Commit Graph

568 Commits

Author SHA1 Message Date
Takashi Sakamoto b164d2fd6e ALSA: firewire_lib: add tracepoints for packets without CIP headers
Unique protocol is used for RME Fireface series. In this protocol,
payload format for isochronous packet is not compliant to CIP in
IEC 61883-1/6. The packet includes data blocks just with data channels,
without headers and any metadata.

In previous commits, ALSA IEC 61883-1/6 engine supports this protocol.
However, tracepoints are not supported yet, unlike implementation for
IEC 61883-1/6 protocol. This commit adds support of tracepoints for
the protocol.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-11 08:30:43 +02:00
Takashi Sakamoto 7e1621de14 ALSA: firewire-lib/bebob/oxfw: improve response evaluation for AV/C commands
In ALSA firewire stack, some AV/C commands are supported, including
vendor's extensions. Drivers includes response parser of each command,
according to its requirements, while the parser is written with loose
fashion in two points; error check and length check. This doesn't cause
any issues such as kernel corruption, but should be improved.

This commit modifies evaluations of return value on each parsers.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:37:23 +02:00
Takashi Sakamoto 5b33504bad ALSA: firewire-motu: remove invalid bitshift for register value
In protocol version 3, drivers can read current sampling clock status from
register 0x'ffff'f000'0b14. 8 bits of LSB of this register represents type
of signal as source of clock.

Current driver code includes invalid bitshift to handle the parameter. This
commit fixes the bug.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 5992e30034 ("ALSA: firewire-motu: add support for MOTU 828mk3 (FireWire/Hybrid) as a model with protocol version 3")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:36:11 +02:00
Takashi Sakamoto 3d016d57fd ALSA: oxfw: fix regression to handle Stanton SCS.1m/1d
At a commit 6c29230e2a ("ALSA: oxfw: delayed registration of sound
card"), ALSA oxfw driver fails to handle SCS.1m/1d, due to -EBUSY at a call
of snd_card_register(). The cause is that the driver manages to register
two rawmidi instances with the same device number 0. This is a regression
introduced since kernel 4.7.

This commit fixes the regression, by fixing up device property after
discovering stream formats.

Fixes: 6c29230e2a ("ALSA: oxfw: delayed registration of sound card")
Cc: <stable@vger.kernel.org> # 4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:35:14 +02:00
Takashi Sakamoto fdb2b2eee6 ALSA: firewire-digi00x: remove transaction handler for unknown purpose
For digi00x series, asynchronous transaction is not used to transfer MIDI
messages to/from control surface. One of transction handlers in my previous
work loses its practical meaning.

This commit removes the handler. I note that unit of console type
transfers 0x00001000 to registered address of host space when switching
to 'standalone' mode. Then the unit generates bus reset.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:34:13 +02:00
Takashi Sakamoto 0c3f15f39c ALSA: firewire-digi00x: allow user space applications to read/write MIDI messages for all ports
At a commit c5fcee0373 ("ALSA: firewire-digi00x: add MIDI operations for
MIDI control port"), I described that MIDI messages for control surface is
transferred by a different way from the messages for physical ports.
However, this is wrong. MIDI messages to/from all of MIDI ports are
transferred by isochronous packets.

This commit removes codes to transfer MIDI messages via asynchronous
transaction, from MIDI handling layer.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:34:11 +02:00
Takashi Sakamoto 8820a4cf0c ALSA: firewire-digi00x: handle all MIDI messages on streaming packets
At a commit 9dc5d31cdc ("ALSA: firewire-digi00x: handle MIDI messages in
isochronous packets"), a functionality to handle MIDI messages on
isochronous packet was supported. But this includes some of my
misunderstanding. This commit is to fix them.

For digi00x series, first data channel of data blocks in rx/tx packet
includes MIDI messages. The data channel has 0x80 in 8 bit of its MSB,
however it's against IEC 61883-6. Unique data format is applied:
 - Upper 4 bits of LSB represent port number.
  - 0x0: port 1.
  - 0x2: port 2.
  - 0xe: console port.
 - Lower 4 bits of LSB represent the number of included MIDI message bytes;
   0x0/0x1/0x2.
 - Two bytes of middle of this data channel have MIDI bytes.

Especially, MIDI messages from/to console surface are also transferred by
isochronous packets, as well as physical MIDI ports.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:34:10 +02:00
Takashi Sakamoto 13e005f9f9 ALSA: firewire-digi00x: add support for console models of Digi00x series
Digi00x series includes two types of unit; rack and console. As long as
reading information on config rom of Digi 002 console, 'MODEL_ID' field
has a different value from the one on Digi 002 rack.

We've already got a test report from users with Digi 003 rack. We can
assume that console type and rack type has different value in the field.

This commit adds a device entry for console type. For following commits,
this commit also adds a member to 'struct snd_digi00x' to identify console
type.

$ cd linux-firewire-utils/src
$ python2 ./crpp < /sys/bus/firewire/devices/fw1/config_rom
               ROM header and bus information block
               -----------------------------------------------------------------
400  0404f9d0  bus_info_length 4, crc_length 4, crc 63952
404  31333934  bus_name "1394"
408  60647002  irmc 0, cmc 1, isc 1, bmc 0, cyc_clk_acc 100, max_rec 7 (256)
40c  00a07e00  company_id 00a07e     |
410  00a30000  device_id 0000a30000  | EUI-64 00a07e0000a30000

               root directory
               -----------------------------------------------------------------
414  00058a39  directory_length 5, crc 35385
418  0c0043a0  node capabilities
41c  04000001  hardware version
420  0300a07e  vendor
424  81000007  --> descriptor leaf at 440
428  d1000001  --> unit directory at 42c

               unit directory at 42c
               -----------------------------------------------------------------
42c  00046674  directory_length 4, crc 26228
430  120000a3  specifier id
434  13000001  version
438  17000001  model
43c  81000007  --> descriptor leaf at 458

               descriptor leaf at 440
               -----------------------------------------------------------------
440  00055913  leaf_length 5, crc 22803
444  000050f2  descriptor_type 00, specifier_ID 50f2
448  80000000
44c  44696769
450  64657369
454  676e0000

               descriptor leaf at 458
               -----------------------------------------------------------------
458  0004a6fd  leaf_length 4, crc 42749
45c  00000000  textual descriptor
460  00000000  minimal ASCII
464  44696769  "Digi"
468  20303032  " 002"

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:34:08 +02:00
Takashi Sakamoto 76fdb3a9e1 ALSA: fireface: add support for Fireface 400
Fireface 400 is a second model of RME Fireface series, released in 2006.
This commit adds support for this model.

This model supports 8 analog channels, 2 S/PDIF channels and 8 ADAT
channels in both of tx/rx packet. The number of ADAT channels differs
depending on each mode of sampling transmission frequency.

$ python2 linux-firewire-utils/src/crpp < /sys/bus/firewire/devices/fw1/config_rom
               ROM header and bus information block
               -----------------------------------------------------------------
400  04107768  bus_info_length 4, crc_length 16, crc 30568 (should be 61311)
404  31333934  bus_name "1394"
408  20009002  irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 9 (1024)
40c  000a3501  company_id 000a35     |
410  1bd0862a  device_id 011bd0862a  | EUI-64 000a35011bd0862a

               root directory
               -----------------------------------------------------------------
414  000485ec  directory_length 4, crc 34284
418  03000a35  vendor
41c  0c0083c0  node capabilities per IEEE 1394
420  8d000006  --> eui-64 leaf at 438
424  d1000001  --> unit directory at 428

               unit directory at 428
               -----------------------------------------------------------------
428  000314c4  directory_length 3, crc 5316
42c  12000a35  specifier id
430  13000002  version
434  17101800  model

               eui-64 leaf at 438
               -----------------------------------------------------------------
438  000261a8  leaf_length 2, crc 25000
43c  000a3501  company_id 000a35     |
440  1bd0862a  device_id 011bd0862a  | EUI-64 000a35011bd0862a

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:54 +02:00
Takashi Sakamoto f656edd5fb ALSA: fireface: add hwdep interface
This commit adds hwdep interface so as the other drivers for audio and
music units on IEEE 1394 have.

This interface is designed for mixer/control applications. By using this
interface, an application can get information about firewire node, can
lock/unlock kernel streaming and can get notification at starting/stopping
kernel streaming.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:49 +02:00
Takashi Sakamoto 4b316436ab ALSA: fireface: add support for PCM functionality
This commit adds PCM functionality to transmit/receive PCM frames on
isochronous packet streaming. This commit enables userspace applications
to start/stop packet streaming via ALSA PCM interface.

Sampling rate requested by applications is used as sampling transmission
frequency of IEC 61883-1/6packet streaming. As I described in followed
commits, units in this series manages sampling clock frequency
independently of sampling transmission frequency, and they supports
resampling between their packet streaming/data block processing layer and
sampling data processing layer. This commit take this driver to utilize
these features for usability.

When internal clock is selected as source signal of sampling clock, this
driver allows user space applications to start PCM substreams at any rate
which packet streaming engine supports as sampling transmission frequency.
In this case, this driver expects units to perform resampling PCM frames
for rx/tx packets when sampling clock frequency and sampling transmission
frequency are mismatched. This is for daily use cases.

When any external clock is selected as the source signal, this driver
gets configured sampling rate from units, then restricts available
sampling rate to the rate for PCM applications. This is for studio use
cases.

Models in this series supports 64.0/128.0 kHz of sampling rate, however
these frequencies are not supported by IEC 61883-6 as sampling transmission
frequency. Therefore, packet streaming engine of ALSA firewire stack can't
handle them. When units are configured to use any external clock as source
signal of sampling clock and one of these unsupported rate is configured
as rate of the sampling clock, this driver returns EIO to user space
applications.

Anyway, this driver doesn't voluntarily configure parameters of sampling
clock. It's better for users to work with appropriate user space
implementations to configure the parameters in advance of usage.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:46 +02:00
Takashi Sakamoto 75d6d89897 ALSA: fireface: add stream management functionality
This commit adds management functionality for packet streaming.

As long as investigating Fireface 400, there're three modes depending
on sampling transmission frequency. The number of data channels in each
data block is different depending on the mode. The set of available
data channels for each mode might be different for each protocol and
model.

The length of registers for the number of isochronous channel is just
three bits, therefore 0-7ch are available.

When bus reset occurs on IEEE 1394 bus, the device discontinues to
transmit packets. This commit aborts PCM substreams at bus reset handler.

As I described in followed commits, The device manages its sampling clock
independently of sampling transmission frequency against IEC 61883-6.
Thus, it's a lower cost to change the sampling transmission frequency,
while data fetch between streaming layer and DSP require larger buffer
for resampling. As a result, device latency might tend to be larger than
ASICs for IEC 61883-1/6 such as DM1000/DM1100/DM1500 (BeBoB),
DiceII/TCD2210/TCD2220/TCD3070 and OXFW970/971.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:44 +02:00
Takashi Sakamoto 6fb7db902b ALSA: fireface: add unique data processing layer
As long as investigating Fireface 400, format of payload of each
isochronous packet is not IEC 61883-1/6, thus its format of data block
is not AM824. The remarkable points of the format are:
 * The payload just consists of some data channels of quadlet size without
   CIP header.
 * Each data channels includes data aligned to little endian order.
 * One data channel consists of two parts; 8 bit ancillary field and 24 bit
   PCM frame.

Due to lack of CIP headers, rx/tx packets include no CIP headers and
different way to check packet discontinuity. For tx packet, the ancillary
field is used for counter. However, the way of counting is different
depending on positions of data channels. At 44.1 kHz, ancillary field in:
 * 1st/6th/9th/10th/14th/17th data channels: not used for this purpose.
 * 2nd/18th data channels: incremented every data block (0x00-0xff).
 * 3rd/4th/5th/11th/12th/13th data channels: incremented every 256 data
   blocks (0x00-0x07).
 * 7th/8th/15th/16th data channels: incremented per the number of data
   blocks in a packet. The increment can occur per packet (0x00-0xff).

For tx packet, tag of each isochronous packet is used for this purpose.
The value of tag cyclically changes between 0, 1, 2 and 3 in this order.
The interval is different depending on sampling transmission frequency.
At 44.1/48.0 kHz, it's 256 data blocks. At 88.2 kHz, it's 96 data blocks.

The number of data blocks in tx packet is exactly the same as
SYT_INTERVAL. There's no empty packet or no-data packet, thus the
throughput is not 8,000 packets per sec. On the other hand, the one in
rx packet is 8,000 packets per sec, thus the number of data blocks is
different between each packet, depending on sampling transmission
frequency:
 * 44.1 kHz: 5 or 6
 * 48.0 kHz: 5 or 6 or 7
 * 88.2 kHz: 10 or 11 or 12

This commit adds data processing layer to satisfy the above specification
in a policy of 'best effort'. Although PCM frames are handled for
intermediate buffer to user space, the ancillary data is not handled at all
to reduce CPU usage, thus counter is not checked. 0 is always used for tag
of isochronous packet. Furthermore, the packet streaming layer is
responsible for calculation of the number of data blocks for each packet,
thus it's not exactly the same sequence from the above observation.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:42 +02:00
Takashi Sakamoto 3b196c394d ALSA: firewire-lib: add no-header packet processing
As long as investigating Fireface 400, IEC 61883-1/6 is not applied to
its packet streaming protocol. Remarks of the specific protocol are:
 * Each packet doesn't include CIP headers.
 * 64,0 and 128,0 kHz are supported.
 * The device doesn't necessarily transmit 8,000 packets per second.
 * 0, 1, 2, 3 are used as tag for rx isochronous packets, however 0 is
   used for tx isochronous packets.

On the other hand, there's a common feature. The number of data blocks
transferred in a second is the same as sampling transmission frequency.
Current ALSA IEC 61883-1/6 engine already has a method to calculate it and
this driver can utilize it for rx packets, as well as tx packets.

This commit adds support for the transferring protocol. CIP_NO_HEADERS
flag is newly added. When this flag is set:
 * Both of 0 (without CIP header) and 1 (with CIP header) are used as tag
   to handle incoming isochronous packet.
 * 0 (without CIP header) is used as tag to transfer outgoing isochronous
   packet.
 * Skip CIP header evaluation.
 * Use unique way to calculate the quadlets of isochronous packet payload.

In ALSA PCM interface, 128.0 kHz is not supported, and the ALSA
IEC 61883-1/6 engine doesn't support 64.0 kHz. These modes are dropped.

The sequence of rx packet has a remarkable quirk about tag. This will be
described in later commits.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:40 +02:00
Takashi Sakamoto ff0fb5aaa8 ALSA: firewire-lib: use the same prototype for functions to handle packet
Audio and music units of RME Fireface series use its own protocol for
isochronous packets to transfer data. This protocol requires ALSA IEC
61883-1/6 engine to have alternative functions.

