mbigen_write_msg clears eventid bits of a mbigen register
when free a interrupt, because msi_domain_deactivate memset
struct msg to zero. Then multiple mbigen pins with zero eventid
will report the same interrupt number.
The eventid clear call trace:
free_irq
__free_irq
irq_shutdown
irq_domain_deactivate_irq
__irq_domain_deactivate_irq
__irq_domain_deactivate_irq
msi_domain_deactivate
platform_msi_write_msg
mbigen_write_msg
Signed-off-by: Jianguo Chen <chenjianguo3@huawei.com>
[maz: massaged subject]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The rising configuration status register (rtsr) is not banked.
As it is shared with the co-processor, it should not be written at probe
time, else the co-processor configuration will be lost.
Fixes: f9fc174550 ("irqchip/stm32: Add host and driver data structures")
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Falling and rising configuration and status registers are not banked.
As they are shared with M4 co-processor, they should not be cleared
at probe time, else M4 co-processor configuration will be lost.
Fixes: f9fc174550 ("irqchip/stm32: Add host and driver data structures")
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Fix sparse warning:
drivers/irqchip/irq-mmp.c:182:29: warning:
symbol 'mmp_irq_domain_ops' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Fix sparse warnings:
drivers/irqchip/irq-brcmstb-l2.c:278:12: warning:
symbol 'brcmstb_l2_edge_intc_of_init' was not declared. Should it be static?
drivers/irqchip/irq-brcmstb-l2.c:285:12: warning:
symbol 'brcmstb_l2_lvl_intc_of_init' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Objtool uses over 512k of stack, thanks to the hash table embedded in
the objtool_file struct. This causes an unnecessarily large stack
allocation and breaks users with low stack limits.
Move the struct off the stack.
Fixes: 042ba73fe7 ("objtool: Add several performance improvements")
Reported-by: Vassili Karpov <moosotc@gmail.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/df92dcbc4b84b02ffa252f46876df125fb56e2d7.1552954176.git.jpoimboe@redhat.com
The recent change to prevent use after free and a memory leak introduced an
unconditional call to wq_unregister_lockdep() in the error handling
path. If the lockdep key had not been registered yet, then the lockdep core
emits a warning.
Only call wq_unregister_lockdep() if wq_register_lockdep() has been
called first.
Fixes: 009bb421b6 ("workqueue, lockdep: Fix an alloc_workqueue() error path")
Reported-by: syzbot+be0c198232f86389c3dd@syzkaller.appspotmail.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Link: https://lkml.kernel.org/r/20190311230255.176081-1-bvanassche@acm.org
R-Car Gen2 has two different SDHI incarnations in the same chip. The
older one does not support the recently introduced 32 bit register
access to the block count register. Make sure we use this feature only
after the first known version.
Thanks to the Renesas Testing team for this bug report!
Fixes: 5603731a15 ("mmc: tmio: fix access width of Block Count Register")
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Tested-by: Phong Hoang <phong.hoang.wz@renesas.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Setting max_blk_count to 1 here was causing the mmc block layer
to always use the MMC_READ_SINGLE_BLOCK command here, which the
driver does not DMA-accelerate.
Drop the max_blk_ settings here. The mmc host defaults suffice,
along with the max_segs and max_seg_size settings, which I have
now documented in more detail.
Now each MMC command reads 4 512-byte blocks, using DMA instead of
PIO. On my SD card, this increases read performance (measured with dd)
from 167kb/sec to 4.6mb/sec.
