This adds basic building blocks required for ID_PFR2 CPU register which
provides information about the AArch32 programmers model which must be
interpreted along with ID_PFR0 and ID_PFR1 CPU registers. This is added
per ARM DDI 0487F.a specification.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1589881254-10082-5-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Double lock feature can have the following possible values.
0b0000 - Double lock implemented
0b1111 - Double lock not implemented
But in case of a conflict the safe value should be 0b1111. Hence this must
be a signed feature instead. Also change FTR_EXACT to FTR_LOWER_SAFE. While
here, fix the erroneous bit width value from 28 to 4.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1589881254-10082-4-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
ID_DFR0 based TraceFilt feature should not be exposed to guests. Hence lets
drop it.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1589881254-10082-3-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
ID_ISAR0[31..28] bits are RES0 in ARMv8, Reserved/UNK in ARMv7. Currently
these bits get exposed through generic_id_ftr32[] which is not desirable.
Hence define an explicit ftr_id_isar0[] array for ID_ISAR0 register where
those bits can be hidden.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1589881254-10082-2-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Currently there are multiple instances of parange feature width mask open
encodings while fetching it's value. Even the width mask value (0x7) itself
is not accurate. It should be (0xf) per ID_AA64MMFR0_EL1.PARange[3:0] as in
ARM ARM (0487F.a). Replace them with cpuid_feature_extract_unsigned_field()
which can extract given standard feature (4 bits width i.e 0xf mask) field.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/1589360614-1164-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
This validates hypervisor capabilities like VMID width, IPA range for any
hot plug CPU against system finalized values. KVM's view of the IPA space
is used while allowing a given CPU to come up. While here, it factors out
get_vmid_bits() for general use.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: kvmarm@lists.cs.columbia.edu
Cc: linux-kernel@vger.kernel.org
Suggested-by: Suzuki Poulose <suzuki.poulose@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1589248647-22925-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
When a feature register field is omitted from the description of the
register, the corresponding bits are treated as STRICT RES0, including
for KVM guests. This is subtly different to declaring the field as
HIDDEN/STRICT/EXACT/0, so update the comment to call this out.
Signed-off-by: Will Deacon <will@kernel.org>
Now that Suzuki isn't within throwing distance, I thought I'd better add
a rough overview comment to cpufeature.c so that it doesn't take me days
to remember how it works next time.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20200421142922.18950-9-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
We don't need to be quite as strict about mismatched AArch32 support,
which is good because the friendly hardware folks have been busy
mismatching this to their hearts' content.
* We don't care about EL2 or EL3 (there are silly comments concerning
the latter, so remove those)
* EL1 support is gated by the ARM64_HAS_32BIT_EL1 capability and handled
gracefully when a mismatch occurs
* EL0 support is gated by the ARM64_HAS_32BIT_EL0 capability and handled
gracefully when a mismatch occurs
Relax the AArch32 checks to FTR_NONSTRICT.
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20200421142922.18950-8-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
If AArch32 is not supported at EL1, the AArch32 feature register fields
no longer advertise support for some system features:
* ISAR4.SMC
* PFR1.{Virt_frac, Sec_frac, Virtualization, Security, ProgMod}
In which case, we don't need to emit "SANITY CHECK" failures for all of
them.
Add logic to relax the strictness of individual feature register fields
at runtime and use this for the fields above if 32-bit EL1 is not
supported.
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20200421142922.18950-7-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
update_cpu_features() is pretty large, so split out the checking of the
AArch32 features into a separate function and call it after checking the
AArch64 features.
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20200421142922.18950-6-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
There's no need to call id_aa64pfr0_32bit_el0() twice because the
sanitised value of ID_AA64PFR0_EL1 has already been updated for the CPU
being onlined.
Remove the redundant function call.
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20200421142922.18950-5-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Although we emit a "SANITY CHECK" warning and taint the kernel if we
detect a CPU mismatch for AArch32 support at EL1, we still online the
CPU with disastrous consequences for any running 32-bit VMs.
Introduce a capability for AArch32 support at EL1 so that late onlining
of incompatible CPUs is forbidden.
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200421142922.18950-4-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
In preparation for runtime updates to the strictness of some AArch32
features, spell out the register fields for ID_ISAR4 and ID_PFR1 to make
things clearer to read. Note that this isn't functionally necessary, as
the feature arrays themselves are not modified dynamically and remain
'const'.
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20200421142922.18950-3-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
We don't care if IESB is supported or not as we always set
SCTLR_ELx.IESB and, if it works, that's really great.
Relax the ID_AA64MMFR2.IESB cpufeature check so that we don't warn and
taint if it's mismatched.
