The recent patch that implements table printing on a keypress introduced a
regression - turbostat prints the table almost continuously if it is run from a
daemon program.
The problem is also easy to reproduce like this:
echo | turbostat
The reason is that we cannot assume that stdin is always a TTY. It can be many
things.
This patch adds fixes the problem by limiting the new keypress functionality to
TTYs only. If stdin is not a TTY, we just sleep for the full interval time.
While on it, clean-up 'do_sleep()' to return no value, as callers do not expect
that anyway.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
In turbostat interval mode, a newline typed on standard input
will now conclude the current interval. Data will immediately
be collected and printed for that interval, and the next interval
will be started.
This is similar to the recently added SIGUSR1 feature.
But that is for use by programs, while this is for interactive use.
Signed-off-by: Len Brown <len.brown@intel.com>
Interval-mode turbostat now catches and discards SIGUSR1.
Thus, SIGUSR1 can be used to tell turbostat to cut short
the current measurement interval. Turbostat will then start
the next measurement interval using the regular interval length.
This can be used to give turbostat variable intervals.
Invoke turbostat with --interval LARGE_NUMBER_SEC
and have a program that has permission to send it a SIGUSR1
always before LARGE_NUMBER_SEC expires.
It may also be useful to use "--enable Time_Of_Day_Seconds"
to observe the actual interval length.
Signed-off-by: Len Brown <len.brown@intel.com>
Add a Time_Of_Day_Seconds column showing when measurement
for each row was completed. Units are [sec.subsec] since Epoch,
as reported by gettimeofday(2).
While useful to correlate turbostat output with other tools,
this built-in column is disabled, by default.
Add the "--enable" option to enable such disabled-by-default
built-in columns:
"--enable Time_Of_Day_Seconds"
"--enable usec"
"--enable all", will enable all disabled-by-defauilt built-in counters.
When "--debug" is used, all disabled-by-default columns are enabled,
unless explicitly skipped using "--hide"
Signed-off-by: Len Brown <len.brown@intel.com>
Turbostat neglects to display all package C-states for some Skylake Xeon BIOS configurations.
This is due to a typo in the table decoding MSR_PKG_CST_CONFIG_CONTROL (0x000000e2)
Here we fix that typo, according to Intel SDM, vol 4, Table 2-41 -
"MSRs Supported by Intel® Xeon® Processor Scalable Family with DisplayFamily_DisplayModel 06_55H".
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add test for USB over IP driver. This test runs several tests on a device
specified in the -b <busid> argument and path to the usbip tools.
usbip_test.sh -b <busid> -p <usbip tools path>
e.g:
cd tools/testing selftests/drivers/usb/usbip
sudo ./usbip_test.sh -b 3-10.2 -p <yoursrctree>/tools/usb/usbip
This test should be run as root and user should build usbip tools before
running the test.
The usbip test isn't included in the Kselftest run as it requires user to
specify a device to run tests on.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usbip detach doesn't check for invalid ports and ports that are already
detached. It attempts to remove state file(s) without validating the port
and sends detach request to the driver for ports that are already detached.
Add check for invalid ports (port > maxports) and ports that are already
detached (status == VDEV_ST_NULL). Don't remove state files and don't send
detach request for invalid ports and ports that are already detached.
Add error and information messages that make sense.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
detach_port() fails to call usbip_vhci_driver_close() from its error
path after usbip_vhci_detach_device() returns failure, leaking memory
allocated in usbip_vhci_driver_open() and holding udev_context and udev
references. Fix it to call usbip_vhci_driver_close().
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As the amount of available ports varies by the kernels build
configuration. To remove the limitation of the fixed 128 ports
we allocate the amount of idevs by using the number we get
from the kernel.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
prime_numbers modules search and skip logic removes the module instead
of searching for it. Fix it.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
The intel_pstate related testing script need root level privileges
when trying to access certain file for the successful execution of
the script.But this is not the case always like when using evaluation
only mode, which only require user level privilege.
This patch is to notify the user about the privilege the script
demands for the successful execution of the test.
Signed-off-by: Jeffrin Jose T (Rajagiri SET) <ahiliation@gmail.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
The test verifies that when there is active TCP connection, the
memory.stat.sock and memory.current values are close.
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Additional message along with an error message which is more
verbose for debug support from aperf.c and updated with the
new return value "KSFT_SKIP".
Signed-off-by: Jeffrin Jose T [Rajagiri SET] <ahiliation@gmail.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
cg_name(const char *root, const char *name) is always called with
non-empty root and name arguments, so there is no sense in checking
it in the function body (after using in strlen()).
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Using coreutils' pr, a nicer table is printed out with the
results.
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
A few changes improve the overall usability of the test:
* fix a hard-coded maximum frequency (3300),
* don't adjust the CPU frequency if only evaluating results,
* fix a comparison for multiple frequencies.
A symptom of that last issue looked like this:
./run.sh: line 107: [: too many arguments
./run.sh: line 110: 3099
3099
3100-3100: syntax error in expression (error token is \"3099
3100-3100\")
Because a check will count how many differente frequencies
there are among the CPUs of the system, and after they are
tallied another read is performed, which might produce
different results.
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
The new test verifies that memory.swap.max and memory.swap.current behave
as expected for simple allocation scenarios
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Cgroups are used for controlling the physical resource distribution
(memory, CPU, io, etc) and often are used as basic building blocks
for large distributed computing systems. Even small differences
in the actual behavior may lead to significant incidents.
The codebase is under the active development, which will unlikely
stop at any time soon. Also it's scattered over different kernel
subsystems, which makes regressions more probable.
Given that, the lack of any tests is crying.
This patch implements some basic tests for the memory controller,
as well as a minimal required framework. It doesn't pretend for a
very good coverage, but pretends to be a starting point.
Hopefully, any following significant changes will include corresponding
tests.
Tests for CPU and io controllers, as well as cgroup core
are next in the todo list.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: kernel-team@fb.com
Cc: linux-kselftest@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Split normal memfd and hugetlbfs tests to improve the test reporting.
Remove run_fuse_test.sh and memfd_test from run_tests.sh and add them
to the Makefile.
Add memfd_test to TEST_GEN_PROGS to be run separately.
Rename run_tests.sh to run_hugetlbfs_test.sh
Add run_fuse_test.sh and run_hugetlbfs_test.sh to TEST_PROGS
The report for non-root run wth this change is:
TAP version 13
selftests: memfd: memfd_test
========================================
memfd: CREATE
memfd: BASIC
memfd: SEAL-WRITE
memfd: SEAL-SHRINK
memfd: SEAL-GROW
memfd: SEAL-RESIZE
memfd: SHARE-DUP
memfd: SHARE-MMAP
memfd: SHARE-OPEN
memfd: SHARE-FORK
memfd: SHARE-DUP (shared file-table)
memfd: SHARE-MMAP (shared file-table)
memfd: SHARE-OPEN (shared file-table)
memfd: SHARE-FORK (shared file-table)
memfd: DONE
ok 1..1 selftests: memfd: memfd_test [PASS]
selftests: memfd: run_fuse_test.sh
========================================
opening: ./mnt/memfd
fuse: DONE
ok 1..2 selftests: memfd: run_fuse_test.sh [PASS]
selftests: memfd: run_hugetlbfs_test.sh
========================================
Please run memfd with hugetlbfs test as root
not ok 1..3 selftests: memfd: run_hugetlbfs_test.sh [SKIP]
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When net test is skipped because of unmet dependencies and/or unsupported
configuration, it returns 0 which is treated as a pass by the Kselftest
framework. This leads to false positive result even when the test could
not be run.
Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.
Kselftest framework SKIP code is 4 and the framework prints appropriate
messages to indicate that the test is skipped.
Change psock_tpacket to use ksft_exit_skip() when a non-root user runs
the test and add an explicit check for root and a clear message, instead
of failing the test when /sys/power/state file open fails.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When mqueue test is skipped because of unmet dependencies and/or
unsupported configuration, it exits with error which is treated as
a fail by the Kselftest framework. This leads to false negative
result even when the test could not be run.
Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.
Change it to use ksft_exit_skip() when the test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When memory-hotplug test is skipped because of unmet dependencies and/or
unsupported configuration, it returns non-zero value hich is treated as a
fail by the Kselftest framework. This leads to false negative result even
when the test could not be run.
Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.
Kselftest framework SKIP code is 4 and the framework prints appropriate
messages to indicate that the test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When memfd test is skipped because of unmet dependencies and/or unsupported
configuration, it returns non-zero value which is treated as a fail by the
Kselftest framework. This leads to false negative result even when the test
could not be run.
Change it to return kselftest skip code when a test gets skipped to clearly
report that the test could not be run.
Added an explicit check for root user at the start of memfd hugetlbfs test
and return skip code if a non-root user attempts to run it.
In addition, return skip code when not enough huge pages are available to
run the test.
Kselftest framework SKIP code is 4 and the framework prints appropriate
messages to indicate that the test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When membarrier test is skipped because of unmet dependencies and/or
unsupported configuration, it exits with error which is treated as a
fail by the Kselftest framework. This leads to false negative result
even when the test could not be run.
Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.
Change it to use ksft_exit_skip() when the test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When media_tests test is skipped because of unmet dependencies and/or
unsupported configuration, it exits with error which is treated as a
fail by the Kselftest framework. This leads to false negative result
even when the test could not be run.
Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.
Change it to use ksft_exit_skip() when the test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When locking test is skipped because of unmet dependencies and/or
unsupported configuration, it exits with error which is treated as
a fail by the Kselftest framework. This leads to false negative
result even when the test could not be run.
Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.
Added an explicit search for ww_mutex module and return skip code if
it isn't found to differentiate between the failure to load the module
condition and module not found condition.
Kselftest framework SKIP code is 4 and the framework prints appropriate
messages to indicate that the test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When lib test(s) is skipped because of unmet dependencies and/or
unsupported configuration, it returns non-zero value hich is treated
as a fail by the Kselftest framework. This leads to false negative result
even when the test could not be run.
Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.
Kselftest framework SKIP code is 4 and the framework prints appropriate
messages to indicate that the test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When kvm test is skipped because of unmet dependencies and/or unsupported
configuration, it exits with error which is treated as a fail by the
Kselftest framework. This leads to false negative result even when the test
could not be run.
Change it to return kselftest skip code when a test gets skipped to clearly
report that the test could not be run.
Change it to use ksft_exit_skip() when the test is skipped. In addition,
refine test_assert() message to include strerror() string and add explicit
check for EACCES to cleary identify when test doesn't run when access is
denied to resources required e.g: open /dev/kvm failed, rc: -1 errno: 13
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When kmod test is skipped because of unmet dependencies and/or unsupported
configuration, it returns 0 which is treated as a pass by the Kselftest
framework. This leads to false positive result even when the test could
not be run. It returns fail in some cases when test is skipped. Either way,
it is incorrect and incosnistent reporting.
Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.
Kselftest framework SKIP code is 4 and the framework prints appropriate
messages to indicate that the test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Reviewed-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When ipc test is skipped because of unmet dependencies and/or
unsupported configuration, it exits with error which is treated as
a fail by the Kselftest framework. This leads to false negative
result even when the test could not be run.
Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.
Change it to use ksft_exit_skip() when the test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When intel_pstate test is skipped because of unmet dependencies and/or
unsupported configuration, it returns 0 which is treated as a pass
by the Kselftest framework. This leads to false positive result even
when the test could not be run.
Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.
Kselftest framework SKIP code is 4 and the framework prints appropriate
messages to indicate that the test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When gpio test is skipped because of unmet dependencies and/or
unsupported configuration, it exits with error which is treated as
a fail by the Kselftest framework. This leads to false negative
result even when the test could not be run.
Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.
Kselftest framework SKIP code is 4 and the framework prints appropriate
messages to indicate that the test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When firmware test(s) get skipped because of unmet dependencies and/or
unsupported configuration, it returns 0 which is treated as a pass
by the Kselftest framework. This leads to false positive result even
when the test could not be run.
Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.
Kselftest framework SKIP code is 4 and the framework prints appropriate
messages to indicate that the test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Reviewed-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When devpts_pts test is skipped because of unmet dependencies and/or
unsupported configuration, it exits with error which is treated as
a fail by the Kselftest framework. This leads to false negative
result even when the test could not be run.
In another case, it returns pass for a skipped test reporting a false
postive.
Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.
Change it to use ksft_exit_skip() when test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When execveat test is skipped because of unmet dependencies and/or
unsupported configuration, it exits with error which is treated as
a fail by the Kselftest framework. This leads to false negative
result even when the test could not be run.
Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.
Change it to use ksft_exit_skip() when kernel doesn't support execveat.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When efivarfs test is skipped because of unmet dependencies and/or
unsupported configuration, it returns 0 which is treated as a pass
by the Kselftest framework. This leads to false positive result even
when the test could not be run.
Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.
Kselftest framework SKIP code is 4 and the framework prints appropriate
messages to indicate that the test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When cpufreq test is skipped because of unmet dependencies and/or
unsupported configuration, it exits with error which is treated as
a fail by the Kselftest framework. This leads to false negative
result even when the test could not be run.
Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.
Kselftest framework SKIP code is 4 and the framework prints appropriate
messages to indicate that the test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When cpu-on-off-test is skipped because of unmet dependencies and/or
unsupported configuration, it returns 0 which is treated as a pass
by the Kselftest framework. This leads to false positive result even
when the test could not be run.
Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.
Kselftest framework SKIP code is 4 and the framework prints appropriate
messages to indicate that the test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When step_after_suspend_test is skipped because of unmet dependencies
and/or unsupported configuration, it exits with error which is treated
as a fail by the Kselftest framework. This leads to false negative result
even when the test could not be run.
Change it to return kselftest skip code when a test gets skipped to clearly
report that the test could not be run.
Change it to use ksft_exit_skip() when a non-root user runs the test and
add an explicit check for root and a clear message, instead of failing
the test when /sys/power/state file open fails.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When ion test is skipped because of unmet dependencies and/or unsupported
configuration, it returns 0 which is treated as a pass by the Kselftest
framework. This leads to false positive result even when the test could
not be run.
Change it to return kselftest skip code when a test gets skipped to
clearly report that the test could not be run.
Kselftest framework SKIP code is 4 and the framework prints appropriate
messages to indicate that the test is skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Acked-by: Pintu Agarwal <pintu.ping@gmail.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Delete RUN_TESTS and EMIT_TESTS overrides and use common defines in
lib.mk. Common defines work after making the change the test to run
with ratio=2 as the default mode to be able to invoke the test without
the "-r 2" argument from the common RUN_TESTS and EMIT_TESTS.
The run_full_tests target now calls the test with "-r 10".
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Reviewed-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Lei.Yang@windriver.com
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Delete RUN_TESTS and EMIT_TESTS overrides and use common defines in lib.mk.
The overrides are in place to call mq_open_tests with queue name argument.
The change to delete overrides is coupled with a change to mq_open_tests
to use default queue name when it is called without one.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Reviewed-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Delete RUN_TESTS and EMIT_TESTS overrides and use common defines in
lib.mk. Add new run_tests.sh to do the dependency checks the custom
RUN_TESTS did. Common defines work with the run_tests.sh set as the
TEST_PROGS and defining unprivileged-remount-test in TEST_GEN_FILES.
Kselftest framework builds and installs TEST_GEN_FILES and doesn't run
them via RUN_TESTS and include it in EMIT_TESTS. With this change the
new run_tests.sh runs the test after checking dependencies.
This change also adds Skip handling to return kselftest skip code when
test is skipped to clearly identify when the test is skipped instead of
reporting it as failed.
Output with this change:
TAP version 13
selftests: mount: run_tests.sh
========================================
WARN: No /proc/self/uid_map exist, test skipped.
not ok 1..1 selftests: mount: run_tests.sh [SKIP]
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Reviewed-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Delete RUN_TESTS and EMIT_TESTS overrides and use common defines in
lib.mk. Common defines work just fine and there is no need to define
custom overrides.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Reviewed-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Delete RUN_TESTS and EMIT_TESTS overrides and use common defines in
lib.mk. Common defines work just fine and there is no need to define
custom overrides.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
KSFT_SKIP points to KSFT_PASS resulting in reporting skipped tests as
Passed, when test programs exit with KSFT_SKIP or call ksft_exit_skip().
