Commit Graph

216 Commits

Author SHA1 Message Date
Jiri Kosina c062c4d1de Merge branch 'uhid' into for-linus
Conflicts:
	drivers/hid/Kconfig
2012-07-24 13:40:06 +02:00
Jiri Kosina 929bd380b7 Merge branches 'hidraw', 'magicmouse', 'multitouch', 'roccat', 'suspend-fixes' and 'upstream' into for-linus 2012-07-24 13:39:00 +02:00
Benjamin Tissoires e9a09aed3e HID: hid-multitouch: add support for Zytronic panels
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-19 13:56:16 +02:00
Tom Harwood ff9bf5a2ef HID: Add driver for Holtek based keyboards with broken HID
Corrects two HID descriptor issues, which prevent some Holtek based
(USB ID 04d9:a055) keyboards from working. The error when not using
the driver is: generic-usb: probe ... failed with error -22 .

Signed-off-by: Tom Harwood <tomharwood@fastmail.fm>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-07-12 12:34:43 +02:00
Benjamin Tissoires 82d069822f HID: hid-multitouch: add support for Zytronic panels
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-06-28 10:29:55 +02:00
Linus Torvalds 60d2c25251 Merge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:
 "The most important one is a purification of Kconfig for CONFIG_HID;
  the inclusion of HID groups and autoloading didn't leave the Kconfig
  in a really consistent state.  Henrik's patch fixes that.  In addition
  to that, there are two small fixes for logitech and magicmouse
  drivers."

* 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Fix the generic Kconfig options
  HID: magicmouse: Correct report range of major / minor axes
  HID: logitech: don't use stack based dj_report structures
2012-06-26 11:23:41 -07:00
Henrik Rydberg 1f41a6a994 HID: Fix the generic Kconfig options
The generic HID driver is obviously not a special driver, so move it
outside of the special drivers menu. Explain the usage and make the
default follow the HID setting. This should simplify migration from
older kernels. While at it, remove the redundant HID_SUPPORT option
and modify the HID and USB_HID entries to better explain the bus
structure.

Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-06-25 17:25:00 +02:00
Bryan Wu 25976a796c HID: select NEW_LEDS for driver of Lenovo ThinkPad USB Keyboard with TrackPoint
commit 'HID: Driver for Lenovo Keyboard with Trackpoint'
(c1dcad2d32) introduced a compiling error due to
unmetting dependency of CONFIG_LEDS_CLASS.

on i386:

ERROR: "led_brightness_set" [drivers/leds/led-class.ko] undefined!
ERROR: "leds_list" [drivers/leds/led-class.ko] undefined!
ERROR: "leds_list_lock" [drivers/leds/led-class.ko] undefined!

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-06-18 15:28:05 +02:00
David Herrmann 1ccd7a2a33 HID: uhid: introduce user-space I/O driver support for HID
This adds a dummy driver that will support user-space I/O drivers for the
HID subsystem. This allows to write transport-level drivers like USB-HID
and Bluetooth-HID in user-space.

Low-Energy Bluetooth needs this to feed HID data that is parsed in
user-space back into the kernel.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-06-18 13:41:59 +02:00
Bernhard Seibold c1dcad2d32 HID: Driver for Lenovo Keyboard with Trackpoint
This driver for the "Lenovo ThinkPad USB Keyboard with Trackpoint" supports
setting various device attributes, controlling mute and microphone mute
LEDs and enables use of the microphone mute key.

Signed-off-by: Bernhard Seibold <mail@bernhard-seibold.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-06-08 10:44:10 +02:00
Linus Torvalds e8650a0823 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial updates from Jiri Kosina:
 "As usual, it's mostly typo fixes, redundant code elimination and some
  documentation updates."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits)
  edac, mips: don't change code that has been removed in edac/mips tree
  xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer
  lib: Change mail address of Oskar Schirmer
  net: Change mail address of Oskar Schirmer
  arm/m68k: Change mail address of Sebastian Hess
  i2c: Change mail address of Oskar Schirmer
  net: Fix tcp_build_and_update_options comment in struct tcp_sock
  atomic64_32.h: fix parameter naming mismatch
  Kconfig: replace "--- help ---" with "---help---"
  c2port: fix bogus Kconfig "default no"
  edac: Fix spelling errors.
  qla1280: Remove redundant NULL check before release_firmware() call
  remoteproc: remove redundant NULL check before release_firmware()
  qla2xxx: Remove redundant NULL check before release_firmware() call.
  aic94xx: Get rid of redundant NULL check before release_firmware() call
  tehuti: delete redundant NULL check before release_firmware()
  qlogic: get rid of a redundant test for NULL before call to release_firmware()
  bna: remove redundant NULL test before release_firmware()
  tg3: remove redundant NULL test before release_firmware() call
  typhoon: get rid of redundant conditional before all to release_firmware()
  ...
2012-05-22 19:22:50 -07:00
Jiri Kosina 99ce58ddc4 Merge branches 'upstream-fixes', 'wacom' and 'waltop' into for-linus
Conflicts:
	drivers/hid/hid-core.c
2012-05-22 11:35:11 +02:00
Jiri Kosina 56ccd186f1 Merge branch 'upstream' into for-linus
Conflicts:
	drivers/hid/hid-core.c
2012-05-22 11:32:31 +02:00
David Rientjes 4e52b538e3 HID: wacom: fix build breakage without CONFIG_LEDS_CLASS
CONFIG_HID_WACOM must depend on CONFIG_LEDS_CLASS, otherwise
CONFIG_NEW_LEDS may be disabled.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-21 15:27:47 +02:00
Przemo Firszt d13f5454e4 HID: wacom: Add LED selector control for Wacom Intuos4 WL
Add sysfs attribute to control LED selector on Wacom Intuos4. There are 4
different LEDs on the tablet and they can be turned on by something like:

echo 50 > /sys/class/leds/(device # here)\:selector\:1/brightness

Only one can be lit at a time. The brightness range is 0 to 127. This patch
also contains short ABI description.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-11 14:47:04 +02:00
Henrik Rydberg 8215d557e5 HID: Create a common generic driver
Move the hid drivers of the bus drivers to a common generic hid
driver, and make it a proper module. This ought to simplify device
handling moving forward.

Cc: Gustavo Padovan <gustavo@padovan.org>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-01 12:54:55 +02:00
Jiri Kosina 692d30d63b HID: add Kconfig text to HID_BATTERY_STRENGTH
HID_BATTERY_STRENGTH is missing both help text and description text.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-24 10:51:30 +02:00
Josh Boyer 2198edddd8 HID: default HID_BATTERY_STRENGTH to no
Commit 4f5ca836b "HID: hid-input: add support for HID devices reporting
Battery Strength" added the CONFIG_HID_BATTERY_STRENGTH option to report
the battery strength of HID devices.  The commit log explicitly mentions
it not working properly with recent userspace, but it is default y
anyway.  This is rather odd, and actually causes problems on real
systems.

This works around Fedora bug
https://bugzilla.redhat.com/show_bug.cgi?id=806295

Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-19 14:16:43 +02:00
Masanari Iida 6b2aac42b2 Fix typo in various Kconfig file
Correct spelling typo in various Kconfig file.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-16 14:40:08 +02:00
Josenivaldo Benito Junior 212da74da7 HID: Aureal Remote Control Device Driver
Devices like Aureal Cy se W-01RN USB_V3.1 and some derived hardware
have a bogus HID Report Descriptor. According to that report descriptor,
the maximum logical value for key events is 1 and not 101 (101 keys).

This quirk fixes this wrong Report Descriptor.

Signed-off-by: Josenivaldo Benito Junior <jrbenito@benito.qsl.br>
Signed-off-by: Franco Catrin <fcatrin@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-13 18:15:57 +02:00
Przemo Firszt cfb7563bca HID: wacom: Fix HID_WACOM self-dependency
This patch fixes a silly mistake: HID_WACOM was dependent on HID_WACOM, so
the option wasn't showing up after make menuconfig

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-29 16:40:15 +02:00
Przemo Firszt 7e551abbc8 HID: wacom: Change HID_WACOM option description.
Trivial patch: now the hid-wacom driver supports also Intuos4 WL tablet.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-28 10:23:07 +02:00
Przemo Firszt 224b321b31 HID: wacom: Remove CONFIG_HID_WACOM_POWER_SUPPLY option
This option was ment as a safety mechanism in case the system treats the wacom
tablet battery as the main power supply. It's no longer required as now we can
distinguish between system power supply and device power supply.

Signed-off-by: Przemo Firszt <przemo@firszt.eu>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-28 10:22:56 +02:00
Jiri Kosina 4a247a4119 Merge branch 'upstream' into for-linus
Conflicts:
	drivers/hid/Makefile
2012-03-20 13:18:05 +01:00
Jiri Kosina 77aa8e65f0 Merge branches 'roccat' and 'wacom' into for-linus 2012-03-20 13:05:18 +01:00
Jiri Kosina 740363fb75 HID: tivo: add support for BT-version (0x1200)
Add support for BT-driven configuration of the TiVo remote.

Reported-by: Joshua Dillon <jvdillon@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-13 09:36:05 +01:00
Nikolai Kondrashov 22ca20b250 HID: kye: Add support for 3 tablets
Add support for three KYE tablets: EasyPen i405X, MousePen i608X, EasyPen M610X.
Update Kconfig entry accordingly, remove EXPERT dependency.

