Commit Graph

1223 Commits

Author SHA1 Message Date
Philipp Reisner 753c89130c drbd_req.c: use part_[inc|dec]_in_flight()
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2009-12-03 17:40:51 +01:00
Jens Axboe 220d0b1dbf Merge branch 'master' into for-2.6.33 2009-12-03 13:49:39 +01:00
Peter Horton 0a1f127a05 aoe: prevent cache aliases
Prevent the AoE block driver from creating cache aliases of page cache
pages on machines with virtually indexed caches.

Building kernels on an AT91SAM9G20 board without this patch fails with
segmentation faults after a couple of passes.

Signed-off-by: Peter Horton <zero@colonel-panic.org>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-01 16:32:20 -08:00
Philipp Reisner d8c2a36b77 Fixed a regression in resync decission code drbd_uuid_compare() [Bugz 260]
Since 8.3.3 we fail to do the resync when a partial resynch is not
possible, but a full synch is necessary.

This regression was introduced with 7101539930c0a89146959e7a39c09ad9c3516434

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2009-11-24 18:13:28 +01:00
Lars Ellenberg 0b33a9164a add missing state change on corrupt packet header in drbd_recv_header
Otherwise the 'state fixup' in the receiver will change to Unconnected,
but the receiver will terminate itself, and any attempt at 'down'ing
that drbd later will block forever.

see also Bugz. #259

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2009-11-24 18:12:13 +01:00
Lars Ellenberg 6c6c7951be fix in-kernel configuration serialization
this is uncritical, as we still also serialize in userland,
but to correctly serialize on the CONFIG_PENDING bit,
it must be wait_event(state_wait, \!test_and_set_bit)

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2009-11-24 18:11:05 +01:00
Alex Chiang 32a87c0114 cciss: change Cmd_sg_list.sg_chain_dma type to dma_addr_t
A recent commit broke the ia64 build:

	Author: Don Brace <brace@beardog.cce.hp.com>
	Date:   Thu Nov 12 12:50:01 2009 -0600

	cciss: Add enhanced scatter-gather support.

because of this hunk:

	--- a/drivers/block/cciss.h
	+++ b/drivers/block/cciss.h
	+struct Cmd_sg_list {
	+       SGDescriptor_struct     *sgchain;
	+       dma64_addr_t            sg_chain_dma;
	+       int                     chain_block_size;
	+};

The issue is that dma64_addr_t isn't #define'd on ia64.

The way that we're using Cmd_sg_list.sg_chain_dma is to hold an
address returned from pci_map_single().

	+               temp64.val = pci_map_single(h->pdev,
	+                                 h->cmd_sg_list[c->cmdindex]->sgchain,
	+                                 len, dir);
	+
	+               h->cmd_sg_list[c->cmdindex]->sg_chain_dma = temp64.val;

pci_map_single() returns a dma_addr_t too.

This code will still work even on a 32-bit x86 build, where
dma_addr_t is defined to be a u32 because it will simply be
promoted to the __u64 that temp64.val is defined as.

Thus, declaring Cmd_sg_list.sg_chain_dma as dma_addr_t is safe.

Cc: Don Brace <brace@beardog.cce.hp.com>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-23 09:35:06 +01:00
Stephen M. Cameron d61c42690c cciss: fix scatter gather cleanup problems
On driver unload, only free up the extra scatter gather data if they were
allocated in the first place (the controller supports it) and don't forget
to free up the sg_cmd_list array of pointers.

Signed-off-by: Don Brace <brace@beardog.cce.hp.com>
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-23 09:31:48 +01:00
Alex Chiang 69ac748222 cciss: make device attrs static
No need to export those device attributes.

In fact, without this patch, we can trip over a build error if cciss
is a built-in and another driver also declares and exports attributes
with the same name.

You'll see errors like:

	drivers/scsi/built-in.o: multiple definition of `dev_attr_lunid'
	drivers/block/built-in.o: first defined here

Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Cc: <mike.miller@hp.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-13 08:47:53 +01:00
Stephen M. Cameron 8721c81f64 cciss: Fix weird usage of ENXIO in cciss_scsi.c
cciss: Fix weird usage of ENXIO in cciss_scsi.c

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-13 08:45:54 +01:00
Don Brace 5c07a311a8 cciss: Add enhanced scatter-gather support.
cciss: Add enhanced scatter-gather support.  For controllers which
supported, more than 512 scatter-gather elements per command may
be used, and the max transfer size can be increased to 8192 blocks.