If tests are skipped because of unmet dependencies and/or unsupported
configuration, reporting them as passed leads to too many false positives.
Fix it to return a skip code of 4 to clearly differentiate the skipped
tests.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Similar to what RUN_TESTS does, change EMIT_TESTS to check for execute
bit and emit code to print warnings if test isn't executable to the
the run_kselftest.sh.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
EMIT_TESTS which is the common function that implements run_tests target,
treats all non-zero return codes from tests as failures. When tests are
skipped with non-zero return code, because of unmet dependencies and/or
unsupported configuration, it reports them as failed. This will lead to
too many false negatives even on the tests that couldn't be run.
EMIT_TESTS is changed to test for SKIP=4 return from tests to enable
the framework for individual tests to return special SKIP code.
Tests will be changed as needed to report SKIP instead FAIL/PASS when
they get skipped.
Currently just the test name is printed in the RUN_TESTS output. For
example, when raw_skew sub-test from timers tests in run, the output
shows just raw_skew. Include main test name when printing sub-test
results.
In addition, remove duplicate strings for printing common information with
a new for the test header information.
With this change run_kelftest.sh output for breakpoints test will be:
TAP version 13
Running tests in breakpoints
========================================
selftests: breakpoints: step_after_suspend_test
not ok 1..1 selftests: breakpoints: step_after_suspend_test [SKIP]
selftests: breakpoints: breakpoint_test
ok 1..2 selftests: breakpoints: breakpoint_test [PASS]
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Currently just the test name is printed in the RUN_TESTS output. For
example, when raw_skew sub-test from timers tests in run, the output
shows just raw_skew. Include main test name when printing sub-test
results.
In addition, remove duplicate strings for printing common information
with a new for the test header information.
Before the change:
selftests: raw_skew
========================================
WARNING: ADJ_OFFSET in progress, this will cause inaccurate results
Estimating clock drift: -20.616(est) -20.586(act) [OK]
Pass 0 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
1..0
ok 1..7 selftests: raw_skew [PASS]
After the change:
selftests: timers: raw_skew
========================================
WARNING: ADJ_OFFSET in progress, this will cause inaccurate results
Estimating clock drift: -19.794(est) -19.896(act) [OK]
Pass 0 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
1..0
ok 1..7 selftests: timers: raw_skew [PASS]
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
RUN_TESTS function has grown and becoming harder to maintain. Move
the code that runs and tests for returns codes to a new function
and call it from RUN_TESTS.
A new RUN_TEST_PRINT_RESULT is created to simplify RUN_TESTS and make it
easier to add handling for other return codes as needed.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
RUN_TESTS which is the common function that implements run_tests target,
treats all non-zero return codes from tests as failures. When tests are
skipped with non-zero return code, because of unmet dependencies and/or
unsupported configuration, it reports them as failed. This will lead to
too many false negatives even on the tests that couldn't be run.
RUN_TESTS is changed to test for SKIP=4 return from tests to enable the
framework for individual tests to return special SKIP code.
Tests will be changed as needed to report SKIP instead FAIL/PASS when
they get skipped.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Refine RUN_TESTS define's output block for summary and non-summary code
to remove duplicate code and make it readable.
cd `dirname $$TEST` > /dev/null; and cd - > /dev/null; are moved
to common code block and indentation fixed.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Rework rtctest to use the test harness to better handle skipping tests
(e.g. when alarms are not available). Also, it now handles timeout so it
will not block expecting an alarm that never comes.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Move the RTC tests out of the timers folder as they are mostly unrelated.
Keep rtcpie in timers as it only test hrtimers.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
After the test ends, restore the PIE rate to its previous value to be less
disruptive.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Since commit 6610e0893b ("RTC: Rework RTC code to use timerqueue for
events"), PIE are completely handled using hrtimers, without actually using
any underlying hardware RTC.
Move PIE testing out of rtctest. It still depends on the presence of an RTC
(to access the device file) but doesn't depend on it actually working.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
We were picking up the wrong header should use asm/ioctls.h form the kernel
and not the header from the system (sys/ioctl.h). In the current code we
added the correct include and we added the kernel headers path to the CFLAGS.
Fixes: ce290a1960 ("selftests: add devpts selftests")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Some toolchains need -no-pie to build all tests, others do not support
the -no-pie flag at all. Therefore, add another test for the
availability of the flag.
This amends commit 3346a6a4e5
("selftests: x86: sysret_ss_attrs doesn't build on a PIE build").
Signed-off-by: Florian Weimer <fweimer@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Trivial fix to spelling mistake in message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Trivial fix to spelling mistake in message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
In the perf.data HEADER_CPUDESC feadure header we store first the number
of available CPUs in the system, then the number of CPUs at the time of
writing the header, not the other way around.
Reported-by: Thomas-Mich Richter <tmricht@linux.ibm.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Lakshman Annadorai <lakshmana@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-j7o92acm2vnxjv70y4o3swoc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
ARM CoreSight auxtrace uses 'sample->addr' to record the target address
for branch instructions, so the data of 'sample->addr' is required for
tracing data analysis.
This commit collects data of 'sample->addr' into perf sample dict,
finally can be used for python script for parsing event.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: Tor Jeremiassen <tor@ti.com>
Cc: coresight@lists.linaro.org
Cc: kim.phillips@arm.co
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Link: http://lkml.kernel.org/r/1527497103-3593-3-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an explanation of each cpu's core and socket identifier to the
perf.data file format documentation.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180528074433.16652-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tail of a queue is supposed to be pointing to the next available
slot in a queue. In this implementation the tail is incremented before
it is used and as such points to the last used element, something that
has the immense advantage of centralizing tail management at a single
location and eliminating a lot of redundant code.
But this needs to be taken into consideration on the dequeueing side
where the head also needs to be incremented before it is used, or the
first available element of the queue will be skipped.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Walker <robert.walker@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1527289854-10755-1-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf_object__open()/bpf_object__open_buffer can return error pointer or
NULL, check the return values with IS_ERR_OR_NULL() in bpf__prepare_load
and bpf__prepare_load_buffer
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: netdev@vger.kernel.org
Link: https://lkml.kernel.org/n/tip-psf4xwc09n62al2cb9s33v9h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "perf test Session topology" entry fails with core dump on s390. The root
cause is a NULL pointer dereference in function check_cpu_topology() line 76
(or line 82 without -v).
The session->header.env.cpu variable is NULL because on s390 function
process_cpu_topology() returns with error:
socket_id number is too big.
You may need to upgrade the perf tool.
and releases the env.cpu variable via zfree() and sets it to NULL.
Here is the gdb output:
(gdb) n
76 pr_debug("CPU %d, core %d, socket %d\n", i,
(gdb) n
Program received signal SIGSEGV, Segmentation fault.
0x00000000010f4d9e in check_cpu_topology (path=0x3ffffffd6c8
"/tmp/perf-test-J6CHMa", map=0x14a1740) at tests/topology.c:76
76 pr_debug("CPU %d, core %d, socket %d\n", i,
(gdb)
Make sure the env.cpu variable is not used when its NULL.
Test for NULL pointer and return TEST_SKIP if so.
Output before:
[root@p23lp27 perf]# ./perf test -F 39
39: Session topology :Segmentation fault (core dumped)
[root@p23lp27 perf]#
Output after:
[root@p23lp27 perf]# ./perf test -vF 39
39: Session topology :
--- start ---
templ file: /tmp/perf-test-Ajx59D
socket_id number is too big.You may need to upgrade the perf tool.
---- end ----
Session topology: Skip
[root@p23lp27 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180528073657.11743-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf stat doesn't count the uncore event aliases from the same uncore
block in a group, for example:
perf stat -e '{unc_m_cas_count.all,unc_m_clockticks}' -a -I 1000
# time counts unit events
1.000447342 <not counted> unc_m_cas_count.all
1.000447342 <not counted> unc_m_clockticks
2.000740654 <not counted> unc_m_cas_count.all
2.000740654 <not counted> unc_m_clockticks
The output is very misleading. It gives a wrong impression that the
uncore event doesn't work.
An uncore block could be composed by several PMUs. An uncore event alias
is a joint name which means the same event runs on all PMUs of a block.
Perf doesn't support mixed events from different PMUs in the same group.
It is wrong to put uncore event aliases in a big group.
The right way is to split the big group into multiple small groups which
only include the events from the same PMU.
Only uncore event aliases from the same uncore block should be specially
handled here. It doesn't make sense to mix the uncore events with other
uncore events from different blocks or even core events in a group.
With the patch:
# time counts unit events
1.001557653 140,833 unc_m_cas_count.all
1.001557653 1,330,231,332 unc_m_clockticks
2.002709483 85,007 unc_m_cas_count.all
2.002709483 1,429,494,563 unc_m_clockticks
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1525727623-19768-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for recently added BPF_CGROUP_UDP4_SENDMSG and
BPF_CGROUP_UDP6_SENDMSG attach types to bpftool, update documentation
and bash completion.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This is simple test over rc-loopback.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
These are minor edits for the eBPF helpers documentation in
include/uapi/linux/bpf.h.
The main fix consists in removing "BPF_FIB_LOOKUP_", because it ends
with a non-escaped underscore that gets interpreted by rst2man and
produces the following message in the resulting manual page:
DOCUTILS SYSTEM MESSAGES
System Message: ERROR/3 (/tmp/bpf-helpers.rst:, line 1514)
Unknown target name: "bpf_fib_lookup".
Other edits consist in:
- Improving formatting for flag values for "bpf_fib_lookup()" helper.
- Emphasising a parameter name in description of the return value for
"bpf_get_stack()" helper.
- Removing unnecessary blank lines between "Description" and "Return"
sections for the few helpers that would use it, for consistency.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add tests verifying prefix routes are inserted with expected metric.
IPv6 prefix route tests
TEST: Default metric [ OK ]
TEST: User specified metric on first device [ OK ]
TEST: User specified metric on second device [ OK ]
TEST: Delete of address on first device [ OK ]
TEST: Modify metric of address [ OK ]
TEST: Prefix route removed on link down [ OK ]
TEST: Prefix route with metric on link up [ OK ]
IPv4 prefix route tests
TEST: Default metric [ OK ]
TEST: User specified metric on first device [ OK ]
TEST: User specified metric on second device [ OK ]
TEST: Delete of address on first device [ OK ]
TEST: Modify metric of address [ OK ]
TEST: Prefix route removed on link down [ OK ]
TEST: Prefix route with metric on link up [ OK ]
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test that tests a trigger that is initiated by a kernel event
(sched_waking) and compared to a write to the trace_marker.
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add a couple of tests that test the trace_marker histogram triggers.
One does a straight histogram test, the other will create a synthetic event
and test the latency between two different writes (using filters to
differentiate between them).
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The reset_trigger() function breaks up the command by a space ' '. This is
useful to ignore the '[active]' word for triggers when removing them. But if
the trigger has a filter (ie. "if prio < 10") then the filter needs to be
attached to the line that is written into the trigger file to remove it. But
the truncation removes the filter and the triggers are not cleared properly.
Before, reset_trigger() did this:
# echo 'hist:keys=common_pid if prev_prio < 10' > events/sched/sched_switch/trigger
# echo 'hist:keys=common_pid if next_prio < 10' >> events/sched/sched_switch/trigger
# cat events/sched/sched_switch/trigger
hist:keys=common_pid:vals=hitcount:sort=hitcount:size=2048 if prev_prio < 10 [active]
hist:keys=common_pid:vals=hitcount:sort=hitcount:size=2048 if next_prio < 10 [active]
reset_trigger() {
echo '!hist:keys=common_pid:vals=hitcount:sort=hitcount:size=2048' >> events/sched/sched_switch/trigger
}
# cat events/sched/sched_switch/trigger
hist:keys=common_pid:vals=hitcount:sort=hitcount:size=2048 if prev_prio < 10 [active]
hist:keys=common_pid:vals=hitcount:sort=hitcount:size=2048 if next_prio < 10 [active]
After, where it includes the filter:
reset_trigger() {
echo '!hist:keys=common_pid:vals=hitcount:sort=hitcount:size=2048 if prev_prio < 10' >> events/sched/sched_switch/trigger
}
# cat events/sched/sched_switch/trigger
hist:keys=common_pid:vals=hitcount:sort=hitcount:size=2048 if next_prio < 10 [active]
Fixes: cfa0963dc4 ("kselftests/ftrace : Add event trigger testcases")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The trigger code is picky in how it can be disabled as there may be
dependencies between different events and synthetic events. Change the order
on how triggers are reset.
1) Reset triggers of all synthetic events first
2) Remove triggers with actions attached to them
3) Remove all other triggers
If this order isn't followed, then some triggers will not be reset, and an
error may happen because a trigger is busy.
Cc: stable@vger.kernel.org
Fixes: cfa0963dc4 ("kselftests/ftrace : Add event trigger testcases")
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Add selftest for BPF_CGROUP_UDP4_SENDMSG and BPF_CGROUP_UDP6_SENDMSG
attach types.
Try to sendmsg(2) to specific IP:port and test that:
* source IP is overridden as expected.
* remote IP:port pair is overridden as expected;
Both UDPv4 and UDPv6 are tested.
Output:
# test_sock_addr.sh 2>/dev/null
Wait for testing IPv4/IPv6 to become available ... OK
... pre-existing test-cases skipped ...
Test case: sendmsg4: load prog with wrong expected attach type .. [PASS]
Test case: sendmsg4: attach prog with wrong attach type .. [PASS]
Test case: sendmsg4: rewrite IP & port (asm) .. [PASS]
Test case: sendmsg4: rewrite IP & port (C) .. [PASS]
Test case: sendmsg4: deny call .. [PASS]
Test case: sendmsg6: load prog with wrong expected attach type .. [PASS]
Test case: sendmsg6: attach prog with wrong attach type .. [PASS]
Test case: sendmsg6: rewrite IP & port (asm) .. [PASS]
Test case: sendmsg6: rewrite IP & port (C) .. [PASS]
Test case: sendmsg6: IPv4-mapped IPv6 .. [PASS]
Test case: sendmsg6: deny call .. [PASS]
Summary: 27 PASSED, 0 FAILED
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
test_sock_addr was not easy to extend since it was focused on sys_bind
and sys_connect quite a bit.
Reorganized it so that it'll be easier to cover new test-cases for
`BPF_PROG_TYPE_CGROUP_SOCK_ADDR`:
- decouple test-cases so that only one BPF prog is tested at a time;
- check programmatically that local IP:port for sys_bind, source IP and
destination IP:port for sys_connect are rewritten property by tested
BPF programs.
