To correctly disable hardware window during driver init, both enable bits
(WINCONx_ENWIN in WINCON and SHADOWCON_CHx_ENABLE in SHADOWCON) must be
cleared, otherwise hardware fails to re-enable such window later.
While touching this function, also temporarily disable ctx->suspended flag
to let fimd_wait_for_vblank function really to do its job.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Commit [0] stopped setting fix.smem_start and fix.smem_len when creating
the fbdev.
[0] 2f1eab8d8a
drm/exynos/fbdev: don't set fix.smem/mmio_{start,len}
However, smem_len is used by some userland applications to calculate the
size for mmap. In particular, it is used by xf86-video-fbdev:
http://cgit.freedesktop.org/xorg/xserver/tree/hw/xfree86/fbdevhw/fbdevhw.c?id=xorg-server-1.15.99.903#n571
So, let's restore setting the smem_len to unbreak things for these users.
Note: we are still leaving smem_start set to 0.
Reported-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Reported-by: Gunther Noack <me@guenthernoack.de>
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch adds mipi_phy device node to reset, disable and enable
DSIM and CSIS PHY.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
This patch adds non-continuous clock mode support
Clock mode on Clock Lane is continuous clock by default.
So if we want to transmit data in non-continuous clock mode
to reduce power consumption, then host driver should set
DSIM_CLKLANE_STOP bit. In this case, host controller turns off
HS clock between high speed transmissions.
For this, this patch adds a new bit, DSIM_CLKLANE_STOP, and makes
the host driver sets this bit only in case that dsi->mode_flags has
MIPI_DSI_CLOCK_NON_CONTINUOUS flag.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
This patch adds a new flag, MIPI_DSI-MODE_LPM, to transmit data
in low power. With this flag, msg.flags has MIPI_DSI_MSG_USE_LPM
so that host driver of each SoC can clear or set relevant register
bit for low power transmission.
All host drivers shall support continuous clock behavior on the
Clock Lane, and optionally may support non-continuous clock behavior.
Both of them can transmit data in high speed of low power.
With each clock behavior, non-continuous or continuous clock mode,
host controller will transmit data in high speed by default so if
peripheral wants to receive data in low power, the peripheral driver
should set MIPI_DSI_MODE_LPM flag.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The type of this function is unsigned long, and it is expected
to return proper fout value or zero if something is wrong.
So this patch fixes wrong return value for error cases.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
In commit
commit 896ab1a5d5
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Aug 6 15:04:51 2014 +0200
drm/i915: Fix up checks for aliasing ppgtt
it looks like we accidentally inverted the check that the command
parser should only run when the driver enables some form of PPGTT.
Testcase: igt/gem_exec_parse
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Brad Volkin <bradley.d.volkin@intel.com>
[danvet: Also drop the comment right above, all production vlv now
have hw ppgtt enabled.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Based on the HW team inputs. We can should not wait for the old ack,
Waiting for old ack might fail, when other forcewake came before the
present one is desserted.
for example, if forcewake bit 0 was set and before it could get cleared
forcewake bit 1 got set, HW eventually clear bit 0, when the bit 1
is cleared. i.e, bit 1 is still sent then forcewake bit 0 will still be
set.
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Add comment Ville requested.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If it wasn't never enabled by kernel parameter or platform default
we can avoid reading registers so many times in vain
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Avoid touching fbc register when fbc is disabled.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The ->queue_flip callback is always called from process context, so
plain _irq spinlock variants are enough.
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Only one place looked in need of a bit of polish: hsw_restore_lcpll.
It's used by the runtime pm code and hence is always called from
process context. No irq flag saving required.
Another thing I've stumbled over is that we might need to add a
raw forcewake_get/put helpers which don't grab a runtime pm reference
but just check that the device isn't suspended - we have this duplicated
in the execlist code, too.
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Grab bag for all the special cases:
- i9xx_check_fifo_underruns is only called from crtc_enable hooks,
i.e. process context.
- i915_enable_asle_pipestat is only called from interrupt postinstall
hooks. So again process context.
- gen8_irq_power_well_post_enable is called from the runtime pm code,
which again means process context.
