Commit Graph

163 Commits

Author SHA1 Message Date
Jiri Slaby fde5be353e HID: remove setup mutex, fix possible deadlock
It causes recursive locking warning and is unneeded after
introduction of STARTED flag.

* Resume vs. stop is effectively solved by DISCONNECT flag.
* No problem in suspend vs. start -- urb is submitted even after open
  which is possible after connect which is called after start.
* Resume vs. start solved by STARTED flag.
* Suspend vs. stop -- no problem in killing urb and timer twice.

Reported-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-23 12:03:20 +01:00
Jiri Slaby 131d3a7a00 HID: don't grab devices with no input
Some devices have no input interrupt endpoint. These won't be handled
by usbhid, but currently they are not refused and reside on hid bus.

Perform this checking earlier so that we refuse to control such
a device early enough (and not pass it to the hid bus at all).

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-14 14:10:01 +01:00
Jiri Slaby e3e14de50d HID: fix start/stop cycle in usbhid driver
`stop' left out usbhid->urb* pointers and so the next `start' thought
it needs to allocate nothing and used the memory pointers previously
pointed to. This led to memory corruption and device malfunction.

Also don't forget to clear disconnect flag on start which was left set
by the previous `stop'.

This fixes

	echo DEVICE > /sys/bus/hid/drivers/DRIVER/unbind
	echo DEVICE > /sys/bus/hid/drivers/DRIVER/bind

failures.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-11-13 10:31:36 +01:00
Al Viro 233e70f422 saner FASYNC handling on file close
As it is, all instances of ->release() for files that have ->fasync()
need to remember to evict file from fasync lists; forgetting that
creates a hole and we actually have a bunch that *does* forget.

So let's keep our lives simple - let __fput() check FASYNC in
file->f_flags and call ->fasync() there if it's been set.  And lose that
crap in ->release() instances - leaving it there is still valid, but we
don't have to bother anymore.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-01 09:49:46 -07:00
Jiri Slaby b170060c6c HID: sync on deleted io_retry timer in usbhid driver
When suspending, make sure that the timer is not running
any more.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-27 15:07:08 +01:00
Jiri Slaby 3d5afd324a HID: fix oops during suspend of unbound HID devices
Usbhid structure is allocated on start invoked only from probe
of some driver. When there is no driver, the structure is null
and causes null-dereference oopses.

Fix it by allocating the structure on probe and disconnect of
the device itself. Also make sure we won't race between start
and resume or stop and suspend respectively.

References: http://bugzilla.kernel.org/show_bug.cgi?id=11827

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Andreas Schwab <schwab@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-27 15:06:01 +01:00
Linus Torvalds ecc96e7920 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Add support for Sony Vaio VGX-TP1E
  HID: fix lock imbalance in hiddev
  HID: fix lock imbalance in hidraw
  HID: fix hidbus/appletouch device binding regression
  HID: add hid_type to general hid struct
  HID: quirk for OLED devices present in ASUS G50/G70/G71
  HID: Remove "default m" for Thrustmaster and Zeroplus
  HID: fix hidraw_exit section mismatch
  HID: add support for another Gyration remote control
  Revert "HID: Invert HWHEEL mappings for some Logitech mice"
2008-10-26 16:34:14 -07:00
Jiri Slaby eb9910894d HID: fix lock imbalance in hiddev
Don't forget to unlock_kernel() in hiddev_ioctl_usage().
Added in 7961df1681
(HID: Switch hiddev to unlocked_ioctl).

Corresponing sparse warning:
drivers/hid/usbhid/hiddev.c:515:10: warning: context imbalance in 'hiddev_ioctl_usage': wrong count at exit
drivers/hid/usbhid/hiddev.c:515:10:    context 'kernel_lock': wanted 0, got 1

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-23 01:47:34 +02:00
Jiri Slaby a73a63701f HID: add hid_type to general hid struct
Add type to the hid structure to distinguish to which device type
(now only mouse) we are talking to. Needed for per device type ignore
list support.

Note: this patch leaves the type as unknown for bluetooth devices,
there is not support for this in the hidp code.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-22 14:45:11 +02:00
Greg Kroah-Hartman 46fcaec505 USB: remove warn macro from HID core
There were two stragglers that got missed in the last merge of the HID tree that forgot to change the warn() calls to dev_warn().  This patch fixes them up.

Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-17 14:41:09 -07:00
From: Greg Kroah-Hartman 7d89fe12bd HID: remove warn() macro from usb hid drivers
USB should not be having it's own printk macros, so remove warn() and
use the system-wide standard of dev_warn() wherever possible.  In the
few places that will not work out, use a basic printk().

