Commit Graph

379 Commits

Author SHA1 Message Date
Andi Kleen 8bcb6c7d48 block: use lockdep_assert_held for queue locking
Instead of an ugly open coded variant.

Cc: axboe@kernel.dk
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-30 12:33:28 +02:00
Tejun Heo 11a3122f6c block: strip out locking optimization in put_io_context()
put_io_context() performed a complex trylock dancing to avoid
deferring ioc release to workqueue.  It was also broken on UP because
trylock was always assumed to succeed which resulted in unbalanced
preemption count.

While there are ways to fix the UP breakage, even the most
pathological microbench (forced ioc allocation and tight fork/exit
loop) fails to show any appreciable performance benefit of the
optimization.  Strip it out.  If there turns out to be workloads which
are affected by this change, simpler optimization from the discussion
thread can be applied later.

Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <1328514611.21268.66.camel@sli10-conroe>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-02-07 07:51:30 +01:00
Linus Torvalds b3c9dd182e Merge branch 'for-3.3/core' of git://git.kernel.dk/linux-block
* 'for-3.3/core' of git://git.kernel.dk/linux-block: (37 commits)
  Revert "block: recursive merge requests"
  block: Stop using macro stubs for the bio data integrity calls
  blockdev: convert some macros to static inlines
  fs: remove unneeded plug in mpage_readpages()
  block: Add BLKROTATIONAL ioctl
  block: Introduce blk_set_stacking_limits function
  block: remove WARN_ON_ONCE() in exit_io_context()
  block: an exiting task should be allowed to create io_context
  block: ioc_cgroup_changed() needs to be exported
  block: recursive merge requests
  block, cfq: fix empty queue crash caused by request merge
  block, cfq: move icq creation and rq->elv.icq association to block core
  block, cfq: restructure io_cq creation path for io_context interface cleanup
  block, cfq: move io_cq exit/release to blk-ioc.c
  block, cfq: move icq cache management to block core
  block, cfq: move io_cq lookup to blk-ioc.c
  block, cfq: move cfqd->icq_list to request_queue and add request->elv.icq
  block, cfq: reorganize cfq_io_context into generic and cfq specific parts
  block: remove elevator_queue->ops
  block: reorder elevator switch sequence
  ...

Fix up conflicts in:
 - block/blk-cgroup.c
	Switch from can_attach_task to can_attach
 - block/cfq-iosched.c
	conflict with now removed cic index changes (we now use q->id instead)
2012-01-15 12:24:45 -08:00
Paolo Bonzini 0bfc96cb77 block: fail SCSI passthrough ioctls on partition devices
Linux allows executing the SG_IO ioctl on a partition or LVM volume, and
will pass the command to the underlying block device.  This is
well-known, but it is also a large security problem when (via Unix
permissions, ACLs, SELinux or a combination thereof) a program or user
needs to be granted access only to part of the disk.

This patch lets partitions forward a small set of harmless ioctls;
others are logged with printk so that we can see which ioctls are
actually sent.  In my tests only CDROM_GET_CAPABILITY actually occurred.
Of course it was being sent to a (partition on a) hard disk, so it would
have failed with ENOTTY and the patch isn't changing anything in
practice.  Still, I'm treating it specially to avoid spamming the logs.

In principle, this restriction should include programs running with
CAP_SYS_RAWIO.  If for example I let a program access /dev/sda2 and
/dev/sdb, it still should not be able to read/write outside the
boundaries of /dev/sda2 independent of the capabilities.  However, for
now programs with CAP_SYS_RAWIO will still be allowed to send the
ioctls.  Their actions will still be logged.

This patch does not affect the non-libata IDE driver.  That driver
however already tests for bd != bd->bd_contains before issuing some
ioctl; it could be restricted further to forbid these ioctls even for
programs running with CAP_SYS_ADMIN/CAP_SYS_RAWIO.

Cc: linux-scsi@vger.kernel.org
Cc: Jens Axboe <axboe@kernel.dk>
Cc: James Bottomley <JBottomley@parallels.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[ Make it also print the command name when warning - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-14 15:07:24 -08:00
Paolo Bonzini 577ebb374c block: add and use scsi_blk_cmd_ioctl
Introduce a wrapper around scsi_cmd_ioctl that takes a block device.