Signed-off-by: Don Brace <brace@beardog.cce.hp.com>
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-13 08:45:54 +01:00
Stephen M. Cameron da0021841c cciss: Do not automatically rescan on UNIT ATTENTION/LUN DATA CHANGED
cciss: Do not automatically rescan on UNIT ATTENTION/LUN DATA CHANGED
There are problems with doing this.  If, say, several logical drives
are deleted at once, several such UNIT ATTENTIONS will be encountered,
often during the rescan triggered by the first such UNIT ATTENTION.
The block layer may be in the midst of trying to add logical drives
which were just deleted (resulting in the subsequent UNIT ATTENTION(s).)
Making the rescan code robust enough to tolerate this kind of thing
is too complicated for the moment.  So, for now, we just don't do it.
Note: This UNIT ATTENTION/LUN DATA CHANGED situation only occurs on
the MSA2012.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-13 08:45:53 +01:00
Stephen M. Cameron d06dfbd236 cciss: Remove unnecessary check in scan_thread
cciss: Remove unnecessary check in scan_thread

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-13 08:45:53 +01:00
Stephen M. Cameron b0e15f6db1 cciss: fix typo that causes scsi status to be lost.
cciss: fix typo that causes scsi status to be lost.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-13 08:45:53 +01:00
Stephen M. Cameron aa43f11147 cciss: remove sendcmd() as it is no longer used.
cciss: remove sendcmd() as it is no longer used.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-13 08:45:53 +01:00
Stephen M. Cameron 29009a036f cciss: clean up code in cciss_shutdown
cciss: clean up code in cciss_shutdown.  Send the flush cache
command down with interrupts still enabled, and do not do DMA
from the stack.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-13 08:45:53 +01:00
Stephen M. Cameron 7b838bde92 cciss: Remove the "withirq" parameter from various functions where possible
cciss:  Remove the "withirq" parameter from various functions where possible

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-13 08:45:53 +01:00
Stephen M. Cameron c08fac6500 cciss: Retry driver initiated cmds with unit attention condition
cciss:  Retry driver initiated cmds with unit attention condition

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-13 08:45:53 +01:00
Stephen M. Cameron fd8489cff4 cciss: Fix problem with remove_from_scan_list on driver unload
cciss: Fix problem with remove_from_scan_list that on driver unload
it doesn't remove the controller from the scan list correctly if
the controller is currently being scanned for new devices.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-13 08:45:53 +01:00
Alex Chiang 8ba95c69fe cciss: Make device attributes static
cciss: Make device attributes static

Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Acked-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-13 08:45:52 +01:00
Jens Axboe 622d32d3ec Merge branch 'for-jens' of git://git.drbd.org/linux-2.6-drbd into for-2.6.33 2009-11-04 18:38:23 +01:00
Lars Ellenberg 83c38830b0 drbd: performance - don't lose unplug events
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2009-11-04 15:21:04 +01:00
Philipp Reisner e656ec8ae2 Do not deadlock in drbd_disconnect() [bugz 258]
When there are many blocks on the fly (ua), and the AL gets into "starving"
mode (random IO, scattered all over the device), and the connections gets
interrupted, the receiver thread deadlocks in the drbd_disconnect() code path.

Affected are only nodes in Primary role.

The bug triggers most likely on system that mirror over "long distances"

Regression introduced shortly before 8.3.3
with git commit 31e0f1250f174ac1ee317f360943a0159e19edc8

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2009-11-04 15:21:03 +01:00
Philipp Reisner 0a49216625 drbdsetup X resume-io should be usable to resume IO [Bugz 256]
When IO gets frozen due to a broken fence-peer script, the user
should be able to thaw IO by the resume-io command.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2009-11-04 15:21:01 +01:00
Lars Ellenberg 1352994b36 drbd: fix check for too large lower level device
To check wether we are truncating a very large device due to limited
meta data space, we need to check the ll_dev size.

Also improve the printk to suggest "flexible" or "internal".

