There are enough places where css's of a cgroup are iterated, which
currently uses for_each_root_subsys() + explicit cgroup_css(). This
patch implements for_each_css() and replaces the above combination
with it.
This patch doesn't introduce any behavior changes.
v2: Updated to apply cleanly on top of v2 of "cgroup: fix css leaks on
online_css() failure"
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Now that all opertations to create a css (cgroup_subsys_state) are
collected into a single loop in cgroup_create(), it's easy to factor
it out into its own function. Factor out css creation into
create_css(). This makes the code easier to follow and will enable
decoupling css creation from cgroup creation which is necessary for
the planned unified hierarchy.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Now that css operations in cgroup_create() are back-to-back, there
isn't much point in allocating css's in one loop and onlining them in
another. Merge the two loops so that a css is allocated and onlined
on each iteration.
css_ar[] is no longer necessary and replaced with a single pointer.
This also simplifies the error handling path.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
cgroup_create() currently does the followings.
1. alloc cgroup
2. alloc css's
3. create the directory and commit to cgroup creation
4. online css's
5. create cgroup and css files
The sequence performs allocations before other operations but it
doesn't buy anything because each of the above steps may fail and
should be unrollable. Reorganize the sequence such that cgroup
operations are done before css operations.
1. alloc cgroup
2. create the directory and files and commit to cgroup creation
3. alloc css's
4. create files for and online css's
This simplifies the code a bit and enables further simplification and
separating out css creation from cgroup creation which is necessary
for the planned unified hierarchy where css's will be created and
destroyed dynamically across the lifetime of a cgroup.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
We want to use for_each_subsys() in cgroupfs_root handling where only
cgroup_root_mutex is held. The only way cgroup_subsys[] can change is
through module load/unload, make cgroup_[un]load_subsys() grab
cgroup_root_mutex too and update the lockdep annotation in
for_each_subsys() to allow either cgroup_mutex or cgroup_root_mutex.
* Lockdep annotation is moved from inner 'if' condition to outer 'for'
init caluse. There's no reason to execute the assertion every loop.
* Loop index @i is renamed to @ssid. Indices iterating through subsys
will be [re]named to @ssid gradually.
v2: cgroup_assert_mutex_or_root_locked() caused build failure if
!CONFIG_LOCKEDP. Conditionalize its definition. The build failure
was reported by kbuild test bot.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: kbuild test robot <fengguang.wu@intel.com>
Currently, all css iterations and css_from_dir() require RCU read lock
whether the caller is holding cgroup_mutex or not, which is
unnecessarily restrictive. They are all safe to use under
cgroup_mutex without holding RCU read lock.
Factor out cgroup_assert_mutex_or_rcu_locked() from css_from_id() and
apply it to all css iteration functions and css_from_dir().
v2: cgroup_assert_mutex_or_rcu_locked() definition doesn't need to be
inside CONFIG_PROVE_RCU ifdef as rcu_lockdep_assert() is always
defined and conditionalized. Move it outside of the ifdef block.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Pulling in as patches depending on 266ccd505e ("cgroup: fix
cgroup_create() error handling path") are scheduled.
Signed-off-by: Tejun Heo <tj@kernel.org>
ae7f164a09 ("cgroup: move cgroup->subsys[] assignment to
online_css()") moved cgroup->subsys[] assignements later in
cgroup_create() but didn't update error handling path accordingly
leading to the following oops and leaking later css's after an
online_css() failure. The oops is from cgroup destruction path being
invoked on the partially constructed cgroup which is not ready to
handle empty slots in cgrp->subsys[] array.