The function will then be enhanced to detect partition block devices
and, in that case, subject the ioctls to whitelisting.

Cc: linux-scsi@vger.kernel.org
Cc: Jens Axboe <axboe@kernel.dk>
Cc: James Bottomley <JBottomley@parallels.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-14 15:07:24 -08:00
Stephen Rothwell fd83240a60 blockdev: convert some macros to static inlines
We prefer to program in C rather than preprocessor and it fixes this
warning when CONFIG_BLK_DEV_INTEGRITY is not set:

drivers/md/dm-table.c: In function 'dm_table_set_integrity':
drivers/md/dm-table.c:1285:3: warning: statement with no effect [-Wunused-value]

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-01-12 09:19:54 +01:00
Martin K. Petersen b1bd055d39 block: Introduce blk_set_stacking_limits function
Stacking driver queue limits are typically bounded exclusively by the
capabilities of the low level devices, not by the stacking driver
itself.

This patch introduces blk_set_stacking_limits() which has more liberal
metrics than the default queue limits function. This allows us to
inherit topology parameters from bottom devices without manually
tweaking the default limits in each driver prior to calling the stacking
function.

Since there is now a clear distinction between stacking and low-level
devices, blk_set_default_limits() has been modified to carry the more
conservative values that we used to manually set in
blk_queue_make_request().

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-01-11 16:27:11 +01:00
Tejun Heo a612fddf0d block, cfq: move cfqd->icq_list to request_queue and add request->elv.icq
Most of icq management is about to be moved out of cfq into blk-ioc.
This patch prepares for it.

* Move cfqd->icq_list to request_queue->icq_list

* Make request explicitly point to icq instead of through elevator
  private data.  ->elevator_private[3] is replaced with sub struct elv
  which contains icq pointer and priv[2].  cfq is updated accordingly.

* Meaningless clearing of ->elevator_private[0] removed from
  elv_set_request().  At that point in code, the field was guaranteed
  to be %NULL anyway.

This patch doesn't introduce any functional change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 00:33:41 +01:00
Tejun Heo b2efa05265 block, cfq: unlink cfq_io_context's immediately
cic is association between io_context and request_queue.  A cic is
linked from both ioc and q and should be destroyed when either one
goes away.  As ioc and q both have their own locks, locking becomes a
bit complex - both orders work for removal from one but not from the
other.

Currently, cfq tries to circumvent this locking order issue with RCU.
ioc->lock nests inside queue_lock but the radix tree and cic's are
also protected by RCU allowing either side to walk their lists without
grabbing lock.

This rather unconventional use of RCU quickly devolves into extremely
fragile convolution.  e.g. The following is from cfqd going away too
soon after ioc and q exits raced.

 general protection fault: 0000 [#1] PREEMPT SMP
 CPU 2
 Modules linked in:
 [   88.503444]
 Pid: 599, comm: hexdump Not tainted 3.1.0-rc10-work+ #158 Bochs Bochs
 RIP: 0010:[<ffffffff81397628>]  [<ffffffff81397628>] cfq_exit_single_io_context+0x58/0xf0
 ...
 Call Trace:
  [<ffffffff81395a4a>] call_for_each_cic+0x5a/0x90
  [<ffffffff81395ab5>] cfq_exit_io_context+0x15/0x20
  [<ffffffff81389130>] exit_io_context+0x100/0x140
  [<ffffffff81098a29>] do_exit+0x579/0x850
  [<ffffffff81098d5b>] do_group_exit+0x5b/0xd0
  [<ffffffff81098de7>] sys_exit_group+0x17/0x20
  [<ffffffff81b02f2b>] system_call_fastpath+0x16/0x1b

The only real hot path here is cic lookup during request
initialization and avoiding extra locking requires very confined use
of RCU.  This patch makes cic removal from both ioc and request_queue
perform double-locking and unlink immediately.

* From q side, the change is almost trivial as ioc->lock nests inside
  queue_lock.  It just needs to grab each ioc->lock as it walks
  cic_list and unlink it.

* From ioc side, it's a bit more difficult because of inversed lock
  order.  ioc needs its lock to walk its cic_list but can't grab the
  matching queue_lock and needs to perform unlock-relock dancing.