Link: http://lkml.kernel.org/r/CAD8Lp47L5T3jnAjBiPs1cQ+yFA3L6LJtgFvMETnBrY63-Zdi2g@mail.gmail.com
Signed-off-by: Daniel Drake <drake@endlessm.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Fixes: c5413ad815 ("mmc: add new Alcor Micro Cardreader SD/MMC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
After commit 6d5cd068ee ("mmc: sdhci: use WP GPIO in
sdhci_check_ro()") and commit 39ee32ce48 ("mmc: sdhci-omap: drop
->get_ro() implementation"), sdhci-omap relied on SDHCI_PRESENT_STATE
to check if the card is read-only, if wp-gpios is not populated
in device tree. However SDHCI_PRESENT_STATE in sdhci-omap does not have
correct read-only state.
sdhci-omap can be used by platforms with both micro SD slot and standard
SD slot with physical write protect pin (using GPIO). Set caps2 to
MMC_CAP2_NO_WRITE_PROTECT based on if wp-gpios property is populated or
not.
This fix is required since existing device-tree node doesn't have
"disable-wp" property and to preserve old-dt compatibility.
Fixes: 6d5cd068ee ("mmc: sdhci: use WP GPIO in sdhci_check_ro()")
Fixes: 39ee32ce48 ("mmc: sdhci-omap: drop ->get_ro() implementation")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When I updated the spectre_v2 reporting to handle software count cache
flush I got the logic wrong when there's no software count cache
enabled at all.
The result is that on systems with the software count cache flush
disabled we print:
Mitigation: Indirect branch cache disabled, Software count cache flush
Which correctly indicates that the count cache is disabled, but
incorrectly says the software count cache flush is enabled.
The root of the problem is that we are trying to handle all
combinations of options. But we know now that we only expect to see
the software count cache flush enabled if the other options are false.
So split the two cases, which simplifies the logic and fixes the bug.
We were also missing a space before "(hardware accelerated)".
The result is we see one of:
Mitigation: Indirect branch serialisation (kernel only)
Mitigation: Indirect branch cache disabled
Mitigation: Software count cache flush
Mitigation: Software count cache flush (hardware accelerated)
Fixes: ee13cb249f ("powerpc/64s: Add support for software count cache flush")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Michael Neuling <mikey@neuling.org>
Reviewed-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some Acer AIO desktops like Veriton Z6860G, Z4860G and Z4660G cannot
record sound from headset MIC. This patch adds the
ALC286_FIXUP_ACER_AIO_HEADSET_MIC quirk to fix this issue.
Fixes: 9f8aefed96 ("ALSA: hda/realtek: Fix mic issue on Acer AIO Veriton Z4660G")
Fixes: b72f936f6b ("ALSA: hda/realtek: Fix mic issue on Acer AIO Veriton Z4860G/Z6860G")
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Reviewed-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
MIXER on Exynos5 SoCs uses different synchronisation method than Exynos4
to update internal state (shadow registers).
Apparently the driver implements it incorrectly. The rule should be
as follows:
- do not request updating registers until previous request was finished,
ie. MXR_CFG_LAYER_UPDATE_COUNT must be 0.
- before setting registers synchronisation on VSYNC should be turned off,
ie. MXR_STATUS_SYNC_ENABLE should be reset,
- after finishing MXR_STATUS_SYNC_ENABLE should be set again.
The patch hopefully implements it correctly.
Below sample kernel log from page fault caused by the bug:
[ 25.670038] exynos-sysmmu 14650000.sysmmu: 14450000.mixer: PAGE FAULT occurred at 0x2247b800
[ 25.677888] ------------[ cut here ]------------
[ 25.682164] kernel BUG at ../drivers/iommu/exynos-iommu.c:450!