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: [<ffffffff810eeaa8>] cgroup_destroy_locked+0x118/0x2f0
PGD a780a067 PUD aadbe067 PMD 0
Oops: 0000 [#1] SMP
Modules linked in:
CPU: 6 PID: 7360 Comm: mkdir Not tainted 3.13.0-rc2+ #69
Hardware name:
task: ffff8800b9dbec00 ti: ffff8800a781a000 task.ti: ffff8800a781a000
RIP: 0010:[<ffffffff810eeaa8>] [<ffffffff810eeaa8>] cgroup_destroy_locked+0x118/0x2f0
RSP: 0018:ffff8800a781bd98 EFLAGS: 00010282
RAX: ffff880586903878 RBX: ffff880586903800 RCX: ffff880586903820
RDX: ffff880586903860 RSI: ffff8800a781bdb0 RDI: ffff880586903820
RBP: ffff8800a781bde8 R08: ffff88060e0b8048 R09: ffffffff811d7bc1
R10: 000000000000008c R11: 0000000000000001 R12: ffff8800a72286c0
R13: 0000000000000000 R14: ffffffff81cf7a40 R15: 0000000000000001
FS: 00007f60ecda57a0(0000) GS:ffff8806272c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 00000000a7a03000 CR4: 00000000000007e0
Stack:
ffff880586903860 ffff880586903910 ffff8800a72286c0 ffff880586903820
ffffffff81cf7a40 ffff880586903800 ffff88060e0b8018 ffffffff81cf7a40
ffff8800b9dbec00 ffff8800b9dbf098 ffff8800a781bec8 ffffffff810ef5bf
Call Trace:
[<ffffffff810ef5bf>] cgroup_mkdir+0x55f/0x5f0
[<ffffffff811c90ae>] vfs_mkdir+0xee/0x140
[<ffffffff811cb07e>] SyS_mkdirat+0x6e/0xf0
[<ffffffff811c6a19>] SyS_mkdir+0x19/0x20
[<ffffffff8169e569>] system_call_fastpath+0x16/0x1b
This patch moves reference bumping inside online_css() loop, clears
css_ar[] as css's are brought online successfully, and updates
err_destroy path so that either a css is fully online and destroyed by
cgroup_destroy_locked() or the error path frees it. This creates a
duplicate css free logic in the error path but it will be cleaned up
soon.
v2: Li pointed out that cgroup_destroy_locked() would do NULL-deref if
invoked with a cgroup which doesn't have all css's populated.
Update cgroup_destroy_locked() so that it skips NULL css's.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Reported-by: Vladimir Davydov <vdavydov@parallels.com>
Cc: stable@vger.kernel.org # v3.12+
In preparation of conversion to kernfs, cgroup file handling is
updated so that it can be easily mapped to kernfs. With the previous
changes, the difference between pidlist and other files are very
small. Both are served by seq_file in a pretty standard way with the
only difference being !pidlist files use single_open().
This patch adds cftype->seq_start(), ->seq_next and ->seq_stop() and
implements the matching cgroup_seqfile_start/next/stop() which either
emulates single_open() behavior or invokes cftype->seq_*() operations
if specified. This allows using single seq_operations for both
pidlist and other files and makes cgroup_pidlist_operations and
cgorup_pidlist_open() no longer necessary. As cgroup_pidlist_open()
was the only user of cftype->open(), the method is dropped together.
This brings cftype file interface very close to kernfs interface and
mapping shouldn't be too difficult. Once converted to kernfs, most of
the plumbing code including cgroup_seqfile_*() will be removed as
kernfs provides those facilities.
This patch does not introduce any behavior changes.
v2: Refreshed on top of the updated "cgroup: introduce struct
cgroup_pidlist_open_file".
v3: Refreshed on top of the updated "cgroup: attach cgroup_open_file
to all cgroup files".
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
In preparation of conversion to kernfs, cgroup file handling is
updated so that it can be easily mapped to kernfs. This patch
replaces cftype->read_seq_string() with cftype->seq_show() which is
not limited to single_open() operation and will map directcly to
kernfs seq_file interface.
The conversions are mechanical. As ->seq_show() doesn't have @css and
@cft, the functions which make use of them are converted to use
seq_css() and seq_cft() respectively. In several occassions, e.f. if
it has seq_string in its name, the function name is updated to fit the
new method better.
This patch does not introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
In preparation of conversion to kernfs, cgroup file handling is
updated so that it can be easily mapped to kernfs. This patch
attaches cgroup_open_file, which used to be attached to pidlist files,
to all cgroup files, introduces seq_css/cft() accessors to determine
the cgroup_subsys_state and cftype associated with a given cgroup
seq_file, exports them as public interface.
This doesn't cause any behavior changes but unifies cgroup file
handling across different file types and will help converting them to
kernfs seq_show() interface.
v2: Li pointed out that the original patch was using
single_open_size() incorrectly assuming that the size param is
private data size. Fix it by allocating @of separately and
passing it to single_open() and explicitly freeing it in the
release path. This isn't the prettiest but this path is gonna be
restructured by the following patches pretty soon.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
In preparation of conversion to kernfs, cgroup file handling is
updated so that it can be easily mapped to kernfs. This patch renames
cgroup_pidlist_open_file to cgroup_open_file and updates it so that it
only contains a field to identify the specific file, ->cfe, and an
opaque ->priv pointer. When cgroup is converted to kernfs, this will
be replaced by kernfs_open_file which contains about the same
information.
As whether the file is "cgroup.procs" or "tasks" should now be
determined from cgroup_open_file->cfe, the cftype->private for the two
files now carry the file type and cgroup_pidlist_start() reads the
type through cfe->type->private. This makes the distinction between
cgroup_tasks_open() and cgroup_procs_open() unnecessary.
cgroup_pidlist_open() is now directly used as the open method.