The output of new version:
# test_sock_addr.sh 2>/dev/null
Wait for testing IPv4/IPv6 to become available ... OK
Test case: bind4: load prog with wrong expected attach type .. [PASS]
Test case: bind4: attach prog with wrong attach type .. [PASS]
Test case: bind4: rewrite IP & TCP port in .. [PASS]
Test case: bind4: rewrite IP & UDP port in .. [PASS]
Test case: bind6: load prog with wrong expected attach type .. [PASS]
Test case: bind6: attach prog with wrong attach type .. [PASS]
Test case: bind6: rewrite IP & TCP port in .. [PASS]
Test case: bind6: rewrite IP & UDP port in .. [PASS]
Test case: connect4: load prog with wrong expected attach type .. [PASS]
Test case: connect4: attach prog with wrong attach type .. [PASS]
Test case: connect4: rewrite IP & TCP port .. [PASS]
Test case: connect4: rewrite IP & UDP port .. [PASS]
Test case: connect6: load prog with wrong expected attach type .. [PASS]
Test case: connect6: attach prog with wrong attach type .. [PASS]
Test case: connect6: rewrite IP & TCP port .. [PASS]
Test case: connect6: rewrite IP & UDP port .. [PASS]
Summary: 16 PASSED, 0 FAILED
(stderr contains errors from libbpf when testing load/attach with
invalid arguments)
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
libbpf can guess prog type and expected attach type based on section
name. Add hints for "cgroup/sendmsg4" and "cgroup/sendmsg6" section
names.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Sync new `BPF_CGROUP_UDP4_SENDMSG` and `BPF_CGROUP_UDP6_SENDMSG`
attach types to tools/.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This test verifies that the AMR, IAMR and UAMOR are being written to a
process' core file.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
[mpe: Simplify make rule]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This test exercises read and write access to the AMR, IAMR and UAMOR.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
[mpe: Simplify make rule]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
install_headers target should contain all headers that are part of
libbpf. Add missing btf.h
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
general changes:
- make python dependent on version2 to enable clearlinux
- upgrade dmesg error/warning extraction to be more detailed
- enable logs generated from -cmd runs to be processed in gzip form
- add notification on power mode entry failure into the timeline
- add -battery option to show if battery is connected and its charge
summary changes (output of -summary):
- add -genhtml option to regenerate missing timelines from logs found
- add min/max/median/avg data to the summary page with links to the data
- add highlight to minimum, maximum, and median tests
- add result column to summary (pass or fail) with red highlight on fail
- add issues column to summary with a list of dmesg err/warn/bugs
Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge misc fixes from Andrew Morton:
"16 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kasan: fix memory hotplug during boot
kasan: free allocated shadow memory on MEM_CANCEL_ONLINE
checkpatch: fix macro argument precedence test
init/main.c: include <linux/mem_encrypt.h>
kernel/sys.c: fix potential Spectre v1 issue
mm/memory_hotplug: fix leftover use of struct page during hotplug
proc: fix smaps and meminfo alignment
mm: do not warn on offline nodes unless the specific node is explicitly requested
mm, memory_hotplug: make has_unmovable_pages more robust
mm/kasan: don't vfree() nonexistent vm_area
MAINTAINERS: change hugetlbfs maintainer and update files
ipc/shm: fix shmat() nil address after round-down when remapping
Revert "ipc/shm: Fix shmat mmap nil-page protection"
idr: fix invalid ptr dereference on item delete
ocfs2: revert "ocfs2/o2hb: check len for bio_add_page() to avoid getting incorrect bio"
mm: fix nr_rotate_swap leak in swapon() error case
Pull networking fixes from David Miller:
"Let's begin the holiday weekend with some networking fixes:
1) Whoops need to restrict cfg80211 wiphy names even more to 64
bytes. From Eric Biggers.
2) Fix flags being ignored when using kernel_connect() with SCTP,
from Xin Long.
3) Use after free in DCCP, from Alexey Kodanev.
4) Need to check rhltable_init() return value in ipmr code, from Eric
Dumazet.
5) XDP handling fixes in virtio_net from Jason Wang.
6) Missing RTA_TABLE in rtm_ipv4_policy[], from Roopa Prabhu.
7) Need to use IRQ disabling spinlocks in mlx4_qp_lookup(), from Jack
Morgenstein.
8) Prevent out-of-bounds speculation using indexes in BPF, from
Daniel Borkmann.
9) Fix regression added by AF_PACKET link layer cure, from Willem de
Bruijn.
10) Correct ENIC dma mask, from Govindarajulu Varadarajan.
11) Missing config options for PMTU tests, from Stefano Brivio"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (48 commits)
ibmvnic: Fix partial success login retries
selftests/net: Add missing config options for PMTU tests
mlx4_core: allocate ICM memory in page size chunks
enic: set DMA mask to 47 bit
ppp: remove the PPPIOCDETACH ioctl
ipv4: remove warning in ip_recv_error
net : sched: cls_api: deal with egdev path only if needed
vhost: synchronize IOTLB message with dev cleanup
packet: fix reserve calculation
net/mlx5: IPSec, Fix a race between concurrent sandbox QP commands
net/mlx5e: When RXFCS is set, add FCS data into checksum calculation
bpf: properly enforce index mask to prevent out-of-bounds speculation
net/mlx4: Fix irq-unsafe spinlock usage
net: phy: broadcom: Fix bcm_write_exp()
net: phy: broadcom: Fix auxiliary control register reads
net: ipv4: add missing RTA_TABLE to rtm_ipv4_policy
net/mlx4: fix spelling mistake: "Inrerface" -> "Interface" and rephrase message
ibmvnic: Only do H_EOI for mobility events
tuntap: correctly set SOCKWQ_ASYNC_NOSPACE
virtio-net: fix leaking page for gso packet during mergeable XDP
...
If the radix tree underlying the IDR happens to be full and we attempt
to remove an id which is larger than any id in the IDR, we will call
__radix_tree_delete() with an uninitialised 'slot' pointer, at which
point anything could happen. This was easiest to hit with a single
entry at id 0 and attempting to remove a non-0 id, but it could have
happened with 64 entries and attempting to remove an id >= 64.
Roman said:
The syzcaller test boils down to opening /dev/kvm, creating an
eventfd, and calling a couple of KVM ioctls. None of this requires
superuser. And the result is dereferencing an uninitialized pointer
which is likely a crash. The specific path caught by syzbot is via
KVM_HYPERV_EVENTD ioctl which is new in 4.17. But I guess there are
other user-triggerable paths, so cc:stable is probably justified.
Matthew added:
We have around 250 calls to idr_remove() in the kernel today. Many of
them pass an ID which is embedded in the object they're removing, so
they're safe. Picking a few likely candidates:
drivers/firewire/core-cdev.c looks unsafe; the ID comes from an ioctl.
drivers/gpu/drm/amd/amdgpu/amdgpu_ctx.c is similar
drivers/atm/nicstar.c could be taken down by a handcrafted packet
Link: http://lkml.kernel.org/r/20180518175025.GD6361@bombadil.infradead.org
Fixes: 0a835c4f09 ("Reimplement IDR and IDA using the radix tree")
Reported-by: <syzbot+35666cba7f0a337e2e79@syzkaller.appspotmail.com>
Debugged-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Borkmann says:
====================
pull-request: bpf 2018-05-24
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a bug in the original fix to prevent out of bounds speculation when
multiple tail call maps from different branches or calls end up at the
same tail call helper invocation, from Daniel.
2) Two selftest fixes, one in reuseport_bpf_numa where test is skipped in
case of missing numa support and another one to update kernel config to
properly support xdp_meta.sh test, from Anders.
...
Would be great if you have a chance to merge net into net-next after that.
The verifier fix would be needed later as a dependency in bpf-next for
upcomig work there. When you do the merge there's a trivial conflict on
BPF side with 849fa50662 ("bpf/verifier: refine retval R0 state for
bpf_get_stack helper"): Resolution is to keep both functions, the
do_refine_retval_range() and record_func_map().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
PMTU tests in pmtu.sh need support for VTI, VTI6 and dummy
interfaces: add them to config file.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: d1f1b9cbf3 ("selftests: net: Introduce first PMTU test")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test for "tc action mirred egress mirror" that mirrors to GRE when the
underlay route points at an 802.1d bridge and packet egresses through a
VLAN device.
Besides testing basic connectivity, this also tests that the traffic is
properly tagged.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test for "tc action mirred egress mirror" that mirrors to a gretap
netdevice whose underlay route points at a vlan device.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test for "tc action mirred egress mirror" that mirrors to GRE when the
underlay route points at a vlan device on top of a bridge device with
vlan filtering (802.1q).
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test for "tc action mirred egress mirror" that mirrors to a vlan device.
- test_vlan() tests that the packets get mirrored
- test_tagged_vlan() tests that the mirrored packets have correct inner
VLAN tag.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A mirror-to-vlan test that's coming next needs to install the trap
unconditionally. Therefore extract from slow_path_trap_{,un}install()
a more generic functions trap_install() and trap_uninstall(), and covert
the former two to conditional wrappers around these.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add full_test_span_gre_dir_vlan_ips() and full_test_span_gre_dir_vlan()
to support mirror-to-gre tests that involve VLAN.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add vlan_create() and vlan_destroy() to manage VLAN netdevices.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Having a clsact qdisc on $h3 is useful in several tests, and will be
useful in more tests to come. Move the registration from all the tests
that need it into the topology file itself.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For non-GRE mirroring tests, a functions along the lines of
do_test_span_gre_dir_ips() and test_span_gre_dir_ips() are necessary,
but such that they don't assume tunnels are involved. Extract the code
from mirror_gre_lib.sh to mirror_lib.sh and convert to just use a given
device without assuming it's named "h3-$tundev". Convert the two
above-mentioned functions to wrappers that pass along the correct device
name.
Add test_span_dir() and fail_test_span_dir() to round up the API for use
by following patches.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move generic parts of mirror_gre_topo_lib.sh into a new file
mirror_topo_lib.sh. Reuse the functions in GRE topo, adding the tunnel
devices as necessary.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2018-05-24
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Björn Töpel cleans up AF_XDP (removes rebind, explicit cache alignment from uapi, etc).
2) David Ahern adds mtu checks to bpf_ipv{4,6}_fib_lookup() helpers.
3) Jesper Dangaard Brouer adds bulking support to ndo_xdp_xmit.
4) Jiong Wang adds support for indirect and arithmetic shifts to NFP
5) Martin KaFai Lau cleans up BTF uapi and makes the btf_header extensible.
6) Mathieu Xhonneux adds an End.BPF action to seg6local with BPF helpers allowing
to edit/grow/shrink a SRH and apply on a packet generic SRv6 actions.
7) Sandipan Das adds support for bpf2bpf function calls in ppc64 JIT.
8) Yonghong Song adds BPF_TASK_FD_QUERY command for introspection of tracing events.
9) other misc fixes from Gustavo A. R. Silva, Sirio Balmelli, John Fastabend, and Magnus Karlsson
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that when flower-based mirror action is removed, mirroring stops.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When underlay route is removed, the mirrored traffic should not be
forwarded.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tests that the mirroring code catches up with deletion of a mirrored-to
device.
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The new tests are added to query perf_event information
for raw_tracepoint and tracepoint attachment. For tracepoint,
both syscalls and non-syscalls tracepoints are queries as
they are treated slightly differently inside the kernel.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Given a kernel function name, ksym_get_addr() will return the kernel
address for this function, or 0 if it cannot find this function name
in /proc/kallsyms. This function will be used later when a kernel
address is used to initiate a kprobe perf event.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Sync kernel header bpf.h to tools/include/uapi/linux/bpf.h and
implement bpf_task_fd_query() in libbpf. The test programs
in samples/bpf and tools/testing/selftests/bpf, and later bpftool
will use this libbpf function to query kernel.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This test the ptrace hw breakpoints via PTRACE_SET_DEBUGREG and
PPC_PTRACE_SETHWDEBUG. This test was use to find the bugs fixed by
these recent commits:
4f7c06e26e powerpc/ptrace: Fix setting 512B aligned breakpoints with PTRACE_SET_DEBUGREG
cd6ef7eebf powerpc/ptrace: Fix enforcement of DAWR constraints
Signed-off-by: Michael Neuling <mikey@neuling.org>
[mpe: Add SPDX tag, clang format it]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Add a new test for the seg6local End.BPF action. The following helpers
are also tested:
- bpf_lwt_push_encap within the LWT BPF IN hook
- bpf_lwt_seg6_action
- bpf_lwt_seg6_adjust_srh
- bpf_lwt_seg6_store_bytes
A chain of End.BPF actions is built. The SRH is injected through a LWT
BPF IN hook before entering this chain. Each End.BPF action validates
the previous one, otherwise the packet is dropped. The test succeeds
if the last node in the chain receives the packet and the UDP datagram
contained can be retrieved from userspace.
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds the End.BPF action to the LWT seg6local infrastructure.
This action works like any other seg6local End action, meaning that an IPv6
header with SRH is needed, whose DA has to be equal to the SID of the
action. It will also advance the SRH to the next segment, the BPF program
does not have to take care of this.
Since the BPF program may not be a source of instability in the kernel, it
is important to ensure that the integrity of the packet is maintained
before yielding it back to the IPv6 layer. The hook hence keeps track if
the SRH has been altered through the helpers, and re-validates its
content if needed with seg6_validate_srh. The state kept for validation is
stored in a per-CPU buffer. The BPF program is not allowed to directly
write into the packet, and only some fields of the SRH can be altered
through the helper bpf_lwt_seg6_store_bytes.
Performances profiling has shown that the SRH re-validation does not induce
a significant overhead. If the altered SRH is deemed as invalid, the packet
is dropped.
This validation is also done before executing any action through
bpf_lwt_seg6_action, and will not be performed again if the SRH is not
modified after calling the action.
The BPF program may return 3 types of return codes:
- BPF_OK: the End.BPF action will look up the next destination through
seg6_lookup_nexthop.
- BPF_REDIRECT: if an action has been executed through the
bpf_lwt_seg6_action helper, the BPF program should return this
value, as the skb's destination is already set and the default
lookup should not be performed.
- BPF_DROP : the packet will be dropped.
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Acked-by: David Lebrun <dlebrun@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Syncing the bpf.h uapi header with tools so that struct
bpf_prog_info has the two new fields for passing on the
JITed image lengths of each function in a multi-function
program.
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, we resolve the callee's address for a JITed function
call by using the imm field of the call instruction as an offset
from __bpf_call_base. If bpf_jit_kallsyms is enabled, we further
use this address to get the callee's kernel symbol's name.
For some architectures, such as powerpc64, the imm field is not
large enough to hold this offset. So, instead of assigning this
offset to the imm field, the verifier now assigns the subprog
id. Also, a list of kernel symbol addresses for all the JITed
functions is provided in the program info. We now use the imm
field as an index for this list to lookup a callee's symbol's
address and resolve its name.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Syncing the bpf.h uapi header with tools so that struct
bpf_prog_info has the two new fields for passing on the
addresses of the kernel symbols corresponding to each
function in a program.
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds a first set of tests for fib rule match/action for
ipv4 and ipv6. Initial tests only cover action lookup table.
can be extended to cover other actions in the future.
Uses ip route get to validate the rule lookup.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On arm32, 'cd tools/testing/selftests/bpf && make' fails with:
libbpf.c:80:10: error: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘int64_t {aka long long int}’ [-Werror=format=]
(func)("libbpf: " fmt, ##__VA_ARGS__); \
^
libbpf.c:83:30: note: in expansion of macro ‘__pr’
#define pr_warning(fmt, ...) __pr(__pr_warning, fmt, ##__VA_ARGS__)
^~~~
libbpf.c:1072:3: note: in expansion of macro ‘pr_warning’
pr_warning("map:%s value_type:%s has BTF type_size:%ld != value_size:%u\n",
To fix, typecast 'key_size' and amend format string.
Signed-off-by: Sirio Balmelli <sirio@b-ad.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
x86 PTI entry trampolines all map to the same physical page. If that is
reflected in the program headers of /proc/kcore, then do the same for the
copy of kcore.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-18-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Identify and copy any sections for x86 PTI entry trampolines.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-17-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation to add more program headers, get rid of kernel_map and
modules_map by moving ->kernel_map and ->modules_map to newly allocated
entries in the ->phdrs list.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-16-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation to add more program headers, iterate phdrs instead of
assuming there is only one for the kernel text and one for the modules.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-15-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation to add more program headers, layout the relative offset
of each section.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-14-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation to add more program headers, calculate offset from the
number of phdrs.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-13-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation to add more program headers, keep a count of phdrs.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-12-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, kcore_copy makes 2 program headers, one for the kernel text
(namely kernel_map) and one for the modules (namely modules_map). Now
more program headers are needed, but treating each program header as a
special case results in much more code.
Instead, in preparation to add more program headers, change to keep
program header data (phdr_data) in a list.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-11-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we enable the group, for tui/stdio2, the output first line includes
the group event string. While for stdio, it will show only one event.
For example,
perf record -e cycles,branches ./div
perf annotate --group --stdio
Percent | Source code & Disassembly of div for cycles (44407 samples)
......
The first line doesn't include the event 'branches'.
With this patch, it will show the correct group even string.
perf annotate --group --stdio
Percent | Source code & Disassembly of div for cycles, branches (44407 samples)
......
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1526989115-14435-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Like the kernel text, the location of x86 PTI entry trampolines must be
recorded in the perf.data file. Like the kernel, synthesize a mmap event
for that, and add processing for it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-10-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Create maps for x86 PTI entry trampolines, based on symbols found in
kallsyms. It is also necessary to keep track of whether the trampolines
have been mapped particularly when the kernel dso is kcore.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-9-git-send-email-adrian.hunter@intel.com
[ Fix extra_kernel_map_info.cnt designed struct initializer on gcc 4.4.7 (centos:6, etc) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Selftests fail to build on several distros/architectures because of
missing headers files.