This commit is a preparation for the protocol.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:38 +02:00
Takashi Sakamoto d3fc7aac11 ALSA: fireface: add proc node to help debugging
Drivers can retrieve the state and configuration of clock by read
transactions.

This commit allows protocol abstraction layer to to dump the
information for debugging, via proc interface.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:36 +02:00
Takashi Sakamoto ff2c293efa ALSA: fireface: add support for MIDI functionality
In previous commit, fireface driver supports unique transaction mechanism
for MIDI feature. This commit adds MIDI functionality for userspace
applications.

As I wrote in a followed commit, user space applications get some
requirement from this driver. It should not touch a register to which
units transmit MIDI messages. It should configure a register in which
MIDI transmission is controlled.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:34 +02:00
Takashi Sakamoto 1917429578 ALSA: fireface: add transaction support
As long as investigating Fireface 400, MIDI messages are transferred by
asynchronous communication over IEEE 1394 bus.

Fireface 400 receives MIDI messages by write transactions to two addresses;
0x'0000'0801'8000 and 0x'0000'0801'9000. Each of two seems to correspond to
MIDI port 1 and 2.

Fireface 400 transfers MIDI messages by write transactions to certain
addresses which configured by drivers. The drivers can decide upper 4 byte
of the addresses by write transactions to 0x'0000'0801'03f4. For the rest
part of the address, drivers can select from below options:
 * 0x'0000'0000
 * 0x'0000'0080
 * 0x'0000'0100
 * 0x'0000'0180

Selected options are represented in register 0x'0000'0801'051c as bit
flags. Due to this mechanism, drivers are restricted to use addresses on
'Memory space' of IEEE 1222, even if transactions to the address have
some side effects.

This commit adds transaction support for MIDI messaging, based on my
assumption that the similar mechanism is used on the other protocols. To
receive asynchronous transactions, the driver allocates a range of address
in 'Memory space'. I apply a strategy to use 0x'0000'0000 as lower 4 byte
of the address. When getting failure from Linux FireWire subsystem, this
driver retries to allocate addresses.

Unfortunately, read transaction to address 0x'0000'0801'051c returns zero
always, however write transactions have effects to the other features such
as status of sampling clock. For this reason, this commit delegates a task
to configure this register to user space applications. The applications
should set 3rd bit in LSB in little endian order.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:31 +02:00
Takashi Sakamoto 53eb086750 ALSA: fireface: add an abstraction layer for model-specific protocols
As of 2016, RME discontinued its Fireface series, thus it's OK for us
to focus on released firmwares to drive known units.

As long as investigating Fireface 400 with Windows driver and comparing
the result to FFADO implementation, I can see these firmwares have
different register assignments. On the other hand, according to manuals
of each models, features relevant to packet streaming seem to be common,
because GUIs for these models have the same options. It's reasonable to
assume an abstraction layer of protocols to communicate to each models.

This commit adds the abstraction layer for the protocols. This layer
includes some functions to operate common features of models in this
series.

In IEC 61883-1/6, the sequence of packet can transfer timing information
to synchronize receivers to transmitters. Units of each node on IEEE 1394
bus can generate transmitter's timing clock by handling value of SYT field
in CIP header with high-precision clock. For audio and music units on
IEEE 1394 bus, this recovered clock is designed to used for sampling clock
to capture/generate PCM frames on DSP/ADC/DAC. (Actually, in this world,
there's no units to implement this specification as is, as long as I
know).

Fireface series doesn't use this mechanism. Besides, It doesn't use
isochronous packet with CIP header. It uses internal crystal unit as its
initial sampling clock. When detecting input signals which can be
available for sampling clock (e.g. ADAT input), drivers can configure
units to use the signals as source of sampling clock. When something goes
wrong, e.g. frequency mismatching between the signal and configured value,
units fallback to the other detected signals alternatively. When detecting
no alternatives, internal crystal unit is used as source of sampling
clock. On manual of Fireface 400, this mechanism is described as
'Autosync'.

On the units, packet streaming is controlled by write transactions to
certain registers. Format of the packet, e.g. the number of data channels
in a data block, is also configured by the same manner. For this purpose,
.begin_session and .finish_session is added.

The remarkable point of this protocol is to allow drivers to configure
arbitrary sampling transmission frequency; e.g. 12.345 Hz. As long as I
know, there's no actual DAC/ADC chips which support this kind of
capability. I think a pair of packet streaming layer and data block
processing layer is isolated from sampling data processing layer in a
point of governed clock. In short, between these parts, resampling layer
exists. Actually, for Fireface 400, write transactions to
0x'0000'8010'051c has an effect to change sampling clock frequency with
base frequencies (32.0/44.1/48.0 kHz) and its multipliers (x2/x4),
regardless of sampling transmission frequency.

For this reason, the abstraction layer doesn't handle parameters for
sampling clock. Instead, each implementation of .begin_session is
expected to configure sampling transmission frequency.

For packet streaming layer, it's enough to get current selection of
source signals for the sampling clock and its frequency. In the
abstraction layer, when internal crystal is selected, drivers can sets
arbitrary sampling frequency, else they should follow configured
frequency. For this purpose, .get_clock is added.

Drivers are allows to bank up data fetching from a pair of packet
streaming/data block processing layer and sampling data processing layer.
This feature seems to suppress noises at starting/stopping packet
streaming. For this purpose, .switch_fetching_mode is added.

As I described in the above, units have remarkable mechanism to manage
sampling clock and process sampling data. For debugging purpose,
.dump_sync_status and .dump_clock_config are added. I don't have a need
to common interface to represent the status and configuration,
developers can add actual implementation of the abstraction layer as they
like.

Unlike PCM frames, MIDI messages are transferred by asynchronous
communication over IEEE 1394 bus, thus target addresses are important for
this feature. The .midi_high_addr_reg, .midi_rx_port_0_reg and
.midi_rx_port_1_reg are for this purpose. I'll describe them in following
commit.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:30 +02:00
Takashi Sakamoto ed90f91a17 ALSA: fireface: add model specific structure
RME Fireface series has several models and their specifications are
different. Currently, we find no way to retrieve the specifications
from actual devices and need to implement them in this driver.

This commit adds a structure to describe model specific data. This
structure has an identical name for each unit, and maximum number of
data channels in each mode. I'll describe about the mode in following
commits.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:28 +02:00
Takashi Sakamoto 324540c4e0 ALSA: fireface: postpone sound card registration
Just after appearing on IEEE 1394 bus, this unit generates several bus
resets. This is due to loading firmware from on-board flash memory and
initialize hardware. It's better to postpone sound card registration.

This commit schedules workqueue to process actual probe processing
2 seconds after the last bus-reset. The card instance is kept at unit
probe callback and released at card free callback. Therefore, when the
actual probe processing fails, the memory block is wasted. This is due to
simplify driver implementation.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:26 +02:00
Takashi Sakamoto 17c4e5eadc ALSA: fireface: add skeleton for RME Fireface series
This commit adds a new driver for RME Fireface series. This commit just
creates/removes card instance according to IEEE 1394 bus event. More
functions will be added in following commits.

Three types of firmware have released by RME GmbH; for Fireface 400, for
Fireface 800 and for UCX/802/UFX. It's reasonable that these models use
different protocol for communication. Currently, I've investigated
Fireface 400 and nothing others.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:24 +02:00
Takashi Sakamoto 5992e30034 ALSA: firewire-motu: add support for MOTU 828mk3 (FireWire/Hybrid) as a model with protocol version 3
MOTU 828mk3 (FireWire/Hybrid) is one of third generation in MOTU FireWire
series, produced in 2008/2014. This model consists of three chips for
functionality on IEEE 1394 bus:

 * TI TSB41AB2 (Physical layer for IEEE 1394 bus)
 * Xilinx Spartan-3E FPGA Family (Link layer for IEEE 1394 bus, packet
   processing and data block processing layer)
 * TI TMS320C6722 (Digital signal processing)

This commit adds a support for this model, with its unique protocol as
version 3. This protocol has some additional features to protocol
version 2.

 * Support several optical interfaces.
 * Support a data chunk for return of reverb effect.
 * Have a quirk of tx packets.
 * Support heartbeat asynchronous transaction.

In this protocol, series of transferred packets has some quirks. Below
fields in CIP headers of the packets are out of IEC 61883-1:
 - SID (source node id): always 0x0d
 - DBS (data block size): always 0x04
 - DBC (data block counter): always 0x00
 - EOH (End of header): always 0x00

Below is an actual sample of transferred packets.

quads CIP1       CIP2
520   0x0D040400 0x22FFFFFF
  8   0x0D040400 0x22FFFFFF
520   0x0D040400 0x22FFFFFF
520   0x0D040400 0x22FFFFFF
  8   0x0D040400 0x22FFFFFF

Status of clock is configured by write transactions to 0x'ffff'f000'0b14,
as well as version 2, while meanings of fields are different from the
former protocols. Modes of optical interfaces are configured by write
transactions to 0x'ffff'f000'0c94.

Drivers can register its address to receive heatbeat transactions from the
unit. 0x'ffff'f000'0b0c is for the higher part and 0x'ffff'f000'0b10 is
for the lower part. Nevertheless, this feature is not useless for this
driver and this commit omits it.

Each data block consists of two parts in a point of the number of included
data chunks. In both of 'fixed' and 'differed' parts, the number of
included data blocks are a multiple of 4, thus depending on models there's
some empty data chunks. For example, 828mk3 includes one pair of empty
data chunks in its fixed part. When optical interface is configured to
S/PDIF, 828mk3 includes one pair of empty data chunks in its differed part.
To reduce consumption of CPU cycles with additional conditions/loops, this
commit just exposes these empty chunks to user space as PCM channels.

Additionally, 828mk3 has a non-negligible overhead to change its sampling
transfer frequency. When softwares send asynchronous transaction to
perform it, LED on the unit starts to blink. In a worst case, it continues
blink during several seconds; e.g. 10 seconds. When stopping blinking,
the unit seems to be prepared for the requested sampling transfer
frequency. To wait for the preparation, this commit forces the driver
to call task scheduler and applications sleeps for 4 seconds.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:34:13 +02:00
Takashi Sakamoto 2128f78f75 ALSA: firewire-lib: add a quirk of packet without valid EOH in CIP format
In IEC 61883-1, when two quadlets CIP header is used, the most significant
bit in second CIP header stands. However, packets from units with MOTU
protocol version 3 have a quirk without this flag. Current packet streaming
layer handles this as protocol error.

This commit adds a new enumeration constant for this quirk, to handle MOTU
protocol version 3.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:34:11 +02:00
Takashi Sakamoto 949613e366 ALSA: firewire-motu: add support for MOTU 828mk2 as a model with protocol version 2
MOTU 828mk2 is one of second generation in MOTU FireWire series, produced in
2003. This model consists of four chips:
 * TI TSB41AB2 (Physical layer for IEEE 1394 bus)
 * PDI 1394L40BE (Link layer for IEEE 1394 bus and packet processing layer)
 * ALTERA ACEX 1K EP1K30 Series FPGA (Data block processing layer)
 * TI TMS320VC5402 (Digital signal processing)

This commit adds a support for this model, with its unique protocol as
version 2. The features of this protocol are:

 * Support data chunks for status and control messages for both
   directions.
 * Support a pair of MIDI input/output.
 * Support a data chunk for mic/instrument independent of analog line in.
 * Support a data chunk for playback return.
 * Support independent data chunks for S/PDIF of both optical/coaxial
   interfaces.
 * Support independent data chunks for each of main out and phone out.

Status of clock is configured by write transactions to 0x'ffff'f000'0b14.
Modes of optical interfaces are configured by write transactions to
0x'ffff'f000'0c04.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:34:08 +02:00
Takashi Sakamoto 5aaab1bf37 ALSA: firewire-motu: enable to read transaction cache via hwdep interface
MOTU FireWire series can transfer messages to registered address. These
messages are transferred for the status of internal clock synchronization
just after starting streams.

When the synchronization is stable, it's 0x01ffffff. Else, it's 0x05ffffff.

This commit adds a functionality for user space applications to receive
content of the message.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:34:06 +02:00
Takashi Sakamoto 71c3797779 ALSA: firewire-motu: add hwdep interface
This commit adds hwdep interface so as the other sound drivers for units
on IEEE 1394 bus have.

This interface is designed for mixer/control applications. By using this
interface, an application can get information about firewire node, can
lock/unlock kernel streaming and can get notification at starting/stopping
kernel streaming.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:34:02 +02:00
Takashi Sakamoto 9e796e7d59 ALSA: firewire-motu: add MIDI functionality
In MOTU FireWire series, MIDI messages are multiplexed to isochronous
packets as well as PCM frames, while the way is different from the one
in IEC 61883-6.

MIDI messages are put into a certain position in message chunks. One data
block can includes one byte of the MIDI messages. When data block includes
a MIDI byte, the block has a flag in a certain position of the message
chunk. These positions are unique depending on protocols.

Once a data block includes a MIDI byte, some following data blocks includes
no MIDI bytes. Next MIDI byte appears on a data block corresponding to
next cycle of physical MIDI bus. This seems to avoid buffer overflow caused
by bandwidth differences between IEEE 1394 bus and physical MIDI bus.

This commit adds MIDI functionality to transfer/receive MIDI messages.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:56 +02:00
Takashi Sakamoto dd49b2d1f0 ALSA: firewire-motu: add PCM functionality
This commit adds PCM functionality to transmit/receive PCM samples.

When one of PCM substreams are running or external clock source is
selected, current sampling rate is used. Else, the sampling rate is
changed according to requests from a userspace application.

Available number of samples in a frame of PCM substream is determined at
open(2) to corresponding PCM character device. Later, packet streaming
starts by ioctl(2) with SNDRV_PCM_IOCTL_PREPARE. In theory, between them,
applications can change state of the unit by any write transaction to
change the number. In this case, this driver may fail packet streaming due
to wrong data format.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:53 +02:00
Takashi Sakamoto 4638ec6ede ALSA: firewire-motu: add proc node to show current statuc of clock and packet formats
This commit adds a proc node for debugging purpose.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:51 +02:00
Takashi Sakamoto 9b2bb4f2f4 ALSA: firewire-motu: add stream management functionality
This commit adds a functionality to manage packet streaming for MOTU
FireWire series.

The streaming is not controlled by CMP, thus against IEC 61883-1. Write
transaction to certain addresses start/stop packet streaming.