[ 25.687971] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
[ 25.693778] Modules linked in:
[ 25.696816] CPU: 5 PID: 1553 Comm: fb-release_test Not tainted 5.0.0-rc7-01157-g5f86b1566bdd #136
[ 25.705646] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[ 25.711710] PC is at exynos_sysmmu_irq+0x1c0/0x264
[ 25.716470] LR is at lock_is_held_type+0x44/0x64
v2: added missing MXR_CFG_LAYER_UPDATE bit setting in mixer_enable_sync
Reported-by: Marian Mihailescu <mihailescu2m@gmail.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The event pool used for queueing commands is destroyed fairly early in the
ibmvscsi_remove() code path. Since, this happens prior to the call so
scsi_remove_host() it is possible for further calls to queuecommand to be
processed which manifest as a panic due to a NULL pointer dereference as
seen here:
PANIC: "Unable to handle kernel paging request for data at address
0x00000000"
Context process backtrace:
DSISR: 0000000042000000 ????Syscall Result: 0000000000000000
4 [c000000002cb3820] memcpy_power7 at c000000000064204
[Link Register] [c000000002cb3820] ibmvscsi_send_srp_event at d000000003ed14a4
5 [c000000002cb3920] ibmvscsi_send_srp_event at d000000003ed14a4 [ibmvscsi] ?(unreliable)
6 [c000000002cb39c0] ibmvscsi_queuecommand at d000000003ed2388 [ibmvscsi]
7 [c000000002cb3a70] scsi_dispatch_cmd at d00000000395c2d8 [scsi_mod]
8 [c000000002cb3af0] scsi_request_fn at d00000000395ef88 [scsi_mod]
9 [c000000002cb3be0] __blk_run_queue at c000000000429860
10 [c000000002cb3c10] blk_delay_work at c00000000042a0ec
11 [c000000002cb3c40] process_one_work at c0000000000dac30
12 [c000000002cb3cd0] worker_thread at c0000000000db110
13 [c000000002cb3d80] kthread at c0000000000e3378
14 [c000000002cb3e30] ret_from_kernel_thread at c00000000000982c
The kernel buffer log is overfilled with this log:
[11261.952732] ibmvscsi: found no event struct in pool!
This patch reorders the operations during host teardown. Start by calling
the SRP transport and Scsi_Host remove functions to flush any outstanding
work and set the host offline. LLDD teardown follows including destruction
of the event pool, freeing the Command Response Queue (CRQ), and unmapping
any persistent buffers. The event pool destruction is protected by the
scsi_host lock, and the pool is purged prior of any requests for which we
never received a response. Finally, move the removal of the scsi host from
our global list to the end so that the host is easily locatable for
debugging purposes during teardown.
Cc: <stable@vger.kernel.org> # v2.6.12+
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For each ibmvscsi host created during a probe or destroyed during a remove
we either add or remove that host to/from the global ibmvscsi_head
list. This runs the risk of concurrent modification.
This patch adds a simple spinlock around the list modification calls to
prevent concurrent updates as is done similarly in the ibmvfc driver and
ipr driver.
Fixes: 32d6e4b6e4 ("scsi: ibmvscsi: add vscsi hosts to global list_head")
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Avoid that the following warnings are reported when building with W=1:
block/blk-cgroup.c:1755: warning: Function parameter or member 'q' not described in 'blkcg_schedule_throttle'
block/blk-cgroup.c:1755: warning: Function parameter or member 'use_memdelay' not described in 'blkcg_schedule_throttle'
block/blk-cgroup.c:1779: warning: Function parameter or member 'blkg' not described in 'blkcg_add_delay'
block/blk-cgroup.c:1779: warning: Function parameter or member 'now' not described in 'blkcg_add_delay'
block/blk-cgroup.c:1779: warning: Function parameter or member 'delta' not described in 'blkcg_add_delay'
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch avoids that the following warning is reported when building
with W=1:
block/blk-iolatency.c:734:5: warning: no previous prototype for 'blk_iolatency_init' [-Wmissing-prototypes]
Cc: Josef Bacik <jbacik@fb.com>
Fixes: d706751215 ("block: introduce blk-iolatency io controller") # v4.19
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This function is not used outside the block layer core. Hence unexport it.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For q->poll_nsec == -1, means doing classic poll, not hybrid poll.
We introduce a new flag BLK_MQ_POLL_CLASSIC to replace -1, which
may make code much easier to read.
Additionally, since val is an int obtained with kstrtoint(), val can be
a negative value other than -1, so return -EINVAL for that case.
Thanks to Damien Le Moal for some good suggestion.