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:51:03 +02:00
Greg Kroah-Hartman ddbe324919 HID: remove info() macro from usb HID drivers
USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:51:03 +02:00
Anssi Hannula f129ea6d1e HID: fix a lockup regression when using force feedback on a PID device
Commit 8006479c9b introduced a spinlock in
input_dev->event_lock, which is locked when handling input events.
However, the hid-pidff driver sleeps when handling events as it waits for
reports being sent to the device before changing the report contents
again.
This causes a system lockup when trying to use force feedback with a PID
device, a regression introduced in 2.6.24 and 2.6.23.15.

Fix it by extracting the raw report data from struct hid_report
immediately when hid_submit_report() is called, therefore allowing
drivers to change the contents of struct hid_report immediately without
affecting the already-queued transfer.

In hid-pidff, re-add the removed usbhid_wait_io() to
pidff_erase_effect() instead, to prevent a full report queue from causing
the submission to fail, thus not freeing up device memory.
pidff_erase_effect() is not called while dev->event_lock is held.

Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:51:02 +02:00
Jiri Slaby 76483cf4d0 HID: remove hid-ff
hid-ff.c now calls only pidff (generic driver), the special ones are now
in separate drivers. Invoke pidff on all non-special directly.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:51:01 +02:00
Jiri Slaby 987fbc1f7d HID: move zeroplus FF processing
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:51:01 +02:00
Jiri Slaby 10e41a711e HID: move thrustmaster FF processing
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:51:00 +02:00
Jiri Slaby 5f022298aa HID: move pantherlord FF processing
Move the force feedback processing into a separate module.

[jkosina@suse.cz: fix Kconfig texts a little bit]

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:51:00 +02:00
Jiri Kosina 66ebf66e49 HID: add support for Super Dual Box Pro USB PS2/PS2 adapter
This seems to be the very same device, as already supported Smartjoy
dual Plus, but with slightly different vendor ID. Let's support this
one too.

Reported-by: David Ashley <dashxdr@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:57 +02:00
Jiri Slaby 606bd0a861 HID: move logitech FF processing
Merge the logitech force feedback processing directly into logitech
driver from the usbhid core.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:56 +02:00
Jiri Slaby 6edfa8dc33 HID: move reset leds quirk
Move the handling of the leds resetting from the core to
the dell and logitech drivers.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:56 +02:00
Jiri Slaby 93c10132a7 HID: move connect quirks
Move connecting from usbhid to the hid layer and fix also hidp in
that manner.
This removes all the ignore/force hidinput/hiddev connecting quirks.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:56 +02:00
Jiri Slaby fea6f1833b HID: move dell quirks
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:55 +02:00
Jiri Slaby bd28ce008b HID: move sony quirks
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:55 +02:00
Jiri Slaby 2b88b80301 HID: remove rdesc quirk support
Remove support for both dynamic and static report descriptor
quirks. There is no longer rdesc code which it would support,
so it's useless.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:55 +02:00
Jiri Slaby 980a3da6ac HID: move samsung quirks
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:54 +02:00
Jiri Slaby 3b8006e510 HID: move monterey quirks
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:53 +02:00
Jiri Slaby 1e76253220 HID: move petalynx quirks
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:53 +02:00
Jiri Slaby b5635b129b HID: move belkin quirks
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:53 +02:00
Jiri Slaby 1f243e302c HID: move ezkey quirks
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:52 +02:00
Jiri Slaby 3b239cd739 HID: move cherry quirks
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:52 +02:00
Jiri Slaby 14a21cd459 HID: move a4tech quirks
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:51 +02:00
Jiri Slaby 0f2213208f HID: move cypress quirks
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:51 +02:00
Jiri Slaby 90231e7eaf HID: move sunplus quirks
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:51 +02:00
Jiri Slaby 78a849a682 HID: move microsoft quirks
Move them from the core code to a separate driver.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:50 +02:00
Jiri Slaby 880d29f109 HID: indent switches/cases
Bring switch and cases into coding style and save thus some
indentation to make the code tighter.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:50 +02:00
Jiri Slaby 8c19a51591 HID: move apple quirks
Move them from the core code to a separate driver.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:49 +02:00
Jiri Slaby d458a9dfc4 HID: move ignore quirks
Move ignore quirks from usbhid-quirks into hid-core code. Also don't output
warning when ENODEV is error code in usbhid and try ordinal input in hidp
when that error is returned.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:49 +02:00
Jiri Slaby 5f22a79923 HID: move logitech quirks
Move them from the core and input code to a separate driver.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:49 +02:00
Jiri Slaby 990436a7c9 HID: move ids into separate file
Move ids from hid-quirks.c into separate file, since it will be needed in
more than one place.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:48 +02:00
Jiri Slaby c500c97140 HID: hid, make parsing event driven
Next step for complete hid bus, this patch includes:
- call parser either from probe or from hid-core if there is no probe.
- add ll_driver structure and centralize some stuff there (open, close...)
- split and merge usb_hid_configure and hid_probe into several functions
  to allow hooks/fixes between them

