If regwshift is 32 and the selected architecture compiles '<<' operator
for signed int literal into rotating shift, '1<<regwshift' became 1 and
it makes regwmask to 0x0.
The literal is set to unsigned long to get intended regwmask.
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/001001d60665$db7af3e0$9270dba0$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This avoids residual bit form previous format when the format is changed.
Hence, the resultant format is not an invalid one.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Link: https://lore.kernel.org/r/20200328093921.32211-1-akshu.agrawal@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The NULL check can be done gracefully without cast. It fixes a
compile warning like:
sound/soc/bcm/bcm63xx-pcm-whistler.c:184:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
Fixes: 88eb404ccc ("ASoC: brcm: Add DSL/PON SoC audio driver")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200330135645.9707-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The following warning is seen with 'make dt_binding_check':
Documentation/devicetree/bindings/sound/cirrus,cs42l51.example.dts:18.15-34.11: Warning (unit_address_vs_reg): /example-0/i2c@0: node has a unit name, but no reg or ranges property
Fix it by removing the unneeded i2c unit name.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200327155721.7596-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To handle multiple hardware combinations, this patchset suggests a
single machine driver which will create and initialize dailinks
dynamically. This allows us to support new configurations easily, as
shown with the TigerLake rt5682 example.
Each configuration updates the card component string, and UCM can test
for the presence of components to configure them as needed.
Since we use a single the machine driver name, all previous ACPI
tables need to be updated. That should have no impact since the
machine drivers listed at the time were not upstreamed and are no
longer maintained.
Naveen Manohar (2):
ASoC: Intel: common: add match table for TGL RT5682 SoundWire driver
ASoC: Intel: sof_sdw: Add Volteer support with RT5682 SNDW helper
function
Pierre-Louis Bossart (1):
ASoC: Intel: boards: add sof_sdw machine driver
Rander Wang (1):
ASoC: Intel: soc-acpi: update topology and driver name for SoundWire
platforms
sound/soc/intel/boards/Kconfig | 24 +
sound/soc/intel/boards/Makefile | 8 +-
sound/soc/intel/boards/sof_sdw.c | 962 ++++++++++++++++++
sound/soc/intel/boards/sof_sdw_common.h | 114 +++
sound/soc/intel/boards/sof_sdw_dmic.c | 42 +
sound/soc/intel/boards/sof_sdw_hdmi.c | 97 ++
sound/soc/intel/boards/sof_sdw_rt1308.c | 151 +++
sound/soc/intel/boards/sof_sdw_rt5682.c | 126 +++
sound/soc/intel/boards/sof_sdw_rt700.c | 125 +++
sound/soc/intel/boards/sof_sdw_rt711.c | 156 +++
sound/soc/intel/boards/sof_sdw_rt715.c | 42 +
.../intel/common/soc-acpi-intel-cml-match.c | 24 +-
.../intel/common/soc-acpi-intel-icl-match.c | 6 +-
.../intel/common/soc-acpi-intel-tgl-match.c | 30 +-
14 files changed, 1896 insertions(+), 11 deletions(-)
create mode 100644 sound/soc/intel/boards/sof_sdw.c
create mode 100644 sound/soc/intel/boards/sof_sdw_common.h
create mode 100644 sound/soc/intel/boards/sof_sdw_dmic.c
create mode 100644 sound/soc/intel/boards/sof_sdw_hdmi.c
create mode 100644 sound/soc/intel/boards/sof_sdw_rt1308.c
create mode 100644 sound/soc/intel/boards/sof_sdw_rt5682.c
create mode 100644 sound/soc/intel/boards/sof_sdw_rt700.c
create mode 100644 sound/soc/intel/boards/sof_sdw_rt711.c
create mode 100644 sound/soc/intel/boards/sof_sdw_rt715.c
--
2.20.1
There are a couple of statements that are not indented correctly,
add in the missing tab and break the lines to address a checkpatch
warning.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200327141429.269191-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove undocumented and unneeded ti,use-internal-reg from the example as
it was an artifact from initial development. The code does not query
for this property and as the document indicates if areg-supply is
undefined then the internal regulator is used.
Fixes: 302c0b7490cd ("dt-bindings: sound: Add TLV320ADCx140 dt
bindings")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
CC: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200327162432.17067-1-dmurphy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for Google Volteer device. As per new unified soundwire machine
driver, add rt5682-sdw helper function, which configures codec to Link0.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Link: https://lore.kernel.org/r/20200325220746.29601-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This machine driver provides support for different configurations:
RT700, RT711, RT1308 (1x and 2x, I2S or SoundWire mode), and RT715
CometLake, Icelake, TigerLake.
PDM digital microphones
HDMI
To avoid introducing one driver per configuration, this common machine
driver relies on platform-specific information, tables and quirks to
dynamically create the relevant dailinks.
Unlike a lot of machine drivers, we use different DAI links for
SoundWire capture and playback since the Cadence PDIs can do capture
OR playback, not both simultaneously.
For each configuration, the card component string is updated so that UCM
can select the relevant parts.
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200325220746.29601-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update topology and reflect change to unified machine driver for SoundWire.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325220746.29601-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patchset provides the support for SoundWire support on Intel
CometLake, IcelLake and TigerLake RVP platforms and form-factor
devices to be released 'soon'.
