Commit Graph

272 Commits

Author SHA1 Message Date
Geert Uytterhoeven 60d48c1e67 m68k,m68knommu: Wire up name_to_handle_at, open_by_handle_at, clock_adjtime, syncfs
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-12 19:02:03 -07:00
Lucas De Marchi 25985edced Fix common misspellings
Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 11:26:23 -03:00
FUJITA Tomonori 8547727756 remove dma64_addr_t
There is no user now.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: David Miller <davem@davemloft.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:47:18 -07:00
Akinobu Mita 61f2e7b0f4 bitops: remove minix bitops from asm/bitops.h
minix bit operations are only used by minix filesystem and useless by
other modules.  Because byte order of inode and block bitmaps is different
on each architecture like below:

m68k:
	big-endian 16bit indexed bitmaps

h8300, microblaze, s390, sparc, m68knommu:
	big-endian 32 or 64bit indexed bitmaps

m32r, mips, sh, xtensa:
	big-endian 32 or 64bit indexed bitmaps for big-endian mode
	little-endian bitmaps for little-endian mode

Others:
	little-endian bitmaps

In order to move minix bit operations from asm/bitops.h to architecture
independent code in minix filesystem, this provides two config options.

CONFIG_MINIX_FS_BIG_ENDIAN_16BIT_INDEXED is only selected by m68k.
CONFIG_MINIX_FS_NATIVE_ENDIAN is selected by the architectures which use
native byte order bitmaps (h8300, microblaze, s390, sparc, m68knommu,
m32r, mips, sh, xtensa).  The architectures which always use little-endian
bitmaps do not select these options.

Finally, we can remove minix bit operations from asm/bitops.h for all
architectures.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Michal Simek <monstr@monstr.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:46:22 -07:00
Akinobu Mita 3fca5af786 m68k: remove inline asm from minix_find_first_zero_bit
As a preparation for moving minix bit operations from asm/bitops.h to
architecture independent code in minix filesystem, this removes inline asm
from minix_find_first_zero_bit() for m68k.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:46:21 -07:00
Akinobu Mita f312eff816 bitops: remove ext2 non-atomic bitops from asm/bitops.h
As the result of conversions, there are no users of ext2 non-atomic bit
operations except for ext2 filesystem itself.  Now we can put them into
architecture independent code in ext2 filesystem, and remove from
asm/bitops.h for all architectures.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:46:21 -07:00
Akinobu Mita c1e6ca7a50 m68knommu: introduce little-endian bitops
Introduce little-endian bit operations by renaming native ext2 bit
operations.  The ext2 bit operations are kept as wrapper macros using
little-endian bit operations to maintain bisectability until the
conversions are finished.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:46:14 -07:00
Akinobu Mita 3f5527fe7e m68k: introduce little-endian bitops
Introduce little-endian bit operations by renaming native ext2 bit
operations and changing find_*_bit_le() to take a "void *".  The ext2 bit
operations are kept as wrapper macros using little-endian bit operations
to maintain bisectability until the conversions are finished.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:46:13 -07:00
Akinobu Mita c4945b9ed4 asm-generic: rename generic little-endian bitops functions
As a preparation for providing little-endian bitops for all architectures,
This renames generic implementation of little-endian bitops.  (remove
"generic_" prefix and postfix "_le")

s/generic_find_next_le_bit/find_next_bit_le/
s/generic_find_next_zero_le_bit/find_next_zero_bit_le/
s/generic_find_first_zero_le_bit/find_first_zero_bit_le/
s/generic___test_and_set_le_bit/__test_and_set_bit_le/
s/generic___test_and_clear_le_bit/__test_and_clear_bit_le/
s/generic_test_le_bit/test_bit_le/
s/generic___set_le_bit/__set_bit_le/
s/generic___clear_le_bit/__clear_bit_le/
s/generic_test_and_set_le_bit/test_and_set_bit_le/
s/generic_test_and_clear_le_bit/test_and_clear_bit_le/

