Commit Graph

129493 Commits

Author SHA1 Message Date
David Daney ec454d8c4f MIPS: Add Cavium OCTEON slot into proper tlb category.
Expand the case statement for build_tlb_write_entry so that it does
the right thing on Cavium CPU variants.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: Paul Gortmaker <Paul.Gortmaker@windriver.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:24 +00:00
David Daney 126336f065 MIPS: Compute branch returns for Cavium OCTEON specific branch instructions.
For Cavium OCTEON, compute the return epc value for OCTEON specific
branch instructions.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:24 +00:00
David Daney 2a219b0eaa MIPS: Cavium OCTEON multiplier state preservation.
For OCTEON, implement a save and restore of the multiplier state
across context switches.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:24 +00:00
David Daney ddcdb1b4a4 MIPS: Add SMP_ICACHE_FLUSH for the Cavium CPU family.
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: Paul Gortmaker <Paul.Gortmaker@windriver.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:24 +00:00
David Daney babed55569 MIPS: Add Cavium OCTEON specific registers to ptrace.h and asm-offsets.c
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:23 +00:00
David Daney b5e00af81f MIPS: Add Cavium OCTEON cop2/cvmseg state entries to processor.h.
Add in the cop2 and cvmseg state info to the known proc reg
data for Cavium so that it can be tracked, saved, restored.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:22 +00:00
David Daney 8faca49a67 MIPS: Modify core io.h macros to account for the Octeon Errata Core-301.
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:22 +00:00
David Daney 7e69deb83c MIPS: Hook up Cavium OCTEON in arch/mips.
Take all the OCTEON specific files that were added, and hook them into
the build system for the arch/mips.  For versions of GCC that lack
OCTEON support, override gas target architecture.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:22 +00:00
David Daney 47d979eca3 MIPS: Hook Cavium OCTEON cache init into cache.c
Follow precedent of other boards, and hook-up the CPU specific cache
init.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:22 +00:00
David Daney 0dd4781bca MIPS: Add Cavium OCTEON processor constants and CPU probe.
Add OCTEON constants to asm/cpu.h and asm/module.h.

Add probe function for Cavium OCTEON CPUs and hook it up.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:22 +00:00
David Daney 25c3000300 MIPS: Override assembler target architecture for octeon.
Gas from binutils 2.19 fails to compile some cop1 instructions with
-march=octeon.  Since the cop1 instructions are present in mips1, use
that arch instead.  This will be fixed in binutils 2.20.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:21 +00:00
David Daney ed918c2daf MIPS: Add Cavium OCTEON specific register definitions to mipsregs.h
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:21 +00:00
David Daney f9bb4cf37a MIPS: For Cavium OCTEON set hwrena and lazily restore CP2 state.
If on Cavium, be aware of cop2 and hwrena during do_cpu().

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: Paul Gortmaker <Paul.Gortmaker@windriver.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:21 +00:00
David Daney bd6d85c21a MIPS: For Cavium OCTEON handle hazards as per the R10000 handling.
For Cavium CPU, we treat the same as R10000, in that all hazards
are dealt with in hardware.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: Paul Gortmaker <Paul.Gortmaker@windriver.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:21 +00:00
David Daney 5b3b16880f MIPS: Add Cavium OCTEON processor support files to arch/mips/cavium-octeon.
These are the rest of the new files needed to add OCTEON processor
support to the Linux kernel.  Other than Makefile and Kconfig which
should be obvious, we have:

csrc-octeon.c   -- Clock source driver for OCTEON.
dma-octeon.c    -- Helper functions for mapping DMA memory.
flash_setup.c   -- Register on-board flash with the MTD subsystem.
octeon-irq.c    -- OCTEON interrupt controller managment.
octeon-memcpy.S -- Optimized memcpy() implementation.
serial.c        -- Register 8250 platform driver and early console.
setup.c         -- Early architecture initialization.
smp.c           -- OCTEON SMP support.
octeon_switch.S -- Scheduler context switch for OCTEON.
c-octeon.c      -- OCTEON cache controller support.
cex-oct.S       -- OCTEON cache exception handler.