[will: rewrote commit message]
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20200421142922.18950-2-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
* for-next/memory-hotremove:
: Memory hot-remove support for arm64
arm64/mm: Enable memory hot remove
arm64/mm: Hold memory hotplug lock while walking for kernel page table dump
* for-next/arm_sdei:
: SDEI: fix double locking on return from hibernate and clean-up
firmware: arm_sdei: clean up sdei_event_create()
firmware: arm_sdei: Use cpus_read_lock() to avoid races with cpuhp
firmware: arm_sdei: fix possible double-lock on hibernate error path
firmware: arm_sdei: fix double-lock on hibernate with shared events
* for-next/amu:
: ARMv8.4 Activity Monitors support
clocksource/drivers/arm_arch_timer: validate arch_timer_rate
arm64: use activity monitors for frequency invariance
cpufreq: add function to get the hardware max frequency
Documentation: arm64: document support for the AMU extension
arm64/kvm: disable access to AMU registers from kvm guests
arm64: trap to EL1 accesses to AMU counters from EL0
arm64: add support for the AMU extension v1
* for-next/final-cap-helper:
: Introduce cpus_have_final_cap_helper(), migrate arm64 KVM to it
arm64: kvm: hyp: use cpus_have_final_cap()
arm64: cpufeature: add cpus_have_final_cap()
* for-next/cpu_ops-cleanup:
: cpu_ops[] access code clean-up
arm64: Introduce get_cpu_ops() helper function
arm64: Rename cpu_read_ops() to init_cpu_ops()
arm64: Declare ACPI parking protocol CPU operation if needed
* for-next/misc:
: Various fixes and clean-ups
arm64: define __alloc_zeroed_user_highpage
arm64/kernel: Simplify __cpu_up() by bailing out early
arm64: remove redundant blank for '=' operator
arm64: kexec_file: Fixed code style.
arm64: add blank after 'if'
arm64: fix spelling mistake "ca not" -> "cannot"
arm64: entry: unmask IRQ in el0_sp()
arm64: efi: add efi-entry.o to targets instead of extra-$(CONFIG_EFI)
arm64: csum: Optimise IPv6 header checksum
arch/arm64: fix typo in a comment
arm64: remove gratuitious/stray .ltorg stanzas
arm64: Update comment for ASID() macro
arm64: mm: convert cpu_do_switch_mm() to C
arm64: fix NUMA Kconfig typos
* for-next/perf:
: arm64 perf updates
arm64: perf: Add support for ARMv8.5-PMU 64-bit counters
KVM: arm64: limit PMU version to PMUv3 for ARMv8.1
arm64: cpufeature: Extract capped perfmon fields
arm64: perf: Clean up enable/disable calls
perf: arm-ccn: Use scnprintf() for robustness
arm64: perf: Support new DT compatibles
arm64: perf: Refactor PMU init callbacks
perf: arm_spe: Remove unnecessary zero check on 'nr_pages'
When the kernel is compiled with pointer auth instructions, the boot CPU
needs to start using address auth very early, so change the cpucap to
account for this.
Pointer auth must be enabled before we call C functions, because it is
not possible to enter a function with pointer auth disabled and exit it
with pointer auth enabled. Note, mismatches between architected and
IMPDEF algorithms will still be caught by the cpufeature framework (the
separate *_ARCH and *_IMP_DEF cpucaps).
Note the change in behavior: if the boot CPU has address auth and a
late CPU does not, then the late CPU is parked by the cpufeature
framework. This is possible as kernel will only have NOP space intructions
for PAC so such mismatched late cpu will silently ignore those
instructions in C functions. Also, if the boot CPU does not have address
auth and the late CPU has then the late cpu will still boot but with
ptrauth feature disabled.
Leave generic authentication as a "system scope" cpucap for now, since
initially the kernel will only use address authentication.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
[Amit: Re-worked ptrauth setup logic, comments]
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Each system capability can be of either boot, local, or system scope,
depending on when the state of the capability is finalized. When we
detect a conflict on a late CPU, we either offline the CPU or panic the
system. We currently always panic if the conflict is caused by a boot
scope capability, and offline the CPU if the conflict is caused by a
local or system scope capability.
We're going to want to add a new capability (for pointer authentication)
which needs to be boot scope but doesn't need to panic the system when a
conflict is detected. So add a new flag to specify whether the
capability requires the system to panic or not. Current boot scope
capabilities are updated to set the flag, so there should be no
functional change as a result of this patch.
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
These helpers are used only by functions inside cpufeature.c and
hence makes sense to be moved from cpufeature.h to cpufeature.c as
they are not expected to be used globally.
