Commit Graph

283 Commits

Author SHA1 Message Date
Stepan Moskovchenko 0ab84745ef msm: iommu: Kconfig dependency for the IOMMU API
Make the IOMMU driver select the IOMMU API in the kernel
configuration.

Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-11-30 16:03:53 -08:00
Stepan Moskovchenko 00d4b2bb03 msm: iommu: Check if device is already attached
An IOMMU device can only be attached to one IOMMU domain at
any given time. Check whether the device is already
attached to a domain before allowing it to be attached to
another domain. If so, return busy.

Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-11-30 16:03:51 -08:00
Stepan Moskovchenko 2607b0a260 msm: iommu: Kconfig item for cacheable page tables
Add a Kconfig item to allow the IOMMU page tables to be
coherent in the L2 cache. This generally reduces IOTLB miss
latencies and has been shown to improve multimedia
performance.

Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-11-30 16:03:16 -08:00
Stepan Moskovchenko f6f41eb9cc msm: iommu: Don't flush page tables if no devices attached
Don't flush the page tables on an IOMMU domain if there are
no IOMMU devices attached to the domain. The act of
attaching to the domain will cause an implicit flush of
those areas if the page tables are configured to not be L2
cacheable.

Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-11-30 14:04:21 -08:00
Stepan Moskovchenko 516cbc793e msm: iommu: Mark functions with the right section names
Mark the init and exit functions as __init and __exit where
appropriate.

Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-11-30 14:03:36 -08:00
Stepan Moskovchenko e8952e3b32 msm: iommu: Support for the 2nd GFX core's IOMMU
Add the platform data and resources needed for the second
2D graphics core's IOMMU.

Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-11-30 14:02:56 -08:00
Stepan Moskovchenko ff25ff842e msm: iommu: Revise GFX2D0 IOMMU contexts and M2V mappings
Based on recommendations from chip designers,
optimize the Machine ID to translation context
mappings for the first 2D core's IOMMU. Remove the
"gfx2d0_texv3_smmu" context, as it is no longer needed
under the new mapping scheme.

Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-11-30 14:01:32 -08:00
Stepan Moskovchenko a5fcd5f59a msm: iommu: Revise GFX3D IOMMU contexts and M2V mappings
Based on recommendations from chip designers,
optimize the Machine ID to translation context
mappings for the 3D core's IOMMU. Remove the
the "gfx3d_smmu" context device, as it is no longer
needed under the new mapping scheme.

Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
[dwalker@codeaurora.org: updated commit text]
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-11-30 13:56:17 -08:00
Stepan Moskovchenko 12943325cd msm: iommu: Use more consistent naming in platform data
Rename all the IOMMU platform devices so that the names are
more consistent with the rest of the codebase.

Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-11-30 13:54:43 -08:00
Stepan Moskovchenko c4bd2eebee msm: iomap: Addresses and IRQs for 2nd GFX core IOMMU
Add register addresses and IRQ numbers for the IOMMU used
for the second 2D graphics core.

Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-11-30 13:53:45 -08:00
Stepan Moskovchenko 23513c3b39 msm: iommu: Increase maximum MID size to 5 bits
On msm8x60, the MID field on the AXI connection to the
IOMMU can be up to five bits wide. Thus, allow the IOMMU
context platform data to map up to 32 MIDs.

Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-11-30 13:53:08 -08:00
Gregory Bean 70cc2c00d7 msm: gpio: Add irq support to v2 gpiolib.
Complete the MSM v2 gpio subsystem by adding irq_chip.

Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-11-30 13:51:52 -08:00
Gregory Bean 0cc2fc1f2f msm: gpio: Add v2 gpio support to MSM SoCs.
Beginning with the MSM8x60, the hardware block responsible for gpio
support changes.  Provide gpiolib support for the new v2 architecture.

Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Pavan Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-11-30 13:51:17 -08:00
Russell King 612275ad39 Merge branch 'for-russell' of git://codeaurora.org/quic/kernel/dwalker/linux-msm into devel-stable 2010-11-26 10:26:10 +00:00
Daniel Walker 89c3dedf47 arm: kconfig: enable SMP for MSM targets
This just adds ARCH_MSM_SCORPIONMP to allow SMP selection for
MSM. MSM is unique in that it doesn't enable SCU or TWD.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-11-22 12:37:37 -08:00
Anand Gadiyar 963fec4e0f ARM: 6484/1: fix compile warning in mm/init.c
Commit 7c63984b86 (ARM: do not define VMALLOC_END relative to PAGE_OFFSET)
changed VMALLOC_END to be an explicit value. Before this, it was
relative to PAGE_OFFSET and therefore converted to unsigned long
as PAGE_OFFSET is an unsigned long. This introduced the following
build warning. Fix this by changing the explicit defines of
VMALLOC_END to be unsigned long.

  CC      arch/arm/mm/init.o
arch/arm/mm/init.c: In function 'mem_init':
arch/arm/mm/init.c:606: warning: format '%08lx' expects type 'long unsigned int', but argument 12 has type 'unsigned int'

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Acked-by: Uwe Kleine-K <u.kleine-koenig@pengutronix.dee>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-11-21 22:05:56 +00:00
Pavankumar Kondeti 4916a10832 msm: io: Export __msm_ioremap
This is required for modules to use ioremap()

Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-11-19 09:56:58 -08:00
David Brown 44d4a4f784 msm: make constant unsigned long to correct format warning
Define VMALLOC_END as an unsigned long to match expected type.
Eliminates a warning:

arch/arm/mm/init.c: In function 'mem_init':
arch/arm/mm/init.c:606: warning: format '%08lx' expects type
   'long unsigned int', but argument 12 has type 'unsigned int'

Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-11-16 12:28:05 -08:00
David Brown d2c5d2145f msm: smd: ifdef adjustment to remove unused variables
Put some variables inside of the same ifdef as the code that uses
them.

arch/arm/mach-msm/smd_debug.c: In function 'smsm_print_sleep_info':
arch/arm/mach-msm/smd_debug.c:274: warning: unused variable 'int_info'
arch/arm/mach-msm/smd_debug.c:273: warning: unused variable 'gpio'

Signed-off-by: David Brown <davidb@codeaurora.org>
[dwalker@codeaurora.org: changed the commit text a little.]
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-11-16 12:25:38 -08:00
David Brown 5d1394bb6b msm: sirc: remove some unused variables
Eliminate some unreferenced variables.

arch/arm/mach-msm/sirc.c:43: warning: 'save_type' defined but not used
arch/arm/mach-msm/sirc.c:44: warning: 'save_polarity' defined but not used

Signed-off-by: David Brown <davidb@codeaurora.org>
[dwalker@codeaurora.org: changed the commit text a little.]
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-11-16 12:23:58 -08:00
David Brown 9be58f317d msm: smd: Reduce driver log chatter
The MSM smd driver logs numerous messages during startup that are
useful for debug purposes.  Change some of these to pr_debug() to
match their purpose, and remove others that aren't really useful.

Cc: Brian Swetland <swetland@google.com>
Cc: Arve Hjønnevåg <arve@android.com>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-11-16 12:23:56 -08:00
Uwe Kleine-König b595076a18 tree-wide: fix comment/printk typos
"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-01 15:38:34 -04:00
Daniel Walker 4ee7a6c2d1 msm: Kconfig: drop unused config options
These two config options don't exist, and aren't ever going to.
So I simply delete them.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-29 15:56:17 -07:00
Daniel Walker 06125ff051 msm: fix compile failure when no debug uart is selected
If the board has a debug uart the user is given a choice of which
uart to use. The user can also select NONE, which means not to use one.
In most of our header files when NONE is selected nothing is defined
for MSM_DEBUG_UART_PHYS or MSM_DEBUG_UART_BASE. This causes a compile
failure in debug-macro.S which expect something to be defined there.

Example of the failure,

arch/arm/kernel/built-in.o: In function `hexbuf':
linux-2.6/arch/arm/kernel/debug.S:186: undefined reference to `MSM_DEBUG_UART_PHYS'
linux-2.6/arch/arm/kernel/debug.S:186: undefined reference to `MSM_DEBUG_UART_BASE'

This fixes the compile failure by adding an ifdef to debug-macro.S
that removes all the debug uart code in the case of NONE.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-29 15:56:16 -07:00
Daniel Walker bcd72c3e0a msm: fix debug-macro.S build failure
Originally there was an ifdef case to handle when no debug uart
was selected. In commit 0ea1293009
that case was removed which causes the following build failure,

linux-2.6/arch/arm/kernel/debug.S: Assembler messages:
linux-2.6/arch/arm/kernel/debug.S:174: Error: bad instruction `addruart r1,r2'
linux-2.6/arch/arm/kernel/debug.S:176: Error: bad instruction `waituart r2,r3'
linux-2.6/arch/arm/kernel/debug.S:177: Error: bad instruction `senduart r1,r3'
linux-2.6/arch/arm/kernel/debug.S:178: Error: bad instruction `busyuart r2,r3'
linux-2.6/arch/arm/kernel/debug.S:190: Error: bad instruction `addruart r1,r2'

This is a partial revert to add back the case which was removed with
two caveats. First the API for the addruart macro was updated, and
the new addruart case now return 0xfff00000 so that a know IO mapping
is created instead of a random one.

Cc: Jeremy Kerr <jeremy.kerr@canonical.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Jason Wang <jason77.wang@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-29 15:56:04 -07:00
Jeff Ohlstein 6f9419619e msm: timer: Decrease shift on timer clocksource
The shift of 24 causes the shift and multiply operation to sometimes
overflow, resulting in incorrect timer values and poor performance.

Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-27 14:24:02 -07:00
Vasiliy Kulikov a86c44d48a arm: mach-msm: fix error handling in msm_iommu_probe()
msm_iommu_probe() didn't free mem_region and mapped IO.
Also if request_mem_region() failed then error handling
code dereferenced NULL pointer.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Acked-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-27 14:24:02 -07:00
Daniel Walker efdfb2b118 msm: fix Kconfig target board selection
This prevents build failures since it's currently possible to select
8x50, 7x30, or 7x00 without selecting a specific board. These changes
just force a target selection, which is currently defaulting to the most
common one (7x30 only has one).

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-27 14:24:01 -07:00
Daniel Walker 79d98313e0 msm: fix compile failure on struct membank node member
In commit be37030274
"ARM: Remove DISCONTIGMEM support", it removed this "node" member
which cased the following compile failure in mach-msm,

linux/arch/arm/mach-msm/board-halibut.c: In function 'halibut_fixup':
linux/arch/arm/mach-msm/board-halibut.c:86: error: 'struct membank' has no member named 'node'
linux/arch/arm/mach-msm/board-halibut.c:86: error: implicit declaration of function 'PHYS_TO_NID'

I've removed the access to the node member which corrects the
compile failure.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-27 14:24:01 -07:00
Linus Torvalds 092e0e7e52 Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek
2010-10-22 10:52:56 -07:00
Nicolas Pitre 6451d7783b arm: remove machine_desc.io_pg_offst and .phys_io
Since we're now using addruart to establish the debug mapping, we can
remove the io_pg_offst and phys_io members of struct machine_desc.

