The RDMA reader function doesn't change once an svcxprt_rdma is
instantiated. Instead of checking sc_devcap during every incoming
RPC, set the reader function once when the connection is accepted.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
xdr_start() can return the wrong rmsgp address if an assumption
about how the xdr_buf was constructed changes. When it gets it
wrong, the client receives a reply that has gibberish in the
RPC/RDMA header, preventing it from matching a waiting RPC request.
Instead, make (and document) just one assumption: that the RDMA
header for the client's RPC call is at the start of the first page
in rq_pages.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Current convention is to avoid using BUG_ON() in places where an
oops could cause complete system failure.
Replace BUG_ON() call sites in svcrdma with an assertion error
message and allow execution to continue safely.
Some BUG_ON() calls are removed because they have never fired in
production (that we are aware of).
Some WARN_ON() calls are also replaced where a back trace is not
helpful; e.g., in a workqueue task.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The byte_count argument is not used, and the function is called
only from one place.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Nit: remove an unused variable to squelch a compiler warning.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Nit: Fix inconsistent white space in dprintk messages.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
A struct xdr_stream at a page boundary might point to the end of one
page or the beginning of the next, but xdr_truncate_encode isn't
prepared to handle the former.
This can cause corruption of NFSv4 READDIR replies in the case that a
readdir entry that would have exceeded the client's dircount/maxcount
limit would have ended exactly on a 4k page boundary. You're more
likely to hit this case on large directories.
Other xdr_truncate_encode callers are probably also affected.
Reported-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Tested-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Fixes: 3e19ce762b "rpc: xdr_truncate_encode"
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There is nice kernel helper to escape a given strings by provided rules. Let's
use it instead of custom approach.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[bfields@redhat.com: fix length calculation]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...move the WARN_ON_ONCE inside the following if block since they use
the same condition.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
These were useful when I was tracking down a race condition between
svc_xprt_do_enqueue and svc_get_next_xprt.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Testing has shown that the pool->sp_lock can be a bottleneck on a busy
server. Every time data is received on a socket, the server must take
that lock in order to dequeue a thread from the sp_threads list.
Address this problem by eliminating the sp_threads list (which contains
threads that are currently idle) and replacing it with a RQ_BUSY flag in
svc_rqst. This allows us to walk the sp_all_threads list under the
rcu_read_lock and find a suitable thread for the xprt by doing a
test_and_set_bit.
Note that we do still have a potential atomicity problem however with
this approach. We don't want svc_xprt_do_enqueue to set the
rqst->rq_xprt pointer unless a test_and_set_bit of RQ_BUSY returned
zero (which indicates that the thread was idle). But, by the time we
check that, the bit could be flipped by a waking thread.
To address this, we acquire a new per-rqst spinlock (rq_lock) and take
that before doing the test_and_set_bit. If that returns false, then we
can set rq_xprt and drop the spinlock. Then, when the thread wakes up,
it must set the bit under the same spinlock and can trust that if it was
already set then the rq_xprt is also properly set.
With this scheme, the case where we have an idle thread no longer needs
to take the highly contended pool->sp_lock at all, and that removes the
bottleneck.
That still leaves one issue: What of the case where we walk the whole
sp_all_threads list and don't find an idle thread? Because the search is
lockess, it's possible for the queueing to race with a thread that is
going to sleep. To address that, we queue the xprt and then search again.
If we find an idle thread at that point, we can't attach the xprt to it
directly since that might race with a different thread waking up and
finding it. All we can do is wake the idle thread back up and let it
attempt to find the now-queued xprt.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Chris Worley <chris.worley@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In a later patch, we'll be removing some spinlocking around the socket
and thread queueing code in order to fix some contention problems. At
that point, the stats counters will no longer be protected by the
sp_lock.
Change the counters to atomic_long_t fields, except for the
"sockets_queued" counter which will still be manipulated under a
spinlock.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Chris Worley <chris.worley@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...also make the manipulation of sp_all_threads list use RCU-friendly
functions.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Tested-by: Chris Worley <chris.worley@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently all svc_create callers pass in NULL for the shutdown parm,
which then gets fixed up to be svc_rpcb_cleanup if the service uses
rpcbind.
Simplify this by instead having the the only caller that requires it
(lockd) pass in svc_rpcb_cleanup and get rid of the special casing.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The way that svc_wake_up works is a bit inefficient. It walks all of the
available pools for a service and either wakes up a task in each one or
sets the SP_TASK_PENDING flag in each one.
When svc_wake_up is called, there is no need to wake up more than one
thread to do this work. In practice, only lockd currently uses this
function and it's single threaded anyway. Thus, this just boils down to
doing a wake up of a thread in pool 0 or setting a single flag.
Eliminate the for loop in this function and change it to just operate on
pool 0. Also update the comments that sit above it and get rid of some
code that has been commented out for years now.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In a later patch, we'll want to be able to handle this flag without
holding the sp_lock. Change this field to an unsigned long flags
field, and declare a new flag in it that can be managed with atomic
bitops.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In a later patch, we're going to need some atomic bit flags. Since that
field will need to be an unsigned long, we mitigate that space
consumption by migrating some other bitflags to the new field. Start
with the rq_secure flag.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Highlights include:
Features:
- NFSv4.2 client support for hole punching and preallocation.
- Further RPC/RDMA client improvements.
- Add more RPC transport debugging tracepoints.
- Add RPC debugging tools in debugfs.
Bugfixes:
- Stable fix for layoutget error handling
- Fix a change in COMMIT behaviour resulting from the recent io code updates
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wOP3
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.19-1' into nfsd for-3.19 branch
Mainly what I need is 860a0d9e51 "sunrpc: add some tracepoints in
svc_rqst handling functions", which subsequent server rpc patches from
jlayton depend on. I'm merging this later tag on the assumption that's
more likely to be a tested and stable point.
Currently, it leaks when the allocation fails.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
All it does is indicate whether a xprt has already been deleted from
a list or not, which is unnecessary since we use list_del_init and it's
always set and checked under the sv_lock anyway.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add a new directory heirarchy under the debugfs sunrpc/ directory:
sunrpc/
rpc_xprt/
<xprt id>/
Within that directory, we can put files that give info about the
xprts. We do have the (minor) problem that there is no succinct,
unique identifier for rpc_xprts. So we generate them synthetically
with a static atomic_t counter.
For now, this directory just holds an "info" file, but we may add
other files to it in the future.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
It's possible to get a dump of the RPC task queue by writing a value to
/proc/sys/sunrpc/rpc_debug. If you write any value to that file, you get
a dump of the RPC client task list into the log buffer. This is a rather
inconvenient interface however, and makes it hard to get immediate info
about the task queue.
Add a new directory hierarchy under debugfs:
sunrpc/
rpc_clnt/
<clientid>/
Within each clientid directory we create a new "tasks" file that will
dump info similar to what shows up in the log buffer, but with a few
small differences -- we avoid printing raw kernel addresses in favor of
symbolic names and the XID is also displayed.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
These patches various bugfixes and cleanups for using NFS over RDMA, including
better error handling and performance improvements by using pad optimization.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=YIru
-----END PGP SIGNATURE-----
Merge tag 'nfs-rdma-for-3.19' of git://git.linux-nfs.org/projects/anna/nfs-rdma into linux-next
Pull NFS client RDMA changes for 3.19 from Anna Schumaker:
"NFS: Client side changes for RDMA
These patches various bugfixes and cleanups for using NFS over RDMA, including
better error handling and performance improvements by using pad optimization.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>"
* tag 'nfs-rdma-for-3.19' of git://git.linux-nfs.org/projects/anna/nfs-rdma:
xprtrdma: Display async errors
xprtrdma: Enable pad optimization
xprtrdma: Re-write rpcrdma_flush_cqs()
xprtrdma: Refactor tasklet scheduling
xprtrdma: unmap all FMRs during transport disconnect
xprtrdma: Cap req_cqinit
xprtrdma: Return an errno from rpcrdma_register_external()
These patches fixes for iostats and SETCLIENTID in addition to cleaning
up the nfs4_init_callback() function.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=PMdS
-----END PGP SIGNATURE-----
Merge tag 'nfs-cel-for-3.19' of git://git.linux-nfs.org/projects/anna/nfs-rdma into linux-next
Pull pull additional NFS client changes for 3.19 from Anna Schumaker:
"NFS: Generic client side changes from Chuck
These patches fixes for iostats and SETCLIENTID in addition to cleaning
up the nfs4_init_callback() function.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>"
* tag 'nfs-cel-for-3.19' of git://git.linux-nfs.org/projects/anna/nfs-rdma:
NFS: Clean up nfs4_init_callback()
NFS: SETCLIENTID XDR buffer sizes are incorrect
SUNRPC: serialize iostats updates
Occasionally mountstats reports a negative retransmission rate.
Ensure that two RPCs completing concurrently don't confuse the sums
in the transport's op_metrics array.
Since pNFS filelayout can invoke rpc_count_iostats() on another
transport from xprt_release(), we can't rely on simply holding the
transport_lock in xprt_release(). There's nothing for it but hard
serialization. One spin lock per RPC operation should make this as
painless as it can be.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
An async error upcall is a hard error, and should be reported in
the system log.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The Linux NFS/RDMA server used to reject NFSv3 WRITE requests when
pad optimization was enabled. That bug was fixed by commit
e560e3b510 ("svcrdma: Add zero padding if the client doesn't send
it").
We can now enable pad optimization on the client, which helps
performance and is supported now by both Linux and Solaris servers.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Currently rpcrdma_flush_cqs() attempts to avoid code duplication,
and simply invokes rpcrdma_recvcq_upcall and rpcrdma_sendcq_upcall.
1. rpcrdma_flush_cqs() can run concurrently with provider upcalls.
Both flush_cqs() and the upcalls were invoking ib_poll_cq() in
different threads using the same wc buffers (ep->rep_recv_wcs
and ep->rep_send_wcs), added by commit 1c00dd0776 ("xprtrmda:
Reduce calls to ib_poll_cq() in completion handlers").
During transport disconnect processing, this sometimes resulted
in the same reply getting added to the rpcrdma_tasklets_g list
more than once, which corrupted the list.
2. The upcall functions drain only a limited number of CQEs,
thanks to the poll budget added by commit 8301a2c047
("xprtrdma: Limit work done by completion handler").
Fixes: a7bc211ac9 ("xprtrdma: On disconnect, don't ignore ... ")
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=276
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Restore the separate function that schedules the reply handling
tasklet. I need to call it from two different paths.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When using RPCRDMA_MTHCAFMR memory registration, after a few
transport disconnect / reconnect cycles, ib_map_phys_fmr() starts to
return EINVAL because the provider has exhausted its map pool.
Make sure that all FMRs are unmapped during transport disconnect,
and that ->send_request remarshals them during an RPC retransmit.
