When decompressing into memory, the output buffer length is set to some
arbitrarily high value (0x7fffffff) to indicate the output is, virtually,
unlimited in size.
The problem with this is that some platforms have their physical memory at
high physical addresses (0x80000000 or more), and that the output buffer
address and its "unlimited" length cannot be added without overflowing.
An example of this can be found in inflate_fast():
/* next_out is the output buffer address */
out = strm->next_out - OFF;
/* avail_out is the output buffer size. end will overflow if the output
* address is >= 0x80000104 */
end = out + (strm->avail_out - 257);
This has huge consequences on the performance of kernel decompression,
since the following exit condition of inflate_fast() will be always true:
} while (in < last && out < end);
Indeed, "end" has overflowed and is now always lower than "out". As a
result, inflate_fast() will return after processing one single byte of
input data, and will thus need to be called an unreasonably high number of
times. This probably went unnoticed because kernel decompression is fast
enough even with this issue.
Nonetheless, adjusting the output buffer length in such a way that the
above pointer arithmetic never overflows results in a kernel decompression
that is about 3 times faster on affected machines.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: Jon Medhurst <tixy@linaro.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The documentation mentions a "name" parameter, which does not exist. This
commit removes such mention from the function documentation.
Signed-off-by: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's clearer to have patterns marked as directories.
Change the directory patterns without terminating slashes.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add ownership to maintainers file for the mach-bcm related files,
including drivers that are used for the SoCs defined in mach-bcm.
Signed-off-by: Christian Daudt <csd@broadcom.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit c50cd35788 ("net: gre: move GSO functions to gre_offload")
renamed and separated the file into multiple files. Update the
patterns.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Dmitry Kozlov <xeb@mail.ru>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit a0e631235a ("usb: phy: move all PHY drivers to
drivers/usb/phy/") deleted the files, remove the file pattern.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit f3bc64d6d1 ("USB: EHCI: DT support for generic bus glue")
removed the ehci-vt8500.c file, update the file pattern to include
ehci-platform.c.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 6659a20a76 ("ARC: MAINTAINERS update for ARC") typoed the file
pattern. Fix it.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 786baecfe7 ("[media] dvb-usb: move it to
drivers/media/usb/dvb-usb") moved the files, update the pattern.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 09ec1d7ea6 ("ARM: S3C24XX: Remove plat-s3c24xx directory in
arch/arm/") moved the files, remove the pattern.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit a7ed099ffc ("ARM: spear: move all files to mach-spear") moved
all the files into a single directory, delete the now unnecessary
duplicate sections and update the pattern.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 85fd6d63bf ("ARM: S3C2410: move mach-s3c2410/* into
mach-s3c24xx/") moved the files, update the patterns.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 498153995b ("ARM: OMAP2+: powerdomain/PRM: move the low-level
powerdomain") renamed the files, update the patterns.
Identical to a patch earlier sent by Cesar Eduardo Barros.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Cesar Eduardo Barros <cesarb@cesarb.eti.br>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 4bd5259e53 ("ARM: OMAP2/3: clockdomain/PRM/CM: move the
low-level clockdomain functions into PRM/CM") deleted the files, update
the pattern.
Identical to a patch earlier sent by Cesar Eduardo Barros.
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Cesar Eduardo Barros <cesarb@cesarb.eti.br>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As in commit f21afc25f9 ("smp.h: Use local_irq_{save,restore}() in
!SMP version of on_each_cpu()"), we don't want to enable irqs if they
are not already enabled.
I don't know of any bugs currently caused by this unconditional
local_irq_enable(), but I want to use this function in MIPS/OCTEON early
boot (when we have early_boot_irqs_disabled). This also makes this
function have similar semantics to on_each_cpu() which is good in
itself.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Unclutter -Wmissing-prototypes warning types (enabled at make W=1)
linux/include/linux/syscalls.h:190:18: warning: no previous prototype for 'SyS_semctl' [-Wmissing-prototypes]
asmlinkage long SyS##name(__MAP(x,__SC_LONG,__VA_ARGS__)) \
^
linux/include/linux/syscalls.h:183:2: note: in expansion of macro '__SYSCALL_DEFINEx'
__SYSCALL_DEFINEx(x, sname, __VA_ARGS__)
^
by adding forward declarations right before definitions.
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
At least on ARM no-MMU the extable is empty and so there is nothing to
sort. So add a check for the table to be empty which effectively only
changes that the misleading pr_notice is suppressed.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: David Daney <david.daney@cavium.com>
Cc: "H. Peter Anvin" <hpa@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All of the other non-trivial !SMP versions of functions in smp.h are
out-of-line in up.c. Move on_each_cpu() there as well.