The various declarations were removed using the following script:

  grep -rl MACHINE_START arch/arm | xargs \
  sed -i '/MACHINE_START/,/MACHINE_END/ { /\.\(phys_io\|io_pg_offst\)/d }'

[ Initial patch was from Jeremy Kerr, example script from Russell King ]

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Eric Miao <eric.miao at canonical.com>
2010-10-20 00:27:46 -04:00
Jeremy Kerr 0ea1293009 arm: return both physical and virtual addresses from addruart
Rather than checking the MMU status in every instance of addruart, do it
once in kernel/debug.S, and change the existing addruart macros to
return both physical and virtual addresses. The main debug code can then
select the appropriate address to use.

This will also allow us to retreive the address of a uart for the MMU
state that we're not current in.

Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com>
and Tony Lindgren <tony@atomide.com>, and fix for versatile express from
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>.

Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Jason Wang <jason77.wang@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-10-20 00:27:33 -04:00
Russell King 3c00079b31 Merge branch 'msm-core' of git://codeaurora.org/quic/kernel/dwalker/linux-msm into devel-stable 2010-10-19 19:55:59 +01:00
Arnd Bergmann 6038f373a3 llseek: automatically add .llseek fop
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.

The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.

New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time.  Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.

The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.

Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.

Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.

===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
//   but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}

@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}

@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
   *off = E
|
   *off += E
|
   func(..., off, ...)
|
   E = *off
)
...+>
}

@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}

@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
  *off = E
|
  *off += E
|
  func(..., off, ...)
|
  E = *off
)
...+>
}

@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}

@ fops0 @
identifier fops;
@@
struct file_operations fops = {
 ...
};

@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
 .llseek = llseek_f,
...
};

@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
 .read = read_f,
...
};

@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
 .write = write_f,
...
};

@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
 .open = open_f,
...
};

// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
...  .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};

@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
...  .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};

// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
...  .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};

// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};

// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};

@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+	.llseek = default_llseek, /* write accesses f_pos */
};

// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////

@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
 .write = write_f,
 .read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};

@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};

@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};

@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
2010-10-15 15:53:27 +02:00
Niranjana Vishwanathapura 88b5227710 msm: smd: enable smd on qsd8x50 target
Add msm_smd device in the qsd8x50 board file.
Signed-off-by: Niranjana Vishwanathapura <nvishwan@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-11 15:14:02 -07:00
Niranjana Vishwanathapura a8855e9c09 msm: smd: enable smd on msm7x30 target
Add msm_smd device in the msm7x30 board file.

Signed-off-by: Niranjana Vishwanathapura <nvishwan@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-11 15:13:05 -07:00
Stepan Moskovchenko d9c8279b32 msm: Platform data for msm8x60 IOMMUs
Add the platform data for the IOMMUs found on the Qualcomm
msm8x60 SoC.

Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08 15:12:52 -07:00
Stepan Moskovchenko c6a5951ee5 msm: Platform initialization for the IOMMU driver
Register a driver for the MSM IOMMU devices and a driver
for the translation context devices. Set up the global
IOMMU registers and initialize the context banks.

Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08 15:12:51 -07:00
Stepan Moskovchenko 0720d1f052 msm: Add MSM IOMMU support
Add support for the IOMMUs found on the upcoming Qualcomm
MSM8x60 chips. These IOMMUs allow virtualization of the
address space used by most of the multimedia cores on these
chips.

Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08 15:12:50 -07:00
Gregory Bean 69b7f6ff85 msm: add MSM8x60 FFA support
The MSM8X60 FFA contains different components than the MSM8X60 SURF,
and therefore requires a different ARCH type and machine ID.

Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08 15:12:49 -07:00
Steve Muckle 57bbf1cc8c msm: MSM8X60 simulator board support
Board configuration for MSM8X60 simulation.

Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08 15:12:48 -07:00
Steve Muckle 49b76f718d msm: add msm8x60_surf machine
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08 15:12:47 -07:00
Jeff Ohlstein 998ba079fe msm: physical offset for MSM8X60
The MSM8x60 has a different physical memory offset than other targets.

Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08 15:12:46 -07:00
Abhijeet Dharmapurikar e4fbb68f45 msm: 8x60: setup correct handlers for private interrupts
Private Peripheral interrupts could be edge triggered or level triggered
depending on the platform. Initialize handlers for these in board file.

Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08 15:12:45 -07:00
Jeff Ohlstein 569fb6e3e6 msm: add build support for msm8x60 target
Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08 15:12:44 -07:00
Daniel Walker 46fe5f29e3 msm: allow uart to be conditionally disabled
Some MSM targets don't select the debug UART in this way. For those we
need to disable this selection mechanism.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08 15:12:43 -07:00
Daniel Walker 4ca06de368 msm: dma: add stub functions for dma features not yet present on 8x60
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08 15:12:42 -07:00
Jeff Ohlstein 871c94a861 msm: clock: add dummy clock driver
Need to add this until real clock support for 8x60 goes in, or else some
drivers won't compile.

Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08 15:12:41 -07:00
Steve Muckle 9161d303af msm: 8x60: gic initialization fixup for RUMI
On RUMI platform STIs are not enabled by default, contrary to the
GIC spec. The bits for STIs in the enable/enable clear registers
are also RW instead of RO. STIs need to be enabled at initialization
time.

Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08 15:12:40 -07:00
Steve Muckle f880c5649e msm: irq: rename existing entry-macro to entry-macro-vic
The existing MSM irq entry macro is specific to a VIC
implementation. Renaming this makes room for irq support based on
other interrupt controllers.

Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08 15:12:38 -07:00
Steve Muckle a55df6edcf msm: MSM8X60 RUMI3 board support
Board configuration for MSM8X60 emulation on RUMI3.

Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08 15:12:37 -07:00
Jeff Ohlstein 672039f035 msm: timer: support 8x60 timers
Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08 15:12:36 -07:00
Abhijeet Dharmapurikar 01eb4f5c77 msm: irqs-8x60: interrupt map
Define the interrupt map in irq-8x60.h

Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08 15:12:35 -07:00
Steve Muckle ed1f31b4b7 msm: initial irq definitions for MSM8X60
IRQ assignments are different for MSM8X60 than other existing MSMs.

Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08 15:12:34 -07:00
Steve Muckle 6cf6dfefe1 msm: io: MSM8X60 io support
MSM8X60 has different IO mappings than previous MSMs.

Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08 15:12:33 -07:00
Steve Muckle c8aabaeb52 msm: create config option for proc-comm
Some builds may not support the proc-comm interface with
the baseband processor.

Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-08 15:12:32 -07:00
Gregory Bean 5d73c53b78 msm: qsd8x50: enable ethernet.
Configure the smc91x ethernet chip on the qsd8x50 SURF.

Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-06 09:01:20 -07:00
Gregory Bean 26cc666071 msm: gpio: Add gpiomux calls to request and free.
Add gpiomux get and put calls to msmgpio request and free,
in order to allow gpio lines to be properly reference-counted
and power-managed.

Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-06 09:01:19 -07:00
Gregory Bean 2783cc265c msm: add gpio driver for single-core SoCs.
Install a gpiolib driver supporting the on-chip gpios for
single-core MSMs in the 7x00 family, including 7x00A, 7x25, 7x27,
7x30, 8x50, and 8x50a.

As part of the ongoing effort to converge on a common code base,
this driver is based on the Google-Android msmgpio driver, whose
authors include Brian Swetland and Arve Hjønnevåg.

Cc: Arve Hjønnevåg <arve@android.com>
Cc: H Hartley Sweeten <hartleys@visionengravers.com>
Cc: Ryan Mallon <ryan@bluewatersys.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-06 09:01:19 -07:00
Gregory Bean ab78cde589 msm: Featurize gpiomux.
Featurize gpiomux so that systems like 7x00 which do not wish to use it
do not have to be saddled with the configuration tables.

Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-06 09:01:18 -07:00
Gregory Bean 10c4580e79 msm: gpio: Remove tlmm routines obsoleted by gpiomux.
Now that all supported gpio_tlmm_config-using boards
are using gpiomux, remove the deprecated code.

Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-06 09:01:17 -07:00
Gregory Bean 224f6de46a msm: convert 7x30 to gpiomux.
Change deprecated gpio_tlmm_config calls to gpiomux calls.

Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-06 09:01:17 -07:00
Gregory Bean dd22b8f703 msm: convert 8x50 to gpiomux.
Change the gpio-init code from deprecated gpio_tlmm_config
to the new gpiomux api.

Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-06 09:01:16 -07:00
Gregory Bean 1963a2afc8 msm: add gpiomux api for gpio multiplex & configuration.
Add the 'gpiomux' api, which addresses the following shortcomings
of existing tlmm api:

- gpio power-collapse, which is managed by a peripheral processor on
  other targets, must be managed by the application processor on the 8x60.
- The enable/disable flag of the legacy gpio_tlmm_config api
  is not applicable on the 8x60, and causes confusion.
- The gpio 'direction' bits are meaningless for all func_sel
  configurations except for generic-gpio mode (func_sel 0), in which
  case the gpio_direction_* functions should be used.  Having these
  bits in the tlmm api leads to confusion and misuse of the gpiolib
  api, and they have been removed in gpiomux.
- The functional api of the legacy system ran contrary to the typical
  use-case, which is a single massive configuration at boot.  Rather
  than forcing hundreds of 'config' function calls, the new api
  allows data to be configured with a single table.

gpiomux_get and gpiomux_put are meant to be called automatically
when gpio_request and gpio_free are called, giving automatic
gpiomux/tlmm control to those drivers/lines with simple
power profiles - in the simplest cases, an entry in the gpiomux table
and the correct usage of gpiolib is all that is required to get proper
gpio power control.

Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-06 09:01:15 -07:00
Nicolas Pitre 7c63984b86 ARM: do not define VMALLOC_END relative to PAGE_OFFSET
VMALLOC_END is supposed to be an absolute value, while PAGE_OFFSET may
vary depending on the selected user:kernel memory split mode through
CONFIG_VMSPLIT_*.  In fact, the goal of moving PAGE_OFFSET down is to
accommodate more directly addressed RAM by the kernel below the vmalloc
area, and having VMALLOC_END move along PAGE_OFFSET is rather against
the very reason why PAGE_OFFSET can be moved in the first place.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2010-10-01 22:28:19 -04:00
Linus Torvalds ce4327d372 Merge branch 'msm-core' of git://codeaurora.org/quic/kernel/dwalker/linux-msm
* 'msm-core' of git://codeaurora.org/quic/kernel/dwalker/linux-msm:
  msm: mmc: Add msm prefix to platform data structure
  msm: trout: Remove extern declaration from source file
  arm: msm: Fix section mismatch in smd.c.
  arm: msm: trout add mmc support
  arm: msm: trout: add trout specific gpio interrupts
  arm: msm: remove unused #include <linux/version.h>
2010-08-12 10:07:32 -07:00
Sahitya Tummala b5d643de3e msm: mmc: Add msm prefix to platform data structure
Rename mmc_platform_data to msm_mmc_platform_data as it is used
only by MSM platform.

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-08-09 15:48:23 -07:00
Sahitya Tummala 28d6c3db67 msm: trout: Remove extern declaration from source file
Add msm_add_sdcc() prototype to mach/board.h to fix the
checkpatch warning.

