Commit Graph

38 Commits

Author SHA1 Message Date
Amit Kumar Salecha 36a1898ddf qlcnic: fix loopback test
o Loopback not supported for virtual function.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-25 16:32:40 -07:00
Rajesh Borundia 9963a8bde6 qlcnic: fix bandwidth check
Fix maximum and minmum bandwith value.

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-24 20:42:18 -07:00
Anirban Chakraborty cea8975e84 qlcnic: restore NPAR config data after recovery
o NPAR configuration which is programmed in fw, need to
  restore after fw recovery.
o Update version to 5.0.7

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-14 13:54:17 -07:00
Sucheta Chakraborty 451724c821 qlcnic: aer support
Pci error recovery support added.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-14 13:54:17 -07:00
Anirban Chakraborty ac8d0c4feb qlcnic: Check FW capability for TSO
Driver checks TSO capability from FW before enabling it.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-09 17:41:57 -07:00
Rajesh K Borundia 346fe763d7 qlcnic: Add support for configuring eswitch and npars
Following changes are made:
1.Obtain capabilities of Nic partition.
2.Configure tx bandwidth of particular Nic partition.
3.Configure the eswitch for setting port mirroring, enable mac
learning, promiscous mode.

Signed-off-by: Rajesh K Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-29 15:12:36 -07:00
Amit Kumar Salecha 4eaef482df qlcnic: update version to 5.0.6
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23 13:16:32 -07:00
Amit Kumar Salecha d626ad4d84 qlcnic: mark context state freed after destroy
After destroying recv ctx, context state remain same.
Fix it by marking as FREED.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23 13:16:31 -07:00
Amit Kumar Salecha 68bf1c68a4 qlcnic: offload tx timeout recovery
Offload tx timeout recovery to fw recovery func(check_health).
In check_health, first check health of device, if it its ok, then
do tx timeout recovery otherwise device recovery.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23 13:16:31 -07:00
Amit Kumar Salecha 8a15ad1fb1 qlcnic: release device resources during interface down
Previously we were allocating device resources during probe and
release them during remove.
Now alloc during interface up and release in interface down.
This helps in device performance, as it doesn't need to keep
track of inactive resources.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23 13:16:30 -07:00
Amit Kumar Salecha 900c6cfffa qlcnic: handshake with card after fw load
Instead of delaying rcv handshake till interface comes up,
do it just after fw load.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23 13:16:29 -07:00
Amit Kumar Salecha 9665982885 qlcnic: cleanup skb allocation
No need to maintian separate state for alloced and freed skb.
This can be done by null check.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23 13:16:28 -07:00
Rajesh K Borundia ef71ff833a qlcnic: fix race in tx stop queue
There is a race between netif_stop_queue and netif_stopped_queue
check. So check once again if buffers are available to avoid race.
With above logic we can also get rid of tx lock in process_cmd_ring.

Signed-off-by: Rajesh K Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-17 08:57:56 -07:00
schacko 8f891387aa qlcnic: seperate interrupt for TX
Earlier all poll routine can process rx and tx, But now
one poll routine to process rx + tx and other for rx only.
Last msix vector will be used for separate tx interrupt.

o This is supported from fw version 4.4.2.
o Bump version 5.0.5

Signed-off-by: Sony Chacko <schacko@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-17 08:57:55 -07:00
Anirban Chakraborty 434d7b380f qlcnic: Bumped up version number
Changed the driver version number to 5.0.4

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-16 14:45:51 -07:00
Anirban Chakraborty 0e33c6649e qlcnic: Fix a bug in setting up NIC partitioning mode
The driver was not detecting the presence of NIC partitioning capability of the
firmware properly. Now, it checks the eswitch set bit in the FW capabilities
register and accordingly sets the driver mode as NPAR capable or not.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-16 14:45:51 -07:00
Anirban Chakraborty 9f26f547a5 qlcnic: NIC Partitioning - Add non privileged mode support
Added support for NIC functions that work in non privileged mode where these
functions are privileged to do IO only, the control operations are handled via
privileged functions.
Bumped up version number to 5.0.3.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 02:24:03 -07:00
Anirban Chakraborty 2e9d722db6 qlcnic: NIC Partitioning - Add basic infrastructure support
Following changes have been added to enable the adapter to work in
NIC partitioning mode where multiple PCI functions of an adapter port can
be configured to work as NIC functions. The first function that is enumerated on
the PCI bus assumes the role of management function which, besides being able
to do all the NIC functionality, can configure other NIC partitions. Other NIC
functions can be configured as privileged or non privileged functions.
Privileged function can not configure other NIC functions but can do all the
NIC functionality including any firmware initialization, chip reset etc. Non
privileged functions can do only basic IO. For chip reset etc, it depends on the
privilege or management function.