This resets the transport's MRs to ensure that none are leaked
during a disconnect.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Recent work made FRMR registration and invalidation completions
unsignaled. This greatly reduces the adapter interrupt rate.
Every so often, however, a posted send Work Request is allowed to
signal. Otherwise, the provider's Work Queue will wrap and the
workload will hang.
The number of Work Requests that are allowed to remain unsignaled is
determined by the value of req_cqinit. Currently, this is set to the
size of the send Work Queue divided by two, minus 1.
For FRMR, the send Work Queue is the maximum number of concurrent
RPCs (currently 32) times the maximum number of Work Requests an
RPC might use (currently 7, though some adapters may need more).
For mlx4, this is 224 entries. This leaves completion signaling
disabled for 111 send Work Requests.
Some providers hold back dispatching Work Requests until a CQE is
generated. If completions are disabled, then no CQEs are generated
for quite some time, and that can stall the Work Queue.
I've seen this occur running xfstests generic/113 over NFSv4, where
eventually, posting a FAST_REG_MR Work Request fails with -ENOMEM
because the Work Queue has overflowed. The connection is dropped
and re-established.
Cap the rep_cqinit setting so completions are not left turned off
for too long.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=269
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The RPC/RDMA send_request method and the chunk registration code
expects an errno from the registration function. This allows
the upper layers to distinguish between a recoverable failure
(for example, temporary memory exhaustion) and a hard failure
(for example, a bug in the registration logic).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
It's always set to the same value as CONFIG_TRACEPOINTS, so we can just
use that instead.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
It's always set to whatever CONFIG_SUNRPC_DEBUG is, so just use that.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Add tracepoints inside the main loop on xs_tcp_data_recv that allow
us to keep an eye on what's happening during each phase of it.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
...so we can keep track of when calls are sent and replies received.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
...just around svc_send, svc_recv and svc_process for now.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Both xprt_lookup_rqst() and xprt_complete_rqst() require that you
take the transport lock in order to avoid races with xprt_transmit().
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The m->pool_to[] array has "maxpools" number of elements. It's
allocated in svc_pool_map_alloc_arrays() which we called earlier in the
function. This test should be >= instead of >.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Thanks to Andrea Arcangeli for pointing out these checks are
obviously unnecessary given the preceding calculations.
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull nfsd updates from Bruce Fields:
"Highlights:
- support the NFSv4.2 SEEK operation (allowing clients to support
SEEK_HOLE/SEEK_DATA), thanks to Anna.
- end the grace period early in a number of cases, mitigating a
long-standing annoyance, thanks to Jeff
- improve SMP scalability, thanks to Trond"
* 'for-3.18' of git://linux-nfs.org/~bfields/linux: (55 commits)
nfsd: eliminate "to_delegation" define
NFSD: Implement SEEK
NFSD: Add generic v4.2 infrastructure
svcrdma: advertise the correct max payload
nfsd: introduce nfsd4_callback_ops
nfsd: split nfsd4_callback initialization and use
nfsd: introduce a generic nfsd4_cb
nfsd: remove nfsd4_callback.cb_op
nfsd: do not clear rpc_resp in nfsd4_cb_done_sequence
nfsd: fix nfsd4_cb_recall_done error handling
nfsd4: clarify how grace period ends
nfsd4: stop grace_time update at end of grace period
nfsd: skip subsequent UMH "create" operations after the first one for v4.0 clients
nfsd: set and test NFSD4_CLIENT_STABLE bit to reduce nfsdcltrack upcalls
nfsd: serialize nfsdcltrack upcalls for a particular client
nfsd: pass extra info in env vars to upcalls to allow for early grace period end
nfsd: add a v4_end_grace file to /proc/fs/nfsd
lockd: add a /proc/fs/lockd/nlm_end_grace file
nfsd: reject reclaim request when client has already sent RECLAIM_COMPLETE
nfsd: remove redundant boot_time parm from grace_done client tracking op
...
Svcrdma currently advertises 1MB, which is too large. The correct value
is the minimum of RPCSVC_MAXPAYLOAD and the max scatter-gather allowed
in an NFSRDMA IO chunk * the host page size. This bug is usually benign
because the Linux X64 NFSRDMA client correctly limits the payload size to
the correct value (64*4096 = 256KB). But if the Linux client is PPC64
with a 64KB page size, then the client will indeed use a payload size
that will overflow the server.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The flag RPC_CLNT_CREATE_NO_RETRANS_TIMEOUT was intended introduced in
order to allow NFSv4 clients to disable resend timeouts. Since those
cause the RPC layer to break the connection, they mess up the duplicate
reply caches that remain indexed on the port number in NFSv4..
This patch includes the code that was missing in the original to
set the appropriate flag in struct rpc_clnt, when the caller of
rpc_create() sets RPC_CLNT_CREATE_NO_RETRANS_TIMEOUT.
Fixes: 8a19a0b6cb (SUNRPC: Add RPC task and client level options to...)
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Now that nfs_release_page() doesn't block indefinitely, other deadlock
avoidance mechanisms aren't needed.
- it doesn't hurt for kswapd to block occasionally. If it doesn't
want to block it would clear __GFP_WAIT. The current_is_kswapd()
was only added to avoid deadlocks and we have a new approach for
that.
- memory allocation in the SUNRPC layer can very rarely try to
->releasepage() a page it is trying to handle. The deadlock
is removed as nfs_release_page() doesn't block indefinitely.
So we don't need to set PF_FSTRANS for sunrpc network operations any
more.
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If an iptables drop rule is added for an nfs server, the client can end up in
a softlockup. Because of the way that xs_sendpages() is structured, the -EPERM
is ignored since the prior bits of the packet may have been successfully queued
and thus xs_sendpages() returns a non-zero value. Then, xs_udp_send_request()
thinks that because some bits were queued it should return -EAGAIN. We then try
the request again and again, resulting in cpu spinning. Reproducer:
1) open a file on the nfs server '/nfs/foo' (mounted using udp)
2) iptables -A OUTPUT -d <nfs server ip> -j DROP
3) write to /nfs/foo
4) close /nfs/foo
5) iptables -D OUTPUT -d <nfs server ip> -j DROP
The softlockup occurs in step 4 above.
The previous patch, allows xs_sendpages() to return both a sent count and
any error values that may have occurred. Thus, if we get an -EPERM, return
that to the higher level code.
With this patch in place we can successfully abort the above sequence and
avoid the softlockup.
I also tried the above test case on an nfs mount on tcp and although the system
does not softlockup, I still ended up with the 'hung_task' firing after 120
seconds, due to the i/o being stuck. The tcp case appears a bit harder to fix,
since -EPERM appears to get ignored much lower down in the stack and does not
propogate up to xs_sendpages(). This case is not quite as insidious as the
softlockup and it is not addressed here.
Reported-by: Yigong Lou <ylou@akamai.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If an error is returned after the first bits of a packet have already been
successfully queued, xs_sendpages() will return a positive 'int' value
indicating success. Callers seem to treat this as -EAGAIN.
However, there are cases where its not a question of waiting for the write
queue to drain. For example, when there is an iptables rule dropping packets
to the destination, the lower level code can return -EPERM only after parts
of the packet have been successfully queued. In this case, we can end up
continuously retrying resulting in a kernel softlockup.
This patch is intended to make no changes in behavior but is in preparation for
subsequent patches that can make decisions based on both on the number of bytes
sent by xs_sendpages() and any errors that may have be returned.
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When aborting a connection to preserve source ports, don't wake the task in
xs_error_report. This allows tasks with RPC_TASK_SOFTCONN to succeed if the
connection needs to be re-established since it preserves the task's status
instead of setting it to the status of the aborting kernel_connect().
This may also avoid a potential conflict on the socket's lock.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When attempting to establish a local ephemeral endpoint for a TCP or UDP
socket, do not explicitly call bind, instead let it happen implicilty when the
socket is first used.
The main motivating factor for this change is when TCP runs out of unique
ephemeral ports (i.e. cannot find any ephemeral ports which are not a part of
*any* TCP connection). In this situation if you explicitly call bind, then the
call will fail with EADDRINUSE. However, if you allow the allocation of an
ephemeral port to happen implicitly as part of connect (or other functions),
then ephemeral ports can be reused, so long as the combination of (local_ip,
local_port, remote_ip, remote_port) is unique for TCP sockets on the system.
This doesn't matter for UDP sockets, but it seemed easiest to treat TCP and UDP
sockets the same.
This can allow mount.nfs(8) to continue to function successfully, even in the
face of misbehaving applications which are creating a large number of TCP
connections.
Signed-off-by: Chris Perl <chris.perl@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
xprt_lookup_rqst() and bc_send_request() display a byte-swapped XID,
but receive_cb_reply() does not.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
current_task appears to be x86-only, oops.
Let's just delete this check entirely:
Any developer that adds a new user without setting rq_task will get a
crash the first time they test it. I also don't think there are
normally any important locks held here, and I can't see any other reason
why killing a server thread would bring the whole box down.
So the effort to fail gracefully here looks like overkill.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 983c684466 "SUNRPC: get rid of the request wait queue"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We really do not want to do ioctls in the server's fast path. Instead, let's
use the fact that we managed to read a full record as the indicator that
we should try to read the socket again.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Just move the transport locking out of the spin lock protected area
altogether.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We should definitely not be exiting svc_get_next_xprt() with the
thread enqueued. Fix this by ensuring that we fall through to
the dequeue.