This change helps in reducing the header file size as well as to add
future cpu capability types without confusion. Only a cpu capability
type macro is sufficient to expose those capabilities globally.
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
To enable pointer auth for the kernel, we're going to need to check for
the presence of address auth and generic auth using alternative_if. We
currently have two cpucaps for each, but alternative_if needs to check a
single cpucap. So define meta-capabilities that are present when either
of the current two capabilities is present.
Leave the existing four cpucaps in place, as they are still needed to
check for mismatched systems where one CPU has the architected algorithm
but another has the IMP DEF algorithm.
Note, the meta-capabilities were present before but were removed in
commit a56005d321 ("arm64: cpufeature: Reduce number of pointer auth
CPU caps from 6 to 4") and commit 1e013d0612 ("arm64: cpufeature: Rework
ptr auth hwcaps using multi_entry_cap_matches"), as they were not needed
then. Note, unlike before, the current patch checks the cpucap values
directly, instead of reading the CPU ID register value.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
[Amit: commit message and macro rebase, use __system_matches_cap]
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Some existing/future meta cpucaps match need the presence of individual
cpucaps. Currently the individual cpucaps checks it via an array based
flag and this introduces dependency on the array entry order.
This limitation exists only for system scope cpufeature.
This patch introduces an internal helper function (__system_matches_cap)
to invoke the matching handler for system scope. This helper has to be
used during a narrow window when,
- The system wide safe registers are set with all the SMP CPUs and,
- The SYSTEM_FEATURE cpu_hwcaps may not have been set.
Normal users should use the existing cpus_have_{const_}cap() global
function.
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Reviewed-by: Vincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
remove redundant blank for '=' operator, it may be more elegant.
Signed-off-by: hankecai <hankecai@vivo.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The Frequency Invariance Engine (FIE) is providing a frequency
scaling correction factor that helps achieve more accurate
load-tracking.
So far, for arm and arm64 platforms, this scale factor has been
obtained based on the ratio between the current frequency and the
maximum supported frequency recorded by the cpufreq policy. The
setting of this scale factor is triggered from cpufreq drivers by
calling arch_set_freq_scale. The current frequency used in computation
is the frequency requested by a governor, but it may not be the
frequency that was implemented by the platform.
This correction factor can also be obtained using a core counter and a
constant counter to get information on the performance (frequency based
only) obtained in a period of time. This will more accurately reflect
the actual current frequency of the CPU, compared with the alternative
implementation that reflects the request of a performance level from
the OS.
Therefore, implement arch_scale_freq_tick to use activity monitors, if
present, for the computation of the frequency scale factor.
The use of AMU counters depends on:
- CONFIG_ARM64_AMU_EXTN - depents on the AMU extension being present
- CONFIG_CPU_FREQ - the current frequency obtained using counter
information is divided by the maximum frequency obtained from the
cpufreq policy.
While it is possible to have a combination of CPUs in the system with
and without support for activity monitors, the use of counters for
frequency invariance is only enabled for a CPU if all related CPUs
(CPUs in the same frequency domain) support and have enabled the core
and constant activity monitor counters. In this way, there is a clear
separation between the policies for which arch_set_freq_scale (cpufreq
based FIE) is used, and the policies for which arch_scale_freq_tick
(counter based FIE) is used to set the frequency scale factor. For
this purpose, a late_initcall_sync is registered to trigger validation
work for policies that will enable or disable the use of AMU counters
for frequency invariance. If CONFIG_CPU_FREQ is not defined, the use
of counters is enabled on all CPUs only if all possible CPUs correctly
support the necessary counters.
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The activity monitors extension is an optional extension introduced
by the ARMv8.4 CPU architecture. This implements basic support for
version 1 of the activity monitors architecture, AMUv1.
This support includes:
- Extension detection on each CPU (boot, secondary, hotplugged)
- Register interface for AMU aarch64 registers
Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Expose the ID_AA64ISAR0.RNDR field to userspace, as the RNG system
registers are always available at EL0.
Implement arch_get_random_seed_long using RNDR. Given that the
TRNG is likely to be a shared resource between cores, and VMs,
do not explicitly force re-seeding with RNDRRS. In order to avoid
code complexity and potential issues with hetrogenous systems only
provide values after cpufeature has finalized the system capabilities.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[Modified to only function after cpufeature has finalized the system
capabilities and move all the code into the header -- broonie]
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
[will: Advertise HWCAP via /proc/cpuinfo]
Signed-off-by: Will Deacon <will@kernel.org>
Rather than open-code the extraction of the E0PD field from the MMFR2
register, we can use the cpuid_feature_extract_unsigned_field() helper
instead.