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:48 +02:00
Jiri Slaby 85cdaf524b HID: make a bus from hid code
Make a bus from hid core. This is the first step for converting all the
quirks and separate almost-drivers into real drivers attached to this bus.

It's implemented to change behaviour in very tiny manner, so that no driver
needs to be changed this time.

Also add generic drivers for both usb and bt into usbhid or hidp
respectively which will bind all non-blacklisted device. Those blacklisted
will be either grabbed by special drivers or by nobody if they are broken at
the very rude base.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-10-14 23:50:48 +02:00
Henrik Rydberg f89bd95c5c Input: bcm5974 - add driver for Macbook Air and Pro Penryn touchpads
This driver adds support for the multitouch trackpad on the new
Apple Macbook Air and Macbook Pro Penryn laptops. It replaces the
appletouch driver on those computers, and integrates well with the
synaptics driver of the Xorg system.

[dtor@mail.ru: various cleanups]
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-08-08 16:23:01 -04:00
Jiri Kosina b22d837006 Merge branches 'upstream' and 'upstream-fixes' into for-linus 2008-07-23 15:26:10 +02:00
Jiri Kosina acc0b7c409 HID: remove quirk lookup from usbkbd/usbmouse
This patch completely removes the dependency of usbkbd and usbmouse drivers
on usbhid code.

usbkbd/usbmouse drivers are not needed in the vast majority of cases anyway,
and they shouldn't be loaded in standard configurations at all. They are supposed
to be as trivial as possible, and searching for HID_QUIRK_IGNORE can even be
bad in some cases.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-07-23 15:25:22 +02:00
Jiri Kosina 2c3e3bfbb6 HID: add quirk for Logitech DiNovo desktop
Logitech DiNovo desktop needs the same quirk as other DiNovo
devices.

Reported-by: Farid Benamrouche <farid.benamrouche@free.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-07-23 15:25:21 +02:00
Jiri Slaby dc25b78f21 HID: fix quirk handling in usbmouse/kbd
When usbmouse/kbd is set to build, USB_HID is never defined due to
the USB_HID!=y Kconfig rule. Test CONFIG_USB_HID_MODULE in both
drivers instead.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-07-23 15:25:21 +02:00
Dan Nicholson 740f370dc6 HID: Invert HWHEEL mappings for some Logitech mice
Some Logitech mice have a tilt wheel which register as HWHEEL buttons.
The events are positive for a click to the right and negative for a
click to the left. Applications expect the opposite, though.

I suspect this affects a lot more Logitech mice, but these are the only
two I have. I tested this using evtest and a GTK application. A similar
Microsoft Intellimouse I have works correctly.

Signed-off-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-07-23 15:25:21 +02:00
Ming Lei a44ebccea8 HID:usbkbd:mark usb_kbd_keycode array as const
mark it as const because it is read only

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-07-23 15:25:21 +02:00
Alexandre Karpenko 37cdffdadf HID: add fn key support on Macbook Pro 4,1 and Macbook Air
Added device ids to hid-quriks for detection of keyboards on 4th
generation Macbook Pro and Macbook Air

The naming scheme is consistent with past Apple keyboards in hid-quirks;
as defined by Apple (including device ids) in:
/System/Library/Extensions/AppleUSBTopCase.kext/Contents/PlugIns/AppleUSBTCKeyboard.kext/Co
ntents/Info.plist
Patch was originally posted and tested at:
https://bugs.launchpad.net/mactel-support/+bug/207127

Signed-off-by: Alexandre Karpenko <alexander@comm.utoronto.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-07-23 15:25:20 +02:00
Jiri Kosina 00b33277fa HID: remove unused variable from hiddev compat ioctl
Remove unused inode variable from hiddev compat ioctl handler.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2008-07-23 15:21:55 +02:00