Commit Graph

39 Commits

Author SHA1 Message Date
Yang, Bo e340c35372 [SCSI] megaraid_sas: Version and documentation update
Signed-off-by Bo Yang <bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-26 11:11:12 -05:00
Yang, Bo 1fd1068516 [SCSI] megaraid_sas: Add input parameter for max_sectors
Driver add the input parameters support for max_sectors for megaraid
sas gen2 chip.  Customer can set the max_sectors support to 1MB for
gen2 chip during the driver load.

Signed-off-by Bo Yang <bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-26 11:06:03 -05:00
bo yang 39a985547c [SCSI] megaraid_sas: Add Online Controller Reset to MegaRAID SAS drive
To add the Online controller reset support, driver need to do:
a). reset the controller chips -- Xscale and Gen2 which will change
the function calls and add the reset function related to this two
chips.
b). during the reset, driver will store the pending cmds which not
returned by FW to driver's pending queue.  Driver will re-issue those
pending cmds again to FW after the OCR finished.
c). In driver's timeout routine, driver will report to OS as reset.
Also driver's queue routine will block the cmds until the OCR
finished.
d). in Driver's ISR routine, if driver get the FW state as state
change, FW in Failure status and FW support online controller
reset (OCR), driver will start to do the controller reset.
e). In driver's IOCTL routine, the application cmds will wait for the
OCR to finish, then issue the cmds to FW.

Signed-off-by Bo Yang <bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-10-07 17:33:09 -05:00
Yang, Bo 63bad45db1 [SCSI] megaraid_sas: version and documentation update
Signed-off-by Bo Yang<bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17 13:13:00 -06:00
Yang, Bo bdc6fb8d69 [SCSI] megaraid_sas: add the logical drive list to driver
Driver issue the get ld list to fw to get the logic drive list.
Driver will keep the logic drive list for the internal use after
driver load.

Signed-off-by Bo Yang<bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17 13:12:10 -06:00
Yang, Bo a0b7736828 [SCSI] megaraid_sas: Update version number and documentation
Signed-off-by Bo Yang<bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-29 13:03:22 -04:00
Yang, Bo 7e8a75f4df [SCSI] megaraid_sas: Add the support for updating the OS after adding/removing the devices from FW
Driver will update the OS devices after adding and deleting the device
from FW.  When driver receive add or delete AEN from FW, driver will
send the DCMD cmd to get the System PD list from FW.  Then driver will
check if this device already in the OS: If add event and OS don't have
the device (but it is in the list), driver add the device to OS,
otherwise driver will not add.  If remove event, driver will check the
list, if is not in the list, but OS have the device, driver will
remove the device.

Signed-off-by Bo Yang<bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-29 13:03:21 -04:00
Yang, Bo 0c79e681ee [SCSI] megaraid_sas: Fix the fix for fw hang caused by megaraid sas application
Add a lock to the skinny firmware initialisation sequence to prevent
the two stage write being non atomic if multiple instances use it.

Add a flag to the driver shutdown sequence to prevent aen ioctls being
called after shutdown begins.

Signed-off-by Bo Yang<bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-29 13:03:21 -04:00
Yang, Bo f4c9a1317d [SCSI] megaraid_sas: add the IEEE SGE support to SAS2 controller
To increase the performance, megaraid sas driver added the IEEE SGE
support to support SAS2 controller.

Signed-off-by Bo Yang<bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-29 13:03:20 -04:00
Yang, Bo 7bebf5c79c [SCSI] megaraid_sas: allocate the application cmds to sas2 controller
MegaRAID SAS2 controller ioctl can't use 32 cmd for applications.
Driver need to divide different number of cmds to IO and application.

Signed-off-by Bo Yang<bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-29 13:03:20 -04:00
Yang, Bo 81e403ce3c [SCSI] megaraid_sas: infrastructure to get PDs from FW
Add system PDs to OS.  Driver implemented the get_pd_list function to
get the system PD from FW.

Signed-off-by Bo Yang<bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-29 13:03:19 -04:00
Yang, Bo 879111224d [SCSI] megaraid_sas: Add new megaraid SAS 2 controller support to the driver
Add the new megaraid sas 2 controller to the driver.  megaraid sas2 is
LSI next generation SAS products.  driver add the interface to support
this product.

Signed-off-by Bo Yang<bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-29 13:03:18 -04:00
Yang, Bo c35188377f [SCSI] megaraid_sas: Add poll mechanism to megaraid sas driver
Add Poll_wait mechanism to SAS-2 MegaRAID SAS Linux driver. Driver
will wakeup poll after the driver get event from MegaRAID SAS FW.