On a Ubuntu/x86_64 some missing headers are:
asm/byteorder.h, asm/socket.h, asm/sockios.h
On a Debian/arm32 build already fails at sys/cdefs.h
In both cases, these already exist in /usr/include/<arch-specific-dir>,
but Clang does not include these when using '-target bpf' flag,
since it is no longer compiling against the host architecture.
The solution is to:
- run Clang without '-target bpf' and extract the include chain for the
current system
- add these to the bpf build with '-idirafter'
The choice of -idirafter is to catch this error without injecting
unexpected include behavior: if an arch-specific tree is built
for bpf in the future, this will be correctly found by Clang.
Signed-off-by: Sirio Balmelli <sirio@b-ad.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The reuseport_bpf_numa test case fails there's no numa support. The
test shouldn't fail if there's no support it should be skipped.
Fixes: 3c2c3c16aa ("reuseport, bpf: add test case for bpf_get_numa_node_id")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch does the followings:
1. Modify libbpf and test_btf to reflect the uapi changes in btf
2. Add test for the btf_header changes
3. Add tests for array->index_type
4. Add err_str check to the tests
5. Fix a 4 bytes hole in "struct test #1" by swapping "m" and "n"
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch sync the uapi bpf.h and btf.h to tools.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Given the fact that the ACPI "EINJ" (error injection) facility is not
universally available, implement software infrastructure to validate the
memcpy_mcsafe() exception handling implementation.
For each potential read exception point in memcpy_mcsafe(), inject a
emulated exception point at the address identified by 'mcsafe_inject'
variable. With this infrastructure implement a test to validate that the
'bytes remaining' calculation is correct for a range of various source
buffer alignments.
This code is compiled out by default. The CONFIG_MCSAFE_DEBUG
configuration symbol needs to be manually enabled by editing
Kconfig.debug. I.e. this functionality can not be accidentally enabled
by a user / distro, it's only for development.
Cc: <x86@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add IPv4 route tests covering add, append and replace permutations.
Assumes the ability to add a basic single path route works; this is
required for example when adding an address to an interface.
$ fib_tests.sh -t ipv4_rt
IPv4 route add / append tests
TEST: Attempt to add duplicate route - gw [ OK ]
TEST: Attempt to add duplicate route - dev only [ OK ]
TEST: Attempt to add duplicate route - reject route [ OK ]
TEST: Add new nexthop for existing prefix [ OK ]
TEST: Append nexthop to existing route - gw [ OK ]
TEST: Append nexthop to existing route - dev only [ OK ]
TEST: Append nexthop to existing route - reject route [ OK ]
TEST: Append nexthop to existing reject route - gw [ OK ]
TEST: Append nexthop to existing reject route - dev only [ OK ]
TEST: add multipath route [ OK ]
TEST: Attempt to add duplicate multipath route [ OK ]
TEST: Route add with different metrics [ OK ]
TEST: Route delete with metric [ OK ]
IPv4 route replace tests
TEST: Single path with single path [ OK ]
TEST: Single path with multipath [ OK ]
TEST: Single path with reject route [ OK ]
TEST: Single path with single path via multipath attribute [ OK ]
TEST: Invalid nexthop [ OK ]
TEST: Single path - replace of non-existent route [ OK ]
TEST: Multipath with multipath [ OK ]
TEST: Multipath with single path [ OK ]
TEST: Multipath with single path via multipath attribute [ OK ]
TEST: Multipath with reject route [ OK ]
TEST: Multipath - invalid first nexthop [ OK ]
TEST: Multipath - invalid second nexthop [ OK ]
TEST: Multipath - replace of non-existent route [ OK ]
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add IPv6 route tests covering add, append and replace permutations.
Assumes the ability to add a basic single path route works; this is
required for example when adding an address to an interface.
$ fib_tests.sh -t ipv6_rt
IPv6 route add / append tests
TEST: Attempt to add duplicate route - gw [ OK ]
TEST: Attempt to add duplicate route - dev only [ OK ]
TEST: Attempt to add duplicate route - reject route [ OK ]
TEST: Add new route for existing prefix (w/o NLM_F_EXCL) [ OK ]
TEST: Append nexthop to existing route - gw [ OK ]
TEST: Append nexthop to existing route - dev only [ OK ]
TEST: Append nexthop to existing route - reject route [ OK ]
TEST: Append nexthop to existing reject route - gw [ OK ]
TEST: Append nexthop to existing reject route - dev only [ OK ]
TEST: Add multipath route [ OK ]
TEST: Attempt to add duplicate multipath route [ OK ]
TEST: Route add with different metrics [ OK ]
TEST: Route delete with metric [ OK ]
IPv6 route replace tests
TEST: Single path with single path [ OK ]
TEST: Single path with multipath [ OK ]
TEST: Single path with reject route [ OK ]
TEST: Single path with single path via multipath attribute [ OK ]
TEST: Invalid nexthop [ OK ]
TEST: Single path - replace of non-existent route [ OK ]
TEST: Multipath with multipath [ OK ]
TEST: Multipath with single path [ OK ]
TEST: Multipath with single path via multipath attribute [ OK ]
TEST: Multipath with reject route [ OK ]
TEST: Multipath - invalid first nexthop [ OK ]
TEST: Multipath - invalid second nexthop [ OK ]
TEST: Multipath - replace of non-existent route [ OK ]
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add option to pause after each test before cleanup is done. Allows
user to do manual inspection or more ad-hoc testing after each test
with the setup in tact.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add command line options for controlling pause on fail, controlling
specific tests to run and verbose mode rather than relying on environment
variables.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As more tests are added, it is convenient to have a tally at the end.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Identify extra kernel maps by name so that they can be distinguished
from the kernel map and module maps.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When kernel symbols are derived from /proc/kallsyms only (not using
vmlinux or /proc/kcore) map_groups__split_kallsyms() is used. However
that function makes assumptions that are not true with entry trampoline
symbols. For now, remove the entry trampoline symbols at that point, as
they are no longer needed at that point.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On x86_64 the PTI entry trampolines are not in the kernel map created by
perf tools. That results in the addresses having no symbols and prevents
annotation. It also causes Intel PT to have decoding errors at the
trampoline addresses.
Workaround that by creating maps for the trampolines.
At present the kernel does not export information revealing where the
trampolines are. Until that happens, the addresses are hardcoded.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a function to return the number of the machine's available CPUs.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526986485-6562-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
S390 bpf_jit.S is removed in net-next and had changes in 'net',
since that code isn't used any more take the removal.
TLS data structures split the TX and RX components in 'net-next',
put the new struct members from the bug fix in 'net' into the RX
part.
The 'net-next' tree had some reworking of how the ERSPAN code works in
the GRE tunneling code, overlapping with a one-line headroom
calculation fix in 'net'.
Overlapping changes in __sock_map_ctx_update_elem(), keep the bits
that read the prog members via READ_ONCE() into local variables
before using them.
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge speculative store buffer bypass fixes from Thomas Gleixner:
- rework of the SPEC_CTRL MSR management to accomodate the new fancy
SSBD (Speculative Store Bypass Disable) bit handling.
- the CPU bug and sysfs infrastructure for the exciting new Speculative
Store Bypass 'feature'.
- support for disabling SSB via LS_CFG MSR on AMD CPUs including
Hyperthread synchronization on ZEN.
- PRCTL support for dynamic runtime control of SSB
- SECCOMP integration to automatically disable SSB for sandboxed
processes with a filter flag for opt-out.
- KVM integration to allow guests fiddling with SSBD including the new
software MSR VIRT_SPEC_CTRL to handle the LS_CFG based oddities on
AMD.
- BPF protection against SSB
.. this is just the core and x86 side, other architecture support will
come separately.
* 'speck-v20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
bpf: Prevent memory disambiguation attack
x86/bugs: Rename SSBD_NO to SSB_NO
KVM: SVM: Implement VIRT_SPEC_CTRL support for SSBD
x86/speculation, KVM: Implement support for VIRT_SPEC_CTRL/LS_CFG
x86/bugs: Rework spec_ctrl base and mask logic
x86/bugs: Remove x86_spec_ctrl_set()
x86/bugs: Expose x86_spec_ctrl_base directly
x86/bugs: Unify x86_spec_ctrl_{set_guest,restore_host}
x86/speculation: Rework speculative_store_bypass_update()
x86/speculation: Add virtualized speculative store bypass disable support
x86/bugs, KVM: Extend speculation control for VIRT_SPEC_CTRL
x86/speculation: Handle HT correctly on AMD
x86/cpufeatures: Add FEATURE_ZEN
x86/cpufeatures: Disentangle SSBD enumeration
x86/cpufeatures: Disentangle MSR_SPEC_CTRL enumeration from IBRS
x86/speculation: Use synthetic bits for IBRS/IBPB/STIBP
KVM: SVM: Move spec control call after restore of GS
x86/cpu: Make alternative_msr_write work for 32-bit code
x86/bugs: Fix the parameters alignment and missing void
x86/bugs: Make cpu_show_common() static
...
Since we created a new function perf_evlist__force_leader(), remove the
old code and use that new evlist method.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1526914666-31839-3-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For non-explicit group (e.g. those created with -e '{eventA,eventB}'),
'perf report' supports a option '--group' which can enable group output.
We also need to support 'perf annotate' with the same '--group'.
Create a new function perf_evlist__force_leader() which contains common
code to force setting the group leader.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1526914666-31839-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull networking fixes from David Miller:
1) Fix refcounting bug for connections in on-packet scheduling mode of
IPVS, from Julian Anastasov.
2) Set network header properly in AF_PACKET's packet_snd, from Willem
de Bruijn.
3) Fix regressions in 3c59x by converting to generic DMA API. It was
relying upon the hack that the PCI DMA interfaces would accept NULL
for EISA devices. From Christoph Hellwig.
4) Remove RDMA devices before unregistering netdev in QEDE driver, from
Michal Kalderon.
5) Use after free in TUN driver ptr_ring usage, from Jason Wang.
6) Properly check for missing netlink attributes in SMC_PNETID
requests, from Eric Biggers.
7) Set DMA mask before performaing any DMA operations in vmxnet3
driver, from Regis Duchesne.
8) Fix mlx5 build with SMP=n, from Saeed Mahameed.
9) Classifier fixes in bcm_sf2 driver from Florian Fainelli.
10) Tuntap use after free during release, from Jason Wang.
11) Don't use stack memory in scatterlists in tls code, from Matt
Mullins.
12) Not fully initialized flow key object in ipv4 routing code, from
David Ahern.
13) Various packet headroom bug fixes in ip6_gre driver, from Petr
Machata.
14) Remove queues from XPS maps using correct index, from Amritha
Nambiar.
15) Fix use after free in sock_diag, from Eric Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (64 commits)
net: ip6_gre: fix tunnel metadata device sharing.
cxgb4: fix offset in collecting TX rate limit info
net: sched: red: avoid hashing NULL child
sock_diag: fix use-after-free read in __sk_free
sh_eth: Change platform check to CONFIG_ARCH_RENESAS
net: dsa: Do not register devlink for unused ports
net: Fix a bug in removing queues from XPS map
bpf: fix truncated jump targets on heavy expansions
bpf: parse and verdict prog attach may race with bpf map update
bpf: sockmap update rollback on error can incorrectly dec prog refcnt
net: test tailroom before appending to linear skb
net: ip6_gre: Fix ip6erspan hlen calculation
net: ip6_gre: Split up ip6gre_changelink()
net: ip6_gre: Split up ip6gre_newlink()
net: ip6_gre: Split up ip6gre_tnl_change()
net: ip6_gre: Split up ip6gre_tnl_link_config()
net: ip6_gre: Fix headroom request in ip6erspan_tunnel_xmit()
net: ip6_gre: Request headroom in __gre6_xmit()
selftests/bpf: check return value of fopen in test_verifier.c
erspan: fix invalid erspan version.
...
Paste on POWER9 only works on accelerators and no longer on real
memory. Hence this test is broken so remove it.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull x86 fixes from Thomas Gleixner:
"An unfortunately larger set of fixes, but a large portion is
selftests:
- Fix the missing clusterid initializaiton for x2apic cluster
management which caused boot failures due to IPIs being sent to the
wrong cluster
- Drop TX_COMPAT when a 64bit executable is exec()'ed from a compat
task
- Wrap access to __supported_pte_mask in __startup_64() where clang
compile fails due to a non PC relative access being generated.
- Two fixes for 5 level paging fallout in the decompressor:
- Handle GOT correctly for paging_prepare() and
cleanup_trampoline()
- Fix the page table handling in cleanup_trampoline() to avoid
page table corruption.
- Stop special casing protection key 0 as this is inconsistent with
the manpage and also inconsistent with the allocation map handling.
- Override the protection key wen moving away from PROT_EXEC to
prevent inaccessible memory.
- Fix and update the protection key selftests to address breakage and
to cover the above issue
- Add a MOV SS self test"
[ Part of the x86 fixes were in the earlier core pull due to dependencies ]
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/mm: Drop TS_COMPAT on 64-bit exec() syscall
x86/apic/x2apic: Initialize cluster ID properly
x86/boot/compressed/64: Fix moving page table out of trampoline memory
x86/boot/compressed/64: Set up GOT for paging_prepare() and cleanup_trampoline()
x86/pkeys: Do not special case protection key 0
x86/pkeys/selftests: Add a test for pkey 0
x86/pkeys/selftests: Save off 'prot' for allocations
x86/pkeys/selftests: Fix pointer math
x86/pkeys: Override pkey when moving away from PROT_EXEC
x86/pkeys/selftests: Fix pkey exhaustion test off-by-one
x86/pkeys/selftests: Add PROT_EXEC test
x86/pkeys/selftests: Factor out "instruction page"
x86/pkeys/selftests: Allow faults on unknown keys
x86/pkeys/selftests: Avoid printf-in-signal deadlocks
x86/pkeys/selftests: Remove dead debugging code, fix dprint_in_signal
x86/pkeys/selftests: Stop using assert()
x86/pkeys/selftests: Give better unexpected fault error messages
x86/selftests: Add mov_to_ss test
x86/mpx/selftests: Adjust the self-test to fresh distros that export the MPX ABI
x86/pkeys/selftests: Adjust the self-test to fresh distros that export the pkeys ABI
...
Pull perf tooling fixes from Thomas Gleixner:
- fix segfault when processing unknown threads in cs-etm
- fix "perf test inet_pton" on s390 failing due to missing inline
- display all available events on 'perf annotate --stdio'
- add missing newline when parsing an empty BPF program
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Add missing newline when parsing empty BPF proggie
perf cs-etm: Remove redundant space
perf cs-etm: Support unknown_thread in cs_etm_auxtrace
perf annotate: Display all available events on --stdio
perf test: "probe libc's inet_pton" fails on s390 due to missing inline
Pull core fixes from Thomas Gleixner:
- Unbreak the BPF compilation which got broken by the unconditional
requirement of asm-goto, which is not supported by clang.
- Prevent probing on exception masking instructions in uprobes and
kprobes to avoid the issues of the delayed exceptions instead of
having an ugly workaround.
- Prevent a double free_page() in the error path of do_kexec_load()
- A set of objtool updates addressing various issues mostly related to
switch tables and the noreturn detection for recursive sibling calls
- Header sync for tools.
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Detect RIP-relative switch table references, part 2
objtool: Detect RIP-relative switch table references
objtool: Support GCC 8 switch tables
objtool: Support GCC 8's cold subfunctions
objtool: Fix "noreturn" detection for recursive sibling calls
objtool, kprobes/x86: Sync the latest <asm/insn.h> header with tools/objtool/arch/x86/include/asm/insn.h
x86/cpufeature: Guard asm_volatile_goto usage for BPF compilation
uprobes/x86: Prohibit probing on MOV SS instruction
kprobes/x86: Prohibit probing on exception masking instructions
x86/kexec: Avoid double free_page() upon do_kexec_load() failure
Sometimes it's useful to stream samples forever, such as when
stress-testing a driver overnight to check for memory leaks or other
issues. When the program receives a signal, it will gracefully cleanup,
so it is still safe to terminate at any time.