  Unlinking is now wholly done from put_io_context() and fast path is
  optimized by using the queue_lock the caller already holds, which is
  by far the most common case.  If the ioc accessed multiple devices,
  it tries with trylock.  In unlikely cases of fast path failure, it
  falls back to full double-locking dance from workqueue.

Double-locking isn't the prettiest thing in the world but it's *far*
simpler and more understandable than RCU trick without adding any
meaningful overhead.

This still leaves a lot of now unnecessary RCU logics.  Future patches
will trim them.

-v2: Vivek pointed out that cic->q was being dereferenced after
     cic->release() was called.  Updated to use local variable @this_q
     instead.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 00:33:39 +01:00
Tejun Heo 09ac46c429 block: misc updates to blk_get_queue()
* blk_get_queue() is peculiar in that it returns 0 on success and 1 on
  failure instead of 0 / -errno or boolean.  Update it such that it
  returns %true on success and %false on failure.

* Make sure the caller checks for the return value.

* Separate out __blk_get_queue() which doesn't check whether @q is
  dead and put it in blk.h.  This will be used later.

This patch doesn't introduce any functional changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 00:33:38 +01:00
Tejun Heo a73f730d01 block, cfq: move cfqd->cic_index to q->id
cfq allocates per-queue id using ida and uses it to index cic radix
tree from io_context.  Move it to q->id and allocate on queue init and
free on queue release.  This simplifies cfq a bit and will allow for
further improvements of io context life-cycle management.

This patch doesn't introduce any functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 00:33:37 +01:00
Tejun Heo 34f6055c80 block: add blk_queue_dead()
There are a number of QUEUE_FLAG_DEAD tests.  Add blk_queue_dead()
macro and use it.

This patch doesn't introduce any functional difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 00:33:37 +01:00
Tejun Heo 1ba64edef6 block, sx8: kill blk_insert_request()
The only user left for blk_insert_request() is sx8 and it can be
trivially switched to use blk_execute_rq_nowait() - special requests
aren't included in io stat and sx8 doesn't use block layer tagging.
Switch sx8 and kill blk_insert_requeset().

This patch doesn't introduce any functional difference.

Only compile tested.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-12-14 00:33:37 +01:00
Mike Snitzer 5151412dd4 block: initialize request_queue's numa node during
struct request_queue is allocated with __GFP_ZERO so its "node" field is
zero before initialization.  This causes an oops if node 0 is offline in
the page allocator because its zonelists are not initialized.  From Dave
Young's dmesg:

	SRAT: Node 1 PXM 2 0-d0000000
	SRAT: Node 1 PXM 2 100000000-330000000
	SRAT: Node 0 PXM 1 330000000-630000000
	Initmem setup node 1 0000000000000000-000000000affb000
	...
	Built 1 zonelists in Node order, mobility grouping on.
	...
	BUG: unable to handle kernel paging request at 0000000000001c08
	IP: [<ffffffff8111c355>] __alloc_pages_nodemask+0xb5/0x870

and __alloc_pages_nodemask+0xb5 translates to a NULL pointer on
zonelist->_zonerefs.

The fix is to initialize q->node at the time of allocation so the correct
node is passed to the slab allocator later.

Since blk_init_allocated_queue_node() is no longer needed, merge it with
blk_init_allocated_queue().

[rientjes@google.com: changelog, initializing q->node]
Cc: stable@vger.kernel.org [2.6.37+]
Reported-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Tested-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-23 10:59:13 +01:00
Linus Torvalds 32aaeffbd4 Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux
* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include <linux/module.h>
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include <linux/module.h>
  net: sch_generic remove redundant use of <linux/module.h>
  net: inet_timewait_sock doesnt need <linux/module.h>
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h
2011-11-06 19:44:47 -08:00
Paul Gortmaker de47725421 include: replace linux/module.h with "struct module" wherever possible
The <linux/module.h> pretty much brings in the kitchen sink along
with it, so it should be avoided wherever reasonably possible in
terms of being included from other commonly used <linux/something.h>
files, as it results in a measureable increase on compile times.

The worst culprit was probably device.h since it is used everywhere.
This file also had an implicit dependency/usage of mutex.h which was
masked by module.h, and is also fixed here at the same time.

There are over a dozen other headers that simply declare the
struct instead of pulling in the whole file, so follow their lead
and simply make it a few more.