Transactions to 0x'ffff'f000'0b00 results in isochronous channel number for
both directions and starting/stopping transmission of packets. The
isochronous channel number is represented in 6 bit field, thus units can
identify the channels up to 64, as IEEE 1394 bus specification described.

Transactions to 0x'ffff'f000'0b10 results in packet format for both
directions and transmission speed. When each of data block includes fixed
part of data chunks only, corresponding flags stand.

When bus reset occurs, the units continue to transmit packets with
non-contiguous data block counter. This causes discontinuity detection in
packet streaming engine and ALSA PCM applications receives EPIPE from any
I/O operation. In this case, typical applications manage to recover
corresponding PCM substream. This behaviour is kicked much earlier than
callback of bus reset handler by Linux FireWire subsystem, therefore
status of packet streaming is not changed in the handler.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:34 +02:00
Takashi Sakamoto 2e76701bbb ALSA: firewire-motu: handle transactions specific for MOTU FireWire models
All models of MOTU FireWire series can be controlled by write transaction
to addresses in a range from 0x'ffff'f0000'0b00 to 0x'ffff'f000'0cff.

The models support asynchronous notification. This notification has 32 bit
field data, and is transferred when status of clock changes. Meaning of
the value is not enough clear yet.

Drivers can register its address to receive the notification. Write
transaction to 0x'ffff'f000'0b04 registers higher 16 bits of the address.
Write transaction to 0x'ffff'f0000'0b08 registers the rest of bits. The
address includes node ID, thus it should be registered every time of bus
reset.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:32 +02:00
Takashi Sakamoto 4641c93940 ALSA: firewire-motu: add MOTU specific protocol layer
MOTU FireWire series uses blocking transmission for AMDTP packet streaming.
They transmit/receive 8,000 packets per second, to handle the same number
of data blocks as current sampling transmission frequency. Thus,
IEC 61883-1/6 packet streaming engine of ALSA firewire stack is available
for them.

However, the sequence of packet and data blocks includes some quirks.
Below sample is a sequence of CIP headers of packets received by 828mk2,
at 44.1kHz of sampling transmission frequency.

quads CIP1        CIP2
488   0x020F04E8  0x8222FFFF
  8   0x020F04F8  0x8222FFFF
488   0x020F0400  0x8222FFFF
488   0x020F0408  0x8222FFFF
  8   0x020F04E8  0x8222FFFF
488   0x020F04F0  0x8222FFFF
488   0x020F04F8  0x8222FFFF

The SID (source node ID), DBS (data block size), SPH (source packet header),
FMT (format ID), FDF (format dependent field) and SYT (time stamp) fields
are in IEC 61883-1. Especially, FMT is 0x02, FDF is 0x22 and SYT is 0xffff
to define MOTU specific protocol. In an aspect of dbc field, the value
represents accumulated number of data blocks included the packet. This
is against IEC 61883-1, because according to the specification this value
should be the number of data blocks already transferred.

In ALSA IEC 61883-1/6 engine, this quirk is already supported by
CIP_DBC_IS_END_EVENT flag, because Echo Audio Fireworks has.

Each data block includes SPH as its first quadlet field, to represent its
presentation time stamp. Actual value of SPH is compliant to IEC 61883-1;
lower 25 bits of 32 bits width consists of 13 bits cycle count and 12 bits
cycle offset.

The rest of each data block consists of 24 bit chunks. All of PCM samples,
MIDI messages, status and control messages are transferred by the chunks.
This is similar to '24-bit * 4 Audio Pack' in IEC 61883-6. The position of
each kind of data depends on generations of each model. The number of
whole chunks in a data block is a multiple of 4, to consists of
quadlet-aligned packets.

This commit adds data block processing layer specific for the MOTU
protocol. The remarkable point is the way to generate SPH header. Time
stamps for each data blocks are generated by below calculation:

 * Using pre-computed table for the number of ticks per event
  *  44,1kHz: (557 + 123/441)
  *  48.0kHz: (512 +   0/441)
  *  88.2kHz: (278 + 282/441)
  *  96.0kHz: (256 +   0/441)
  * 176.4kHz: (139 + 141/441)
  * 192.0kHz: (128 +   0/441)
 * Accumulate the ticks and set the value to SPH for every events.
 * This way makes sense only for blocking transmission because this mode
   transfers fixed number or none of events.

This calculation assumes that each data block has a PCM frame which is
sampled according to event timing clock. Current packet streaming layer
has the same assumption.

Although this sequence works fine for MOTU FireWire series at sampling
transmission frequency based on 48.0kHz, it is not enough at the frequency
based on 44.1kHz. The units generate choppy noise every few seconds.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:30 +02:00
Takashi Sakamoto 9dae017bf6 ALSA: firewire-lib: enable CIP_DBC_IS_END_EVENT for both directions of stream
Commit c8bdf49b9935("ALSA: fireworks/firewire-lib: Add a quirk for the
meaning of dbc") adds CIP_DBC_IS_END_EVENT flag just for tx packets.
However, MOTU FireWire series has this quirk for rx packets.

This commit allows both directions with the flag.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:28 +02:00
Takashi Sakamoto 9863874f02 ALSA: firewire-lib: add support for source packet header field in CIP header
In IEC 61883-1, CIP headers can have a SPH field. When a packet has 1 in
SPH field of its CIP header, the packet has a source packet headers. A
source packet header consists of 32 bit field (= 1 quadlet) and it
transfers time stamp, which is the same value as the lower 25 bits of the
IEEE 1394 CYCLE_TIMER register and the rest is zero.

This commit just supports source packet header field because IEC 61883-1
includes ambiguity the position of this header and its count. Each
protocol layer is allowed to have actual implementation according its
requirements.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:26 +02:00
Takashi Sakamoto a04513f8b1 ALSA: firewire-lib: record cycle count for the first packet
Currently, packet streaming layer passes generated SYT value to data block
processing layer. However, this is not enough in a case that the data block
processing layer generates time stamps by its own ways.

For out-packet stream, the packet streaming layer guarantees 8,000 times
calls of data block processing layers per sec. Therefore, when cycle count
of the first packet is recorded, data block processing layers can calculate
own time stamps with the recorded value.

For the reason, this commit allows packet streaming layer to record the
first cycle count. Each data block processing layer can read the count by
accessing a member of structure for packet streaming layer.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:24 +02:00
Takashi Sakamoto 59f6482c21 ALSA: firewire-motu: add an abstraction layer for three types of protocols
In an aspect of used protocols to communicate, models of MOTU FireWire
units are categorized to three generations.

This commit adds an abstraction layer of the protocols for features
related to packet streaming functionality. This layer includes 5
operations.

When configuring packet streaming functionality with sampling rate and
sampling transmission frequency, .get_clock_rate and .set_clock_rate are
called with proper arguments. MOTU FireWire series supports up to 192.0kHz.

When checking current source of sampling clock (not clock for packetization
layer), .get_clock_source is used. Enumeration is added to represent the
sources supported by this series. This operation can be used to expose
available sampling rate to user space applications when the unit is
configured to use any input signal as source of clock instead of crystal
clock.

In the protocols, the path between packet processing layer and digital
signal processing layer can be controlled. This looks a functionality to
'mute' the unit. For this feature, .switch_fetching_mode is added. This
can be used to suppress noises every time packet streaming starts/stops.

In a point of the size of data blocks at a certain sampling transmission
frequency, the most units accept several modes. This is due to usage of
optical interfaces. The size differs depending on which modes are
configured to the interfaces; None, S/PDIF and ADAT. Additionally, format
of packet is different depending on protocols. To cache current size of
data blocks and its format, .cache_packet_formats is added. This is used
by PCM functionality, packet streaming functionality and data block
processing layer.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:23 +02:00
Takashi Sakamoto 5e03c33e3d ALSA: firewire-motu: add a structure for model-dependent parameters.
MOTU FireWire series doesn't tell drivers their capabilities, thus
the drivers should have and apply model-dependent parameters to detected
models.

This commit adds a structure to represent such parameters. Capabilities
are represented by enumeration except for the number of analog line
in/out. Identification name also be in the structure because the units has
no registers for this purpose.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:21 +02:00
Takashi Sakamoto 8865a31e0f ALSA: firewire-motu: postpone sound card registration
Just after appearing on IEEE 1394 bus, this unit generates several bus
resets. This is due to loading firmware from on-board flash memory and
initialize hardware. It's better to postpone sound card registration.

This commit applies this idea.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:19 +02:00
Takashi Sakamoto 6c3cef4890 ALSA: firewire-motu: add skeleton for Mark of the unicorn (MOTU) FireWire series
This commit adds an new driver for MOTU FireWire series. In this commit,
this driver just creates/removes card instance according to bus event.
More functionalities will be added in following commits.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:16 +02:00
Ingo Molnar 174cd4b1e5 sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>
Fix up affected files that include this signal functionality via sched.h.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:32 +01:00
Takashi Iwai e1a063f43a Merge branch 'topic/intel-lpe-audio' into for-next 2017-01-25 22:11:17 +01:00
Takashi Sakamoto 1753187e28 ALSA: oxfw: enclose identifiers referred by single function for scs1x feature
Some identifiers are referred just by one functions. In this case, they
can be put into the function definition. This brings two merits; readers
can easily follow codes related to the identifiers, developers are free
from name conflict.

This commit moves such identifiers to each function definition.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-14 09:31:57 +01:00
Takashi Iwai 57eb67994a ALSA: firewire: Constify snd_rawmidi_ops
Now snd_rawmidi_ops is maintained as a const pointer in snd_rawmidi,
we can constify the definitions.

Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-12 12:50:38 +01:00
Takashi Sakamoto 921282360b ALSA: firewire-tascam: enclose identifiers referred by single function
Some identifiers are referred just by one functions. In this case, they
can be put into the function definition. This brings two merits; readers
can easily follow codes related to the identifiers, developers are free
from name conflict.

This commit moves such identifiers to each function definition.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-05 16:58:10 +01:00
Takashi Sakamoto a4e86cba09 ALSA: firewire-digi00x: enclose identifiers referred by single function
Some identifiers are referred just by one functions. In this case, they
can be put into the function definition. This brings two merits; readers
can easily follow codes related to the identifiers, developers are free
from name conflict.

This commit moves such identifiers to each function definition.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-05 16:58:07 +01:00
Takashi Sakamoto fcbe08d469 ALSA: dice: enclose identifiers referred by single function
Some identifiers are referred just by one functions. In this case, they
can be put into the function definition. This brings two merits; readers
can easily follow codes related to the identifiers, developers are free
from name conflict.

This commit moves such identifiers to each function definition.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-05 16:58:06 +01:00
Takashi Sakamoto 39feaf2d0a ALSA: oxfw: enclose identifiers referred by single function
Some identifiers are referred just by one functions. In this case, they
can be put into the function definition. This brings two merits; readers
can easily follow codes related to the identifiers, developers are free
from name conflict.

This commit moves such identifiers to each function definition.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-05 16:58:05 +01:00
Takashi Sakamoto 7cdc887a00 ALSA: fireworks: enclose identifiers referred by single function
Some identifiers are referred just by one functions. In this case, they
can be put into the function definition. This brings two merits; readers
can easily follow codes related to the identifiers, developers are free
from name conflict.

This commit moves such identifiers to each function definition.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-05 16:58:03 +01:00
Takashi Sakamoto 4780f774f9 ALSA: bebob: enclose identifiers referred by single function
Some identifiers are referred just by one functions. In this case, they
can be put into the function definition. This brings two merits; readers
can easily follow codes related to the identifiers, developers are free
from name conflict.

This commit moves such identifiers to each function definition.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-05 16:58:01 +01:00
Takashi Sakamoto e4f34cf6d5 Revert "ALSA: firewire-lib: change structure member with proper type"
This reverts commit 6b7e95d133. This commit
is based on a concern about value of the given parameter. It's expected
to be ORed value with some enumeration-constants, thus often it can not be
one of the enumeration-constants. I understood that this is out of
specification and causes implementation-dependent issues.

In C language specification, enumerated type can be interpreted as an
integer type, in which all of enumeration-constants in corresponding
enumerator-list can be stored. Implementations can select one of char,
signed int and unsigned int as its type, and this selection is
implementation-dependent.

In GCC, a signed integer is selected when at least one of
enumeration-constants has negative value, else an unsigned integer is
selected. This behaviour can be switched by -fshort-enums to short type.
Anyway, the type can be decided after scanning all of
enumeration-constants.

Totally, there's no rules to constrain the value of enumerated type to
be one of enumeration-constants. In short, in enumerated type, decision
of actual type for the type is the most important and
enumeration-constants are just used for the decision, thus it's permitted
to have an integer value in a range of enumeration-constants. In our case,
actual type for the type is currently deterministic to be either char or
unsigned int. Under GCC, it's unsigned int.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-05 08:39:47 +01:00
Takashi Iwai 337ccfce23 Merge branch 'for-linus' into for-next 2017-01-03 11:39:30 +01:00
Takashi Sakamoto b0e159fe34 ALSA: dice: ensure transmission speed for transmitted packets
As of kernel 4.10, ALSA dice driver is expected to be used in default
speed. In most cases, it's S400. While, IEEE 1394 specification describes
the other speed such as S800.

According to 'TCD30XX User Guide', its link layer controller supports
several transmission speed up to S800[0]. In Dice software interface,
transmission speed in output direction can be configured by asynchronous
transaction to 'TX_SPEED' offset in its address space. S800 may be
available.

This commit improves configuration of transmission unit before starting
packet streaming for this purpose. The value of 'max_speed' in 'fw_device'
data structure has available maximum speed decided in bus arbitration,
thus it's within capacity of the unit.

[0] TCD3xx User Guide - TCAT 1394 LLC, Revision 0.9.0-41360 (TC Applied Technologies, May 6 2015)
http://www.tctechnologies.tc/index.php/support/support-hardware/dice-iii-detailed-documentation

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-03 11:38:39 +01:00
Takashi Sakamoto 6b7e95d133 ALSA: firewire-lib: change structure member with proper type
The 'amdtp_stream' structure is initialized by a call of
'amdtp_stream_init()'. Although a parameter of this function is for bit
flags of packet attributes, its type is enumerator.

This commit changes the type so that it's proper for a bit flags.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-03 11:37:10 +01:00
Takashi Sakamoto 6a2a2f4556 ALSA: firewire-tascam: Fix to handle error from initialization of stream data
This module has a bug not to return error code in a case that data
structure for transmitted packets fails to be initialized.

This commit fixes the bug.

Fixes: 35efa5c489 ("ALSA: firewire-tascam: add streaming functionality")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-03 11:36:34 +01:00
Takashi Sakamoto e2eb31d721 ALSA: fireworks: fix asymmetric API call at unit removal
ALSA fireworks driver has a bug not to call an API to destroy
'cmp_connection' structure for input direction. Currently this causes no
issues because it just destroys 'mutex' structure, while it's better to
fix it for future work.