This patch doesn't make any behavior changes.
v2: Refreshed on top of the updated "cgroup: introduce struct
cgroup_pidlist_open_file".
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
With the recent removal of cftype->read() and ->read_map(), only three
operations are remaining, ->read_u64(), ->read_s64() and
->read_seq_string(). Currently, the first two are handled directly
while the last is handled through seq_file.
It is trivial to serve the first two through the seq_file path too.
This patch restructures read path so that all operations are served
through cgroup_seqfile_show(). This makes all cgroup files seq_file -
single_open/release() are now used by default,
cgroup_seqfile_operations is dropped, and cgroup_file_operations uses
seq_read() for read.
This simplifies the code and makes the read path easy to convert to
use kernfs.
Note that, while cgroup_file_operations uses seq_read() for read, it
still uses generic_file_llseek() for seeking instead of seq_lseek().
This is different from cgroup_seqfile_operations but shouldn't break
anything and brings the seeking behavior aligned with kernfs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
cgroup_write_X64() and cgroup_write_string() both implement about the
same buffering logic. Unify the two into cgroup_file_write() which
always allocates dynamic buffer for simplicity and uses kstrto*()
instead of simple_strto*().
This patch doesn't make any visible behavior changes except for
possibly different error value from kstrsto*().
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
In preparation of conversion to kernfs, cgroup file handling is being
consolidated so that it can be easily mapped to the seq_file based
interface of kernfs.
After recent updates, ->read() and ->read_map() don't have any user
left and ->write() never had any user. Remove them.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
In preparation of conversion to kernfs, cgroup file handling is being
consolidated so that it can be easily mapped to the seq_file based
interface of kernfs.
All users of cftype->read() can be easily served, usually better, by
seq_file and other methods. Update hugetlb_cgroup_read() to return
u64 instead of printing itself and rename it to
hugetlb_cgroup_read_u64().
This patch doesn't make any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
In preparation of conversion to kernfs, cgroup file handling is being
consolidated so that it can be easily mapped to the seq_file based
interface of kernfs.
cftype->read_map() doesn't add any value and being replaced with
->read_seq_string(). Update read_priomap() to use ->read_seq_string()
instead.
This patch doesn't make any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: Li Zefan <lizefan@huawei.com>
In preparation of conversion to kernfs, cgroup file handling is being
consolidated so that it can be easily mapped to the seq_file based
interface of kernfs.
cftype->read_map() doesn't add any value and being replaced with
->read_seq_string(), and all users of cftype->read() can be easily
served, usually better, by seq_file and other methods.
Update mem_cgroup_read() to return u64 instead of printing itself and
rename it to mem_cgroup_read_u64(), and update
mem_cgroup_oom_control_read() to use ->read_seq_string() instead of
->read_map().
This patch doesn't make any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
In preparation of conversion to kernfs, cgroup file handling is being
consolidated so that it can be easily mapped to the seq_file based
interface of kernfs.
All users of cftype->read() can be easily served, usually better, by
seq_file and other methods. Rename cpuset_common_file_read() to
cpuset_common_read_seq_string() and convert it to use
read_seq_string() interface instead. This not only simplifies the
code but also makes it more versatile. Before, the file couldn't
output if the result is longer than PAGE_SIZE. After the conversion,
seq_file automatically grows the buffer until the output can fit.
This patch doesn't make any visible behavior changes except for being
able to handle output larger than PAGE_SIZE.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
In preparation of conversion to kernfs, cgroup file handling is being
consolidated so that it can be easily mapped to the seq_file based
interface of kernfs.
cftype->read_map() doesn't add any value and being replaced with
->read_seq_string(). Update cpu_stats_show() and cpuacct_stats_show()
accordingly.
This patch doesn't make any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
For some reason, tasks and cgroup.procs guarantee that the result is
sorted. This is the only reason this whole pidlist logic is necessary
instead of just iterating through sorted member tasks. We can't do
anything about the existing interface but at least ensure that such
expectation doesn't exist for the new interface so that pidlist logic
may be removed in the distant future.
This patch scrambles the sort order if sane_behavior so that the
output is usually not sorted in the new interface.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
After the recent changes, pidlist ref is held only between
cgroup_pidlist_start() and cgroup_pidlist_stop() during which
cgroup->pidlist_mutex is also held. IOW, the reference count is
redundant now. While in use, it's always one and pidlist_mutex is
held - holding the mutex has exactly the same protection.
This patch collapses destroy_dwork queueing into cgroup_pidlist_stop()
so that pidlist_mutex is not released inbetween and drops
pidlist->use_count.