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-08-09 15:46:31 -07:00
Gregory Bean 4416e9eb0b arm: msm: Fix section mismatch in smd.c.
Repair a section mismatch between the smd driver's
platform_driver structure and its probe method.

Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-08-09 15:38:16 -07:00
Jiri Kosina d790d4d583 Merge branch 'master' into for-next 2010-08-04 15:14:38 +02:00
Russell King 7b70c4275f Merge branch 'devel-stable' into devel
Conflicts:
	arch/arm/kernel/entry-armv.S
	arch/arm/kernel/setup.c
	arch/arm/mm/init.c
2010-07-31 14:20:16 +01:00
Russell King be37030274 ARM: Remove DISCONTIGMEM support
Everything should now be using sparsemem rather than discontigmem, so
remove the code supporting discontigmem from ARM.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-16 10:57:35 +01:00
Daniel Walker 42a2c2149f arm: msm: trout add mmc support
This adds the platform data for MMC on trout.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-06-17 12:56:19 -07:00
Daniel Walker 8dadeea18b arm: msm: trout: add trout specific gpio interrupts
This adds the interrupt layer onto the initial trout gpio
changes.

There changes were adapted from the Google driver which lists
Arve Hjønnevåg <arve@android.com> as the author.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-06-17 12:55:41 -07:00
Huang Weiyi 39b022ffcf arm: msm: remove unused #include <linux/version.h>
Remove unused #include <linux/version.h>('s) in
  arch/arm/mach-msm/acpuclock-arm11.c
  arch/arm/mach-msm/clock.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-06-17 12:52:23 -07:00
Jiri Kosina f1bbbb6912 Merge branch 'master' into for-next 2010-06-16 18:08:13 +02:00
Uwe Kleine-König 421f91d21a fix typos concerning "initiali[zs]e"
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-06-16 18:05:05 +02:00
Pavel Machek 923a081c72 Add GPIO support for HTC Dream.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
[dwalker@codeaurora.org: renamed to trout, checkpatch cleanup]
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-06-15 13:19:43 -07:00
Daniel Walker 6d7b7d578f msm: dma: add completion.h header
At some point this was exposed (not sure how),

linux-2.6/arch/arm/mach-msm/dma.c:92: error: field 'complete' has incomplete type
linux-2.6/arch/arm/mach-msm/dma.c: In function 'dmov_exec_cmdptr_complete_func':
linux-2.6/arch/arm/mach-msm/dma.c:108: error: implicit declaration of function 'complete'
linux-2.6/arch/arm/mach-msm/dma.c: In function 'msm_dmov_exec_cmd':
linux-2.6/arch/arm/mach-msm/dma.c:120: error: implicit declaration of function 'init_completion'
linux-2.6/arch/arm/mach-msm/dma.c:123: error: implicit declaration of function 'wait_for_completion'