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-28 13:37:12 +01:00
Andreas Hübner 1e93674a8e HID: add new driver for non-compliant Saitek devices
The driver currently only supports the PS1000 controller.
It fixes the report descriptor by removing a non-existing axis and
clearing the constant bit on the d-pad and button input reports.

Signed-off-by: Andreas Hübner <andreas@k4n.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-22 11:30:17 +01:00
Konstantin Khlebnikov 0944e964b2 HID: use generic driver for Logitech Unifying receivers if !CONFIG_HID_LOGITECH_DJ
Before commit 534a7b8e1 ("HID: Add full support for Logitech Unifying
receivers") Logitech Unifying receiver can work as generic device
without special driver, after that commit these devices does not works
without special driver.

After this patch they will use generic driver if special driver is disabled.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-21 16:00:31 +01:00
Denis Kovalev 2258e863b4 HID: multitouch: add support of Panasonic multitouch panels
While at it, also fix some minor codingstyle issues.

Signed-off-by: Denis Kovalev <Denis.Kovalev@dataart.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-21 11:55:45 +01:00
Jiri Kosina 2701eaabd7 HID: tivo: fix broken build
Fix mismatch between Kconfig name and Makefile expectation.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-06 17:36:38 +01:00
Jarod Wilson 44ea35c138 HID: add support for tivo slide remote
This patch finishes off adding full support for the TiVo Slide remote,
which is a mostly pure HID device from the perspective of the kernel.
There are a few mappings that use a vendor-specific usage page, and a
few keys in the consumer usage page that I think make sense to remap
slightly, to better fit their key labels' intended use. Doing this in a
stand-alone hid-tivo.c makes the modifications only matter for this
specific device.

What's actually connected to the computer is a Broadcom-made usb dongle,
which has an embedded hub, bluetooth adapter, mouse and keyboard
devices. You pair with the dongle, then the remote sends data that its
converted into HID on the keyboard interface (the mouse interface
doesn't do anything interesting, so far as I can tell).

lsusb for this device:
Bus 004 Device 005: ID 0a5c:2190 Broadcom Corp.
Bus 004 Device 004: ID 0a5c:4503 Broadcom Corp.
Bus 004 Device 003: ID 150a:1201
Bus 004 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)

Speaking of the keyboard interface, the remote actually does contain a
keyboard as well. The top slides away, revealing a reasonably functional
qwerty keyboard (not unlike many slide cell phones), thus the product
name.

CC: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-06 17:35:03 +01:00
Benjamin Tissoires 847672cd14 HID: multitouch: support Perixx PERIPAD 701
Perixx Peripad 701 is an hybrid device which presents a touchpad and
a keyboard on the same surface. The switch between the two is controlled
by a physical switch, and the firmware sends the events on the right
interface (mouse, keyboard or multitouch).
This patch enables the multitouch interface of this device to work.

We need to manually set the device as a trackpad (we cannot infer it
from the reports descriptors as the device works under Windows, a system
that does not allow multitouch touchpad).
We also need to set the hid feature MAX CONTACT NUMBER to 2 or the device
stops sending events once it has been pressed by two touches.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-06 13:22:39 +01:00
Stefan Achatz bd393dbd33 HID: roccat: Only one Kconfig entry for all roccat drivers
To cleanup Kconfig space and ease selection for users there is now
a single entry that selects all roccat related drivers at once.

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-02-05 17:22:40 +01:00
Jiri Kosina e027372856 Merge branches 'hyperv', 'multitouch', 'roccat', 'upstream', 'upstream-fixes', 'wacom' and 'wiimote' into for-linus 2012-01-05 15:51:02 +01:00
Masatoshi Hoshikawa 11576c6114 HID: hid-multitouch: add support 9 new Xiroku devices
This patch adds support for the Xiroku Inc. panels (SPX/MPX/CSR/etc.).

Signed-off-by: Masatoshi Hoshikawa <hoshikawa@xiroku.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-05 15:49:21 +01:00
Benjamin Tissoires b105712469 HID: multitouch: add support of Atmel multitouch panels
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-01-02 11:10:36 +01:00
Jiri Kosina d66c266ad4 HID: Kconfig: fix syntax
Replace mistakenly used '==' by '='.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-19 09:16:29 +01:00
Jiri Kosina 7e69ba7cae HID: introduce proper dependency of HID_BATTERY on POWER_SUPPLY
ppc6xx_defconfig reveals this:

drivers/built-in.o: In function `hidinput_cleanup_battery': drivers/hid/hid-input.c:351: undefined reference to`power_supply_unregister'
drivers/built-in.o: In function `hidinput_setup_battery': drivers/hid/hid-input.c:338: undefined reference to `power_supply_register'
make[1]: *** [.tmp_vmlinux1] Error 1

The defconfig in question doens't mention either option and kbuild is
genertaing

	CONFIG_HID_BATTERY_STRENGTH=y
	CONFIG_POWER_SUPPLY=m

which is wrong. Put a proper dependency in place.