This patch shouldn't introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Currently, pidlists are reference counted from file open and release
methods. This means that holding onto an open file may waste memory
and reads may return data which is very stale. Both aren't critical
because pidlists are keyed and shared per namespace and, well, the
user isn't supposed to have large delay between open and reads.
cgroup is planned to be converted to use kernfs and it'd be best if we
can stick to just the seq_file operations - start, next, stop and
show. This can be achieved by loading pidlist on demand from start
and release with time delay from stop, so that consecutive reads don't
end up reloading the pidlist on each iteration. This would remove the
need for hooking into open and release while also avoiding issues with
holding onto pidlist for too long.
The previous patches implemented delayed release and restructured
pidlist handling so that pidlists can be loaded and released from
seq_file start / stop. This patch actually moves pidlist load to
start and release to stop.
This means that pidlist is pinned only between start and stop and may
go away between two consecutive read calls if the two calls are apart
by more than CGROUP_PIDLIST_DESTROY_DELAY. cgroup_pidlist_start()
thus can't re-use the stored cgroup_pid_list_open_file->pidlist
directly. During start, it's only used as a hint indicating whether
this is the first start after open or not and pidlist is always looked
up or created.
pidlist_mutex locking and reference counting are moved out of
pidlist_array_load() so that pidlist_array_load() can perform lookup
and creation atomically. While this enlarges the area covered by
pidlist_mutex, given how the lock is used, it's highly unlikely to be
noticeable.
v2: Refreshed on top of the updated "cgroup: introduce struct
cgroup_pidlist_open_file".
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
cgroup_pidlist locking is needlessly complicated. It has outer
cgroup->pidlist_mutex to protect the list of pidlists associated with
a cgroup and then each pidlist has rwsem to synchronize updates and
reads. Given that the only read access is from seq_file operations
which are always invoked back-to-back, the rwsem is a giant overkill.
All it does is adding unnecessary complexity.
This patch removes cgroup_pidlist->rwsem and protects all accesses to
pidlists belonging to a cgroup with cgroup->pidlist_mutex.
pidlist->rwsem locking is removed if it's nested inside
cgroup->pidlist_mutex; otherwise, it's replaced with
cgroup->pidlist_mutex locking.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Rename cgroup_pidlist_find() to cgroup_pidlist_find_create() and
separate out finding proper to cgroup_pidlist_find(). Also, move
locking to the caller.
This patch is preparation for pidlist restructure and doesn't
introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
For pidlist files, seq_file->private pointed to the loaded
cgroup_pidlist; however, pidlist loading is planned to be moved to
cgroup_pidlist_start() for kernfs conversion and seq_file->private
needs to carry more information from open to allow that.
This patch introduces struct cgroup_pidlist_open_file which contains
type, cgrp and pidlist and updates pidlist seq_file->private to point
to it using seq_open_private() and seq_release_private(). Note that
this eventually will be replaced by kernfs_open_file.
While this patch makes more information available to seq_file
operations, they don't use it yet and this patch doesn't introduce any
behavior changes except for allocation of the extra private struct.
v2: use __seq_open_private() instead of seq_open_private() for brevity
as suggested by Li.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Currently, pidlists are reference counted from file open and release
methods. This means that holding onto an open file may waste memory
and reads may return data which is very stale. Both aren't critical
because pidlists are keyed and shared per namespace and, well, the
user isn't supposed to have large delay between open and reads.
cgroup is planned to be converted to use kernfs and it'd be best if we
can stick to just the seq_file operations - start, next, stop and
show. This can be achieved by loading pidlist on demand from start
and release with time delay from stop, so that consecutive reads don't
end up reloading the pidlist on each iteration. This would remove the
need for hooking into open and release while also avoiding issues with
holding onto pidlist for too long.
This patch implements delayed release of pidlist. As pidlists could
be lingering on cgroup removal waiting for the timer to expire, cgroup
free path needs to queue the destruction work item immediately and
flush. As those work items are self-destroying, each work item can't
be flushed directly. A new workqueue - cgroup_pidlist_destroy_wq - is
added to serve as flush domain.
Note that this patch just adds delayed release on top of the current
implementation and doesn't change where pidlist is loaded and
released. Following patches will make those changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Now that pidlist files don't use cftype->release(), it doesn't have
any user left. Remove it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Currently, cgroup_pidlist_open() skips seq_open() and pidlist loading
if the file is opened write-only, which is a sensible optimization as
pidlist loading can be costly and there often are occasions where
tasks or cgroup.procs is opened write-only. However, pidlist init and
release are planned to be moved to cgroup_pidlist_start/stop()
respectively which would make this optimization unnecessary.
