Commit Graph

28 Commits

Author SHA1 Message Date
Arnd Bergmann 4de833c337 drm/radeon: replace udelay with mdelay for long timeouts
Some architectures require that delays longer than a few
miliseconds are called through mdelay. This was triggered
on ARM randconfig builds.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-04-10 10:21:00 +01:00
Christian König 15d3332f31 drm/radeon/kms: add support for semaphores v3
They are used to sync between rings, while fences
sync between a ring and the cpu.

v2 Fix radeon_semaphore_driver_fini when no semaphore were
allocated.

v3 Initialize list early on to avoid issue in case or early
error

Signed-off-by: Christian König <deathsimple@vodafone.de>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-12-20 19:49:36 +00:00
Paul Gortmaker e0cd360813 gpu: add module.h to drivers/gpu files as required.
So that we don't get build failures once the implicit module.h
presence is removed.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:32:03 -04:00
Benjamin Herrenschmidt df07d6999e drm/radeon: Writeback endian fixes
The writeback ring pointer and IH ring pointer are read using le32_to_cpu
so we do not want the chip to byteswap them on big-endian.

We still want to byteswap the ring itself and the IBs, so we don't touch
that but we remove setting of the byteswap bits in CP_RB_RPTR_ADDR and
IH_CNTL.

In general, for things like that where we control all the accessors easily,
we are better off doing the swap in SW rather than HW. Paradoxally, it does
keep the code closer to x86 and avoid using poorly tested HW features.

I also changed the use of RADEON_ to R600_ in a couple of cases to be more
consistent with the surrounding code.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-25 12:14:56 +01:00
Cédric Cano dee54c40a1 drm/radeon: 6xx/7xx non-kms endian fixes
agd5f: minor cleanups

Signed-off-by: Cédric Cano <ccano@interfaceconcept.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-02-14 09:23:35 +10:00
Benjamin Herrenschmidt a30f6fb7ce drm/radeon: Fix pci_map_page() error checking
0 is a valid DMA address from pci_map_page(), use pci_dma_mapping_error()
instead to check for errors

[airlied: fix warning + two other places with errors.]

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-08-12 09:38:29 +10:00
Alex Deucher f867c60def drm/radeon/kms: gfx init fixes for r6xx/r7xx
This fixes some issues with the last gfx init patch.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-03-31 09:53:53 +10:00
Alex Deucher d03f5d5971 drm/radeon: fixes for r6xx/r7xx gfx init
- updated swizzle modes for backend map setup
- fix programming of a few gfx regs
- properly handle pipe/backend setup on LE cards

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-23 09:46:23 +10:00
Alex Deucher 6271901d82 drm/radeon/rv740: fix backend setup
This patch fixes occlusion queries and rendering errors
on rv740 boards. Hardcoding the backend map is not an optimal
solution, but a better fix is being worked on.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-23 09:46:22 +10:00
Jerome Glisse 961fb597c1 drm/radeon/kms: r600/r700 command stream checker
This patch add cs checker to r600/r700 hw. Command stream checking
will rewrite some of the cs value in order to restrict GPU access
to BO size. This doesn't break old userspace but just enforce safe
value. It should break any things that was using the r600/r700 cs
ioctl to do forbidden things (malicious software), though we are
not aware of such things.

Here is the list of thing we check :
- enforcing resource size
- enforcing color buffer slice tile max, will restrict cb access
- enforcing db buffer slice tile max, will restrict db access

We don't check for shader bigger than the BO in which they are
supposed to be, such use would lead to GPU lockup and is harmless
from security POV, as far as we can tell (note that even checking
for this wouldn't prevent someone to write bogus shader that lead
to lockup).

This patch has received as much testing as humanly possible with
old userspace to check that it didn't break such configuration.
However not all the applications out there were tested, thus it
might broke some odd, rare applications.

[airlied: fix rules for cs checker for parallel builds]

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-11 19:03:45 +10:00
Jerome Glisse 3ce0a23d2d drm/radeon/kms: add r600 KMS support
This adds the r600 KMS + CS support to the Linux kernel.

The r600 TTM support is quite basic and still needs more
work esp around using interrupts, but the polled fencing
should work okay for now.

Also currently TTM is using memcpy to do VRAM moves,
the code is here to use a 3D blit to do this, but
isn't fully debugged yet.