Also move the test itself outside the spin lock protected section.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We're always _only_ waking up tasks from within the sp_threads list, so
we know that they are enqueued and alive. The rq_wait waitqueue is just
a distraction with extra atomic semantics.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We already determined that there was enough wspace when we
called svc_xprt_enqueue.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Highlights include:
- Stable fix for a bug in nfs3_list_one_acl()
- Speed up NFS path walks by supporting LOOKUP_RCU
- More read/write code cleanups
- pNFS fixes for layout return on close
- Fixes for the RCU handling in the rpcsec_gss code
- More NFS/RDMA fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJT65zoAAoJEGcL54qWCgDyvq8QAJ+OKuC5dpngrZ13i4ZJIcK1
TJSkWCr44FhYPlrmkLCntsGX6C0376oFEtJ5uqloqK0+/QtvwRNVSQMKaJopKIVY
mR4En0WwpigxVQdW2lgto6bfOhzMVO+llVdmicEVrU8eeSThATxGNv7rxRzWorvL
RX3TwBkWSc0kLtPi66VRFQ1z+gg5I0kngyyhsKnLOaHHtpTYP2JDZlRPRkokXPUg
nmNedmC3JrFFkarroFIfYr54Qit2GW/eI2zVhOwHGCb45j4b2wntZ6wr7LpUdv3A
OGDBzw59cTpcx3Hij9CFvLYVV9IJJHBNd2MJqdQRtgWFfs+aTkZdk4uilUJCIzZh
f4BujQAlm/4X1HbPxsSvkCRKga7mesGM7e0sBDPHC1vu0mSaY1cakcj2kQLTpbQ7
gqa1cR3pZ+4shCq37cLwWU0w1yElYe1c4otjSCttPCrAjXbXJZSFzYnHm8DwKROR
t+yEDRL5BIXPu1nEtSnD2+xTQ3vUIYXooZWEmqLKgRtBTtPmgSn9Vd8P1OQXmMNo
VJyFXyjNx5WH06Wbc/jLzQ1/cyhuPmJWWyWMJlVROyv+FXk9DJUFBZuTkpMrIPcF
NlBXLV1GnA7PzMD9Xt9bwqteERZl6fOUDJLWS9P74kTk5c2kD+m+GaqC/rBTKKXc
ivr2s7aIDV48jhnwBSVL
=KE07
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.17-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
- stable fix for a bug in nfs3_list_one_acl()
- speed up NFS path walks by supporting LOOKUP_RCU
- more read/write code cleanups
- pNFS fixes for layout return on close
- fixes for the RCU handling in the rpcsec_gss code
- more NFS/RDMA fixes"
* tag 'nfs-for-3.17-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (79 commits)
nfs: reject changes to resvport and sharecache during remount
NFS: Avoid infinite loop when RELEASE_LOCKOWNER getting expired error
SUNRPC: remove all refcounting of groupinfo from rpcauth_lookupcred
NFS: fix two problems in lookup_revalidate in RCU-walk
NFS: allow lockless access to access_cache
NFS: teach nfs_lookup_verify_inode to handle LOOKUP_RCU
NFS: teach nfs_neg_need_reval to understand LOOKUP_RCU
NFS: support RCU_WALK in nfs_permission()
sunrpc/auth: allow lockless (rcu) lookup of credential cache.
NFS: prepare for RCU-walk support but pushing tests later in code.
NFS: nfs4_lookup_revalidate: only evaluate parent if it will be used.
NFS: add checks for returned value of try_module_get()
nfs: clear_request_commit while holding i_lock
pnfs: add pnfs_put_lseg_async
pnfs: find swapped pages on pnfs commit lists too
nfs: fix comment and add warn_on for PG_INODE_REF
nfs: check wait_on_bit_lock err in page_group_lock
sunrpc: remove "ec" argument from encrypt_v2 operation
sunrpc: clean up sparse endianness warnings in gss_krb5_wrap.c
sunrpc: clean up sparse endianness warnings in gss_krb5_seal.c
...
Pull nfsd updates from Bruce Fields:
"This includes a major rewrite of the NFSv4 state code, which has
always depended on a single mutex. As an example, open creates are no
longer serialized, fixing a performance regression on NFSv3->NFSv4
upgrades. Thanks to Jeff, Trond, and Benny, and to Christoph for
review.
Also some RDMA fixes from Chuck Lever and Steve Wise, and
miscellaneous fixes from Kinglong Mee and others"
* 'for-3.17' of git://linux-nfs.org/~bfields/linux: (167 commits)
svcrdma: remove rdma_create_qp() failure recovery logic
nfsd: add some comments to the nfsd4 object definitions
nfsd: remove the client_mutex and the nfs4_lock/unlock_state wrappers
nfsd: remove nfs4_lock_state: nfs4_state_shutdown_net
nfsd: remove nfs4_lock_state: nfs4_laundromat
nfsd: Remove nfs4_lock_state(): reclaim_complete()
nfsd: Remove nfs4_lock_state(): setclientid, setclientid_confirm, renew
nfsd: Remove nfs4_lock_state(): exchange_id, create/destroy_session()
nfsd: Remove nfs4_lock_state(): nfsd4_open and nfsd4_open_confirm
nfsd: Remove nfs4_lock_state(): nfsd4_delegreturn()
nfsd: Remove nfs4_lock_state(): nfsd4_open_downgrade + nfsd4_close
nfsd: Remove nfs4_lock_state(): nfsd4_lock/locku/lockt()
nfsd: Remove nfs4_lock_state(): nfsd4_release_lockowner
nfsd: Remove nfs4_lock_state(): nfsd4_test_stateid/nfsd4_free_stateid
nfsd: Remove nfs4_lock_state(): nfs4_preprocess_stateid_op()
nfsd: remove old fault injection infrastructure
nfsd: add more granular locking to *_delegations fault injectors
nfsd: add more granular locking to forget_openowners fault injector
nfsd: add more granular locking to forget_locks fault injector
nfsd: add a list_head arg to nfsd_foreach_client_lock
...
In svc_rdma_accept(), if rdma_create_qp() fails, there is useless
logic to try and call rdma_create_qp() again with reduced sge depths.
The assumption, I guess, was that perhaps the initial sge depths
chosen were too big. However they initial depths are selected based
on the rdma device attribute max_sge returned from ib_query_device().
If rdma_create_qp() fails, it would not be because the max_send_sge and
max_recv_sge values passed in exceed the device's max. So just remove
this code.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
current_cred() can only be changed by 'current', and
cred->group_info is never changed. If a new group_info is
needed, a new 'cred' is created.
Consequently it is always safe to access
current_cred()->group_info
without taking any further references.
So drop the refcounting and the incorrect rcu_dereference().
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The new flag RPCAUTH_LOOKUP_RCU to credential lookup avoids locking,
does not take a reference on the returned credential, and returns
-ECHILD if a simple lookup was not possible.
The returned value can only be used within an rcu_read_lock protected
region.
The main user of this is the new rpc_lookup_cred_nonblock() which
returns a pointer to the current credential which is only rcu-safe (no
ref-count held), and might return -ECHILD if allocation was required.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Fix the endianness handling in gss_wrap_kerberos_v1 and drop the memset
call there in favor of setting the filler bytes directly.
In gss_wrap_kerberos_v2, get rid of the "ec" variable which is always
zero, and drop the endianness conversion of 0. Sparse handles 0 as a
special case, so it's not necessary.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Use u16 pointer in setup_token and setup_token_v2. None of the fields
are actually handled as __be16, so this simplifies the code a bit. Also
get rid of some unneeded pointer increments.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The handling of the gc_ctx pointer only seems to be partially RCU-safe.
The assignment and freeing are done using RCU, but many places in the
code seem to dereference that pointer without proper RCU safeguards.
Fix them to use rcu_dereference and to rcu_read_lock/unlock, and to
properly handle the case where the pointer is NULL.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
* 'nfs-rdma' of git://git.linux-nfs.org/projects/anna/nfs-rdma: (916 commits)
xprtrdma: Handle additional connection events
xprtrdma: Remove RPCRDMA_PERSISTENT_REGISTRATION macro
xprtrdma: Make rpcrdma_ep_disconnect() return void
xprtrdma: Schedule reply tasklet once per upcall
xprtrdma: Allocate each struct rpcrdma_mw separately
xprtrdma: Rename frmr_wr
xprtrdma: Disable completions for LOCAL_INV Work Requests
xprtrdma: Disable completions for FAST_REG_MR Work Requests
xprtrdma: Don't post a LOCAL_INV in rpcrdma_register_frmr_external()
xprtrdma: Reset FRMRs after a flushed LOCAL_INV Work Request
xprtrdma: Reset FRMRs when FAST_REG_MR is flushed by a disconnect
xprtrdma: Properly handle exhaustion of the rb_mws list
xprtrdma: Chain together all MWs in same buffer pool
xprtrdma: Back off rkey when FAST_REG_MR fails
xprtrdma: Unclutter struct rpcrdma_mr_seg
xprtrdma: Don't invalidate FRMRs if registration fails
xprtrdma: On disconnect, don't ignore pending CQEs
xprtrdma: Update rkeys after transport reconnect
xprtrdma: Limit data payload size for ALLPHYSICAL
xprtrdma: Protect ia->ri_id when unmapping/invalidating MRs
...
In some cases where the credentials are not often reused, we may want
to limit their total number just in order to make the negative lookups
in the hash table more manageable.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Commit 38ca83a5 added RDMA_CM_EVENT_TIMEWAIT_EXIT. But that status
is relevant only for consumers that re-use their QPs on new
connections. xprtrdma creates a fresh QP on reconnection, so that
event should be explicitly ignored.
Squelch the alarming "unexpected CM event" message.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
RPCRDMA_PERSISTENT_REGISTRATION was a compile-time switch between
RPCRDMA_REGISTER mode and RPCRDMA_ALLPHYSICAL mode. Since
RPCRDMA_REGISTER has been removed, there's no need for the extra
conditional compilation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: The return code is used only for dprintk's that are
already redundant.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Minor optimization: grab rpcrdma_tk_lock_g and disable hard IRQs
just once after clearing the receive completion queue.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Currently rpcrdma_buffer_create() allocates struct rpcrdma_mw's as
a single contiguous area of memory. It amounts to quite a bit of
memory, and there's no requirement for these to be carved from a
single piece of contiguous memory.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Name frmr_wr after the opcode of the Work Request,
consistent with the send and local invalidation paths.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Instead of relying on a completion to change the state of an FRMR
to FRMR_IS_INVALID, set it in advance. If an error occurs, a completion
will fire anyway and mark the FRMR FRMR_IS_STALE.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Instead of relying on a completion to change the state of an FRMR
to FRMR_IS_VALID, set it in advance. If an error occurs, a completion
will fire anyway and mark the FRMR FRMR_IS_STALE.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Any FRMR arriving in rpcrdma_register_frmr_external() is now
guaranteed to be either invalid, or to be targeted by a queued
LOCAL_INV that will invalidate it before the adapter processes
the FAST_REG_MR being built here.
The problem with current arrangement of chaining a LOCAL_INV to the
FAST_REG_MR is that if the transport is not connected, the LOCAL_INV
is flushed and the FAST_REG_MR is flushed. This leaves the FRMR
valid with the old rkey. But rpcrdma_register_frmr_external() has
already bumped the in-memory rkey.
Next time through rpcrdma_register_frmr_external(), a LOCAL_INV and
FAST_REG_MR is attempted again because the FRMR is still valid. But
the rkey no longer matches the hardware's rkey, and a memory
management operation error occurs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When a LOCAL_INV Work Request is flushed, it leaves an FRMR in the
VALID state. This FRMR can be returned by rpcrdma_buffer_get(), and
must be knocked down in rpcrdma_register_frmr_external() before it
can be re-used.
Instead, capture these in rpcrdma_buffer_get(), and reset them.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
FAST_REG_MR Work Requests update a Memory Region's rkey. Rkey's are
used to block unwanted access to the memory controlled by an MR. The
rkey is passed to the receiver (the NFS server, in our case), and is
also used by xprtrdma to invalidate the MR when the RPC is complete.
