +01:00
David VomLehn c2b78c8e82 MIPS: PowerTV: Provide cpu-feature-overrides.h
This will optimize fls() and __fls() to use CLZ throughout the kernel,
and any other optimizations that depend on constant cpu_has_* values
will also be used.

Signed-off-by: David VomLehn <dvomlehn@cisco.com>
Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
To: David VomLehn <dvomlehn@cisco.com>
To: macro@linux-mips.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1452/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-25 17:26:55 +01:00
Ralf Baechle 98f4a2c27c MIPS: Remove pointless return statement from empty void functions.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
To: Sergei Shtylyov <sshtylyov@mvista.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2391/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-25 17:26:55 +01:00
Kevin Cernekee 565b60de32 MIPS: Move FIXADDR_TOP into spaces.h
Memory maps and addressing quirks are normally defined in <spaces.h>.
There are already three targets that need to override FIXADDR_TOP, and
others exist.  This will be a cleaner approach than adding lots of
ifdefs in fixmap.h .

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1573/
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-25 17:26:53 +01:00
Jian Peng d0be89f6c2 MIPS: topdown mmap support
This patch introduced topdown mmap support in user process address
space allocation policy.

Recently, we ran some large applications that use mmap heavily and
lead to OOM due to inflexible mmap allocation policy on MIPS32.

Since most other major archs supported it for years, it is reasonable
to follow the trend and reduce the pain of porting applications.

Due to cache aliasing concern, arch_get_unmapped_area_topdown() and
other helper functions are implemented in arch/mips/kernel/syscall.c.

Signed-off-by: Jian Peng <jipeng2005@gmail.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2389/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-25 17:26:51 +01:00
Linus Torvalds a99a7d1436 Merge branch 'timers-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  mips: Fix i8253 clockevent fallout
  i8253: Cleanup outb/inb magic
  arm: Footbridge: Use common i8253 clockevent
  mips: Use common i8253 clockevent
  x86: Use common i8253 clockevent
  i8253: Create common clockevent implementation
  i8253: Export i8253_lock unconditionally
  pcpskr: MIPS: Make config dependencies finer grained
  pcspkr: Cleanup Kconfig dependencies
  i8253: Move remaining content and delete asm/i8253.h
  i8253: Consolidate definitions of PIT_LATCH
  x86: i8253: Consolidate definitions of global_clock_event
  i8253: Alpha, PowerPC: Remove unused asm/8253pit.h
  alpha: i8253: Cleanup remaining users of i8253pit.h
  i8253: Remove I8253_LOCK config
  i8253: Make pcsp sound driver use the shared i8253_lock
  i8253: Make pcspkr input driver use the shared i8253_lock
  i8253: Consolidate all kernel definitions of i8253_lock
  i8253: Unify all kernel declarations of i8253_lock
  i8253: Create linux/i8253.h and use it in all 8253 related files
2011-07-22 16:51:56 -07:00
Phil Carmody 497888cf69 treewide: fix potentially dangerous trailing ';' in #defined values/expressions
All these are instances of
  #define NAME value;
or
  #define NAME(params_opt) value;

These of course fail to build when used in contexts like
  if(foo $OP NAME)
  while(bar $OP NAME)
and may silently generate the wrong code in contexts such as
  foo = NAME + 1;    /* foo = value; + 1; */
  bar = NAME - 1;    /* bar = value; - 1; */
  baz = NAME & quux; /* baz = value; & quux; */

Reported on comp.lang.c,
Message-ID: <ab0d55fe-25e5-482b-811e-c475aa6065c3@c29g2000yqd.googlegroups.com>
Initial analysis of the dangers provided by Keith Thompson in that thread.

There are many more instances of more complicated macros having unnecessary
trailing semicolons, but this pile seems to be all of the cases of simple
values suffering from the problem. (Thus things that are likely to be found
in one of the contexts above, more complicated ones aren't.)

Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-21 14:10:00 +02:00
Jonas Gorski b29af676a2 MIPS: BCM63xx: Remove duplicate PERF_IRQSTAT_REG definition
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Cc: linux-mips@linux-mips.org
Acked-by: Florian Fainelli <florian@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/2461/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-20 23:12:12 +01:00
Ralf Baechle 4f55fd752f MIPS: ARC: Fix build of firmware library on uniprocessor.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-20 23:12:11 +01:00
Ralf Baechle 852fe3105e MIPS: Malta: Fix crash in SMP kernel on non-CMP systems.
Since 6be63bbbda (lmo) rsp.
af3a1f6f48 (kernel.org) the Malta code does
no longer probe for presence of GCMP if CMP is not configured.  This means
that the variable gcmp_present well be left at its default value of -1
which normally is meant to indicate that GCMP has not yet been mmapped.
This non-zero value is now interpreted as GCMP being present resulting
in a write attempt to a GCMP register resulting in a crash.

Reported and a build fix on top of my fix by Rob Landley <rob@landley.net>.