asm/mach-cavium-octeon/*.h -- Architecture include files.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/cavium-octeon/Kconfig
 create mode 100644 arch/mips/cavium-octeon/Makefile
 create mode 100644 arch/mips/cavium-octeon/csrc-octeon.c
 create mode 100644 arch/mips/cavium-octeon/dma-octeon.c
 create mode 100644 arch/mips/cavium-octeon/flash_setup.c
 create mode 100644 arch/mips/cavium-octeon/octeon-irq.c
 create mode 100644 arch/mips/cavium-octeon/octeon-memcpy.S
 create mode 100644 arch/mips/cavium-octeon/serial.c
 create mode 100644 arch/mips/cavium-octeon/setup.c
 create mode 100644 arch/mips/cavium-octeon/smp.c
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/irq.h
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/war.h
 create mode 100644 arch/mips/include/asm/octeon/octeon.h
 create mode 100644 arch/mips/kernel/octeon_switch.S
 create mode 100644 arch/mips/mm/c-octeon.c
 create mode 100644 arch/mips/mm/cex-oct.S
2009-01-11 09:57:21 +00:00
David Daney 58f07778ce MIPS: Add Cavium OCTEON processor support files to arch/mips/cavium-octeon/executive and asm/octeon.
These files are used to coordinate resource sharing between all of
the programs running on the OCTEON SOC.  The OCTEON processor has many
CPU cores (current parts have up to 16, but more are possible).  It
also has a variety of on-chip hardware blocks for things like network
acceleration, encryption and RAID.

One typical configuration is to run Linux on several of the CPU cores,
and other dedicated applications on the other cores.

Resource allocation between the various programs running on the system
(Linux kernel and other dedicated applications) needs to be
coordinated.  The code we use to do this we call the 'executive'.  All
of this resource allocation and sharing code is gathered together in
the executive directory.

Included in the patch set are the following files:

cvmx-bootmem.c and cvmx-sysinfo.c -- Coordinate memory allocation.
All memory used by the Linux kernel is obtained here at boot time.

cvmx-l2c.c -- Coordinates operations on the shared level 2 cache.

octeon-model.c  -- Probes chip capabilities and version.

The corresponding headers are in asm/octeon.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/cavium-octeon/executive/Makefile
 create mode 100644 arch/mips/cavium-octeon/executive/cvmx-bootmem.c
 create mode 100644 arch/mips/cavium-octeon/executive/cvmx-l2c.c
 create mode 100644 arch/mips/cavium-octeon/executive/cvmx-sysinfo.c
 create mode 100644 arch/mips/cavium-octeon/executive/octeon-model.c
 create mode 100644 arch/mips/include/asm/octeon/cvmx-asm.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-bootinfo.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-bootmem.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-l2c.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-packet.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-spinlock.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-sysinfo.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx.h
 create mode 100644 arch/mips/include/asm/octeon/octeon-feature.h
 create mode 100644 arch/mips/include/asm/octeon/octeon-model.h
2009-01-11 09:57:20 +00:00
David Daney 54293ec307 MIPS: Add Cavium OCTEON processor CSR definitions
Here we define the addresses and bit-fields of the Configuration and
Status Registers (CSRs) for some of the hardware functional units on
the OCTEON SOC.

Definitions are needed for:

CIU  -- Central Interrupt Unit.
GPIO -- General Purpose Input Output.
IOB  -- Input / Output {Busing,Bridge}.
IPD  -- Input Packet Data unit.
L2C  -- Level-2 Cache controller.
L2D  -- Level-2 Data cache.
L2T  -- Level-2 cache Tag.
LED  -- Light Emitting Diode controller.
MIO  -- Miscellaneous Input / Output.
POW  -- Packet Order / Work unit.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:20 +00:00
Julia Lawall 2bd2dd059c MIPS: Alchemy: Change strict_strtol to strict_strtoul
Since memsize is unsigned, it would seem better to use strict_strtoul that
strict_strtol.