- The open-coded hpd_irq_setup loop in _thaw is also running in process
context.
So for all of them the plain _irq variant is sufficient.
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
irq handlers always run with interrupts locally disabled, so
plain spinlocks is all we need. I've also reviewed again that they
all follow the _irq_handler postfix convention.
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
All the interrupt setup/teardown hooks are always run from plain
process context. So again just the _irq variant is good enough.
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Work functions are in process context, so plain _irq spinlock variants
is all we need.
The hpd reenable work didn't follow the _work/_work_func postfix
naming scheme, so adjust that while at it.
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
->detect callbacks are only ever called from process context, and
there's no fancy nesting going on here. So plain _irq spinlock
variants is what we want.
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
i915_capture_error_state can be called from all kinds of contexts, so
needs the full irqsave dance. But the other two places to grab and
release the error state are only called from process context. So
simplify them to the plaine _irq spinlock versions to clarify the
locking semantics.
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now we tackle the functions also called from interrupt handlers.
- intel_check_page_flip is exclusively called from irq handlers, so a
plain spin_lock is all we need. In i915_irq.c we have the convention
to give all such functions an _irq_handler postfix, but that would
look strange and als be a bit a misleading name. I've opted for a
WARN_ON(!in_irq()) instead.
- The other two places left are called both from interrupt handlers
and from our reset work, so need the full irqsave dance. Annotate
them with a short comment.
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It's good practice to use the more specific versions for irq save
spinlocks both as executable documentation and to enforce saner
design. The _irqsave version really should only be used if the calling
context is unknown and there's a good reason to call a function from
all kinds of places.
This is the first step whice replaces all occurances of _irqsave in
process context with the simpler irq disable/enable variants. We don't
have any funky spinlock nesting going on, especially since the
event_lock is the outermost of the irq/vblank related spinlocks.
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We changed to an interrupt based vblank wait (as opposed to polling)
in:
commit 44bd93a3d367913d883be6abba9a6e51a53c4e90
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri Jul 25 23:36:44 2014 +0200
drm/i915: Use generic vblank wait
However we already had vblank waits on the wrong side of
drm_vblank_{on,off}() calls due to various workarounds, so now we get
a warning more or less every time we do a modeset, and we fail to
wait for the vblank like we should.
Move the drm_vblank_{on,off}() calls back out from
intel_crtc_{enable,disable}_planes() so that all of these vblank waits
return to proper operation. Also move the cxsr wait a bit earlier so
that we can keep the encoder disable after we've turned off vblanks.
Moving stuff out from the plane enable/disable functions seems
preferrable to moving the workaround stuff in since the workarounds are
required only on specific platforms.
While at it switch over to the drm_crtc_ variants of the vblank on/off
functions.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82525
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82490
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Requested by Chris, and also requested to keep it since it's a
more accurate name in his opinion.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This has the upside that it will no longer steal interrupts from the
interrupt handler on pre-g4x. Furthermore this will now scream properly
on all platforms if we don't have hw counters enabled.
v2: Adjust to the new names.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Originally the irq safe spinlock was required because of asle
interrupts. But since
commit 91a60f2071
Author: Jani Nikula <jani.nikula@intel.com>
Date: Thu Oct 31 18:55:48 2013 +0200
drm/i915: move opregion asle request handling to a work queue
there's no need for this any more. So switch to the simpler mutex.
v2: Cite the right commit, spotted by Jani.
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This does not seem to make a difference for the structs in question, but
document the intent.
v2: also pack union child_device_config (Daniel)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Yet another place that wasn't properly transformed when implementing
SOix. While at it convert the checks to WARN_ON on gen5+ (since we
don't have UMS potentially doing stupid things on those platforms).
And also add the corresponding checks to the put functions (again with
a WARN_ON) for gen5+.
v2: Drop the WARNINGS in the irq_put functions (including the existing
one for vebox), Chris convinced me that they're not that terribly
useful.
v3: Don't forget about execlist code.
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
We want to enable/disable display IRQs only if global i915 IRQs are
enabled. To check the latter it's not enough to consult the DRM
dev->irq_enabled flag, since runtime PM can disable/enable IRQs
and it won't adjust this flag only the i915 specific
dev_priv->pm._irqs_disabled flag. Fix this by using the proper
intel_irqs_enabled() helper instead.