Add support for specifying a negative -c option, meaning that we should
loop forever. To do so, we need to use a long long (instead of just
long) for num_loops so that current code specifying num_loops greater
than UNSIGNED_LONG_MAX doesn't break.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Several types are mismatched and causing implicit conversions. Fix them
up so the types match.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Opickn x86_64, PTI entry trampolines are less than the start of kernel text,
but still above 2^63. So leave kernel_start = 1ULL << 63 for x86_64.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526548928-20790-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a function to identify the machine architecture.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1526548928-20790-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With the following commit:
fd35c88b74 ("objtool: Support GCC 8 switch tables")
I added a "can't find switch jump table" warning, to stop covering up
silent failures if add_switch_table() can't find anything.
That warning found yet another bug in the objtool switch table detection
logic. For cases 1 and 2 (as described in the comments of
find_switch_table()), the find_symbol_containing() check doesn't adjust
the offset for RIP-relative switch jumps.
Incidentally, this bug was already fixed for case 3 with:
6f5ec2993b ("objtool: Detect RIP-relative switch table references")
However, that commit missed the fix for cases 1 and 2.
The different cases are now starting to look more and more alike. So
fix the bug by consolidating them into a single case, by checking the
original dynamic jump instruction in the case 3 loop.
This also simplifies the code and makes it more robust against future
switch table detection issues -- of which I'm sure there will be many...
Switch table detection has been the most fragile area of objtool, by
far. I long for the day when we'll have a GCC plugin for annotating
switch tables. Linus asked me to delay such a plugin due to the
flakiness of the plugin infrastructure in older versions of GCC, so this
rickety code is what we're stuck with for now. At least the code is now
a little simpler than it was.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/f400541613d45689086329432f3095119ffbc328.1526674218.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add a test which shows a race in the multi-order iteration code. This
test reliably hits the race in under a second on my machine, and is the
result of a real bug report against kernel a production v4.15 based
kernel (4.15.6-300.fc27.x86_64). With a real kernel this issue is hit
when using order 9 PMD DAX radix tree entries.
The race has to do with how we tear down multi-order sibling entries
when we are removing an item from the tree. Remember that an order 2
entry looks like this:
struct radix_tree_node.slots[] = [entry][sibling][sibling][sibling]
where 'entry' is in some slot in the struct radix_tree_node, and the
three slots following 'entry' contain sibling pointers which point back
to 'entry.'
When we delete 'entry' from the tree, we call :
radix_tree_delete()
radix_tree_delete_item()
__radix_tree_delete()
replace_slot()
replace_slot() first removes the siblings in order from the first to the
last, then at then replaces 'entry' with NULL. This means that for a
brief period of time we end up with one or more of the siblings removed,
so:
struct radix_tree_node.slots[] = [entry][NULL][sibling][sibling]
This causes an issue if you have a reader iterating over the slots in
the tree via radix_tree_for_each_slot() while only under
rcu_read_lock()/rcu_read_unlock() protection. This is a common case in
mm/filemap.c.
The issue is that when __radix_tree_next_slot() => skip_siblings() tries
to skip over the sibling entries in the slots, it currently does so with
an exact match on the slot directly preceding our current slot.
Normally this works:
V preceding slot
struct radix_tree_node.slots[] = [entry][sibling][sibling][sibling]
^ current slot
This lets you find the first sibling, and you skip them all in order.
But in the case where one of the siblings is NULL, that slot is skipped
and then our sibling detection is interrupted:
V preceding slot
struct radix_tree_node.slots[] = [entry][NULL][sibling][sibling]
^ current slot
This means that the sibling pointers aren't recognized since they point
all the way back to 'entry', so we think that they are normal internal
radix tree pointers. This causes us to think we need to walk down to a
struct radix_tree_node starting at the address of 'entry'.
In a real running kernel this will crash the thread with a GP fault when
you try and dereference the slots in your broken node starting at
'entry'.
In the radix tree test suite this will be caught by the address
sanitizer:
==27063==ERROR: AddressSanitizer: heap-buffer-overflow on address
0x60c0008ae400 at pc 0x00000040ce4f bp 0x7fa89b8fcad0 sp 0x7fa89b8fcac0
READ of size 8 at 0x60c0008ae400 thread T3
#0 0x40ce4e in __radix_tree_next_slot /home/rzwisler/project/linux/tools/testing/radix-tree/radix-tree.c:1660
#1 0x4022cc in radix_tree_next_slot linux/../../../../include/linux/radix-tree.h:567
#2 0x4022cc in iterator_func /home/rzwisler/project/linux/tools/testing/radix-tree/multiorder.c:655
#3 0x7fa8a088d50a in start_thread (/lib64/libpthread.so.0+0x750a)
#4 0x7fa8a03bd16e in clone (/lib64/libc.so.6+0xf516e)
Link: http://lkml.kernel.org/r/20180503192430.7582-5-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: CR, Sapthagirish <sapthagirish.cr@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently the lifetime of "struct item" entries in the radix tree are
not controlled by RCU, but are instead deleted inline as they are
removed from the tree.
In the following patches we add a test which has threads iterating over
items pulled from the tree and verifying them in an
rcu_read_lock()/rcu_read_unlock() section. This means that though an
item has been removed from the tree it could still be being worked on by
other threads until the RCU grace period expires. So, we need to
actually free the "struct item" structures at the end of the grace
period, just as we do with "struct radix_tree_node" items.
Link: http://lkml.kernel.org/r/20180503192430.7582-4-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: CR, Sapthagirish <sapthagirish.cr@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pulled from a patch from Matthew Wilcox entitled "xarray: Add definition
of struct xarray":
> From: Matthew Wilcox <mawilcox@microsoft.com>
> Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
https://patchwork.kernel.org/patch/10341249/
These defines fix this compilation error:
In file included from ./linux/radix-tree.h:6:0,
from ./linux/../../../../include/linux/idr.h:15,
from ./linux/idr.h:1,
from idr.c:4:
./linux/../../../../include/linux/idr.h: In function `idr_init_base':
./linux/../../../../include/linux/radix-tree.h:129:2: warning: implicit declaration of function `spin_lock_init'; did you mean `spinlock_t'? [-Wimplicit-function-declaration]
spin_lock_init(&(root)->xa_lock); \
^
./linux/../../../../include/linux/idr.h:126:2: note: in expansion of macro `INIT_RADIX_TREE'
INIT_RADIX_TREE(&idr->idr_rt, IDR_RT_MARKER);
^~~~~~~~~~~~~~~
by providing a spin_lock_init() wrapper for the v4.17-rc* version of the
radix tree test suite.
Link: http://lkml.kernel.org/r/20180503192430.7582-3-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: CR, Sapthagirish <sapthagirish.cr@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit c6ce3e2fe3 ("radix tree test suite: Add config option for map
shift") introduced a phony makefile target called 'mapshift' that ends
up generating the file generated/map-shift.h. This phony target was
then added as a dependency of the top level 'targets' build target,
which is what is run when you go to tools/testing/radix-tree and just
type 'make'.
Unfortunately, this phony target doesn't actually work as a dependency,
so you end up getting:
$ make
make: *** No rule to make target 'generated/map-shift.h', needed by 'main.o'. Stop.
make: *** Waiting for unfinished jobs....
Fix this by making the file generated/map-shift.h our real makefile
target, and add this a dependency of the top level build target.
Link: http://lkml.kernel.org/r/20180503192430.7582-2-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: CR, Sapthagirish <sapthagirish.cr@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add tests for BPF_PROG_TYPE_SK_MSG to test_verifier for read access
to new sk fields.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When running bpf's selftest test_xdp_meta.sh it fails:
./test_xdp_meta.sh
Error: Specified qdisc not found.
selftests: test_xdp_meta [FAILED]
Need to enable CONFIG_NET_SCH_INGRESS and CONFIG_NET_CLS_ACT to get the
test to pass.
Fixes: 22c8852624 ("bpf: improve selftests and add tests for meta pointer")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently perf has a feature to account cycles for LBRs
For example, on skylake:
perf record -b ...
perf report or perf annotate
And then browsing the annotate browser gives average cycle counts for
program blocks.
For some analysis it would be useful if we could know not only the
average cycles but also the min and max cycles.
This patch records the min and max cycles.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1526569118-14217-2-git-send-email-yao.jin@linux.intel.com
[ Switch from max/min to min/max ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since the ip shown for a symbol is now always a virtual address, it
becomes difficult to correlate this with objdump output and determine
the exact instruction address. So, we always show the offset from the
start of the symbol.
This can be verified on a powerpc64le system running Fedora 27 as
follows:
# perf probe -a sys_write
# perf record -e probe:sys_write -g ~/test
Before applying this patch:
# perf script
test 9710 [013] 95614.332431: probe:sys_write: (c0000000004025b0)
c0000000004025b0 sys_write (/lib/modules/4.17.0-rc4+/build/vmlinux)
c00000000000b9e0 system_call (/lib/modules/4.17.0-rc4+/build/vmlinux)
7fffb70d8234 __GI___libc_write (/usr/lib64/libc-2.26.so)
7fffb7052c74 _IO_file_write@@GLIBC_2.17 (/usr/lib64/libc-2.26.so)
5afc1818 [unknown] ([unknown])
7fffb7051a60 new_do_write (/usr/lib64/libc-2.26.so)
7fffb7054638 _IO_do_write@@GLIBC_2.17 (/usr/lib64/libc-2.26.so)
7fffb7054bbc _IO_file_overflow@@GLIBC_2.17 (/usr/lib64/libc-2.26.so)
7fffb7055a24 __overflow (/usr/lib64/libc-2.26.so)
7fffb7044548 _IO_puts (/usr/lib64/libc-2.26.so)
10000440 main (/home/sandipan/test)
7fffb6fe36a0 generic_start_main.isra.0 (/usr/lib64/libc-2.26.so)
7fffb6fe3898 __libc_start_main (/usr/lib64/libc-2.26.so)
0 [unknown] ([unknown])
...
After applying this patch:
# perf script
test 9710 [013] 95614.332431: probe:sys_write: (c0000000004025b0)
c0000000004025b0 sys_write+0x10 (/lib/modules/4.17.0-rc4+/build/vmlinux)
c00000000000b9e0 system_call+0x58 (/lib/modules/4.17.0-rc4+/build/vmlinux)
7fffb70d8234 __GI___libc_write+0x24 (/usr/lib64/libc-2.26.so)
7fffb7052c74 _IO_file_write@@GLIBC_2.17+0x44 (/usr/lib64/libc-2.26.so)
5afc1818 [unknown] ([unknown])
7fffb7051a60 new_do_write+0x90 (/usr/lib64/libc-2.26.so)
7fffb7054638 _IO_do_write@@GLIBC_2.17+0x38 (/usr/lib64/libc-2.26.so)
7fffb7054bbc _IO_file_overflow@@GLIBC_2.17+0x14c (/usr/lib64/libc-2.26.so)
7fffb7055a24 __overflow+0x64 (/usr/lib64/libc-2.26.so)
7fffb7044548 _IO_puts+0x218 (/usr/lib64/libc-2.26.so)
10000440 main+0x20 (/home/sandipan/test)
7fffb6fe36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so)
7fffb6fe3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so)
0 [unknown] ([unknown])
...
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180517063326.6319-2-sandipan@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reported-by: Vlad Buslov <vladbu@mellanox.com>
Reported-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 0a67487403 ("selftests/bpf: Only run tests if !bpf_disabled")
forgot to check return value of fopen.
This caused some confusion, when running test_verifier (from
tools/testing/selftests/bpf/) on an older kernel (< v4.4) as it will
simply seqfault.
This fix avoids the segfault and prints an error, but allow program to
continue. Given the sysctl was introduced in 1be7f75d16 ("bpf:
enable non-root eBPF programs"), we know that the running kernel
cannot support unpriv, thus continue with unpriv_disabled = true.
Fixes: 0a67487403 ("selftests/bpf: Only run tests if !bpf_disabled")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When perf data is recorded with the call-graph option enabled, the
callchain shown by perf script shows the binary offsets of the symbols
as the ip. This is incorrect for kernel symbols as the ip values are
always off by a fixed offset depending on the architecture. If the
offsets from the start of the symbols are printed, they are also
incorrect for both kernel and userspace symbols.
Without the call-graph option, the callchain shows the virtual addresses
of the symbols rather than their binary offsets. The offsets printed in
this case are also correct.
This fixes the inconsistency in perf script's output.
This can be verified on a powerpc64le system running Fedora 27 as
follows:
# cat /proc/kallsyms | grep sys_write
...
c0000000004025a0 T sys_write
c0000000004025a0 T __se_sys_write
...
# perf probe -a sys_write
Before applying this patch:
# perf record -e probe:sys_write -g ~/test
# perf script -F ip,sym,symoff
4125b0 sys_write+0x8000000000008010
1b9e0 system_call+0x8000000000008058
118234 __GI___libc_write+0xffff0000f52c0024
92c74 _IO_file_write@@GLIBC_2.17+0xffff0000f52c0044
5afbfd8a [unknown]
91a60 new_do_write+0xffff0000f52c0090
94638 _IO_do_write@@GLIBC_2.17+0xffff0000f52c0038
94bbc _IO_file_overflow@@GLIBC_2.17+0xffff0000f52c014c
95a24 __overflow+0xffff0000f52c0064
84548 _IO_puts+0xffff0000f52c0218
440 main+0xffffffffe0000020
236a0 generic_start_main.isra.0+0xffff0000f52c0140
23898 __libc_start_main+0xffff0000f52c00b8
0 [unknown]
...
# perf record -e probe:sys_write ~/test
# perf script -F ip,sym,symoff
c0000000004025b0 sys_write+0x10
...
After applying this patch:
# perf record -e probe:sys_write -g ~/test
# perf script -F ip,sym,symoff
c0000000004025b0 sys_write+0x10
c00000000000b9e0 system_call+0x58
7fffb70d8234 __GI___libc_write+0x24
7fffb7052c74 _IO_file_write@@GLIBC_2.17+0x44
5afc1818 [unknown]
7fffb7051a60 new_do_write+0x90
7fffb7054638 _IO_do_write@@GLIBC_2.17+0x38
7fffb7054bbc _IO_file_overflow@@GLIBC_2.17+0x14c
7fffb7055a24 __overflow+0x64
7fffb7044548 _IO_puts+0x218
10000440 main+0x20
7fffb6fe36a0 generic_start_main.isra.0+0x140
7fffb6fe3898 __libc_start_main+0xb8
0 [unknown]
...
# perf record -e probe:sys_write ~/test
# perf script -F ip,sym,symoff
c0000000004025b0 sys_write+0x10
...
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lkml.kernel.org/r/20180517063326.6319-1-sandipan@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Let tools that need to have those variables with the sysctl current
values use a function that will read them.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-1ljj3oeo5kpt2n1icfd9vowe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is not read as commonly as 'page_size', so it makes sense to read it
lazily, caching its value when it is first read.
Less files open unconditionally at startup.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-35xhrq91u94uc1djtclek1ie@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adopt it from the kernel sources, will be used soon.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-oubheiqj8edo5rzewt11cbn0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not anymore accessed outside this library, keep it private.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-wg1m07flfrg1rm06jjzie8si@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
That takes care of using the right call to get the tracing_path
directory, the one that will end up calling tracing_path_set() to figure
out where tracefs is mounted.
One more step in doing just lazy reading of system structures to reduce
the number of operations done unconditionaly at 'perf' start.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-42zzi0f274909bg9mxzl81bu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of accessing the trace_events_path variable directly, that may
not have been properly initialized wrt detecting where tracefs is
mounted.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-id7hzn1ydgkxbumeve5wapqz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When using for_each_event() we needlessly rebuild the whole path to
the tracepoint directory, reuse the dir_path instead, saving some cycles
and reducing the size of the next patch.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-54bcs15n0cp6gwcgpc4hptyc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
* x86 fixes: PCID, UMIP, locking
* Improved support for recent Windows version that have a 2048 Hz
APIC timer.