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Now that the decision to use non-global mappings is stored in a variable,
the check to avoid enabling them for the terminally broken ThunderX1
platform can be simplified so that it is only keyed off the MIDR value.
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Refactor the code which checks to see if we need to use non-global
mappings to use a variable instead of checking with the CPU capabilities
each time, doing the initial check for KPTI early in boot before we
start allocating memory so we still avoid transitioning to non-global
mappings in common cases.
Since this variable always matches our decision about non-global
mappings this means we can also combine arm64_kernel_use_ng_mappings()
and arm64_unmap_kernel_at_el0() into a single function, the variable
simply stores the result and the decision code is elsewhere. We could
just have the users check the variable directly but having a function
makes it clear that these uses are read-only.
The result is that we simplify the code a bit and reduces the amount of
code executed at runtime.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
In preparation for integrating E0PD support with KASLR factor out the
checks for interaction between KASLR and KPTI done in boot context into
a new function kaslr_requires_kpti(), in the process clarifying the
distinction between what we do in boot context and what we do at
runtime.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Kernel Page Table Isolation (KPTI) is used to mitigate some speculation
based security issues by ensuring that the kernel is not mapped when
userspace is running but this approach is expensive and is incompatible
with SPE. E0PD, introduced in the ARMv8.5 extensions, provides an
alternative to this which ensures that accesses from userspace to the
kernel's half of the memory map to always fault with constant time,
preventing timing attacks without requiring constant unmapping and
remapping or preventing legitimate accesses.
Currently this feature will only be enabled if all CPUs in the system
support E0PD, if some CPUs do not support the feature at boot time then
the feature will not be enabled and in the unlikely event that a late
CPU is the first CPU to lack the feature then we will reject that CPU.
This initial patch does not yet integrate with KPTI, this will be dealt
with in followup patches. Ideally we could ensure that by default we
don't use KPTI on CPUs where E0PD is present.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
[will: Fixed typo in Kconfig text]
Signed-off-by: Will Deacon <will@kernel.org>
As the Kconfig syntax gained support for $(as-instr) tests, move the LSE
gas support detection from Makefile to the main arm64 Kconfig and remove
the additional CONFIG_AS_LSE definition and check.
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
This adds basic building blocks required for ID_ISAR6 CPU register which
identifies support for various instruction implementation on AArch32 state.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-kernel@vger.kernel.org
Cc: kvmarm@lists.cs.columbia.edu
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
[will: Ensure SPECRES is treated the same as on A64]
Signed-off-by: Will Deacon <will@kernel.org>
Export the features introduced as part of ARMv8.6 exposed in the
ID_AA64ISAR1_EL1 and ID_AA64ZFR0_EL1 registers. This introduces the
Matrix features (ARMv8.2-I8MM, ARMv8.2-F64MM and ARMv8.2-F32MM) along
with BFloat16 (Armv8.2-BF16), speculation invalidation (SPECRES) and
Data Gathering Hint (ARMv8.0-DGH).
Signed-off-by: Julien Grall <julien.grall@arm.com>
[Added other features in those registers]
Signed-off-by: Steven Price <steven.price@arm.com>
[will: Don't advertise SPECRES to userspace]
Signed-off-by: Will Deacon <will@kernel.org>
We set the compat_elf_hwcap bits unconditionally on arm64 to
include the VFP and NEON support. However, the FP/SIMD unit
is optional on Arm v8 and thus could be missing. We already
handle this properly in the kernel, but still advertise to
the COMPAT applications that the VFP is available. Fix this
to make sure we only advertise when we really have them.
Fixes: 82e0191a1a ("arm64: Support systems without FP/ASIMD")
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The NO_FPSIMD capability is defined with scope SYSTEM, which implies
that the "absence" of FP/SIMD on at least one CPU is detected only
after all the SMP CPUs are brought up. However, we use the status
of this capability for every context switch. So, let us change
the scope to LOCAL_CPU to allow the detection of this capability
as and when the first CPU without FP is brought up.
Also, the current type allows hotplugged CPU to be brought up without
FP/SIMD when all the current CPUs have FP/SIMD and we have the userspace
up. Fix both of these issues by changing the capability to
BOOT_RESTRICTED_LOCAL_CPU_FEATURE.
Fixes: 82e0191a1a ("arm64: Support systems without FP/ASIMD")
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
We finalize the system wide capabilities after the SMP CPUs
are booted by the kernel. This is used as a marker for deciding
various checks in the kernel. e.g, sanity check the hotplugged
CPUs for missing mandatory features.
However there is no explicit helper available for this in the
kernel. There is sys_caps_initialised, which is not exposed.