and the fix is just to add the header.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-06-07 16:16:33 -07:00
Linus Torvalds ec96e2fe95 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (103 commits)
  ARM: 6141/1: Add audio support part in arch/arm/mach-w90x900
  ARM: 5939/1: ARM: Add option CMDLINE_FORCE to force usage of the in-kernel cmdline
  ARM: 6140/1: silence a bogus sparse warning in unwind.c
  ARM: mach-at91: duplicated include
  ARM: arch/arm/nwfpe/fpsr.h: Checkpatch cleanup
  ARM: arch/arm/mach-shark/pci.c: Checkpatch cleanup
  ARM: arch/arm/nwfpe/ChangeLog: Checkpatch cleanup
  ARM: arch/arm/mach-sa1100/leds.c: Checkpatch cleanup
  ARM: arch/arm/mach-h720x/common.h: Checkpatch cleanup
  ARM: arch/arm/mach-footbridge/ebsa285-pci.c: Checkpatch cleanup
  ARM: arch/arm/mach-clps711x/Makefile.boot: Checkpatch cleanup
  ARM: arch/arm/boot/bootp/bootp.lds: Checkpatch cleanup
  ARM: SPEAR6xx: remove duplicated #include
  ARM: s3c6400_defconfig: Add NAND driver
  ARM: s3c6400_defconfig: enable sound as modules
  ARM: s3c6400_defconfig: enable power management
  ARM: s5pv210_defconfig: Update s5pv210_defconfig to v2.6.34
  ARM: s5pc110_defconfig: Update s5pc110_defconfig to v2.6.34
  ARM: s5p6442_defconfig: Update s5p6442_defconfig to v2.6.34
  ARM: s5p6440_defconfig: Update s5p6440_defconfig to v2.6.34
  ...
2010-05-25 12:06:33 -07:00
Russell King 3cde11c1b4 ARM: Continue removing useless bootmem.h includes
Catch those which have been missed by 6262c92f because they were
submitted via other routes.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-23 10:36:15 +01:00
Linus Torvalds da7806f9b0 Merge branch 'msm-mmc_sdcc' of git://codeaurora.org/quic/kernel/dwalker/linux-msm
* 'msm-mmc_sdcc' of git://codeaurora.org/quic/kernel/dwalker/linux-msm:
  drivers: mmc: msm_sdcc: Add EMBEDDED_SDIO support
  mmc: msm_sdcc: Fix issue where clocks could be disabled mid transaction
  mmc: msm_sdcc: Fix the dma exec function to use the proper delays
  mmc: msm_sdcc: Don't set host->curr.mrq until after we're sure the busclk timer won't fire
  mmc: msm_sdcc: Enable busclk idle timer for power savings
  mmc: msm_sdcc: Don't disable interrupts while suspending
  mmc: msm_sdcc: Fix issue where we might not end a sucessfull request
  mmc: msm_sdcc: Featurize busclock power save and disable it by default
  mmc: msm_sdcc: Fix bug where busclk expiry timer was not properly disabled
  mmc: msm_sdcc: Reduce command timeouts and improve reliability.
  mmc: msm_sdcc: Schedule clock disable after probe
  mmc: msm_sdcc: Wrap readl/writel calls with appropriate clk delays
  mmc: msm_sdcc: Driver clocking/irq improvements
  msm: Add 'execute' datamover callback
  mmc: msm_sdcc: Snoop SDIO_CCCR_ABORT register
  mmc: msm_sdcc: Clean up clock management and add a 10us delay after enabling clocks
2010-05-21 14:38:35 -07:00
Daniel Walker 7b52161d14 msm: 7x30 Kconfig and makefile changes
Enables basic boot support for the MSM7x30 SURF development
board.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
2010-05-13 16:08:55 -07:00
Gregory Bean 37a298fb6a msm: clock support for the MSM7x30 CPU.
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
2010-05-13 16:08:53 -07:00
Daniel Walker 41f04b17b6 msm: physical offset for MSM7X30
The MSM7x30 does not have a separate bank of memory for shared
memory communication with the radio CPU.  Set the kernel base
address 2MB in, to use this first 2MB for this purpose.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
2010-05-13 16:08:51 -07:00
Daniel Walker c83b2bf66a msm: io: add io support for 7x30
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
2010-05-13 16:08:49 -07:00
Daniel Walker 1ed8d58fcb msm: Add extern for 7x30 clock list.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
2010-05-13 16:08:48 -07:00
Daniel Walker 2f2a74e637 msm: dma: add 7x30 security domain abstraction
The MSM SOC's DMA controller contains several security domains.
On the MSM7x00, only security domain 3 is accessible to our CPU.
The 7x30, however, uses security domain 2.  Fix up the register
definition macros to select this appropriately, based on
configured target.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
2010-05-13 16:08:46 -07:00
Daniel Walker 90e37c57ba msm: update basic board layout for MSM7x30
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
2010-05-13 16:08:44 -07:00
Daniel Walker 10932767d2 msm: add devices-msm7x30.c
This adds a clock list, and common resource structures
for MSM7x30.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
2010-05-13 16:08:43 -07:00
Daniel Walker 184d252acd msm: add msm_iomap-7x30.h for MSM7x30 support
Add a header describing the io regions for MSM7x30.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
2010-05-13 16:08:41 -07:00
Daniel Walker 1b54b39eaf msm: irqs: add irqs-7x30.h for MSM7x30 support
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
2010-05-13 16:08:40 -07:00
Daniel Walker 4ad15e6f56 msm: 8x50 Kconfig changes
Enable CONFIG_ARCH_QSD8X50.  This is the first SOC with the
Scorpion processor.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
2010-05-13 16:08:38 -07:00
Daniel Walker 81d658ac64 msm: physical offset for QSD8x50
Support different RAM base addresses used by Qualcomm SOCs, with
QSD8x50 as the first addtional one.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
2010-05-13 16:08:37 -07:00
Daniel Walker cf62ffae25 msm: io: add io support for 8x50
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
2010-05-13 16:08:35 -07:00
Daniel Walker acb241cb61 msm: add extern for 8x50 clock list.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
2010-05-13 16:08:33 -07:00
Daniel Walker 62a6cc578c msm: add devices-qsd8x50.c
This adds a clock list, and common resource structures
for QSD8x50.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
2010-05-13 16:08:32 -07:00
Daniel Walker d1c0d43d40 msm: update basic board layout for QSD8x50
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
2010-05-13 16:08:30 -07:00
Daniel Walker eb61bf8559 msm: add msm_iomap-8x50.h for QSD8x50 support
Add a header describing the io regions for QSD8x50.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
2010-05-13 16:08:29 -07:00
Daniel Walker e502c3777f msm: irqs: add irqs-8x50.h for QSD8x50 support
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
2010-05-13 16:08:27 -07:00
Daniel Walker 83a2c0e4bd msm: timer: allow MSM_DGT_BASE to be overriden
Some SoC need to redefine MSM_DGT_BASE from it's default.
This allows it to be defined in a header to override the
default value.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-13 16:08:26 -07:00
Gregory Bean f9f3d31318 msm: add Qualcomm 7x30 interrupt controller driver.
Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
2010-05-13 16:08:24 -07:00
Gregory Bean 1de238e0eb msm: add tlmm support for gpio.
GPIO support for Qualcomm SOCs requires interaction with the
radio (baseband processor). This API allows the different boards
to enable GPIO through the radio processor in a generic way.

Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
2010-05-13 16:08:22 -07:00
Daniel Walker 5e96da5d50 msm: generalize clock support.
The 'PCOM' method of clock control (commands issued to the radio
CPU) is shared across several (but not all) Qualcomm SOCs.
Generalize this clock mechanism so these other SOCs can be added.

Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
2010-05-13 16:08:20 -07:00
Gregory Bean ec4d79255c msm: add sirc interrupt controller driver.
Scorpion-based SOCs from Qualcomm use a different interrupt
controller 'sirc'.

Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
2010-05-13 16:07:56 -07:00
Gregory Bean d2e753bf93 msm: generialize iomap to support multiple SOCs.
msm_iomap.h is specific to the MSM7x00 series devices.  Generalize
this in preparation to support more devices.

Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
2010-05-13 16:07:54 -07:00
Gregory Bean 8f90c7b60d msm: generialize IRQ to support multiple SOCs.
irqs.h is specific to the MSM7x00 series devices.  Generalize
this in preparation to support more devices.

Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
2010-05-13 16:07:53 -07:00
Gregory Bean 0a8cff388a msm: generalization to support multiple SOCs.
devices.c is specific to the MSM7x00 series of SOCs.  Rename
appropriately in preparation to support more devices.