When a FAST_REG_MR Work Request is flushed after a transport
disconnect, xprtrdma cannot tell whether the WR actually hit the
adapter or not. So it is indeterminant at that point whether the
existing rkey is still valid.
After the transport connection is re-established, the next
FAST_REG_MR or LOCAL_INV Work Request against that MR can sometimes
fail because the rkey value does not match what xprtrdma expects.
The only reliable way to recover in this case is to deregister and
register the MR before it is used again. These operations can be
done only in a process context, so handle it in the transport
connect worker.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the rb_mws list is exhausted, clean up and return NULL so that
call_allocate() will delay and try again.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
During connection loss recovery, need to visit every MW in a
buffer pool. Any MW that is in use by an RPC will not be on the
rb_mws list.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If posting a FAST_REG_MR Work Reqeust fails, revert the rkey update
to avoid subsequent IB_WC_MW_BIND_ERR completions.
Suggested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean ups:
- make it obvious that the rl_mw field is a pointer -- allocated
separately, not as part of struct rpcrdma_mr_seg
- promote "struct {} frmr;" to a named type
- promote the state enum to a named type
- name the MW state field the same way other fields in
rpcrdma_mw are named
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If FRMR registration fails, it's likely to transition the QP to the
error state. Or, registration may have failed because the QP is
_already_ in ERROR.
Thus calling rpcrdma_deregister_external() in
rpcrdma_create_chunks() is useless in FRMR mode: the LOCAL_INVs just
get flushed.
It is safe to leave existing registrations: when FRMR registration
is tried again, rpcrdma_register_frmr_external() checks if each FRMR
is already/still VALID, and knocks it down first if it is.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
xprtrdma is currently throwing away queued completions during
a reconnect. RPC replies posted just before connection loss, or
successful completions that change the state of an FRMR, can be
missed.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Various reports of:
rpcrdma_qp_async_error_upcall: QP error 3 on device mlx4_0
ep ffff8800bfd3e848
Ensure that rkeys in already-marshalled RPC/RDMA headers are
refreshed after the QP has been replaced by a reconnect.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=249
Suggested-by: Selvin Xavier <Selvin.Xavier@Emulex.Com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When the client uses physical memory registration, each page in the
payload gets its own array entry in the RPC/RDMA header's chunk list.
Therefore, don't advertise a maximum payload size that would require
more array entries than can fit in the RPC buffer where RPC/RDMA
headers are built.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=248
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Ensure ia->ri_id remains valid while invoking dma_unmap_page() or
posting LOCAL_INV during a transport reconnect. Otherwise,
ia->ri_id->device or ia->ri_id->qp is NULL, which triggers a panic.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=259
Fixes: ec62f40 'xprtrdma: Ensure ia->ri_id->qp is not NULL when reconnecting'
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
seg1->mr_nsegs is not yet initialized when it is used to unmap
segments during an error exit. Use the same unmapping logic for
all error exits.
"if (frmr_wr.wr.fast_reg.length < len) {" used to be a BUG_ON check.
The broken code will never be executed under normal operation.
Fixes: c977dea (xprtrdma: Remove BUG_ON() call sites)
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Shirley Ma <shirley.ma@oracle.com>
Tested-by: Devesh Sharma <devesh.sharma@emulex.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If requests are queued in the socket inbuffer waiting for an
svc_tcp_has_wspace() requirement to be satisfied, then we do not want
to clear the SOCK_NOSPACE flag until we've satisfied that requirement.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Ensure that all calls to svc_xprt_enqueue() except svc_xprt_received()
check the value of XPT_BUSY, before attempting to grab spinlocks etc.
This is to avoid situations such as the following "perf" trace,
which shows heavy contention on the pool spinlock:
54.15% nfsd [kernel.kallsyms] [k] _raw_spin_lock_bh
|
--- _raw_spin_lock_bh
|
|--71.43%-- svc_xprt_enqueue
| |
| |--50.31%-- svc_reserve
| |
| |--31.35%-- svc_xprt_received
| |
| |--18.34%-- svc_tcp_data_ready
...
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
See RFC 5666 section 3.7: clients don't have to send zero XDR
padding.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=246
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The current code always selects XPRT_TRANSPORT_BC_TCP for the back
channel, even when the forward channel was not TCP (eg, RDMA). When
a 4.1 mount is attempted with RDMA, the server panics in the TCP BC
code when trying to send CB_NULL.
Instead, construct the transport protocol number from the forward
channel transport or'd with XPRT_TRANSPORT_BC. Transports that do
not support bi-directional RPC will not have registered a "BC"
transport, causing create_backchannel_client() to fail immediately.
Fixes: https://bugzilla.linux-nfs.org/show_bug.cgi?id=265
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It is currently not possible for various wait_on_bit functions
to implement a timeout.
While the "action" function that is called to do the waiting
could certainly use schedule_timeout(), there is no way to carry
forward the remaining timeout after a false wake-up.
As false-wakeups a clearly possible at least due to possible
hash collisions in bit_waitqueue(), this is a real problem.
The 'action' function is currently passed a pointer to the word
containing the bit being waited on. No current action functions
use this pointer. So changing it to something else will be a
little noisy but will have no immediate effect.
This patch changes the 'action' function to take a pointer to
the "struct wait_bit_key", which contains a pointer to the word
containing the bit so nothing is really lost.
It also adds a 'private' field to "struct wait_bit_key", which
is initialized to zero.
An action function can now implement a timeout with something
like
static int timed_out_waiter(struct wait_bit_key *key)
{
unsigned long waited;
if (key->private == 0) {
key->private = jiffies;
if (key->private == 0)
key->private -= 1;
}
waited = jiffies - key->private;
if (waited > 10 * HZ)
return -EAGAIN;
schedule_timeout(waited - 10 * HZ);
return 0;
}
If any other need for context in a waiter were found it would be
easy to use ->private for some other purpose, or even extend
"struct wait_bit_key".
My particular need is to support timeouts in nfs_release_page()
to avoid deadlocks with loopback mounted NFS.
While wait_on_bit_timeout() would be a cleaner interface, it
will not meet my need. I need the timeout to be sensitive to
the state of the connection with the server, which could change.
So I need to use an 'action' interface.
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Steve French <sfrench@samba.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/20140707051604.28027.41257.stgit@notabene.brown
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Drop cast on the result of kmalloc and similar functions.
The semantic patch that makes this change is as follows:
// <smpl>
@@
type T;
@@
- (T *)
(\(kmalloc\|kzalloc\|kcalloc\|kmem_cache_alloc\|kmem_cache_zalloc\|
kmem_cache_alloc_node\|kmalloc_node\|kzalloc_node\)(...))
// </smpl>
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
...and add an new rpc_auth function to call it when it exists. This
is only applicable for AUTH_GSS mechanisms, so we only specify this
for those sorts of credentials.
Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If rpc.gssd sends us an acceptor name string trailing the context token,
stash it as part of the context.
Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Function send_write() must stop creating sges when it reaches the device
max and return the amount sent in the RDMA Write to the caller.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The callback handler xs_error_report() can end up propagating an EPIPE
error by means of the call to xprt_wake_pending_tasks(). Ensure that
xprt_connect_status() does not automatically convert this into an
EIO error.
Reported-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Currently, an ENOBUFS error will result in a fatal error for the RPC
call. Normally, we will just want to wait and then retry.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Fix nfs4_negotiate_security to create an rpc_clnt used to test each SECINFO
returned pseudoflavor. Check credential creation (and gss_context creation)
which is important for RPC_AUTH_GSS pseudoflavors which can fail for multiple
reasons including mis-configuration.
Don't call nfs4_negotiate in nfs4_submount as it was just called by
nfs4_proc_lookup_mountpoint (nfs4_proc_lookup_common)
Signed-off-by: Andy Adamson <andros@netapp.com>
[Trond: fix corrupt return value from nfs_find_best_sec()]
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
rq_usedeferral and rq_splice_ok are used as 0 and 1, just defined to bool.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull networking updates from David Miller:
1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov.
2) Multiqueue support in xen-netback and xen-netfront, from Andrew J
Benniston.
3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn
Mork.
4) BPF now has a "random" opcode, from Chema Gonzalez.
5) Add more BPF documentation and improve test framework, from Daniel
Borkmann.
6) Support TCP fastopen over ipv6, from Daniel Lee.
7) Add software TSO helper functions and use them to support software
TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia.
8) Support software TSO in fec driver too, from Nimrod Andy.
9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli.
10) Handle broadcasts more gracefully over macvlan when there are large
numbers of interfaces configured, from Herbert Xu.
11) Allow more control over fwmark used for non-socket based responses,
from Lorenzo Colitti.
12) Do TCP congestion window limiting based upon measurements, from Neal
Cardwell.
13) Support busy polling in SCTP, from Neal Horman.
14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru.
15) Bridge promisc mode handling improvements from Vlad Yasevich.
16) Don't use inetpeer entries to implement ID generation any more, it
performs poorly, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits)
rtnetlink: fix userspace API breakage for iproute2 < v3.9.0
tcp: fixing TLP's FIN recovery
net: fec: Add software TSO support
net: fec: Add Scatter/gather support
net: fec: Increase buffer descriptor entry number
net: fec: Factorize feature setting
net: fec: Enable IP header hardware checksum
net: fec: Factorize the .xmit transmit function
bridge: fix compile error when compiling without IPv6 support
bridge: fix smatch warning / potential null pointer dereference
via-rhine: fix full-duplex with autoneg disable
bnx2x: Enlarge the dorq threshold for VFs
bnx2x: Check for UNDI in uncommon branch
bnx2x: Fix 1G-baseT link
bnx2x: Fix link for KR with swapped polarity lane
sctp: Fix sk_ack_backlog wrap-around problem
net/core: Add VF link state control policy
net/fsl: xgmac_mdio is dependent on OF_MDIO
net/fsl: Make xgmac_mdio read error message useful
net_sched: drr: warn when qdisc is not work conserving
...
In skb_checksum complete, if we need to compute the checksum for the
packet (via skb_checksum) save the result as CHECKSUM_COMPLETE.
Subsequent checksum verification can use this.
Also, added csum_complete_sw flag to distinguish between software and
hardware generated checksum complete, we should always be able to trust
the software computation.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Highlights include:
- Massive cleanup of the NFS read/write code by Anna and Dros
- Support multiple NFS read/write requests per page in order to deal with
non-page aligned pNFS striping. Also cleans up the r/wsize < page size
code nicely.
- stable fix for ensuring inode is declared uptodate only after all the
attributes have been checked.