A simplified version of the semantic patch that makes this change is as
follows: (http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@s2@
long e;
position p;
@@

strict_strtol@p(...,&e)

@@
position p != s2.p;
type T;
T e;
@@

- strict_strtol@p
+ strict_strtoul
  (...,&e)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:19 +00:00
Anirban Sinha 797c3f3224 MIPS: 64-bit: Use generic 32-bit ptrace compat code.
Signed-off-by: Anirban Sinha <asinha@zeugmasystems.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-01-11 09:57:19 +00:00
Timur Tabi 3bc53427e4 ucc_geth: use correct UCCE macros
The UCC Event Register (UCCE) already has unambigous macro definitions in qe.h,
so we should not be defining our own in the UCC Ethernet driver.

Removed unused local variable 'dev' from ucc_geth_poll(), which fixes
a warning caused by commit 908a7a16b8
("net: Remove unused netdev arg from some NAPI interfaces.").

Replaced in_be/out_be pairs with setbits32 or clrbits32, where applicable.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:25:21 -08:00
Dan Williams 649274d993 net_dma: acquire/release dma channels on ifup/ifdown
The recent dmaengine rework removed the capability to remove dma device
driver modules while net_dma is active.  Rather than notify
dmaengine-clients that channels are trying to be removed, we now rely on
clients to notify dmaengine when they no longer have a need for
channels.  Teach net_dma to release channels by taking dmaengine
references at netdevice open and dropping references at netdevice close.

Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:20:39 -08:00
Roland Dreier 47fd23fe8e cxgb3: Keep LRO off if disabled when interface is down
I have a system with a Chelsio adapter (driven by cxgb3) whose ports are
part of a Linux bridge.  Recently I updated the kernel and discovered
that things stopped working because cxgb3 was doing LRO on packets that
were passed into the bridge code for forwarding.  (Incidentally, this
problem manifested itself in a strange way that made debugging a bit
interesting -- for some reason, the skb_warn_if_lro() check in bridge
didn't trigger and these LROed packets were forwarded out a forcedeth
interface, and caused the forcedeth transmit path to get stuck)

This is because cxgb3 has no way of keeping state for the LRO flag until
the interface is brought up, so if the bridging code disables LRO while
the interface is down, then cxgb3_up() will just reenable LRO, and on my
Debian system at least, the init scripts add interfaces to a bridge
before bringing the interfaces up.

Fix this by keeping track of each interface's LRO state in cxgb3 so that
when bridge disables LRO, it stays disabled in cxgb3_up() when the
interface is brought up.  I did this by changing the rx_csum_offload
flag into a pair of bit flags; the effect of this on the rx_eth() fast
path is miniscule enough that it should be fine (eg on x86, a cmpb
instruction becomes a testb instruction).

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:19:36 -08:00
Ben Hutchings 2a7e637de5 sfc: SFT9001: Fix condition for LNPGA power-off
Only the SFX7101 requires software power control.  This was
incorrectly being applied to the SFT9001 rev A as well.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:18:13 -08:00
Gerrit Renker 4dbc242ed3 dccp ccid-3: Fix RFC reference
Thanks to Wei and Arnaldo for pointing out the correct
new reference for CCID-3.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:17:22 -08:00
Steve Glendinning 08168f7164 smsc911x: register irq with device name, not driver name
This change lets "cat /proc/interrupts" show the name of the ethernet
device (e.g. eth0) rather than the driver name (smsc911x).

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:14:52 -08:00
Steve Glendinning 702403af28 smsc911x: fix smsc911x_reg_read compiler warning
if this code path is ever hit, the platform_data struct isn't properly
configured with a bus width flag so the device won't work (hence the
BUG()).