Reported-by: Rob Landley <rob@landley.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/2413/
2011-07-20 23:12:10 +01:00
Ralf Baechle b12acf163f MIPS: Wire up sendmmsg and renumber setns syscall.
Renumbering was necessary because I had already wired up setns(2) in the
linux-mips.org tree in commit c3fce54644cabbb90700cc3acc040718a377f609
[MIPS: Wire up new sendmmsg syscall.] but the same syscall numbers were
used by 7b21fddd08 [ns: Wire up the setns
system call] resulting in a conflict.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-20 23:12:10 +01:00
Ralf Baechle 731f90fae9 MIPS: SMTC: Fix build.
Commit ee6114202e48dc282c6d04741e9c5d7171eb8bb8 (lmo) rsp.
1685f3b158 (kernel.org) ["MIPS: SMTC: Move
declaration of smtc_init_secondary to <asm/smtc.h>."] didn't quite do
that - it rather lost the declaration of smtc_init_secondary resulting in
a build error.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-20 23:12:10 +01:00
Ralf Baechle 1bed3b9c71 MIPS: GT64120: Remove useless inclusion of clocksource.h.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-07-20 23:12:10 +01:00
Jesper Juhl 628d7f697c MIPS: static should be at beginning of declaration
Make sure that the 'static' keywork is at the beginning of declaration
for arch/mips/include/asm/mach-jz4740/gpio.h

This gets rid of warnings like
  warning: ‘static’ is not at beginning of declaration
when building with -Wold-style-declaration (and/or -Wextra which also
enables it).
Also a few tiny whitespace changes.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-07-11 14:13:46 +02:00
Daniel Kalmar 94ea09c6a8 MIPS: Add new unwind_stack variant
The unwind_stack_by_address variant supports unwinding based
on any kernel code address.
This symbol is also exported so it can be called from modules.

Signed-off-by: Daniel Kalmar <kalmard@homejinni.com>
Signed-off-by: Gergely Kis <gergely@homejinni.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-06-15 14:35:33 +02:00
Ralf Baechle 850492760c i8253: Move remaining content and delete asm/i8253.h
Move setup_pit_timer() declaration to the common header file and
remove the arch specific ones.

[ tglx: Move it to linux/i8253.h instead of asm/mips and asm/x86 ]

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-mips@linux-mips.org
Cc: Sergei Shtylyov <sshtylyov@mvista.com
Link: http://lkml.kernel.org/r/20110601180610.913463093@duck.linux-mips.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-06-09 15:01:40 +02:00
Ralf Baechle 49cf3f29a1 i8253: Consolidate definitions of PIT_LATCH
x86 defines PIT_LATCH as LATCH which in <linux/timex.h> is defined as
((CLOCK_TICK_RATE + HZ/2) / HZ) and <asm/timex.h> again defines
CLOCK_TICK_RATE as PIT_TICK_RATE.

MIPS defines PIT_LATCH as LATCH which in <linux/timex.h> is defined as
((CLOCK_TICK_RATE + HZ/2) / HZ) and <asm/timex.h> again defines
CLOCK_TICK_RATE as 1193182.

ARM defines PITCH_LATCH as ((PIT_TICK_RATE + HZ / 2) / HZ) - and that's
the sanest thing and equivalent to above definitions so use that as the
new definition in <linux/i8253.h>.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@linux-mips.org
Link: http://lkml.kernel.org/r/20110601180610.832810002@duck.linux-mips.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-06-09 15:01:40 +02:00
Ralf Baechle cb2455aa27 i8253: Unify all kernel declarations of i8253_lock
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@linux-mips.org
Link: http://lkml.kernel.org/r/20110601180610.134151920@duck.linux-mips.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-06-09 15:01:38 +02:00
Linus Torvalds 571503e100 Merge branch 'setns'
* setns:
  ns: Wire up the setns system call

Done as a merge to make it easier to fix up conflicts in arm due to
addition of sendmmsg system call
2011-05-28 10:51:01 -07:00
Eric W. Biederman 7b21fddd08 ns: Wire up the setns system call
32bit and 64bit on x86 are tested and working.  The rest I have looked
at closely and I can't find any problems.

setns is an easy system call to wire up.  It just takes two ints so I
don't expect any weird architecture porting problems.

While doing this I have noticed that we have some architectures that are
very slow to get new system calls.  cris seems to be the slowest where
the last system calls wired up were preadv and pwritev.  avr32 is weird
in that recvmmsg was wired up but never declared in unistd.h.  frv is
behind with perf_event_open being the last syscall wired up.  On h8300
the last system call wired up was epoll_wait.  On m32r the last system
call wired up was fallocate.  mn10300 has recvmmsg as the last system
call wired up.  The rest seem to at least have syncfs wired up which was
new in the 2.6.39.

v2: Most of the architecture support added by Daniel Lezcano <dlezcano@fr.ibm.com>
v3: ported to v2.6.36-rc4 by: Eric W. Biederman <ebiederm@xmission.com>
v4: Moved wiring up of the system call to another patch
v5: ported to v2.6.39-rc6
v6: rebased onto parisc-next and net-next to avoid syscall  conflicts.
v7: ported to Linus's latest post 2.6.39 tree.

>  arch/blackfin/include/asm/unistd.h     |    3 ++-
>  arch/blackfin/mach-common/entry.S      |    1 +
Acked-by: Mike Frysinger <vapier@gentoo.org>