This allows us to get rid of the #include <linux/irqflags.h>. The
drawback is that this makes both the x86_64 and i386 defconfig !SMP
kernels about 200 bytes larger each.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The SMP version of this function doesn't unconditionally enable irqs, so
neither should this !SMP version. There are no know problems caused by
this, but we make the change for consistency's sake.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As in commit f21afc25f9 ("smp.h: Use local_irq_{save,restore}() in
!SMP version of on_each_cpu()"), we don't want to enable irqs if they
are not already enabled. There are currently no known problematical
callers of these functions, but since it is a known failure pattern, we
preemptively fix them.
Since they are not trivial functions, make them non-inline by moving
them to up.c. This also makes it so we don't have to fix #include
dependancies for preempt_{disable,enable}.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When running with GENERIC_LOCKBREAK=y, the locking implementations emit
calls to arch_{read,write,spin}_relax when spinning on a contended lock
in order to allow architectures to favour the CPU owning the lock if
possible.
In reality, everybody apart from PowerPC and S390 just does cpu_relax()
here, so make that the default behaviour and allow it to be overridden
if required.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When failure occurs in hotplug_cfd(), need release related resources, or
will cause memory leak.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Acked-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Free the bio_integrity_pool in the fail path of biovec_create_pool in
function bioset_integrity_create().
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We cannot assume that the inline assembler code always ends up in the same
file as the original C file. So make any assembler labels that are called
with "extern" by C global
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
const has to use __initconst, not __initdata
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I found the following pattern that leads in to interesting findings:
grep -r "ret.*|=.*__put_user" *
grep -r "ret.*|=.*__get_user" *
grep -r "ret.*|=.*__copy" *
The __put_user() calls in compat_ioctl.c, ptrace compat, signal compat,
since those appear in compat code, we could probably expect the kernel
addresses not to be reachable in the lower 32-bit range, so I think they
might not be exploitable.
For the "__get_user" cases, I don't think those are exploitable: the worse
that can happen is that the kernel will copy kernel memory into in-kernel
buffers, and will fail immediately afterward.
The alpha csum_partial_copy_from_user() seems to be missing the
access_ok() check entirely. The fix is inspired from x86. This could
lead to information leak on alpha. I also noticed that many architectures
map csum_partial_copy_from_user() to csum_partial_copy_generic(), but I
wonder if the latter is performing the access checks on every
architectures.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The use of strict_strtoul() is not preferred, because strict_strtoul() is
obsolete. Thus, kstrtoul() should be used.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Cc: Tom Gundersen <teg@jklm.no>
Cc: Mike Waychison <mikew@google.com>
Acked-by: Mike Waychison <mikew@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pnp_bus_suspend() and pnp_bus_resume() invoke legacy pm_ops from
pnp_driver. Changed pnp_bus_suspend() and pnp_bus_resume() to check if
pnp driver has dev_pm_ops and call. If dev_pm_ops don't exist, then call
use legacy pm_ops. Without this change, pnp_driver dev_pm_ops will not
get called.
In addition to the pnp driver bus pm_ops change to invoke driver
dev_pm_ops, this patch set contains changes to rtc-cmos, tpm_tis, and
apple-gmux pnp drivers to convert from legacy pm_ops to dev_pm_ops.
This patch (of 4):
pnp_bus_suspend() and pnp_bus_resume() invoke legacy pm_ops from
pnp_driver. Changed pnp_bus_suspend() and pnp_bus_resume() to check if
pnp driver has dev_pm_ops and call. If dev_pm_ops don't exist, then call
use legacy pm_ops. Without this change, pnp_driver dev_pm_ops will not
get called.
Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Cc: Leonidas Da Silva Barbosa <leosilva@linux.vnet.ibm.com>
Cc: Ashley Lai <ashley@ashleylai.com>
Cc: Rajiv Andrade <mail@srajiv.net>
Cc: Marcel Selhorst <tpmdd@selhorst.net>
Cc: Sirrix AG <tpmdd@sirrix.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Peter Hüwe <PeterHuewe@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A memory cgroup with (1) multiple threshold notifications and (2) at least
one threshold >=2G was not reliable. Specifically the notifications would
either not fire or would not fire in the proper order.
The __mem_cgroup_threshold() signaling logic depends on keeping 64 bit
thresholds in sorted order. mem_cgroup_usage_register_event() sorts them
with compare_thresholds(), which returns the difference of two 64 bit
thresholds as an int. If the difference is positive but has bit[31] set,
then sort() treats the difference as negative and breaks sort order.
This fix compares the two arbitrary 64 bit thresholds returning the
classic -1, 0, 1 result.
