The current partition table unmap code clears the _PAGE_PRESENT bit
out of the pte, which leaves pud_huge/pmd_huge true and does not
clear pud_present/pmd_present. This can confuse subsequent page
faults and possibly lead to the guest looping doing continual
hypervisor page faults.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
The standard eieio ; tlbsync ; ptesync must follow tlbie to ensure it
is ordered with respect to subsequent operations.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Currently, the HV KVM guest entry/exit code adds the timebase offset
from the vcore struct to the timebase on guest entry, and subtracts
it on guest exit. Which is fine, except that it is possible for
userspace to change the offset using the SET_ONE_REG interface while
the vcore is running, as there is only one timebase offset per vcore
but potentially multiple VCPUs in the vcore. If that were to happen,
KVM would subtract a different offset on guest exit from that which
it had added on guest entry, leading to the timebase being out of sync
between cores in the host, which then leads to bad things happening
such as hangs and spurious watchdog timeouts.
To fix this, we add a new field 'tb_offset_applied' to the vcore struct
which stores the offset that is currently applied to the timebase.
This value is set from the vcore tb_offset field on guest entry, and
is what is subtracted from the timebase on guest exit. Since it is
zero when the timebase offset is not applied, we can simplify the
logic in kvmhv_start_timing and kvmhv_accumulate_time.
In addition, we had secondary threads reading the timebase while
running concurrently with code on the primary thread which would
eventually add or subtract the timebase offset from the timebase.
This occurred while saving or restoring the DEC register value on
the secondary threads. Although no specific incorrect behaviour has
been observed, this is a race which should be fixed. To fix it, we
move the DEC saving code to just before we call kvmhv_commence_exit,
and the DEC restoring code to after the point where we have waited
for the primary thread to switch the MMU context and add the timebase
offset. That way we are sure that the timebase contains the guest
timebase value in both cases.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
A single fix for a recent regression.
* 'vmwgfx-fixes-4.17' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Set dmabuf_size when vmw_dmabuf_init is successful
- vc4: Fix memory leak on driver close (Eric)
- dumb-buffers: Prevent overflow in DIV_ROUND_UP() (Dan)
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlr8hJYACgkQlvcN/ahK
Bwo/RAf9EbvVp9r9B0yAzChimHod4MSFNY0dqAGy84DbgQ1dJ6vhF0HeRoiVbTo8
1BrH8x212boMQHnVonIm9+XxW8pqX6ynTDEO4squTapLwgAZ06iP5tcnhpd6sawA
zTQx91uYOfDYH1NeIDwnmvnCZuC8U+/RIak7AJx0AJrXJLEb52Brl9smrndovAtJ
iYIryKF5tEMm5hzfv/Vna78oWcw1uPGjhxiL5gULCFsIqesTA8fS4+Kp8Opr38zb
9bMpBTYEkobcHEtXnGVjy8azvWn3QYkOQzi9oOfGV/XVD1w7HvGoNjg29WPte0m1
rap9ZDWj6iwRXPgZ1Faj6VDwPYm9kA==
=H2nb
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2018-05-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
- core: Fix regression in dev node offsets (Haneen)
- vc4: Fix memory leak on driver close (Eric)
- dumb-buffers: Prevent overflow in DIV_ROUND_UP() (Dan)
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
* tag 'drm-misc-fixes-2018-05-16' of git://anongit.freedesktop.org/drm/drm-misc:
drm/dumb-buffers: Integer overflow in drm_mode_create_ioctl()
drm/vc4: Fix leak of the file_priv that stored the perfmon.
drm: Match sysfs name in link removal to link creation
a field event. This is increasingly important for the histogram trigger
work that is being extended.
While auditing trace events, I found that a couple of the xen events
were used as just marking that a function was called, by creating
a static array of size zero. This can play havoc with the tracing
features if these events are used, because a zero size of a static
array is denoted as a special nul terminated dynamic array (this is
what the trace_marker code uses). But since the xen events have no
size, they are not nul terminated, and unexpected results may occur.