* Rename KVM_HINTS_DEDICATED CPUID bit to KVM_HINTS_REALTIME
* Better behaved selftests.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJa/bkTAAoJEL/70l94x66Dzf8IAJ1GqtXi0CNbq8MvU4QIqw0L
HLIRoe/QgkTeTUa2fwirEuu5I+/wUyPvy5sAIsn/F5eiZM7nciLm+fYzw6F2uPIm
lSCqKpVwmh8dPl1SBaqPnTcB1HPVwcCgc2SF9Ph7yZCUwFUtoeUuPj8v6Qy6y21g
jfobHFZa3MrFgi7kPxOXSrC1qxuNJL9yLB5mwCvCK/K7jj2nrGJkLLDuzgReCqvz
isOdpof3hz8whXDQG5cTtybBgE9veym4YqJY8R5ANXBKqbFlhaNF1T3xXrdPMISZ
7bsGgkhYEOqeQsPrFwzAIiFxe2DogFwkn1BcvJ1B+duXrayt5CBnDPRB6Yxg00M=
=H0d0
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- ARM/ARM64 locking fixes
- x86 fixes: PCID, UMIP, locking
- improved support for recent Windows version that have a 2048 Hz APIC
timer
- rename KVM_HINTS_DEDICATED CPUID bit to KVM_HINTS_REALTIME
- better behaved selftests
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: rename KVM_HINTS_DEDICATED to KVM_HINTS_REALTIME
KVM: arm/arm64: VGIC/ITS save/restore: protect kvm_read_guest() calls
KVM: arm/arm64: VGIC/ITS: protect kvm_read_guest() calls with SRCU lock
KVM: arm/arm64: VGIC/ITS: Promote irq_lock() in update_affinity
KVM: arm/arm64: Properly protect VGIC locks from IRQs
KVM: X86: Lower the default timer frequency limit to 200us
KVM: vmx: update sec exec controls for UMIP iff emulating UMIP
kvm: x86: Suppress CR3_PCID_INVD bit only when PCIDs are enabled
KVM: selftests: exit with 0 status code when tests cannot be run
KVM: hyperv: idr_find needs RCU protection
x86: Delay skip of emulated hypercall instruction
KVM: Extend MAX_IRQ_ROUTES to 4096 for all archs
To make reading events files a tad more compact than with
get_tracing_files("events/foo").
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-do6xgtwpmfl8zjs1euxsd2du@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow the user to override the default trace buffer memory allocation
by adding a command line option to override the default.
The patch also:
Adds a SIGINT (i.e. CTRL C exit) handler,
so that things can be cleaned up before exit.
Moves the postion of some other cleanup from after to
before the potential "No valid data to plot" exit.
Replaces all quit() calls with sys.exit, because
quit() is not supposed to be used in scripts.
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-05-17
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Provide a new BPF helper for doing a FIB and neighbor lookup
in the kernel tables from an XDP or tc BPF program. The helper
provides a fast-path for forwarding packets. The API supports
IPv4, IPv6 and MPLS protocols, but currently IPv4 and IPv6 are
implemented in this initial work, from David (Ahern).
2) Just a tiny diff but huge feature enabled for nfp driver by
extending the BPF offload beyond a pure host processing offload.
Offloaded XDP programs are allowed to set the RX queue index and
thus opening the door for defining a fully programmable RSS/n-tuple
filter replacement. Once BPF decided on a queue already, the device
data-path will skip the conventional RSS processing completely,
from Jakub.
3) The original sockmap implementation was array based similar to
devmap. However unlike devmap where an ifindex has a 1:1 mapping
into the map there are use cases with sockets that need to be
referenced using longer keys. Hence, sockhash map is added reusing
as much of the sockmap code as possible, from John.
4) Introduce BTF ID. The ID is allocatd through an IDR similar as
with BPF maps and progs. It also makes BTF accessible to user
space via BPF_BTF_GET_FD_BY_ID and adds exposure of the BTF data
through BPF_OBJ_GET_INFO_BY_FD, from Martin.
5) Enable BPF stackmap with build_id also in NMI context. Due to the
up_read() of current->mm->mmap_sem build_id cannot be parsed.
This work defers the up_read() via a per-cpu irq_work so that
at least limited support can be enabled, from Song.
6) Various BPF JIT follow-up cleanups and fixups after the LD_ABS/LD_IND
JIT conversion as well as implementation of an optimized 32/64 bit
immediate load in the arm64 JIT that allows to reduce the number of
emitted instructions; in case of tested real-world programs they
were shrinking by three percent, from Daniel.
7) Add ifindex parameter to the libbpf loader in order to enable
BPF offload support. Right now only iproute2 can load offloaded
BPF and this will also enable libbpf for direct integration into
other applications, from David (Beckett).
8) Convert the plain text documentation under Documentation/bpf/ into
RST format since this is the appropriate standard the kernel is
moving to for all documentation. Also add an overview README.rst,
from Jesper.
9) Add __printf verification attribute to the bpf_verifier_vlog()
helper. Though it uses va_list we can still allow gcc to check
the format string, from Mathieu.
10) Fix a bash reference in the BPF selftest's Makefile. The '|& ...'
is a bash 4.0+ feature which is not guaranteed to be available
when calling out to shell, therefore use a more portable variant,
from Joe.
11) Fix a 64 bit division in xdp_umem_reg() by using div_u64()
instead of relying on the gcc built-in, from Björn.
12) Fix a sock hashmap kmalloc warning reported by syzbot when an
overly large key size is used in hashmap then causing overflows
in htab->elem_size. Reject bogus attr->key_size early in the
sock_hash_alloc(), from Yonghong.
13) Ensure in BPF selftests when urandom_read is being linked that
--build-id is always enabled so that test_stacktrace_build_id[_nmi]
won't be failing, from Alexei.
14) Add bitsperlong.h as well as errno.h uapi headers into the tools
header infrastructure which point to one of the arch specific
uapi headers. This was needed in order to fix a build error on
some systems for the BPF selftests, from Sirio.
15) Allow for short options to be used in the xdp_monitor BPF sample
code. And also a bpf.h tools uapi header sync in order to fix a
selftest build failure. Both from Prashant.
16) More formally clarify the meaning of ID in the direct packet access
section of the BPF documentation, from Wang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
BPF programs currently can only be offloaded using iproute2. This
patch will allow programs to be offloaded using libbpf calls.
Signed-off-by: David Beckett <david.beckett@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds the SOCKHASH map type to bpftools so that we get correct
pretty printing.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This runs existing SOCKMAP tests with SOCKHASH map type. To do this
we push programs into include file and build two BPF programs. One
for SOCKHASH and one for SOCKMAP.
We then run the entire test suite with each type.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
One should use tracing_path_mount() instead, so more things get done
lazily instead of at every 'perf' tool call startup.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-fci4yll35idd9yuslp67vqc2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Its only used in the file it is defined, so just make it static.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-p5x29u6mq2ml3mtnbg9844ad@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We check what perf_config__init() does at each perf_config() call,
namely if the static perf_config instance was created, so instead of
bailing out in that case, try to allocate it, bailing if it fails.
Now to get the perf_config() call out of the start of perf's main()
function, doing it also lazily.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-4bo45k6ivsmbxpfpdte4orsg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Added extra test cases for different control actions (reclassify, pipe
etc.), cookies, max values & exceeding maximum, and replace existing
actions unit tests.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bpf_object__open()/bpf_object__open_buffer can return error pointer or
NULL, check the return values with IS_ERR_OR_NULL() in bpf__prepare_load
and bpf__prepare_load_buffer
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: netdev@vger.kernel.org
Link: https://lkml.kernel.org/n/tip-psf4xwc09n62al2cb9s33v9h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf stat doesn't count the uncore event aliases from the same uncore
block in a group, for example:
perf stat -e '{unc_m_cas_count.all,unc_m_clockticks}' -a -I 1000
# time counts unit events
1.000447342 <not counted> unc_m_cas_count.all
1.000447342 <not counted> unc_m_clockticks
2.000740654 <not counted> unc_m_cas_count.all
2.000740654 <not counted> unc_m_clockticks
The output is very misleading. It gives a wrong impression that the
uncore event doesn't work.
An uncore block could be composed by several PMUs. An uncore event alias
is a joint name which means the same event runs on all PMUs of a block.
Perf doesn't support mixed events from different PMUs in the same group.
It is wrong to put uncore event aliases in a big group.
The right way is to split the big group into multiple small groups which
only include the events from the same PMU.
Only uncore event aliases from the same uncore block should be specially
handled here. It doesn't make sense to mix the uncore events with other
uncore events from different blocks or even core events in a group.
With the patch:
# time counts unit events
1.001557653 140,833 unc_m_cas_count.all
1.001557653 1,330,231,332 unc_m_clockticks
2.002709483 85,007 unc_m_cas_count.all
2.002709483 1,429,494,563 unc_m_clockticks
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Agustin Vega-Frias <agustinv@codeaurora.org>
Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1525727623-19768-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Updates to the handling of expedited grace periods, perhaps most
notably parallelizing their initialization. Other changes
include fixes from Boqun Feng.
- Miscellaneous fixes. These include an nvme fix from Nitzan Carmi
that I am carrying because it depends on a new SRCU function
cleanup_srcu_struct_quiesced(). This branch also includes fixes
from Byungchul Park and Yury Norov.
- Updates to reduce lock contention in the rcu_node combining tree.
These are in preparation for the consolidation of RCU-bh,
RCU-preempt, and RCU-sched into a single flavor, which was
requested by Linus Torvalds in response to a security flaw
whose root cause included confusion between the multiple flavors
of RCU.
- Torture-test updates that save their users some time and effort.
Conflicts:
drivers/nvme/host/core.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, kvm-find-errors.sh looks only for build errors ("error:"),
so this commit makes it also locate build warnings ("warning:").
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
With the addition of the end-of-test state, it is not uncommon for the
kvm.sh summary lines to overflow 80 characters. This commit therefore
applies abbreviations in order to make the line fit into 80 characters
with high probability.
And yes, I did make heavy use of punched cards back in the day, so 80
columns it is for my xterms! ;-)
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
This commit adds the end-of-test test, if present in the console output,
to the kvm.sh test summary that is printed by kvm-recheck.sh. Note that
this only applies to rcutorture console output.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
The rcutorture scripting scans the console output twice, once to look
for various sorts of hangs and again to find warnings and panics.
Unfortunately, only the output of the second scan gets written to the
console.log.diags file, which can cause hangs to be overlooked.
This commit therefore folds the parse-torture.sh script (which looks
for hangs) into the parse-console.sh script (which looks for warnings
and panics). This allows both types of failure information to be
added to console.log.diags, while still reliably removing this file
when it proves to be empty.
This also fixes a long-standing bug where rcuperf log files would
unconditionally complain about a hang.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
This commit adds a script that allows viewing the build and/or
console output from failed rcutorture, locktorture, or rcuperf runs.
This replaces a time-honored but inefficient manual procedure that uses
cut and paste.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Nicholas Piggin <npiggin@gmail.com>
The first symbol is not necessarily in the kernel text. Instead of
using the first symbol, use the _stest symbol to identify the kernel map
when loading kcore.
This allows for the introduction of symbols to identify the x86_64 PTI
entry trampolines.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/1525866228-30321-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that kprobe definitions become:
int probe(function, variables)(void *ctx, int err, var1, var2, ...)
The existing 5sec.c, got converted and goes from:
SEC("func=hrtimer_nanosleep rqtp->tv_sec")
int func(void *ctx, int err, long sec)
{
}
To:
int probe(hrtimer_nanosleep, rqtp->tv_sec)(void *ctx, int err, long sec)
{
}
If we decide to add tv_nsec as well, then it becomes:
$ cat tools/perf/examples/bpf/5sec.c
#include <bpf.h>
int probe(hrtimer_nanosleep, rqtp->tv_sec rqtp->tv_nsec)(void *ctx, int err, long sec, long nsec)
{
return sec == 5;
}
license(GPL);
$
And if we run it, system wide as before and run some 'sleep' with values
for the tv_nsec field, we get:
# perf trace --no-syscalls -e tools/perf/examples/bpf/5sec.c
0.000 perf_bpf_probe:hrtimer_nanosleep:(ffffffff9811b5f0) tv_sec=5 tv_nsec=100000000
9641.650 perf_bpf_probe:hrtimer_nanosleep:(ffffffff9811b5f0) tv_sec=5 tv_nsec=123450001
^C#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-1v9r8f6ds5av0w9pcwpeknyl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To further reduce boilerplate.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-vst6hj335s0ebxzqltes3nsc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Description:
. Disable strace like syscall tracing (--no-syscalls), or try tracing
just some (-e *sleep).
. Attach a filter function to a kernel function, returning when it should
be considered, i.e. appear on the output:
$ cat tools/perf/examples/bpf/5sec.c
#include <bpf.h>
SEC("func=hrtimer_nanosleep rqtp->tv_sec")
int func(void *ctx, int err, long sec)
{
return sec == 5;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
$
. Run it system wide, so that any sleep of >= 5 seconds and < than 6
seconds gets caught.
. Ask for callgraphs using DWARF info, so that userspace can be unwound
. While this is running, run something like "sleep 5s".
# perf trace --no-syscalls -e tools/perf/examples/bpf/5sec.c/call-graph=dwarf/
0.000 perf_bpf_probe:func:(ffffffff9811b5f0) tv_sec=5
hrtimer_nanosleep ([kernel.kallsyms])
__x64_sys_nanosleep ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64 ([kernel.kallsyms])
__GI___nanosleep (/usr/lib64/libc-2.26.so)
rpl_nanosleep (/usr/bin/sleep)
xnanosleep (/usr/bin/sleep)
main (/usr/bin/sleep)
__libc_start_main (/usr/lib64/libc-2.26.so)
_start (/usr/bin/sleep)
^C#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-2nmxth2l2h09f9gy85lyexcq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So, the first helper is the one shortening a variable/function section
attribute, from, for instance:
char _license[] __attribute__((section("license"), used)) = "GPL";
to:
char _license[] SEC("license") = "GPL";
Convert empty.c to that and it becomes:
# cat ~acme/lib/examples/perf/bpf/empty.c
#include <bpf.h>
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-zmeg52dlvy51rdlhyumfl5yf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The first one is the bare minimum that bpf infrastructure accepts before
it expects actual events to be set up:
$ cat tools/perf/examples/bpf/empty.c
char _license[] __attribute__((section("license"), used)) = "GPL";
int _version __attribute__((section("version"), used)) = LINUX_VERSION_CODE;
$
If you remove that "version" line, then it will be refused with:
# perf trace -e tools/perf/examples/bpf/empty.c
event syntax error: 'tools/perf/examples/bpf/empty.c'
\___ Failed to load tools/perf/examples/bpf/empty.c from source: 'version' section incorrect or lost
(add -v to see detail)
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events
#
The next ones will, step by step, show simple filters, then the needs
for headers will be made clear, it will be put in place and tested with
new examples, rinse, repeat.
Back to using this first one to test the perf+bpf infrastructure:
If we run it will fail, as no functions are present connecting with,
say, a tracepoint or a function using the kprobes or uprobes
infrastructure:
# perf trace -e tools/perf/examples/bpf/empty.c
WARNING: event parser found nothing
invalid or unsupported event: 'tools/perf/examples/bpf/empty.c'
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events
#
But, if we set things up to dump the generated object file to a file,
and do this after having run 'make install', still on the developer's
$HOME directory:
# cat ~/.perfconfig
[llvm]
dump-obj = true
#
# perf trace -e ~acme/lib/examples/perf/bpf/empty.c
LLVM: dumping /home/acme/lib/examples/perf/bpf/empty.o
WARNING: event parser found nothing
invalid or unsupported event: '/home/acme/lib/examples/perf/bpf/empty.c'
<SNIP>
#
We can look at the dumped object file:
# ls -la ~acme/lib/examples/perf/bpf/empty.o
-rw-r--r--. 1 root root 576 May 4 12:10 /home/acme/lib/examples/perf/bpf/empty.o
# file ~acme/lib/examples/perf/bpf/empty.o
/home/acme/lib/examples/perf/bpf/empty.o: ELF 64-bit LSB relocatable, *unknown arch 0xf7* version 1 (SYSV), not stripped
# readelf -sw ~acme/lib/examples/perf/bpf/empty.o
Symbol table '.symtab' contains 3 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 3 _license
2: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 4 _version
#
# tools/bpf/bpftool/bpftool --pretty ~acme/lib/examples/perf/bpf/empty.o
null
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-y7dkhakejz3013o0w21n98xd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To avoid regressions such as the one fixed by 4a35a9027f ("Revert
"perf pmu: Fix pmu events parsing rule""), where '-e intel_pt//u' got
broken, with this new entry in this 'perf tests' subtest, we would have
caught it before pushing upstream.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-kw62fys9bwdgsp722so2ln1l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
--build-id may not be a default linker config.