- stable fix for a kernel Oops when remounting
- NFS over RDMA client fixes
- move the pNFS files layout driver into its own subdirectory
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=OyXR
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
- massive cleanup of the NFS read/write code by Anna and Dros
- support multiple NFS read/write requests per page in order to deal
with non-page aligned pNFS striping. Also cleans up the r/wsize <
page size code nicely.
- stable fix for ensuring inode is declared uptodate only after all
the attributes have been checked.
- stable fix for a kernel Oops when remounting
- NFS over RDMA client fixes
- move the pNFS files layout driver into its own subdirectory"
* tag 'nfs-for-3.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (79 commits)
NFS: populate ->net in mount data when remounting
pnfs: fix lockup caused by pnfs_generic_pg_test
NFSv4.1: Fix typo in dprintk
NFSv4.1: Comment is now wrong and redundant to code
NFS: Use raw_write_seqcount_begin/end int nfs4_reclaim_open_state
xprtrdma: Disconnect on registration failure
xprtrdma: Remove BUG_ON() call sites
xprtrdma: Avoid deadlock when credit window is reset
SUNRPC: Move congestion window constants to header file
xprtrdma: Reset connection timeout after successful reconnect
xprtrdma: Use macros for reconnection timeout constants
xprtrdma: Allocate missing pagelist
xprtrdma: Remove Tavor MTU setting
xprtrdma: Ensure ia->ri_id->qp is not NULL when reconnecting
xprtrdma: Reduce the number of hardway buffer allocations
xprtrdma: Limit work done by completion handler
xprtrmda: Reduce calls to ib_poll_cq() in completion handlers
xprtrmda: Reduce lock contention in completion handlers
xprtrdma: Split the completion queue
xprtrdma: Make rpcrdma_ep_destroy() return void
...
Pull nfsd updates from Bruce Fields:
"The largest piece is a long-overdue rewrite of the xdr code to remove
some annoying limitations: for example, there was no way to return
ACLs larger than 4K, and readdir results were returned only in 4k
chunks, limiting performance on large directories.
Also:
- part of Neil Brown's work to make NFS work reliably over the
loopback interface (so client and server can run on the same
machine without deadlocks). The rest of it is coming through
other trees.
- cleanup and bugfixes for some of the server RDMA code, from
Steve Wise.
- Various cleanup of NFSv4 state code in preparation for an
overhaul of the locking, from Jeff, Trond, and Benny.
- smaller bugfixes and cleanup from Christoph Hellwig and
Kinglong Mee.
Thanks to everyone!
This summer looks likely to be busier than usual for knfsd. Hopefully
we won't break it too badly; testing definitely welcomed"
* 'for-3.16' of git://linux-nfs.org/~bfields/linux: (100 commits)
nfsd4: fix FREE_STATEID lockowner leak
svcrdma: Fence LOCAL_INV work requests
svcrdma: refactor marshalling logic
nfsd: don't halt scanning the DRC LRU list when there's an RC_INPROG entry
nfs4: remove unused CHANGE_SECURITY_LABEL
nfsd4: kill READ64
nfsd4: kill READ32
nfsd4: simplify server xdr->next_page use
nfsd4: hash deleg stateid only on successful nfs4_set_delegation
nfsd4: rename recall_lock to state_lock
nfsd: remove unneeded zeroing of fields in nfsd4_proc_compound
nfsd: fix setting of NFS4_OO_CONFIRMED in nfsd4_open
nfsd4: use recall_lock for delegation hashing
nfsd: fix laundromat next-run-time calculation
nfsd: make nfsd4_encode_fattr static
SUNRPC/NFSD: Remove using of dprintk with KERN_WARNING
nfsd: remove unused function nfsd_read_file
nfsd: getattr for FATTR4_WORD0_FILES_AVAIL needs the statfs buffer
NFSD: Error out when getting more than one fsloc/secinfo/uuid
NFSD: Using type of uint32_t for ex_nflavors instead of int
...
Fencing forces the invalidate to only happen after all prior send
work requests have been completed.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reported by : Devesh Sharma <Devesh.Sharma@Emulex.Com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch refactors the NFSRDMA server marshalling logic to
remove the intermediary map structures. It also fixes an existing bug
where the NFSRDMA server was not minding the device fast register page
list length limitations.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
The rpc code makes available to the NFS server an array of pages to
encod into. The server represents its reply as an xdr buf, with the
head pointing into the first page in that array, the pages ** array
starting just after that, and the tail (if any) sharing any leftover
space in the page used by the head.
While encoding, we use xdr_stream->page_ptr to keep track of which page
we're currently using.
Currently we set xdr_stream->page_ptr to buf->pages, which makes the
head a weird exception to the rule that page_ptr always points to the
page we're currently encoding into. So, instead set it to buf->pages -
1 (the page actually containing the head), and remove the need for a
little unintuitive logic in xdr_get_next_encode_buffer() and
xdr_truncate_encode.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If rpcrdma_register_external() fails during request marshaling, the
current RPC request is killed. Instead, this RPC should be retried
after reconnecting the transport instance.
The most likely reason for registration failure with FRMR is a
failed post_send, which would be due to a remote transport
disconnect or memory exhaustion. These issues can be recovered
by a retry.
Problems encountered in the marshaling logic itself will not be
corrected by trying again, so these should still kill a request.
Now that we've added a clean exit for marshaling errors, take the
opportunity to defang some BUG_ON's.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If an error occurs in the marshaling logic, fail the RPC request
being processed, but leave the client running.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Update the cwnd while processing the server's reply. Otherwise the
next task on the xprt_sending queue is still subject to the old
credit window. Currently, no task is awoken if the old congestion
window is still exceeded, even if the new window is larger, and a
deadlock results.
This is an issue during a transport reconnect. Servers don't
normally shrink the credit window, but the client does reset it to
1 when reconnecting so the server can safely grow it again.
As a minor optimization, remove the hack of grabbing the initial
cwnd size (which happens to be RPC_CWNDSCALE) and using that value
as the congestion scaling factor. The scaling value is invariant,
and we are better off without the multiplication operation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
I would like to use one of the RPC client's congestion algorithm
constants in transport-specific code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the new connection is able to make forward progress, reset the
re-establish timeout. Otherwise it keeps growing even if disconnect
events are rare.
The same behavior as TCP is adopted: reconnect immediately if the
transport instance has been able to make some forward progress.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: Ensure the same max and min constant values are used
everywhere when setting reconnect timeouts.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
GETACL relies on transport layer to alloc memory for reply buffer.
However xprtrdma assumes that the reply buffer (pagelist) has been
pre-allocated in upper layer. This problem was reported by IOL OFA lab
test on PPC.
Signed-off-by: Shirley Ma <shirley.ma@oracle.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Edward Mossman <emossman@iol.unh.edu>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up. Remove HCA-specific clutter in xprtrdma, which is
supposed to be device-independent.
Hal Rosenstock <hal@dev.mellanox.co.il> observes:
> Note that there is OpenSM option (enable_quirks) to return 1K MTU
> in SA PathRecord responses for Tavor so that can be used for this.
> The default setting for enable_quirks is FALSE so that would need
> changing.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Devesh Sharma <Devesh.Sharma@Emulex.Com> reports that after a
disconnect, his HCA is failing to create a fresh QP, leaving
ia_ri->ri_id->qp set to NULL. But xprtrdma still allows RPCs to
wake up and post LOCAL_INV as they exit, causing an oops.
rpcrdma_ep_connect() is allowing the wake-up by leaking the QP
creation error code (-EPERM in this case) to the RPC client's
generic layer. xprt_connect_status() does not recognize -EPERM, so
it kills pending RPC tasks immediately rather than retrying the
connect.
Re-arrange the QP creation logic so that when it fails on reconnect,
it leaves ->qp with the old QP rather than NULL. If pending RPC
tasks wake and exit, LOCAL_INV work requests will flush rather than
oops.
On initial connect, leaving ->qp == NULL is OK, since there are no
pending RPCs that might use ->qp. But be sure not to try to destroy
a NULL QP when rpcrdma_ep_connect() is retried.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
While marshaling an RPC/RDMA request, the inline_{rsize,wsize}
settings determine whether an inline request is used, or whether
read or write chunks lists are built. The current default value of
these settings is 1024. Any RPC request smaller than 1024 bytes is
sent to the NFS server completely inline.
rpcrdma_buffer_create() allocates and pre-registers a set of RPC
buffers for each transport instance, also based on the inline rsize
and wsize settings.
RPC/RDMA requests and replies are built in these buffers. However,
if an RPC/RDMA request is expected to be larger than 1024, a buffer
has to be allocated and registered for that RPC, and deregistered
and released when the RPC is complete. This is known has a
"hardway allocation."
Since the introduction of NFSv4, the size of RPC requests has become
larger, and hardway allocations are thus more frequent. Hardway
allocations are significant overhead, and they waste the existing
RPC buffers pre-allocated by rpcrdma_buffer_create().
We'd like fewer hardway allocations.
Increasing the size of the pre-registered buffers is the most direct
way to do this. However, a blanket increase of the inline thresholds
has interoperability consequences.
On my 64-bit system, rpcrdma_buffer_create() requests roughly 7000
bytes for each RPC request buffer, using kmalloc(). Due to internal
fragmentation, this wastes nearly 1200 bytes because kmalloc()
already returns an 8192-byte piece of memory for a 7000-byte
allocation request, though the extra space remains unused.
So let's round up the size of the pre-allocated buffers, and make
use of the unused space in the kmalloc'd memory.
This change reduces the amount of hardway allocated memory for an
NFSv4 general connectathon run from 1322092 to 9472 bytes (99%).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Sagi Grimberg <sagig@dev.mellanox.co.il> points out that a steady
stream of CQ events could starve other work because of the boundless
loop pooling in rpcrdma_{send,recv}_poll().
Instead of a (potentially infinite) while loop, return after
collecting a budgeted number of completions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Sagi Grimberg <sagig@dev.mellanox.co.il>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Change the completion handlers to grab up to 16 items per
ib_poll_cq() call. No extra ib_poll_cq() is needed if fewer than 16
items are returned.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Skip the ib_poll_cq() after re-arming, if the provider knows there
are no additional items waiting. (Have a look at commit ed23a727 for
more details).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The current CQ handler uses the ib_wc.opcode field to distinguish
between event types. However, the contents of that field are not
reliable if the completion status is not IB_WC_SUCCESS.
When an error completion occurs on a send event, the CQ handler
schedules a tasklet with something that is not a struct rpcrdma_rep.
This is never correct behavior, and sometimes it results in a panic.
To resolve this issue, split the completion queue into a send CQ and
a receive CQ. The send CQ handler now handles only struct rpcrdma_mw
wr_id's, and the receive CQ handler now handles only struct
rpcrdma_rep wr_id's.
Fix suggested by Shirley Ma <shirley.ma@oracle.com>
Reported-by: Rafael Reiter <rafael.reiter@ims.co.at>
Fixes: 5c635e09ce
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=73211
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Klemens Senn <klemens.senn@ims.co.at>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: rpcrdma_ep_destroy() returns a value that is used
only to print a debugging message. rpcrdma_ep_destroy() already
prints debugging messages in all error cases.
Make rpcrdma_ep_destroy() return void instead.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: All remaining callers of rpcrdma_deregister_external()
pass NULL as the last argument, so remove that argument.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the selected memory registration mode is not supported by the
underlying provider/HCA, the NFS mount command reports that there was
an invalid mount option, and fails. This is misleading.
Reporting a problem allocating memory is a lot closer to the truth.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
An audit of in-kernel RDMA providers that do not support the FRMR
memory registration shows that several of them support MTHCAFMR.
Prefer MTHCAFMR when FRMR is not supported.
If MTHCAFMR is not supported, only then choose ALLPHYSICAL.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
All kernel RDMA providers except amso1100 support either MTHCAFMR
or FRMR, both of which are faster than REGISTER. amso1100 can
continue to use ALLPHYSICAL.
The only other ULP consumer in the kernel that uses the reg_phys_mr
verb is Lustre.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The MEMWINDOWS and MEMWINDOWS_ASYNC memory registration modes were
intended as stop-gap modes before the introduction of FRMR. They
are now considered obsolete.
MEMWINDOWS_ASYNC is also considered unsafe because it can leave
client memory registered and exposed for an indeterminant time after
each I/O.
At this point, the MEMWINDOWS modes add needless complexity, so
remove them.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: This memory registration mode is slow and was never
meant for use in production environments. Remove it to reduce
implementation complexity.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
An IB provider can invoke rpcrdma_conn_func() in an IRQ context,
thus rpcrdma_conn_func() cannot be allowed to directly invoke
generic RPC functions like xprt_wake_pending_tasks().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Two memory region leaks were found during testing:
1. rpcrdma_buffer_create: While allocating RPCRDMA_FRMR's
ib_alloc_fast_reg_mr is called and then ib_alloc_fast_reg_page_list is
called. If ib_alloc_fast_reg_page_list returns an error it bails out of
the routine dropping the last ib_alloc_fast_reg_mr frmr region creating a
memory leak. Added code to dereg the last frmr if
ib_alloc_fast_reg_page_list fails.
2. rpcrdma_buffer_destroy: While cleaning up, the routine will only free
the MR's on the rb_mws list if there are rb_send_bufs present. However, in
rpcrdma_buffer_create while the rb_mws list is being built if one of the MR
allocation requests fail after some MR's have been allocated on the rb_mws
list the routine never gets to create any rb_send_bufs but instead jumps to
the rpcrdma_buffer_destroy routine which will never free the MR's on rb_mws
list because the rb_send_bufs were never created. This leaks all the MR's
on the rb_mws list that were created prior to one of the MR allocations
failing.
Issue(2) was seen during testing. Our adapter had a finite number of MR's
available and we created enough connections to where we saw an MR
allocation failure on our Nth NFS connection request. After the kernel
cleaned up the resources it had allocated for the Nth connection we noticed
that FMR's had been leaked due to the coding error described above.
Issue(1) was seen during a code review while debugging issue(2).
Signed-off-by: Allen Andrews <allen.andrews@emulex.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Some rdma devices don't support a fast register page list depth of
at least RPCRDMA_MAX_DATA_SEGS. So xprtrdma needs to chunk its fast
register regions according to the minimum of the device max supported
depth or RPCRDMA_MAX_DATA_SEGS.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When debugging, rpc prints messages from dprintk(KERN_WARNING ...)
with "^A4" prefixed,
[ 2780.339988] ^A4nfsd: connect from unprivileged port: 127.0.0.1, port=35316
Trond tells,
> dprintk != printk. We have NEVER supported dprintk(KERN_WARNING...)
This patch removes using of dprintk with KERN_WARNING.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
RPC_MAX_AUTH_SIZE is scattered around several places. Better to set it
once in the auth code, where this kind of estimate should be made. And
while we're at it we can leave it zero when we're not using krb5i or
krb5p.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
After this we can handle for example getattr of very large ACLs.
Read, readdir, readlink are still special cases with their own limits.
Also we can't handle a new operation starting close to the end of a
page.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This will be used in the server side in a few cases:
- when certain operations (read, readdir, readlink) fail after
encoding a partial response.
- when we run out of space after encoding a partial response.
- in readlink, where we initially reserve PAGE_SIZE bytes for
data, then truncate to the actual size.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Setting sk_no_check to UDP_CSUM_NORCV seems to have no effect.
Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If an incoming NFS request is coming from the local host, then
nfsd will need to perform some special handling. So detect that
possibility and make the source visible in rq_local.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If the accept() call fails, we need to put the module reference.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
An NFS/RDMA client's source port is meaningless for RDMA transports.
The transport layer typically sets the source port value on the
connection to a random ephemeral port.
Currently, NFS server administrators must specify the "insecure"
export option to enable clients to access exports via RDMA.
But this means NFS clients can access such an export via IP using an
ephemeral port, which may not be desirable.
This patch eliminates the need to specify the "insecure" export
option to allow NFS/RDMA clients access to an export.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=250
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We're not taking a reference in the case where _gss_mech_get_by_pseudoflavor
loops without finding the correct rpcsec_gss flavour, so why are we
releasing it?
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Pull yet more networking updates from David Miller:
1) Various fixes to the new Redpine Signals wireless driver, from
Fariya Fatima.
2) L2TP PPP connect code takes PMTU from the wrong socket, fix from
Dmitry Petukhov.
3) UFO and TSO packets differ in whether they include the protocol
header in gso_size, account for that in skb_gso_transport_seglen().
From Florian Westphal.
4) If VLAN untagging fails, we double free the SKB in the bridging
output path. From Toshiaki Makita.
5) Several call sites of sk->sk_data_ready() were referencing an SKB
just added to the socket receive queue in order to calculate the
second argument via skb->len. This is dangerous because the moment
the skb is added to the receive queue it can be consumed in another
context and freed up.
It turns out also that none of the sk->sk_data_ready()
implementations even care about this second argument.
So just kill it off and thus fix all these use-after-free bugs as a
side effect.
6) Fix inverted test in tcp_v6_send_response(), from Lorenzo Colitti.
7) pktgen needs to do locking properly for LLTX devices, from Daniel
Borkmann.
8) xen-netfront driver initializes TX array entries in RX loop :-) From
Vincenzo Maffione.
9) After refactoring, some tunnel drivers allow a tunnel to be
configured on top itself. Fix from Nicolas Dichtel.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits)
vti: don't allow to add the same tunnel twice
gre: don't allow to add the same tunnel twice
drivers: net: xen-netfront: fix array initialization bug
pktgen: be friendly to LLTX devices
r8152: check RTL8152_UNPLUG
net: sun4i-emac: add promiscuous support
net/apne: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
net: ipv6: Fix oif in TCP SYN+ACK route lookup.
drivers: net: cpsw: enable interrupts after napi enable and clearing previous interrupts
drivers: net: cpsw: discard all packets received when interface is down
net: Fix use after free by removing length arg from sk_data_ready callbacks.
Drivers: net: hyperv: Address UDP checksum issues
Drivers: net: hyperv: Negotiate suitable ndis version for offload support
Drivers: net: hyperv: Allocate memory for all possible per-pecket information
bridge: Fix double free and memory leak around br_allowed_ingress
bonding: Remove debug_fs files when module init fails
i40evf: program RSS LUT correctly
i40evf: remove open-coded skb_cow_head
ixgb: remove open-coded skb_cow_head
igbvf: remove open-coded skb_cow_head
...
Several spots in the kernel perform a sequence like:
skb_queue_tail(&sk->s_receive_queue, skb);
sk->sk_data_ready(sk, skb->len);
But at the moment we place the SKB onto the socket receive queue it
can be consumed and freed up. So this skb->len access is potentially
to freed up memory.
Furthermore, the skb->len can be modified by the consumer so it is
possible that the value isn't accurate.
And finally, no actual implementation of this callback actually uses
the length argument. And since nobody actually cared about it's
value, lots of call sites pass arbitrary values in such as '0' and
even '1'.
So just remove the length argument from the callback, that way there
is no confusion whatsoever and all of these use-after-free cases get
fixed as a side effect.
Based upon a patch by Eric Dumazet and his suggestion to audit this
issue tree-wide.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull nfsd updates from Bruce Fields:
"Highlights:
- server-side nfs/rdma fixes from Jeff Layton and Tom Tucker
- xdr fixes (a larger xdr rewrite has been posted but I decided it
would be better to queue it up for 3.16).
- miscellaneous fixes and cleanup from all over (thanks especially to
Kinglong Mee)"
* 'for-3.15' of git://linux-nfs.org/~bfields/linux: (36 commits)
nfsd4: don't create unnecessary mask acl
nfsd: revert v2 half of "nfsd: don't return high mode bits"
nfsd4: fix memory leak in nfsd4_encode_fattr()
nfsd: check passed socket's net matches NFSd superblock's one
SUNRPC: Clear xpt_bc_xprt if xs_setup_bc_tcp failed
NFSD/SUNRPC: Check rpc_xprt out of xs_setup_bc_tcp
SUNRPC: New helper for creating client with rpc_xprt
NFSD: Free backchannel xprt in bc_destroy
NFSD: Clear wcc data between compound ops
nfsd: Don't return NFS4ERR_STALE_STATEID for NFSv4.1+
nfsd4: fix nfs4err_resource in 4.1 case
nfsd4: fix setclientid encode size
nfsd4: remove redundant check from nfsd4_check_resp_size
nfsd4: use more generous NFS4_ACL_MAX
nfsd4: minor nfsd4_replay_cache_entry cleanup
nfsd4: nfsd4_replay_cache_entry should be static
nfsd4: update comments with obsolete function name
rpc: Allow xdr_buf_subsegment to operate in-place
NFSD: Using free_conn free connection
SUNRPC: fix memory leak of peer addresses in XPRT
...