Fortunately this didn't cause an actual problem since even if we enabled
display IRQs too early (before enabling global i915 IRQs) the
VLV_MASTER_IER would still be clear masking all IRQs.
This issue was caught by
commit 920dd15a2b2fc60d054646a8a1ffd6aeb6090e05
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Aug 27 10:43:37 2014 +0200
drm/i915: WARN if interrupts aren't on in en/disable_pipestat
Signed-off-by: Imre Deak <imre.deak@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It seems cleaner if we keep CURCNTR at 0 when the cursor is disabled,
so don't set the CURSOR_PIPE_CSC_ENABLE bit unless the cursor is
enabled.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
To make the code a bit more undestandable move the
intel_crtc->cursor_base assignment into the low level update cursor
routines. That's were we compare the current value with the new one
so immediately seeing that it gets assigned only afterwards helps
one to understand that it gets assigned only after the comparison.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If a page isn't allocated as __GFP_MOVEABLE it won't move around, so
no need to grab a reference to lock it into place.
Discovered while reviewing page allocation handling in i915 gem.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
While discussing/reviewing __GFP_MOVEABLE behaviour and interactions
with our various page allocations on irc Chris brought up that the
scratch page isn't allocated as moveable, but we still grab/put a
reference to lock it in place. Which is unecessary.
So drop that.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
7e4bf45dbd99a965c7b5d5944c6dc4246f171eb5 introduced the regression.
We fix it by doing the right assignment of crtc_y
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83747
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The data structure it was supposed to be sanity checking has long gone.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Factor out a piece of code from intel_pipe_set_base() that updates
the pipe size and adjust fitter.
This will help refactor the update primary plane path.
v2: use struct intel_crtc as argument to intel_update_pipe_size()
v3: use 'crtc' as argument name
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Optimize code avoiding helding dev mutex if old fb and current fb
are the same.
v2: take Ville's comments
- move comment along with the pin_and_fence call
- check for error before calling i915_gem_track_fb
- move old_obj != obj to an upper if condition
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The !crtc->enabled case will now be handled by the !visible code,
since the handling is basically the same.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This was lost in
commit e11aa36230
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Wed Jun 18 09:52:55 2014 -0700
drm/i915: use runtime irq suspend/resume in freeze/thaw
which makes the second part of this commen a bit nonsense. Both were
originally added in
commit 15239099d7
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Mar 5 09:50:58 2013 +0100
drm/i915: enable irqs earlier when resuming
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As a preparation for atomic updates we need to split the code to check
everything we are going to commit first. This patch starts the work to
split intel_primary_plane_setplane() into check() and commit() parts.
More work is expected on this to get a better split of the two steps.
Ideally the commit() step should never fail.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Due to the upcoming atomic modesetting feature we need to separate
some update functions into a check step that can fail and a commit
step that should, ideally, never fail.
The commit part can still fail, but that should be solved in another
upcoming patch.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Due to the upcoming atomic modesetting feature we need to separate
some update functions into a check step that can fail and a commit
step that should, ideally, never fail.
This commit splits intel_update_plane() and its commit part can still
fail due to the fb pinning procedure.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This new struct will be the storage of src and dst coordinates
between the check and commit stages of a plane update.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Now that vlv has runtime pm we kinda should check for that like on the
pch split platforms. Looks like this was simply lost in the vlv rpm
enabling.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Use full PPGTT as the default option in gen7.
Note that aliasing PPGTT is the default option for gen8 (see
HAS_PPGTT) since we're still fighting troubles around context
switching and execlists.
This may well come back to bite me later.
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
[danvet: Explain that gen8 full ppgtt is blocked on execlists for
now.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
If something while getting panel CRC this means that probably hw I/O error
so hw is busted and try again shouldn't help much.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Based upon a patch from Deepak, but reworked to only apply on gen7+
and with the logic a bit clarified.
v2: Fix s/SHIFT/MASK/ fumble that Ville spotted.
Cc: Deepak S <deepak.s@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Marek Szyprowski