Fix: d23c2cc448 ("ALSA: fireworks/bebob/dice/oxfw: allow stream destructor after releasing runtime")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-03 11:36:13 +01:00
Takashi Sakamoto 03abd33a11 ALSA: oxfw: add support for Mackie Onyx 1640i
As of kernel 4.10,  ALSA OXFW driver has no entry for Onyx 1640i produced
by Mackie (Loud Technologies). This commit supplement it.

I note that there're two models produced by Mackie (Loud Technologies),
which have the same name 'Onyx 1640i'. The former model based on OXFW970,
the latter model based on Dice. This is probably due to low quality of
communication of OXFW series.

Additionally, the tester reports his or her experiences to get unexpected
result at higher sampling transmission frequency as 88.2/96.0 kHz. We
didn't have further investigation yet[0].

$ ./linux-firewire-utils/src/crpp < config_rom
               ROM header and bus information block
               -----------------------------------------------------------------
400  042525ce  bus_info_length 4, crc_length 37, crc 9678
404  31333934  bus_name "1394"
408  20ff5003  irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 5 (64)
40c  000ff205  company_id 000ff2     |
410  00000fcf  device_id 0500000fcf  | EUI-64 000ff20500000fcf

               root directory
               -----------------------------------------------------------------
414  0006c1b7  directory_length 6, crc 49591
418  03000ff2  vendor
41c  8100000a  --> descriptor leaf at 444
420  17001640  model
424  81000011  --> descriptor leaf at 468
428  0c0083c0  node capabilities per IEEE 1394
42c  d1000001  --> unit directory at 430

               unit directory at 430
               -----------------------------------------------------------------
430  00040b97  directory_length 4, crc 2967
434  1200a02d  specifier id: 1394 TA
438  13010001  version: AV/C
43c  17001640  model
440  81000010  --> descriptor leaf at 480

               descriptor leaf at 444
               -----------------------------------------------------------------
444  0008a886  leaf_length 8, crc 43142
448  00000000  textual descriptor
44c  00000000  minimal ASCII
450  4c6f7564  "Loud"
454  20546563  " Tec"
458  686e6f6c  "hnol"
45c  6f676965  "ogie"
460  7320496e  "s In"
464  632e0000  "c."

               descriptor leaf at 468
               -----------------------------------------------------------------
468  00059fcf  leaf_length 5, crc 40911
46c  00000000  textual descriptor
470  00000000  minimal ASCII
474  4f6e7978  "Onyx"
478  20313634  " 164"
47c  30690000  "0i"

               descriptor leaf at 480
               -----------------------------------------------------------------
480  00059fcf  leaf_length 5, crc 40911
484  00000000  textual descriptor
488  00000000  minimal ASCII
48c  4f6e7978  "Onyx"
490  20313634  " 164"
494  30690000  "0i"

[0]: [FFADO-user] Mackie 1640i issues (finer details)
https://sourceforge.net/p/ffado/mailman/message/35229260/

Tested-by: Seth O'Bannion <saobannion@gmail.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-03 11:34:38 +01:00
Thomas Gleixner 8b0e195314 ktime: Cleanup ktime_set() usage
ktime_set(S,N) was required for the timespec storage type and is still
useful for situations where a Seconds and Nanoseconds part of a time value
needs to be converted. For anything where the Seconds argument is 0, this
is pointless and can be replaced with a simple assignment.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
2016-12-25 17:21:22 +01:00
Takashi Sakamoto 2e57069c86 ALSA: bebob: compare whole string for model name so that readers are not confused
A modalias of 'ieee1394:ven00000D6Cmo00010060sp' hits units for M-Audio
FireWire Audiophile only. However the unit has two states relevant to
loaded firmware. Initial firmware returns 'FW Audiophile Bootloader',
while functional firmware returns 'FW Audiophile'.

ALSA bebob driver compares the units' model name to strings of 24 characters
by the first 15 characters. This is shorter way to differentiate these two
states but confusing to readers.

This commit improves the code for this point. Kernel stack is consumed more in
call of check_audiophile_booted() by a bit.

With initial firmware:
$ ./linux-firewire-utils/src/crpp < /sys/bus/firewire/devices/fw1/config_rom
               ROM header and bus information block
               -----------------------------------------------------------------
400  04276da6  bus_info_length 4, crc_length 39, crc 28070
404  31333934  bus_name "1394"
408  006481f2  irmc 0, cmc 0, isc 0, bmc 0, pmc 0, cyc_clk_acc 100,
               max_rec 8 (512), max_rom 1, gen 15, spd 2 (S400)
40c  000d6c03  company_id 000d6c     |
410  102b7e2e  device_id 03102b7e2e  | EUI-64 000d6c03102b7e2e

               root directory
               -----------------------------------------------------------------
414  00067414  directory_length 6, crc 29716
418  0c0083c0  node capabilities per IEEE 1394
41c  03000d6c  vendor
420  81000009  --> descriptor leaf at 444
424  17010060  model
428  8100000c  --> descriptor leaf at 458
42c  d1000001  --> unit directory at 430

               unit directory at 430
               -----------------------------------------------------------------
430  00049da1  directory_length 4, crc 40353 (should be 48611)
434  1200a02d  specifier id: 1394 TA
438  13014001  version: Vender Unique and AV/C
43c  17010060  model
440  8100000f  --> descriptor leaf at 47c

               descriptor leaf at 444
               -----------------------------------------------------------------
444  0004073e  leaf_length 4, crc 1854
448  00000000  textual descriptor
44c  00000000  minimal ASCII
450  4d2d4155  "M-AU"
454  44494f00  "DIO"

               descriptor leaf at 458
               -----------------------------------------------------------------
458  00086f21  leaf_length 8, crc 28449
45c  00000000  textual descriptor
460  00000000  minimal ASCII
464  46572041  "FW A"
468  7564696f  "udio"
46c  7068696c  "phil"
470  6520426f  "e Bo"
474  6f746c6f  "otlo"
478  61646572  "ader"

               descriptor leaf at 47c
               -----------------------------------------------------------------
47c  00086f21  leaf_length 8, crc 28449
480  00000000  textual descriptor
484  00000000  minimal ASCII
488  46572041  "FW A"
48c  7564696f  "udio"
490  7068696c  "phil"
494  6520426f  "e Bo"
498  6f746c6f  "otlo"
49c  61646572  "ader"

With functional firmware:
$ ./linux-firewire-utils/src/crpp < /sys/bus/firewire/devices/fw1/config_rom
               ROM header and bus information block
               -----------------------------------------------------------------
400  042de16f  bus_info_length 4, crc_length 45, crc 57711
404  31333934  bus_name "1394"
408  f0648122  irmc 1, cmc 1, isc 1, bmc 1, pmc 0, cyc_clk_acc 100,
               max_rec 8 (512), max_rom 1, gen 2, spd 2 (S400)
40c  000d6c03  company_id 000d6c     |
410  002b7e2e  device_id 03002b7e2e  | EUI-64 000d6c03002b7e2e

               root directory
               -----------------------------------------------------------------
414  0009dac4  directory_length 9, crc 56004
418  0400000d  hardware version
41c  0c0083c0  node capabilities per IEEE 1394
420  03000d6c  vendor
424  81000012  --> descriptor leaf at 46c
428  17010060  model
42c  81000015  --> descriptor leaf at 480
430  13ffffff  version
434  d1000002  --> unit directory at 43c
438  d4000006  --> dependent info directory at 450

               unit directory at 43c
               -----------------------------------------------------------------
43c  00041eb9  directory_length 4, crc 7865
440  1200a02d  specifier id: 1394 TA
444  13014001  version: Vender Unique and AV/C
448  17010060  model
44c  81000014  --> descriptor leaf at 49c

               dependent info directory at 450
               -----------------------------------------------------------------
450  000637c7  directory_length 6, crc 14279
454  120007f5  specifier id
458  13000001  version
45c  3affffc7  (immediate value)
460  3b100000  (immediate value)
464  3cffffc7  (immediate value)
468  3d600000  (immediate value)

               descriptor leaf at 46c
               -----------------------------------------------------------------
46c  0004b8e4  leaf_length 4, crc 47332
470  00000000  textual descriptor
474  00000000  minimal ASCII
478  4d2d4175  "M-Au"
47c  64696f00  "dio"

               descriptor leaf at 480
               -----------------------------------------------------------------
480  0006194b  leaf_length 6, crc 6475
484  00000000  textual descriptor
488  00000000  minimal ASCII
48c  46572041  "FW A"
490  7564696f  "udio"
494  7068696c  "phil"
498  65000000  "e"

               descriptor leaf at 49c
               -----------------------------------------------------------------
49c  0006194b  leaf_length 6, crc 6475
4a0  00000000  textual descriptor
4a4  00000000  minimal ASCII
4a8  46572041  "FW A"
4ac  7564696f  "udio"
4b0  7068696c  "phil"
4b4  65000000  "e"

Reported-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-11-18 09:22:47 +01:00
Takashi Iwai 3d2f4d0c0d Merge branch 'for-linus' into for-next
Back-merge from for-linus just to make the further development easier.
2016-09-11 09:33:12 +02:00
Julia Lawall 5116ffc32d ALSA: firewire: constify snd_pcm_ops structures
Check for snd_pcm_ops structures that are only stored in the ops field of a
snd_soc_platform_driver structure or passed as the third argument to
snd_pcm_set_ops.  The corresponding field or parameter is declared const,
so snd_pcm_ops structures that have this property can be declared as const
also.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct snd_pcm_ops i@p = { ... };

@ok1@
identifier r.i;
struct snd_soc_platform_driver e;
position p;
@@
e.ops = &i@p;

@ok2@
identifier r.i;
expression e1, e2;
position p;
@@
snd_pcm_set_ops(e1, e2, &i@p)

@bad@
position p != {r.p,ok1.p,ok2.p};
identifier r.i;
struct snd_pcm_ops e;
@@
e@i@p

@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
 struct snd_pcm_ops i = { ... };
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-02 11:50:11 +02:00
Takashi Sakamoto 6b1ca4bcad ALSA: fireworks: accessing to user space outside spinlock
In hwdep interface of fireworks driver, accessing to user space is in a
critical section with disabled local interrupt. Depending on architecture,
accessing to user space can cause page fault exception. Then local
processor stores machine status and handles the synchronous event. A
handler corresponding to the event can call task scheduler to wait for
preparing pages. In a case of usage of single core processor, the state to
disable local interrupt is worse because it don't handle usual interrupts
from hardware.

This commit fixes this bug, performing the accessing outside spinlock. This
commit also gives up counting the number of queued response messages to
simplify ring-buffer management.

Reported-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Cc: stable@vger.kernel.org
Fixes: 555e8a8f7f14('ALSA: fireworks: Add command/response functionality into hwdep interface')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-31 16:17:15 +02:00
Takashi Sakamoto 04b2d9c9c3 ALSA: firewire-tascam: accessing to user space outside spinlock
In hwdep interface of firewire-tascam driver, accessing to user space is
in a critical section with disabled local interrupt. Depending on
architecture, accessing to user space can cause page fault exception. Then
local processor stores machine status and handle the synchronous event. A
handler corresponding to the event can call task scheduler to wait for
preparing pages. In a case of usage of single core processor, the state to
disable local interrupt is worse because it doesn't handle usual interrupts
from hardware.

This commit fixes this bug, by performing the accessing outside spinlock.

Reported-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Cc: stable@vger.kernel.org
Fixes: e5e0c3dd257b('ALSA: firewire-tascam: add hwdep interface')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-31 14:24:37 +02:00
Takashi Sakamoto e15c282eff ALSA: bebob: unify configurations for some models produced by Yamaha/Terratec
The below models were developed with a cooperation by Yamaha and Terratec.
 - Yamaha GO 44/Terratec PHASE 24 FW
 - Yamaha GO 46/Terratec PHASE X24 FW

They have the same configurations, thus it's better to unify corresponding
codes.

This commit merges them to reduce the amount of maintained codes.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-24 15:35:11 +02:00
Takashi Sakamoto df6a886611 ALSA: bebob: rename file with vendor-dependent code so that it's for Yamaha/Terratec
Once Yamaha and Terratec cooperated to develop some audio and music units
on IEEE 1394 bus. On these models, the same embedded board is used, and
similar configurations are also applied.

This commit renames file for Yamaha's configuration so that it's for both
of Yamaha and Terratec.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-08-24 15:35:03 +02:00
Takashi Sakamoto 17e1717c11 ALSA: firewire-lib: change a member of event structure to suppress sparse wanings to bool type
Commit a9c4284bf5 ("ALSA: firewire-lib: add context information to
tracepoints") adds new members to tracepoint events of this module, to
represent context information. One of the members is bool type and
this causes sparse warnings.

16:1: warning: expression using sizeof bool
60:1: warning: expression using sizeof bool
16:1: warning: odd constant _Bool cast (ffffffffffffffff becomes 1)
60:1: warning: odd constant _Bool cast (ffffffffffffffff becomes 1)

This commit suppresses the warnings, by changing type of the member
to 'unsigned int'. Additionally, this commit applies '!!' idiom to
get 0/1 from 'in_interrupt()'.

Fixes: a9c4284bf5 ("ALSA: firewire-lib: add context information to tracepoints")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-18 16:32:09 +02:00
Takashi Sakamoto ff38e0c70a ALSA: firewire-lib: drop skip argument from helper functions to queue a packet
On most of audio and music units on IEEE 1394 bus which ALSA firewire stack
supports (or plans to support), CIP with two quadlets header is used.
Thus, there's no cases to queue packets with blank payload. If such packets
are going to be queued, it means that they're for skips of the cycle.

This commit simplifies helper functions to queue a packet.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-11 20:36:28 +02:00
Takashi Sakamoto a9c4284bf5 ALSA: firewire-lib: add context information to tracepoints
In current implementation, packet processing is done in both of software
IRQ contexts of IR/IT contexts and process contexts.