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 003ca0fd2286 ("Refactor disassembler selection") in the binutils
repo, which changed the disassembler() function signature, so we must
use the feature test introduced in fb982666e3 ("tools/bpftool: fix
bpftool build with bintutils >= 2.9") to deal with that.
Committer testing:
After adding the missing function call to test-all.c, and:
FEATURE_CHECK_LDFLAGS-disassembler-four-args = -bfd -lopcodes
And the fallbacks for cases where we need -liberty and sometimes -lz to
tools/perf/Makefile.config, we get:
$ make -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory '/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j8' parallel build
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
... libaio: [ on ]
... disassembler-four-args: [ on ]
CC /tmp/build/perf/jvmti/libjvmti.o
CC /tmp/build/perf/builtin-bench.o
<SNIP>
$
$
The feature detection test-all.bin gets successfully built and linked:
$ ls -la /tmp/build/perf/feature/test-all.bin
-rwxrwxr-x. 1 acme acme 2680352 Mar 19 11:07 /tmp/build/perf/feature/test-all.bin
$ nm /tmp/build/perf/feature/test-all.bin | grep -w disassembler
0000000000061f90 T disassembler
$
Time to move on to the patches that make use of this disassembler()
routine in binutils's libopcodes.
Signed-off-by: Song Liu <songliubraving@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-13-songliubraving@fb.com
[ split from a larger patch, added missing FEATURE_CHECK_LDFLAGS-disassembler-four-args ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We found out that for v2 hw, a SATA disk can not be written to after the
system comes up.
In commit ffb1c820b8 ("scsi: hisi_sas: remove the check of sas_dev status
in hisi_sas_I_T_nexus_reset()"), we introduced a path where we may issue an
internal abort for a SATA device, but without following it with a
softreset.
We need to always follow an internal abort with a software reset, as per HW
programming flow, so add this.
Fixes: ffb1c820b8 ("scsi: hisi_sas: remove the check of sas_dev status in hisi_sas_I_T_nexus_reset()")
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The lpi_range_list is supposed to be sorted in ascending order of
->base_id (at least if the range merging is to work), but the current
comparison function returns a positive value if rb->base_id >
ra->base_id, which means that list_sort() will put A after B in that
case - and vice versa, of course.
Fixes: 880cb3cddd (irqchip/gic-v3-its: Refactor LPI allocator)
Cc: stable@vger.kernel.org (v4.19+)
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The arm64 config selects MULTI_IRQ_HANDLER, which was renamed to
GENERIC_IRQ_MULTI_HANDLER by commit 4c301f9b6a ("ARM: Convert
to GENERIC_IRQ_MULTI_HANDLER"). The 'new' option is already
selected, so just remove the obsolete entry.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Because map updates are distributed lazily, an OSD may not know about
the new blacklist for quite some time after "osd blacklist add" command
is completed. This makes it possible for a blacklisted but still alive
client to overwrite a post-blacklist update, resulting in data
corruption.
Waiting for latest osdmap in ceph_monc_blacklist_add() and thus using
the post-blacklist epoch for all post-blacklist requests ensures that
all such requests "wait" for the blacklist to come into force on their
respective OSDs.
Cc: stable@vger.kernel.org
Fixes: 6305a3b415 ("libceph: support for blacklisting clients")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
MAX_PHYSMEM_BITS only needs to be defined if CONFIG_SPARSEMEM is
enabled, and that was the case before commit 4ffe713b75
("powerpc/mm: Increase the max addressable memory to 2PB").
On 32-bit systems, where CONFIG_SPARSEMEM is not enabled, we now
define it as 46. That is larger than the real number of physical
address bits, and breaks calculations in zsmalloc:
mm/zsmalloc.c:130:49: warning: right shift count is negative
MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS))
^~
...
mm/zsmalloc.c:253:21: error: variably modified 'size_class' at file scope
struct size_class *size_class[ZS_SIZE_CLASSES];
^~~~~~~~~~
Fixes: 4ffe713b75 ("powerpc/mm: Increase the max addressable memory to 2PB")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When calling vmw_fb_set_par(), the mode stored in par->set_mode gets free'd
twice. The first free is in vmw_fb_kms_detach(), the second is near the
end of vmw_fb_set_par() under the name of 'old_mode'. The mode-setting code
only works correctly if the mode doesn't actually change. Removing
'old_mode' in favor of using par->set_mode directly fixes the problem.