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23 19:46:11 -07:00
FUJITA Tomonori 3e50594e8e add the common dma_addr_t typedef to include/linux/types.h
All architectures can use the common dma_addr_t typedef now. We can
remove the arch specific dma_addr_t.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Matt Turner <mattst88@gmail.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:09 -07:00
Linus Torvalds dc113c1f1d Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k/block: amiflop - Remove superfluous amiga_chip_alloc() cast
  m68k/atari: ARAnyM - Add support for network access
  m68k/atari: ARAnyM - Add support for console access
  m68k/atari: ARAnyM - Add support for block access
  m68k/atari: Initial ARAnyM support
  m68k: Kconfig - Remove unneeded "default n"
  m68k: Makefiles - Change to new flags variables
  m68k/amiga: Reclaim Chip RAM for PPC exception handlers
  m68k: Allow all kernel traps to be handled via exception fixups
  m68k: Use base_trap_init() to initialize vectors
  m68k: Add helper function handle_kernel_fault()
2011-03-16 19:08:03 -07:00
Petr Stehlik 65cd577d5e m68k/atari: Initial ARAnyM support
Add improved support for running under the ARAnyM emulator
(Atari Running on Any Machine - http://aranym.org/).

[michael, geert: Cleanups and updates]

Signed-off-by: Petr Stehlik <pstehlik@sophics.cz>
Signed-off-by: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-03-16 19:10:41 +01:00
Roman Zippel dcdf3a2935 m68k: Add helper function handle_kernel_fault()
Add helper function handle_kernel_fault() in signal.c, so frame_extra_sizes
can become static, and to avoid future code duplication.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-03-16 19:10:40 +01:00
Greg Ungerer 47e0c7e128 m68knommu: external interrupt support to ColdFire intc-simr controller
The EDGE Port module of some ColdFire parts using the intc-simr interrupt
controller provides support for 7 external interrupts. These interrupts
go off-chip (that is they are not for internal peripherals). They need
some special handling and have some extra setup registers. Add code to
support them.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-15 21:01:57 +10:00
Greg Ungerer 57b481436f m68knommu: external interrupt support to ColdFire intc-2 controller
The EDGE Port module of some ColdFire parts using the intc-2 interrupt
controller provides support for 7 external interrupts. These interrupts
go off-chip (that is they are not for internal peripherals). They need
some special handling and have some extra setup registers. Add code to
support them.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-15 21:01:57 +10:00
Greg Ungerer ce3de78a1c m68knommu: remove ColdFire CLOCK_DIV config option
The reality is that you do not need the abiltity to configure the
clock divider for ColdFire CPUs. It is a fixed ratio on any given
ColdFire family member. It is not the same for all ColdFire parts,
but it is always the same in a model range. So hard define the divider
for each supported ColdFire CPU type and remove the Kconfig option.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-15 21:01:57 +10:00
Greg Ungerer d4852a34e4 m68knommu: make ColdFire internal peripheral region configurable
Most ColdFire CPUs have an internal peripheral set that can be mapped at
a user selectable address. Different ColdFire parts either use an MBAR
register of an IPSBAR register to map the peripheral region. Most boards
use the Freescale default mappings - but not all.

Make the setting of the MBAR or IPSBAR register configurable. And only make
the selection available on the appropriate ColdFire CPU types.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-15 21:01:55 +10:00
Greg Ungerer b195c47924 m68knommu: clean up definitions of ColdFire peripheral base registers
Different ColdFire CPUs have different ways of defining where their
internal peripheral registers sit in their address space. Some use an
MBAR register, some use and IPSBAR register, some have a fixed mapping.

Now that most of the peripheral address definitions have been cleaned up
we can clean up the setting of the MBAR and IPSBAR defines to limit them
to just where they are needed (and where they actually exist).

