... so that the parser code can overwrite some optional ops. For
Realtek and others, it can be set solely in the spec allocator, so it
results in a good code cleanup, too.
With this change, we can finally remove the local stream_pm setup and
rely on the generic parser's automatic setting.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit [49fb18972581: ALSA: hda - Set stream_pm ops automatically
by generic parser] resulted in regressions on some Realtek and VIA
codecs because these drivers set patch_ops after calling the generic
parser, thus stream_pm got cleared to NULL again. I haven't noticed
since I tested with IDT codec.
Restore (partial revert) the stream_pm ops for them to fix the
regression.
Fixes: 49fb189725 ('ALSA: hda - Set stream_pm ops automatically by generic parser')
Reported-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Build emuproc.o conditionally and drop the unneeded ifdefs.
Some are replaced with the new CONFIG_SND_PROC_FS.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Build ca0106_proc.o conditionally to drop unneeded ifdef.
Some are replaced with the new CONFIG_SND_PROC_FS.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When headphone mic boost is above zero, some 10 - 20 second delay
might occur before the headphone mic is operational.
Therefore disable the headphone mic boost control (recording gain is
sufficient even without it).
(Note: this patch is not about the headset mic, it's about the less
common mic-in only mode.)
BugLink: https://bugs.launchpad.net/bugs/1454235
Suggested-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We may disable proc fs only for sound part, to reduce ALSA
memory footprint. So add CONFIG_SND_PROC_FS and replace the
old CONFIG_PROC_FSs in alsa code.
With sound proc fs disabled, we can save about 9KB memory
size on X86_64 platform.
Signed-off-by: Jie Yang <yang.jie@intel.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We've got a regression report that 4.1-rc causes noises on a Dell
laptop. Similar like Realtek codec, this seems also triggered by the
recent power_save_node feature. As this kind of issue is quite hard
to debug without actual hardware, disable the power_save_node flag for
this codec as a workaround.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98971
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A new AMD controller [1002:aac8] seems to need the quirk for other AMD
NS HDMI stuff, otherwise it gives noisy sounds.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=99021
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This allows user to test power_save_node feature via sysfs or patch
firmware even on the codecs that don't specify it. It'll also save a
few lines.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Spotted by sparse:
sound/pci/lx6464es/lx6464es.c:415:47: warning: Using plain integer as NULL pointer
sound/pci/lx6464es/lx6464es.c:417:48: warning: Using plain integer as NULL pointer
Signed-off-by: Takashi Iwai <tiwai@suse.de>
PCI_DEVICE() macro itself defines SSID entries while we override them
after that. Replace with a more appropriate macro, PCI_DEVICE_SUB()
to define all ID values properly.
Spotted by sparse:
sound/pci/lx6464es/lx6464es.c:60:11: warning: Initializer entry defined twice
sound/pci/lx6464es/lx6464es.c:61:12: also defined here
sound/pci/lx6464es/lx6464es.c:64:11: warning: Initializer entry defined twice
sound/pci/lx6464es/lx6464es.c:65:12: also defined here
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 7290006d8c.
Through the regression report, it was revealed that the
tpacpi_led_set() call to thinkpad_acpi helper doesn't only toggle the
mute LED but actually mutes the sound. This is contradiction to the
expectation, and rather confuses user.
According to Henrique, it's not trivial to judge which TP model
behaves "LED-only" and which model does whatever more intrusive, as
Lenovo's implementations vary model by model. So, from the safety
reason, we should revert the patch for now.
Reported-by: Martin Steigerwald <martin@lichtvoll.de>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We've got reports that ALC3226 (a Dell variant of ALC292) gives click
noises at transition from D3 to D0 when the widget power-saving is
enabled. Further debugging session showed that avoiding it isn't
trivial, unfortunately, since paths are basically activated
dynamically while the pins have been already enabled.
This patch disables the widget power-saving for such codecs.
Reported-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The widget (node) power-saves restore the widget states at each
transition from D3 to D0 on each node. This was added in the commit
[d545a57c5f84:ALSA: hda - Sync node attributes at resume from widget
power saving]. However, the test was rater false-positive; this
wasn't needed for any codecs.
Since the resync may take significant number of additional verbs to be
executed, it's better to reduce it. Let's disable it for now again.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The file is moved to hda core and renamed to hdac_i915.c, so can be used
by both legacy HDA driver and new Skylake audio driver.
- Add snd_hdac_ prefix to the public APIs.
- The i915 audio component is moved to core bus and dynamically allocated.
- A static pointer hdac_acomp is used to help bind/unbind callbacks to get
this component, because the sound card's private_data is used by the azx
chip pointer, which is a legacy structure. It could be removed if private
_data changes to some core structure which can be extended to find the
bus.
- snd_hdac_get_display_clk() is added to get the display core clock for
HSW/BDW.
- haswell_set_bclk() is moved to hda_intel.c because it needs to write the
controller registers EM4/EM5, and only legacy HD-A needs it for HSW/BDW.
- Move definition of HSW/BDW-specific registers EM4/EM5 to hda_register.h
and rename them to HSW_EM4/HSW_EM5, because other HD-A controllers have
different layout for the extended mode registers.