The other closest one we have is the jump_label arm64_const_caps_ready
which denotes that the capabilities are set and the capability checks
could use the individual jump_labels for fast path. This is
performed before setting the ELF Hwcaps, which must be checked
against the new CPUs. We also perform some of the other initialization
e.g, SVE setup, which is important for the use of FP/SIMD
where SVE is supported. Normally userspace doesn't get to run
before we finish this. However the in-kernel users may
potentially start using the neon mode. So, we need to
reject uses of neon mode before we are set. Instead of defining
a new marker for the completion of SVE setup, we could simply
reuse the arm64_const_caps_ready and enable it once we have
finished all the setup. Also we could expose this to the
various users as "system_capabilities_finalized()" to make
it more meaningful than "const_caps_ready".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Broadcom Brahma-B53 CPUs do not implement ID_AA64PFR0_EL1.CSV3 but are
not susceptible to Meltdown, so add all Brahma-B53 part numbers to
kpti_safe_list[].
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
* for-next/elf-hwcap-docs:
: Update the arm64 ELF HWCAP documentation
docs/arm64: cpu-feature-registers: Rewrite bitfields that don't follow [e, s]
docs/arm64: cpu-feature-registers: Documents missing visible fields
docs/arm64: elf_hwcaps: Document HWCAP_SB
docs/arm64: elf_hwcaps: sort the HWCAP{, 2} documentation by ascending value
* for-next/smccc-conduit-cleanup:
: SMC calling convention conduit clean-up
firmware: arm_sdei: use common SMCCC_CONDUIT_*
firmware/psci: use common SMCCC_CONDUIT_*
arm: spectre-v2: use arm_smccc_1_1_get_conduit()
arm64: errata: use arm_smccc_1_1_get_conduit()
arm/arm64: smccc/psci: add arm_smccc_1_1_get_conduit()
* for-next/zone-dma:
: Reintroduction of ZONE_DMA for Raspberry Pi 4 support
arm64: mm: reserve CMA and crashkernel in ZONE_DMA32
dma/direct: turn ARCH_ZONE_DMA_BITS into a variable
arm64: Make arm64_dma32_phys_limit static
arm64: mm: Fix unused variable warning in zone_sizes_init
mm: refresh ZONE_DMA and ZONE_DMA32 comments in 'enum zone_type'
arm64: use both ZONE_DMA and ZONE_DMA32
arm64: rename variables used to calculate ZONE_DMA32's size
arm64: mm: use arm64_dma_phys_limit instead of calling max_zone_dma_phys()
* for-next/relax-icc_pmr_el1-sync:
: Relax ICC_PMR_EL1 (GICv3) accesses when ICC_CTLR_EL1.PMHE is clear
arm64: Document ICC_CTLR_EL3.PMHE setting requirements
arm64: Relax ICC_PMR_EL1 accesses when ICC_CTLR_EL1.PMHE is clear
* for-next/double-page-fault:
: Avoid a double page fault in __copy_from_user_inatomic() if hw does not support auto Access Flag
mm: fix double page fault on arm64 if PTE_AF is cleared
x86/mm: implement arch_faults_on_old_pte() stub on x86
arm64: mm: implement arch_faults_on_old_pte() on arm64
arm64: cpufeature: introduce helper cpu_has_hw_af()
* for-next/misc:
: Various fixes and clean-ups
arm64: kpti: Add NVIDIA's Carmel core to the KPTI whitelist
arm64: mm: Remove MAX_USER_VA_BITS definition
arm64: mm: simplify the page end calculation in __create_pgd_mapping()
arm64: print additional fault message when executing non-exec memory
arm64: psci: Reduce the waiting time for cpu_psci_cpu_kill()
arm64: pgtable: Correct typo in comment
arm64: docs: cpu-feature-registers: Document ID_AA64PFR1_EL1
arm64: cpufeature: Fix typos in comment
arm64/mm: Poison initmem while freeing with free_reserved_area()
arm64: use generic free_initrd_mem()
arm64: simplify syscall wrapper ifdeffery
* for-next/kselftest-arm64-signal:
: arm64-specific kselftest support with signal-related test-cases
kselftest: arm64: fake_sigreturn_misaligned_sp
kselftest: arm64: fake_sigreturn_bad_size
kselftest: arm64: fake_sigreturn_duplicated_fpsimd
kselftest: arm64: fake_sigreturn_missing_fpsimd
kselftest: arm64: fake_sigreturn_bad_size_for_magic0
kselftest: arm64: fake_sigreturn_bad_magic
kselftest: arm64: add helper get_current_context
kselftest: arm64: extend test_init functionalities
kselftest: arm64: mangle_pstate_invalid_mode_el[123][ht]
kselftest: arm64: mangle_pstate_invalid_daif_bits
kselftest: arm64: mangle_pstate_invalid_compat_toggle and common utils
kselftest: arm64: extend toplevel skeleton Makefile
* for-next/kaslr-diagnostics:
: Provide diagnostics on boot for KASLR
arm64: kaslr: Check command line before looking for a seed
arm64: kaslr: Announce KASLR status on boot
If CONFIG_ARM64_SVE=n then we fail to report ID_AA64ZFR0_EL1 as 0 when
read by userspace, despite being required by the architecture. Although
this is theoretically a change in ABI, userspace will first check for
the presence of SVE via the HWCAP or the ID_AA64PFR0_EL1.SVE field
before probing the ID_AA64ZFR0_EL1 register. Given that these are
reported correctly for this configuration, we can safely tighten up the
current behaviour.