Most of the implicit dependencies on module.h being present by
these headers pulling it in have been now weeded out, so we can
finally make this change with hopefully minimal breakage.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:32:32 -04:00
Tejun Heo bc9fcbf9cb block: move blk_throtl prototypes to block/blk.h
blk_throtl interface is block internal and there's no reason to have
them in linux/blkdev.h.  Move them to block/blk.h.

This patch doesn't introduce any functional change.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19 14:31:18 +02:00
Jens Axboe 5c04b426f2 Merge branch 'v3.1-rc10' into for-3.2/core
Conflicts:
	block/blk-core.c
	include/linux/blkdev.h

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-10-19 14:30:42 +02:00
Suresh Jayaraman 75df713627 block: document blk-plug
Thus spake Andrew Morton:

"And I have the usual maintainability whine.  If someone comes up to
vmscan.c and sees it calling blk_start_plug(), how are they supposed to
work out why that call is there?  They go look at the blk_start_plug()
definition and it is undocumented.  I think we can do better than this?"

Adapted from the LWN article - http://lwn.net/Articles/438256/ by Jens
Axboe and from an earlier attempt by Shaohua Li to document blk-plug.

[akpm@linux-foundation.org: grammatical and spelling tweaks]
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Cc: Shaohua Li <shaohua.li@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-09-21 10:00:16 +02:00
Christoph Hellwig 5a7bbad27a block: remove support for bio remapping from ->make_request
There is very little benefit in allowing to let a ->make_request
instance update the bios device and sector and loop around it in
__generic_make_request when we can archive the same through calling
generic_make_request from the driver and letting the loop in
generic_make_request handle it.

Note that various drivers got the return value from ->make_request and
returned non-zero values for errors.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-09-12 12:12:01 +02:00
Jens Axboe c20e8de27f block: rename __make_request() to blk_queue_bio()
Now that it's exported, lets put it in a more sane namespace.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-09-12 12:08:31 +02:00
Christoph Hellwig 166e1f901b block: export __make_request
Avoid the hacks need for request based device mappers currently by simply
exporting the symbol instead of trying to get it through the back door.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-09-12 12:08:27 +02:00
Shaohua Li 56ebdaf2fa block: simplify force plug flush code a little bit
Cleaning up the code a little bit. attempt_plug_merge() traverses the plug
list anyway, we can do the request counting there, so stack size is reduced
a little bit.
The motivation here is I suspect if we should count the requests for each
queue (task could handle multiple disks in the meantime), but my test doesn't
show it's worthy doing. If somebody proves we should do it, below change
will make that more easier.

Signed-off-by: Shaohua Li <shli@kernel.org>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-24 16:04:34 +02:00
Jeff Moyer 4853abaae7 block: fix flush machinery for stacking drivers with differring flush flags
Commit ae1b153962, block: reimplement
FLUSH/FUA to support merge, introduced a performance regression when
running any sort of fsyncing workload using dm-multipath and certain
storage (in our case, an HP EVA).  The test I ran was fs_mark, and it
dropped from ~800 files/sec on ext4 to ~100 files/sec.  It turns out
that dm-multipath always advertised flush+fua support, and passed
commands on down the stack, where those flags used to get stripped off.
The above commit changed that behavior:

static inline struct request *__elv_next_request(struct request_queue *q)
{
        struct request *rq;

        while (1) {
-               while (!list_empty(&q->queue_head)) {
+               if (!list_empty(&q->queue_head)) {
                        rq = list_entry_rq(q->queue_head.next);
-                       if (!(rq->cmd_flags & (REQ_FLUSH | REQ_FUA)) ||
-                           (rq->cmd_flags & REQ_FLUSH_SEQ))
-                               return rq;
-                       rq = blk_do_flush(q, rq);
-                       if (rq)
-                               return rq;
+                       return rq;
                }

Note that previously, a command would come in here, have
REQ_FLUSH|REQ_FUA set, and then get handed off to blk_do_flush:

struct request *blk_do_flush(struct request_queue *q, struct request *rq)
{
        unsigned int fflags = q->flush_flags; /* may change, cache it */
        bool has_flush = fflags & REQ_FLUSH, has_fua = fflags & REQ_FUA;
        bool do_preflush = has_flush && (rq->cmd_flags & REQ_FLUSH);
        bool do_postflush = has_flush && !has_fua && (rq->cmd_flags &
        REQ_FUA);
        unsigned skip = 0;
...
        if (blk_rq_sectors(rq) && !do_preflush && !do_postflush) {
                rq->cmd_flags &= ~REQ_FLUSH;
		if (!has_fua)
			rq->cmd_flags &= ~REQ_FUA;
	        return rq;
	}

So, the flush machinery was bypassed in such cases (q->flush_flags == 0
&& rq->cmd_flags & (REQ_FLUSH|REQ_FUA)).