The test below sets two notifications (at 0x1000 and 0x81001000):
cd /sys/fs/cgroup/memory
mkdir x
for x in 4096 2164264960; do
cgroup_event_listener x/memory.usage_in_bytes $x | sed "s/^/$x listener:/" &
done
echo $$ > x/cgroup.procs
anon_leaker 500M
v3.11-rc7 fails to signal the 4096 event listener:
Leaking...
Done leaking pages.
Patched v3.11-rc7 properly notifies:
Leaking...
4096 listener:2013:8:31:14:13:36
Done leaking pages.
The fixed bug is old. It appears to date back to the introduction of
memcg threshold notifications in v2.6.34-rc1-116-g2e72b6347c94 "memcg:
implement memory thresholds"
Signed-off-by: Greg Thelen <gthelen@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the helper function instead of __GFP_ZERO.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the helper function instead of __GFP_ZERO.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pgoff is not used after the statement "pgoff = vma->vm_pgoff;", so the
assignment is redundant.
Signed-off-by: Yanchuan Nian <ycnian@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is a race between mark inode dirty and writeback thread, see the
following scenario. In this case, writeback thread will not run though
there is dirty_io.
__mark_inode_dirty() bdi_writeback_workfn()
... ...
spin_lock(&inode->i_lock);
...
if (bdi_cap_writeback_dirty(bdi)) {
<<< assume wb has dirty_io, so wakeup_bdi is false.
<<< the following inode_dirty also have wakeup_bdi false.
if (!wb_has_dirty_io(&bdi->wb))
wakeup_bdi = true;
}
spin_unlock(&inode->i_lock);
<<< assume last dirty_io is removed here.
pages_written = wb_do_writeback(wb);
...
<<< work_list empty and wb has no dirty_io,
<<< delayed_work will not be queued.
if (!list_empty(&bdi->work_list) ||
(wb_has_dirty_io(wb) && dirty_writeback_interval))
queue_delayed_work(bdi_wq, &wb->dwork,
msecs_to_jiffies(dirty_writeback_interval * 10));
spin_lock(&bdi->wb.list_lock);
inode->dirtied_when = jiffies;
<<< new dirty_io is added.
list_move(&inode->i_wb_list, &bdi->wb.b_dirty);
spin_unlock(&bdi->wb.list_lock);
<<< though there is dirty_io, but wakeup_bdi is false,
<<< so writeback thread will not be waked up and
<<< the new dirty_io will not be flushed.
if (wakeup_bdi)
bdi_wakeup_thread_delayed(bdi);
Writeback will run until there is a new flush work queued. This may cause
a lot of dirty pages stay in memory for a long time.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
madvise_hwpoison() has two locals called "ret". Fix it all up.
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The return value outside for loop is always zero which means
madvise_hwpoison return success, however, this is not truth for
soft_offline_page w/ failure return value.
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
madvise hwpoison inject will poison the read-only empty zero page if there
is no write access before poison. Empty zero page reference count will be
increased for hwpoison, subsequent poison zero page will return directly
since page has already been set PG_hwpoison, however, page reference count
is still increased by get_user_pages_fast. The unpoison process will
unpoison the empty zero page and decrease the reference count successfully
for the fist time, however, subsequent unpoison empty zero page will
return directly since page has already been unpoisoned and without
decrease the page reference count of empty zero page.
This patch fixes it by make madvise_hwpoison() put a page and return
immediately (without calling memory_failure() or soft_offline_page()) when
the page is already hwpoisoned.
Testcase:
#define _GNU_SOURCE
#include <stdlib.h>
#include <stdio.h>
#include <sys/mman.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/types.h>
#include <errno.h>
#define PAGES_TO_TEST 3
#define PAGE_SIZE 4096
int main(void)
{
char *mem;
int i;
mem = mmap(NULL, PAGES_TO_TEST * PAGE_SIZE,
PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0);
if (madvise(mem, PAGES_TO_TEST * PAGE_SIZE, MADV_HWPOISON) == -1)
return -1;
munmap(mem, PAGES_TO_TEST * PAGE_SIZE);
return 0;
}
Add printk to dump page reference count:
[ 93.075959] Injecting memory failure for page 0x19d0 at 0xb77d8000
[ 93.076207] MCE 0x19d0: non LRU page recovery: Ignored
[ 93.076209] pfn 0x19d0, page count = 1 after memory failure
[ 93.076220] Injecting memory failure for page 0x19d0 at 0xb77d9000
[ 93.076221] MCE 0x19d0: already hardware poisoned
[ 93.076222] pfn 0x19d0, page count = 2 after memory failure
[ 93.076224] Injecting memory failure for page 0x19d0 at 0xb77da000
[ 93.076224] MCE 0x19d0: already hardware poisoned
[ 93.076225] pfn 0x19d0, page count = 3 after memory failure
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Suggested-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexandre Courbot