Signed-off-by: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
2010-05-13 16:07:50 -07:00
Daniel Walker 29d3dedf22 arm: msm: video: add msm_fb.h
Also drops the old mddi structure, which conflicts with the new
file.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:19:41 -07:00
Daniel Walker 869a2a09e4 arm: msm: smd: fix initcall prototype compiler warning
This fixes the following warning,

arch/arm/mach-msm/smd_debug.c:240: warning: initialization from incompatible pointer type

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:19:39 -07:00
Daniel Walker 42df2c9916 arm: msm: trout: fix build failure without UART
Without a debug uart selected you get this failure,

arch/arm/mach-msm/board-trout.c:85: error: 'MSM_DEBUG_UART_PHYS' undeclared here (not in a function)
arch/arm/mach-msm/board-trout.c:86: error: 'MSM_DEBUG_UART_BASE' undeclared here (not in a function)

This just removes these lines in that case.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:19:37 -07:00
Daniel Walker 3a9f346a95 arm: msm: smd: remove Kconfig menu option
This removes the Kconfig menu option. SMD can still be selected
but it's done inside the Kconfig file and not via the menu.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:19:35 -07:00
Daniel Walker 0aec66d493 arm: msm: smd: fix SMD modem processor sync condition
When booting up we need to wait for the modem processor to
partially boot. This is because the modem processor does
resource allocation for us. If we don't wait the modem won't
honor our requests and we end up crashing or in an unknown
state. This change just formalizes the waiting process.

Signed-off-by: Daniel Walker <c_dwalke@quicinc.com>
2010-05-12 09:19:33 -07:00
Daniel Walker b13525c263 arm: msm: smd: ifdef dsp irq handler
This irq handler isn't used in all cases, so add the proper ifdef. This
eliminates a compiler warning due to the function not getting used.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:19:29 -07:00
Daniel Walker 3843ac3a5c arm: msm: smd: remove unneeded predefines
This just removed some unneeded predefines. One needed a whole
function moved down further. The others could just be deleted.

No functional changes.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:19:06 -07:00
Daniel Walker 74df1d07ee arm: msm: smd: msm7x30 a2m clean up
This moves the msm_a2m_int() function into the header, and
does a small macro clean up to be more inline with Linux
norms. No functional changes.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:19:04 -07:00
Daniel Walker 1a86fbc167 arm: msm: smd: convert unsigned addr to unsigned long
"unsigned" translates to "unsigned int", but this value holds an
address. We always want to use unsigned long for addresses since
it will change size to fit the machine.

This just convert the one address holder to unsigned long.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:19:03 -07:00
Daniel Walker bf83de4037 arm: msm: smd: use either package v3 or v4 not both
This modifies SMD to use either the package v3 or package v4,
but not both. The current code tries to allocate as v4 on all
system which can produce a scary looking error message on boot up,

smem_find(16, 40): wrong size 16424
smd_alloc_channel() cid=02 size=08192 'SMD_RPCCALL'

With this error the code then falls back on the package v3 allocation
method. This method is inefficient because it causes a slow down
on some systems even when the allocation method can be determined
at compile time. It also causes a kernel size increase that effects
all system and is not needed.

This change corrects the allocation to use one method or the other
and not both.

Signed-off-by: Daniel Walker <c_dwalke@quicinc.com>
2010-05-12 09:18:32 -07:00
Daniel Walker 79848a2a73 arm: msm: smd: checkpatch clean up of smd/proc_comm
This cleans up coding style. There are no run time changes.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:15:39 -07:00
Dima Zavin 93873bcbd1 [ARM] msm: smd: Force the half_channel struct aligmnent to 4
Forcing the alignment prevents gcc from generating byte reads for word
member variables. Lack of this caused issues when the app processor
modified struct members and the modem saw a partial word write.

Signed-off-by: Dima Zavin <dima@android.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:15:37 -07:00
Dima Zavin b42dc44afc arm: msm: correctly signal the apps-to-modem irq in smd/proc_comm
Signed-off-by: Dima Zavin <dima@android.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:15:35 -07:00
Brian Swetland 636eb9cbae msm: smd: provide atomic channel writes
Some smd clients may write from multiple threads, in which case it's
not safe to call smd_write without holding a lock.  smd_write_atomic()
provides the same functionality as smd_write() but obtains the smd
lock first.

Signed-off-by: Brian Swetland <swetland@google.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:15:31 -07:00
Iliyan Malchev 1207babdcd [ARM] msm: add /proc/last_radio_log when supported by the modem.
Signed-off-by: Iliyan Malchev <malchev@google.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:15:24 -07:00
Brian Swetland 34f719b0c2 msm/qsd: smd: avoid race condition in smd channel allocation
Don't mark a channel as allocated if we failed to allocate it
(perhaps the modem updated one table but not the other, etc)

Signed-off-by: Brian Swetland <swetland@google.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:15:21 -07:00
Haley Teng 7632fba051 [ARM] msm: smd: Update the correct fTAIL pointer after reading from fifo
When we read data out of the sender's fifo, we need to advance the sender's
tail pointer, not the receiver's.