As trace events were never intended on being a marker to denote
that a function was hit or not, especially since function tracing
and kprobes can trivially do the same, the best course of action is
to simply remove these events.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWvtgDhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtY0AQC2HSSRkP5GVL1/c1Xoxl202O1tQ9Dp
G08oci4bfcRCIAEA8ATc+1LZPGQUvd0ucrD4FiJnfpYUHrCTvvRsz4d9LQQ=
=HUQR
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.17-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Some of the ftrace internal events use a zero for a data size of a
field event. This is increasingly important for the histogram trigger
work that is being extended.
While auditing trace events, I found that a couple of the xen events
were used as just marking that a function was called, by creating a
static array of size zero. This can play havoc with the tracing
features if these events are used, because a zero size of a static
array is denoted as a special nul terminated dynamic array (this is
what the trace_marker code uses). But since the xen events have no
size, they are not nul terminated, and unexpected results may occur.
As trace events were never intended on being a marker to denote that a
function was hit or not, especially since function tracing and kprobes
can trivially do the same, the best course of action is to simply
remove these events"
* tag 'trace-v4.17-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/x86/xen: Remove zero data size trace events trace_xen_mmu_flush_tlb{_all}
After commit b196d88aba ("tun: fix use after free for ptr_ring") we
need clean up tx ring during release(). But unfortunately, it tries to
do the cleanup blindly after socket were destroyed which will lead
another use-after-free. Fix this by doing the cleanup before dropping
the last reference of the socket in __tun_detach().
Reported-by: Andrei Vagin <avagin@virtuozzo.com>
Acked-by: Andrei Vagin <avagin@virtuozzo.com>
Fixes: b196d88aba ("tun: fix use after free for ptr_ring")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kalderon says:
====================
qed: LL2 fixes
This series fixes some issues in ll2 related to synchronization
and resource freeing
====================
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stress on qedi/qedr load unload lead to list_del corruption.
This is due to ll2 connection terminate freeing resources without
verifying that no more ll2 processing will occur.
This patch unregisters the ll2 status block before terminating
the connection to assure this race does not occur.
Fixes: 1d6cff4fca ("qed: Add iSCSI out of order packet handling")
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ll2 flows of flushing the txq/rxq need to be synchronized with the
regular fp processing. Caused list corruption during load/unload stress
tests.
Fixes: 0a7fb11c23 ("qed: Add Light L2 support")
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Driver should free all pending isles once it gets a FLUSH cqe from FW.
Part of iSCSI out of order flow.
Fixes: 1d6cff4fca ("qed: Add iSCSI out of order packet handling")
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to what was done with commit a52956dfc5 ("net sched actions:
fix refcnt leak in skbmod"), fix the error path of tcf_vlan_init() to avoid
refcnt leaks when wrong value of TCA_VLAN_PUSH_VLAN_PROTOCOL is given.
Fixes: 5026c9b1ba ("net sched: vlan action fix late binding")
CC: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The configuration settings for RBTX4927 were accidentally removed,
leading to a silently broken network interface.
Re-add the missing settings to fix this.
Fixes: 8eb97ff5a4 ("net: 8390: remove m32r specific bits")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli says:
====================
net: dsa: bcm_sf2: CFP fixes
This patch series fixes a number of usability issues with the SF2 Compact Field
Processor code:
- we would not be properly bound checking the location when we let the kernel
automatically place rules with RX_CLS_LOC_ANY
- when using IPv6 rules and user space specifies a location identifier we
would be off by one in what the chain ID (within the Broadcom tag) indicates
- it would be possible to delete one of the two slices of an IPv6 while leaving
the other one programming leading to various problems
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
It was possible to delete only one half of an IPv6, which would leave
the second half still programmed and possibly in use. Instead of
checking for the unused bitmap, we need to check the unique bitmap, and
refuse any deletion that does not match that criteria. We also need to
move that check from bcm_sf2_cfp_rule_del_one() into its caller:
bcm_sf2_cfp_rule_del() otherwise we would not be able to delete second
halves anymore that would not pass the first test.