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2009-11-04 15:21:00 +01:00
Lars Ellenberg ad19bf6e54 fix grammar in printk
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2009-11-04 15:20:59 +01:00
Hideyuki Sasaki f21121cde6 block/ps3: fix slow VRAM IO
The current PS3 VRAM driver uses msleep() to wait for completion of RSX
DMA transfers between system memory and VRAM.  Depending on the system
timing, the processing delay and overhead of this msleep() call can
significantly impact VRAM driver IO.

To avoid the condition, add a short duration (200 usec max) udelay()
polling loop before entering the msleep() polling loop.

Signed-off-by: Hideyuki Sasaki <xhide@rd.scei.sony.co.jp>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Jim Paris <jim@jtan.com>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-04 09:09:28 +01:00
Jens Axboe 2058297d2d Merge branch 'for-linus' into for-2.6.33
Conflicts:
	block/cfq-iosched.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-03 21:14:39 +01:00
Alexey Dobriyan cf6e693212 loop: fix NULL dereference if mount fails
Commit bb21488482 ("[PATCH] switch loop")
started to pass NULL bdev to ioctl hook.

Steps to reproduce:

	[boot with loop.max_part=1]
	[mount -o loop something so mount fails]

BUG: unable to handle kernel NULL pointer dereference at 00000000000000b8
IP: [<ffffffff811486ee>] blkdev_ioctl+0x2e/0xa30
PGD 0
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
last sysfs file: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/ACPI0003:00/power_supply/ACAD/online
CPU 0
Modules linked in: zfs nvidia(P) [last unloaded: zfs]
Pid: 15177, comm: mount Tainted: P           2.6.32-rc4-zfs #2 Satellite X200
RIP: 0010:[<ffffffff811486ee>]  [<ffffffff811486ee>] blkdev_ioctl+0x2e/0xa30
RSP: 0018:ffff88003b3d5bb8  EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 000000000000125f RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88003b3d5ce8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 00007ffffffff000
R13: 0000000000000000 R14: ffff880071cef280 R15: 00000000000200da
FS:  00007fd77cfe7740(0000) GS:ffff880001600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000000000b8 CR3: 0000000001001000 CR4: 00000000000026f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process mount (pid: 15177, threadinfo ffff88003b3d4000, task ffff88007572f920)
Stack:
 ffff88003b3d5c38 ffffffff812f95f5 ffff88007eeb6600 0000000000000000
<0> 0000000000000000 ffff88003b3d5c18 ffffffff811547d9 ffff88001bf11ef0
<0> 7fffffffffffffff ffff88001bf11ee8 ffff88001bf11ef0 0000000000000000
Call Trace:
 [<ffffffff812f95f5>] ? schedule_timeout+0x1f5/0x250
 [<ffffffff811547d9>] ? rb_insert_color+0x109/0x140
 [<ffffffff812fb754>] ? _spin_unlock_irq+0x14/0x40
 [<ffffffff812f84c6>] ? wait_for_common+0x66/0x170
 [<ffffffff8105a280>] ? default_wake_function+0x0/0x10
 [<ffffffff810f8258>] ioctl_by_bdev+0x38/0x50
 [<ffffffff811d2481>] loop_clr_fd+0x1e1/0x210
 [<ffffffff811d2522>] lo_release+0x72/0x80
 [<ffffffff810f934c>] __blkdev_put+0x1ac/0x1d0
 [<ffffffff810f937b>] blkdev_put+0xb/0x10
 [<ffffffff810f93b9>] blkdev_close+0x39/0x60
 [<ffffffff810ccef3>] __fput+0xd3/0x230
 [<ffffffff810cd06d>] fput+0x1d/0x30
 [<ffffffff810c9680>] filp_close+0x50/0x80
 [<ffffffff81061f11>] put_files_struct+0x81/0x100
 [<ffffffff81061fde>] exit_files+0x4e/0x60
 [<ffffffff81063ec5>] do_exit+0x6b5/0x730
 [<ffffffff8107b279>] ? up_read+0x9/0x10
 [<ffffffff8104c86e>] ? do_page_fault+0x18e/0x2a0
 [<ffffffff81063f81>] do_group_exit+0x41/0xc0
 [<ffffffff81064012>] sys_exit_group+0x12/0x20
 [<ffffffff81030deb>] system_call_fastpath+0x16/0x1b
Code: f8 48 89 e5 48 81 ec 30 01 00 00 48 89 5d d8 4c 89 6d e8 4c 89 65 e0 4c 89 75 f0 4c 89 7d f8 48 89 bd e8 fe ff ff 49 89 cd 89 f3 <49> 8b 88 b8 00 00 00 81 fa 68 12 00 00 0f 84 57 05 00 00 0f 86
RIP  [<ffffffff811486ee>] blkdev_ioctl+0x2e/0xa30
 RSP <ffff88003b3d5bb8>
CR2: 00000000000000b8
---[ end trace c0b4d3c3118d1427 ]---
Fixing recursive fault but reboot is needed!