Make sure it's used when linking urandom_read test program.
Otherwise test_stacktrace_build_id[_nmi] tests will be failling.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The paper discusses the revised ARMv8 memory model; such revision
had an important impact on the design of the LKMM.
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arch@vger.kernel.org
Cc: parri.andrea@gmail.com
Link: http://lkml.kernel.org/r/1526340837-12222-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
ASPLOS 2018 was held in March: make sure this is reflected in
header comments and references.
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arch@vger.kernel.org
Cc: parri.andrea@gmail.com
Link: http://lkml.kernel.org/r/1526340837-12222-18-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
lock.cat contains old comments and code referring to the possibility
of LKR events that are not part of an RMW pair. This is a holdover
from when I though we might end up using LKR events to implement
spin_is_locked(). Reword the comments to remove this assumption and
replace domain(lk-rmw) in the code with LKR.
Tested-by: Andrea Parri <andrea.parri@amarulasolutions.com>
[ paulmck: Pulled as lock-nest into previous line as discussed. ]
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arch@vger.kernel.org
Cc: parri.andrea@gmail.com
Link: http://lkml.kernel.org/r/1526340837-12222-15-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The code in lock.cat which checks for normal read/write accesses to
spinlock variables doesn't take into account the newly added RL and RU
events. Add them into the test, and move the resulting code up near
the start of the file, since a violation would indicate a pretty
severe conceptual error in a litmus test.
Tested-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arch@vger.kernel.org
Cc: parri.andrea@gmail.com
Link: http://lkml.kernel.org/r/1526340837-12222-14-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch improves the comments in tools/memory-model/lock.cat. In
addition to making the text more uniform and removing redundant
comments, it adds a description of all the possible locking events
that herd can generate.
Tested-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arch@vger.kernel.org
Cc: parri.andrea@gmail.com
Link: http://lkml.kernel.org/r/1526340837-12222-13-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch simplifies the implementation of spin_is_locked in the
LKMM. It capitalizes on the fact that a failed spin_trylock() and a
spin_is_locked() which returns True have exactly the same semantics
(those of READ_ONCE) and ordering properties (none). Therefore the
two kinds of events can be combined and handled by the same code,
instead of treated separately as they are currently.
Tested-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arch@vger.kernel.org
Cc: parri.andrea@gmail.com
Link: http://lkml.kernel.org/r/1526340837-12222-12-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This commit flags WRC+pooncerelease+rmbonceonce+Once.litmus
as being forbidden by smp_store_release() A-cumulativity and
IRIW+mbonceonces+OnceOnce.litmus as being forbidden by the LKMM
propagation rule.
Suggested-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
[ paulmck: Updated wording as suggested by Alan Stern. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: akiyks@gmail.com
Cc: boqun.feng@gmail.com
Cc: dhowells@redhat.com
Cc: j.alglave@ucl.ac.uk
Cc: linux-arch@vger.kernel.org
Cc: luc.maranget@inria.fr
Cc: npiggin@gmail.com
Cc: parri.andrea@gmail.com
Link: http://lkml.kernel.org/r/1526340837-12222-11-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This commit first adds a trivial macro for spin_is_locked() to
linux-kernel.def.
It also adds cat code for enumerating all possible matches of lock
write events (set LKW) with islocked events returning true (set RL,
for Read from Lock), and unlock write events (set UL) with islocked
events returning false (set RU, for Read from Unlock). Note that this
intentionally does not model uniprocessor kernels (CONFIG_SMP=n) built
with CONFIG_DEBUG_SPINLOCK=n, in which spin_is_locked() unconditionally
returns zero.
It also adds a pair of litmus tests demonstrating the minimal ordering
provided by spin_is_locked() in conjunction with spin_lock(). Will Deacon
noted that this minimal ordering happens on ARMv8:
https://lkml.kernel.org/r/20180226162426.GB17158@arm.com
Notice that herd7 installations strictly older than version 7.49
do not handle the new constructs.
Signed-off-by: Luc Maranget <luc.maranget@inria.fr>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luc Maranget <Luc.Maranget@inria.fr>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/1526340837-12222-10-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This commit adds a pair of scripts that run the memory model on litmus
tests, checking that the verification result of each litmus test matches
the result flagged in the litmus test itself. These scripts permit easier
checking of changes to the memory model against preconceived notions.
To run the scripts, go to the tools/memory-model directory and type
"scripts/checkalllitmus.sh". If all is well, the last line printed will
be "All litmus tests verified as was expected."
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: akiyks@gmail.com
Cc: boqun.feng@gmail.com
Cc: dhowells@redhat.com
Cc: j.alglave@ucl.ac.uk
Cc: linux-arch@vger.kernel.org
Cc: luc.maranget@inria.fr
Cc: npiggin@gmail.com
Cc: parri.andrea@gmail.com
Cc: stern@rowland.harvard.edu
Link: http://lkml.kernel.org/r/1526340837-12222-9-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Code generated by klitmus7 version 7.48 doesn't compile with kernel
header of 4.15 and later due to the absence of ACCESS_ONCE().
As the issue has been resolved in herdtools7 7.49, bump the required
version number in README.
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arch@vger.kernel.org
Link: http://lkml.kernel.org/r/1526340837-12222-3-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch reorganizes the definition of rb in the Linux Kernel Memory
Consistency Model. The relation is now expressed in terms of
rcu-fence, which consists of a sequence of gp and rscs links separated
by rcu-link links, in which the number of occurrences of gp is >= the
number of occurrences of rscs.
Arguments similar to those published in
http://diy.inria.fr/linux/long.pdf show that rcu-fence behaves like an
inter-CPU strong fence. Furthermore, the definition of rb in terms of
rcu-fence is highly analogous to the definition of pb in terms of
strong-fence, which can help explain why rcu-path expresses a form of
temporal ordering.
This change should not affect the semantics of the memory model, just
its internal organization.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: akiyks@gmail.com
Cc: dhowells@redhat.com
Cc: j.alglave@ucl.ac.uk
Cc: linux-arch@vger.kernel.org
Cc: luc.maranget@inria.fr
Cc: npiggin@gmail.com
Link: http://lkml.kernel.org/r/1526340837-12222-2-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch makes a simple non-functional change to the RCU portion of
the Linux Kernel Memory Consistency Model by renaming the "link" and
"rcu-path" relations to "rcu-link" and "rb", respectively.
The name "link" was an unfortunate choice, because it was too generic
and subject to confusion with other meanings of the same word, which
occur quite often in LKMM documentation. The name "rcu-path" is not
very appropriate, because the relation is analogous to the
happens-before (hb) and propagates-before (pb) relations -- although
that fact won't become apparent until the second patch in this series.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: akiyks@gmail.com
Cc: boqun.feng@gmail.com
Cc: dhowells@redhat.com
Cc: j.alglave@ucl.ac.uk
Cc: linux-arch@vger.kernel.org
Cc: luc.maranget@inria.fr
Cc: npiggin@gmail.com
Link: http://lkml.kernel.org/r/1526340837-12222-1-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Typically a switch table can be found by detecting a .rodata access
followed an indirect jump:
1969: 4a 8b 0c e5 00 00 00 mov 0x0(,%r12,8),%rcx
1970: 00
196d: R_X86_64_32S .rodata+0x438
1971: e9 00 00 00 00 jmpq 1976 <dispc_runtime_suspend+0xb6a>
1972: R_X86_64_PC32 __x86_indirect_thunk_rcx-0x4
Randy Dunlap reported a case (seen with GCC 4.8) where the .rodata
access uses RIP-relative addressing:
19bd: 48 8b 3d 00 00 00 00 mov 0x0(%rip),%rdi # 19c4 <dispc_runtime_suspend+0xbb8>
19c0: R_X86_64_PC32 .rodata+0x45c
19c4: e9 00 00 00 00 jmpq 19c9 <dispc_runtime_suspend+0xbbd>
19c5: R_X86_64_PC32 __x86_indirect_thunk_rdi-0x4
In this case the relocation addend needs to be adjusted accordingly in
order to find the location of the switch table.
The fix is for case 3 (as described in the comments), but also make the
existing case 1 & 2 checks more precise by only adjusting the addend for
R_X86_64_PC32 relocations.
This fixes the following warnings:
drivers/video/fbdev/omap2/omapfb/dss/dispc.o: warning: objtool: dispc_runtime_suspend()+0xbb8: sibling call from callable instruction with modified stack frame
drivers/video/fbdev/omap2/omapfb/dss/dispc.o: warning: objtool: dispc_runtime_resume()+0xcc5: sibling call from callable instruction with modified stack frame
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/b6098294fd67afb69af8c47c9883d7a68bf0f8ea.1526305958.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add test cases where we combine semi-random imm values, mainly for testing
JITs when they have different encoding options for 64 bit immediates in
order to reduce resulting image size.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This new test captures stackmap with build_id with hardware event
PERF_COUNT_HW_CPU_CYCLES.
Because we only support one ips-to-build_id lookup per cpu in NMI
context, stack_amap will not be able to do the lookup in this test.
Therefore, we didn't do compare_stack_ips(), as it will alwasy fail.
urandom_read.c is extended to run configurable cycles so that it can be
caught by the perf event.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The exec_target binary could segfault calling _exit(2) because r13
is not set up properly (and libc looks at that when performing a
syscall). Call SYS_exit using syscall(2) which doesn't seem to
have this problem.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Protection key 0 is the default key for all memory and will
not normally come back from pkey_alloc(). But, you might
still want pass it to mprotect_pkey().
This check ensures that you can use pkey 0.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellermen <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180509171356.9E40B254@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This makes it possible to to tell what 'prot' a given allocation
is supposed to have. That way, if we want to change just the
pkey, we know what 'prot' to pass to mprotect_pkey().
Also, keep a record of the most recent allocation so the tests
can easily find it.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellermen <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180509171354.AA23E228@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We dump out the entire area of the siginfo where the si_pkey_ptr is
supposed to be. But, we do some math on the poitner, which is a u32.
We intended to do byte math, not u32 math on the pointer.
Cast it over to a u8* so it works.
Also, move this block of code to below th si_code check. It doesn't
hurt anything, but the si_pkey field is gibberish for other signal
types.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellermen <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180509171352.9BE09819@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In our "exhaust all pkeys" test, we make sure that there
is the expected number available. Turns out that the
test did not cover the execute-only key, but discussed
it anyway. It did *not* discuss the test-allocated
key.
Now that we have a test for the mprotect(PROT_EXEC) case,
this off-by-one issue showed itself. Correct the off-by-
one and add the explanation for the case we missed.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellermen <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180509171350.E1656B95@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Under the covers, implement executable-only memory with
protection keys when userspace calls mprotect(PROT_EXEC).
But, we did not have a selftest for that. Now we do.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellermen <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180509171348.9EEE4BEF@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We currently have an execute-only test, but it is for
the explicit mprotect_pkey() interface. We will soon
add a test for the implicit mprotect(PROT_EXEC)
enterface. We need this code in both tests.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellermen <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180509171347.C64AB733@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The exec-only pkey is allocated inside the kernel and userspace
is not told what it is. So, allow PK faults to occur that have
an unknown key.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellermen <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180509171345.7FC7DA00@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
printf() and friends are unusable in signal handlers. They deadlock.
The pkey selftest does not do any normal printing in signal handlers,
only extra debugging. So, just print the format string so we get
*some* output when debugging.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellermen <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180509171344.C53FD2F3@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There is some noisy debug code at the end of the signal handler. It was
disabled by an early, unconditional "return". However, that return also
hid a dprint_in_signal=0, which kept dprint_in_signal=1 and effectively
locked us into permanent dprint_in_signal=1 behavior.
Remove the return and the dead code, fixing dprint_in_signal.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellermen <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180509171342.846B9B2E@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If we use assert(), the program "crashes". That can be scary to users,
so stop doing it. Just exit with a >0 exit code instead.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellermen <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180509171340.E63EF7DA@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
do_not_expect_pk_fault() is a helper that we call when we do not expect
a PK fault to have occurred. But, it is a function, which means that
it obscures the line numbers from pkey_assert(). It also gives no
details.
Replace it with an implementation that gives nice line numbers and
also lets callers pass in a more descriptive message about what
happened that caused the unexpected fault.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellermen <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20180509171338.55D13B64@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This exercises a nasty corner case of the x86 ISA.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/67e08b69817171da8026e0eb3af0214b06b4d74f.1525800455.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ubuntu 18.04 started exporting pkeys details in header files, resulting
in build failures and warnings in the pkeys self-tests:
protection_keys.c:232:0: warning: "SEGV_BNDERR" redefined
protection_keys.c:387:5: error: conflicting types for ‘pkey_get’
protection_keys.c:409:5: error: conflicting types for ‘pkey_set’
...
Fix these namespace conflicts and double definitions, plus also
clean up the ABI definitions to make it all a bit more readable ...
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: dave.hansen@intel.com
Cc: linux-mm@kvack.org
Cc: linuxram@us.ibm.com
Cc: mpe@ellerman.id.au
Cc: shakeelb@google.com
Cc: shuah@kernel.org
Link: http://lkml.kernel.org/r/20180514085623.GB7094@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With GCC 8, some issues were found with the objtool switch table
detection.
1) In the .rodata section, immediately after the switch table, there can
be another object which contains a pointer to the function which had
the switch statement. In this case objtool wrongly considers the
function pointer to be part of the switch table. Fix it by:
a) making sure there are no pointers to the beginning of the
function; and
b) making sure there are no gaps in the switch table.
Only the former was needed, the latter adds additional protection for
future optimizations.
2) In find_switch_table(), case 1 and case 2 are missing the check to
ensure that the .rodata switch table data is anonymous, i.e. that it
isn't already associated with an ELF symbol. Fix it by adding the
same find_symbol_containing() check which is used for case 3.
This fixes the following warnings with GCC 8:
drivers/block/virtio_blk.o: warning: objtool: virtio_queue_rq()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+72
net/ipv6/icmp.o: warning: objtool: icmpv6_rcv()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+64
drivers/usb/core/quirks.o: warning: objtool: quirks_param_set()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+48
drivers/mtd/nand/raw/nand_hynix.o: warning: objtool: hynix_nand_decode_id()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+24
drivers/mtd/nand/raw/nand_samsung.o: warning: objtool: samsung_nand_decode_id()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+32
drivers/gpu/drm/nouveau/nvkm/subdev/top/gk104.o: warning: objtool: gk104_top_oneinit()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+64
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: damian <damian.tometzki@icloud.com>
Link: http://lkml.kernel.org/r/20180510224849.xwi34d6tzheb5wgw@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
GCC 8 moves a lot of unlikely code out of line to "cold" subfunctions in
.text.unlikely. Properly detect the new subfunctions and treat them as
extensions of the original functions.
This fixes a bunch of warnings like:
kernel/cgroup/cgroup.o: warning: objtool: parse_cgroup_root_flags()+0x33: sibling call from callable instruction with modified stack frame
kernel/cgroup/cgroup.o: warning: objtool: cgroup_addrm_files()+0x290: sibling call from callable instruction with modified stack frame
kernel/cgroup/cgroup.o: warning: objtool: cgroup_apply_control_enable()+0x25b: sibling call from callable instruction with modified stack frame
kernel/cgroup/cgroup.o: warning: objtool: rebind_subsystems()+0x325: sibling call from callable instruction with modified stack frame
Reported-and-tested-by: damian <damian.tometzki@icloud.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/0965e7fcfc5f31a276f0c7f298ff770c19b68706.1525923412.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Objtool has some crude logic for detecting static "noreturn" functions
(aka "dead ends"). This is necessary for being able to correctly follow
GCC code flow when such functions are called.