Fixes: ba0696c22e ("net: dsa: bcm_sf2: Add support for IPv6 CFP rules")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We had several issues that would make the programming of IPv6 rules both
inconsistent and error prone:
- the chain ID that we would be asking the hardware to put in the
packet's Broadcom tag would be off by one, it would return one of the
two indexes, but not the one user-space specified
- when an user specified a particular location to insert a CFP rule at,
we would not be returning the same index, which would be confusing if
nothing else
- finally, like IPv4, it would be possible to overflow the last entry by
re-programming it
Fix this by swapping the usage of rule_index[0] and rule_index[1] where
relevant in order to return a consistent and correct user-space
experience.
Fixes: ba0696c22e ("net: dsa: bcm_sf2: Add support for IPv6 CFP rules")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we let the kernel pick up a rule location with RX_CLS_LOC_ANY, we
would be able to overwrite the last rules because of a number of issues.
The IPv4 code path would not be checking that rule_index is within
bounds, and it would also only be allowed to pick up rules from range
0..126 instead of the full 0..127 range. This would lead us to allow
overwriting the last rule when we let the kernel pick-up the location.
Fixes: 3306145866 ("net: dsa: bcm_sf2: Move IPv4 CFP processing to specific functions")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vsprintf is incorrect. Instead of adding the read memory barrier
into vsprintf() which will cause a slight degradation to a commonly
used function in the kernel just to solve a very unlikely race
condition that can only happen at boot up, change the code from
using a variable branch to a static_branch. Not only does this solve
the race condition, it actually will improve the performance of
vsprintf() by removing the conditional branch that is only needed
at boot.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWvwtURQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6ql1NAP4g19xnu23+fPADOLWj8CShIGroIPvC
vNkg8UMNW6qWyAEA32aPJyRAC/hqqEgYbBBUHFNVyqdwZ38os7gnqzfBRwQ=
=Vw/o
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.17-rc5-vsprintf' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull memory barrier for from Steven Rostedt:
"The memory barrier usage in updating the random ptr hash for %p in
vsprintf is incorrect.
Instead of adding the read memory barrier into vsprintf() which will
cause a slight degradation to a commonly used function in the kernel
just to solve a very unlikely race condition that can only happen at
boot up, change the code from using a variable branch to a
static_branch.
Not only does this solve the race condition, it actually will improve
the performance of vsprintf() by removing the conditional branch that
is only needed at boot"
* tag 'trace-v4.17-rc5-vsprintf' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
vsprintf: Replace memory barrier with static_key for random_ptr_key update
stub_probe() calls put_busid_priv() in an error path when device isn't
found in the busid_table. Fix it by making put_busid_priv() safe to be
called with null struct bus_id_priv pointer.
This problem happens when "usbip bind" is run without loading usbip_host
driver and then running modprobe. The first failed bind attempt unbinds
the device from the original driver and when usbip_host is modprobed,
stub_probe() runs and doesn't find the device in its busid table and calls
put_busid_priv(0 with null bus_id_priv pointer.
usbip-host 3-10.2: 3-10.2 is not in match_busid table... skip!
[ 367.359679] =====================================
[ 367.359681] WARNING: bad unlock balance detected!
[ 367.359683] 4.17.0-rc4+ #5 Not tainted
[ 367.359685] -------------------------------------
[ 367.359688] modprobe/2768 is trying to release lock (
[ 367.359689]
==================================================================
[ 367.359696] BUG: KASAN: null-ptr-deref in print_unlock_imbalance_bug+0x99/0x110
[ 367.359699] Read of size 8 at addr 0000000000000058 by task modprobe/2768
[ 367.359705] CPU: 4 PID: 2768 Comm: modprobe Not tainted 4.17.0-rc4+ #5
Fixes: 22076557b0 ("usbip: usbip_host: fix NULL-ptr deref and use-after-free errors") in usb-linus
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The micrel KSZ9031 phy has a optional clock pin (CLK125_NDO) which can be
used as reference clock for the MAC unit. The clock signal must meet the
RGMII requirements to ensure the correct data transmission between the
MAC and the PHY. The KSZ9031 phy does not fulfill the duty cycle
requirement if the phy is configured as slave. For a complete
describtion look at the errata sheets: DS80000691D or DS80000692D.
The errata sheet recommends to force the phy into master mode whenever
there is a 1000Base-T link-up as work around. Only set the
"micrel,force-master" property if you use the phy reference clock provided
by CLK125_NDO pin as MAC reference clock in your application.