Ensure ID_AA64ZFR0_EL1 is treated as RAZ when CONFIG_ARM64_SVE=n.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Fixes: 06a916feca ("arm64: Expose SVE2 features for userspace")
Signed-off-by: Will Deacon <will@kernel.org>
The HWCAP framework will detect a new capability based on the sanitized
version of the ID registers.
Sanitization is based on a whitelist, so any field not described will end
up to be zeroed.
At the moment, ID_AA64ISAR1_EL1.FRINTTS is not described in
ftr_id_aa64isar1. This means the field will be zeroed and therefore the
userspace will not be able to see the HWCAP even if the hardware
supports the feature.
This can be fixed by describing the field in ftr_id_aa64isar1.
Fixes: ca9503fc9e ("arm64: Expose FRINT capabilities to userspace")
Signed-off-by: Julien Grall <julien.grall@arm.com>
Cc: mark.brown@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
- 52-bit virtual addressing in the kernel
- New ABI to allow tagged user pointers to be dereferenced by syscalls
- Early RNG seeding by the bootloader
- Improve robustness of SMP boot
- Fix TLB invalidation in light of recent architectural clarifications
- Support for i.MX8 DDR PMU
- Remove direct LSE instruction patching in favour of static keys
- Function error injection using kprobes
- Support for the PPTT "thread" flag introduced by ACPI 6.3
- Move PSCI idle code into proper cpuidle driver
- Relaxation of implicit I/O memory barriers
- Build with RELR relocations when toolchain supports them
- Numerous cleanups and non-critical fixes
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl1yYREQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNAM3CAChqDFQkryXoHwdeEcaukMRVNxtxOi4pM4g
5xqkb7PoqRJssIblsuhaXjrSD97yWCgaqCmFe6rKoes++lP4bFcTe22KXPPyPBED
A+tK4nTuKKcZfVbEanUjI+ihXaHJmKZ/kwAxWsEBYZ4WCOe3voCiJVNO2fHxqg1M
8TskZ2BoayTbWMXih0eJg2MCy/xApBq4b3nZG4bKI7Z9UpXiKN1NYtDh98ZEBK4V
d/oNoHsJ2ZvIQsztoBJMsvr09DTCazCijWZiECadm6l41WEPFizngrACiSJLLtYo
0qu4qxgg9zgFlvBCRQmIYSggTuv35RgXSfcOwChmW5DUjHG+f9GK
=Ru4B
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"Although there isn't tonnes of code in terms of line count, there are
a fair few headline features which I've noted both in the tag and also
in the merge commits when I pulled everything together.
The part I'm most pleased with is that we had 35 contributors this
time around, which feels like a big jump from the usual small group of
core arm64 arch developers. Hopefully they all enjoyed it so much that
they'll continue to contribute, but we'll see.
It's probably worth highlighting that we've pulled in a branch from
the risc-v folks which moves our CPU topology code out to where it can
be shared with others.
Summary:
- 52-bit virtual addressing in the kernel
- New ABI to allow tagged user pointers to be dereferenced by
syscalls
- Early RNG seeding by the bootloader
- Improve robustness of SMP boot
- Fix TLB invalidation in light of recent architectural
clarifications
- Support for i.MX8 DDR PMU
- Remove direct LSE instruction patching in favour of static keys
- Function error injection using kprobes
- Support for the PPTT "thread" flag introduced by ACPI 6.3
- Move PSCI idle code into proper cpuidle driver
- Relaxation of implicit I/O memory barriers
- Build with RELR relocations when toolchain supports them
- Numerous cleanups and non-critical fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (114 commits)
arm64: remove __iounmap
arm64: atomics: Use K constraint when toolchain appears to support it
arm64: atomics: Undefine internal macros after use
arm64: lse: Make ARM64_LSE_ATOMICS depend on JUMP_LABEL
arm64: asm: Kill 'asm/atomic_arch.h'
arm64: lse: Remove unused 'alt_lse' assembly macro
arm64: atomics: Remove atomic_ll_sc compilation unit
arm64: avoid using hard-coded registers for LSE atomics
arm64: atomics: avoid out-of-line ll/sc atomics
arm64: Use correct ll/sc atomic constraints
jump_label: Don't warn on __exit jump entries
docs/perf: Add documentation for the i.MX8 DDR PMU
perf/imx_ddr: Add support for AXI ID filtering
arm64: kpti: ensure patched kernel text is fetched from PoU
arm64: fix fixmap copy for 16K pages and 48-bit VA
perf/smmuv3: Validate groups for global filtering
perf/smmuv3: Validate group size
arm64: Relax Documentation/arm64/tagged-pointers.rst
arm64: kvm: Replace hardcoded '1' with SYS_PAR_EL1_F
arm64: mm: Ignore spurious translation faults taken from the kernel
...