Now, however, we don't get into the flush machinery at all.  Instead,
__elv_next_request just hands a request with flush and fua bits set to
the scsi_request_fn, even if the underlying request_queue does not
support flush or fua.

The agreed upon approach is to fix the flush machinery to allow
stacking.  While this isn't used in practice (since there is only one
request-based dm target, and that target will now reflect the flush
flags of the underlying device), it does future-proof the solution, and
make it function as designed.

In order to make this work, I had to add a field to the struct request,
inside the flush structure (to store the original req->end_io).  Shaohua
had suggested overloading the union with rb_node and completion_data,
but the completion data is used by device mapper and can also be used by
other drivers.  So, I didn't see a way around the additional field.

I tested this patch on an HP EVA with both ext4 and xfs, and it recovers
the lost performance.  Comments and other testers, as always, are
appreciated.

Cheers,
Jeff

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-15 21:37:25 +02:00
Mike Christie aa387cc895 block: add bsg helper library
This moves the FC classes bsg code to the block layer and
makes it a lib so that other classes like iscsi and SAS can use it.

It is helpful because working with the request queue, bios,
creating scatterlists, etc are a pain that the LLD does not
have to worry about with normal IOs and should not have to
worry about for bsg requests.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-31 22:05:09 +02:00
Dan Williams 5757a6d76c block: strict rq_affinity
Some systems benefit from completions always being steered to the strict
requester cpu rather than the looser "per-socket" steering that
blk_cpu_to_group() attempts by default. This is because the first
CPU in the group mask ends up being completely overloaded with work,
while the others (including the original submitter) has power left
to spare.

Allow the strict mode to be set by writing '2' to the sysfs control
file. This is identical to the scheme used for the nomerges file,
where '2' is a more aggressive setting than just being turned on.

echo 2 > /sys/block/<bdev>/queue/rq_affinity

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Roland Dreier <roland@purestorage.com>
Tested-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-23 20:44:25 +02:00
Richard Kennedy d7b7630130 block: reorder request_queue to remove 64 bit alignment padding
Reorder request_queue to remove 16 bytes of alignment padding in 64 bit
builds.

On my config this shrinks the size of this structure from 1608 to 1592
bytes and therefore needs one fewer cachelines.

Also trivially move the open bracket { to be on the same line as the
structure name to make it easier to grep.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-13 21:17:49 +02:00
Shaohua Li 316cc67d5e block: document blk_plug list access
I'm often confused why not disable preempt when changing blk_plug list. It
would be better to add comments here in case others have the similar concerns.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-08 08:19:21 +02:00
Shaohua Li 55c022bbdd block: avoid building too big plug list
When I test fio script with big I/O depth, I found the total throughput drops
compared to some relative small I/O depth. The reason is the thread accumulates
big requests in its plug list and causes some delays (surely this depends
on CPU speed).
I thought we'd better have a threshold for requests. When a threshold reaches,
this means there is no request merge and queue lock contention isn't severe
when pushing per-task requests to queue, so the main advantages of blk plug
don't exist. We can force a plug list flush in this case.
With this, my test throughput actually increases and almost equals to small
I/O depth. Another side effect is irq off time decreases in blk_flush_plug_list()
for big I/O depth.
The BLK_MAX_REQUEST_COUNT is choosen arbitarily, but 16 is efficiently to
reduce lock contention to me. But I'm open here, 32 is ok in my test too.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-08 08:19:20 +02:00
Jens Axboe 04bf7869ca Merge branch 'for-linus' into for-3.1/core
Conflicts:
	block/blk-throttle.c
	block/cfq-iosched.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-07-01 16:17:13 +02:00
Wanlong Gao 4d0d98b60e block:fix the comment error in blkdev.h
There is not a function rq_init but blk_rq_init in block/blk-core.c.

Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-06-13 10:45:38 +02:00
Namhyung Kim ea9d6553b3 block: remove unwanted semicolons
Since those defined functions require additional semicolon
from the caller, they could cause potential syntax errors
when used in if-else statements.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-31 13:45:53 +02:00
Jens Axboe 698567f3fa Merge commit 'v2.6.39' into for-2.6.40/core
Since for-2.6.40/core was forked off the 2.6.39 devel tree, we've
had churn in the core area that makes it difficult to handle
patches for eg cfq or blk-throttle. Instead of requiring that they
be based in older versions with bugs that have been fixed later
in the rc cycle, merge in 2.6.39 final.

Also fixes up conflicts in the below files.

Conflicts:
	drivers/block/paride/pcd.c
	drivers/cdrom/viocd.c
	drivers/ide/ide-cd.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-20 20:33:15 +02:00
Martin K. Petersen a934a00a69 block: Fix discard topology stacking and reporting
In some cases we would end up stacking discard_zeroes_data incorrectly.
Fix this by enabling the feature by default for stacking drivers and
clearing it for low-level drivers. Incorporating a device that does not
support dzd will then cause the feature to be disabled in the stacking
driver.

Also ensure that the maximum discard value does not overflow when
exported in sysfs and return 0 in the alignment and dzd fields for
devices that don't support discard.

Reported-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-18 10:37:35 +02:00
shaohua.li@intel.com 3ac0cc4508 block: hold queue if flush is running for non-queueable flush drive
In some drives, flush requests are non-queueable. When flush request is
running, normal read/write requests can't run. If block layer dispatches
such request, driver can't handle it and requeue it.  Tejun suggested we
can hold the queue when flush is running. This can avoid unnecessary
requeue.  Also this can improve performance. For example, we have
request flush1, write1, flush 2. flush1 is dispatched, then queue is
hold, write1 isn't inserted to queue. After flush1 is finished, flush2
will be dispatched. Since disk cache is already clean, flush2 will be
finished very soon, so looks like flush2 is folded to flush1.

In my test, the queue holding completely solves a regression introduced by
commit 53d63e6b0dfb95882ec0219ba6bbd50cde423794:

    block: make the flush insertion use the tail of the dispatch list

    It's not a preempt type request, in fact we have to insert it
    behind requests that do specify INSERT_FRONT.

which causes about 20% regression running a sysbench fileio
workload.

Stable: 2.6.39 only

Cc: stable@kernel.org
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 11:36:25 -06:00
shaohua.li@intel.com f387693095 block: add a non-queueable flush flag
flush request isn't queueable in some drives. Add a flag to let driver
notify block layer about this. We can optimize flush performance with the
knowledge.

Stable: 2.6.39 only

Cc: stable@kernel.org
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-06 11:36:25 -06:00
Jens Axboe c21e6beba8 block: get rid of QUEUE_FLAG_REENTER
We are currently using this flag to check whether it's safe
to call into ->request_fn(). If it is set, we punt to kblockd.
But we get a lot of false positives and excessive punts to
kblockd, which hurts performance.

The only real abuser of this infrastructure is SCSI. So export
the async queue run and convert SCSI over to use that. There's
room for improvement in that SCSI need not always use the async
call, but this fixes our performance issue and they can fix that
up in due time.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-19 13:32:46 +02:00
Christoph Hellwig 24ecfbe27f block: add blk_run_queue_async
Instead of overloading __blk_run_queue to force an offload to kblockd
add a new blk_run_queue_async helper to do it explicitly.  I've kept
the blk_queue_stopped check for now, but I suspect it's not needed
as the check we do when the workqueue items runs should be enough.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-18 11:41:33 +02:00
Jens Axboe b4cb290e0a Revert "block: add callback function for unplug notification"
MD can't use this since it really requires us to be able to
keep more than a single piece of state for the unplug. Commit
048c9374 added the required support for MD, so get rid of this
now unused code.

This reverts commit f75664570d.

Conflicts:

	block/blk-core.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-18 09:54:05 +02:00
NeilBrown 048c9374a7 block: Enhance new plugging support to support general callbacks
md/raid requires an unplug callback, but as it does not uses
requests the current code cannot provide one.