Attenation, this workaround is only usable if the link partner can
be configured to slave mode for 1000Base-T.
Signed-off-by: Markus Niebel <Markus.Niebel@tqs.de>
[m.felsch@pengutronix.de: fix dt-binding documentation]
[m.felsch@pengutronix.de: use already existing result var for read/write]
[m.felsch@pengutronix.de: add error handling]
[m.felsch@pengutronix.de: add more comments]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid using the kernel's irq_descriptor and return IRQ vector affinity
directly from the driver.
This fixes the following build break when CONFIG_SMP=n
include/linux/mlx5/driver.h: In function ‘mlx5_get_vector_affinity_hint’:
include/linux/mlx5/driver.h:1299:13: error:
‘struct irq_desc’ has no member named ‘affinity_hint’
Fixes: 6082d9c9c9 ("net/mlx5: Fix mlx5_get_vector_affinity function")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
CC: Randy Dunlap <rdunlap@infradead.org>
CC: Guenter Roeck <linux@roeck-us.net>
CC: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Israel Rukshin <israelr@mellanox.com>
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
When master device's mac has been changed, the commit
32c10bbfe9 ("ipvlan: always use the current L2 addr of the
master") makes the IPVlan devices's mac changed also, but it
doesn't do related works such as flush the IPVlan devices's
arp table.
Signed-off-by: Keefe Liu <liuqifa@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a comment here which says that DIV_ROUND_UP() and that's where
the problem comes from. Say you pick:
args->bpp = UINT_MAX - 7;
args->width = 4;
args->height = 1;
The integer overflow in DIV_ROUND_UP() means "cpp" is UINT_MAX / 8 and
because of how we picked args->width that means cpp < UINT_MAX / 4.
I've fixed it by preventing the integer overflow in DIV_ROUND_UP(). I
removed the check for !cpp because it's not possible after this change.
I also changed all the 0xffffffffU references to U32_MAX.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516140026.GA19340@mwanda
Reviewing Tobin's patches for getting pointers out early before
entropy has been established, I noticed that there's a lone smp_mb() in
the code. As with most lone memory barriers, this one appears to be
incorrectly used.
We currently basically have this:
get_random_bytes(&ptr_key, sizeof(ptr_key));
/*
* have_filled_random_ptr_key==true is dependent on get_random_bytes().
* ptr_to_id() needs to see have_filled_random_ptr_key==true
* after get_random_bytes() returns.
*/
smp_mb();
WRITE_ONCE(have_filled_random_ptr_key, true);
And later we have:
if (unlikely(!have_filled_random_ptr_key))
return string(buf, end, "(ptrval)", spec);
/* Missing memory barrier here. */
hashval = (unsigned long)siphash_1u64((u64)ptr, &ptr_key);
As the CPU can perform speculative loads, we could have a situation
with the following:
CPU0 CPU1
---- ----
load ptr_key = 0
store ptr_key = random
smp_mb()
store have_filled_random_ptr_key
load have_filled_random_ptr_key = true
BAD BAD BAD! (you're so bad!)
Because nothing prevents CPU1 from loading ptr_key before loading
have_filled_random_ptr_key.
But this race is very unlikely, but we can't keep an incorrect smp_mb() in
place. Instead, replace the have_filled_random_ptr_key with a static_branch
not_filled_random_ptr_key, that is initialized to true and changed to false
when we get enough entropy. If the update happens in early boot, the
static_key is updated immediately, otherwise it will have to wait till
entropy is filled and this happens in an interrupt handler which can't
enable a static_key, as that requires a preemptible context. In that case, a
work_queue is used to enable it, as entropy already took too long to
establish in the first place waiting a little more shouldn't hurt anything.
The benefit of using the static key is that the unlikely branch in
vsprintf() now becomes a nop.
Link: http://lkml.kernel.org/r/20180515100558.21df515e@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: ad67b74d24 ("printk: hash addresses printed with %p")
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
cleanup_trampoline() relocates the top-level page table out of
trampoline memory. We use 'top_pgtable' as our new top-level page table.
But if the 'top_pgtable' would be referenced from C in a usual way,
the address of the table will be calculated relative to RIP.