If a CPU doesn't support the page size for which the kernel is
configured, then we will complain and refuse to bring it online. For
secondary CPUs (and the boot CPU on a system booting with EFI), we will
also print an error identifying the mismatch.
Consequently, the only time that the cpufeature code can detect a
granule size mismatch is for a granule other than the one that is
currently being used. Although we would rather such systems didn't
exist, we've unfortunately lost that battle and Kevin reports that
on his amlogic S922X (odroid-n2 board) we end up warning and taining
with defconfig because 16k pages are not supported by all of the CPUs.
In such a situation, we don't actually care about the feature mismatch,
particularly now that KVM only exposes the sanitised view of the CPU
registers (commit 93390c0a1b - "arm64: KVM: Hide unsupported AArch64
CPU features from guests"). Treat the granule fields as non-strict and
let Kevin run without a tainted kernel.
Cc: Marc Zyngier <maz@kernel.org>
Reported-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
[catalin.marinas@arm.com: changelog updated with KVM sanitised regs commit]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The commit d5370f7548 ("arm64: prefetch: add alternative pattern for
CPUs without a prefetcher") introduced MIDR_IS_CPU_MODEL_RANGE() to be
used in has_no_hw_prefetch() with rv_min=0 which generates a compilation
warning from GCC,
In file included from ./arch/arm64/include/asm/cache.h:8,
from ./include/linux/cache.h:6,
from ./include/linux/printk.h:9,
from ./include/linux/kernel.h:15,
from ./include/linux/cpumask.h:10,
from arch/arm64/kernel/cpufeature.c:11:
arch/arm64/kernel/cpufeature.c: In function 'has_no_hw_prefetch':
./arch/arm64/include/asm/cputype.h:59:26: warning: comparison of
unsigned expression >= 0 is always true [-Wtype-limits]
_model == (model) && rv >= (rv_min) && rv <= (rv_max); \
^~
arch/arm64/kernel/cpufeature.c:889:9: note: in expansion of macro
'MIDR_IS_CPU_MODEL_RANGE'
return MIDR_IS_CPU_MODEL_RANGE(midr, MIDR_THUNDERX,
^~~~~~~~~~~~~~~~~~~~~~~
Fix it by converting MIDR_IS_CPU_MODEL_RANGE to a static inline
function.
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Will Deacon <will@kernel.org>
If CTR_EL0.{CWG,ERG} are 0b0000 then they must be interpreted to have
their architecturally maximum values, which defeats the use of
FTR_HIGHER_SAFE when sanitising CPU ID registers on heterogeneous
machines.
Introduce FTR_HIGHER_OR_ZERO_SAFE so that these fields effectively
saturate at zero.