This patch removes the optimization and always fully initializes
pidlist files regardless of open mode. This will help moving pidlist
handling to start/stop by unifying rw paths and removes the need for
specifying cftype->release() in addition to .release in
cgroup_pidlist_operations as file->f_op is now always overridden. As
pidlist files were the only user of cftype->release(), the next patch
will remove the method.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Pull to receive e605b36575 ("cgroup: fix cgroup_subsys_state leak
for seq_files") as for-3.14 is scheduled to have a lot of changes
which depend on it.
Signed-off-by: Tejun Heo <tj@kernel.org>
If a cgroup file implements either read_map() or read_seq_string(),
such file is served using seq_file by overriding file->f_op to
cgroup_seqfile_operations, which also overrides the release method to
single_release() from cgroup_file_release().
Because cgroup_file_open() didn't use to acquire any resources, this
used to be fine, but since f7d58818ba ("cgroup: pin
cgroup_subsys_state when opening a cgroupfs file"), cgroup_file_open()
pins the css (cgroup_subsys_state) which is put by
cgroup_file_release(). The patch forgot to update the release path
for seq_files and each open/release cycle leaks a css reference.
Fix it by updating cgroup_file_release() to also handle seq_files and
using it for seq_file release path too.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v3.12
Juri hit the below lockdep report:
[ 4.303391] ======================================================
[ 4.303392] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ]
[ 4.303394] 3.12.0-dl-peterz+ #144 Not tainted
[ 4.303395] ------------------------------------------------------
[ 4.303397] kworker/u4:3/689 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
[ 4.303399] (&p->mems_allowed_seq){+.+...}, at: [<ffffffff8114e63c>] new_slab+0x6c/0x290
[ 4.303417]
[ 4.303417] and this task is already holding:
[ 4.303418] (&(&q->__queue_lock)->rlock){..-...}, at: [<ffffffff812d2dfb>] blk_execute_rq_nowait+0x5b/0x100
[ 4.303431] which would create a new lock dependency:
[ 4.303432] (&(&q->__queue_lock)->rlock){..-...} -> (&p->mems_allowed_seq){+.+...}
[ 4.303436]
[ 4.303898] the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock:
[ 4.303918] -> (&p->mems_allowed_seq){+.+...} ops: 2762 {
[ 4.303922] HARDIRQ-ON-W at:
[ 4.303923] [<ffffffff8108ab9a>] __lock_acquire+0x65a/0x1ff0
[ 4.303926] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140
[ 4.303929] [<ffffffff81063dd6>] kthreadd+0x86/0x180
[ 4.303931] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0
[ 4.303933] SOFTIRQ-ON-W at:
[ 4.303933] [<ffffffff8108abcc>] __lock_acquire+0x68c/0x1ff0
[ 4.303935] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140
[ 4.303940] [<ffffffff81063dd6>] kthreadd+0x86/0x180
[ 4.303955] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0
[ 4.303959] INITIAL USE at:
[ 4.303960] [<ffffffff8108a884>] __lock_acquire+0x344/0x1ff0
[ 4.303963] [<ffffffff8108cbe3>] lock_acquire+0x93/0x140
[ 4.303966] [<ffffffff81063dd6>] kthreadd+0x86/0x180
[ 4.303969] [<ffffffff816ded6c>] ret_from_fork+0x7c/0xb0
[ 4.303972] }
Which reports that we take mems_allowed_seq with interrupts enabled. A
little digging found that this can only be from
cpuset_change_task_nodemask().
This is an actual deadlock because an interrupt doing an allocation will
hit get_mems_allowed()->...->__read_seqcount_begin(), which will spin
forever waiting for the write side to complete.
Cc: John Stultz <john.stultz@linaro.org>
Cc: Mel Gorman <mgorman@suse.de>
Reported-by: Juri Lelli <juri.lelli@gmail.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Juri Lelli <juri.lelli@gmail.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Merge v3.12 based patch series to move cgroup_event implementation to
memcg into for-3.14. The following two commits cause a conflict in
kernel/cgroup.c
2ff2a7d03b ("cgroup: kill css_id")
79bd9814e5 ("cgroup, memcg: move cgroup_event implementation to memcg")
Each patch removes a struct definition from kernel/cgroup.c. As the
two are adjacent, they cause a context conflict. Easily resolved by
removing both structs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Now that cgroup_event is made memcg specific, the temporarily exported
functions are no longer necessary. Unexport cgroup_css() and remove
__file_cft() which doesn't have any user left.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
cgroup_event is only available in memcg now. Let's brand it that way.
While at it, add a comment encouraging deprecation of the feature and
remove the respective section from cgroup documentation.