Cc: <stable@vger.kernel.org>
Fixes: a278724aa2 ("drm/vmwgfx: Implement fbdev on kms v2")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
If it's not a system error and get_node implementation accommodate the
buffer object then it should return 0 with memm::mm_node set to NULL.
v2: Test for id != -ENOMEM instead of id == -ENOSPC.
Cc: <stable@vger.kernel.org>
Fixes: 4eb085e42f ("drm/vmwgfx: Convert to new IDA API")
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Lockdep warns that prepare_lock and genpd->mlock can cause a deadlock
the deadlock scenario is like following:
First thread is probing cs2000
cs2000_probe()
clk_register()
__clk_core_init()
clk_prepare_lock() ----> acquires prepare_lock
cs2000_recalc_rate()
i2c_smbus_read_byte_data()
rcar_i2c_master_xfer()
dma_request_chan()
rcar_dmac_of_xlate()
rcar_dmac_alloc_chan_resources()
pm_runtime_get_sync()
__pm_runtime_resume()
rpm_resume()
rpm_callback()
genpd_runtime_resume() ----> acquires genpd->mlock
Second thread is attaching any device to the same PM domain
genpd_add_device()
genpd_lock() ----> acquires genpd->mlock
cpg_mssr_attach_dev()
of_clk_get_from_provider()
__of_clk_get_from_provider()
__clk_create_clk()
clk_prepare_lock() ----> acquires prepare_lock
Since currently no PM provider access genpd's critical section
in .attach_dev, and .detach_dev callbacks, so there is no need to protect
these two callbacks with genpd->mlock.
This patch avoids a potential deadlock by moving out .attach_dev and .detach_dev
from genpd->mlock, so that genpd->mlock won't be held when prepare_lock is acquired
in .attach_dev and .detach_dev
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When commit 8661423eea ("ACPI / utils: Add new acpi_dev_present
helper") introduced acpi_dev_present(), it missed the fact that
bus_find_device() took a reference on the device found by it and
the callers of acpi_dev_present() don't drop that reference.
Drop the reference on the device in acpi_dev_present().
Fixes: 8661423eea ("ACPI / utils: Add new acpi_dev_present helper")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch adds processing of PERF_BPF_EVENT_PROG_LOAD, which sets
proper DSO type/id/etc of memory regions mapped to BPF programs to
DSO_BINARY_TYPE__BPF_PROG_INFO.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-14-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a new dso type DSO_BINARY_TYPE__BPF_PROG_INFO for BPF programs. In
symbol__disassemble(), DSO_BINARY_TYPE__BPF_PROG_INFO dso will call into a new
function symbol__disassemble_bpf() in an upcoming patch, where annotation line
information is filled based bpf_prog_info and btf saved in given perf_env.
Committer notes:
Removed the unnamed union with 'bpf_prog' and 'cache' in 'struct dso',
to fix this bug when exiting 'perf top':
# perf top
perf: Segmentation fault
-------- backtrace --------
perf[0x5a785a]
/lib64/libc.so.6(+0x385bf)[0x7fd68443c5bf]
perf(rb_first+0x2b)[0x4d6eeb]
perf(dso__delete+0xb7)[0x4dffb7]
perf[0x4f9e37]
perf(perf_session__delete+0x64)[0x504df4]
perf(cmd_top+0x1957)[0x454467]
perf[0x4aad18]
perf(main+0x61c)[0x42ec7c]
/lib64/libc.so.6(__libc_start_main+0xf2)[0x7fd684428412]
perf(_start+0x2d)[0x42eead]
#
# addr2line -fe ~/bin/perf 0x4dffb7
dso_cache__free
/home/acme/git/perf/tools/perf/util/dso.c:713
That is trying to access the dso->data.cache, and that is not used with
BPF programs, so we end up accessing what is in bpf_prog.first_member,
b00m.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-13-songliubraving@fb.com
[ split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Both libbfd and libopcodes are distributed with binutil-dev/devel. When
libbfd is present, it is OK to assume that libopcodes also present. This
has been a safe assumption for bpftool.