This is usual interrupt handling of IR/IT context for 1394 OHCI.
(in hardware IRQ context)
irq_handler() (drivers/firewire/ohci.c)
->tasklet_schedule()
(in software IRQ context)
handle_it_packet() or handle_ir_packet_per_buffer() (drivers/firewire/ohci.c)
->flush_iso_completions()
  ->struct fw_iso_context.callback.sc()
  = out_stream_callback() or in_stream_callback()

However, we have another chance for packet processing. It's done in PCM
frame handling via ALSA PCM interfaces.
(in process context)
ioctl(i.e. SNDRV_PCM_IOCTL_HWSYNC)
->snd_pcm_hwsync() (sound/core/pcm_native.c)
  ->snd_pcm_update_hw_ptr() (sound/core/pcm_lib.c)
    ->snd_pcm_update_hw_ptr0()
      ->struct snd_pcm_ops.pointer()
      = amdtp_stream_pcm_pointer()
        ->fw_iso_context_flush_completions() (drivers/firewire/core-iso.c)
          ->struct fw_card_driver.flush_iso_completions()
          = ohci_flush_iso_completions() (drivers/firewire/ohci.c)
            ->flush_iso_completions()
              ->struct fw_iso_context.callback.sc()
              = out_stream_callback() or in_stream_callback()

This design is for a better granularity of PCM pointer. When ioctl(2) is
executed with some commands for ALSA PCM interface, queued packets are
handled at first. Then, the latest number of handled PCM frames is
reported. The number can represent PCM frames transferred in most near
isochronous cycle.

Current tracepoints include no information to distinguish running contexts.
When tracing the interval of software IRQ context, this is not good.

This commit adds more information for current context. Additionally, the
index of packet processed in one context is added in a case that packet
processing is executed in continuous context of the same kind,

As a result, the output includes 11 fields with additional two fields
to commit 0c95c1d619 ("ALSA: firewire-lib: add tracepoints to dump a part
of isochronous packet data"):
17131.9186: out_packet: 07 7494 ffc0 ffc1 00 000700c0 9001a496 058 45 1 13
17131.9186: out_packet: 07 7495 ffc0 ffc1 00 000700c8 9001ba00 058 46 1 14
17131.9186: out_packet: 07 7496 ffc0 ffc1 00 000700d0 9001ffff 002 47 1 15
17131.9189: out_packet: 07 7497 ffc0 ffc1 00 000700d0 9001d36a 058 00 0 00
17131.9189: out_packet: 07 7498 ffc0 ffc1 00 000700d8 9001e8d4 058 01 0 01
17131.9189: out_packet: 07 7499 ffc0 ffc1 00 000700e0 9001023e 058 02 0 00
17131.9206: in_packet:  07 7447 ffc1 ffc0 01 3f070072 9001783d 058 32 1 00
17131.9206: in_packet:  07 7448 ffc1 ffc0 01 3f070072 90ffffff 002 33 1 01
17131.9206: in_packet:  07 7449 ffc1 ffc0 01 3f07007a 900191a8 058 34 1 02
(Here, some common fields are omitted so that a line is within 80
characters.)

The legend is:
 - The second of cycle scheduled for the packet
 - The count of cycle scheduled for the packet
 - The ID of node as source (hex)
 - The ID of node as destination (hex)
 - The value of isochronous channel
 - The first quadlet of CIP header (hex)
 - The second quadlet of CIP header (hex)
 - The number of included quadlets
 - The index of packet in a buffer maintained by this module
 - 0 in process context, 1 in IRQ context
 - The index of packet processed in the context

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-11 20:36:00 +02:00
Takashi Sakamoto 1dba9db0ea ALSA: firewire-lib: permit to flush queued packets only in process context for better PCM period granularity
These three commits were merged to improve PCM pointer granularity.
commit 76fb878948 ("ALSA: firewire-lib: taskletize the snd_pcm_period_elapsed() call")
commit e9148dddc3 ("ALSA: firewire-lib: flush completed packets when reading PCM position")
commit 92b862c7d6 ("ALSA: firewire-lib: optimize packet flushing")

The point of them is to handle queued packets not only in software IRQ
context of IR/IT contexts, but also in process context. As a result of
handling packets, period tasklet is scheduled when acrossing PCM period
boundary. This is to prevent recursive call of
'struct snd_pcm_ops.pointer()' in the same context.

When the pointer callback is executed in the process context, it's
better to avoid the second callback in the software IRQ context. The
software IRQ context runs immediately after scheduled in the process
context because few packets are queued yet.

For the aim, 'pointer_flush' is used, however it causes a race condition
between the process context and software IRQ context of IR/IT contexts.

Practically, this race is not so critical because it influences process
context to skip flushing queued packet and to get worse granularity of
PCM pointer. The race condition is quite rare but it should be improved
for stable service.

The similar effect can be achieved by using 'in_interrupt()' macro. This
commit obsoletes 'pointer_flush' with it.

Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-11 20:34:53 +02:00
Takashi Sakamoto 62f00e40b0 ALSA: firewire-lib: enable the same feature as CIP_SKIP_INIT_DBC_CHECK flag
In former commit, drivers in ALSA firewire stack always starts IT context
before IR context. If IR context starts after packets are transmitted by
peer unit, packet discontinuity may be detected because the context starts
in the middle of packet streaming. This situation is rare because IT
context usually starts immediately. However, it's better to solve this
issue. This is suppressed with CIP_SKIP_INIT_DBC_CHECK flag.

This commit enables the same feature as CIP_SKIP_INIT_DBC_CHECK.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-10 17:04:01 +02:00
Takashi Sakamoto 390a1512e6 ALSA: firewire-lib: code cleanup for outgoing packet handling
In previous commit, this module has no need to reuse parameters of
incoming packets for outgoing packets anymore. This commit arranges some
needless codes for outgoing packet processing.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-10 17:04:01 +02:00
Takashi Sakamoto d9a16fc926 ALSA: firewire-lib: code cleanup for incoming packet handling
In previous commit, this module has no need to reuse parameters of
incoming packets for outgoing packets anymore. This commit arranges some
needless codes for incoming packet processing.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-10 17:04:00 +02:00
Takashi Sakamoto dec63cc8b6 ALSA: firewire-lib: handle IT/IR contexts in each software interrupt context
In clause 6.3 of IEC 61883-6:2000, there's an explanation about processing
of presentation timestamp. In the clause, we can see "If a function block
receives a CIP, processes it and subsequently re-transmits it, then the
SYT of the outgoing CIP shall be the sum of the incoming SYT and the
processing delay." ALSA firewire stack has an implementation to partly
satisfy this specification. Developers assumed the stack to perform as an
Audio function block[1].

Following to the assumption, current implementation of ALSA firewire stack
use one software interrupt context to handle both of in/out packets. In
most case, this is processed in 1394 OHCI IR context independently of the
opposite context. Thus, this implementation uses longer CPU time in the
software interrupt context. This is not better for whole system.

Against the assumption, I confirmed that each ASIC for IEC 61883-1/6
doesn't necessarily expect it to the stack. Thus, current implementation
of ALSA firewire stack includes over-engineering.

This commit purges the implementation. As a result, packets of one
direction are handled in one software interrupt context and spends
minimum CPU time.

[1] [alsa-devel] [PATCH 0/8] [RFC] new driver for Echo Audio's Fireworks based devices
http://mailman.alsa-project.org/pipermail/alsa-devel/2013-June/062660.html

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-10 17:03:59 +02:00
Takashi Sakamoto 28e64f5176 ALSA: firewire-tascam: drop reuse of incoming packet parameter for outgoing packet parameter
In packet streaming protocol applied to TASCAM FireWire series, the value
of SYT field in CIP header is always zero, therefore it has no meaning.
There's no need to synchronize packets in both direction for the series.

In current implementation of ALSA firewire stack, driver for the series
uses incoming packet parameter for outgoing packet parameter to calculate
the number of data blocks. This can be simplified because the task of
corresponding driver is to transfer data blocks enough to sampling transfer
frequency.

This commit purges support of full duplex synchronization to prevent
over-engineering implementation.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-10 17:03:59 +02:00
Takashi Sakamoto eb4a378fc9 ALSA: fireworks: drop reuse of incoming packet parameter for ougoing packet parameter
On Fireworks board module of Echo Audio, TSB43Cx43A (IceLynx Micro, iCEM)
is used to process payload of isochronous packets. There's an public
document of this chip[1]. This document is for firmware programmers to
transfer/receive AMDTP with IEC60958 data format, however in clause 2.5,
2.6 and 2.7, we can see system design to utilize the sequence of value in
SYT field of CIP header. In clause 2.3, we can see the specification of
Audio Master Clock (MCLK) from iCEM.

Well, this clock is actually not used for sampling clock. This can be
confirmed when corresponding driver transfer random value as the sequence
of SYT field. Even if in this case, the unit generates proper sound.

Additionally, in unique command set for this board module, the format
of CIP is changed; for IEC 61883-6 mode which we use, and for Windows
Operating System. In the latter mode, the whole 32 bit field in second CIP
header from Windows driver is used to represent counter of packets (NO-DATA
code is still used for packets without data blocks). If the master clock
was physically used by DSP on the board module, the Windows driver must
have transferred correct sequence of SYT field.

Furthermore, as long as seeing capacities of AudioFire2, AudioFire4,
AudioFire8, AudioFirePre8 and AudioFire12, these models don't support
SYT-Match clock source.

Summary, we have no need to relate incoming/outgoing packets. This commit
drops reusing SYT sequence of incoming packets for outgoing packets.

[1] Using TSB43Cx43A: S/PDIF over 1394 (2003, Texus Instruments
Incorporated)
http://www.ti.com/analog/docs/litabsmultiplefilelist.tsp?literatureNumber=slla148&docCategoryId=1&familyId=361

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-10 17:03:58 +02:00
Takashi Sakamoto c71283cb68 ALSA: bebob: drop reuse of incoming packet parameter for outgoing packet parameter
Windows driver for BeBoB-based models mostly wait for transmitted packets,
then transfer packets to the models. This looks for the relationship
between incoming packets and outgoing packets to synchronize the sequence
of presentation timestamp.

However, the sequence between packets of both direction has no
relationship. Even if receiving NO-DATA packets, the drivers transfer
packets with meaningful value in SYT field. Additionally, the order of
starting packets is always the same, independently of the source of clock.
The corresponding driver is expected as a generator of presentation
timestamp and these models can select it as a source of sampling clock.

This commit drops reusing SYT sequence from ALSA bebob driver. The driver
always transfer packets with presentation timestamp generated by ALSA
firewire stack, without re-using the sequence of value in SYT field in
incoming packets to outgoing packets.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-10 17:03:57 +02:00
Takashi Sakamoto 0c95c1d619 ALSA: firewire-lib: add tracepoints to dump a part of isochronous packet data
When audio and music units have some quirks in their sequence of packet,
it's really hard for non-owners to identify the quirks. Although developers
need dumps for sequence of packets, it's difficult for users who have no
knowledges and no equipments for this purpose.

This commit adds tracepoints for this situation. When users encounter
the issue, they can dump a part of packet data via Linux tracing framework
as long as using drivers in ALSA firewire stack.

Additionally, tracepoints for outgoing packets will be our help to check
and debug packet processing of ALSA firewire stack.

This commit newly adds 'snd_firewire_lib' subsystem with 'in_packet' and
'out_packet' events. In the events, some attributes of packets and the
index of packet managed by this module are recorded per packet.

This is an usage:

$ trace-cmd record -e snd_firewire_lib:out_packet \
                   -e snd_firewire_lib:in_packet
/sys/kernel/tracing/events/snd_firewire_lib/out_packet/filter
/sys/kernel/tracing/events/snd_firewire_lib/in_packet/filter
Hit Ctrl^C to stop recording
^C
$ trace-cmd report trace.dat
...
23647.033934: in_packet:  01 4073 ffc0 ffc1 00 000f0040 9001b2d1 122 44
23647.033936: in_packet:  01 4074 ffc0 ffc1 00 000f0048 9001c83b 122 45
23647.033937: in_packet:  01 4075 ffc0 ffc1 00 000f0050 9001ffff 002 46
23647.033938: in_packet:  01 4076 ffc0 ffc1 00 000f0050 9001e1a6 122 47
23647.035426: out_packet: 01 4123 ffc1 ffc0 01 010f00d0 9001fb40 122 17
23647.035428: out_packet: 01 4124 ffc1 ffc0 01 010f00d8 9001ffff 002 18
23647.035429: out_packet: 01 4125 ffc1 ffc0 01 010f00d8 900114aa 122 19
23647.035430: out_packet: 01 4126 ffc1 ffc0 01 010f00e0 90012a15 122 20
(Here, some common fields are omitted so that a line to be within 80
characters.)
...

One line represent one packet. The legend for the last nine fields is:
 - The second of cycle scheduled for the packet
 - The count of cycle scheduled for the packet
 - The ID of node as source (hex)
  - Some devices transfer packets with invalid source node ID in their CIP
    header.
 - The ID of node as destination (hex)
  - The value is not in CIP header of packets.
 - The value of isochronous channel
 - The first quadlet of CIP header (hex)
 - The second quadlet of CIP header (hex)
 - The number of included quadlets
 - The index of packet in a buffer maintained by this module

This is an example to parse these lines from text file by Python3 script:

\#!/usr/bin/env python3
import sys

def parse_ts(second, cycle, syt):
    offset = syt & 0xfff
    syt >>= 12
    if cycle & 0x0f > syt:
        cycle += 0x10
    cycle &= 0x1ff0
    cycle |= syt
    second += cycle // 8000
    cycle %= 8000
    # In CYCLE_TIMER of 1394 OHCI, second is represented in 8 bit.
    second %= 128
    return (second, cycle, offset)

def calc_ts(second, cycle, offset):
    ts = offset
    ts += cycle * 3072
    # In DMA descriptor of 1394 OHCI, second is represented in 3 bit.
    ts += (second % 8) * 8000 * 3072
    return ts

def subtract_ts(minuend, subtrahend):
    # In DMA descriptor of 1394 OHCI, second is represented in 3 bit.
    if minuend < subtrahend:
        minuend += 8 * 8000 * 3072
    return minuend - subtrahend

if len(sys.argv) != 2:
    print('At least, one argument is required for packet dump.')
    sys.exit()

filename = sys.argv[1]

data = []

prev = 0
with open(filename, 'r') as f:
    for line in f:
        pos = line.find('packet:')
        if pos < 0:
            continue

        pos += len('packet:')
        line = line[pos:].strip()
        fields = line.split(' ')

        datum = []

        datum.append(fields[8])

        syt = int(fields[6][4:], 16)

        # Empty packet in IEC 61883-1, or NODATA in IEC 61883-6
        if syt == 0xffff:
            data_blocks = 0
        else:
            payload_size = int(fields[7], 10)
            data_block_size = int(fields[5][2:4], 16)
            data_blocks = (payload_size - 2) / data_block_size
        datum.append(data_blocks)

        second = int(fields[0], 10)
        cycle = int(fields[1], 10)
        start = (second << 25) | (cycle << 12)
        datum.append('0x{0:08x}'.format(start))
        start = calc_ts(second, cycle, 0)

        datum.append("0x" + fields[5])
        datum.append("0x" + fields[6])

        if syt == 0xffff:
            second = 0
            cycle = 0
            tick = 0
        else:
            second, cycle, tick = parse_ts(second, cycle, syt)
        ts = calc_ts(second, cycle, tick)
        datum.append(start)
        datum.append(ts)
        if ts == 0:
            datum.append(0)
            datum.append(0)
        else:
            # Usual case, or a case over 8 seconds.
            if ts > start or start > 7 * 8000 * 3072:
                datum.append(subtract_ts(ts, start))
                if ts > prev or start > 7 * 8000 * 3072:
                    gap = subtract_ts(ts, prev)
                    datum.append(gap)
                else:
                    datum.append('backward')
            else:
                datum.append('invalid')
            prev = ts

        data.append(datum)

sys.exit()

The data variable includes array with these elements:
- The index of the packet
- The number of data blocks in the packet
- The value of cycle count (hex)
- The value of CIP header 1 (hex)
- The value of CIP header 2 (hex)
- The value of cycle count (tick)
- The value of calculated presentation timestamp (tick)
- The offset between the cycle count and presentation timestamp
- The elapsed ticks from the previous presentation timestamp

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-09 15:18:25 +02:00
Takashi Sakamoto f90e2dedf7 ALSA: firewire-lib: compute the value of second field in cycle count for IR context
In callback function of isochronous context, modules can queue packets to
indicated isochronous cycles. Although the cycle to queue a packet is
deterministic by calculation, this module doesn't implement the calculation
because it's useless for processing.

