snd_soc_limit_volume() is finding snd_kcontrol by using original coding,
but we already have snd_soc_card_get_kcontrol().
Let's use existing function.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y2y3afgd.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
card->rtd_num is used to count rtd. Initialize it at
snd_soc_instantiate_card() is very natural and less confusion.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zhijafgk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dai / component related resources are created when component is
registered, and it will be freed when component was unregistered.
These resources are not re-used after that.
This means, we can use devm_xxx for dai / component, without
thinking about kfree().
This patch uses devm_xxx for these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8736gbbu1a.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA needs to setup shortname, longname, and driver.
These methods are very similar.
This patch adds new soc_setup_card_name() and setup these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874l0rbu1i.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is easy to read code if it is cleanly using paired function/naming,
like start <-> stop, register <-> unregister, etc, etc.
But, current ALSA SoC code is very random, unbalance, not paired, etc.
It is easy to create bug at the such code, and it will be difficult to
debug.
soc_cleanup_card_resources() (a) which is paired function of
snd_soc_instantiate_card() (A) is calling soc_remove_dai_links() (*)
to remove card related resources, but it is breaking
add/remove balance (B)(b)(C)(c)(D)(d), in other words
these should be called from soc_cleanup_card_resources() (a)
from balance point of view.
More headacke is that it is using original removing method for
dai_link even though we already have snd_soc_remove_dai_link()
which is the function for it (d).
This patch removes snd_soc_remove_dai_links() and balance up code.
static void soc_remove_dai_links(...)
{
...
(b) soc_remove_link_dais(card);
(c) soc_remove_link_components(card);
for_each_card_links_safe(card, link, _link) {
...
/* it should use snd_soc_remove_dai_link() here */
(d) list_del(&link->list);
}
}
(a) static int soc_cleanup_card_resources(...)
{
...
/* remove and free each DAI */
(*) soc_remove_dai_links(card);
...
}
(A) static int snd_soc_instantiate_card(struct snd_soc_card *card)
{
...
/* add predefined DAI links to the list */
for_each_card_prelinks(card, i, dai_link)
(B) snd_soc_add_dai_link(card, dai_link);
...
/* probe all components used by DAI links on this card */
(C) ret = soc_probe_link_components(card);
...
/* probe all DAI links on this card */
(D) ret = soc_probe_link_dais(card);
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875zl7bu1r.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rtd, rtd->dev, rtd->codec_dais are created by normal kzalloc(),
but we want to use devm_kzalloc() as much as possible.
Created rtd->dev is registered by device_register() at
soc_new_pcm_runtime(), and it will be freed at
soc_free_pcm_runtime() by device_unregister().
This means, if we can use devm_kzalloc(rtd->dev, xxx) for
rtd / rtd->codec_dais, all these are automatically freed
via soc_free_pcm_runtime().
This patch uses devm_kzalloc(rtd->dev, xxx) for rtd / rtd->codec_dais.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877e5nbu1z.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/tas2770.c:796:3-8: No need to set .owner here. The core will do it.
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Fixes: 1a476abc72 ("tas2770: add tas2770 smart PA kernel driver")
CC: Frank Shi <shifu0704@thundersoft.com>
Signed-off-by: kbuild test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20191001175504.ufhyxh66psrht42k@332d0cec05f4
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename arndale_rt5631.c to just arnddale.c as we support other CODECs
than RT5631. While at it replace spaces in Kconfig with tabs.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20191002105652.24821-3-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Arndale boards come with different types of the audio daughter
board. In order to support the WM1811 one we add new definition of
an ASoC card which will be registered when the driver matches on
"samsung,arndale-wm1811" compatible. There is no runtime detection of
the audio daughter board type at the moment, compatible string of the
audio card needs to be adjusted in DT, e.g. by the bootloader,
depending on actual audio board (CODEC) used.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20191002105652.24821-2-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is only one DAI link so we can drop an unnecessary loop statement.
Use card->dai_link in place of direct static arndale_rt5631_dai[] array
dereference as a prerequisite for adding support for other CODECs.
Unnecessary assignment of dai_link->codecs->name to NULL is removed.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20191002105652.24821-1-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Helps with FW debug as it provides DSP IPC processing context.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch prevents the reset of host period bytes
and uses no_stream_position to record requests
for stream position.