This patch adds a dummy return statement to eliminate this compiler
warning:

drivers/net/smsc911x.c: In function 'smsc911x_reg_read':
drivers/net/smsc911x.c:148: warning: control reaches end of non-void function

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:14:27 -08:00
Ayaz Abdulla eb10a78182 forcedeth: napi schedule lock fix
This patch fixes a potential race condition between scheduling napi and
completing napi poll. The call to netif_rx_schedule should be under
protection of the lock (as is the completion), otherwise, interrupts
could be masked off.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:11:28 -08:00
Leonardo Potenza 1b6725dea7 net: fix section mismatch warnings in dccp/ccids/lib/tfrc.c
Removed the __exit annotation of tfrc_lib_exit(), in order to suppress the following section mismatch messages:

WARNING: net/dccp/dccp.o(.text+0xd9): Section mismatch in reference from the function ccid_cleanup_builtins() to the function .exit.text:tfrc_lib_exit()
The function ccid_cleanup_builtins() references a function in an exit section.
Often the function tfrc_lib_exit() has valid usage outside the exit section
and the fix is to remove the __exit annotation of tfrc_lib_exit.

WARNING: net/dccp/dccp.o(.init.text+0x48): Section mismatch in reference from the function ccid_initialize_builtins() to the function .exit.text:tfrc_lib_exit()
The function __init ccid_initialize_builtins() references
a function __exit tfrc_lib_exit().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __exit annotation of
tfrc_lib_exit() so it may be used outside an exit section.

Signed-off-by: Leonardo Potenza <lpotenza@inwind.it>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:11:28 -08:00
Ayaz Abdulla a7ee2f73f3 forcedeth: remove mgmt unit for mcp79 chipset
This patch removes the feature flag for mgmt unit as it is not used for
this chipset.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:07:36 -08:00
Ron Mercer 683d46a979 qlge: Remove dynamic alloc of rx ring control blocks.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:07:36 -08:00
Ron Mercer 0857e9d73f qlge: Fix schedule while atomic issue.
There is no need to sleep while waiting for the hardware
semaphore to become available.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:07:35 -08:00
Ron Mercer 697cdc4680 qlge: Remove support for device ID 8000.
Support for dev id 8000 is pushed out until 2.6.30.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:07:35 -08:00
Ron Mercer 9734552439 qlge: Get rid of split addresses in hardware control blocks.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:07:34 -08:00
Ron Mercer ba7cd3ba97 qlge: Get rid of volatile usage for shadow register.
Putting back ql_read_sh_reg() function and using rmb() instead of
volatile.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:07:34 -08:00
Ayaz Abdulla f1405d32e3 forcedeth: version bump and copyright
This patch bumps up the version number and adds current year to copyright.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:07:33 -08:00
Ayaz Abdulla 001eb84bbf forcedeth: xmit lock fix
This patch fixes a potential race condition between xmit thread and xmit
completion thread. The calculation of empty tx descriptors is not
performed under the lock. This could cause it to set the stop flag while
the completion thread finishes all tx's. This will result in the tx
queue in stopped state and no one to wake it up.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:07:32 -08:00
Stephen Hemminger 52255bbe35 netdev: missing validate_address hooks
Some devices were converted incorrectly and are missing the validate
address hooks.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:06:42 -08:00
Stephen Hemminger fe96aaa14f netdev: add missing set_mac_address hook
Many drivers lost the ability to set ethernet address accidently
during the net_device_ops conversion.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:06:36 -08:00
Clifford Wolf 0faac9f75f netdev: gianfar: add MII ioctl handler
This is the same kind of wrapper that can also be found in many
other network device drivers.

Tested with a freescale MPC8349E host CPU:
Toggled the interface LEDs on a DP83865 PHY.