This patch is cosmetic.
v3: Typo update as per Li Zefan.
v2: Index in cgroups.txt updated accordingly as suggested by Li Zefan.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
cgroup_event is now memcg specific. Replace cgroup_event->css with
->memcg and convert [un]register_event() callbacks to take mem_cgroup
pointer instead of cgroup_subsys_state one. This simplifies the code
slightly and makes css_to_vmpressure() unnecessary which is removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
The only use of cgroup_event->cft is distinguishing "usage_in_bytes"
and "memsw.usgae_in_bytes" for mem_cgroup_usage_[un]register_event(),
which can be done by adding an explicit argument to the function and
implementing two wrappers so that the two cases can be distinguished
from the function alone.
Remove cgroup_event->cft and the related code including
[un]register_events() methods.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
cgroup_event is being moved from cgroup core to memcg and the
implementation is already moved by the previous patch. This patch
moves the data fields and callbacks.
* cgroup->event_list[_lock] are moved to mem_cgroup.
* cftype->[un]register_event() are moved to cgroup_event. This makes
it impossible for individual cftype definitions to specify their
event callbacks. This is worked around by simply hard-coding
filename to event callback mapping in cgroup_write_event_control().
This is awkward and inflexible, which is actually desirable given
that we don't want to grow more usages of this feature.
* eventfd_ctx declaration is removed from cgroup.h, which makes
vmpressure.h miss eventfd_ctx declaration. Include eventfd.h from
vmpressure.h.
v2: Use file name from dentry instead of cftype. This will allow
removing all cftype handling in the function.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
@css for cgroup_write_event_control() is now always for memcg and the
target file should be a memcg file too. Drop code which assumes @css
is dummy_css and the target file may belong to different subsystems.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
cgroup_event is way over-designed and tries to build a generic
flexible event mechanism into cgroup - fully customizable event
specification for each user of the interface. This is utterly
unnecessary and overboard especially in the light of the planned
unified hierarchy as there's gonna be single agent. Simply generating
events at fixed points, or if that's too restrictive, configureable
cadence or single set of configureable points should be enough.
Thankfully, memcg is the only user and gets to keep it. Replacing it
with something simpler on sane_behavior is strongly recommended.
This patch moves cgroup_event and "cgroup.event_control"
implementation to mm/memcontrol.c. Clearing of events on cgroup
destruction is moved from cgroup_destroy_locked() to
mem_cgroup_css_offline(), which shouldn't make any noticeable
difference.
cgroup_css() and __file_cft() are exported to enable the move;
however, this will soon be reverted once the event code is updated to
be memcg specific.
Note that "cgroup.event_control" will now exist only on the hierarchy
with memcg attached to it. While this change is visible to userland,
it is unlikely to be noticeable as the file has never been meaningful
outside memcg.
Aside from the above change, this is pure code relocation.
v2: Per Li Zefan's comments, init/Kconfig updated accordingly and
poll.h inclusion moved from cgroup.c to memcontrol.c.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Since be44562613 ("cgroup: remove synchronize_rcu() from
cgroup_diput()"), cgroup destruction path makes use of workqueue. css
freeing is performed from a work item from that point on and a later
commit, ea15f8ccdb ("cgroup: split cgroup destruction into two
steps"), moves css offlining to workqueue too.
As cgroup destruction isn't depended upon for memory reclaim, the
destruction work items were put on the system_wq; unfortunately, some
controller may block in the destruction path for considerable duration
while holding cgroup_mutex. As large part of destruction path is
synchronized through cgroup_mutex, when combined with high rate of
cgroup removals, this has potential to fill up system_wq's max_active
of 256.
Also, it turns out that memcg's css destruction path ends up queueing
and waiting for work items on system_wq through work_on_cpu(). If
such operation happens while system_wq is fully occupied by cgroup
destruction work items, work_on_cpu() can't make forward progress
because system_wq is full and other destruction work items on
system_wq can't make forward progress because the work item waiting
for work_on_cpu() is holding cgroup_mutex, leading to deadlock.
This can be fixed by queueing destruction work items on a separate
workqueue. This patch creates a dedicated workqueue -
cgroup_destroy_wq - for this purpose. As these work items shouldn't
have inter-dependencies and mostly serialized by cgroup_mutex anyway,
giving high concurrency level doesn't buy anything and the workqueue's
@max_active is set to 1 so that destruction work items are executed
one by one on each CPU.