Oh - ia64 wiring looks good.
Acked-by: Tony Luck <tony.luck@intel.com>

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-28 10:48:39 -07:00
Linus Torvalds 2a56d22202 Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits)
  ARM: 6945/1: Add unwinding support for division functions
  ARM: kill pmd_off()
  ARM: 6944/1: mm: allow ASID 0 to be allocated to tasks
  ARM: 6943/1: mm: use TTBR1 instead of reserved context ID
  ARM: 6942/1: mm: make TTBR1 always point to swapper_pg_dir on ARMv6/7
  ARM: 6941/1: cache: ensure MVA is cacheline aligned in flush_kern_dcache_area
  ARM: add sendmmsg syscall
  ARM: 6863/1: allow hotplug on msm
  ARM: 6832/1: mmci: support for ST-Ericsson db8500v2
  ARM: 6830/1: mach-ux500: force PrimeCell revisions
  ARM: 6829/1: amba: make hardcoded periphid override hardware
  ARM: 6828/1: mach-ux500: delete SSP PrimeCell ID
  ARM: 6827/1: mach-netx: delete hardcoded periphid
  ARM: 6940/1: fiq: Briefly document driver responsibilities for suspend/resume
  ARM: 6938/1: fiq: Refactor {get,set}_fiq_regs() for Thumb-2
  ARM: 6914/1: sparsemem: fix highmem detection when using SPARSEMEM
  ARM: 6913/1: sparsemem: allow pfn_valid to be overridden when using SPARSEMEM
  at91: drop at572d940hf support
  at91rm9200: introduce at91rm9200_set_type to specficy cpu package
  at91: drop boot_params and PLAT_PHYS_OFFSET
  ...
2011-05-27 19:51:32 -07:00
Linus Torvalds f23a5e1405 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM: Fix PM QOS's user mode interface to work with ASCII input
  PM / Hibernate: Update kerneldoc comments in hibernate.c
  PM / Hibernate: Remove arch_prepare_suspend()
  PM / Hibernate: Update some comments in core hibernate code
2011-05-27 14:27:34 -07:00
Russell King 03eb14199e Merge branch 'devicetree/arm-next' of git://git.secretlab.ca/git/linux-2.6 into devel-stable 2011-05-25 00:08:17 +01:00
Rafael J. Wysocki 354258011e PM / Hibernate: Remove arch_prepare_suspend()
All architectures supporting hibernation define
arch_prepare_suspend() as an empty function, so remove it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-05-24 23:35:55 +02:00
Linus Torvalds 57d19e80f4 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  b43: fix comment typo reqest -> request
  Haavard Skinnemoen has left Atmel
  cris: typo in mach-fs Makefile
  Kconfig: fix copy/paste-ism for dell-wmi-aio driver
  doc: timers-howto: fix a typo ("unsgined")
  perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c
  md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course').
  treewide: fix a few typos in comments
  regulator: change debug statement be consistent with the style of the rest
  Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations"
  audit: acquire creds selectively to reduce atomic op overhead
  rtlwifi: don't touch with treewide double semicolon removal
  treewide: cleanup continuations and remove logging message whitespace
  ath9k_hw: don't touch with treewide double semicolon removal
  include/linux/leds-regulator.h: fix syntax in example code
  tty: fix typo in descripton of tty_termios_encode_baud_rate
  xtensa: remove obsolete BKL kernel option from defconfig
  m68k: fix comment typo 'occcured'
  arch:Kconfig.locks Remove unused config option.
  treewide: remove extra semicolons
  ...
2011-05-23 09:12:26 -07:00
Linus Torvalds 0f1bdc1815 Merge branch 'timers-clocksource-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-clocksource-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  clocksource: convert mips to generic i8253 clocksource
  clocksource: convert x86 to generic i8253 clocksource
  clocksource: convert footbridge to generic i8253 clocksource
  clocksource: add common i8253 PIT clocksource
  blackfin: convert to clocksource_register_hz
  mips: convert to clocksource_register_hz/khz
  sparc: convert to clocksource_register_hz/khz
  alpha: convert to clocksource_register_hz
  microblaze: convert to clocksource_register_hz/khz
  ia64: convert to clocksource_register_hz/khz
  x86: Convert remaining x86 clocksources to clocksource_register_hz/khz
  Make clocksource name const
2011-05-19 17:44:13 -07:00
Linus Torvalds df48d8716e Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (107 commits)
  perf stat: Add more cache-miss percentage printouts
  perf stat: Add -d -d and -d -d -d options to show more CPU events
  ftrace/kbuild: Add recordmcount files to force full build
  ftrace: Add self-tests for multiple function trace users
  ftrace: Modify ftrace_set_filter/notrace to take ops
  ftrace: Allow dynamically allocated function tracers
  ftrace: Implement separate user function filtering
  ftrace: Free hash with call_rcu_sched()
  ftrace: Have global_ops store the functions that are to be traced
  ftrace: Add ops parameter to ftrace_startup/shutdown functions
  ftrace: Add enabled_functions file
  ftrace: Use counters to enable functions to trace
  ftrace: Separate hash allocation and assignment
  ftrace: Create a global_ops to hold the filter and notrace hashes
  ftrace: Use hash instead for FTRACE_FL_FILTER
  ftrace: Replace FTRACE_FL_NOTRACE flag with a hash of ignored functions
  perf bench, x86: Add alternatives-asm.h wrapper
  x86, 64-bit: Fix copy_[to/from]_user() checks for the userspace address limit
  x86, mem: memset_64.S: Optimize memset by enhanced REP MOVSB/STOSB
  x86, mem: memmove_64.S: Optimize memmove by enhanced REP MOVSB/STOSB
  ...
2011-05-19 17:36:08 -07:00
Chandrakala Chavva 7716e6548a Octeon: Fix interrupt irq settings for performance counters.
Octeon uses different interrupt irq for timer and performance counters.
Set CvmCtl[IPPCI] to correct irq value very early.

Signed-off-by: Chandrakala Chavva <cchavva@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Cc: Chandrakala Chavva <cchavva@caviumnetworks.com>
Patchwork: https://patchwork.linux-mips.org/patch/2085/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:49 +01:00
Hauke Mehrtens 9cbda726bb MIPS: BCM47xx: Fix MAC address parsing.
Some devices like the Netgear WGT634u are using minuses between the blocks
of the MAC address and other devices are using colons to separate them.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2366/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:47 +01:00
Manuel Lauss b7f720d68c MIPS: Alchemy: Clean up GPIO registers and accessors
remove au_readl/au_writel, remove the predefined GPIO1/2 KSEG1 register
addresses and fix the fallout in all boards and drivers.