Fixes: 3c739b5710 ("arm64: Keep track of CPU feature registers")
Cc: <stable@vger.kernel.org> # 4.4.x-
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
- arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}
- Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
manage the permissions of executable vmalloc regions more strictly
- Slight performance improvement by keeping softirqs enabled while
touching the FPSIMD/SVE state (kernel_neon_begin/end)
- Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new XAFLAG
and AXFLAG instructions for floating point comparison flags
manipulation) and FRINT (rounding floating point numbers to integers)
- Re-instate ARM64_PSEUDO_NMI support which was previously marked as
BROKEN due to some bugs (now fixed)
- Improve parking of stopped CPUs and implement an arm64-specific
panic_smp_self_stop() to avoid warning on not being able to stop
secondary CPUs during panic
- perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
platforms
- perf: DDR performance monitor support for iMX8QXP
- cache_line_size() can now be set from DT or ACPI/PPTT if provided to
cope with a system cache info not exposed via the CPUID registers
- Avoid warning on hardware cache line size greater than
ARCH_DMA_MINALIGN if the system is fully coherent
- arm64 do_page_fault() and hugetlb cleanups
- Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)
- Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the 'arm_boot_flags'
introduced in 5.1)
- CONFIG_RANDOMIZE_BASE now enabled in defconfig
- Allow the selection of ARM64_MODULE_PLTS, currently only done via
RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
over into the vmalloc area
- Make ZONE_DMA32 configurable
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAl0eHqcACgkQa9axLQDI
XvFyNA/+L+bnkz8m3ncydlqqfXomQn4eJJVQ8Uksb0knJz+1+3CUxxbO4ry4jXZN
fMkbggYrDPRKpDbsUl0lsRipj7jW9bqan+N37c3SWqCkgb6HqDaHViwxdx6Ec/Uk
gHudozDSPh/8c7hxGcSyt/CFyuW6b+8eYIQU5rtIgz8aVY2BypBvS/7YtYCbIkx0
w4CFleRTK1zXD5mJQhrc6jyDx659sVkrAvdhf6YIymOY8nBTv40vwdNo3beJMYp8
Po/+0Ixu+VkHUNtmYYZQgP/AGH96xiTcRnUqd172JdtRPpCLqnLqwFokXeVIlUKT
KZFMDPzK+756Ayn4z4huEePPAOGlHbJje8JVNnFyreKhVVcCotW7YPY/oJR10bnc
eo7yD+DxABTn+93G2yP436bNVa8qO1UqjOBfInWBtnNFJfANIkZweij/MQ6MjaTA
o7KtviHnZFClefMPoiI7HDzwL8XSmsBDbeQ04s2Wxku1Y2xUHLx4iLmadwLQ1ZPb
lZMTZP3N/T1554MoURVA1afCjAwiqU3bt1xDUGjbBVjLfSPBAn/25IacsG9Li9AF
7Rp1M9VhrfLftjFFkB2HwpbhRASOxaOSx+EI3kzEfCtM2O9I1WHgP3rvCdc3l0HU
tbK0/IggQicNgz7GSZ8xDlWPwwSadXYGLys+xlMZEYd3pDIOiFc=
=0TDT
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}
- Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
manage the permissions of executable vmalloc regions more strictly
- Slight performance improvement by keeping softirqs enabled while
touching the FPSIMD/SVE state (kernel_neon_begin/end)
- Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new
XAFLAG and AXFLAG instructions for floating point comparison flags
manipulation) and FRINT (rounding floating point numbers to integers)
- Re-instate ARM64_PSEUDO_NMI support which was previously marked as
BROKEN due to some bugs (now fixed)
- Improve parking of stopped CPUs and implement an arm64-specific
panic_smp_self_stop() to avoid warning on not being able to stop
secondary CPUs during panic
- perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
platforms
- perf: DDR performance monitor support for iMX8QXP
- cache_line_size() can now be set from DT or ACPI/PPTT if provided to
cope with a system cache info not exposed via the CPUID registers
- Avoid warning on hardware cache line size greater than
ARCH_DMA_MINALIGN if the system is fully coherent
- arm64 do_page_fault() and hugetlb cleanups
- Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)
- Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the
'arm_boot_flags' introduced in 5.1)
- CONFIG_RANDOMIZE_BASE now enabled in defconfig
- Allow the selection of ARM64_MODULE_PLTS, currently only done via
RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
over into the vmalloc area
- Make ZONE_DMA32 configurable
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits)
perf: arm_spe: Enable ACPI/Platform automatic module loading
arm_pmu: acpi: spe: Add initial MADT/SPE probing
ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens
ACPI/PPTT: Modify node flag detection to find last IDENTICAL
x86/entry: Simplify _TIF_SYSCALL_EMU handling
arm64: rename dump_instr as dump_kernel_instr
arm64/mm: Drop [PTE|PMD]_TYPE_FAULT
arm64: Implement panic_smp_self_stop()
arm64: Improve parking of stopped CPUs
arm64: Expose FRINT capabilities to userspace
arm64: Expose ARMv8.5 CondM capability to userspace
arm64: defconfig: enable CONFIG_RANDOMIZE_BASE
arm64: ARM64_MODULES_PLTS must depend on MODULES
arm64: bpf: do not allocate executable memory
arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages
arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP
arm64: module: create module allocations without exec permissions
arm64: Allow user selection of ARM64_MODULE_PLTS
acpi/arm64: ignore 5.1 FADTs that are reported as 5.0
arm64: Allow selecting Pseudo-NMI again
...
ARMv8.5 introduces the FRINT series of instructions for rounding floating
point numbers to integers. Provide a capability to userspace in order to
allow applications to determine if the system supports these instructions.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Anshuman Khandual