In future, the cycle count is going to be printed with the other parameters
for debugging. This commit is the preparation. The cycle count is computed
by cycle unit, and correctly arranged to corresponding packets. The
calculated count is used in later commit.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-09 15:18:25 +02:00
Takashi Sakamoto 73fc7f0801 ALSA: firewire-lib: compute the value of second field in cycle count for IT context
In callback function of isochronous context, u32 variable is passed for
cycle count. The value of this variable comes from DMA descriptors of 1394
Open Host Controller Interface (1394 OHCI). In the specification, DMA
descriptors transport lower 3 bits for second field and full cycle field in
16 bits field, therefore 16 bits of the u32 variable are available. The
value for second is modulo 8, and the value for cycle is modulo 8,000.

Currently, ALSA firewire-lib module don't use the value of the second
field, because the value is useless to calculate presentation timestamp in
IEC 61883-6. However, the value may be useful for debugging. In later
commit, it will be printed with the other parameters for debugging.

This commit makes this module to handle the whole cycle count including
second. The value is calculated by cycle unit. The existed code is already
written with ignoring the value of second, thus this commit causes no
issues.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-09 15:18:24 +02:00
Takashi Sakamoto f8ff65bce4 ALSA: dice: add support for M-Audio Profire 610 and perhaps 2626
M-Audio Profire 610 has an unexpected value in version field of its config
ROM, thus ALSA dice driver is not assigned to the model due to a mismatch
of modalias.

This commit adds an entry to support the model. I expect the entry is
also for Profire 2626.

I note that Profire 610 uses TCD2220 (so-called Dice Jr.), and supports a
part of Extended Application Protocol (EAP).

$ cd linux-firewire-utils/src
$ ./crpp < /sys/bus/firewire/devices/fw1/config_rom
               ROM header and bus information block
               ------------------------------------------------------------
400  04047689  bus_info_length 4, crc_length 4, crc 30345
404  31333934  bus_name "1394"
408  e0ff8112  irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 255,
               max_rec 8 (512), max_rom 1, gen 1, spd 2 (S400)
40c  000d6c04  company_id 000d6c     |
410  04400002  device_id 0404400002  | EUI-64 000d6c0404400002

               root directory
               ------------------------------------------------------------
414  000695fe  directory_length 6, crc 38398
418  03000d6c  vendor
41c  8100000a  --> descriptor leaf at 444
420  17000011  model
424  8100000d  --> descriptor leaf at 458
428  0c0087c0  node capabilities per IEEE 1394
42c  d1000001  --> unit directory at 430

               unit directory at 430
               ------------------------------------------------------------
430  0004fb14  directory_length 4, crc 64276
434  12000d6c  specifier id
438  130100d1  version
43c  17000011  model
440  8100000c  --> descriptor leaf at 470

               descriptor leaf at 444
               ------------------------------------------------------------
444  0004b8e4  leaf_length 4, crc 47332
448  00000000  textual descriptor
44c  00000000  minimal ASCII
450  4d2d4175  "M-Au"
454  64696f00  "dio"

               descriptor leaf at 458
               ------------------------------------------------------------
458  00053128  leaf_length 5, crc 12584
45c  00000000  textual descriptor
460  00000000  minimal ASCII
464  50726f46  "ProF"
468  69726520  "ire "
46c  36313000  "610"

               descriptor leaf at 470
               ------------------------------------------------------------
470  00053128  leaf_length 5, crc 12584
474  00000000  textual descriptor
478  00000000  minimal ASCII
47c  50726f46  "ProF"
480  69726520  "ire "
484  36313000  "610"

$ cat /proc/asound/card1/dice
sections:
  global: offset 10, size 90
  tx: offset 100, size 142
  rx: offset 242, size 282
  ext_sync: offset 524, size 4
  unused2: offset 0, size 0
global:
  owner: ffc0:000100000000
  notification: 00000040
  nick name: FW610
  clock select: internal 48000
  enable: 1
  status: locked 48000
  ext status: 00000040
  sample rate: 48000
  version: 1.0.4.0
  clock caps: 32000 44100 48000 88200 96000 176400 192000 aes1 aes4 aes adat tdif wc arx1 arx2 internal
  clock source names: SPDIF\AES34\AES56\TOS\AES_ANY\ADAT\ADAT_AUX\Word Clock\Unused\Unused\Unused\Unused\Internal\\
  ...

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-05-08 11:17:37 +02:00
Takashi Sakamoto b610386c8a ALSA: firewire-tascam: deleyed registration of sound card
When some tascam units are connected sequentially, userspace
applications are involved at bus-reset state on IEEE 1394 bus. In the
state, any communications can be canceled. Therefore, sound card
registration should be delayed till the bus gets calm.

This commit achieves it.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-04-25 10:40:42 +02:00
Takashi Sakamoto 86c8dd7f4d ALSA: firewire-digi00x: delayed registration of sound card
When some digi00x units are connected sequentially, userspace
applications are involved at bus-reset state on IEEE 1394 bus. In the
state, any communications can be canceled. Therefore, sound card
registration should be delayed till the bus gets calm.

This commit achieves it.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-31 15:36:20 +02:00
Takashi Sakamoto 6c29230e2a ALSA: oxfw: delayed registration of sound card
Some oxfw based units tends to fail asynchronous communication when
IEEE 1394 bus is under bus-reset state. When registering sound card
instance at unit probe callback, userspace applications can be involved
to the state.

This commit postpones the registration till the bus is calm.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-31 15:36:19 +02:00
Takashi Sakamoto 7d3c1d5901 ALSA: fireworks: delayed registration of sound card
When some fireworks units are connected sequentially, userspace
applications are involved at bus-reset state on IEEE 1394 bus. In the
state, any communications can be canceled. Therefore, sound card
registration should be delayed till the bus gets calm.

This commit achieves it.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-31 15:36:19 +02:00
Takashi Sakamoto 04a2c73c97 ALSA: bebob: delayed registration of sound card
Some bebob based units tends to fail asynchronous communication when
IEEE 1394 bus is under bus-reset state. When registering sound card
instance at unit probe callback, userspace applications can be involved
to the state.

This commit postpones the registration till the bus is calm.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-31 15:36:18 +02:00
Takashi Sakamoto 923f92ebb4 ALSA: firewire-lib: add new function to schedule a work for sound card registration
In former commit, ALSA dice driver postpone sound card registration after
IEEE 1394 bus is calm. This idea has advantages for the other drivers.

This commit adds a helper function for it to firewire-lib module. The
function is really for the specific purpose. Callers should initialize
delayed work structure with callback function.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-31 15:36:18 +02:00
Takashi Sakamoto 0eced45ca6 ALSA: dice: simplify unit probe processing
In former commit, ALSA dice driver doesn't generate kernel warnings
when unplugging units before initializing stream data.

This commit moves the initialization to delayed registration of sound
card, to simplify unit probe processing.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-31 15:36:17 +02:00
Takashi Sakamoto 44c376b959 ALSA: firewire-lib: suppress kernel warnings when releasing uninitialized stream data
When any of AMDTP stream data are not initialized and private data is
going to be released, WARN_ON() in amdtp_stream_destroy() is hit and
dump messages. This may take users irritated.

This commit fixes the bug to skip releasing when it's not initialized.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-31 15:36:17 +02:00
Takashi Sakamoto 25c0e953eb ALSA: firewire-tascam: add Kconfig entry for TASCAM FW-1804
I forgot it.

Fixes: 3e78e1518e12('ALSA: firewire-tascam: add support for FW-1804')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-28 09:39:41 +02:00
Takashi Sakamoto 0655ac2f40 ALSA: fireworks: move model quirk detection code to information parser
Currently, model-specific quirks are detected out of information parser,
however it's natural to detect it in the parser.

This commit applies the idea.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-28 09:39:41 +02:00
Takashi Sakamoto 329fec2f7f ALSA: oxfw: remove needless member from private structure
In former commit, 'struct device_info' is obsoleted, whereas private
structure still keeps a pointer to it.

This commit remove the member.

d6ce6bbd7d83('ALSA: oxfw: rename a structure so that it means backward compatibility to old drivers')

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-28 09:39:40 +02:00
Takashi Sakamoto 093dd44978 ALSA: bebob: remove needless argument from local function
The 'vendor_id' argument is not used in the local function. Let's remove
it.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-28 09:39:40 +02:00
Takashi Sakamoto 6b94fb14fc ALSA: dice: fix memory leak when unplugging
When sound card is going to be released, dice private data is
also released. Then all of data should be released. However,
stream data is not released. This causes memory leak when
unplugging dice unit.

This commit fixes the bug.

Fixes: 4bdc495c87b3('ALSA: dice: handle several PCM substreams when any isochronous streams are available')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-28 09:32:57 +02:00
Takashi Sakamoto 8cc1a8ab47 ALSA: dice: use structure to represent register parameters instead of array with basic type element
In dice interface, two blocks of register are accessible via IEEE 1394
asynchronous transaction to represent the number of supported isochronous
streams and the number of quadlets for stream information.

Current ALSA dice driver uses array with 'unsigned int' element for
temporary cache of these information. But using structure is preferable
for begin easily comprehensible.

This commit applies a local structure for this aim.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-10 15:44:39 +01:00
Takashi Sakamoto 7cafc65b3a ALSA: dice: force to add two pcm devices for listed models
Some models reduce the number of available isochronous streams for higher
sampling transfer frequency. Such models bring an issue about how to add
PCM substreams. When at lower sampling transfer frequency, the
models reports whole available streams, thus this driver can add enough
number of PCM substreams at probing time. On the other hand, at higher
sampling transfer frequency, this driver can just add reduced number of
PCM substreams. After probed, even if the sampling transfer frequency is
changed to lower rate, fewer PCM substreams are actually available. This
is inconvenience.

For the reason, this commit adds a list so that this driver assume models
on the list to have two pairs of PCM substreams. This list keeps the name
of model in which the number of available streams differs depending on
sampling transfer frequency.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-09 16:20:58 +01:00
Takashi Sakamoto 4bdc495c87 ALSA: dice: handle several PCM substreams when any isochronous streams are available
In former commits, ALSA dice driver can handle available isochronous
streams. This commit adds support for several PCM substreams on the
streams.

The additional PCM substreams are available via another ALSA PCM character
devices so that one ALSA PCM application can handle them without cumbersome
operations. For example, two PCM substreams are available on each stream,
two ALSA character devices are added for them. In configuration space of
alsa-lib, it's represented with 'hw:0,0' and 'hw:0,1'.

The PCM substreams are constraint to parameters of the corresponding
streams. If the PCM substreams are unavailable for some reasons,
open(2) to ALSA PCM character device returns error and reports ENXIO.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-09 16:20:57 +01:00
Takashi Sakamoto 436b5abe22 ALSA: dice: handle whole available isochronous streams
This commit enables ALSA dice driver to handle whole available streams.

In Dice, certain registers represent the number of available streams at
current sampling transfer frequency for both directions. The parameters
of each stream are represented in a block of register. This block is
aligned sequentially. These streams start simultaneously by writing
enable bit to a register.

This commit operates these registers when starting/stopping streams.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-09 16:20:57 +01:00
Takashi Sakamoto 8ae25b760a ALSA: dice: have two sets of isochronous resources/streams
Currently ALSA dice driver handles a pair of isochronous resources for
IEC 61883-1/6 packet streaming. While, according to some documents about
ASICs named as 'Dice', several isochronous streams are available.

Here, I start to describe ASICs produced under 'Dice' name.
 * Dice II (designed by wavefront semiconductor, including TCAT's IP)
   * STD (with limited functionality of DTCP)
   * CP  (with full functionality of DTCP)
 * TCD2210/2210-E (so-called 'Dice Mini')
 * TCD2220/2220-E (so-called 'Dice Jr.')
 * TCD3070-CH (so-called 'Dice III')

Some documents are public and we can see hardware design of them. We can
find some articles about hardware internal register definitions
(not registers exported to IEEE 1394 bus).

* DICE II User Guide
  * http://www.tctechnologies.tc/archive/downloads/dice_ii_user_guide.pdf
    * 6.1 AVS Audio Receivers
      * Table 6.1: AVS Audio Receiver Memory Map
        * ARX1-ARX4
    * 6.2 AVS Audio Transmitters
      * Table 6.2: AVS Audio Transmitter Memory Map
        * ATX1, ATX2
* TCD22xx User Guide
  * http://www.tctechnologies.tc/downloads/tcd22xx_user_guide.pdf
    * 6.1 AVS Audio Receivers
      * Table 66: AVS Audio Receiver Memory Map
        * ARX1, ARX2
    * 6/2 AVS Audio Transmitters
      * Table 67: AVS Audio Transmitter Memory Map
        * ATX1, ATX2
* DICE III
  * http://www.tctechnologies.tc/downloads/TCD3070-CH.pdf
    * Dual stream 63 channel transmitter/receiver

For Dice II and TCD22xx series, maximum 16 data channels are transferred in
an AMDTP packet, while for Dice III, maximum 32 data channels are
transferred.