Hugh Dickins: Because cgroup_init() is run before init_workqueues(),
cgroup_destroy_wq can't be allocated from cgroup_init(). Do it from a
separate core_initcall(). In the future, we probably want to reorder
so that workqueue init happens before cgroup_init().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Link: http://lkml.kernel.org/r/20131111220626.GA7509@sbohrermbp13-local.rgmadvisors.com
Link: http://lkml.kernel.org/g/alpine.LNX.2.00.1310301606080.2333@eggly.anvils
Cc: stable@vger.kernel.org # v3.9+
A collection of small fixes in HD-audio quirks and runtime PM, ASoC
rcar, abs8500 and other codecs. Most of commits are for stable
kernels, too.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=zoMb
-----END PGP SIGNATURE-----
Merge tag 'sound-fix2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull second set of sound fixes from Takashi Iwai:
"A collection of small fixes in HD-audio quirks and runtime PM, ASoC
rcar, abs8500 and other codecs. Most of commits are for stable
kernels, too"
* tag 'sound-fix2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Set current_headset_type to ALC_HEADSET_TYPE_ENUM (janitorial)
ALSA: hda - Provide missing pin configs for VAIO with ALC260
ALSA: hda - Add headset quirk for Dell Inspiron 3135
ALSA: hda - Fix the headphone jack detection on Sony VAIO TX
ALSA: hda - Fix missing bass speaker on ASUS N550
ALSA: hda - Fix unbalanced runtime PM notification at resume
ASoC: arizona: Set FLL to free-run before disabling
ALSA: hda - A casual Dell Headset quirk
ASoC: rcar: fixup dma_async_issue_pending() timing
ASoC: rcar: off by one in rsnd_scu_set_route()
ASoC: wm5110: Add post SYSCLK register patch for rev D chip
ASoC: ab8500: Revert to using custom I/O functions
ALSA: hda - Also enable mute/micmute LED control for "Lenovo dock" fixup
ALSA: firewire-lib: include sound/asound.h to refer to snd_pcm_format_t
ALSA: hda - Select FW_LOADER from CONFIG_SND_HDA_CODEC_CA0132_DSP
ALSA: hda - Enable mute/mic-mute LEDs for more Thinkpads with Realtek codec
ASoC: rcar: fixup mod access before checking
Pull DRM fixes from Dave Airlie:
"I was going to leave this until post -rc1 but sysfs fixes broke
hotplug in userspace, so I had to fix it harder, otherwise a set of
pulls from intel, radeon and vmware,
The vmware/ttm changes are bit larger but since its early and they are
unlikely to break anything else I put them in, it lets vmware work
with dri3"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (36 commits)
drm/sysfs: fix hotplug regression since lifetime changes
drm/exynos: g2d: fix memory leak to userptr
drm/i915: Fix gen3 self-refresh watermarks
drm/ttm: Remove set_need_resched from the ttm fault handler
drm/ttm: Don't move non-existing data
drm/radeon: hook up backlight functions for CI and KV family.
drm/i915: Replicate BIOS eDP bpp clamping hack for hsw
drm/i915: Do not enable package C8 on unsupported hardware
drm/i915: Hold pc8 lock around toggling pc8.gpu_idle
drm/i915: encoder->get_config is no longer optional
drm/i915/tv: add ->get_config callback
drm/radeon/cik: Add macrotile mode array query
drm/radeon/cik: Return backend map information to userspace
drm/vmwgfx: Make vmwgfx dma buffers prime aware
drm/vmwgfx: Make surfaces prime-aware
drm/vmwgfx: Hook up the prime ioctls
drm/ttm: Add a minimal prime implementation for ttm base objects
drm/vmwgfx: Fix false lockdep warning
drm/ttm: Allow execbuf util reserves without ticket
drm/i915: restore the early forcewake cleanup
...
Pull SCSI target updates from Nicholas Bellinger:
"Things have been quiet this round with mostly bugfixes, percpu
conversions, and other minor iscsi-target conformance testing changes.