The bulk of the code is about detecting a valid SoundWire
configuration from ACPI, and implementing the interfaces suggested in
'[PATCH 0/8] soundwire: remove platform devices, add SOF interfaces'
for interrupts, PCI wakes and clock-stop configurations.
Since that SoundWire series will not be in 5.7, the build support for
SOF w/ SoundWire is not provided for now, and fall-back functions will
be used. This code is tested on a daily basis in the SOF tree and is
not expected to change in significant ways.
Changes since v2:
Corrected error in ACPI table (thanks Amadeusz)
Added patch 11 to add reset cycle required on some SoundWire platforms
Bard Liao (1):
ASoC: SOF: Intel: hda: merge IPC, stream and SoundWire interrupt
handlers
Pierre-Louis Bossart (8):
ASoC: soc-acpi: expand description of _ADR-based devices
ASoC: SOF: Intel: add SoundWire configuration interface
ASoC: SOF: IPC: dai-intel: move ALH declarations in header file
ASoC: SOF: Intel: hda: add SoundWire stream config/free callbacks
ASoC: SOF: Intel: hda: initial SoundWire machine driver autodetect
ASoC: SOF: Intel: hda: disable SoundWire interrupts on suspend
ASoC: SOF: Intel: hda: add parameter to control SoundWire clock stop
quirks
ASoC: SOF: Intel: hda-ctrl: add reset cycle before parsing
capabilities
Rander Wang (2):
ASoC: SOF: Intel: hda: add WAKEEN interrupt support for SoundWire
Asoc: SOF: Intel: hda: check SoundWire wakeen interrupt in irq thread
include/sound/soc-acpi.h | 39 +-
include/sound/sof/dai-intel.h | 18 +-
.../intel/common/soc-acpi-intel-cml-match.c | 87 +++-
.../intel/common/soc-acpi-intel-icl-match.c | 97 ++++-
.../intel/common/soc-acpi-intel-tgl-match.c | 49 ++-
sound/soc/sof/intel/hda-ctrl.c | 25 +-
sound/soc/sof/intel/hda-dsp.c | 2 +
sound/soc/sof/intel/hda-loader.c | 31 ++
sound/soc/sof/intel/hda.c | 400 ++++++++++++++++++
sound/soc/sof/intel/hda.h | 66 +++
10 files changed, 750 insertions(+), 64 deletions(-)
--
2.20.1
The SoundWire mode doesn't need the DAI clocks.
Therefore, the DAI clock registry moves to I2S mode case.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20200327073849.18291-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If pci device is in D0, wakeen interrupt will be
aggregated at cAVS level as interrupt. This commit
check the wakeen status and process it in irq thread
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a SoundWire link is in clock stop state, a Slave device may wake
up the Master for some events such as jack detection. The WAKEEN
interrupt will be triggered and processed by the audio pci device.
If audio device is in D3, the interrupt will be routed to PME, or
aggregated at cAVS level as interrupt when audio device is in D0. This
patch only supports D3 case, where the audio pci device will be
resumed by a PME event and the WAKEEN interrupt will be processed
after audio pci device is powered up and ROM is initialized
successfully.
The WAKEEN handling is only enabled after the first boot due to
dependencies on a shim_lock mutex being initialized.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have a single irq handler for SOF interrupts. We can further merge
SoundWire ones to completely remove MSI interrupts handling issues
leading to timeouts.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Doing this avoid conflicts and errors reported on the bus.
The interrupts are only re-enabled on resume after the firmware is
downloaded, so the behavior is not fully symmetric
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For now we have a limited number of machine driver configurations, and
we can detect them based on the link configuration returned after
checking hardware and firmware (BIOS) configurations.
The link configuration is checked with a link_mask as well as a list
of _ADR descriptors for each link.
There is a chance that in extreme cases where the BIOS contains too
much information we would need to detect which Slave devices actually
report as 'attached'. This would be more accurate than static
table-based solutions, but it also introduces timing dependencies
since we don't know when those devices might become attached, so will
only be only be looked at if we see limitations with static methods
and the usual quirks based e.g. on DMI information.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These callbacks are invoked when a matching hw_params/hw_free() DAI
operation takes place, and will result in IPC operations with the SOF
firmware.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALH was inserted in the wrong place during integration, add after DMIC
to mirror the file used by SOF firmware.
No functional change, just text move in the same file to better track
changes, if any.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the SoundWire core supports the multi-step initialization,
call the relevant APIs.
The actual hardware enablement can be done in two places, ideally we'd
want to startup the SoundWire IP as soon as possible (while still
taking power rail dependencies into account)
However when suspend/resume is implemented, the DSP device will be
resumed first, and only when the DSP firmware is downloaded/booted
would the SoundWire child devices be resumed, so there are only
marginal benefits in starting the IP earlier for the first probe.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For SoundWire, we need to know if endpoints needs to be 'aggregated'
(MIPI parlance, meaning logically grouped), e.g. when two speaker
amplifiers need to be handled as a single logical output.
We don't necessarily have the information at the firmware (BIOS)
level, so add a notion of endpoints and specify if a device/endpoint
is part of a group, with a position.
This may be expanded in future solutions, for now only provide a group
and position information.
Since we modify the header file, change all existing upstream tables
as well to avoid breaking compilation/bisect.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200325215027.28716-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
이경택