According to the design of the series of these ASICs, this commit allows
this driver to handle additional set of isochronous resources. For
practical reason, two pair of isochronous resources are added. As of this
commit, this driver still use a pair of the first isochronous resources.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-03-09 16:20:56 +01:00
Takashi Sakamoto 1387e3eafa ALSA: dice: drop duplex streams synchronization to transfer own time stamps
This commit drops implementation of duplex streams synchronization
from ALSA dice driver, due to a reason of hardware design. This patch
allows dice-based units to generate sounds correctly when isochronous
packet streaming starts at first time.

In IEC 61883-6:2005, CIP packetization layer for AM824 data format
utilizes the value of SYT field in CIP header of received packet for
a reference to phase lock loop. Figure 3 in clause 4.3 describes it.
The value is an offset from cycle_time field of every cycle start packet
from cycle master on IEEE 1394 bus. The time calculated with these two
fields is called as 'presentation timestamp' which represents the time
to play data included in the packet.

Although, this idea includes some problems due to accuracy of timekeep in
cycle master, accuracy of transmission of cycle start packet on the bus
with the other units, accuracy of sampling clock in data transmitter side
and accuracy of replay in data receiver side. In most case, these
accuracies somewhat worse because there's no such ideal hardwares in this
world.

For the issues, ASICs for Dice include Jitter Elimination Technologies
(JET) PLL. The PLL can handle several sources of clock and compensate it
with high-precision internal clock source. The sequence of value in syt
field of received AMDTP packets is one of the sources, therefore
transmitters on IEEE 1394 bus should transfer it.

On the other hand, current ALSA dice driver is programmed with a mode of
duplex streams with synchronization. In this mode, the driver outputs
packets after some incoming packets are handled, to re-use the value of
SYT field in incoming packets to the value for outgoing packets. This mode
is enabled when source signal of sampling clock is set to internal, and
this is a major use case. Thus, in most cases, the unit receives no packets
during a short time after packet streaming starts.

As long as I experienced, this causes the units to generate no sounds at
first time to receive packets. This issue occurs only with Dice II. I guess
this is due to a quirk of the PLL. In short, the PLL cannot generate firm
signals to ADCs/DACs or the other ICs when no packets are received in the
beginning of packet streaming. While, on second time or later, the unit
generates sound correctly. I guess that starting packet streaming at first
time sets the PLL correctly.

Well, still based on my hypothesis and no way to prove it, this commit
drops duplex streams synchronization from this driver. At least, the PLL
requires the sequence of value in SYT field of received AMDTP packets as
one of source of clock signals with internal clock source.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-28 10:56:24 +01:00
Takashi Sakamoto 956dea9e91 ALSA: oxfw: discontinue MIDI substream for scs1x at transaction failure
With a previous commit, ALSA oxfw driver retries transferring MIDI
messages at transaction failure for scs1x. On the other hand, there're
fatal transaction error. Then, no MIDI messages reach to the unit anymore.
In this case, MIDI substream should be terminated.

This commit stops MIDI transmission after the fatal error occurs.
Unfortunately, unlike ALSA PCM functionality, ALSA rawmidi core has no
feature to discontinue MIDI substream runtime in kernel side, thus this
commit just stops MIDI transmission without notifying it to userspace.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-24 16:32:08 +01:00
Takashi Sakamoto b4c23ab1cb ALSA: oxfw: retry MIDI transferring for scs1x at transaction failure
Currently, ALSA oxfw driver has a TODO to retry MIDI transferring
at transaction failure.

This commit achieves it. Current implementation uses snd_rawmidi_transmit()
to transfer messages, thus the target MIDI messages are not in buffer when
transaction failure is detected. Although we cannot use a pair of
snd_rawmidi_transmit_peek() and snd_ramwidi_transmit_ack(), the
messages are still in scs1x specific structure and the data is available
for retries.

This commit adds a member to the structure for the length of buffered
messages, and uses the value again at retries.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-24 16:31:54 +01:00
Takashi Sakamoto 99d7355914 ALSA: fireworks: serialize transactions to update connections at bus reset
In IEC 61883-1, at bus-reset, applications can continue isochronous
streaming by updating connections. In ALSA fireworks driver, the
operation is executed in 'update' handler for bus driver.

The connection resources are also changed in process contexts of PCM/MIDI
applications. Therefore, bus-reset handling has race condition
against connection. Current ALSA fireworks driver has a bug for the
condition.

This commit fixes the bug, by expand critical section with mutex. As a
result, connection updating operation in bus-reset handler and connection
changing operation in process context are serialized.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-20 15:46:38 +01:00
Takashi Sakamoto 3800e6f944 ALSA: bebob: give up updating streams at bus reset handler
DM1000/DM1100/DM1500 chipsets transfer packets with discontinue value in
'dbc' field of CIP header. For ALSA bebob driver, this makes its bus-reset
handler meaningless, because the discontinuity is detected quite earlier
than executing the handler.

This commit gives up updating streams at the bus reset handler.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-20 15:45:54 +01:00
Takashi Sakamoto 4fd6c6c729 ALSA: bebob: change type of substream counter from atomic_t to unsigned int
The counter is incremented/decremented in critical section protected with
mutex. Therefore, no need to use atomic_t.

This commit changes the type to unsigned int.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-20 15:45:38 +01:00
Takashi Sakamoto 2a71e70166 ALSA: bebob: move mutex from function callee to callers
Currently, critical section is protected by mutex in functions of
fireworks_stream.c. Callers increments/decrements substreams counter
before calling the functions. Moving mutex to the callers code allows
to change type of the substream counter from atomic_t to unsigned int.

This commit is a preparation for obsoleting usage of atomic_t for
substream counter.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-20 15:45:25 +01:00
Takashi Sakamoto 14a37ac1bf ALSA: bebob: simplify bus-reset handling
At bus-reset, DM1000/DM1100/DM1500 chipsets transfer packets with
discontinuous value in 'dbc' field of CIP header. In this case, packet
streaming layer in firewire-lib module stops streaming and set XRUN to PCM
substream.

In ALSA, PCM applications are notified the XRUN status by the return value
of ALSA PCM interface. They can recover this state by executing
snd_pcm_prepare(), then PCM drivers' prepare handler is called, and start
new PCM substream. For ALSA BeBoB driver, the handler establishes new
connections and start new AMDTP streaming.

Unfortunately, neither the PCM applications nor the driver know the reason
of XRUN. The driver gets to know the reason when update handler is called
by IEEE 1394 bus driver. As long as I tested, the order of below events are
not fixed:
 * Detecting packet discontinuity in tasklet context of OHCI 1394 driver
 * Calling prepare handler in process context of ALSA PCM application
 * Calling update handler in kthread context of IEEE 1394 bus driver

The unpredictable order is disadvantage for the driver to be compliant to
CMP. In IEC 61883-1, new CMP establish operations should be done 1 sec
(isoc_resource_delay) after bus-reset. Within 1 sec, CMP restore
operations are allowed. For this reason, in former commit ('b6bc812327aa:
ALSA: bebob/firewire-lib: Add a quirk for discontinuity at bus reset'),
the process context is forced to wait for executing update handler. The
process context wait for bus-reset up to 1 sec. This commit solves the
issue, while causes more disadvantages. For PCM applications, calling
snd_pcm_prepare() for recovering XRUN state takes more time and the driver
got a bit complicated code, while the recovery is not always successful.

As long as I tested, DM1000/DM1100/DM1500 and BeBoB firmware can allow
drivers to establish new connections just after bus reset. Furthermore,
any FCP transactions are handled correctly. Therefore, the driver don't
need to wait for bus reset handler for starting new streaming.

This commit removes the codes to reduce maintenance cost.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-20 15:45:15 +01:00
Takashi Sakamoto ea79005367 ALSA: oxfw: use workqueue instead of tasklet for scs1x
This commit replaces tasklet with workqueue for scs1x functionality of
ALSA oxfw driver.

This driver transfers MIDI message specific for SCS.1m and SCS.1d. This
task is currently done in software IRQ context of tasklet. In a view of
system, this context is limited resources and some important drivers (at
least, more important than ALSA oxfw driver) use the context as its
bottom-harf.

If the work to transfer MIDI messages is done within a time, it's better
to use the other context for the work. Actually, with recent CPUs, the
work will be scheduled within a time. This is a reason of this commit.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-18 15:18:33 +01:00
Takashi Sakamoto fbeac84dbe ALSA: dice: old firmware optimization for Dice notification
As long as I tested, Dice-based models produced by TC Electronic with
factory-configured settings transfer no notification within
ensure_phase_lock(). On the other hand, with upgraded firmwares, it
starts to transfer the notification. This seems to be a quirk of earlier
firmwares.

This commit ensures phase lock by reading a register after waiting for
the notification. Even if it's timed-out, ensure_phase_lock() return
success as long as the register has expected clock status.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-12 09:52:49 +01:00
Takashi Sakamoto aec045b80d ALSA: dice: change notification mask to detect lock status change
With former patchset, ALSA dice driver doesn't change clock parameters
anymore, while the driver still touch clock configuration for phase lock.

Although the locking status is in Dice notification, the driver doesn't
detect it. Usually, this causes no issues because in most case
NOTIFY_LOCK_CHG notification transfers after NOTIFY_CLOCK_ACCEPTED
notification, while it's better to detect locking status.

This commit changes notification mask just to detect lock status change.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-12 09:52:43 +01:00
Takashi Iwai 9b88daa513 Merge branch 'for-linus' into for-next 2016-02-09 23:08:48 +01:00
Takashi Sakamoto dfabc0eee1 ALSA: dice: ensure phase lock before starting streaming
In former commits, probing process has no need to set sampling transfer
frequency. Although it's OK to drop a function to change the frequency
from this module, some models require it before streaming. This seems to
be due to phase lock of clock source.

This commit moves the function from transaction layer to stream layer, and
rename it according to the purpose.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-09 12:22:11 +01:00
Takashi Sakamoto 6f688268b3 ALSA: dice: purge generating channel cache
Dice interface design doesn't allow drivers to read supported combination
between sampling transfer frequencies and the number of Multi bit linear
audio data channels. Due to the design, ALSA dice driver changes current
sampling transfer frequency to generate cache of the combinations at
device probing processing.

Although, this idea is worse because ALSA dice driver changes the state of
clock. This is not what users want when they save favorite configuration
to the device in advance.

Furthermore, there's a possibility that the format of data block is decided
not only according to current sampling transfer frequency, but also the
other factors, i.e. data format for digital interface. It's not good to
generate channel cache according to the sampling transfer frequency only.

This commit purges processing cache data and related structure members. As
a result, users must set preferable sampling transfer frequency before
using ALSA PCM applications, as long as they want to start any PCM
substreams at the rate except for current one.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-09 12:22:10 +01:00
Takashi Sakamoto c30076568d ALSA: dice: get the number of MBLA data channel at opening PCM substream
This commit is a preparation to remove members related to channel cache
for the number of channels for multi bit linear audio data and MIDI
ports. This commit changes the way to get the number of multi bit linear
audio data channel. It's directly retrieved by asynchronous transactions
to some registers.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-09 12:22:10 +01:00
Takashi Sakamoto b9022f4d2c ALSA: dice: add MIDI ports according to current number of MIDI substreams
This commit changes the way to add ALSA MIDI ports. This driver read the
number of multiplexed MIDI substreams from hardware register, then adds the
same number of ALSA MIDI ports. This commit is based on my assumption that
the number is fixed at all of supported sampling transfer frequency.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-09 12:22:09 +01:00
Takashi Sakamoto 1bc8e12d94 ALSA: dice: limit stream to current sampling transfer frequency.
In previous commit, ALSA Dice driver limits PCM substreams at current
sampling transfer frequency and current number of Multi bit linear audio
data channel. Thus, the driver has no need to start AMDTP streams at
the other sampling transfer frequency except for current one. This is due
to Dice interface design.

This commit limits AMDTP stream at current sampling transfer frequency,
according to the design.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-09 12:22:09 +01:00
Takashi Sakamoto 0d5ee195b1 ALSA: dice: limit to current sampling transfer frequency
ALSA PCM core has a functionality for rule of PCM substream parameters.
Typically, when userspace opens PCM character devices, each driver adds
its own rules to PCM substream according to design of hardware. When the
userspace executes hw_params ioctl with favorite parameters, the actual
parameters are calculated according to the rules and the given parameters.
Then, the result is returned to userspace.

Currently, ALSA Dice driver has the rule between channels and rates, while
Dice interface design doesn't allow drivers to retrieve all of the
combinations. Dice drivers are just allowed to get current sampling
transfer frequency and the number of multi bit linear audio data channels
in an data block of an AMDTP packet.

This commit purges the rule, and limit PCM substreams to current sampling
transfer frequency, following to the interface design.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-09 12:22:08 +01:00
Geert Uytterhoeven b8cb3750ce ALSA: firewire-digi00x: Drop bogus const type qualifier on dot_scrt()
sound/firewire/digi00x/amdtp-dot.c:67: warning: type qualifiers ignored on function return type

Drop the bogus "const" type qualifier on the return type of dot_scrt()
to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-09 12:16:52 +01:00
Takashi Sakamoto 56661a2ed5 ALSA: firewire-tascam: remove needless member for control and status message
Commit 3beab0f844 added a member for control and status message, while
it's planned and not implemented yet.

This commit removes it.

Fixes: 3beab0f844fa('ALSA: firewire-tascam: add support for outgoing MIDI messages by asynchronous transaction')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-05 12:47:14 +01:00
Takashi Sakamoto 61ebe49964 ALSA: firewire-tascam: remove a flag for controller
Currently, 'struct snd_tscm_spec' has a member named as 'is_controller' to
identify MIDI controller. This member was originally added to skip
parse control and status messages in isochronous packets for non-controller
model.

As long as I investigate, FW-1804 (non-controller) also transfers the
control and status message, thus it becomes meaningless.

This commit removes it.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-05 12:46:15 +01:00
Takashi Sakamoto 3e78e1518e ALSA: firewire-tascam: add support for FW-1804
This model supports:
 * maximum 12 PCM channels for PCM playback
 * maximum 18 PCM channels for PCM capture
 * 4 ports for MIDI playback
 * 4 ports for MIDI capture
 * control and status messages in tx isochronous packets
 * up to 96.0 kHz

This commit adds support for the model. As the other supported models,
all of available PCM channels are always enabled.

As I described in commit c0949b2785, Ilya Zimnovich had investigated
TASCAM FireWire series in 2011 with his FW-1804. In his report, this model
has internal multiplexer and any software implementation can control it.
Following to the design of ALSA firewire stack, this commit won't
implement it. It should be in userspace via Linux fw character device.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-05 12:46:07 +01:00
Takashi Sakamoto 5d2560a427 ALSA: firewire-tascam: fix NULL pointer dereference when model identification fails
When unsupported models are connected, snd-firewire-tascam module causes
NULL pointer dereference in fw_core_remove_address_handler() (due to
list_del_rcu()).

