The last patch forgot to add the driver to the Makefile, so it
would not end up getting built. This resolves that issue.
Cc: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kernel module (device driver) for dt3155 frame grabber
video4linux2 compliant (finally). Works with "xawtv -f".
======================================================
This driver is written (almost) from scratch, using the
allocator developed for dt3155pci see bellow). The driver
uses videobuf-dma-contig interface modified to use the above
mentioned allocator instead of dma_alloc_coheren().
The first thing to do was to design a new allocator based
on allocating a configurable number of 4MB chunks of memory,
that latter are broken into frame buffers of 768x576 bytes
kept in different FIFOs (queues). As far as the driver autoloads
as a kernel module during kernel boot, the allocation of 4MB
chunks succeeds.
The driver keeps three FIFOs: one for 4MB chunks, one for free
buffers (available for allocations) and one for buffers already
allocated. Allocation/deallocation is done automatically though
the video4linux videobuf subsystem (some pointers to functions
are replaced by driver supplied functions).
Sure, there are problems:
1. The device tested to work with "xawtv -f" either via read()
method (DT3155_STREAMING not selected), or via mmap() method
(DT3155_STREAMING is selected) only. This coresponds to either
cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE;
or
cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
but not when
cap->capabilities = V4L2_CAP_VIDEO_CAPTURE |
V4L2_CAP_STREAMING |
V4L2_CAP_READWRITE;
This is because xawtv calls poll() before starting streaming,
but videobuf_poll_stream() automatically starts reading if streaming
is not started.
This selection is made during kernel configuration (for now).
2. Works for CCIR, but should work for RS-170 (not tested)
This is made also during kernel configuration.
3. Could work for multiple dt3155 frame grabbers in a PC,
(private data is allocated during PCI probe() method), but
is not tested due to lack of a second board.
4. Not tested on a BIG ENDIAN architecture.
5. Many others you could find .... :-)
All critics, comments, suggestions are wellcome.
Signed-off-by: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Don't redefine something that we already have in the core
kernel. Also move to use PCI_DEVICE() macros to make things
a bit simpler when changing the define.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's only being used for one vendor id, so move it into
the driver that uses it and delete the file.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This resolves some coding style issues in comedidev.h
And yes, volatile here meant nothing, removing it is ok.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix cxt1e1 build error:
drivers/staging/cxt1e1/linux.c:1195: error: 'struct net_device' has no member named 'priv'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Bob Beers <bob.beers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch cleans up numerous WARNINGS and ERRORS listed by the
checkpatch.pl tool
Signed-off-by: Iain Churcher <iain.linux.coding@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix printk format warning in memrar:
drivers/staging/memrar/memrar_handler.c:393: warning: format '%u' expects type 'unsigned int', but argument 4 has type 'size_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Ossama Othman <ossama.othman@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patches comedi_fops.c to add kernel log level to some printk calls
Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This drivers allows a communication with the Analog Devices ADIS16255
Low Power Gyroscope over SPI.
Signed-off-by: Matthias Brugger <mensch0815@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use the standard config option CONFIG_PM to enable rtl8192e PM
functions. Tested on Samsung N140 and it works fine. Without enabling
the PM functions, the box always fails to resume.
Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Code cleanup, removed empty IN definition used to denote input parameters.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The functions hostap_set_hostapd, hostap_iotctl clashed with functions of the
same name with CONFIG_HOSTAP=y and/or CONFIG_VT6656=y.
Signed-off-by: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The functions hostap_set_hostapd, hostap_iotctl clashed with functions of the
same name with CONFIG_HOSTAP=y and/or CONFIG_VT6655=y.
Signed-off-by: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replaced custom U_ETHER_ADDR_LEN by ETH_ALEN from <linux/if_ether.h>.
Resolved checkpatch findings on the changed lines, mostly indentation.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Code cleanup following other USB drivers:
- Renamed driver struct and callbacks to vt6656_*
- Added __init/__exit like directives
- Resolved checkpatch.pl findings on those lines
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This change adds the Kconfig and Make file for TI's
ST line discipline driver and the BlueZ driver for BT
core of the TI BT/FM/GPS combo chip.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
This is BlueZ driver making use of Shared Transport line
discipline to communicate with the chip.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A TODO file and a ABI to list the things to be done,
and user-space/kernel-space interface for this ldisc.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Texas Instruments BT, FM and GPS combo chips/drivers
make use of a single TTY to communicate with the chip.
This is the common header file for both the ST driver and the
protocol drivers which intend to use ST as their mode of
transport.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Texas Instruments BT, FM and GPS combo chips/drivers
make use of a single TTY to communicate with the chip.
This module constitutes the proprietary power management
protocol from TI for the BT/FM/GPS combo chips
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Kernel Space Init-Manager works along with User-Mode
Init Manager daemon running to maintain the UART state.
Communication between user-space daemon and this module can be
1. Via the pid written onto sysfs entry
2. Via the rfkill subsystem
It also is a platform driver with a relevant platform device
in the board-*.c along with the list of BT/FM/GPS chip enable
gpio configuration
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Texas Instruments BT, FM and GPS combo chips/drivers
make use of a single TTY to communicate with the chip.
This module constitutes the core logic, TTY ldisc driver
and the exported symbols for registering/unregistering of
the protocol drivers such as BT/FM/GPS.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Code cleanup in:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
Findings were:
do not use C99 // comments
space required after that close brace '}'
line over 80 characters
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the ieee80211_crypt.h file that fixed up a space
Errors found by the checkpatch.pl tools
Signed-off-by: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the ieee80211.h file that fixed up a brace, comments
and space Errors found by the checkpatch.pl tools.
Signed-off-by: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the dot11d.h file that fixed up a comments and space
Errors found by the checkpatch.pl tools
Signed-off-by: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the serqt_usb2.c files that fixed space error and
warning found by the checkpatch.pl tools.
Signed-off-by: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John Church <j.church@ymail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Toggling the link carrier is a non sense and is the grossest locking I can
think of. Moreover, it's giving a completely inaccurate status to userspace
who could for example decide to turn the interface down on carrier off
detection.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If we're not associated, we should not send wireless events to let userspace
know that we just left an ESSID, simply because we havent yet joined it.
If we keep on doing that, wpa_supplicant could receive such events while
actually trying to join an ESSID, and thus decide to stop trying. This leads
to a lot of connection failures as this driver seems to be sending GIWAP
events quite a lot.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Getting a probe response after sending a probe request to a specific SSID
doesnt mean we're trying to associate with this SSID.
wpa_supplicant should be the only one deciding when to join an SSID, not the
kernel.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the ioctl.c file that fixes up a brace warning found
by the checkpatch.pl tool
Signed-off-by: Ng Kian Yong <ngky@comp.nus.edu.sg>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This cleans up udlfb a tiny bit.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Cc: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the r8180_rtl8225z2.c file that fixes up errors and
warnings found by the checkpatch.pl tool
Signed-off-by: Olimpiu Pascariu <olimpiu.pascariu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the file quatech_usb2.c that fixes two space before
tabular and one line of more than 80 characters warnings found by
checkpatch.pl
Signed-off-by: Soeren Moeller <soerenmoeller2001@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Greg Kroah-Hartman