Signed-off-by Bo Yang<bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-29 13:03:18 -04:00
Yang, Bo 24541f99ba [SCSI] megaraid_sas: version and Documentation Update
Signed-off-by: Bo Yang <bo.yang@lsi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-08-16 10:13:33 -05:00
Yang, Bo 6610a6b354 [SCSI] megaraid_sas: add new controllers (0x78 0x79)
Add the new controllers (0x78 0x79) support to the driver.  Those
controllers are LSI's next generation (gen2) SAS controllers.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: parenthesise a macro]
Signed-off-by: Bo Yang <bo.yang@lsi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-08-16 10:13:32 -05:00
bo yang 127ce971ad [SCSI] megaraid_sas; Update the Version and Changelog
Update the Version and Changelog for megaraid_sas Driver

Signed-off-by: Bo Yang<bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-29 19:43:12 -05:00
bo yang af7a5647c0 [SCSI] megaraid_sas: Add the new controller(1078DE) support to the driver
Add the new Controller (ID: 007C) support to driver.

Signed-off-by Bo Yang<bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:00 -05:00
bo yang d532dbe2cb [SCSI] megaraid_sas: Fix the frame count calculation
When Driver sent wrong frame count to firmware.  As this particular
command is sent to drive, FW is seeing continuous chip resets and so
the command will timeout.

Signed-off-by Bo Yang<bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:00 -05:00
bo yang f28cd7cf8f [SCSI] megaraid_sas: Update version and changelog
Update version and changelog

Signed-off-by: Bo Yang <bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:22:44 -06:00
bo yang ad84db2e2e [SCSI] megaraid_sas: support for poll_mode_io (reduced interrupt)
Added module parameter "poll_mode_io" to support for "polling"
(reduced interrupt operation).  In this mode, IO completion interrupts
are delayed. At the end of initiating IOs, the driver schedules for
cmd completion if there are pending cmds.  A timer-based interrupt has
also been added to prevent IO completion from being delayed
indefinitely in the case that no new IOs are initiated.  Some
formatting issues in resume, suspend comment block also corrected

Signed-off-by: Bo Yang <bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:22:44 -06:00
bo yang 7343eb6570 [SCSI] megaraid_sas: call cmd completion from reset
Driver will call cmd completion routine from Reset path without waiting for cmd completion from isr context.

Signed-off-by: Bo Yang <bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:22:43 -06:00
bo yang 14faea9f7f [SCSI] megaraid_sas: check max_sgl reported by FW for setting max_sectors_per_req
1. Setting the max_sectors_per_req based on max SGL supported by the
   FW. Prior versions calculated this value from controller info's
   max_sectors_1, max_sectors_2. For certain controllers/FW, this was
   resulting in a value greater than max SGL supported by the FW. Now
   we take the min of max sgl from FW and max_sectors calculation.

2. Increased MFI_POLL_TIMEOUT_SECS to 60 seconds from 10. FW may take
   a max of 60 seconds to respond to the INIT cmd.

Signed-off-by: Bo Yang <bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:22:43 -06:00
bo yang 31ea708897 [SCSI] megaraid_sas: add hibernation support
Adding hibernation support. suspend, resume routine implemented.

Signed-off-by: Bo Yang <bo.yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:22:43 -06:00
Matthias Kaehlcke e5a69e27cc [SCSI] megaraid_sas: Convert aen_mutex to the mutex API
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Acked-by: Bo Yang <Bo.Yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:22:41 -06:00
Sumant Patro 05e9ebbefb [SCSI] megaraid_sas: intercept cmd timeout and throttle io
eh_timed_out call back (megasas_reset_timer) is used to throttle io
to the adapter when it is called the first time for a scmd.
The MEGASAS_FW_BUSY flag is set and can_queue reduced to 16.
The can_queue is restored from completion routine in following
two conditions : 5 seconds has elapsed and
the # of outstanding cmds in FW is < 17.

Signed-off-by: Sumant Patro <sumant.patro@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-24 09:08:27 -05:00
Sumant Patro cc5968c83e [SCSI] megaraid_sas: update version and author info
Signed-off-by: Sumant Patro <sumant.patro@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-16 10:44:12 -06:00
Randy Dunlap a69b74d39f [SCSI] megaraid: fix kernel-doc
kernel-doc modifications:
- change "@param var" notation to @var;
- change function/description separator from ':' to '-';
- change var/description separator from '-' to ':';
- fix a few doc. typos;
- don't use kernel-doc /** lead-in when the doc. block is not kernel-doc;
- use Linux common */ ending comment format instead of **/;
- use correct function parameter names;
- place function parameters immediately after the function short description;
- place kernel-doc immediately before its function or macro;

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Sumant Patro <sumantp@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13 13:55:01 -06:00
Sumant Patro 2a3681e56e [SCSI] megaraid_sas: sets ioctl timeout and updates version,changelog
This patch sets timeout of max 180 seconds for ioctl completion.
It also updates the Changelog and hikes the version to 3.05.