This also fixes a bug in the mtx-1_wdt driver which was introduced by
commit 6ea8115bb6
("Convert mtx1 wdt to be a platform device and use generic GPIO API")
before this patch mtx-1_wdt only modified GPIO215, the patch then
used the gpio resource information as bit index into the GPIO2 register
but the conversion to the GPIO API didn't realize that.
With this patch the drivers original behaviour is restored and GPIO15
is left alone.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Cc: Florian Fainelli <florian@openwrt.org>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: linux-watchdog@vger.kernel.org
Cc: Wim Van Sebroeck <wim@iguana.be>
Patchwork: https://patchwork.linux-mips.org/patch/2381/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2011-05-19 09:55:46 +01:00
Manuel Lauss 5d4ddcb427 MIPS: Alchemy: Cleanup DMA addresses
According to the databooks, the Au1000 DMA engine must be programmed with
the physical FIFO addresses.  This patch does that; furthermore this
opened the possibility to get rid of a lot of now unnecessary address
defines.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Patchwork: https://patchwork.linux-mips.org/patch/2348/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2011-05-19 09:55:46 +01:00
Manuel Lauss 40d8bc2817 MIPS: Alchemy: Rewrite ethernet platform setup
Rewrite ethernet setup to use runtime cpu detection, and also clean up
the ethernet base address mess as far as possible.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Patchwork: https://patchwork.linux-mips.org/patch/2353/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2011-05-19 09:55:46 +01:00
Manuel Lauss 80130204b4 MIPS: Alchemy: Rewrite UART setup and constants.
Detect CPU type at runtime and setup uarts accordingly; also clean up the
uart base address mess in the process as far as possible.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Patchwork: https://patchwork.linux-mips.org/patch/2352/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org
2011-05-19 09:55:45 +01:00
Manuel Lauss adcb86279f MIPS: Alchemy: Convert dbdma.c to syscore_ops
Convert the PM sysdev to syscore_ops and clean up the ddma addresses a bit.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Patchwork: https://patchwork.linux-mips.org/patch/2351/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:45 +01:00
Manuel Lauss dca7587185 MIPS: Alchemy: irq code and constant cleanup
replace au_readl/au_writel with __raw_readl/__raw_writel,
and clean up IC-related stuff from the headers.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Patchwork: https://patchwork.linux-mips.org/patch/2354/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:45 +01:00
Manuel Lauss c1e58a3129 MIPS: Alchemy: update inlinable GPIO API
This fixes a build failure with gpio_keys and CONFIG_GPIOLIB=n (mtx1):
  CC      drivers/input/keyboard/gpio_keys.o
gpio_keys.c: In function 'gpio_keys_report_event':
gpio_keys.c:325:2: error: implicit declaration of function 'gpio_get_value_cansleep'
gpio_keys.c: In function 'gpio_keys_setup_key':
gpio_keys.c:390:3: error: implicit declaration of function 'gpio_set_debounce'

Also add stubs for the other new functions.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Patchwork: https://patchwork.linux-mips.org/patch/2346/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:45 +01:00
Ralf Baechle 8b659a3931 MIPS: Split do_syscall_trace into two functions.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:44 +01:00
Ralf Baechle c19c20ac63 MIPS: Use single define for pending work on syscall exit
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:44 +01:00
John Crispin 504d4721ee MIPS: Lantiq: Add ethernet driver
This patch adds the driver for the ETOP Packet Processing Engine (PPE32)
found inside the XWAY family of Lantiq MIPS SoCs. This driver makes 100MBit
ethernet work. Support for all 8 dma channels, gbit and the embedded switch
found on the ar9/vr9 still needs to be implemented.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com>
Cc: linux-mips@linux-mips.org
Cc: netdev@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2357/
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:43 +01:00
John Crispin dfec1a827d MIPS: Lantiq: Add DMA support
This patch adds support for the DMA engine found inside the XWAY family of
SoCs. The engine has 5 ports and 20 channels.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2355/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:43 +01:00
John Crispin e47d488935 MIPS: Lantiq: Add PCI controller support.
The Lantiq family of SoCs have a EBU (External Bus Unit). This patch adds
the driver that allows us to use the EBU as a PCI controller. In order for
PCI to work the EBU is set to endianess swap all the data. In addition we
need to make use of SWAP_IO_SPACE for device->host DMA to work.

The clock of the PCI works in several modes (internal/external). If this
is not configured correctly the SoC will hang.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2250/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:42 +01:00
John Crispin 8ec6d93508 MIPS: Lantiq: add SoC specific code for XWAY family
Add support for the Lantiq XWAY family of Mips24KEc SoCs.

* Danube (PSB50702)
* Twinpass (PSB4000)
* AR9 (PSB50802)
* Amazon SE (PSB5061)

The Amazon SE is a lightweight SoC and has no PCI as well as a different
clock. We split the code out into seperate files to handle this.

The GPIO pins on the SoCs are multi function and there are several bits
we can use to configure the pins. To be as compatible as possible to
GPIOLIB we add a function

int lq_gpio_request(unsigned int pin, unsigned int alt0,
        unsigned int alt1, unsigned int dir, const char *name);

which lets you configure the 2 "alternate function" bits. This way drivers like
PCI can make use of GPIOLIB without a cubersome wrapper.

The PLL code inside arch/mips/lantiq/xway/clk-xway.c is voodoo to me. It was
taken from a 2.4.20 source tree and was never really changed by me since then.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2249/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:41 +01:00
John Crispin 171bb2f19e MIPS: Lantiq: Add initial support for Lantiq SoCs
Add initial support for Mips based SoCs made by Lantiq. This series will add
support for the XWAY family.

The series allows booting a minimal system using a initramfs or NOR. Missing
drivers and support for Amazon and GPON family will be provided in a later
series.