Highlights include:
- Stable fix for a use after free issue in the NFSv4.1 open code
- Fix the SUNRPC bi-directional RPC code to account for TCP segmentation
- Optimise usage of readdirplus when confronted with 'ls -l' situations
- Soft mount bugfixes
- NFS over RDMA bugfixes
- NFSv4 close locking fixes
- Various NFSv4.x client state management optimisations
- Rename/unlink code cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=weNx
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.15-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
- Stable fix for a use after free issue in the NFSv4.1 open code
- Fix the SUNRPC bi-directional RPC code to account for TCP segmentation
- Optimise usage of readdirplus when confronted with 'ls -l' situations
- Soft mount bugfixes
- NFS over RDMA bugfixes
- NFSv4 close locking fixes
- Various NFSv4.x client state management optimisations
- Rename/unlink code cleanups"
* tag 'nfs-for-3.15-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (28 commits)
nfs: pass string length to pr_notice message about readdir loops
NFSv4: Fix a use-after-free problem in open()
SUNRPC: rpc_restart_call/rpc_restart_call_prepare should clear task->tk_status
SUNRPC: Don't let rpc_delay() clobber non-timeout errors
SUNRPC: Ensure call_connect_status() deals correctly with SOFTCONN tasks
SUNRPC: Ensure call_status() deals correctly with SOFTCONN tasks
NFSv4: Ensure we respect soft mount timeouts during trunking discovery
NFSv4: Schedule recovery if nfs40_walk_client_list() is interrupted
NFS: advertise only supported callback netids
SUNRPC: remove KERN_INFO from dprintk() call sites
SUNRPC: Fix large reads on NFS/RDMA
NFS: Clean up: revert increase in READDIR RPC buffer max size
SUNRPC: Ensure that call_bind times out correctly
SUNRPC: Ensure that call_connect times out correctly
nfs: emit a fsnotify_nameremove call in sillyrename codepath
nfs: remove synchronous rename code
nfs: convert nfs_rename to use async_rename infrastructure
nfs: make nfs_async_rename non-static
nfs: abstract out code needed to complete a sillyrename
NFSv4: Clear the open state flags if the new stateid does not match
...
There could be a case, when NFSd file system is mounted in network, different
to socket's one, like below:
"ip netns exec" creates new network and mount namespace, which duplicates NFSd
mount point, created in init_net context. And thus NFS server stop in nested
network context leads to RPCBIND client destruction in init_net.
Then, on NFSd start in nested network context, rpc.nfsd process creates socket
in nested net and passes it into "write_ports", which leads to RPCBIND sockets
creation in init_net context because of the same reason (NFSd monut point was
created in init_net context). An attempt to register passed socket in nested
net leads to panic, because no RPCBIND client present in nexted network
namespace.
This patch add check that passed socket's net matches NFSd superblock's one.
And returns -EINVAL error to user psace otherwise.
v2: Put socket on exit.
Reported-by: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Don't move the assign of args->bc_xprt->xpt_bc_xprt out of xs_setup_bc_tcp,
because rpc_ping (which is in rpc_create) will using it.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Besides checking rpc_xprt out of xs_setup_bc_tcp,
increase it's reference (it's important).
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Backchannel xprt isn't freed right now.
Free it in bc_destroy, and put the reference of THIS_MODULE.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Allow
xdr_buf_subsegment(&buf, &buf, base, len)
to modify an xdr_buf in-place.
Also, none of the callers need the iov_base of head or tail to be zeroed
out.
Also add documentation.
(As it turns out, I'm not really using this new guarantee, but it seems
a simple way to make this function a bit more robust.)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Creating xprt failed after xs_format_peer_addresses,
sunrpc must free those memory of peer addresses in xprt.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The xdr_off value in dma_map_xdr gets passed to ib_dma_map_page as the
offset into the page to be mapped. This calculation does not correctly
take into account the case where the data starts at some offset into
the page. Increment the xdr_off by the page_base to ensure that it is
respected.
Cc: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There are two entirely separate modules under xprtrdma/ and there's no
reason that enabling one should automatically enable the other. Add
config options for each one so they can be enabled/disabled separately.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The server regression was caused by the addition of rq_next_page
(afc59400d6). There were a few places that
were missed with the update of the rq_respages array.
Signed-off-by: Tom Tucker <tom@ogc.us>
Tested-by: Steve Wise <swise@ogc.us>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Mark functions as static in net/sunrpc/svc_xprt.c because they are not
used outside this file.
This eliminates the following warning in net/sunrpc/svc_xprt.c:
net/sunrpc/svc_xprt.c:574:5: warning: no previous prototype for ‘svc_alloc_arg’ [-Wmissing-prototypes]
net/sunrpc/svc_xprt.c:615:18: warning: no previous prototype for ‘svc_get_next_xprt’ [-Wmissing-prototypes]
net/sunrpc/svc_xprt.c:694:6: warning: no previous prototype for ‘svc_add_new_temp_xprt’ [-Wmissing-prototypes]
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When restarting an rpc call, we should not be carrying over data from the
previous call.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Don't schedule an rpc_delay before checking to see if the task
is a SOFTCONN because the tk_callback from the delay (__rpc_atrun)
clears the task status before the rpc_exit_task can be run.
Signed-off-by: Steve Dickson <steved@redhat.com>
Fixes: 561ec16031 (SUNRPC: call_connect_status should recheck...)
Link: http://lkml.kernel.org/r/5329CF7C.7090308@RedHat.com
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The use of KERN_INFO causes garbage characters to appear when
debugging is enabled.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
After commit a11a2bf4, "SUNRPC: Optimise away unnecessary data moves
in xdr_align_pages", Thu Aug 2 13:21:43 2012, READs larger than a
few hundred bytes via NFS/RDMA no longer work. This commit exposed
a long-standing bug in rpcrdma_inline_fixup().
I reproduce this with an rsize=4096 mount using the cthon04 basic
tests. Test 5 fails with an EIO error.
For my reproducer, kernel log shows:
NFS: server cheating in read reply: count 4096 > recvd 0
rpcrdma_inline_fixup() is zeroing the xdr_stream::page_len field,
and xdr_align_pages() is now returning that value to the READ XDR
decoder function.
That field is set up by xdr_inline_pages() by the READ XDR encoder
function. As far as I can tell, it is supposed to be left alone
after that, as it describes the dimensions of the reply xdr_stream,
not the contents of that stream.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=68391
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the rpcbind server is unavailable, we still want the RPC client
to respect the timeout.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When the server is unavailable due to a networking error, etc, we want
the RPC client to respect the timeout delays when attempting to reconnect.
Reported-by: Neil Brown <neilb@suse.de>
Fixes: 561ec16031 (SUNRPC: call_connect_status should recheck bind..)
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Highlights include stable fixes for the following bugs:
- General performance regression due to NFS_INO_INVALID_LABEL being set
when the server doesn't support labeled NFS
- Hang in the RPC code due to a socket out-of-buffer race
- Infinite loop when trying to establish the NFSv4 lease
- Use-after-free bug in the RPCSEC gss code.
- nfs4_select_rw_stateid is returning with a non-zero error value on success
Other bug fixes:
- Potential memory scribble in the RPC bi-directional RPC code
- Pipe version reference leak
- Use the correct net namespace in the new NFSv4 migration code
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tll2
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.14-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include stable fixes for the following bugs:
- General performance regression due to NFS_INO_INVALID_LABEL being
set when the server doesn't support labeled NFS
- Hang in the RPC code due to a socket out-of-buffer race
- Infinite loop when trying to establish the NFSv4 lease
- Use-after-free bug in the RPCSEC gss code.
- nfs4_select_rw_stateid is returning with a non-zero error value on
success
Other bug fixes:
- Potential memory scribble in the RPC bi-directional RPC code
- Pipe version reference leak
- Use the correct net namespace in the new NFSv4 migration code"
* tag 'nfs-for-3.14-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS fix error return in nfs4_select_rw_stateid
NFSv4: Use the correct net namespace in nfs4_update_server
SUNRPC: Fix a pipe_version reference leak
SUNRPC: Ensure that gss_auth isn't freed before its upcall messages
SUNRPC: Fix potential memory scribble in xprt_free_bc_request()
SUNRPC: Fix races in xs_nospace()
SUNRPC: Don't create a gss auth cache unless rpc.gssd is running
NFS: Do not set NFS_INO_INVALID_LABEL unless server supports labeled NFS
In gss_alloc_msg(), if the call to gss_encode_v1_msg() fails, we
want to release the reference to the pipe_version that was obtained
earlier in the function.
Fixes: 9d3a2260f0 (SUNRPC: Fix buffer overflow checking in...)
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Fix a race in which the RPC client is shutting down while the
gss daemon is processing a downcall. If the RPC client manages to
shut down before the gss daemon is done, then the struct gss_auth
used in gss_release_msg() may have already been freed.
Link: http://lkml.kernel.org/r/1392494917.71728.YahooMailNeo@web140002.mail.bf1.yahoo.com
Reported-by: John <da_audiophile@yahoo.com>
Reported-by: Borislav Petkov <bp@alien8.de>
Cc: stable@vger.kernel.org # 3.12+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Pull networking updates from David Miller:
1) Fix flexcan build on big endian, from Arnd Bergmann
2) Correctly attach cpsw to GPIO bitbang MDIO drive, from Stefan Roese
3) udp_add_offload has to use GFP_ATOMIC since it can be invoked from
non-sleepable contexts. From Or Gerlitz
4) vxlan_gro_receive() does not iterate over all possible flows
properly, fix also from Or Gerlitz
5) CAN core doesn't use a proper SKB destructor when it hooks up
sockets to SKBs. Fix from Oliver Hartkopp
6) ip_tunnel_xmit() can use an uninitialized route pointer, fix from
Eric Dumazet
7) Fix address family assignment in IPVS, from Michal Kubecek
8) Fix ath9k build on ARM, from Sujith Manoharan
9) Make sure fail_over_mac only applies for the correct bonding modes,
from Ding Tianhong
10) The udp offload code doesn't use RCU correctly, from Shlomo Pongratz
11) Handle gigabit features properly in generic PHY code, from Florian
Fainelli
12) Don't blindly invoke link operations in
rtnl_link_get_slave_info_data_size, they are optional. Fix from
Fernando Luis Vazquez Cao
13) Add USB IDs for Netgear Aircard 340U, from Bjørn Mork
14) Handle netlink packet padding properly in openvswitch, from Thomas
Graf
15) Fix oops when deleting chains in nf_tables, from Patrick McHardy
16) Fix RX stalls in xen-netback driver, from Zoltan Kiss
17) Fix deadlock in mac80211 stack, from Emmanuel Grumbach
18) inet_nlmsg_size() forgets to consider ifa_cacheinfo, fix from Geert
Uytterhoeven
19) tg3_change_mtu() can deadlock, fix from Nithin Sujir
20) Fix regression in setting SCTP local source addresses on accepted
sockets, caused by some generic ipv6 socket changes. Fix from
Matija Glavinic Pecotic
21) IPPROTO_* must be pure defines, otherwise module aliases don't get
constructed properly. Fix from Jan Moskyto
22) IPV6 netconsole setup doesn't work properly unless an explicit
source address is specified, fix from Sabrina Dubroca
23) Use __GFP_NORETRY for high order skb page allocations in
sock_alloc_send_pskb and skb_page_frag_refill. From Eric Dumazet
24) Fix a regression added in netconsole over bridging, from Cong Wang
25) TCP uses an artificial offset of 1ms for SRTT, but this doesn't jive
well with TCP pacing which needs the SRTT to be accurate. Fix from
Eric Dumazet
26) Several cases of missing header file includes from Rashika Kheria
27) Add ZTE MF667 device ID to qmi_wwan driver, from Raymond Wanyoike
28) TCP Small Queues doesn't handle nonagle properly in some corner
cases, fix from Eric Dumazet
29) Remove extraneous read_unlock in bond_enslave, whoops. From Ding
Tianhong
30) Fix 9p trans_virtio handling of vmalloc buffers, from Richard Yao
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (136 commits)
6lowpan: fix lockdep splats
alx: add missing stats_lock spinlock init
9p/trans_virtio.c: Fix broken zero-copy on vmalloc() buffers
bonding: remove unwanted bond lock for enslave processing
USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support
tcp: tsq: fix nonagle handling
bridge: Prevent possible race condition in br_fdb_change_mac_address
bridge: Properly check if local fdb entry can be deleted when deleting vlan
bridge: Properly check if local fdb entry can be deleted in br_fdb_delete_by_port
bridge: Properly check if local fdb entry can be deleted in br_fdb_change_mac_address
bridge: Fix the way to check if a local fdb entry can be deleted
bridge: Change local fdb entries whenever mac address of bridge device changes
bridge: Fix the way to find old local fdb entries in br_fdb_change_mac_address
bridge: Fix the way to insert new local fdb entries in br_fdb_changeaddr
bridge: Fix the way to find old local fdb entries in br_fdb_changeaddr
tcp: correct code comment stating 3 min timeout for FIN_WAIT2, we only do 1 min
net: vxge: Remove unused device pointer
net: qmi_wwan: add ZTE MF667
3c59x: Remove unused pointer in vortex_eisa_cleanup()
net: fix 'ip rule' iif/oif device rename
...