It's remotely possible for two functions to call each other via sibling
calls. If they don't have RET instructions, objtool's noreturn
detection logic goes into a recursive loop:
drivers/char/ipmi/ipmi_ssif.o: warning: objtool: return_hosed_msg()+0x0: infinite recursion (objtool bug!)
drivers/char/ipmi/ipmi_ssif.o: warning: objtool: deliver_recv_msg()+0x0: infinite recursion (objtool bug!)
Instead of reporting an error in this case, consider the functions to be
non-dead-ends.
Reported-and-tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: damian <damian.tometzki@icloud.com>
Link: http://lkml.kernel.org/r/7cc156408c5781a1f62085d352ced1fe39fe2f91.1525923412.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The following commit:
ee6a7354a362: kprobes/x86: Prohibit probing on exception masking instructions
Modified <asm/insn.h>, adding the insn_masking_exception() function.
Sync the tooling version of the header to it, to fix this warning:
Warning: synced file at 'tools/objtool/arch/x86/include/asm/insn.h' differs from latest kernel version at 'arch/x86/include/asm/insn.h'
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Cc: Francis Deslauriers <francis.deslauriers@efficios.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "David S . Miller" <davem@davemloft.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2018-05-14
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix nfp to allow zero-length BPF capabilities, meaning the nfp
capability parsing loop will otherwise exit early if the last
capability is zero length and therefore driver will fail to probe
with an error such as:
nfp: BPF capabilities left after parsing, parsed:92 total length:100
nfp: invalid BPF capabilities at offset:92
Fix from Jakub.
2) libbpf's bpf_object__open() may return IS_ERR_OR_NULL() and not
just an error. Fix libbpf's bpf_prog_load_xattr() to handle that
case as well, also from Jakub.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull perf tooling fixes from Thomas Gleixner:
"Another small set of perf tooling fixes and updates:
- Revert "perf pmu: Fix pmu events parsing rule", as it broke Intel
PT event description parsing (Arnaldo Carvalho de Melo)
- Sync x86's cpufeatures.h and kvm UAPI headers with the kernel
sources, suppressing the ABI drift warnings (Arnaldo Carvalho de
Melo)
- Remove duplicated entry for westmereep-dp in Intel's mapfile.csv
(William Cohen)
- Fix typo in 'perf bench numa' options description (Yisheng Xie)"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "perf pmu: Fix pmu events parsing rule"
tools headers kvm: Sync ARM UAPI headers with the kernel sources
tools headers kvm: Sync uapi/linux/kvm.h with the kernel sources
tools headers: Sync x86 cpufeatures.h with the kernel sources
perf vendor events intel: Remove duplicated entry for westmereep-dp in mapfile.csv
perf bench numa: Fix typo in options
The bpf syscall and selftests conflicts were trivial
overlapping changes.
The r8169 change involved moving the added mdelay from 'net' into a
different function.
A TLS close bug fix overlapped with the splitting of the TLS state
into separate TX and RX parts. I just expanded the tests in the bug
fix from "ctx->conf == X" into "ctx->tx_conf == X && ctx->rx_conf
== X".
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Verify lengths of keys provided by the user is AF_KEY, from Kevin
Easton.
2) Add device ID for BCM89610 PHY. Thanks to Bhadram Varka.
3) Add Spectre guards to some ATM code, courtesy of Gustavo A. R.
Silva.
4) Fix infinite loop in NSH protocol code. To Eric Dumazet we are most
grateful for this fix.
5) Line up /proc/net/netlink headers properly. This fix from YU Bo, we
do appreciate.
6) Use after free in TLS code. Once again we are blessed by the
honorable Eric Dumazet with this fix.
7) Fix regression in TLS code causing stalls on partial TLS records.
This fix is bestowed upon us by Andrew Tomt.
8) Deal with too small MTUs properly in LLC code, another great gift
from Eric Dumazet.
9) Handle cached route flushing properly wrt. MTU locking in ipv4, to
Hangbin Liu we give thanks for this.
10) Fix regression in SO_BINDTODEVIC handling wrt. UDP socket demux.
Paolo Abeni, he gave us this.
11) Range check coalescing parameters in mlx4 driver, thank you Moshe
Shemesh.
12) Some ipv6 ICMP error handling fixes in rxrpc, from our good brother
David Howells.
13) Fix kexec on mlx5 by freeing IRQs in shutdown path. Daniel Juergens,
you're the best!
14) Don't send bonding RLB updates to invalid MAC addresses. Debabrata
Benerjee saved us!
15) Uh oh, we were leaking in udp_sendmsg and ping_v4_sendmsg. The ship
is now water tight, thanks to Andrey Ignatov.
16) IPSEC memory leak in ixgbe from Colin Ian King, man we've got holes
everywhere!
17) Fix error path in tcf_proto_create, Jiri Pirko what would we do
without you!
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (92 commits)
net sched actions: fix refcnt leak in skbmod
net: sched: fix error path in tcf_proto_create() when modules are not configured
net sched actions: fix invalid pointer dereferencing if skbedit flags missing
ixgbe: fix memory leak on ipsec allocation
ixgbevf: fix ixgbevf_xmit_frame()'s return type
ixgbe: return error on unsupported SFP module when resetting
ice: Set rq_last_status when cleaning rq
ipv4: fix memory leaks in udp_sendmsg, ping_v4_sendmsg
mlxsw: core: Fix an error handling path in 'mlxsw_core_bus_device_register()'
bonding: send learning packets for vlans on slave
bonding: do not allow rlb updates to invalid mac
net/mlx5e: Err if asked to offload TC match on frag being first
net/mlx5: E-Switch, Include VF RDMA stats in vport statistics
net/mlx5: Free IRQs in shutdown path
rxrpc: Trace UDP transmission failure
rxrpc: Add a tracepoint to log ICMP/ICMP6 and error messages
rxrpc: Fix the min security level for kernel calls
rxrpc: Fix error reception on AF_INET6 sockets
rxrpc: Fix missing start of call timeout
qed: fix spelling mistake: "taskelt" -> "tasklet"
...
This is not specific to BPF but was found when parsing a .c BPF proggie
that while valid, had no events attached to tracepoints, kprobes, etc:
Very minimal file that perf's BPF code can compile:
# cat empty.c
char _license[] __attribute__((section("license"), used)) = "GPL";
int _version __attribute__((section("version"), used)) = LINUX_VERSION_CODE;
#
Before this patch:
# perf trace -e empty.c
WARNING: event parser found nothinginvalid or unsupported event: 'empty.c'
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events
#
After:
# perf trace -e empty.c
WARNING: event parser found nothing
invalid or unsupported event: 'empty.c'
Run 'perf list' for a list of valid events
Usage: perf trace [<options>] [<command>]
or: perf trace [<options>] -- <command> [<options>]
or: perf trace record [<options>] [<command>]
or: perf trace record [<options>] -- <command> [<options>]
-e, --event <event> event/syscall selector. use 'perf list' to list available events
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-8ysughiz00h6mjpcot04qyjj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There have two spaces ahead function name cs_etm__set_pid_tid_cpu(), so
remove one space and correct indentation.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1525924920-4381-2-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
CoreSight doesn't allocate thread structure for unknown_thread in ETM
auxtrace, so unknown_thread is NULL pointer. If the perf data doesn't
contain valid tid and then cs_etm__mem_access() uses unknown_thread
instead as thread handler, this results in a segmentation fault when
thread__find_addr_map() accesses the thread handler.
This commit creates a new thread data which is used by unknown_thread, so
CoreSight tracing can roll back to use unknown_thread if perf data
doesn't include valid thread info. This commit also releases thread
data for initialization failure case and for normal auxtrace free flow.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1525924920-4381-1-git-send-email-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Right now, skipped tests are returning a failure exit code if /dev/kvm does
not exists. Consistently return a zero status code so that various scripts
over the interwebs do not complain. Also return a zero status code if
the KVM_CAP_SYNC_REGS capability is not present, and hardcode in the
test the register kinds that are covered (rather than just using whatever
value of KVM_SYNC_X86_VALID_FIELDS is provided by the kernel headers).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
BPF programs only have to specify the target kernel version for
tracing related hooks, in networking world that requirement does
not really apply. Loosen the checks in libbpf to reflect that.
bpf_object__open() users will continue to see the error for backward
compatibility (and because prog_type is not available there).
Error code for NULL file name is changed from ENOENT to EINVAL,
as it seems more appropriate, hopefully, that's an OK change.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fix spelling mistakes, improve and clarify the language of comments
in libbpf.h.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
There are two copies of event reading loop - in bpftool and
trace_helpers "library". Consolidate them and move the code
to libbpf. Return codes from trace_helpers are kept, but
renamed to include LIBBPF prefix.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Ask the kernel to include sample time in each even instead of
reading the clock. This is also more accurate because our
clock reading was done when user space would dump the buffer,
not when sample was produced.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Sync the header from include/uapi/linux/bpf.h which was updated to add
fib lookup helper function. This fixes selftests/bpf build failure.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
'|& ...' is a bash 4.0+ construct which is not guaranteed to be available
when using '$(shell ...)' in a Makefile. Fall back to the more portable
'2>&1 | ...'.
Fixes the following warning during compilation:
/bin/sh: 1: Syntax error: "&" unexpected
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Simple example of fast-path forwarding. It has a serious flaw
in not verifying the egress device index supports XDP forwarding.
If the egress device does not packets are dropped.
Take this only as a simple example of fast-path forwarding.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
- correct a typo in the value of 'matchPattern' of test 282d, potentially
causing false negative
- allow errors when 'teardown' executes '$TC action flush action bpf' in
test 282d, to fix false positive when it is run with act_bpf unloaded
- correct the value of 'matchPattern' in test e939, causing false positive
in case the BPF JIT is enabled
Fixes: 440ea4ae18 ("tc-testing: add selftests for 'bpf' action")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we perform the following command lines:
$ perf record -e "{cycles,branches}" ./div
$ perf annotate main --stdio
The output shows only the first event, "cycles" and the displaying
format is not correct.
Percent | Source code & Disassembly of div for cycles (44550 samples)
-----------------------------------------------------------------------------------
:
:
:
: Disassembly of section .text:
:
: 00000000004004b0 <main>:
: main():
:
: return i;
: }
:
: int main(void)
: {
0.00 : 4004b0: push %rbx
: int i;
: int flag;
: volatile double x = 1212121212, y = 121212;
:
: s_randseed = time(0);
0.00 : 4004b1: xor %edi,%edi
: srand(s_randseed);
0.00 : 4004b3: mov $0x77359400,%ebx
:
: return i;
: }
The issue is that the value of the 'nr_percent' variable is hardcoded to
1. This patch fixes it.
With this patch, the output is:
Percent | Source code & Disassembly of div for cycles (44550 samples)
-----------------------------------------------------------------------------------
:
:
:
: Disassembly of section .text:
:
: 00000000004004b0 <main>:
: main():
:
: return i;
: }
:
: int main(void)
: {
0.00 0.00 : 4004b0: push %rbx
: int i;
: int flag;
: volatile double x = 1212121212, y = 121212;
:
: s_randseed = time(0);
0.00 0.00 : 4004b1: xor %edi,%edi
: srand(s_randseed);
0.00 0.00 : 4004b3: mov $0x77359400,%ebx
:
: return i;
: }
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: f681d593d1 ("perf annotate: Remove disasm__calc_percent() from disasm_line__print()")
Link: http://lkml.kernel.org/r/1525881435-4092-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf test "probe libc's inet_pton & backtrace it with ping" fails on
4.17.0rc3 on s/390. It turned out that function __inet_pton is reported
as inline:
[root@s8360047 perf]# ./perf script -i /tmp/perf.data.111
ping 12457 [000] 1584.478959: probe_libc:inet_pton: (3ffb5a347e8)
1347e8 __inet_pton (inlined)
f19d7 gaih_inet.constprop.5 (/usr/lib64/libc-2.24.so)
f4c3f __GI_getaddrinfo (inlined)
410b main (/usr/bin/ping)
Allow __inet_pton listed as inline.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180503065837.71043-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Trivial fix to spelling mistake in dprintf message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
The BPF selftests fail to build with missing headers
'asm/bitsperlong.h' and 'asm/errno.h'.
These already exist in 'tools/arch/[arch]/include';
add architecture-agnostic header files in 'tools/include/uapi'
to reference them.
Signed-off-by: Sirio Balmelli <sirio@b-ad.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds test for BPF_BTF_GET_FD_BY_ID and the new
btf_id/btf_key_id/btf_value_id in the "struct bpf_map_info".
It also modifies the existing BPF_OBJ_GET_INFO_BY_FD test
to reflect the new "struct bpf_btf_info".
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch sync the tools/include/uapi/linux/btf.h with
the newly introduced BTF ID support.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds a CHECK() macro for condition checking
and error report purpose. Something similar to test_progs.c
It also counts the number of tests passed/skipped/failed and
print them at the end of the test run.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Minor conflict, a CHECK was placed into an if() statement
in net-next, whilst a newline was added to that CHECK
call in 'net'. Thanks to Daniel for the merge resolution.
Signed-off-by: David S. Miller <davem@davemloft.net>
When a script file that isn't generated uses the variable
TEST_GEN_PROGS_EXTENDED and a 'make -C tools/testing/selftests clean' is
performed the script file gets removed and git shows the file as
deleted. For script files that isn't generated TEST_PROGS_EXTENDED
should be used.
Fixes: 9faedd643f ("selftests: net: add in_netns.sh TEST_GEN_PROGS_EXTENDED")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The generated files udpgso* shouldn't be part of TEST_PROGS, they are
used by udpgso.sh and udpgsp_bench.sh. They should be added to the
TEST_GEN_FILES to get installed without being added to the main
run_kselftest.sh script.
Fixes: 3a687bef14 ("selftests: udp gso benchmark")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
As reported by Adrian Hunter, this breaks intel_pt event parsing:
# perf record -e intel_pt//u uname
event syntax error: 'intel_pt//u'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
#
This reverts commit 9a4a931ce8.
Reported-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ye1o2mji7x68xotiot1tn1gp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To sync with the changes made in 85bd0ba1ff ("arm/arm64: KVM: Add PSCI
version selection API"), that do not cause any changes in the tools,
just to silence the build warning:
Warning: Kernel ABI header at 'tools/arch/arm/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm/include/uapi/asm/kvm.h'
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-7u37pv09xtvet1ll27840w73@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The changes in 5e62493f1a ("x86/headers/UAPI: Move DISABLE_EXITS KVM
capability bits to the UAPI") do not requires changes in the tooling nor
will trigger the automatic update of used ioctl string tables, copy it
to silence this build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: KarimAllah Ahmed <karahmed@amazon.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-8o5auh1lqglsgl1q97x00tlv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 9124130573 ("x86/cpufeatures: Enumerate cldemote instruction")
doesn't requires changes in the tools, just copy it to silence this
warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-1vo20y5z2drlujfpltjudwk8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: William Cohen <wcohen@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180503195032.28871-1-wcohen@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'R' means access the data via reads instead of writes, fix this typo.
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1524644707-11030-1-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This was used by the ide, scsi and networking code in the past to
determine if they should bounce payloads. Now that the dma mapping
always have to support dma to all physical memory (thanks to swiotlb
for non-iommu systems) there is no need to this crude hack any more.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Palmer Dabbelt <palmer@sifive.com> (for riscv)
Reviewed-by: Jens Axboe <axboe@kernel.dk>
If a seccomp user is not interested in Speculative Store Bypass mitigation
by default, it can set the new SECCOMP_FILTER_FLAG_SPEC_ALLOW flag when
adding filters.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Users of BPF sooner or later discover perf_event_output() helpers
and BPF_MAP_TYPE_PERF_EVENT_ARRAY. Dumping this array type is
not possible, however, we can add simple reading of perf events.
Create a new event_pipe subcommand for maps, this sub command
will only work with BPF_MAP_TYPE_PERF_EVENT_ARRAY maps.
Parts of the code from samples/bpf/trace_output_user.c.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Artem Bityutskiy