After kernel gets relocated, the address will be in the middle of
decompression buffer and the page table may get overwritten.
This leads to a crash.
We calculate the address of other page tables relative to the relocation
address. It makes them safe. We should do the same for 'top_pgtable'.
Calculate the address of 'top_pgtable' in assembly and pass down to
cleanup_trampoline().
Move the page table to .pgtable section where the rest of page tables
are. The section is @nobits so we save 4k in kernel image.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: e9d0e6330e ("x86/boot/compressed/64: Prepare new top-level page table for trampoline")
Link: http://lkml.kernel.org/r/20180516080131.27913-3-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Eric and Hugh have reported instant reboot due to my recent changes in
decompression code.
The root cause is that I didn't realize that we need to adjust GOT to be
able to run C code that early.
The problem is only visible with an older toolchain. Binutils >= 2.24 is
able to eliminate GOT references by replacing them with RIP-relative
address loads:
https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commitdiff;h=80d873266dec
We need to adjust GOT two times:
- before calling paging_prepare() using the initial load address
- before calling C code from the relocated kernel
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 194a9749c7 ("x86/boot/compressed/64: Handle 5-level paging boot if kernel is above 4G")
Link: http://lkml.kernel.org/r/20180516080131.27913-2-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The filesystem freezing code needs to transfer ownership of a rwsem
embedded in a percpu-rwsem from the task that does the freezing to
another one that does the thawing by calling percpu_rwsem_release()
after freezing and percpu_rwsem_acquire() before thawing.
However, the new rwsem debug code runs afoul with this scheme by warning
that the task that releases the rwsem isn't the one that acquires it,
as reported by Amir Goldstein:
DEBUG_LOCKS_WARN_ON(sem->owner != get_current())
WARNING: CPU: 1 PID: 1401 at /home/amir/build/src/linux/kernel/locking/rwsem.c:133 up_write+0x59/0x79
Call Trace:
percpu_up_write+0x1f/0x28
thaw_super_locked+0xdf/0x120
do_vfs_ioctl+0x270/0x5f1
ksys_ioctl+0x52/0x71
__x64_sys_ioctl+0x16/0x19
do_syscall_64+0x5d/0x167
entry_SYSCALL_64_after_hwframe+0x49/0xbe
To work properly with the rwsem debug code, we need to annotate that the
rwsem ownership is unknown during the tranfer period until a brave soul
comes forward to acquire the ownership. During that period, optimistic
spinning will be disabled.
Reported-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jan Kara <jack@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Theodore Y. Ts'o <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-fsdevel@vger.kernel.org
Link: http://lkml.kernel.org/r/1526420991-21213-3-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are use cases where a rwsem can be acquired by one task, but
released by another task. In thess cases, optimistic spinning may need
to be disabled. One example will be the filesystem freeze/thaw code
where the task that freezes the filesystem will acquire a write lock
on a rwsem and then un-owns it before returning to userspace. Later on,
another task will come along, acquire the ownership, thaw the filesystem
and release the rwsem.
Bit 0 of the owner field was used to designate that it is a reader
owned rwsem. It is now repurposed to mean that the owner of the rwsem
is not known. If only bit 0 is set, the rwsem is reader owned. If bit
0 and other bits are set, it is writer owned with an unknown owner.
One such value for the latter case is (-1L). So we can set owner to 1 for
reader-owned, -1 for writer-owned. The owner is unknown in both cases.
To handle transfer of rwsem ownership, the higher level code should
set the owner field to -1 to indicate a write-locked rwsem with unknown
owner. Optimistic spinning will be disabled in this case.
Once the higher level code figures who the new owner is, it can then
set the owner field accordingly.
Tested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jan Kara <jack@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Theodore Y. Ts'o <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-fsdevel@vger.kernel.org
Link: http://lkml.kernel.org/r/1526420991-21213-2-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
SOU primary plane prepare_fb hook depends upon dmabuf_size to pin up BO
(and not call a new vmw_dmabuf_init) when a new fb size is same as
current fb. This was changed in a recent commit which is causing
page_flip to fail on VM with low display memory and multi-mon failure
when cycle monitors from secondary display.