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-29 07:39:27 -07:00
Jens Axboe a870a3a485 drbd: fix in_flight rw indexing
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-28 09:30:27 +01:00
Rusty Russell 3225beaba0 virtio_blk: Revert serial number support
This reverts "Add serial number support for virtio_blk, V4a".

Turns out that virtio_pci, lguest and s/390 all have an 8 bit limit
on virtio config space, so noone could ever use this.

This is coming back later in a cleaner form.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: john cooper <john.cooper@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
2009-10-22 16:39:30 +10:30
Christian Borntraeger e95646c3ec virtio: let header files include virtio_ids.h
Rusty,

commit 3ca4f5ca73
    virtio: add virtio IDs file
moved all device IDs into a single file. While the change itself is
a very good one, it can break userspace applications. For example
if a userspace tool wanted to get the ID of virtio_net it used to
include virtio_net.h. This does no longer work, since virtio_net.h
does not include virtio_ids.h.
This patch moves all "#include <linux/virtio_ids.h>" from the C
files into the header files, making the header files compatible with
the old ones.

In addition, this patch exports virtio_ids.h to userspace.

CC: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-10-22 16:39:28 +10:30
Christoph Hellwig f8b12e513b virtio_blk: revert QUEUE_FLAG_VIRT addition
It seems like the addition of QUEUE_FLAG_VIRT caueses major performance
regressions for Fedora users:

	https://bugzilla.redhat.com/show_bug.cgi?id=509383
	https://bugzilla.redhat.com/show_bug.cgi?id=505695

while I can't reproduce those extreme regressions myself I think the flag
is wrong.

Rationale:

  QUEUE_FLAG_VIRT expands to QUEUE_FLAG_NONROT which casus the queue
  unplugged immediately.  This is not a good behaviour for at least
  qemu and kvm where we do have significant overhead for every
  I/O operations.  Even with all the latested speeups (native AIO,
  MSI support, zero copy) we can only get native speed for up to 128kb
  I/O requests we already are down to 66% of native performance for 4kb
  requests even on my laptop running the Intel X25-M SSD for which the
  QUEUE_FLAG_NONROT was designed.
  If we ever get virtio-blk overhead low enough that this flag makes
  sense it should only be set based on a feature flag set by the host.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-10-22 16:39:26 +10:30
Jens Axboe c30f33437c Merge branch 'for-linus' into for-2.6.33 2009-10-13 12:29:45 +02:00
Stephen M. Cameron 2ec24ff1d1 cciss: Add cciss_allow_hpsa module parameter
Add cciss_allow_hpsa module parameter.  This parameter causes
the cciss driver to ignore any Smart Array devices known to be
supported by the hpsa driver.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-13 09:18:22 +02:00
Stephen M. Cameron 2cfa948c9e cciss: Fix multiple calls to pci_release_regions
Fix multiple calls to pci_release_regions.  If cciss_pci_init
fails, it already does any necessary call to pci_release_regions,
so this does not need to be done again in cciss_init_one in that
case.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-13 09:18:22 +02:00
Randy Dunlap 132cc538cd drbd: needs __ratelimit()
drbd_int.h uses __ratelimit(), so it needs to #include ratelimit.h:

drivers/block/drbd/drbd_int.h:1765: error: implicit declaration of function '__ratelimit'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: drbd-dev@lists.linbit.com
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-07 19:26:00 +02:00
Philipp Reisner 9f5180e5c3 drbd: Work on permission enforcement
Now we have the capabilities of the sending process available,
use them to enforce CAP_SYS_ADMIN.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-06 09:30:14 +02:00
Jens Axboe 25d2d4edfa drbd: fixup for reverted dual in_flight patch
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-05 09:31:59 +02:00
Jens Axboe 5d13379a4d Merge branch 'master' into for-2.6.33 2009-10-05 09:30:10 +02:00
Linus Torvalds 58e57fbd1c Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: (41 commits)
  Revert "Seperate read and write statistics of in_flight requests"
  cfq-iosched: don't delay async queue if it hasn't dispatched at all
  block: Topology ioctls
  cfq-iosched: use assigned slice sync value, not default
  cfq-iosched: rename 'desktop' sysfs entry to 'low_latency'
  cfq-iosched: implement slower async initiate and queue ramp up
  cfq-iosched: delay async IO dispatch, if sync IO was just done
  cfq-iosched: add a knob for desktop interactiveness
  Add a tracepoint for block request remapping
  block: allow large discard requests
  block: use normal I/O path for discard requests
  swapfile: avoid NULL pointer dereference in swapon when s_bdev is NULL
  fs/bio.c: move EXPORT* macros to line after function
  Add missing blk_trace_remove_sysfs to be in pair with blk_trace_init_sysfs
  cciss: fix build when !PROC_FS
  block: Do not clamp max_hw_sectors for stacking devices
  block: Set max_sectors correctly for stacking devices
  cciss: cciss_host_attr_groups should be const
  cciss: Dynamically allocate the drive_info_struct for each logical drive.
  cciss: Add usage_count attribute to each logical drive in /sys
  ...
2009-10-04 12:39:14 -07:00
Alexey Dobriyan 828c09509b const: constify remaining file_operations
[akpm@linux-foundation.org: fix KVM]
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01 16:11:11 -07:00
Jens Axboe 6a0afdf58d drbd: remove tracing bits
They should be reimplemented in the current scheme.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-01 21:17:58 +02:00
Lars Ellenberg ab8fafc2e1 dropping unneeded include autoconf.h
It is force-included on the gcc command line since at least 2.6.15.
Explicit include lines seem to break compilation now in certain configurations.

Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
2009-10-01 21:17:54 +02:00
Philipp Reisner b411b3637f The DRBD driver
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2009-10-01 21:17:49 +02:00
Alexander Beregalov 1e6f2dc119 cciss: fix build when !PROC_FS
Fix these build errors when CONFIG_PROC_FS is not set:
drivers/block/cciss.c: In function 'cciss_show_raid_level':
drivers/block/cciss.c:623: error: 'RAID_UNKNOWN' undeclared (first use in this function)
drivers/block/cciss.c:626: error: 'raid_label' undeclared (first use in this function)
drivers/block/cciss.c: In function 'cciss_geometry_inquiry':
drivers/block/cciss.c:2696: error: 'RAID_UNKNOWN' undeclared (first use in this function)

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-01 21:15:45 +02:00
Jens Axboe 9f792d9f58 cciss: cciss_host_attr_groups should be const
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-01 21:15:45 +02:00
Stephen M. Cameron 9cef0d2f4f cciss: Dynamically allocate the drive_info_struct for each logical drive.
cciss: Dynamically allocate the drive_info_struct for each logical drive.
This reduces the size of the per-hba ctlr_info structure from 106936
bytes to 8132 bytes.  That's on 32-bit systems.  On 64-bit systems, the
improvement is even bigger.  Without this, the ctlr_info struct is so big
that the driver won't even load on a 64 bit system if CISS_MAX_LUN was
at it's current setting of 1024 logical drives.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-01 21:15:45 +02:00
Stephen M. Cameron e272afecaf cciss: Add usage_count attribute to each logical drive in /sys
Add usage_count attribute to each logical drive at
/sys/devices/<dev>/ccissX/cXdY/usage_count for controller X,
logical drive Y.  The usage count is the number of times
the device has currently been opened.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-01 21:15:44 +02:00
Stephen M. Cameron 3ff1111dc6 cciss: Add a "raid_level" attribute to each logical drive in /sys
and change get rid of some magic numbers in raid lavel decoding.

Add raid_level attribute to each logical drive at
/sys/devices/<dev>/ccissX/cXdY/raid_level for controller X,
logical drive Y

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-10-01 21:15:44 +02:00