Authors:
Alex Deucher <alexdeucher@gmail.com>
Dave Airlie <airlied@redhat.com>
Jerome Glisse <jglisse@redhat.com>

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-08 11:15:52 +10:00
Ben Hutchings 70967ab9c0 radeon: Use request_firmware()
Loosely based on a patch by
Jaswinder Singh Rajput <jaswinderlinux@gmail.com>.

KMS support by Dave Airlie <airlied@redhat.com>.

For Radeon 100- to 500-series, firmware blobs look like:
    struct {
        __be32 datah;
        __be32 datal;
    } cp_ucode[256];

For Radeon 600-series, there are two separate firmware blobs:
    __be32 me_ucode[PM4_UCODE_SIZE * 3];
    __be32 pfp_ucode[PFP_UCODE_SIZE];

For Radeon 700-series, likewise:
    __be32 me_ucode[R700_PM4_UCODE_SIZE];
    __be32 pfp_ucode[R700_PFP_UCODE_SIZE];

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-31 09:09:30 +10:00
Alex Deucher 6502fbfaf8 drm/radeon: Add support for RS880 chips
These are new AMD IGP chips

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-08-05 12:07:09 +10:00
Alex Deucher 715cbb05c9 drm/radeon: add support for RV790.
This adds the PCI IDs for the rv790 which are equiv to the rv770.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-12 15:56:30 +10:00
Alex Deucher 2a71ebcd85 drm/radeon: add rv740 drm support.
This adds drm support for the RV740 family of chips to the r600 support code.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-12 15:56:28 +10:00
Alex Deucher 029a2edbd3 drm/radeon: load the right microcode on rs780
Copy/paste error.  The RV670 microcode should work ok, so it's
not a show stopper.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-04-03 10:31:23 +10:00
Alex Deucher 41f13fe81d drm/radeon: fix logic in r600_page_table_init() to match ati_gart
This fixes page table init on rs600.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-18 14:18:15 +10:00
Dave Airlie 06f0a488c1 drm/radeon: r600 ptes are 64-bit, cleanup cleanup function.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-13 14:24:21 +10:00
Dave Airlie d02f7fa77d drm/radeon: fix r600 writeback across suspend/resume
This update was done in mainline radeon, but not in the r600.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-13 14:24:20 +10:00
Dave Airlie 6546bf6d6c drm/radeon: fix r600 writeback setup.
This fixes 2 bugs:
1. the AGP calculation wasn't consistent with the PCI(E) calc for the
RPTR_ADDR registers. This consolidates the writes and fixes it up.

2. The scratch address was being incorrectly calculated, this breaks
it out into a lot more linear steps.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-13 14:24:20 +10:00
Hannes Eder 8f497aade8 drm/radeon: NULL noise: drivers/gpu/drm/radeon/radeon_*.c
Fix this sparse warning:
  drivers/gpu/drm/radeon/r600_cp.c:1811:52: warning: Using plain integer as NULL pointer
  drivers/gpu/drm/radeon/radeon_cp.c:1363:52: warning: Using plain integer as NULL pointer
  drivers/gpu/drm/radeon/radeon_state.c:1983:61: warning: Using plain integer as NULL pointer

Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-13 14:24:19 +10:00
Dave Airlie a763d7dc0a drm/radeon: fix r600 pci mapping calls.
This realigns the r600 pci mapping calls with the ati pcigart ones,
fixing the direction and using the correct interface.

Suggested by Jerome Glisse.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-13 14:24:18 +10:00
Alex Deucher 08932156cc drm/radeon: r6xx/r7xx: fix possible oops in r600_page_table_cleanup()
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-13 14:24:17 +10:00
Dave Airlie a7d13ad0e2 drm/r600: fix rptr address along lines of previous fixes to radeon.
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-13 14:24:16 +10:00
Dave Airlie eb1d91954e drm/r600: fixup r600 gart table accessor like ati_pcigart.c
This attempts to fixup the r600 GART accessors so they work on other arches.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-13 14:24:15 +10:00
Alex Deucher c1556f7151 radeon: add support for rs600 GPUs
RS600s are an AMD IGP for Intel CPUs, that look like RS690s from
a lot of perspectives but look like r600s from a memory controller
point of view.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-13 14:24:13 +10:00
Alex Deucher 7659e9804b radeon: fix r600 AGP support
This fixes the ioremap issues with r600 AGP.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-13 14:24:12 +10:00
Alex Deucher c05ce0834a drm/radeon: add initial support for R6xx/R7xx GPUs
This adds support for 2D/Xv acceleration in the X.org 2D driver,
to the drm. It doesn't yet provide any 3D support hooks.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-03-13 14:24:11 +10:00