This patch adds -lopcodes to perf/Makefile.config. libopcodes will be
used in the next commit for BPF annotation.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-12-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch enables 'perf record' to save BTF information as headers to
perf.data.
A new header type HEADER_BPF_BTF is introduced for this data.
Committer testing:
As root, being on the kernel sources top level directory, run:
# perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c -e *msg
Just to compile and load a BPF program that attaches to the
raw_syscalls:sys_{enter,exit} tracepoints to trace the syscalls ending
in "msg" (recvmsg, sendmsg, recvmmsg, sendmmsg, etc).
Make sure you have a recent enough clang, say version 9, to get the
BTF ELF sections needed for this testing:
# clang --version | head -1
clang version 9.0.0 (https://git.llvm.org/git/clang.git/ 7906282d3afec5dfdc2b27943fd6c0309086c507) (https://git.llvm.org/git/llvm.git/ a1b5de1ff8ae8bc79dc8e86e1f82565229bd0500)
# readelf -SW tools/perf/examples/bpf/augmented_raw_syscalls.o | grep BTF
[22] .BTF PROGBITS 0000000000000000 000ede 000b0e 00 0 0 1
[23] .BTF.ext PROGBITS 0000000000000000 0019ec 0002a0 00 0 0 1
[24] .rel.BTF.ext REL 0000000000000000 002fa8 000270 10 30 23 8
Then do a systemwide perf record session for a few seconds:
# perf record -a sleep 2s
Then look at:
# perf report --header-only | grep b[pt]f
# event : name = cycles:ppp, , id = { 1116204, 1116205, 1116206, 1116207, 1116208, 1116209, 1116210, 1116211 }, size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|PERIOD, read_format = ID, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, enable_on_exec = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1, ksymbol = 1, bpf_event = 1
# bpf_prog_info of id 13
# bpf_prog_info of id 14
# bpf_prog_info of id 15
# bpf_prog_info of id 16
# bpf_prog_info of id 17
# bpf_prog_info of id 18
# bpf_prog_info of id 21
# bpf_prog_info of id 22
# bpf_prog_info of id 51
# bpf_prog_info of id 52
# btf info of id 8
#
We need to show more info about these BPF and BTF entries , but that can
be done later.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-10-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
BTF contains information necessary to annotate BPF programs. This patch
saves BTF for BPF programs loaded in the system.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-9-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch enables perf-record to save bpf_prog_info information as
headers to perf.data. A new header type HEADER_BPF_PROG_INFO is
introduced for this data.
Committer testing:
As root, being on the kernel sources top level directory, run:
# perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c -e *msg
Just to compile and load a BPF program that attaches to the
raw_syscalls:sys_{enter,exit} tracepoints to trace the syscalls ending
in "msg" (recvmsg, sendmsg, recvmmsg, sendmmsg, etc).