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Modern machines tend to have only one headset jack nowadays, and they
often need these quirks. Let's allow them applicable via model
option for ease of debugging.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds quirks detection to the Creative CA0132 codec, and the
quirk for Alienware 15 (2015).
Some quirks may need different pin configuration, so the relevant
compile-time configuration has been removed.
The pin configuration and related initialization verbs are generated at
runtime instead, in ca0132_config() and ca0132_prepare_verbs().
Signed-off-by: Gabriele Martino <g.martino@gmx.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch creates hda_intel_trace.h to add some pm trace functions
used in hda_intel.c
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch does:
1. Rename the hda_intel_trace.h to hda_controller_trace.h as
this trace is used in hda_controller.c
2. Add some trace function for pcm flow.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tegra210 contains a similar codec as Tegra124 and can be supported using
the same patch function.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tegra114 contains the same codec as Tegra124 and can be supported using
the same patch function.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tegra30 contains the same codec as Tegra124 and can be supported using
the same patch function.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When probing, provide accurate error messages to help with debugging
failures.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HDMI codec on NVIDIA Tegra SoCs has a feature that doesn't exist on
the MCP or GPU variants. The highest bit in the vendor-defined scratch
registers can be used to trigger an interrupt in the HDMI codec, which
is signalled to the HDMI driver. This can be used to pass information,
such as the HDA format, to the HDMI driver so that it can reconfigure
itself accordingly.
While at it, change the name of the codec to Tegra124 since there are no
other SoCs in the Tegra12x family. There isn't really a Tegra12x family.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is set for the MCP variants of the NVIDIA HDA controller, which the
Tegra variant was derived from. This fixes the following warning at boot
time:
[ 2.486610] tegra-hda 70030000.hda: CORB reset timeout#1, CORBRP = 0
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Dell create new platform with ALC298 codec.
This patch will enable headset mode for ALC298/ALC3266 platform.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Lenovo ThinkPad L450 requires the ALC292_FIXUP_TPT440_DOCK fix in
order to get sound output on the docking stations audio port.
This patch was tested using a ThinkPad L450 (20DSS00B00) using kernel
4.0.3 and a ThinkPad Pro Dock.
Signed-off-by: Ansgar Hegerfeld <linux@hegerfeld.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds support for Conexant HD Audio codecs
CX20721, CX20722, CX20723 and CX20724.
Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/bugs/1454656
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALC662 does not need any special verbs to change the jack functionality,
and enables mic in through the headphone jack mode by changing the
direction of the headphone pin node.
BugLink: https://bugs.launchpad.net/bugs/1454235
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This enables the headset microphone on Dell Inspiron 5548,
or at least some variants of it.
Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/bugs/1452175
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In SKL, HDMI/DP codec and PCH HD Audio Controller are in different power wells,
so it's necessary to reset display audio codecs when power well on, otherwise
display audio codecs will disappear when resume from low power state.
Reset steps when power on:
enable codec wakeup -> azx_init_chip() -> disable codec wakeup
The callback for codec wakeup enable/disable is in drivers/gpu/drm/i915/.
Signed-off-by: Lu, Han <han.lu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Building errors reported such as below when 'CONFIG_INPUT=m':
...undefined reference to `input_xxx'...
Here change to enable SND_JACK selectively to fix the issue.
Also remove the config 'SND_HDA_INPUT_JACK' which won't be
used anymore.
Signed-off-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fujitsu Lifebook E752 laptop needs a similar quirk done for Lifebook
T731. Otherwise the headphone is always muted.
Reported-and-tested-by: Christian Weber <we_chris@hotmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We're providing dummy functions for CONFIG_SND_HDA_i915=n, thus ifdef
can be reduced. (But hda_i915_init() has to be fixed to return zero.)
This automatically fixes a compile warning:
sound/pci/hda/hda_intel.c: In function 'azx_probe_continue':
sound/pci/hda/hda_intel.c:1966:1: warning: label 'i915_power_fail' defined but not used [-Wunused-label]
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For Baytrail (Valleyview) and Braswell (Cherryview), only the HDMI codec is
in the display power well while the HD-A controller isn't. So the controller
flag 'need_i915_power' is not set to release the display power after probe,
and the codec flag 'link_power_control" is set to request/release the display
power via bus link_power ops.
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch can improve power saving for Intel platforms on which only the
display audio codec is in the shared i915 power well:
- Add a flag "need_i915_power" to indicate whether the controller needs the
i915 power well.
- The driver will always request the i915 power when probing the controller
and codecs if AZX_DCAPS_I915_POWERWELL is set (either the controller or a
codec needs this power).
- If the controller needs the i915 power, the power will be held after probe
until the controller is runtime suspended or S3. If the controller doesn't
need the power, the power will be released the after probe, and a codec
that needs the power can request/release the power via bus link_power ops.
Background:
- For Haswell/Broadwell, which has a separate HD-A controller for display audio,
both the controller and the display codec are in the i915 power well.
- For Baytrail/Braswell, the display and analog audio share the same HDA
controller and link, and only the display codec is in the i915 power well.
- For Skylake, the display and analog audio share the same HDA controller but
use separate links. Only the display codec is in the i915 power well. And in
legacy mode we take the two links as one. So it can follow Baytrail/Braswell.
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai