Commit Graph

166 Commits

Author SHA1 Message Date
Andy Shevchenko 5b17aecfcd lib/vsprintf: factor out %pN[F] handler as netdev_bits()
Move switch case to the netdev_features_string() and rename it to
netdev_bits().  In the future we can extend it as needed.

Here we replace the fallback of %pN from '%p' with possible flags to
sticter '0x%p' without any flags variation.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 11:17:30 -08:00
Andy Shevchenko 3cab1e7112 lib/vsprintf: refactor duplicate code to special_hex_number()
special_hex_number() is a helper to print a fixed size type in a hex
format with '0x' prefix, zero padding, and small letters.  In the module
we have already several copies of such code.  Consolidate them under
special_hex_number() helper.

There are couple of differences though.

It seems nobody cared about the output in case of CONFIG_KALLSYMS=n,
when printing symbol address, because the asked field width is not
enough to care last 2 characters in the string represantation of the
pointer.  Fixed here.

The %pNF specifier used to be allowed with a specific field width,
though there is neither any user of it nor mention the possibility in
the documentation.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 11:17:30 -08:00
Rasmus Villemoes 4d72ba014b lib/vsprintf.c: warn about too large precisions and field widths
The field width is overloaded to pass some extra information for some %p
extensions (e.g.  #bits for %pb).  But we might silently truncate the
passed value when we stash it in struct printf_spec (see e.g.
"lib/vsprintf.c: expand field_width to 24 bits").  Hopefully 23 value
bits should now be enough for everybody, but if not, let's make some
noise.

Do the same for the precision.  In both cases, clamping seems more
sensible than truncating.  While, according to POSIX, "A negative
precision is taken as if the precision were omitted.", the kernel's
printf has always treated that case as if the precision was 0, so we use
that as lower bound.  For the field width, the smallest representable
value is actually -(1<<23), but a negative field width means 'set the
LEFT flag and use the absolute value', so we want the absolute value to
fit.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Maurizio Lombardi <mlombard@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 11:17:27 -08:00
Rasmus Villemoes 1c7a8e622e lib/vsprintf.c: help gcc make number() smaller
One consequence of the reorganization of struct printf_spec to make
field_width 24 bits was that number() gained about 180 bytes.  Since
spec is never passed to other functions, we can help gcc make number()
lose most of that extra weight by using local variables for the field
width and precision.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Maurizio Lombardi <mlombard@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 11:17:26 -08:00
Rasmus Villemoes d048419311 lib/vsprintf.c: expand field_width to 24 bits
Maurizio Lombardi reported a problem [1] with the %pb extension: It
doesn't work for sufficiently large bitmaps, since the size is stashed
in the field_width field of the struct printf_spec, which is currently
an s16.  Concretely, this manifested itself in
/sys/bus/pseudo/drivers/scsi_debug/map being empty, since the bitmap
printer got a size of 0, which is the 16 bit truncation of the actual
bitmap size.

We do want to keep struct printf_spec at 8 bytes so that it can cheaply
be passed by value.  The qualifier field is only used for internal
bookkeeping in format_decode, so we might as well use a local variable
for that.  This gives us an additional 8 bits, which we can then use for
the field width.

To stay in 8 bytes, we need to do a little rearranging and make the type
member a bitfield as well.  For consistency, change all the members to
bit fields.  gcc doesn't generate much worse code with these changes (in
fact, bloat-o-meter says we save 300 bytes - which I think is a little
surprising).

I didn't find a BUILD_BUG/compiletime_assertion/... which would work
outside function context, so for now I just open-coded it.

[1] http://thread.gmane.org/gmane.linux.kernel/2034835

[akpm@linux-foundation.org: avoid open-coded BUILD_BUG_ON]
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reported-by: Maurizio Lombardi <mlombard@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 11:17:26 -08:00
Rasmus Villemoes 34fc8b9076 lib/vsprintf.c: eliminate potential race in string()
If the string corresponding to a %s specifier can change under us, we
might end up copying a \0 byte to the output buffer.  There might be
callers who expect the output buffer to contain a genuine C string whose
length is exactly the snprintf return value (assuming truncation hasn't
happened or has been checked for).

We can avoid this by only passing over the source string once, stopping
the first time we meet a nul byte (or when we reach the given
precision), and then letting widen_string() handle left/right space
padding.  As a small bonus, this code reuse also makes the generated
code slightly smaller.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Maurizio Lombardi <mlombard@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 11:17:26 -08:00
Rasmus Villemoes 95508cfa10 lib/vsprintf.c: move string() below widen_string()
This is pure code movement, making sure the widen_string() helper is
defined before the string() function.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Maurizio Lombardi <mlombard@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 11:17:26 -08:00
Rasmus Villemoes cfccde04e2 lib/vsprintf.c: pull out padding code from dentry_name()
Pull out the logic in dentry_name() which handles field width space
padding, in preparation for reusing it from string().  Rename the
widen() helper to move_right(), since it is used for handling the
!(flags & LEFT) case.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Maurizio Lombardi <mlombard@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-16 11:17:25 -08:00
Dmitry Monakhov 1031bc5892 lib/vsprintf: add %*pg format specifier
This allow to directly print block_device name.
Currently one should use bdevname() with temporal char buffer.
This is very ineffective because bloat stack usage for deep IO call-traces

Example:
	%pg  ->    sda, sda1 or loop0p1

[AV: fixed a minor braino - position updates should not be dependent
upon having reached the of buffer]

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-06 12:55:29 -05:00
Rasmus Villemoes d7ec9a05d6 lib/vsprintf.c: update documentation
%n is no longer just ignored; it results in early return from vsnprintf.
Also add a request to add test cases for future %p extensions.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Rasmus Villemoes 80c9eb46fa lib/vsprintf.c: remove SPECIAL handling in pointer()
As a quick

   git grep -E '%[ +0#-]*#[ +0#-]*(\*|[0-9]+)?(\.(\*|[0-9]+)?)?p'

shows, nobody uses the # flag with %p. Should one try to do so, one
will be met with

  warning: `#' flag used with `%p' gnu_printf format [-Wformat]

(POSIX and C99 both say "... For other conversion specifiers, the
behavior is undefined.". Obviously, the kernel can choose to define
the behaviour however it wants, but as long as gcc issues that
warning, users are unlikely to show up.)

Since default_width is effectively always 2*sizeof(void*), we can
simplify the prologue of pointer() and save a few instructions.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Martin Kletzander <mkletzan@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Rasmus Villemoes 762abb5154 lib/vsprintf.c: also improve sanity check in bstr_printf()
Quoting from 2aa2f9e21e ("lib/vsprintf.c: improve sanity check in
vsnprintf()"):

    On 64 bit, size may very well be huge even if bit 31 happens to be 0.
    Somehow it doesn't feel right that one can pass a 5 GiB buffer but not a
    3 GiB one.  So cap at INT_MAX as was probably the intention all along.
    This is also the made-up value passed by sprintf and vsprintf.

I should have seen this copy-pasted instance back then, but let's just
do it now.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Martin Kletzander <mkletzan@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Rasmus Villemoes b006f19b05 lib/vsprintf.c: handle invalid format specifiers more robustly
If we meet any invalid or unsupported format specifier, 'handling' it by
just printing it as a literal string is not safe: Presumably the format
string and the arguments passed gcc's type checking, but that means
something like sprintf(buf, "%n %pd", &intvar, dentry) would end up
interpreting &intvar as a struct dentry*.

When the offending specifier was %n it used to be at the end of the format
string, but we can't rely on that always being the case.  Also, gcc
doesn't complain about some more or less exotic qualifiers (or 'length
modifiers' in posix-speak) such as 'j' or 'q', but being unrecognized by
the kernel's printf implementation, they'd be interpreted as unknown
specifiers, and the rest of arguments would be interpreted wrongly.

So let's complain about anything we don't understand, not just %n, and
stop pretending that we'd be able to make sense of the rest of the
format/arguments.  If the offending specifier is in a printk() call we
unfortunately only get a "BUG: recent printk recursion!", but at least
direct users of the sprintf family will be caught.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Martin Kletzander <mkletzan@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Martin Kletzander 5e4ee7b13b printk: synchronize %p formatting documentation
Move all pointer-formatting documentation to one place in the code and one
place in the documentation instead of keeping it in three places with
different level of completeness.  Documentation/printk-formats.txt has
detailed information about each modifier, docstring above pointer() has
short descriptions of them (as that is the function dealing with %p) and
docstring above vsprintf() is removed as redundant.  Both docstrings in
the code that were modified are updated with a reminder of updating the
documentation upon any further change.

[akpm@linux-foundation.org: fix comment]
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06 17:50:42 -08:00
Stephen Boyd 0d1d7a5588 lib/vsprintf.c: Include clk.h
This file uses the clk API so it should include clk.h directly
instead of indirectly including it through clk-provider.h.

Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20 10:52:48 -07:00
Rasmus Villemoes 675cf53c1d lib/vsprintf.c: improve put_dec_trunc8 slightly
I hadn't had enough coffee when I wrote this. Currently, the final
increment of buf depends on the value loaded from the table, and
causes gcc to emit a cmov immediately before the return. It is smarter
to let it depend on r, since the increment can then be computed in
parallel with the final load/store pair. It also shaves 16 bytes of
.text.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17 09:03:55 -04:00
Rasmus Villemoes 7c43d9a30c lib/vsprintf.c: even faster binary to decimal conversion
The most expensive part of decimal conversion is the divisions by 10
(albeit done using reciprocal multiplication with appropriately chosen
constants).  I decided to see if one could eliminate around half of
these multiplications by emitting two digits at a time, at the cost of a
200 byte lookup table, and it does indeed seem like there is something
to be gained, especially on 64 bits.  Microbenchmarking shows
improvements ranging from -50% (for numbers uniformly distributed in [0,
2^64-1]) to -25% (for numbers heavily biased toward the smaller end, a
more realistic distribution).

On a larger scale, perf shows that top, one of the big consumers of /proc
data, uses 0.5-1.0% fewer cpu cycles.

I had to jump through some hoops to get the 32 bit code to compile and run
on my 64 bit machine, so I'm not sure how relevant these numbers are, but
just for comparison the microbenchmark showed improvements between -30%
and -10%.

The bloat-o-meter costs are around 150 bytes (the generated code is a
little smaller, so it's not the full 200 bytes) on both 32 and 64 bit.
I'm aware that extra cache misses won't show up in a microbenchmark as
used above, but on the other hand decimal conversions often happen in bulk
(for example in the case of top).

I have of course tested that the new code generates the same output as the
old, for both the first and last 1e10 numbers in [0,2^64-1] and 4e9
'random' numbers in-between.

Test and verification code on github: https://github.com/Villemoes/dec.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Tested-by: Jeff Epler <jepler@unpythonic.net>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-17 09:03:54 -04:00
Rasmus Villemoes 41416f2330 lib/string_helpers.c: change semantics of string_escape_mem
The current semantics of string_escape_mem are inadequate for one of its
current users, vsnprintf().  If that is to honour its contract, it must
know how much space would be needed for the entire escaped buffer, and
string_escape_mem provides no way of obtaining that (short of allocating a
large enough buffer (~4 times input string) to let it play with, and
that's definitely a big no-no inside vsnprintf).

So change the semantics for string_escape_mem to be more snprintf-like:
Return the size of the output that would be generated if the destination
buffer was big enough, but of course still only write to the part of dst
it is allowed to, and (contrary to snprintf) don't do '\0'-termination.
It is then up to the caller to detect whether output was truncated and to
append a '\0' if desired.  Also, we must output partial escape sequences,
otherwise a call such as snprintf(buf, 3, "%1pE", "\123") would cause
printf to write a \0 to buf[2] but leaving buf[0] and buf[1] with whatever
they previously contained.

This also fixes a bug in the escaped_string() helper function, which used
to unconditionally pass a length of "end-buf" to string_escape_mem();
since the latter doesn't check osz for being insanely large, it would
happily write to dst.  For example, kasprintf(GFP_KERNEL, "something and
then %pE", ...); is an easy way to trigger an oops.

In test-string_helpers.c, the -ENOMEM test is replaced with testing for
getting the expected return value even if the buffer is too small.  We
also ensure that nothing is written (by relying on a NULL pointer deref)
if the output size is 0 by passing NULL - this has to work for
kasprintf("%pE") to work.

In net/sunrpc/cache.c, I think qword_add still has the same semantics.
Someone should definitely double-check this.

In fs/proc/array.c, I made the minimum possible change, but longer-term it
should stop poking around in seq_file internals.

[andriy.shevchenko@linux.intel.com: simplify qword_add]
[andriy.shevchenko@linux.intel.com: add missed curly braces]
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:24 -07:00
Rasmus Villemoes 9c98f23596 lib/vsprintf.c: fix potential NULL deref in hex_string
The helper hex_string() is broken in two ways.  First, it doesn't
increment buf regardless of whether there is room to print, so callers
such as kasprintf() that try to probe the correct storage to allocate will
get a too small return value.  But even worse, kasprintf() (and likely
anyone else trying to find the size of the result) pass NULL for buf and 0
for size, so we also have end == NULL.  But this means that the end-1 in
hex_string() is (char*)-1, so buf < end-1 is true and we get a NULL
pointer deref.  I double-checked this with a trivial kernel module that
just did a kasprintf(GFP_KERNEL, "%14ph", "CrashBoomBang").

Nobody seems to be using %ph with kasprintf, but we might as well fix it
before it hits someone.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:23 -07:00
Geert Uytterhoeven 900cca2944 lib/vsprintf: add %pC{,n,r} format specifiers for clocks
Add format specifiers for printing struct clk:
  - '%pC' or '%pCn': name (Common Clock Framework) or address (legacy
    clock framework) of the clock,
  - '%pCr': rate of the clock.

[akpm@linux-foundation.org: omit code if !CONFIG_HAVE_CLK]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:23 -07:00
Rasmus Villemoes d1c1b12137 lib/vsprintf.c: another small hack
Making ZEROPAD == '0'-' ', we can eliminate a few more instructions.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:23 -07:00
Rasmus Villemoes 3ea8d440a8 lib/vsprintf.c: eliminate duplicate hex string array
gcc doesn't merge or overlap const char[] objects with identical contents
(probably language lawyers would also insist that these things have
different addresses), but there's no reason to have the string
"0123456789ABCDEF" occur in multiple places.  hex_asc_upper is declared in
kernel.h and defined in lib/hexdump.c, which is unconditionally compiled
in.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:23 -07:00
Rasmus Villemoes e26c12c777 lib/vsprintf.c: reduce stack use in number()
At least since the initial git commit, when base was passed as a separate
parameter, number() has only been called with bases 8, 10 and 16.  I'm
guessing that 66 was to accommodate 64 0/1, a sign and a '\0', but the
buffer is only used for the actual digits.  Octal digits carry 3 bits of
information, so 24 is enough.  Spell that 3*sizeof(num) so one less place
needs to be changed should long long ever be 128 bits.  Also remove the
commented-out code that would handle an arbitrary base.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:23 -07:00
Rasmus Villemoes 51be17dfff lib/vsprintf.c: eliminate some branches
Since FORMAT_TYPE_INT is simply 1 more than FORMAT_TYPE_UINT, and
similarly for BYTE/UBYTE, SHORT/USHORT, LONG/ULONG, we can eliminate a few
instructions by making SIGN have the value 1 instead of 2, and then use
arithmetic instead of branches for computing the right spec->type.  It's a
little hacky, but certainly in the same spirit as SMALL needing to have
the value 0x20.  For example for the spec->qualifier == 'l' case, gcc now
generates

     75e:       0f b6 53 01             movzbl 0x1(%rbx),%edx
     762:       83 e2 01                and    $0x1,%edx
     765:       83 c2 09                add    $0x9,%edx
     768:       88 13                   mov    %dl,(%rbx)

instead of

     763:       0f b6 53 01             movzbl 0x1(%rbx),%edx
     767:       83 e2 02                and    $0x2,%edx
     76a:       80 fa 01                cmp    $0x1,%dl
     76d:       19 d2                   sbb    %edx,%edx
     76f:       83 c2 0a                add    $0xa,%edx
     772:       88 13                   mov    %dl,(%rbx)

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15 16:35:23 -07:00
Tejun Heo dbc760bcc1 lib/vsprintf: implement bitmap printing through '%*pb[l]'
bitmap and its derivatives such as cpumask and nodemask currently only
provide formatting functions which put the output string into the
provided buffer; however, how long this buffer should be isn't defined
anywhere and given that some of these bitmaps can be too large to be
formatted into an on-stack buffer it users sometimes are unnecessarily
forced to come up with creative solutions and compromises for the
buffer just to printk these bitmaps.

There have been a couple different attempts at making this easier.

1. Way back, PeterZ tried printk '%pb' extension with the precision
   for bit width - '%.*pb'.  This was intuitive and made sense but
   unfortunately triggered a compile warning about using precision
   for a pointer.

   http://lkml.kernel.org/g/1336577562.2527.58.camel@twins

2. I implemented bitmap_pr_cont[_list]() and its wrappers for cpumask
   and nodemask.  This works but PeterZ pointed out that pr_cont's
   tendency to produce broken lines when multiple CPUs are printing is
   bothering considering the usages.

   http://lkml.kernel.org/g/1418226774-30215-3-git-send-email-tj@kernel.org

So, this patch is another attempt at teaching printk and friends how
to print bitmaps.  It's almost identical to what PeterZ tried with
precision but it uses the field width for the number of bits instead
of precision.  The format used is '%*pb[l]', with the optional
trailing 'l' specifying list format instead of hex masks.

This is a valid format string and doesn't trigger compiler warnings;
however, it does make it impossible to specify output field width when
printing bitmaps.  I think this is an acceptable trade-off given how
much easier it makes printing bitmaps and that we don't have any
in-kernel user which is using the field width specification.  If any
future user wants to use field width with a bitmap, it'd have to
format the bitmap into a string buffer and then print that buffer with
width spec, which isn't different from how it should be done now.

This patch implements bitmap[_list]_string() which are called from the
vsprintf pointer() formatting function.  The implementation is mostly
identical to bitmap_scn[list]printf() except that the output is
performed in the vsprintf way.  These functions handle formatting into
too small buffers and sprintf() family of functions report the correct
overrun output length.

bitmap_scn[list]printf() are now thin wrappers around scnprintf().

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Mike Travis <travis@sgi.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13 21:21:36 -08:00
Rasmus Villemoes 43e5b666cf lib/vsprintf.c: replace while with do-while in skip_atoi
All callers of skip_atoi have already checked for the first character
being a digit.  In this case, gcc generates simpler code for a do
while-loop.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 18:54:13 -08:00
Rasmus Villemoes 2aa2f9e21e lib/vsprintf.c: improve sanity check in vsnprintf()
On 64 bit, size may very well be huge even if bit 31 happens to be 0.
Somehow it doesn't feel right that one can pass a 5 GiB buffer but not a
3 GiB one.  So cap at INT_MAX as was probably the intention all along.
This is also the made-up value passed by sprintf and vsprintf.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 18:54:13 -08:00
Rasmus Villemoes ffbfed03b4 lib/vsprintf.c: consume 'p' in format_decode
It seems a little simpler to consume the p from a %p specifier in
format_decode, just as it is done for the surrounding %c, %s and %% cases.

While there, delete a redundant and misplaced comment.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 18:54:13 -08:00
Andy Shevchenko 71dca95d5c lib/vsprintf: add %*pE[achnops] format specifier
This allows user to print a given buffer as an escaped string.  The
rules are applied according to an optional mix of flags provided by
additional format letters.

For example, if the given buffer is:

    1b 62 20 5c 43 07 22 90 0d 5d

The result strings would be:
    %*pE            "\eb \C\a"\220\r]"
    %*pEhp          "\x1bb \C\x07"\x90\x0d]"
    %*pEa           "\e\142\040\\\103\a\042\220\r\135"

Please, read Documentation/printk-formats.txt and lib/string_helpers.c
kernel documentation to get further information.

[akpm@linux-foundation.org: tidy up comment layout, per Joe]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Joe Perches <joe@perches.com>
Cc: "John W . Linville" <linville@tuxdriver.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14 02:18:26 +02:00
Masanari Iida da3dae54e4 Documentation: Docbook: Fix generated DocBook/kernel-api.xml
This patch fix spelling typo found in DocBook/kernel-api.xml.
It is because the file is generated from the source comments,
I have to fix the comments in source codes.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-09 10:34:56 +02:00
Fabian Frederick 3f623eba2a lib/vsprintf.c: fix comparison to bool
Fixing 2 coccinelle warnings:
lib/vsprintf.c:2350:2-9: WARNING: Assignment of bool to 0/1
lib/vsprintf.c:2389:3-10: WARNING: Assignment of bool to 0/1

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:18 -07:00
Ryan Mallon 708d96fd06 vsprintf: remove %n handling
All in-kernel users of %n in format strings have now been removed and
the %n directive is ignored.  Remove the handling of %n so that it is
treated the same as any other invalid format string directive.  Keep a
warning in place to deter new instances of %n in format strings.

Signed-off-by: Ryan Mallon <rmallon@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:07 -07:00
Bjorn Helgaas d19cb803a2 vsprintf: Add support for IORESOURCE_UNSET in %pR
Sometimes we have a struct resource where we know the type (MEM/IO/etc.)
and the size, but we haven't assigned address space for it.  The
IORESOURCE_UNSET flag is a way to indicate this situation.  For these
"unset" resources, the start address is meaningless, so print only the
size, e.g.,

  - pci 0000:0c:00.0: reg 184: [mem 0x00000000-0x00001fff 64bit]
  + pci 0000:0c:00.0: reg 184: [mem size 0x2000 64bit]

For %pr (printing with raw flags), we still print the address range,
because %pr is mostly used for debugging anyway.

Thanks to Fengguang Wu <fengguang.wu@intel.com> for suggesting
resource_size().

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-26 14:42:09 -07:00
Joe Perches aaf07621b8 vsprintf: add %pad extension for dma_addr_t use
dma_addr_t's can be either u32 or u64 depending on a CONFIG option.

There are a few hundred dma_addr_t's printed via either cast to unsigned
long long, unsigned long or no cast at all.

Add %pad to be able to emit them without the cast.

Update Documentation/printk-formats.txt too.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Shevchenko, Andriy" <andriy.shevchenko@intel.com>
Cc: Rob Landley <rob@landley.net>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23 16:36:56 -08:00
Kees Cook 9196436ab2 vsprintf: ignore %n again
This ignores %n in printf again, as was originally documented.
Implementing %n poses a greater security risk than utility, so it should
stay ignored.  To help anyone attempting to use %n, a warning will be
emitted if it is encountered.

Based on an earlier patch by Joe Perches.

Because %n was designed to write to pointers on the stack, it has been
frequently used as an attack vector when bugs are found that leak
user-controlled strings into functions that ultimately process format
strings.  While this class of bug can still be turned into an
information leak, removing %n eliminates the common method of elevating
such a bug into an arbitrary kernel memory writing primitive,
significantly reducing the danger of this class of bug.

For seq_file users that need to know the length of a written string for
padding, please see seq_setwidth() and seq_pad() instead.

Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Joe Perches <joe@perches.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 09:32:20 +09:00
Olof Johansson c0d92a57a8 lib/vsprintf.c: document formats for dentry and struct file
Looks like these were added to Documentation/printk-formats.txt but
not the in-file table.

Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:22 +09:00
Ryan Mallon 312b4e2269 vsprintf: check real user/group id for %pK
Some setuid binaries will allow reading of files which have read
permission by the real user id.  This is problematic with files which
use %pK because the file access permission is checked at open() time,
but the kptr_restrict setting is checked at read() time.  If a setuid
binary opens a %pK file as an unprivileged user, and then elevates
permissions before reading the file, then kernel pointer values may be
leaked.

This happens for example with the setuid pppd application on Ubuntu 12.04:

  $ head -1 /proc/kallsyms
  00000000 T startup_32

  $ pppd file /proc/kallsyms
  pppd: In file /proc/kallsyms: unrecognized option 'c1000000'

This will only leak the pointer value from the first line, but other
setuid binaries may leak more information.

Fix this by adding a check that in addition to the current process having
CAP_SYSLOG, that effective user and group ids are equal to the real ids.
If a setuid binary reads the contents of a file which uses %pK then the
pointer values will be printed as NULL if the real user is unprivileged.

Update the sysctl documentation to reflect the changes, and also correct
the documentation to state the kptr_restrict=0 is the default.

This is a only temporary solution to the issue.  The correct solution is
to do the permission check at open() time on files, and to replace %pK
with a function which checks the open() time permission.  %pK uses in
printk should be removed since no sane permission check can be done, and
instead protected by using dmesg_restrict.

Signed-off-by: Ryan Mallon <rmallon@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Joe Perches <joe@perches.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13 12:09:14 +09:00
Al Viro 4b6ccca701 add formats for dentry/file pathnames
New formats: %p[dD][234]?.  The next pointer is interpreted as struct dentry *
or struct file * resp. ('d' => dentry, 'D' => file) and the last component(s)
of pathname are printed (%pd => just the last one, %pd2 => the last two, etc.)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-04 00:13:11 -04:00
Linus Torvalds 496322bc91 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "This is a re-do of the net-next pull request for the current merge
  window.  The only difference from the one I made the other day is that
  this has Eliezer's interface renames and the timeout handling changes
  made based upon your feedback, as well as a few bug fixes that have
  trickeled in.

  Highlights:

   1) Low latency device polling, eliminating the cost of interrupt
      handling and context switches.  Allows direct polling of a network
      device from socket operations, such as recvmsg() and poll().

      Currently ixgbe, mlx4, and bnx2x support this feature.

      Full high level description, performance numbers, and design in
      commit 0a4db187a9 ("Merge branch 'll_poll'")

      From Eliezer Tamir.

   2) With the routing cache removed, ip_check_mc_rcu() gets exercised
      more than ever before in the case where we have lots of multicast
      addresses.  Use a hash table instead of a simple linked list, from
      Eric Dumazet.

   3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from
      Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski,
      Marek Puzyniak, Michal Kazior, and Sujith Manoharan.

   4) Support reporting the TUN device persist flag to userspace, from
      Pavel Emelyanov.

   5) Allow controlling network device VF link state using netlink, from
      Rony Efraim.

   6) Support GRE tunneling in openvswitch, from Pravin B Shelar.

   7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from
      Daniel Borkmann and Eric Dumazet.

   8) Allow controlling of TCP quickack behavior on a per-route basis,
      from Cong Wang.

   9) Several bug fixes and improvements to vxlan from Stephen
      Hemminger, Pravin B Shelar, and Mike Rapoport.  In particular,
      support receiving on multiple UDP ports.

  10) Major cleanups, particular in the area of debugging and cookie
      lifetime handline, to the SCTP protocol code.  From Daniel
      Borkmann.

  11) Allow packets to cross network namespaces when traversing tunnel
      devices.  From Nicolas Dichtel.

  12) Allow monitoring netlink traffic via AF_PACKET sockets, in a
      manner akin to how we monitor real network traffic via ptype_all.
      From Daniel Borkmann.

  13) Several bug fixes and improvements for the new alx device driver,
      from Johannes Berg.

  14) Fix scalability issues in the netem packet scheduler's time queue,
      by using an rbtree.  From Eric Dumazet.

  15) Several bug fixes in TCP loss recovery handling, from Yuchung
      Cheng.

  16) Add support for GSO segmentation of MPLS packets, from Simon
      Horman.

  17) Make network notifiers have a real data type for the opaque
      pointer that's passed into them.  Use this to properly handle
      network device flag changes in arp_netdev_event().  From Jiri
      Pirko and Timo Teräs.

  18) Convert several drivers over to module_pci_driver(), from Peter
      Huewe.

  19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a
      O(1) calculation instead.  From Eric Dumazet.

  20) Support setting of explicit tunnel peer addresses in ipv6, just
      like ipv4.  From Nicolas Dichtel.

  21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet.

  22) Prevent a single high rate flow from overruning an individual cpu
      during RX packet processing via selective flow shedding.  From
      Willem de Bruijn.

  23) Don't use spinlocks in TCP md5 signing fast paths, from Eric
      Dumazet.

  24) Don't just drop GSO packets which are above the TBF scheduler's
      burst limit, chop them up so they are in-bounds instead.  Also
      from Eric Dumazet.

  25) VLAN offloads are missed when configured on top of a bridge, fix
      from Vlad Yasevich.

  26) Support IPV6 in ping sockets.  From Lorenzo Colitti.

  27) Receive flow steering targets should be updated at poll() time
      too, from David Majnemer.

  28) Fix several corner case regressions in PMTU/redirect handling due
      to the routing cache removal, from Timo Teräs.

  29) We have to be mindful of ipv4 mapped ipv6 sockets in
      upd_v6_push_pending_frames().  From Hannes Frederic Sowa.

  30) Fix L2TP sequence number handling bugs, from James Chapman."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits)
  drivers/net: caif: fix wrong rtnl_is_locked() usage
  drivers/net: enic: release rtnl_lock on error-path
  vhost-net: fix use-after-free in vhost_net_flush
  net: mv643xx_eth: do not use port number as platform device id
  net: sctp: confirm route during forward progress
  virtio_net: fix race in RX VQ processing
  virtio: support unlocked queue poll
  net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit
  Documentation: Fix references to defunct linux-net@vger.kernel.org
  net/fs: change busy poll time accounting
  net: rename low latency sockets functions to busy poll
  bridge: fix some kernel warning in multicast timer
  sfc: Fix memory leak when discarding scattered packets
  sit: fix tunnel update via netlink
  dt:net:stmmac: Add dt specific phy reset callback support.
  dt:net:stmmac: Add support to dwmac version 3.610 and 3.710
  dt:net:stmmac: Allocate platform data only if its NULL.
  net:stmmac: fix memleak in the open method
  ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available
  net: ipv6: fix wrong ping_v6_sendmsg return value
  ...
2013-07-09 18:24:39 -07:00
Daniel Borkmann 1067964305 lib: vsprintf: add IPv4/v6 generic %p[Ii]S[pfs] format specifier
In order to avoid making code that deals with printing both, IPv4 and
IPv6 addresses, unnecessary complicated as for example ...

  if (sa.sa_family == AF_INET6)
    printk("... %pI6 ...", ..sin6_addr);
  else
    printk("... %pI4 ...", ..sin_addr.s_addr);

... it would be better to introduce a format specifier that can deal
with those kind of situations internally; just as we have a "struct
sockaddr" for generic mapping into "struct sockaddr_in" or "struct
sockaddr_in6" as e.g. done in "union sctp_addr". Then, we could
reduce the above statement into something like:

  printk("... %pIS ..", &sockaddr);

In case our pointer is NULL, pointer() then deals with that already at
an earlier point in time internally. While we're at it, support for both
%piS/%pIS, where 'S' stands for sockaddr, comes (almost) for free.

Additionally to that, postfix specifiers 'p', 'f' and 's' are supported
as suggested and initially implemented in 2009 by Joe Perches [1].
Handling of those additional specifiers orientate on the initial RFC that
was proposed. Also we support IPv6 compressed format specified by 'c' and
various other IPv4 extensions as stated in the documentation part.

Likely, there are many other areas than just SCTP in the kernel to make
use of this extension as well.

 [1] http://patchwork.ozlabs.org/patch/31480/

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
CC: Joe Perches <joe@perches.com>
CC: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-01 23:22:13 -07:00
Steven Rostedt 360603a1be sprintf: hex_string(): fix comment
hex_string() had a typo in a comment.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-05-29 01:14:46 +02:00
Joe Perches b0d33c2bd7 vsprintf: Add extension %pSR - print_symbol replacement
print_symbol takes a long and converts it to a function
name and offset.  %pS does something similar, but doesn't
translate the address via __builtin_extract_return_addr.
%pSR does the translation.

This will enable replacing multiple calls like
	printk(...);
	printk_symbol(addr);
	printk("\n");
with a single non-interleavable in dmesg
	printk("... %pSR\n", (void *)addr);

Update documentation too.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-30 22:31:16 +02:00
Stepan Moskovchenko 7d7992108d lib/vsprintf.c: add %pa format specifier for phys_addr_t types
Add the %pa format specifier for printing a phys_addr_t type and its
derivative types (such as resource_size_t), since the physical address
size on some platforms can vary based on build options, regardless of
the native integer type.

Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Cc: Rob Landley <rob@landley.net>
Cc: George Spelvin <linux@horizon.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 17:22:20 -08:00
Eldad Zack 462e471107 simple_strto*: annotate function as obsolete
Update the documentation for simple_strto* to reflect that it has been
obsoleted and advise the usage of kstrto*.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Joe Perches <joe@perches.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17 17:15:22 -08:00
Jan Beulich 53809751ac sscanf: don't ignore field widths for numeric conversions
This is another step towards better standard conformance.  Rather than
adding a local buffer to store the specified portion of the string (with
the need to enforce an arbitrary maximum supported width to limit the
buffer size), do a maximum width conversion and then drop as much of it as
is necessary to meet the caller's request.

Also fail on negative field widths.

Uses the deprecated simple_strto*() functions because kstrtoXX() fail on
non-zero terminated strings.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17 17:15:18 -08:00
Jason Gunthorpe ef12496022 lib/vsprintf.c: fix handling of %zd when using ssize_t
Documentation/printk-formats.txt says to use %zd for a ssize_t argument
and some drivers do.  Unfortunately this prints a positive number for
negative values eg:

  tpm_tis 70030000.tpm_tis: tpm_transmit: tpm_send: error 4294967234

Add a case to va_args a ssize_t type if the interpretation should be
signed.

Tested on PPC32.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17 17:15:13 -08:00
Jan Beulich da99075c1d lib/vsprintf.c: improve standard conformance of sscanf()
Xen's pciback points out a couple of deficiencies with vsscanf()'s
standard conformance:

- Trailing character matching cannot be checked by the caller: With a
  format string of "(%x:%x.%x) %n" absence of the closing parenthesis
  cannot be checked, as input of "(00:00.0)" doesn't cause the %n to be
  evaluated (because of the code not skipping white space before the
  trailing %n).

- The parameter corresponding to a trailing %n could get filled even if
  there was a matching error: With a format string of "(%x:%x.%x)%n",
  input of "(00:00.0]" would still fill the respective variable pointed to
  (and hence again make the mismatch non-detectable by the caller).

This patch aims at fixing those, but leaves other non-conforming aspects
of it untouched, among them these possibly relevant ones:

- improper handling of the assignment suppression character '*' (blindly
  discarding all succeeding non-white space from the format and input
  strings),

- not honoring conversion specifiers for %n, - not recognizing the C99
  conversion specifier 't' (recognized by vsprintf()).

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:04:58 +09:00
Andy Shevchenko 7c59154e75 lib/vsprintf: update documentation to cover all of %p[Mm][FR]
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:04:50 +09:00
George Spelvin f40005165f lib: vsprintf: fix broken comments
Numbering the 8 potential digits 2 though 9 never did make a lot of sense.

Signed-off-by: George Spelvin <linux@horizon.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:04:49 +09:00
George Spelvin cb239d0a97 lib: vsprintf: optimize put_dec_trunc8()
If you're going to have a conditional branch after each 32x32->64-bit
multiply, might as well shrink the code and make it a loop.

This also avoids using the long multiply for small integers.

(This leaves the comments in a confusing state, but that's a separate
patch to make review easier.)

Signed-off-by: George Spelvin <linux@horizon.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Rabin Vincent <rabin@rab.in>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:04:49 +09:00