Then do a systemwide perf record session for a few seconds:
# perf record -a sleep 2s
Then look at:
# perf report --header-only | grep -i bpf
# bpf_prog_info of id 13
# bpf_prog_info of id 14
# bpf_prog_info of id 15
# bpf_prog_info of id 16
# bpf_prog_info of id 17
# bpf_prog_info of id 18
# bpf_prog_info of id 21
# bpf_prog_info of id 22
# bpf_prog_info of id 208
# bpf_prog_info of id 209
#
We need to show more info about these programs, like bpftool does for
the ones running on the system, i.e. 'perf record/perf report' become a
way of saving the BPF state in a machine to then analyse on another,
together with all the other information that is already saved in the
perf.data header:
# perf report --header-only
# ========
# captured on : Tue Mar 12 11:42:13 2019
# header version : 1
# data offset : 296
# data size : 16294184
# feat offset : 16294480
# hostname : quaco
# os release : 5.0.0+
# perf version : 5.0.gd783c8
# arch : x86_64
# nrcpus online : 8
# nrcpus avail : 8
# cpudesc : Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
# cpuid : GenuineIntel,6,142,10
# total memory : 24555720 kB
# cmdline : /home/acme/bin/perf (deleted) record -a
# event : name = cycles:ppp, , id = { 3190123, 3190124, 3190125, 3190126, 3190127, 3190128, 3190129, 3190130 }, size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|CPU|PERIOD, read_format = ID, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1
# CPU_TOPOLOGY info available, use -I to display
# NUMA_TOPOLOGY info available, use -I to display
# pmu mappings: intel_pt = 8, software = 1, power = 11, uprobe = 7, uncore_imc = 12, cpu = 4, cstate_core = 18, uncore_cbox_2 = 15, breakpoint = 5, uncore_cbox_0 = 13, tracepoint = 2, cstate_pkg = 19, uncore_arb = 17, kprobe = 6, i915 = 10, msr = 9, uncore_cbox_3 = 16, uncore_cbox_1 = 14
# CACHE info available, use -I to display
# time of first sample : 116392.441701
# time of last sample : 116400.932584
# sample duration : 8490.883 ms
# MEM_TOPOLOGY info available, use -I to display
# bpf_prog_info of id 13
# bpf_prog_info of id 14
# bpf_prog_info of id 15
# bpf_prog_info of id 16
# bpf_prog_info of id 17
# bpf_prog_info of id 18
# bpf_prog_info of id 21
# bpf_prog_info of id 22
# bpf_prog_info of id 208
# bpf_prog_info of id 209
# missing features: TRACING_DATA BRANCH_STACK GROUP_DESC AUXTRACE STAT CLOCKID DIR_FORMAT
# ========
#
Committer notes:
We can't use the libbpf unconditionally, as the build may have been with
NO_LIBBPF, when we end up with linking errors, so provide dummy
{process,write}_bpf_prog_info() wrapped by HAVE_LIBBPF_SUPPORT for that
case.
Printing are not affected by this, so can continue as is.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-8-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf_prog_info contains information necessary to annotate bpf programs.
This patch saves bpf_prog_info for bpf programs loaded in the system.
Some big picture of the next few patches:
To fully annotate BPF programs with source code mapping, 4 different
informations are needed:
1) PERF_RECORD_KSYMBOL
2) PERF_RECORD_BPF_EVENT
3) bpf_prog_info
4) btf
Before this set, 1) and 2) in the list are already saved to perf.data
file. For BPF programs that are already loaded before perf run, 1) and 2)
are synthesized by perf_event__synthesize_bpf_events(). For short living
BPF programs, 1) and 2) are generated by kernel.
This set handles 3) and 4) from the list. Again, it is necessary to handle
existing BPF program and short living program separately.
This patch handles 3) for exising BPF programs while synthesizing 1) and
2) in perf_event__synthesize_bpf_events(). These data are stored in
perf_env. The next patch saves these data from perf_env to perf.data as
headers.
Similarly, the two patches after the next saves 4) of existing BPF
programs to perf_env and perf.data.
Another patch later will handle 3) and 4) for short living BPF programs
by monitoring 1) and 2) in a dedicate thread.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-7-songliubraving@fb.com
[ set env->bpf_progs.infos_cnt to zero in perf_env__purge_bpf() as noted by jolsa ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch changes the arguments of perf_event__synthesize_bpf_events()
to include perf_session* instead of perf_tool*. perf_session will be
used in the next patch.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-6-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With bpf_program__get_prog_info_linear, we can simplify the logic that
synthesizes bpf events.
This patch doesn't change the behavior of the code.