Signed-off-by: Sumant Patro <Sumant.Patro@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-04 12:55:29 -05:00
Sumant Patro 5d018ad057 [SCSI] megaraid_sas: adds tasklet for cmd completion
This patch adds a tasklet for command completion.

Signed-off-by: Sumant Patro <Sumant.Patro@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-04 12:53:42 -05:00
Sumant Patro 658dcedb4e [SCSI] megaraid_sas: prints pending cmds before setting hw_crit_error
This patch adds function to print the pending frame details before returning
failure from the reset routine. It also exposes a new variable megasas_dbg_lvl
that allows the user to set the debug level for logging.

Signed-off-by: Sumant Patro <Sumant.Patro@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-04 12:52:15 -05:00
Sumant Patro b274cab779 [SCSI] megaraid_sas: function pointer for disable interrupt
This patch adds function pointer to invoke disable interrupt for
xscale and ppc IOP based controllers. Removes old implementation that checks
for controller type in megasas_disable_intr.

Signed-off-by: Sumant Patro <Sumant.Patro@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-04 12:49:27 -05:00
Sumant Patro e3bbff9f3c [SCSI] megaraid_sas: FW transition and q size changes
This patch has the following enhancements :
        a. handles new transition states of FW to support controller hotplug.
        b. It reduces by 1 the maximum cmds that the driver may send to FW.
        c. Sends "Stop Processing" cmd to FW before returning failure from reset routine
        d. Adds print in megasas_transition routine
        e. Sends "RESET" flag to FW to do a soft reset of controller
to move from Operational to Ready state.
	f. Sending correct pointer (cmd->sense) to pci_pool_free

Signed-off-by: Sumant Patro <Sumant.Patro@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-04 12:45:19 -05:00
Sumant Patro 0e98936c92 [SCSI] megaraid_sas: zcr with fix
The patch adds support for a ZCR controller (Device ID : 0x413).

It also has a critical bug fix :

Disable controller interrupt before firing INIT cmd to FW.  Interrupt
is enabled after required initialization is over. This is done to
ensure that driver is ready to handle interrupts when it is generated
by the controller.

Signed-off-by: Sumant Patro <Sumant.Patro@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-26 09:29:07 -05:00
Sumant Patro e4a082c7c1 [SCSI] megaraid_sas: switch fw_outstanding to an atomic_t
This patch( originally submitted by Christoph Hellwig) removes
instance_lock and changes fw_outstanding variable data type to
atomic_t.

Signed-off-by: Sumant Patro <Sumant.Patro@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-06 10:57:18 -04:00
Sumant Patro f9876f0b67 [SCSI] megaraid_sas: support for 1078 type controller added
This patch adds support for 1078 type controller (device id : 0x60).

Signed-off-by: Sumant Patro <Sumant.Patro@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04 16:38:41 -06:00
Joshua Giles 122da30223 [SCSI] megaraid_sas: register 16 byte CDB capability
This patch properly registers the 16 byte command length capability of
the megaraid_sas controlled hardware with the scsi midlayer.  All
megaraid_sas hardware supports 16 byte CDB's.

Signed-off-by: Joshua Giles <joshua_giles@dell.com>
Signed-off-by: Sumant Patro <Sumant.Patro@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-04 16:37:29 -06:00
Sumant Patro 1341c93922 [SCSI] megaraid_sas: new template defined to represent each type of controllers
This patch defines a new template to represent each type of
controllers (identified by the processor used). The template has
members that is set with appropriate values during driver
initialisation. This change is done to support new controllers with
minimal change to existing code. In future, for a new controller
support, a template will be declared and its members initialised
appropriately.

Signed-off-by: Sumant Patro <Sumant.Patro@lsil.com>

Rejections fixed and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-29 11:25:30 -06:00
Sumant Patro cb59aa6a7c [SCSI] megaraid_sas: cleanup queue command path
This patch (originally submitted by Christoph Hellwig) removes code
duplication in megasas_build_cmd.  It also defines
MEGASAS_IOC_FIRMWARE32 to allow 64 bit compiled applications to work.

Signed-off-by: Sumant Patro <Sumant.Patro@lsil.com>

Rejections fixed and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-29 11:18:16 -06:00
Bagalkote, Sreenivas c4a3e0a529 [SCSI] MegaRAID SAS RAID: new driver
Signed-off-by: Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-26 17:32:44 -05:00