Cc: <stable@vger.kernel.org> # 4.14, 4.16
Fixes: 20fb5a635a ("drm/vmwgfx: Unpin the screen object backup buffer when not used")
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
User-space may invoke ibv_reg_mr and ibv_dereg_mr in different threads.
If ibv_dereg_mr is called after the thread which invoked ibv_reg_mr has
exited, get_pid_task will return NULL and ib_umem_release will not
decrease mm->pinned_vm.
Instead of using threads to locate the mm, use the overall tgid from the
ib_ucontext struct instead. This matches the behavior of ODP and
disassociate in handling the mm of the process that called ibv_reg_mr.
Cc: <stable@vger.kernel.org>
Fixes: 87773dd56d ("IB: ib_umem_release() should decrement mm->pinned_vm from ib_umem_get")
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Clock driver is mandatory if the machine is selected.
Then don't use 'bool' and 'depends on' commands, but 'def_bool'
with the machine(s).
Fixes: da32d3539f ("clk: stm32: add configuration flags for each of the stm32 drivers")
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
On i.MX6 ULL using PLL3 seems to cause a freeze when setting
the parent to IMX6UL_CLK_PLL3_USB_OTG. This only seems to appear
since commit 6f9575e556 ("clk: imx: Add CLK_IS_CRITICAL flag
for busy divider and busy mux"), probably because the clock is
now forced to be on.
Fixes: 6f9575e55632("clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
They are needed for DM6467 EVM to work. The first patch fixes an
issue with timer interrupt and the second two are needed for video
driver to probe successfully.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Ep7k
-----END PGP SIGNATURE-----
Merge tag 'davinci-fixes-for-v4.17-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes
Second set of fixes for TI DaVinci.
They are needed for DM6467 EVM to work. The first patch fixes an
issue with timer interrupt and the second two are needed for video
driver to probe successfully.
* tag 'davinci-fixes-for-v4.17-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: board-dm646x-evm: set VPIF capture card name
ARM: davinci: board-dm646x-evm: pass correct I2C adapter id for VPIF
ARM: davinci: dm646x: fix timer interrupt generation
Signed-off-by: Olof Johansson <olof@lixom.net>
for_each_cpu() unintuitively reports CPU0 as set independent of the actual
cpumask content on UP kernels. This causes an unexpected PIT interrupt
storm on a UP kernel running in an SMP virtual machine on Hyper-V, and as
a result, the virtual machine can suffer from a strange random delay of 1~20
minutes during boot-up, and sometimes it can hang forever.
Protect if by checking whether the cpumask is empty before entering the
for_each_cpu() loop.
[ tglx: Use !IS_ENABLED(CONFIG_SMP) instead of #ifdeffery ]
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poulson <jopoulso@microsoft.com>
Cc: "Michael Kelley (EOSG)" <Michael.H.Kelley@microsoft.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: stable@vger.kernel.org
Cc: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Jork Loeser <Jork.Loeser@microsoft.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: KY Srinivasan <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Link: https://lkml.kernel.org/r/KL1P15301MB000678289FE55BA365B3279ABF990@KL1P15301MB0006.APCP153.PROD.OUTLOOK.COM
Link: https://lkml.kernel.org/r/KL1P15301MB0006FA63BC22BEB64902EAA0BF930@KL1P15301MB0006.APCP153.PROD.OUTLOOK.COM
-----BEGIN PGP SIGNATURE-----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=1ow3
-----END PGP SIGNATURE-----
Merge tag 'afs-fixes-20180514' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
"Here's a set of patches that fix a number of bugs in the in-kernel AFS
client, including:
- Fix directory locking to not use individual page locks for
directory reading/scanning but rather to use a semaphore on the
afs_vnode struct as the directory contents must be read in a single
blob and data from different reads must not be mixed as the entire
contents may be shuffled about between reads.
- Fix address list parsing to handle port specifiers correctly.
- Only give up callback records on a server if we actually talked to
that server (we might not be able to access a server).
- Fix some callback handling bugs, including refcounting,
whole-volume callbacks and when callbacks actually get broken in
response to a CB.CallBack op.