Commiter notes:
Needed this (for all four variables), suggested by Song, to overcome
build failure on debian experimental cross building to MIPS 32-bit:
- u8 (*prog_tags)[BPF_TAG_SIZE] = (void *)(info->prog_tags);
+ u8 (*prog_tags)[BPF_TAG_SIZE] = (void *)(uintptr_t)(info->prog_tags);
util/bpf-event.c: In function 'perf_event__synthesize_one_bpf_prog':
util/bpf-event.c:143:35: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
u8 (*prog_tags)[BPF_TAG_SIZE] = (void *)(info->prog_tags);
^
util/bpf-event.c:144:22: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
__u32 *prog_lens = (__u32 *)(info->jited_func_lens);
^
util/bpf-event.c:145:23: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
__u64 *prog_addrs = (__u64 *)(info->jited_ksyms);
^
util/bpf-event.c:146:22: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
void *func_infos = (void *)(info->func_info);
^
cc1: all warnings being treated as errors
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: kernel-team@fb.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-5-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, bpf_prog_info includes 9 arrays. The user has the option to
fetch any combination of these arrays. However, this requires a lot of
handling.
This work becomes more tricky when we need to store bpf_prog_info to a
file, because these arrays are allocated independently.
This patch introduces 'struct bpf_prog_info_linear', which stores arrays
of bpf_prog_info in continuous memory.
Helper functions are introduced to unify the work to get different sets
of bpf_prog_info. Specifically, bpf_program__get_prog_info_linear()
allows the user to select which arrays to fetch, and handles details for
the user.
Please see the comments right before 'enum bpf_prog_info_array' for more
details and examples.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lkml.kernel.org/r/ce92c091-e80d-a0c1-4aa0-987706c42b20@iogearbox.net
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: kernel-team@fb.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-3-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, monitoring of BPF programs through bpf_event is off by
default for 'perf record'.
To turn it on, the user need to use option "--bpf-event". As BPF gets
wider adoption in different subsystems, this option becomes
inconvenient.
This patch makes bpf_event on by default, and adds option "--no-bpf-event"
to turn it off. Since option --bpf-event is not released yet, it is safe
to remove it.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: kernel-team@fb.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Link: http://lkml.kernel.org/r/20190312053051.2690567-2-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
=================================================================
==20875==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 1160 byte(s) in 1 object(s) allocated from:
#0 0x7f1b6fc84138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138)
#1 0x55bd50005599 in zalloc util/util.h:23
#2 0x55bd500068f5 in perf_evsel__newtp_idx util/evsel.c:327
#3 0x55bd4ff810fc in perf_evsel__newtp /home/work/linux/tools/perf/util/evsel.h:216
#4 0x55bd4ff81608 in test__perf_evsel__tp_sched_test tests/evsel-tp-sched.c:69
#5 0x55bd4ff528e6 in run_test tests/builtin-test.c:358
#6 0x55bd4ff52baf in test_and_print tests/builtin-test.c:388
#7 0x55bd4ff543fe in __cmd_test tests/builtin-test.c:583
#8 0x55bd4ff5572f in cmd_test tests/builtin-test.c:722
#9 0x55bd4ffc4087 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302
#10 0x55bd4ffc45c6 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354
#11 0x55bd4ffc49ca in run_argv /home/changbin/work/linux/tools/perf/perf.c:398
#12 0x55bd4ffc5138 in main /home/changbin/work/linux/tools/perf/perf.c:520
#13 0x7f1b6e34809a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a)
Indirect leak of 19 byte(s) in 1 object(s) allocated from:
#0 0x7f1b6fc83f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30)
#1 0x7f1b6e3ac30f in vasprintf (/lib/x86_64-linux-gnu/libc.so.6+0x8830f)
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes: 6a6cd11d4e ("perf test: Add test for the sched tracepoint format fields")
Link: http://lkml.kernel.org/r/20190316080556.3075-17-changbin.du@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jianguo Chen