Reported-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-16 23:35:55 +01:00
Aaron Tian b7ea95ff9b HID: multitouch: support PixArt optical touch screen
This patch modifies hid-multitouch driver for supporting PixArt optical touch
screen.  Because of the device does not have to set initial report, we apply
"HID_QUIRK_NO_INIT_REPORTS" quirk and add the device into hid_blacklist[]

Signed-off-by: Aaron Tian <aaron_tian@pixart.com.tw>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-15 11:13:41 +01:00
David Herrmann ef6f41157f HID: wiimote: Select INPUT_FF_MEMLESS
We depend on memless force-feedback support, therefore correctly select the
related config options.

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Cc: stable@kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-12 00:27:21 +01:00
Stefan Achatz d41c2a7011 HID: roccat: Add support for Isku keyboard
This patch adds support for Roccat Isku keyboard.
Userland tools can be found at http://sourceforge.net/projects/roccat

Signed-off-by: Stefan Achatz <erazor_de@users.sourceforge.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-12-06 10:21:10 +01:00
Benjamin Tissoires 5e7ea11f60 HID: multitouch: merge quanta driver into hid-multitouch
This patch merge the last old-style hid multitouch driver to
the generic one.
It also adds 2 more quanta pids.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-30 15:32:18 +01:00
Jeremy Fitzhardinge 4f5ca836be HID: hid-input: add support for HID devices reporting Battery Strength
Some HID devices, such as my Bluetooth mouse, report their battery
strength as an event.  Rather than passing it through as a strange
absolute input event, this patch registers it with the power_supply
subsystem as a battery, so that the device's Battery Strength can be
reported to usermode.

The battery appears in sysfs names
/sys/class/power_supply/hid-<UNIQ>-battery, and it is a child of the
battery-containing device, so it should be clear what it's the battery of.

Unfortunately on my current Fedora 16 system, while the battery does
appear in the UI, it is listed as a Laptop Battery with 0% charge (since
it ignores the "capacity" property of the battery and instead computes
it from the "energy*" fields, which we can't supply given the limited
information contained within the HID Report).

Still, this patch is the first step.

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-28 11:10:22 +01:00
David Herrmann cb99221ba7 HID: wiimote: Add extension support stub
The wiimote supports several extensions. This adds a separate source file which
handles all extensions and can be disabled at compile-time.

The driver reacts on "plug"-events on the extension port and starts a worker
which initializes or deinitializes the extensions.

Currently, the initialization logic is not fully understood and we can only
detect and enable all extensions when all extensions are deactivated. Therefore,
we need to disable all extensions, then detect and activate them again to react
on "plug"-events.
However, deactivating extensions will generate a new "plug"-event and we will
never leave that loop. Hence, we only support extensions if they are plugged
before the wiimote is connected (or before the ext-input device is opened). In
the future we may support full extension hotplug support, but
reverse-engineering this may take a while.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-22 23:08:28 +01:00
Jiri Kosina 6cf851d803 HID: hyperv: fixup Kconfig / Makefile entries
Rename the Kconfig entry for hyperv mouse driver so that it has
HID_ prefix as all the other drivers; while at it, place the entry
for this driver to properly ordered place in Makefile and Kconfig.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-22 22:52:15 +01:00
K. Y. Srinivasan b95f5bcb81 HID: Move the hid-hyperv driver out of staging
The file  hid-hyperv.c implements a hid compliant mouse driver for use on a
Hyper-V based system. This driver is currently in the staging area and as part
of the effort to move this driver out of staging, I had posted the driver code
for community review a few weeks ago. This current patch addresses all the
review comments I have gotten to date. All the relevant patches have already
been submitted to the staging tree as well.

As per Greg's suggestion, this patch does not get rid of the code from
the staging area. Once the mouse driver lands under the hid directory,
we will cleanup the staging directory.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-11-22 22:48:41 +01:00
Jiri Kosina b3aec7b686 Merge branch 'upstream' into for-linus
Conflicts:
	drivers/hid/hid-core.c
	drivers/hid/hid-ids.h
2011-10-25 09:59:04 +02:00
Jiri Kosina b0eae38ceb Merge branches 'acrux', 'logitech', 'multitouch', 'roccat' and 'wiimote' into for-linus 2011-10-25 09:54:16 +02:00
Sean Young 1bcc20675a HID: Add device IDs for more SJOY adapters
Support the following models: Super Joy Box 3 Pro, Super Dual Box Pro
and Super Joy Box 5 Pro. These models have support for pressure
sensitive buttons and they can force the controller to either digital
or analog mode, both of which are not supported yet.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-21 01:01:45 +02:00