So allow arbitrary callbacks to be attached to the blk_plug.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-18 09:52:22 +02:00
Jens Axboe a237c1c5bc block: let io_schedule() flush the plug inline
Linus correctly observes that the most important dispatch cases
are now done from kblockd, this isn't ideal for latency reasons.
The original reason for switching dispatches out-of-line was to
avoid too deep a stack, so by _only_ letting the "accidental"
flush directly in schedule() be guarded by offload to kblockd,
we should be able to get the best of both worlds.

So add a blk_schedule_flush_plug() that offloads to kblockd,
and only use that from the schedule() path.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-16 13:27:55 +02:00
Jens Axboe f6603783f9 block: only force kblockd unplugging from the schedule() path
For the explicit unplugging, we'd prefer to kick things off
immediately and not pay the penalty of the latency to switch
to kblockd. So let blk_finish_plug() do the run inline, while
the implicit-on-schedule-out unplug will punt to kblockd.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-15 15:49:07 +02:00
Christoph Hellwig 88b996cd06 block: cleanup the block plug helper functions
It's a bit of a mess currently. task->plug is being cleared
and reset in __blk_finish_plug(), and blk_finish_plug() is
testing for a NULL plug which cannot happen even from schedule()
anymore since it uses blk_needs_flush_plug() to determine
whether to call into this function at all.

So get rid of some of the cruft.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-15 15:20:10 +02:00
Jens Axboe f75664570d block: add callback function for unplug notification
MD would like to know when a queue is unplugged, so it can flush
it's bitmap writes. Add such a callback.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-12 10:17:31 +02:00
Mike Snitzer a63a5cf84d dm: improve block integrity support
The current block integrity (DIF/DIX) support in DM is verifying that
all devices' integrity profiles match during DM device resume (which
is past the point of no return).  To some degree that is unavoidable
(stacked DM devices force this late checking).  But for most DM
devices (which aren't stacking on other DM devices) the ideal time to
verify all integrity profiles match is during table load.

Introduce the notion of an "initialized" integrity profile: a profile
that was blk_integrity_register()'d with a non-NULL 'blk_integrity'
template.  Add blk_integrity_is_initialized() to allow checking if a
profile was initialized.

Update DM integrity support to:
- check all devices with _initialized_ integrity profiles match
  during table load; uninitialized profiles (e.g. for underlying DM
  device(s) of a stacked DM device) are ignored.
- disallow a table load that would result in an integrity profile that
  conflicts with a DM device's existing (in-use) integrity profile
- avoid clearing an existing integrity profile
- validate all integrity profiles match during resume; but if they
  don't all we can do is report the mismatch (during resume we're past
  the point of no return)

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-04-05 23:52:43 +02:00
Jens Axboe 1f940bdfc0 block: fixup plugging stubs for !CONFIG_BLOCK
They used an older prototype, fix it up.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-11 20:17:08 +01:00
Jens Axboe 4c63f5646e Merge branch 'for-2.6.39/stack-plug' into for-2.6.39/core
Conflicts:
	block/blk-core.c
	block/blk-flush.c
	drivers/md/raid1.c
	drivers/md/raid10.c
	drivers/md/raid5.c
	fs/nilfs2/btnode.c
	fs/nilfs2/mdt.c

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:58:35 +01:00
Jens Axboe 7eaceaccab block: remove per-queue plugging
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:52:07 +01:00
Jens Axboe 73c1010119 block: initial patch for on-stack per-task plugging
This patch adds support for creating a queuing context outside
of the queue itself. This enables us to batch up pieces of IO
before grabbing the block device queue lock and submitting them to
the IO scheduler.

The context is created on the stack of the process and assigned in
the task structure, so that we can auto-unplug it if we hit a schedule
event.

The current queue plugging happens implicitly if IO is submitted to
an empty device, yet callers have to remember to unplug that IO when
they are going to wait for it. This is an ugly API and has caused bugs
in the past. Additionally, it requires hacks in the vm (->sync_page()
callback) to handle that logic. By switching to an explicit plugging
scheme we make the API a lot nicer and can get rid of the ->sync_page()
hack in the vm.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:45:54 +01:00
Jens Axboe 3cca6dc1c8 block: add API for delaying work/request_fn a little bit
Currently we use plugging for that, but as plugging is going away,
we need an alternative mechanism.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-03-10 08:45:54 +01:00