1. Added code to determine PCI function number independent of kernel API.
2. Added Driver - FW version 2.0 support.
3. Changed producer and consumer register offset calculation.
4. Added management and privileged operation modes for npar functions. A module
 parameter has been added to control it.
5. Added support for configuring the eswitch in the adapter.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02 02:24:03 -07:00
Amit Kumar Salecha 20c67bd40e qlcnic: remove unused register
Removing register defines which are not used by Qlgoic CNA device.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17 17:30:55 -07:00
Sucheta Chakraborty 6df900e96c qlcnic: add idc debug registers
When ever driver changes the device state, it should write
pci-func number and timestamp in debug registers.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-14 03:08:02 -07:00
Sucheta Chakraborty b3a2464941 qlcnic: check device class
pci-func class can be other than ethernet in Qlogic CNA device.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-14 03:08:01 -07:00
Sucheta Chakraborty 96f8118c25 qlcnic: check IDC version
Warn user if IDC version mismatch with different class of drivers.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-14 03:08:00 -07:00
Amit Kumar Salecha 251a84c927 qlcnic: cleanup unused code
LRO ring, cut-thru mode and specific fw version are not
valid to Qlogic CNA device.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-14 03:08:00 -07:00
Amit Kumar Salecha 1bb09fb9c9 qlcnic: cleanup dma mask setting
Device support 64 bit dma mask.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-14 03:07:46 -07:00
Amit Kumar Salecha 6edae7a484 qlcnic: fix caching window register
o Window register is not per pci-func, so caching can
result in expected result.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-14 03:06:54 -07:00
Amit Kumar Salecha 927b1375f9 qlcnic: update version 5.0.2
Update version to indicate IDC(fw recovery) changes.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22 15:28:32 -07:00
Amit Kumar Salecha 8ae6df978b qlcnic: additional driver statistics
Added additional driver statistics to track errors in rcv/tx path.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22 15:28:26 -07:00
Amit Kumar Salecha 9fc4178b14 qlcnic: update version to 5.0.1
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03 14:19:16 -07:00
Amit Kumar Salecha 65b5b420b5 qlcnic: add driver debug support
Add debug print in driver, can be tuned by ethtool msg level
callback.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03 14:19:15 -07:00
Sucheta Chakraborty aa5e18c04a qlcnic: use IDC defined timeout value
o USE/Read IDC defined timeout value from ROM.
o While resetting chip, don't wait for other pci-func to respond,
  more than reset_ack_timeo seconds,

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03 14:19:14 -07:00
Dhananjay Phadke 897e8c7c45 qlcnic: handle queue manager access
Check the access by tools for hardware queue engine and handle it
separately than other block registers, otherwise incorrect data
is returned.

Signed-off-by: Dhananjay Phadke <dhananjay.phadke@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-03 14:19:13 -07:00
Amit Kumar Salecha 1515faf2f9 qlcnic: remove extra space from board names
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08 10:45:30 -08:00
Sucheta Chakraborty 8bfe8b91b8 qlcnic: additional driver statistics.
Statistics added for lro/lso bytes, count for tx stop queue and
wake queue and skb alloc failure count.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08 10:45:29 -08:00
Amit Kumar Salecha cdaff1854f qlcnic: add loopback diagnostic test
Loopback test (offline) added in ethtool self test.
o Set device in loopback mode
o Send packets
o Process receive packets in qlcnic_process_rcv_ring_diag()
o Compare packets
o Reset device in normal mode.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02 15:55:46 -08:00
Amit Kumar Salecha 7eb9855d68 qlcnic: add interrupt diagnostic test
Interrupt test (offline) added in ethtool self test.
Register a temporary interrupt handler and then send command to fw
to raise an interrupt.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02 15:55:46 -08:00
Sucheta Chakraborty 897d3596e0 qlcnic: support LED blink for device identification
Added support of device identification by blinking LED for specified time.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02 15:55:45 -08:00
Amit Kumar Salecha 02420be6fc qlcnic: add ethernet identifier in board info
Added missing identifier that distinguishes between
FCOE/ISCSI/ETHERNET functions.

Signed-off-by: Rajesh K Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02 15:55:44 -08:00
Amit Kumar Salecha af19b49152 qlcnic: Qlogic ethernet driver for CNA devices
o 1G/10G Ethernet Driver for Qlgic QLE8240 and QLE8242 CNA devices.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-16 01:17:15 -08:00