This commit prevents this bug.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-02-05 12:45:59 +01:00
Lucas Tanure 07905298e4 ALSA: bebob: Use a signed return type for get_formation_index
The return type "unsigned int" was used by the get_formation_index function
despite of the aspect that it will eventually return a negative	error code.
So, change to signed int and get index by reference in the parameters.

Done with the help of Coccinelle.

[Fix the missing braces suggested by Julia Lawall -- tiwai]

Signed-off-by: Lucas Tanure <tanure@linux.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-26 11:38:53 +01:00
Takashi Sakamoto 2eb65d67af ALSA: dice: expand timeout to wait for Dice notification
Some users have reported that their Dice based models generate ETIMEDOUT
when starting PCM playback. It means that current timeout (=100msec) is
not enough for their models to transfer notifications.

This commit expands the timeout up to 2 sec. As a result, in a worst case,
any operations to start AMDTP streams takes 2 sec or more. Then, in
userspace, snd_pcm_hw_params(), snd_pcm_prepare(), snd_pcm_recover(),
snd_rawmidi_open(), snd_seq_connect_from() and snd_seq_connect_to() may
take the time.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-06 10:18:54 +01:00
Takashi Sakamoto a2875a92b8 ALSA: dice: purge transaction initialization at timeout of Dice notification
In previous commit, card registration is processed under situation
with few bus reset. There's no need to add a workaround of transaction
re-initialization at timeout.

This commit purges the re-initialization.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-06 10:18:54 +01:00
Takashi Sakamoto b59fb1900b ALSA: dice: postpone card registration
Some models based on ASIC for Dice II series (STD, CP) change their
hardware configurations after appearing on IEEE 1394 bus. This is due to
interactions of boot loader (RedBoot), firmwares (eCos) and vendor's
configurations. This causes current ALSA dice driver to get wrong
information about the hardware's capability because its probe function
runs just after detecting unit of the model.

As long as I investigated, it takes a bit time (less than 1 second) to load
the firmware after bootstrap. Just after loaded, the driver can get
information about the unit. Then the hardware is initialized according to
vendor's configurations. After, the got information becomes wrong.
Between bootstrap, firmware loading and post configuration, some bus resets
are observed.

This commit offloads most processing of probe function into workqueue and
schedules the workqueue after successive bus resets. This has an effect to
get correct hardware information and avoid involvement to bus reset storm.

For code simplicity, this change effects all of Dice-based models, i.e.
Dice II, Dice Jr., Dice Mini and Dice III.

I use a loose strategy to manage a race condition between the work and the
bus reset. This is due to a specification of dice transaction. When bus
reset occurs, registered address for the transaction is cleared. Drivers
must re-register their own address again. While, this operation is required
for the work because the work includes to wait for the transaction. This
commit uses no lock primitives for the race condition. Instead, checking
'registered' member of 'struct snd_dice' avoid executing the work again.
If sound card is not registered, the work can be scheduled again by bus
reset handler.

When .remove callback is executed, the sound card is going to be released.
The work should not be pending or executed in the releasing. This commit
uses cancel_delayed_work_sync() in .remove callback and wait till the
pending work finished. After .remove callback, .update callback is not
executed, therefore no works are scheduled again.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-06 10:18:53 +01:00
Takashi Sakamoto 4a47a87def ALSA: dice: split subaddress check from category check
Before allocating an instance of sound card, ALSA dice driver checks
chip_ID_hi in Bus information block of Config ROM, then also checks
subaddresses. The former operation reads cache of Config ROM in Linux
FireWire subsystem, while the latter operation sends read transaction.
The latter can be merged into initialization of transaction system.

This commit splits these two operations to reduce needless transactions
in probe processing.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-01-06 10:18:52 +01:00
Takashi Sakamoto de5126cc3c ALSA: oxfw: add stream format quirk for SCS.1 models
As long as I investigate SCS.1m, this model reports to transfer/receive
PCM data channels/MIDI conformant data channels in tx/rx AMDTP packet.
There's a contradiction that this model actually has no analog/digital
capture port for PCM frames and no physical MIDI ports.

I guess that SCS.1d also has the contradiction. This model has no
analog/digital ports for PCM frames and no physical MIDI ports, thus it
requires no streaming functionality.

This commit adds some modification codes to handle the contradiction,
as much as possible. Unfortunately, this module adds one PCM playback
substream for SCS.1d so as SCS.1m.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22 11:51:32 +01:00
Takashi Sakamoto 9e2004f9ce ALSA: oxfw: obsolete scs1x module
Now ALSA oxfw driver gains functionalities which scs1x module has.

This commit obsoletes the scs1x module, and adds a line of MODULE_ALIAS
to load oxfw module instead of scs1x module.

In scs1x module, the name of 'shortname' field is fixed as 'SCS1x'. This
field is used to name MIDI ports for both of SCS.1m and SCS.1d. This is
not good because typically some SCS.1m and SCS.1d are used in the same
system. It's better to distinguish them according to name of the ports.
This commit applies model name in config ROM to the 'shortname'.

For the name of 'driver' and 'longname', this commit uses the same way
applied to the other models. This change may not bring disadvantages to
users because userspace applications use ALSA rawmidi or seq interface
and these interfaces are not influenced by them directly.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22 11:51:31 +01:00
Takashi Sakamoto 6f5dcb28df ALSA: oxfw: add MIDI playback port for SCS.1 models
This commit adds MIDI playback ports so that scs1x driver has.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22 11:51:31 +01:00
Takashi Sakamoto d7d20e7781 ALSA: oxfw: copy handlers of asynchronous transaction for MIDI playback
This commit copies some functions of asynchronous transactions for MIDI
playback, to merge scs1x module. The features of payload in asynchronous
transaction are the same as captured MIDI messages.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22 11:51:30 +01:00
Takashi Sakamoto 8250427dc1 ALSA: oxfw: add MIDI capture port for SCS.1 models
This commit adds MIDI capture so that scs1x driver has.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22 11:51:29 +01:00
Takashi Sakamoto 13b8b78c7f ALSA: oxfw: copy handlers of asynchronous transaction for MIDI capture
This commit copies some functions of asynchronous transactions for MIDI
capture, to merge scs1x module. The features of payload in asynchronous
transaction are:

 * System exclusive messages for SCS.1 are encoded without ID data. In
   this encoding scheme, 4 bits in LSB are available. The bits are squashed
   in payload byte. Thus, one payload byte transfers two MIDI messages.
 * The first byte of payload byte means:
  * 0x00: depending on second payload byte
   * 0xf9: including escaped system exclusive messages for SCS.1, up to
     3 byte (= 6 MIDI messages)
   * the others: including MIDI 1.0 messages
  * the others: including escaped system exclusive messages for SCS.1, up
    to 64 bytes

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22 11:51:29 +01:00
Takashi Sakamoto e3315b439c ALSA: oxfw: allocate own address region for SCS.1 series
When physical controls on SCS.1 models are operated, the models transfer
MIDI messages in asynchronous transactions on IEEE 1394 bus. The models
have a register to have an address for the transactions, and drivers
can register own address for this purpose.

This commit keeps a region of address, registers it and adds a handler for
the transactions.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22 11:51:28 +01:00
Takashi Sakamoto 3f47152a1c ALSA: oxfw: add scs1x layer
Stanton Controllers and Systems 1 (SCS.1) series is supported by ALSA
scs1x driver. This driver just supports MIDI functionality. On the other
hand, models in this series are based on OXFW971 and ALSA OXFW driver can
support them.

SCS.1 series has MIDI functionality to control its surface state such as
LED lighting. When operating physical knobs and faders, the models
generate MIDI messages. These MIDI messages are transferred by asynchronous
transactions. These transactions are really model-specific and ALSA OXFW
driver requires the functionality so as scs1x module implements.

This commit adds scs1x layer as a preparation to merge scs1x driver to
oxfw driver.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22 11:51:27 +01:00
Takashi Sakamoto d6ce6bbd7d ALSA: oxfw: rename a structure so that it means backward compatibility to old drivers
In former commits, some model-specific members are split from the
structure. The structure is just to keep names for compatibility to old
drivers.

This commit arranges name of the structure and localize it.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22 11:50:31 +01:00
Takashi Sakamoto 3e2f45708e ALSA: oxfw: move model-specific parameters from common structure
In previous commit, some members are moved from 'struct snd_oxfw' because
they're model-specific. There are also the other model-specific parameters
in 'struct device_info'.

This commit moves these members to model-specific structure.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22 11:50:31 +01:00
Takashi Sakamoto 40540de503 ALSA: oxfw: move model-specific members from common structure
Currently, 'struct snd_oxfw' has some members for models supported by old
firewire-speakers driver, while these members are useless to the other
models.

This commit allocates new memory block and moves these members to
model-specific structure.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22 11:50:30 +01:00
Takashi Sakamoto c582cc66b9 ALSA: oxfw: enable to keep memory block for model-specific structure
ALSA oxfw driver should have backward compatibility to old
firewire-speakers driver. Additionally, in future commit, scs1x driver
will be merged. It's nice to add a pointer to have a memory block for
model-specific structures.

This commit adds a member to 'struct snd_oxfw' for this aim. Deallocation
is done at freeing ALSA card structure.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-22 11:50:29 +01:00
Takashi Iwai f2777c1344 Merge branch 'topic/firewire-update' into for-next 2015-12-16 12:09:10 +01:00
Takashi Sakamoto 5ce8cc4844 ALSA: oxfw: gather model-dependent conditions to a function
Adding control elements is just for models supported by old
firewire-speakers modules. The processing should be in a function to add
model-dependent quirk.

This commit moves the codes to the function. As a result, the function
should handle error state, thus this commit also changes prototype of
the function.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-15 16:30:05 +01:00
Takashi Sakamoto 27e6663501 ALSA: oxfw: reuse driver entry to detect quirks
Currently, assignment to model-dependent quirk is corresponding to
asynchronous transactions on IEEE 1394 bus. This is also achieved with
device entry.

This commit changes the processing of model-dependent quirk with the
entry. As a result, the transactions are sent only for Loud models.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-15 16:30:04 +01:00
Takashi Sakamoto eab8e4e461 ALSA: oxfw: change function prototype for AV/C Audio Subunit command
ALSA OXFW driver uses AV/C Audio Subunit commands to control some models.
The commands get/set the state of Feature function block of the subunit.
The commands are not specific to OXFW, thus there's a possibility to use
them in the other drivers.

Currently, helper functions for the commands require 'struct snd_oxfw',
although, it's not necessarily required. It's better to change prototype
of the functions without the structure for future use.

This commit changes the prototype.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-15 16:30:04 +01:00
Takashi Sakamoto 29aa09acb2 ALSA: oxfw: rename local functions for control elements so that they represent as local
This commit renames local functions with prefix 'spkr_', so that they're
for firewire-speakers.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-15 16:30:03 +01:00
Takashi Sakamoto f3a0e32a6f ALSA: oxfw: rename a file for control elements so that it's for model-specific
In ALSA firewire stack, drivers basically has no control elements. This
is due to the fact that each model has own functionality even if they use
the same communication chipset. Implementing all of the functionalities in
kernel space unreasonably increases our efforts to maintain the stack. In
most case, these functionalities can be implemented in userspace via Linux
fw character devices.

However, ALSA OXFW driver has control elements comes from old
firewire-speakers driver. Adding the elements is in a file names as
'oxfw-control.c', while the elements are really model-specific. The
name is confusing because it gives an idea to handle control elements
for all of OXFW-based models.

This commit renames the file so that it's just for models supported by
old firewire-speakers driver.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-12-15 16:30:02 +01:00
Takashi Sakamoto 4d2c50a0a9 ALSA: fireworks: change type of substream counter from atomic_t to unsigned int
The counter is incremented/decremented in critical section protected with
mutex. Therefore, no need to use atomic_t.

This commit changes the type to unsigned int.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-11-14 17:53:46 +01:00
Takashi Sakamoto ea54a37442 ALSA: fireworks: move mutex from function callees to callers
Currently, critical section is protected by mutex in functions of
fireworks_stream.c. Callers increments/decrements substreams counter
before calling the functions. Moving mutex to the callers code allows
to change type of the substeram counter from atomic_t to unsigned int.

This commit is a preparation for obsoleting usage of atomic_t for
substream counter.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-11-14 17:53:41 +01:00
Takashi Sakamoto 5d5563b14f ALSA: dice: fix detection of Loud devices
Commit a471fcde8c ("ALSA: dice: fix detection of Weiss devices") adds
a quirk of Weiss models. According to users' reports, Loud models also
have the similar quirk. They have 0x10 in the category field.

This commit adds support for Mackie Onyx Blackbird and Onyx-i series.
As long as I know, Dice-based models produced by
Focusrite/Alesis/PreSonus/M-Audio/TC Electronic have default value (0x04)
in their category field, thus it may be reasonable to add a condition
statement for Loud models, instead of removing the check of category value.

Reported-by: Rouge Etienne <erouge.externe@m6.fr>
Reported-by: Etilem <contact@etilem.net>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-11-14 17:50:57 +01:00
Takashi Sakamoto 94d505e974 ALSA: oxfw: add an comment to Kconfig for TASCAM FireOne
A commit to add support for this model should have added a comment
about this model to Kconfig.

Fixes: 759a2f40c9fa('ALSA: oxfw: add an entry for TASCAM FireOne')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-11-08 09:04:36 +01:00
Takashi Sakamoto d1482fb335 ALSA: firewire-digi00x: add another rawmidi character device for MIDI control ports
Digi 002/003 family uses two ways to transfer MIDI messages. They're
different mechanisms, while it's better to handle the ways in different
ALSA rawmidi character devices because one character device has just a
set of operations.

This commit adds another rawmidi character device for control MIDI port. As
a result, first rawmidi character device is just for MIDI messages
transferred by isochronous packets.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-30 19:34:44 +01:00
Takashi Sakamoto c5fcee0373 ALSA: firewire-digi00x: add MIDI operations for MIDI control port
Digi 002/003 family has two types of MIDI port; one is for physical MIDI
port and another is for MIDI control message. The former is transferred in
isochronous packet, and the latter is transferred by asynchronous
transaction. These transmission mechanisms are completely different, while
current ALSA digi00x driver defines a set of operations for them with
several condition statements. As a result, codes for the operation are
messy.

This commit adds a set of MIDI operation for control MIDI ports. In later
commit, it's applied as an operation for ALSA rawmidi character device.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-10-30 19:34:32 +01:00