Since TCP is a stream protocol, our callback read code needs to take into
account the fact that RPC callbacks are not always confined to a single
TCP segment.
This patch adds support for multiple TCP segments by ensuring that we
only remove the rpc_rqst structure from the 'free backchannel requests'
list once the data has been completely received. We rely on the fact
that TCP data is ordered for the duration of the connection.
Reported-by: shaobingqing <shaobingqing@bwstor.com.cn>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The call to xprt_free_allocation() will call list_del() on
req->rq_bc_pa_list, which is not attached to a list.
This patch moves the list_del() out of xprt_free_allocation()
and into those callers that need it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When a send failure occurs due to the socket being out of buffer space,
we call xs_nospace() in order to have the RPC task wait until the
socket has drained enough to make it worth while trying again.
The current patch fixes a race in which the socket is drained before
we get round to setting up the machinery in xs_nospace(), and which
is reported to cause hangs.
Link: http://lkml.kernel.org/r/20140210170315.33dfc621@notabene.brown
Fixes: a9a6b52ee1 (SUNRPC: Don't start the retransmission timer...)
Reported-by: Neil Brown <neilb@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
An infinite loop is caused when nfs4_establish_lease() fails
with -EACCES. This causes nfs4_handle_reclaim_lease_error()
to sleep a bit and resets the NFS4CLNT_LEASE_EXPIRED bit.
This in turn causes nfs4_state_manager() to try and
reestablished the lease, again, again, again...
The problem is a valid RPCSEC_GSS client is being created when
rpc.gssd is not running.
Link: http://lkml.kernel.org/r/1392066375-16502-1-git-send-email-steved@redhat.com
Fixes: 0ea9de0ea6 (sunrpc: turn warn_gssd() log message into a dprintk())
Reported-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Mark functions as static in net/sunrpc/svc_xprt.c because they are not
used outside this file.
This eliminates the following warning in net/sunrpc/svc_xprt.c:
net/sunrpc/svc_xprt.c:574:5: warning: no previous prototype for ‘svc_alloc_arg’ [-Wmissing-prototypes]
net/sunrpc/svc_xprt.c:615:18: warning: no previous prototype for ‘svc_get_next_xprt’ [-Wmissing-prototypes]
net/sunrpc/svc_xprt.c:694:6: warning: no previous prototype for ‘svc_add_new_temp_xprt’ [-Wmissing-prototypes]
Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Highlights:
- Fix several races in nfs_revalidate_mapping
- NFSv4.1 slot leakage in the pNFS files driver
- Stable fix for a slot leak in nfs40_sequence_done
- Don't reject NFSv4 servers that support ACLs with only ALLOW aces
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=B7f0
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.14-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights:
- Fix several races in nfs_revalidate_mapping
- NFSv4.1 slot leakage in the pNFS files driver
- Stable fix for a slot leak in nfs40_sequence_done
- Don't reject NFSv4 servers that support ACLs with only ALLOW aces"
* tag 'nfs-for-3.14-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
nfs: initialize the ACL support bits to zero.
NFSv4.1: Cleanup
NFSv4.1: Clean up nfs41_sequence_done
NFSv4: Fix a slot leak in nfs40_sequence_done
NFSv4.1 free slot before resending I/O to MDS
nfs: add memory barriers around NFS_INO_INVALID_DATA and NFS_INO_INVALIDATING
NFS: Fix races in nfs_revalidate_mapping
sunrpc: turn warn_gssd() log message into a dprintk()
NFS: fix the handling of NFS_INO_INVALID_DATA flag in nfs_revalidate_mapping
nfs: handle servers that support only ALLOW ACE type.
Pull nfsd updates from Bruce Fields:
- Handle some loose ends from the vfs read delegation support.
(For example nfsd can stop breaking leases on its own in a
fewer places where it can now depend on the vfs to.)
- Make life a little easier for NFSv4-only configurations
(thanks to Kinglong Mee).
- Fix some gss-proxy problems (thanks Jeff Layton).
- miscellaneous bug fixes and cleanup
* 'for-3.14' of git://linux-nfs.org/~bfields/linux: (38 commits)
nfsd: consider CLAIM_FH when handing out delegation
nfsd4: fix delegation-unlink/rename race
nfsd4: delay setting current_fh in open
nfsd4: minor nfs4_setlease cleanup
gss_krb5: use lcm from kernel lib
nfsd4: decrease nfsd4_encode_fattr stack usage
nfsd: fix encode_entryplus_baggage stack usage
nfsd4: simplify xdr encoding of nfsv4 names
nfsd4: encode_rdattr_error cleanup
nfsd4: nfsd4_encode_fattr cleanup
minor svcauth_gss.c cleanup
nfsd4: better VERIFY comment
nfsd4: break only delegations when appropriate
NFSD: Fix a memory leak in nfsd4_create_session
sunrpc: get rid of use_gssp_lock
sunrpc: fix potential race between setting use_gss_proxy and the upcall rpc_clnt
sunrpc: don't wait for write before allowing reads from use-gss-proxy file
nfsd: get rid of unused function definition
Define op_iattr for nfsd4_open instead using macro
NFSD: fix compile warning without CONFIG_NFSD_V3
...
Highlights include:
- Stable fix for an infinite loop in RPC state machine
- Stable fix for a use after free situation in the NFSv4 trunking discovery
- Stable fix for error handling in the NFSv4 trunking discovery
- Stable fix for the page write update code
- Stable fix for the NFSv4.1 mount time security negotiation
- Stable fix for the NFSv4 open code.
- O_DIRECT locking fixes
- fix an Oops in the pnfs file commit code
- RPC layer needs finer grained handling of connection errors
- More RPC GSS upcall fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=abfY
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.14-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
- stable fix for an infinite loop in RPC state machine
- stable fix for a use after free situation in the NFSv4 trunking discovery
- stable fix for error handling in the NFSv4 trunking discovery
- stable fix for the page write update code
- stable fix for the NFSv4.1 mount time security negotiation
- stable fix for the NFSv4 open code.
- O_DIRECT locking fixes
- fix an Oops in the pnfs file commit code
- RPC layer needs finer grained handling of connection errors
- more RPC GSS upcall fixes"
* tag 'nfs-for-3.14-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (30 commits)
pnfs: Proper delay for NFS4ERR_RECALLCONFLICT in layout_get_done
pnfs: fix BUG in filelayout_recover_commit_reqs
nfs4: fix discover_server_trunking use after free
NFSv4.1: Handle errors correctly in nfs41_walk_client_list
nfs: always make sure page is up-to-date before extending a write to cover the entire page
nfs: page cache invalidation for dio
nfs: take i_mutex during direct I/O reads
nfs: merge nfs_direct_write into nfs_file_direct_write
nfs: merge nfs_direct_read into nfs_file_direct_read
nfs: increment i_dio_count for reads, too
nfs: defer inode_dio_done call until size update is done
nfs: fix size updates for aio writes
nfs4.1: properly handle ENOTSUP in SECINFO_NO_NAME
NFSv4.1: Fix a race in nfs4_write_inode
NFSv4.1: Don't trust attributes if a pNFS LAYOUTCOMMIT is outstanding
point to the right include file in a comment (left over from a9004abc3)
NFS: dprintk() should not print negative fileids and inode numbers
nfs: fix dead code of ipv6_addr_scope
sunrpc: Fix infinite loop in RPC state machine
SUNRPC: Add tracepoint for socket errors
...
The original printk() made sense when the GSSAPI codepaths were called
only when sec=krb5* was explicitly requested. Now however, in many cases
the nfs client will try to acquire GSSAPI credentials by default, even
when it's not requested.
Since we don't have a great mechanism to distinguish between the two
cases, just turn the pr_warn into a dprintk instead. With this change we
can also get rid of the ratelimiting.
We do need to keep the EXPORT_SYMBOL(gssd_running) in place since
auth_gss.ko needs it and sunrpc.ko provides it. We can however,
eliminate the gssd_running call in the nfs code since that's a bit of a
layering violation.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Replace hardcoded lowest common multiple algorithm by the lcm()
function in kernel lib.
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch removes the net_random and net_srandom macros and replaces
them with direct calls to the prandom ones. As new commits only seem to
use prandom_u32 there is no use to keep them around.
This change makes it easier to grep for users of prandom_u32.
Signed-off-by: Aruna-Hewapathirane <aruna.hewapathirane@gmail.com>
Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can achieve the same result with a cmpxchg(). This also fixes a
potential race in use_gss_proxy(). The value of sn->use_gss_proxy could
go from -1 to 1 just after we check it in use_gss_proxy() but before we
acquire the spinlock. The procfile write would end up returning success
but the value would flip to 0 soon afterward. With this method we not
only avoid locking but the first "setter" always wins.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
An nfsd thread can call use_gss_proxy and find it set to '1' but find
gssp_clnt still NULL, so that when it attempts the upcall the result
will be an unnecessary -EIO.
So, ensure that gssp_clnt is created first, and set the use_gss_proxy
variable only if that succeeds.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Chuck Lever