- Fix some server/address rotation bugs, including giving up if we
can't probe a server; giving up if a server says it doesn't have a
volume, but there are more servers to try.
- Fix the decoding of fetched statuses to be OpenAFS compatible.
- Fix the handling of server lookups in Cache Manager ops (such as
CB.InitCallBackState3) to use a UUID if possible and to handle no
server being found.
- Fix a bug in server lookup where not all addresses are compared.
- Fix the non-encryption of calls that prevents some servers from
being accessed (this also requires an AF_RXRPC patch that has
already gone in through the net tree).
There's also a patch that adds tracepoints to log Cache Manager ops
that don't find a matching server, either by UUID or by address"
* tag 'afs-fixes-20180514' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix the non-encryption of calls
afs: Fix CB.CallBack handling
afs: Fix whole-volume callback handling
afs: Fix afs_find_server search loop
afs: Fix the handling of an unfound server in CM operations
afs: Add a tracepoint to record callbacks from unlisted servers
afs: Fix the handling of CB.InitCallBackState3 to find the server by UUID
afs: Fix VNOVOL handling in address rotation
afs: Fix AFSFetchStatus decoder to provide OpenAFS compatibility
afs: Fix server rotation's handling of fileserver probe failure
afs: Fix refcounting in callback registration
afs: Fix giving up callbacks on server destruction
afs: Fix address list parsing
afs: Fix directory page locking
Two small driver fixes: aacraid to fix an unknown IU type on task
management functions which causes a firmware fault and vmw_pvscsi to
change a return code to retry the operation instead of causing an
immediate error
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCWvr5eSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYuMAQD/pZVn
gytFVqSbGmTbSLUQYU/lQvfj1ql+UOVm4FqbIAEAzpePiCO6tacAoQgasHGw9/gm
+sg9Iy4ys0LCyWbQwdI=
=4KNl
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small driver fixes: aacraid to fix an unknown IU type on task
management functions which causes a firmware fault and vmw_pvscsi to
change a return code to retry the operation instead of causing an
immediate error"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: aacraid: Correct hba_send to include iu_type
scsi: vmw-pvscsi: return DID_BUS_BUSY for adapter-initated aborts
-----BEGIN PGP SIGNATURE-----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=4NJV
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.17-rc6-urgent' of git://people.freedesktop.org/~airlied/linux
Pull drm fix from Dave Airlie:
"This fixes the mmap regression reported to me on irc by an i686 kernel
user today, he's tested the fix works, and I've audited all the drm
drivers for the bad mmap usage and since we use the mmap offset as a
lookup in a table we aren't inclined to have anything bad in there"
[ See commit be83bbf806 ("mmap: introduce sane default mmap limits")
for details and the note on why the GPU drivers were expected to be a
special case. - Linus ]
* tag 'drm-fixes-for-v4.17-rc6-urgent' of git://people.freedesktop.org/~airlied/linux:
drm: set FMODE_UNSIGNED_OFFSET for drm files
The __DIVIDE() macro checks whether it is called with a 32-bit or 64-bit
dividend, to select the appropriate divide-and-round-up routine.
As the check uses the ternary operator, the result will always be
promoted to a type that can hold both results, i.e. unsigned long long.
When using this result in a division on a 32-bit system, this may lead
to link errors like:
ERROR: "__udivdi3" [drivers/mtd/nand/raw/nand.ko] undefined!
Fix this by casting the result of the division to the type of the
dividend.
Fixes: 8878b126df ("mtd: nand: add ->exec_op() implementation")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
kvm_read_guest() will eventually look up in kvm_memslots(), which requires
either to hold the kvm->slots_lock or to be inside a kvm->srcu critical
section.
In contrast to x86 and s390 we don't take the SRCU lock on every guest
exit, so we have to do it individually for each kvm_read_guest() call.
Use the newly introduced wrapper for that.
Cc: Stable <stable@vger.kernel.org> # 4.12+
Reported-by: Jan Glauber <jan.glauber@caviumnetworks.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_read_guest() will eventually look up in kvm_memslots(), which requires
either to hold the kvm->slots_lock or to be inside a kvm->srcu critical
section.
In contrast to x86 and s390 we don't take the SRCU lock on every guest
exit, so we have to do it individually for each kvm_read_guest() call.