[Ralf: Remove some cargo cult programming and fixed formatting.]

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2252/
Patchwork: https://patchwork.linux-mips.org/patch/2371/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:41 +01:00
Jayachandran C 9b130f8004 MIPS: XLR, XLS: Add PCI support.
Adds pci/pci-xlr.c to support for XLR PCI/PCI-X interface and XLS PCIe
interface.
Update irq.c to ack PCI interrupts, use irq handler data to do the
PCI/PCIe bus ack.

Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2337/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:41 +01:00
Jayachandran C 5c64250674 MIPS: Platform files for XLR/XLS processor support
* include/asm/netlogic added with files common for all Netlogic processors
  (common with XLP which will be added later)
* include/asm/netlogic/xlr for XLR/XLS chip specific files
* netlogic/xlr for XLR/XLS platform files

Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2334/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:40 +01:00
Jayachandran C efa0f81c11 MIPS: Netlogic: Cache, TLB support and feature overrides for XLR
CPU_XLR case added to mm/tlbex.c
CPU_XLR case added to mm/c-r4k.c for PINDEX attribute
Feature overrides for XLR cpu.

Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2333/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:40 +01:00
Jayachandran C 3c595a515d MIPS: Netlogic: mach-netlogic include files
Add war.h and irq.h with XLR/XLS definitions.

Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2331/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:39 +01:00
Jayachandran C a7117c6bdd MIPS: Netlogic XLR/XLS processor IDs.
Add Netlogic Microsystems company ID and processor IDs for XLR
and XLS processors for CPU probe. Add CPU_XLR to cpu_type_enum.

Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com>
Cc:     linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2367/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-19 09:55:39 +01:00
Ralf Baechle a5602a3273 MIPS: Kludge IP27 build for 2.6.39.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-18 14:18:27 +01:00
Thomas Gleixner a18f22a968 Merge branch 'consolidate-clksrc-i8253' of master.kernel.org:~rmk/linux-2.6-arm into timers/clocksource
Conflicts:
	arch/ia64/kernel/cyclone.c
	arch/mips/kernel/i8253.c
	arch/x86/kernel/i8253.c

Reason: Resolve conflicts so further cleanups do not conflict further

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-14 12:06:36 +02:00
Russell King 798778b865 clocksource: convert mips to generic i8253 clocksource
Convert MIPS i8253 clocksource code to use generic i8253 clocksource.

Acked-by: John Stultz <john.stultz@linaro.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-14 10:29:48 +01:00
Grant Likely 85f60ae4ee dt/flattree: explicitly pass command line pointer to early_init_dt_scan_chosen
This patch drops the reference to a global 'cmd_line' variable from
early_init_dt_scan_chosen, and instead passes the pointer to the command
line string via the *data argument.  Each architecture does something
slightly different with the initial command line, so it makes sense for
the architecture to be able to specify the variable name.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-05-11 14:53:18 +02:00
David Daney 310f130339 MIPS: Invalidate old TLB mappings when updating huge page PTEs.
Without this, stale Icache or TLB entries may be used.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
https://patchwork.linux-mips.org/patch/2318/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10 18:15:26 +01:00
Jonas Gorski 7da34c1dac MIPS: bcm63xx: Fix header_crc comment in bcm963xx_tag.h
The CRC32 actually includes the tag_version.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2275/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10 18:15:24 +01:00
Catalin Marinas f8bec75acd MIPS: Rename .data..mostly and properly handle it in linker script
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10 18:15:24 +01:00
Ralf Baechle 866d7f5622 MIPS: MSP: Fix build error
Reported and original patch by Yoichi Yuasa <yuasa@linux-mips.org>.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-05-10 18:15:24 +01:00
Ingo Molnar 32673822e4 Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core
Conflicts:
	include/linux/perf_event.h

Merge reason: pick up the latest jump-label enhancements, they are cooked ready.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-04-27 10:40:21 +02:00
Jiri Kosina 07f9479a40 Merge branch 'master' into for-next
Fast-forwarded to current state of Linus' tree as there are patches to be
applied for files that didn't exist on the old branch.
2011-04-26 10:22:59 +02:00
Justin P. Mattock 79add62773 update David Miller's old email address
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-04-06 06:19:38 -07:00
Jason Baron d430d3d7e6 jump label: Introduce static_branch() interface
Introduce:

static __always_inline bool static_branch(struct jump_label_key *key);

instead of the old JUMP_LABEL(key, label) macro.

In this way, jump labels become really easy to use:

Define:

        struct jump_label_key jump_key;

Can be used as:

        if (static_branch(&jump_key))
                do unlikely code

enable/disale via:

        jump_label_inc(&jump_key);
        jump_label_dec(&jump_key);

that's it!

For the jump labels disabled case, the static_branch() becomes an
atomic_read(), and jump_label_inc()/dec() are simply atomic_inc(),
atomic_dec() operations. We show testing results for this change below.

Thanks to H. Peter Anvin for suggesting the 'static_branch()' construct.

Since we now require a 'struct jump_label_key *key', we can store a pointer into
the jump table addresses. In this way, we can enable/disable jump labels, in
basically constant time. This change allows us to completely remove the previous
hashtable scheme. Thanks to Peter Zijlstra for this re-write.

Testing:

I ran a series of 'tbench 20' runs 5 times (with reboots) for 3
configurations, where tracepoints were disabled.

jump label configured in
avg: 815.6

jump label *not* configured in (using atomic reads)
avg: 800.1

jump label *not* configured in (regular reads)
avg: 803.4

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110316212947.GA8792@redhat.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Suggested-by: H. Peter Anvin <hpa@linux.intel.com>
Tested-by: David Daney <ddaney@caviumnetworks.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-04-04 12:48:08 -04:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
David Daney 0c3263870f MIPS: Octeon: Rewrite interrupt handling code.
This includes conversion to new style irq_chip functions, and
correctly enabling/disabling per-CPU interrupts.