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-15 21:01:55 +10:00
Greg Ungerer 6a92e1982d m68knommu: clean up use of MBAR for DRAM registers on ColdFire start
In some of the RAM size autodetection code on ColdFire CPU startup
we reference DRAM registers relative to the MBAR register. Not all of
the supported ColdFire CPUs have an MBAR, and currently this works
because we fake an MBAR address on those registers. In an effort to
clean this up, and eventually remove the fake MBAR setting make the
DRAM register address definitions actually contain the MBAR (or IPSBAR
as appropriate) value as required.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-15 21:01:55 +10:00
Greg Ungerer 58f0ac98f3 m68knommu: remove use of MBAR in old-style ColdFire timer
Not all ColdFire CPUs that use the old style timer hardware module use
an MBAR set peripheral region. Move the TIMER base address defines to the
per-CPU header files where we can set it correctly based on how the
peripherals are mapped - instead of using a fake MBAR for some platforms.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-15 21:01:54 +10:00
Greg Ungerer babc08b7e9 m68knommu: move ColdFire DMA register addresses to per-cpu headers
The base addresses of the ColdFire DMA unit registers belong with
all the other address definitions in the per-cpu headers. The current
definitions assume they are relative to an MBAR register. Not all
ColdFire CPUs have an MBAR register. A clean address define can only
be acheived in the per-cpu headers along with all the other chips
peripheral base addresses.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-15 21:01:54 +10:00
Greg Ungerer a0ba4332a2 m68knommu: remove use of MBAR value for ColdFire 528x peripheral addressing
The ColdFire 528x family of CPUs does not have an MBAR register, so don't
define its peripheral addresses relative to one. Its internal peripherals
are relative to the IPSBAR register, so make sure to use that.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-15 21:01:54 +10:00
Greg Ungerer 9a6b0c73af m68knommu: remove use of MBAR value for ColdFire 527x peripheral addressing
The ColdFire 527x family of CPUs does not have an MBAR register, so don't
define its peripheral addresses relative to one. Its internal peripherals
are relative to the IPSBAR register, so make sure to use that.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-15 21:01:54 +10:00
Greg Ungerer b62384afdd m68knommu: remove use of MBAR value for ColdFire 523x peripheral addressing
The ColdFire 523x family of CPUs does not have an MBAR register, so don't
define its peripheral addresses relative to one. Its internal peripherals
are relative to the IPSBAR register, so make sure to use that.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-15 21:01:54 +10:00
Greg Ungerer 571f0608e1 m68knommu: remove MBAR and IPSBAR hacks for the ColdFire 520x CPUs
The ColdFire 5207 and 5208 CPUs have fixed peripheral addresses.
They do not use the setable peripheral address registers like the MBAR
and IPSBAR used on many other ColdFire parts. Don't use fake values
of MBAR and IPSBAR when using peripheral addresses for them, there
is no need to.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-15 21:01:54 +10:00
Greg Ungerer f317c71a2f m68knommu: move ColdFire PIT timer base addresses
The PIT hardware timer module used in some ColdFire CPU's is not always
addressed relative to an IPSBAR register. Parts like the ColdFire 5207 and
5208 have fixed peripheral addresses. So lets not define the register
addresses of the PIT relative to an IPSBAR definition. Move the base
address definitions into the per-part headers. This is a lot more consistent
since all the other peripheral base addresses are defined in the per-part
header files already.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-15 21:01:54 +10:00
Greg Ungerer cdfc243e7d m68knommu: remove bogus definition of MBAR for ColdFire 532x family
Remove the bogus definition of the MBAR register for the ColdFire 532x
family. It doesn't have an MBAR register, its peripheral registers are
at fixed addresses and are not relative to a settable base.

All the code that relyed on this definition existing has been cleaned
up. The register address definitions now include the base as required.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-15 21:01:53 +10:00
Greg Ungerer 254eef7464 m68knommu: remove kludge seting of MCF_IPSBAR for ColdFire 54xx
The ColdFire 54xx family shares the same interrupt controller used
on the 523x, 527x and 528x ColdFire parts, but it isn't offset
relative to the IPSBAR register. The 54xx doesn't have an IPSBAR
register.

By including the base address of the peripheral registers in the register
definitions (MCFICM_INTC0 and MCFICM_INTC1 in this case) we can avoid
having to define a fake IPSBAR for the 54xx. And this makes the register
address definitions of these more consistent, the majority of the other
register address defines include the peripheral base address already.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-15 21:01:53 +10:00
Greg Ungerer f2ba710d17 m68knommu: move ColdFire 5249 MBAR2 definition
The MBAR2 register is only used on the ColdFire 5249 part, so move its
definition out of the common coldfire.h and into the 5249 support header.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-15 21:01:53 +10:00
Greg Ungerer 982cd252ca m68knommu: add optimize memmove() function
Add an m68k/coldfire optimized memmove() function for the m68knommu arch.
This is the same function as used by m68k. Simple speed tests show this
is faster once buffers are larger than 4 bytes, and significantly faster
on much larger buffers (4 times faster above about 100 bytes).

This also goes part of the way to fixing a regression caused by commit
ea61bc461d ("m68k/m68knommu: merge MMU and
non-MMU string.h"), which breaks non-coldfire non-mmu builds (which is
the 68x328 and 68360 families). They currently have no memmove() fucntion
defined, since there was none in the m68knommu/lib functions.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-02-16 09:43:16 +10:00
Greg Ungerer f9d693d237 m68k: remove arch specific non-optimized memcmp()
The m68k arch implements its own memcmp() function. It is not optimized
in any way (it is the most strait forward coding of memcmp you can get).
Remove it and use the kernels standard memcmp() implementation.