The highlights include:
- Add demo_mode_discovery attribute for iscsi-target (Thomas)
- Convert tcm_fc(FCoE) to use percpu-ida pre-allocation
- Add send completion interrupt coalescing for ib_isert
- Convert target-core to use percpu-refcounting for se_lun
- Fix mutex_trylock usage bug in iscsit_increment_maxcmdsn
- tcm_loop updates (Hannes)
- target-core ALUA cleanups + prep for v3.14 SCSI Referrals support (Hannes)
v3.14 is currently shaping to be a busy development cycle in target
land, with initial support for T10 Referrals and T10 DIF currently on
the roadmap"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (40 commits)
iscsi-target: chap auth shouldn't match username with trailing garbage
iscsi-target: fix extract_param to handle buffer length corner case
iscsi-target: Expose default_erl as TPG attribute
target_core_configfs: split up ALUA supported states
target_core_alua: Make supported states configurable
target_core_alua: Store supported ALUA states
target_core_alua: Rename ALUA_ACCESS_STATE_OPTIMIZED
target_core_alua: spellcheck
target core: rename (ex,im)plict -> (ex,im)plicit
percpu-refcount: Add percpu-refcount.o to obj-y
iscsi-target: Do not reject non-immediate CmdSNs exceeding MaxCmdSN
iscsi-target: Convert iscsi_session statistics to atomic_long_t
target: Convert se_device statistics to atomic_long_t
target: Fix delayed Task Aborted Status (TAS) handling bug
iscsi-target: Reject unsupported multi PDU text command sequence
ib_isert: Avoid duplicate iscsit_increment_maxcmdsn call
iscsi-target: Fix mutex_trylock usage in iscsit_increment_maxcmdsn
target: Core does not need blkdev.h
target: Pass through I/O topology for block backstores
iser-target: Avoid using FRMR for single dma entry requests
...
acpi_power_meter: Fix return value check from call to acpi_bus_get_device
nct6775: Fix/improve NCT6791 support
lm75: Add support for GMT G751
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=ObF6
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- acpi_power_meter: Fix return value check from call to
acpi_bus_get_device
- nct6775: Fix/improve NCT6791 support
- lm75: Add support for GMT G751
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (acpi_power_meter) Fix acpi_bus_get_device() return value check
hwmon: (nct6775) NCT6791 supports weight control only for CPUFAN
hwmon: (nct6775) Monitor additional temperature registers
hwmon: (lm75) Add support for GMT G751 chip
Pull networking fixes from David Miller:
1) Fix memory leaks and other issues in mwifiex driver, from Amitkumar
Karwar.
2) skb_segment() can choke on packets using frag lists, fix from
Herbert Xu with help from Eric Dumazet and others.
3) IPv4 output cached route instantiation properly handles races
involving two threads trying to install the same route, but we
forgot to propagate this logic to input routes as well. Fix from
Alexei Starovoitov.
4) Put protections in place to make sure that recvmsg() paths never
accidently copy uninitialized memory back into userspace and also
make sure that we never try to use more that sockaddr_storage for
building the on-kernel-stack copy of a sockaddr. Fixes from Hannes
Frederic Sowa.
5) R8152 driver transmit flow bug fixes from Hayes Wang.
6) Fix some minor fallouts from genetlink changes, from Johannes Berg
and Michael Opdenacker.
7) AF_PACKET sendmsg path can race with netdevice unregister notifier,
fix by using RCU to make sure the network device doesn't go away
from under us. Fix from Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
gso: handle new frag_list of frags GRO packets
genetlink: fix genl_set_err() group ID
genetlink: fix genlmsg_multicast() bug
packet: fix use after free race in send path when dev is released
xen-netback: stop the VIF thread before unbinding IRQs
wimax: remove dead code
net/phy: Add the autocross feature for forced links on VSC82x4
net/phy: Add VSC8662 support
net/phy: Add VSC8574 support
net/phy: Add VSC8234 support
net: add BUG_ON if kernel advertises msg_namelen > sizeof(struct sockaddr_storage)
net: rework recvmsg handler msg_name and msg_namelen logic
bridge: flush br's address entry in fdb when remove the
net: core: Always propagate flag changes to interfaces
ipv4: fix race in concurrent ip_route_input_slow()
r8152: fix incorrect type in assignment
r8152: support stopping/waking tx queue
r8152: modify the tx flow
r8152: fix tx/rx memory overflow
netfilter: ebt_ip6: fix source and destination matching
...
Pull ARM fixes from Russell King:
"Some small fixes for this merge window, most of them quite self
explanatory - the biggest thing here is a fix for the ARMv7 LPAE
suspend/resume support"
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7894/1: kconfig: select GENERIC_CLOCKEVENTS if HAVE_ARM_ARCH_TIMER
ARM: 7893/1: bitops: only emit .arch_extension mp if CONFIG_SMP
ARM: 7892/1: Fix warning for V7M builds
ARM: 7888/1: seccomp: not compatible with ARM OABI
ARM: 7886/1: make OABI default to off
ARM: 7885/1: Save/Restore 64-bit TTBR registers on LPAE suspend/resume
ARM: 7884/1: mm: Fix ECC mem policy printk
ARM: 7883/1: fix mov to mvn conversion in case of 64 bit phys_addr_t and BE
ARM: 7882/1: mm: fix __phys_to_virt to work with 64 bit phys_addr_t in BE case
ARM: 7881/1: __fixup_smp read of SCU config should do byteswap in BE case
ARM: Fix nommu.c build warning
Tejun Heo