The hardware interrupt bit to irq number mapping is now done with a
flexible map, instead of by bit twiddling the irq number.

[ tglx: Adjusted to new irq_cpu_on/offline callbacks and
        __irq_set_affinity_lock ]

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Cc: ralf@linux-mips.org
LKML-Reference: <1301081931-11240-5-git-send-email-ddaney@caviumnetworks.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:48:06 +02:00
Thomas Gleixner a458465641 MIPS: Fix syncfs syscall copy and paste failure
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:48:06 +02:00
Ralf Baechle 1bbf287561 MIPS: Wire up syncfs(2).
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25 18:45:20 +01:00
David Daney 84ed94323e MIPS: Hook up name_to_handle_at, open_by_handle_at and clock_adjtime syscalls.
These system calls we recently added.

32-bit ABIs need compat handling for sys_clock_adjtime().

o32 also needs compat handling for sys_open_by_handle_at();

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2165/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25 18:45:20 +01:00
Thomas Gleixner 930cd54b3b MIPS: SMTC: Cleanup the hook mess and use irq_data
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2194/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25 18:45:18 +01:00
Thomas Gleixner 7c8d948f16 MIPS: i8259: Convert to new irq_chip functions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2185/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25 18:45:16 +01:00
Anoop P A 786a5e0280 MIPS: MSP71xx: Add CPU feature override file.
Signed-off-by: Anoop P A <anoop.pa@gmail.com>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2045/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25 18:45:14 +01:00
Anoop P A ec9ac747be MIPS: MSP71xx: Platform support for On-chip MSP ethernet devices.
Some of MSP family SoC's come with legacy 100Mbps mspeth while some comes
with newer Gigabit TSMAC.Following patch adds platform support for both
types of MAC's.
If TSMAC is not selected assume platform having legacy mspeth.  Add
gpio_macros as well which is required for resetting the PHY.

[Ralf: Killed all typedefs.]

Signed-off-by: Anoop P A <anoop.pa@gmail.com>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2048/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25 18:45:14 +01:00
Anoop P A 5027070b3c MIPS: MSP71xx: Platform support for MSP on-chip USB controller.
Signed-off-by: Anoop P A <anoop.pa@gmail.com>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Cc: Anoop P A <anoop.pa@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/2043/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25 18:45:14 +01:00
Ralf Baechle 756cca61a7 MIPS: Microoptimize arch_{read,write}_lock
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-25 18:45:13 +01:00
FUJITA Tomonori 8547727756 remove dma64_addr_t
There is no user now.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: David Miller <davem@davemloft.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:47:18 -07:00
Akinobu Mita 61f2e7b0f4 bitops: remove minix bitops from asm/bitops.h
minix bit operations are only used by minix filesystem and useless by
other modules.  Because byte order of inode and block bitmaps is different
on each architecture like below:

m68k:
	big-endian 16bit indexed bitmaps

h8300, microblaze, s390, sparc, m68knommu:
	big-endian 32 or 64bit indexed bitmaps

m32r, mips, sh, xtensa:
	big-endian 32 or 64bit indexed bitmaps for big-endian mode
	little-endian bitmaps for little-endian mode

Others:
	little-endian bitmaps

In order to move minix bit operations from asm/bitops.h to architecture
independent code in minix filesystem, this provides two config options.

CONFIG_MINIX_FS_BIG_ENDIAN_16BIT_INDEXED is only selected by m68k.
CONFIG_MINIX_FS_NATIVE_ENDIAN is selected by the architectures which use
native byte order bitmaps (h8300, microblaze, s390, sparc, m68knommu,
m32r, mips, sh, xtensa).  The architectures which always use little-endian
bitmaps do not select these options.

Finally, we can remove minix bit operations from asm/bitops.h for all
architectures.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:46:22 -07:00
Akinobu Mita f312eff816 bitops: remove ext2 non-atomic bitops from asm/bitops.h
As the result of conversions, there are no users of ext2 non-atomic bit
operations except for ext2 filesystem itself.  Now we can put them into
architecture independent code in ext2 filesystem, and remove from
asm/bitops.h for all architectures.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:46:21 -07:00
Akinobu Mita 861b5ae7cd bitops: introduce little-endian bitops for most architectures
Introduce little-endian bit operations to the big-endian architectures
which do not have native little-endian bit operations and the
little-endian architectures.  (alpha, avr32, blackfin, cris, frv, h8300,
ia64, m32r, mips, mn10300, parisc, sh, sparc, tile, x86, xtensa)

These architectures can just include generic implementation
(asm-generic/bitops/le.h).

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Zankel <chris@zankel.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:46:15 -07:00
FUJITA Tomonori 3e50594e8e add the common dma_addr_t typedef to include/linux/types.h
All architectures can use the common dma_addr_t typedef now. We can
remove the arch specific dma_addr_t.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:09 -07:00
Eric Dumazet b6a84016bd mm: NUMA aware alloc_thread_info_node()
Add a node parameter to alloc_thread_info(), and change its name to
alloc_thread_info_node()

This change is needed to allow NUMA aware kthread_create_on_cpu()