This also goes part of the way to fixing a regression caused by commit
ea61bc461d ("m68k/m68knommu: merge MMU and
non-MMU string.h"), which breaks non-coldfire non-mmu builds (which is
the 68x328 and 68360 families). They currently have no memcmp() function
defined, since there is none in the m68knommu/lib functions.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-02-16 09:42:24 +10:00
Geert Uytterhoeven de339e4b79 m68k/atari: Rename "scc" to "atari_scc"
It's a way too generic name for a global #define and conflicts with a variable
with the same name, causing build errors like:

| drivers/staging/brcm80211/brcmfmac/../util/siutils.c: In function ‘_si_clkctl_cc’:
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1364: error: expected identifier or ‘(’ before ‘volatile’
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1364: error: expected ‘)’ before ‘(’ token
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1421: error: incompatible types in assignment
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1422: error: invalid operands to binary &
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1423: error: invalid operands to binary &
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1424: error: invalid operands to binary |
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: incompatible type for argument 4 of ‘bcmsdh_reg_write’
| drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1428: error: invalid operands to binary &
| make[8]: *** [drivers/staging/brcm80211/brcmfmac/../util/siutils.o] Error 1

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-23 11:24:35 +01:00
Geert Uytterhoeven f9b07897c6 m68k: Uninline strchr()
Some versions of gcc replace calls to strstr() with single-character
"needle" string parameters by calls to strchr() behind our back.

If strchr() is defined as an inline function, this causes linking errors
like

	ERROR: "strchr" [drivers/target/target_core_mod.ko] undefined!

As m68k is the only architecture that has an inline strchr() and this
inline version is not an optimized asm version, uninline strchr() and use
the standard out-of-line C version in lib/string.c instead.

This also decreases the defconfig/allmodconfig kernel image sizes by a few
hundred bytes.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-22 19:32:54 +01:00
Linus Torvalds 6a7f6ec951 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (25 commits)
  m68knommu: fix broken setting of irq_chip and handler
  m68knommu: switch to using -mcpu= flags for ColdFire targets
  m68knommu: arch/m68knommu/Kconfig whitespace cleanup
  m68knommu: create optimal separate instruction and data cache for ColdFire
  m68knommu: support ColdFire caches that do copyback and write-through
  m68knommu: support version 2 ColdFire split cache
  m68knommu: make cache push code ColdFire generic
  m68knommu: clean up ColdFire cache control code
  m68knommu: move inclusion of ColdFire v4 cache registers
  m68knommu: merge bit definitions for version 3 ColdFire cache controller
  m68knommu: create bit definitions for the version 2 ColdFire cache controller
  m68knommu: remove empty __iounmap() it is no used
  m68knommu: remove kernel_map() code, it is not used
  m68knommu: remove do_page_fault(), it is not used
  m68knommu: use user stack pointer hardware on some ColdFire cores
  m68knommu: remove command line printing DEBUG
  m68knommu: remove fasthandler interrupt code
  m68knommu: move UART addressing to part specific includes
  m68knommu: fix clock rate value reported for ColdFire 54xx parts
  m68knommu: move ColdFire CPU names into their headers
  ...
2011-01-18 08:05:20 -08:00
Philippe De Muyter 88cce42762 watchdog: Add MCF548x watchdog driver.
Add watchdog driver for MCF548x.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2011-01-12 13:51:35 +00:00
Al Viro 710e91e455 m68knommu: Switch to saner sigsuspend
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07 14:06:59 +01:00
Al Viro e68847fee7 m68k: Switch to saner sigsuspend()
and saner do_signal() arguments, while we are at it

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-01-07 14:01:33 +01:00
Geert Uytterhoeven 0eefed84fe m68k/sun3: Kill pte_unmap() warnings
Since commit 31c911329e ("mm: check the argument
of kunmap on architectures without highmem"), we get lots of warnings like

arch/m68k/kernel/sys_m68k.c:508: warning: passing argument 1 of ‘kunmap’ from incompatible pointer type

As m68k doesn't support highmem anyway, open code the calls to kmap() and
kunmap() (the latter is a no-op) to kill the warnings, like is done on most
other architectures without CONFIG_HIGHPTE.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Sam Creasey <sammy@sammy.net>
2011-01-05 21:17:19 +01:00
Greg Ungerer 07ffee59a7 m68knommu: create optimal separate instruction and data cache for ColdFire
Create separate functions to deal with instruction and data cache flushing.
This way we can optimize them for the vairous cache types and arrangements
used across the ColdFire family.