Signed-off-by: Clifford Wolf <clifford@clifford.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:06:35 -08:00
Julia Lawall 43baa5bb26 drivers/net/wireless/libertas: move a dereference below a NULL test
In each case, if the NULL test is necessary, then the dereference should be
moved below the NULL test.  I have also taken advantage of the availability
of the value of priv->dev in the subsequent calls to netif_stop_queue and
netif_carrier_off.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@

- T i = E->fld;
+ T i;
  ... when != E
      when != i
  if (E == NULL) S
+ i = E->fld;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:06:35 -08:00
Julia Lawall 0397a26484 drivers/net/hamradio/6pack.c: move a dereference below a NULL test
In each case, if the NULL test is necessary, then the dereference should be
moved below the NULL test.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@

- T i = E->fld;
+ T i;
  ... when != E
      when != i
  if (E == NULL) S
+ i = E->fld;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:06:34 -08:00
Julia Lawall debc251b60 drivers/isdn/hardware/mISDN: move a dereference below a NULL test
In each case, if the NULL test is necessary, then the dereference should be
moved below the NULL test.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@

- T i = E->fld;
+ T i;
  ... when != E
      when != i
  if (E == NULL) S
+ i = E->fld;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:06:34 -08:00
Julia Lawall f3d8b2e467 net/bridge/netfilter: move a dereference below a NULL test
In each case, if the NULL test is necessary, then the dereference should be
moved below the NULL test.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@

- T i = E->fld;
+ T i;
  ... when != E
      when != i
  if (E == NULL) S
+ i = E->fld;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:06:33 -08:00
Julia Lawall 6c614a5020 net/tipc/bcast.h: use ARRAY_SIZE
ARRAY_SIZE is more concise to use when the size of an array is divided by
the size of its type or the size of its first element.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@i@
@@

#include <linux/kernel.h>

@depends on i using "paren.iso"@
type T;
T[] E;
@@

- (sizeof(E)/sizeof(T))
+ ARRAY_SIZE(E)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:06:33 -08:00
Inaky Perez-Gonzalez 2a4d71d69f wimax: fix typo in kernel-doc for debugfs_dentry in struct wimax_dev
The kernel-doc was referring to member @debufs_dentry instead of
@debugfs_dentry.

Reported by Randy Dunlap http://marc.info/?l=linux-netdev&m=123147942302885&w=2

As well, escape the colon in the field's text description, as it is
causing the generated text to be erraticly broken up (with paragraphs
moved down). Could not find a reason why it is happening so, even when
other field descriptions use colons and work as expected.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:06:32 -08:00
Steffen Klassert c17931c52e 3c59x: Use device_set_wakeup_enable
Since dev->power.should_wakeup bit is used by the PCI core to
decide whether the device should wake up the system from sleep
states, set this bit by calling device_set_wakeup_enable().

This restores proper WOL for the 3c59x driver.

Reported-and-tested-by: Graeme Wilford <gwilford@gmail.com>
Reported-by: Gunnar Degnbol <degnbol@danbbs.dk>
Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:06:32 -08:00
Frank Blaschka 3d58cefd82 qeth: fix usage of netdev_ops
Have separate netdev_ops for OSA and HiperSocket/TR.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:05:16 -08:00
Jesper Dangaard Brouer c224969e63 qlge: Naming interrupt vectors
Name interrupt vectors according to the new naming standard, by Robert
Olsson and DaveM.

The qlge driver were very close to the new standard, thus the change
is kind of trivial.

Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:04:12 -08:00
Felix Fietkau 4ca857958c b44: fix misalignment and wasted space in rx handling
Broadcom 4400 puts a header of configurable size (apparently needs
to be at least 28 bytes) in front of received packets. When handling
this, the previous code accidentally added the offset 30 *twice* for
the software and once for the hardware, thereby cancelling out the
IP alignment effect of the 30 byte padding and wasting an additional
30 bytes of memory per packet.

This patch fixes this problem and improves routing throughput by
about 30% on MIPS, where unaligned access is expensive.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:04:12 -08:00
Herbert Xu 9498c05820 ipcomp: Remove spurious truesize increase
When I made ipcomp use frags, I forgot to take out the original
truesize update that was added for pskb_expand_head.  As we no
longer expand the head of skb, that update should have been removed.

This bug is not related to the truesize warnings since we only
made it bigger than what it should've been.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11 00:04:11 -08:00