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: David Howells <dhowells@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:01 -07:00
Linus Torvalds ec0afc9311 Merge branch 'kvm-updates/2.6.39' of git://git.kernel.org/pub/scm/virt/kvm/kvm
* 'kvm-updates/2.6.39' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (55 commits)
  KVM: unbreak userspace that does not sets tss address
  KVM: MMU: cleanup pte write path
  KVM: MMU: introduce a common function to get no-dirty-logged slot
  KVM: fix rcu usage in init_rmode_* functions
  KVM: fix kvmclock regression due to missing clock update
  KVM: emulator: Fix permission checking in io permission bitmap
  KVM: emulator: Fix io permission checking for 64bit guest
  KVM: SVM: Load %gs earlier if CONFIG_X86_32_LAZY_GS=n
  KVM: x86: Remove useless regs_page pointer from kvm_lapic
  KVM: improve comment on rcu use in irqfd_deassign
  KVM: MMU: remove unused macros
  KVM: MMU: cleanup page alloc and free
  KVM: MMU: do not record gfn in kvm_mmu_pte_write
  KVM: MMU: move mmu pages calculated out of mmu lock
  KVM: MMU: set spte accessed bit properly
  KVM: MMU: fix kvm_mmu_slot_remove_write_access dropping intermediate W bits
  KVM: Start lock documentation
  KVM: better readability of efer_reserved_bits
  KVM: Clear async page fault hash after switching to real mode
  KVM: VMX: Initialize vm86 TSS only once.
  ...
2011-03-17 18:40:35 -07:00
Linus Torvalds 4b0e976c66 Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  watchdog: booke_wdt: clean up status messages
  watchdog: cleanup spaces before tabs
  watchdog: convert to DEFINE_PCI_DEVICE_TABLE
  watchdog: Xen watchdog driver
  watchdog: Intel SCU Watchdog Timer Driver for Moorestown and Medfield platforms.
  watchdog: jz4740_wdt - fix magic character checking
  watchdog: add JZ4740 watchdog driver
  watchdog: it87_wdt: Add support for IT8721F watchdog
  watchdog: hpwdt: build hpwdt as module by default with NMI_DECODING enabled
  watchdog: hpwdt: Fix a couple of typos
2011-03-17 17:09:29 -07:00
Huang Ying 69ebb83e13 mm: make __get_user_pages return -EHWPOISON for HWPOISON page optionally
Make __get_user_pages return -EHWPOISON for HWPOISON page only if
FOLL_HWPOISON is specified.  With this patch, the interested callers
can distinguish HWPOISON pages from general FAULT pages, while other
callers will still get -EFAULT for all these pages, so the user space
interface need not to be changed.

This feature is needed by KVM, where UCR MCE should be relayed to
guest for HWPOISON page, while instruction emulation and MMIO will be
tried for general FAULT page.

The idea comes from Andrew Morton.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-03-17 13:08:27 -03:00
Linus Torvalds e6bee325e4 Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (76 commits)
  pch_uart: reference clock on CM-iTC
  pch_phub: add new device ML7213
  n_gsm: fix UIH control byte : P bit should be 0
  n_gsm: add a documentation
  serial: msm_serial_hs: Add MSM high speed UART driver
  tty_audit: fix tty_audit_add_data live lock on audit disabled
  tty: move cd1865.h to drivers/staging/tty/
  Staging: tty: fix build with epca.c driver
  pcmcia: synclink_cs: fix prototype for mgslpc_ioctl()
  Staging: generic_serial: fix double locking bug
  nozomi: don't use flush_scheduled_work()
  tty/serial: Relax the device_type restriction from of_serial
  MAINTAINERS: Update HVC file patterns
  tty: phase out of ioctl file pointer for tty3270 as well
  tty: forgot to remove ipwireless from drivers/char/pcmcia/Makefile
  pch_uart: Fix DMA channel miss-setting issue.
  pch_uart: fix exclusive access issue
  pch_uart: fix auto flow control miss-setting issue
  pch_uart: fix uart clock setting issue
  pch_uart : Use dev_xxx not pr_xxx
  ...

Fix up trivial conflicts in drivers/misc/pch_phub.c (same patch applied
twice, then changes to the same area in one branch)
2011-03-16 15:11:04 -07:00
Linus Torvalds b80cd62b7d Merge branch 'core-futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  arm: Remove bogus comment in futex_atomic_cmpxchg_inatomic()
  futex: Deobfuscate handle_futex_death()
  plist: Add priority list test
  plist: Shrink struct plist_head
  futex,plist: Remove debug lock assignment from plist_node
  futex,plist: Pass the real head of the priority list to plist_del()
  futex: Sanitize futex ops argument types
  futex: Sanitize cmpxchg_futex_value_locked API
  futex: Remove redundant pagefault_disable in futex_atomic_cmpxchg_inatomic()
  futex: Avoid redudant evaluation of task_pid_vnr()
  futex: Update futex_wait_setup comments about locking
2011-03-15 18:23:52 -07:00
Paul Cercueil f865c35224 watchdog: add JZ4740 watchdog driver
Adds support for the hardware watchdog found in Ingenic's jz4740
System-on-Chip.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-03-15 16:01:44 +00:00
Deng-Cheng Zhu 91f017372a MIPS, Perf-events: Work with irq_work
This is the MIPS part of the following commit by Peter Zijlstra:

- e360adbe29
    irq_work: Add generic hardirq context callbacks

    Provide a mechanism that allows running code in IRQ context. It is
    most useful for NMI code that needs to interact with the rest of the
    system -- like wakeup a task to drain buffers.

    Perf currently has such a mechanism, so extract that and provide it as
    a generic feature, independent of perf so that others may also
    benefit.

    The IRQ context callback is generated through self-IPIs where
    possible, or on architectures like powerpc the decrementer (the
    built-in timer facility) is set to generate an interrupt immediately.

    Architectures that don't have anything like this get to do with a
    callback from the timer tick. These architectures can call
    irq_work_run() at the tail of any IRQ handlers that might enqueue such
    work (like the perf IRQ handler) to avoid undue latencies in
    processing the work.