Provide a wrapper which does that and use that everywhere.
Note that ending the SRCU critical section before returning from the
kvm_read_guest() wrapper is safe, because the data has been *copied*, so
we don't need to rely on valid references to the memslot anymore.
Cc: Stable <stable@vger.kernel.org> # 4.8+
Reported-by: Jan Glauber <jan.glauber@caviumnetworks.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Apparently the development of update_affinity() overlapped with the
promotion of irq_lock to be _irqsave, so the patch didn't convert this
lock over. This will make lockdep complain.
Fix this by disabling IRQs around the lock.
Cc: stable@vger.kernel.org
Fixes: 08c9fd0421 ("KVM: arm/arm64: vITS: Add a helper to update the affinity of an LPI")
Reported-by: Jan Glauber <jan.glauber@caviumnetworks.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As Jan reported [1], lockdep complains about the VGIC not being bullet
proof. This seems to be due to two issues:
- When commit 006df0f349 ("KVM: arm/arm64: Support calling
vgic_update_irq_pending from irq context") promoted irq_lock and
ap_list_lock to _irqsave, we forgot two instances of irq_lock.
lockdeps seems to pick those up.
- If a lock is _irqsave, any other locks we take inside them should be
_irqsafe as well. So the lpi_list_lock needs to be promoted also.
This fixes both issues by simply making the remaining instances of those
locks _irqsave.
One irq_lock is addressed in a separate patch, to simplify backporting.
[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2018-May/575718.html
Cc: stable@vger.kernel.org
Fixes: 006df0f349 ("KVM: arm/arm64: Support calling vgic_update_irq_pending from irq context")
Reported-by: Jan Glauber <jan.glauber@caviumnetworks.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Failure to synchronize the tunneled operations does not prevent
the initialization of the cxl card. This patch reports the tunneled
operations status via /sys.
Signed-off-by: Philippe Bergheaud <felix@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Skiboot used to set the default Tunnel BAR register value when capi
mode was enabled. This approach was ok for the cxl driver, but
prevented other drivers from choosing different values.
Skiboot versions > 5.11 will not set the default value any longer.
This patch modifies the cxl driver to set/reset the Tunnel BAR
register when entering/exiting the cxl mode, with
pnv_pci_set_tunnel_bar().
That should work with old skiboot (since we are re-writing the value
already set) and new skiboot.
mpe: The tunnel support was only merged into Linux recently, in commit
d6a90bb83b ("powerpc/powernv: Enable tunneled operations")
(v4.17-rc1), so with new skiboot kernels between that commit and this
will not work correctly.
Fixes: d6a90bb83b ("powerpc/powernv: Enable tunneled operations")
Signed-off-by: Philippe Bergheaud <felix@linux.ibm.com>
Reviewed-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anthoine reported:
The period used by Windows change over time but it can be 1
milliseconds or less. I saw the limit_periodic_timer_frequency
print so 500 microseconds is sometimes reached.
As suggested by Paolo, lower the default timer frequency limit to a
smaller interval of 200 us (5000 Hz) to leave some headroom. This
is required due to Windows 10 changing the scheduler tick limit
from 1024 Hz to 2048 Hz.
Reported-by: Anthoine Bourgeois <anthoine.bourgeois@blade-group.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Anthoine Bourgeois <anthoine.bourgeois@blade-group.com>
Cc: Darren Kenny <darren.kenny@oracle.com>
Cc: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VPIF capture driver expects card name to be set since it
uses it without checking for NULL. The commit which
introduced VPIF display and capture support added card
name only for display, not for capture.
Set it in platform data to probe driver successfully.
While at it, also fix the display card name to something more
appropriate.
Fixes: 85609c1ccd ("DaVinci: DM646x - platform changes for vpif capture and display drivers")
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
commit a16cb91ad9 ("[media] media: vpif: use a configurable
i2c_adapter_id for vpif display") removed hardcoded I2C adaptor
setting in VPIF driver, but missed updating platform data passed
from DM646x board.
Fix it.
Fixes: a16cb91ad9 ("[media] media: vpif: use a configurable i2c_adapter_id for vpif display")
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Nicholas Piggin