Signed-off-by: Haley Teng <Haley_Teng@htc.com>
Acked-by: Dima Zavin <dima@android.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:15:16 -07:00
Brian Swetland 37521a3181 [ARM] msm: smd: add support for DSP SMD channels
- QSD8250 has a DSP that speaks SMD, in addition to the modem
- handle a separate list of modem vs dsp channels
- install dsp smd irq handler as necessary

Signed-off-by: Brian Swetland <swetland@google.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:15:11 -07:00
Brian Swetland 03e00cd350 [ARM] msm: cleanup smd, separate debugfs support
- pull debug code into smd_debug.c
- move necessary structures and defines into smd_private.h
- fix some comment formatting, etc

Signed-off-by: Brian Swetland <swetland@google.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:15:09 -07:00
Arve Hjønnevåg ec9d3d14ff [ARM] msm: Add 8k power collapse support to smd
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:15:07 -07:00
Arve Hjønnevåg 283794100d [ARM] msm: Add item argument to smsm_change_state and smsm_get_state
The new protocol require writing to two state fields, and reading
several fields.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:15:03 -07:00
Brian Swetland 5b0f5a3f60 msm: smd: initial support for smd v2
- support both v2 and v1 style smd channels
- support both v2 and v1 smsm shared state
- update smsm state defines and smem item enum
- prep work for dealing with smd to qdsp6
- simplify some smem access to minimize use of smem_alloc() at runtime

Signed-off-by: Brian Swetland <swetland@google.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:15:01 -07:00
Brian Swetland 4d4fb2660d [ARM] msm: smd: don't crash if the smd channel table doesn't exist
Signed-off-by: Brian Swetland <swetland@google.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:14:59 -07:00
Brian Swetland 2eb44eb9c8 [ARM] msm: shared memory interface for baseband processor ipc
This code provides the low level interface to the "shared memory
state machine" (smsm), and the virtual serial channels (smd), used
to communicate with the baseband processor.  Higher level transports
(rpc, ethernet, AT command channel, etc) ride on top of this.

Signed-off-by: Brian Swetland <swetland@google.com>
2010-05-12 09:14:52 -07:00
Dima Zavin 830d843b75 [ARM] msm: sdcc: Make slot status irq be a resource
Also, convert all SDCC IRQ resources to be named. No longer pass status_irq
in the platform_data

Signed-off-by: Dima Zavin <dima@android.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:14:50 -07:00
San Mehat 5d4f77ffef [ARM] msm: common: Add SDC device runtime registration
Signed-off-by: San Mehat <san@google.com>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:14:48 -07:00
Daniel Walker 1b802ff79f arm: msm: add board file for Nexus One (ie. mahimahi)
This adds a basic board file without Kconfig changes.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:14:43 -07:00
Willie Ruan 1b70de32ac [ARM] msm: add new vreg IDs for MSM7X30
Signed-off-by: Willie Ruan <wruan@quicinc.com>
2010-05-12 09:14:41 -07:00
Matt Wilson 0e44106de5 arm: msm: add vreg reference count
Support independent enable and disable by clients for common
vreg. First enable switches on and last disable switches off.

This change has no check for voltage level so clients
must agree on level for common vreg.

Signed-off-by: Matthew Wilson <mtwilson@quicinc.com>
2010-05-12 09:14:40 -07:00
Daniel Walker 4eab62519f arm: msm: warning fix in acpuclock.c
Fixes the following warning,

arch/arm/mach-msm/acpuclock-arm11.c:138: warning: 'freq_table' defined but not used

when CONFIG_CPU_FREQ_TABLE is not enabled.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:14:38 -07:00
Steve Muckle 4783de9bba arm: msm: status for vreg
Keep track of the success/failure of the last vreg proc comm
command, and return that on debugfs reads.

Signed-off-by: Steve Muckle <smuckle@quicinc.com>
2010-05-12 09:14:36 -07:00
Steve Muckle 0c50b444b6 arm: msm: return error pointer in vreg_get if vreg not found
Signed-off-by: Steve Muckle <smuckle@quicinc.com>
2010-05-12 09:14:34 -07:00
Daniel Walker 2012e49e8a arm: msm: move board-dream.c to board-trout.c
Move the naming of this board file back to the original Google naming.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:14:33 -07:00
Daniel Walker 43b39f9f04 arm: msm: add cpu frequency controls
This adds acpuclock-arm11.c from Google. This provides control
over the cpu frequency for arm11 cpu's.

This has shared authorship between Google, and Qualcomm. Most
of it was written by Mike Chan at Google.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:14:20 -07:00
Brian Swetland 9f68fcdb8f msm: add dsb() syncronization to datamover driver
Avoids problems on the scorpion core.

Signed-off-by: Brian Swetland <swetland@google.com>
2010-05-12 09:14:17 -07:00
Arve Hjønnevåg c5541079da [ARM] msm: dma: Enable dma clock while dma is active
Signed-off-by: Arve Hjønnevåg <arve@android.com>
2010-05-12 09:14:14 -07:00
Arve Hjønnevåg a6407dd7b8 [ARM] msm: dma: disable_irq -> disable_irq_nosync
Signed-off-by: Arve Hjønnevåg <arve@android.com>
2010-05-12 09:14:11 -07:00
Dima Zavin 5f5d585167 [ARM] msm: Update list of proc_comm enums.
Signed-off-by: Dima Zavin <dima@android.com>
2010-05-12 09:14:00 -07:00
Arve Hjønnevåg d6ada25776 [ARM] msm: irq: fix lockdep issues
Signed-off-by: Brian Swetland <swetland@google.com>
2010-05-12 09:13:56 -07:00
Arve Hjønnevåg 36cf1b55b4 [ARM] msm: Add MSM_DEBUG_UART option.
Signed-off-by: Arve Hjønnevåg <arve@android.com>
2010-05-12 09:13:53 -07:00
Arve Hjønnevåg 6bd631e17e [ARM] msm: halibut: Add memory configuration. 2010-05-12 09:13:49 -07:00
Daniel Walker a32d2feb80 arm: msm: add board file for QSD8x50 SURF and FFA
This adds a basic board file without Kconfig changes.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12 09:13:44 -07:00