For MIPSXX, we need to call irq_work_run() at the tail of the perf IRQ
handler as described above.

Reported-by: Wu Zhangjin <wuzhangjin@gmail.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: fweisbec@gmail.com
To: will.deacon@arm.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: matt@console-pimps.org
Cc: sshtylyov@mvista.com,
Patchwork: http://patchwork.linux-mips.org/patch/2011/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-03-14 21:07:26 +01:00
Michel Lespinasse 8d7718aa08 futex: Sanitize futex ops argument types
Change futex_atomic_op_inuser and futex_atomic_cmpxchg_inatomic
prototypes to use u32 types for the futex as this is the data type the
futex core code uses all over the place.

Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Darren Hart <darren@dvhart.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20110311025058.GD26122@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-11 12:23:31 +01:00
Michel Lespinasse 37a9d912b2 futex: Sanitize cmpxchg_futex_value_locked API
The cmpxchg_futex_value_locked API was funny in that it returned either
the original, user-exposed futex value OR an error code such as -EFAULT.
This was confusing at best, and could be a source of livelocks in places
that retry the cmpxchg_futex_value_locked after trying to fix the issue
by running fault_in_user_writeable().
    
This change makes the cmpxchg_futex_value_locked API more similar to the
get_futex_value_locked one, returning an error code and updating the
original value through a reference argument.
    
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>  [tile]
Acked-by: Tony Luck <tony.luck@intel.com>  [ia64]
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michal Simek <monstr@monstr.eu>  [microblaze]
Acked-by: David Howells <dhowells@redhat.com> [frv]
Cc: Darren Hart <darren@dvhart.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20110311024851.GC26122@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-11 12:23:08 +01:00
John Stultz 75c4fd8c78 mips: convert to clocksource_register_hz/khz
This converts the mips clocksources to use clocksource_register_hz/khz

CC: Ralf Baechle <ralf@linux-mips.org>
CC: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Stultz <johnstul@us.ibm.com>
2011-02-21 13:33:50 -08:00
Kay Sievers 3c95c985fa tty: add TIOCVHANGUP to allow clean tty shutdown of all ttys
This is useful for system management software so that it can kick
off things like gettys and everything that's started from a tty,
before we reuse it from/for something else or shut it down.

Without this ioctl it would have to temporarily become the owner of
the tty, then call vhangup() and then give it up again.

Cc: Lennart Poettering <lennart@poettering.net>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17 14:16:30 -08:00
David Daney 1befdd5536 MIPS: Implement __read_mostly
Just do what everyone else is doing by placing __read_mostly things in
the .data.read_mostly section.

mips_io_port_base can not be read-only (const) and writable
(__read_mostly) at the same time.  One of them has to go, so I chose
to eliminate the __read_mostly.  It will still get stuck in a portion
of memory that is not adjacent to things that are written, and thus
not be on a dirty cache line, for whatever that is worth.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1702/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18 19:30:28 +01:00
Gabor Juhos f5b35d0b16 MIPS: ath79: add common WMAC device for AR913X based boards
Add common platform_device and helper code to make the registration
of the built-in wireless MAC easier on the Atheros AR9130/AR9132
based boards. Also register the WMAC device on the AR81 board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Imre Kaloz <kaloz@openwrt.org>,
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1962/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18 19:30:28 +01:00
Gabor Juhos 68a1d31636 MIPS: ath79: add common SPI controller device
Several boards are using the built-in SPI controller of the
AR71XX/AR724X/AR913X SoCs. This patch adds common platform_device
and helper code to register it. Additionally, the patch registers
the SPI bus on the PB44 board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1956/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18 19:30:27 +01:00
Gabor Juhos 8efaef4dc8 SPI: Add SPI controller driver for the Atheros AR71XX/AR724X/AR913X SoCs
The Atheros AR71XX/AR724X/AR913X SoCs have a built-in SPI controller. This
patch implements a driver for that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: spi-devel-general@lists.sourceforge.net
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: linux-mips@linux-mips.org
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1960/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18 19:30:27 +01:00
Gabor Juhos 6eae43c57e MIPS: ath79: add GPIOLIB support
This patch implements generic GPIO routines for the built-in
GPIO controllers of the Atheros AR71XX/AR724X/AR913X SoCs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: linux-mips@linux-mips.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1948/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18 19:30:25 +01:00
Gabor Juhos d4a67d9dc8 MIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCs
This patch adds initial support for various Atheros SoCs based on the
MIPS 24Kc core. The following models are supported at the moment:

  - AR7130
  - AR7141
  - AR7161
  - AR9130
  - AR9132
  - AR7240
  - AR7241
  - AR7242

The current patch contains minimal support only, but the resulting
kernel can boot into user-space with using of an initramfs image on
various boards which are using these SoCs. Support for more built-in
devices and individual boards will be implemented in further patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1947/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18 19:30:24 +01:00
David Daney 94bb0c1ab2 MIPS: jump label: Add MIPS support.
In order not to be left behind, we add jump label support for MIPS.

Tested on 64-bit big endian (Octeon), and 32-bit little endian
(malta/qemu).

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@redhat.com>
Patchwork: https://patchwork.linux-mips.org/patch/1923/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18 19:30:24 +01:00
David Daney bb3d68c30a MIPS: Add LDX and LWX instructions to uasm.
Needed by Octeon II optimized TLB handlers.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Pachwork: https://patchwork.linux-mips.org/patch/1903/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18 19:30:23 +01:00
David Daney afc7c9864a MIPS: Declare uasm bbit0 and bbit1 functions.
these are already defined, but declaring them allow them to be used
outside of uasm.c.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1872/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-01-18 19:30:22 +01:00