For example the unified caches in the version 3 cores means we don't
need to flush the instruction cache. For the version 2 cores that do
not do data cacheing (or where we choose instruction cache only) we
don't need to do any data flushing.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05 15:19:20 +10:00
Greg Ungerer 4a5bae4165 m68knommu: support ColdFire caches that do copyback and write-through
The version 3 and version 4 ColdFire cache controllers support both
write-through and copy-back modes on the data cache. Allow for Kconfig
time configuration of this, and set the cache mode appropriately.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05 15:19:20 +10:00
Greg Ungerer 0ef6c9b8f7 m68knommu: support version 2 ColdFire split cache
The newer version 2 ColdFire CPU cores support a configurable cache
arrangement. The cache memory can be used as all instruction cache, all
data cache, or split in half for both instruction and data caching.
Support this setup via a Kconfig time menu that allows a kernel builder
to choose the arrangement they want to use.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05 15:19:20 +10:00
Greg Ungerer d475e3e473 m68knommu: make cache push code ColdFire generic
Currently the code to push cache lines is only available to version 4
cores. Version 3 cores may also need to use this if we support copy-
back caches on them. Move this code to make it more generic, and
useful for all version ColdFire cores.

With this in place we can now have a single cache_flush_all() code
path that does all the right things on all version cores.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05 15:19:19 +10:00
Greg Ungerer 8ce877a8eb m68knommu: clean up ColdFire cache control code
The cache control code for the ColdFire CPU's is a big ugly mess
of "#ifdef"ery liberally coated with bit constants. Clean it up.

The cache controllers in the various ColdFire parts are actually quite
similar. Just differing in some bit flags and options supported. Using
the header defines now in place it is pretty easy to factor out the
small differences and use common setup and flush/invalidate code.

I have preserved the cache setups as they where in the old code
(except where obviously wrong - like in the case of the 5249). Following
from this it should be easy now to extend the possible setups used on
the CACHE controllers that support split cacheing or copy-back or
write through options.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05 15:19:18 +10:00
Greg Ungerer 3d461401eb m68knommu: move inclusion of ColdFire v4 cache registers
Move the inclusion of the version 4 cache controller registers so that
it is with all the other register bit flag definitions. This makes it
consistent with the other version core inclusion points, and means we
don't need "#ifdef"ery in odd-ball places for these definitions.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05 15:19:18 +10:00
Greg Ungerer 278c2cbd59 m68knommu: merge bit definitions for version 3 ColdFire cache controller
All version 3 based ColdFire CPU cores have a similar cache controller.
Merge all the exitsing definitions into a single file, and make them
similar in style and naming to the existing version 2 and version 4
cache controller definitions.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05 15:19:18 +10:00
Greg Ungerer a12cf0a8c6 m68knommu: create bit definitions for the version 2 ColdFire cache controller
The version 2 ColdFire CPU based cores all contain a similar cache
controller unit. Create a set of bit flag definitions for the supporting
registers.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05 15:19:18 +10:00
Greg Ungerer 63e83c8a52 m68knommu: remove empty __iounmap() it is no used
The empty __iounmap() function is not used on m68knommu at all.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05 15:19:18 +10:00
Greg Ungerer 1c83af5f9d m68knommu: use user stack pointer hardware on some ColdFire cores
The more modern ColdFire parts (even if based on older version cores)
have separate user and supervisor stack pointers (a7 register).
Modify the ColdFire CPU setup and exception code to enable and use
this on parts that have it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05 15:19:18 +10:00
Greg Ungerer 57015421d3 m68knommu: move UART addressing to part specific includes
The ColdFire UART base addresses varies between the different ColdFire
family members. Instead of keeping the base addresses with the UART
definitions keep them with the other addresses definitions for each
ColdFire part.

The motivation for this move is so that when we add new ColdFire
part definitions, they are all in a single file (and we shouldn't
normally need to modify the UART definitions in mcfuart.h at all).

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05 15:19:17 +10:00
Greg Ungerer 733f31b764 m68knommu: fix clock rate value reported for ColdFire 54xx parts
The instruction timings of the ColdFire 54xx family parts are
different to other version 4 parts (or version 2 or 3 parts for
that matter too).

Move the instruction timing setting into the ColdFire part
specific headers, and set the 54xx value appropriately.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-01-05 15:19:17 +10:00