Signed-off-by: Marcin Rajwa <marcin.rajwa@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The host period bytes value needs to be passed to firmware.
However current implementation uses this field for different
purpose - to indicate whether FW should send stream position
to the host. Therefore this patch introduces another field
"no_stream_position", a boolean value aimed to store information
about position tracking. This way host_period_bytes preserves its
original value.
Signed-off-by: Marcin Rajwa <marcin.rajwa@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
fw_ready should be a mandatory op. Make sure fw_ready ops is set
during probe.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add config option to prevent DSP entering D3 after any FW exception.
This can then be used to dump FW context for debug.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In a number of debug cases, the DMA-based trace can add problems
(e.g. with HDaudio channel allocation). It also generates additional
traffic on the bus and if the DMA handling is unreliable will prevent
audio use-cases from working normally. Using the trace also requires
tools to be installed on the target.
The trace can be instead handled as dynamic debug. We can use a
Kconfig to force the trace to be enabled in all cases, or use a module
parameter to enable it on a need-basis, e.g. by setting "options
snd_sof sof_debug=0x1" in a /etc/modprobe.d file.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When removing sof module the support_button_press function will oops
because hp_jack pointer is not checked for NULL. So add a check to fix
this.
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927201408.925-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When removing sof module the rt5682 jack handler will oops
if jack detection is not disabled. So add remove function,
which disables the jack detection.
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927201408.925-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a known issue on some Intel platforms which causes
pause/release to run into xrun's during capture usecases.
The suggested workaround to address the issue is to
disable the entry of lower power L1 state in the physical
DMI link when there is a capture stream open.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
FW mailbox offset was not set before use and HDR size was not validated.
Fix this.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "snd_pcm_substream" handle was not initialized properly
in hda-loader.c for firmware load.
When the HDA DMAs were used to load the firmware,
the interrupts related to firmware load also triggered
calls to snd_sof_pcm_period_elapsed() on a non-existent ALSA
PCM stream.
This caused runtime kernel warnings from
pcm_lib.c:snd_pcm_period_elapsed().
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The old STOP sequence is: 1. stop DMA 2. send STOP ipc
If delay happen before the steps 1 and 2, the DMA buffer will be empty in
short time and cause pipeline xrun then stop the pipeline.
Then the step 2 ipc stop will return error as pipeline is already stopped.
Suggested change to avoid the issue is to switch the order of steps 1 and 2
for the stop sequence.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix a bug in sof_pcm_hw_free() where some cleanup actions were
skipped if STREAM_PCM_FREE IPC was already successfully sent to
DSP when the stream was stopped or suspended. This is incorrect
as hw_free should clean up also other resources, including pcm
lib page allocations, period elapsed work queue and call to
platform hw_free.
Fixes: c29d96c3b9b4 ("ASoC: SOF: reset DMA state in prepare")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We are using sof_parse_word_tokens() to parse tokens with
bool/byte/short/word tuple types, here add the missing check, to fix the
parsing failure at byte/bool tuple types.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When we fail to boot the firmware, we encounter a kernel oops in
hda_dsp_get_registers(), which is called conditionally in
hda_dsp_dump() when the sdev_>boot_complete flag is set.
Setting this flag _after_ dumping the data fixes the issue and does
not change the programming flow.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927200538.660-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix potential NULL pointer dereference for alg_region in
wm_adsp_buffer_parse_legacy. In practice this can never happen as
loading the firmware should have failed at the wm_adsp2_setup_algs
stage, however probably better for the code to be robust against
future changes and this is more helpful for static analysis.
Signed-off-by: Li Xu <li.xu@cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20191001130911.19238-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Below Oops is caused in a system which uses ACPI instead of device node:
of_get_named_gpiod_flags: can't parse 'maxim,reset-gpio' property of node '(null)[0]'
BUG: kernel NULL pointer dereference, address: 0000000000000010
This patch avoids NULL pointer deferencing by adding a check before parsing
and initializes to make reset-gpio pin as invalid.
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Link: https://lore.kernel.org/r/1569702150-11976-1-git-send-email-sathyanarayana.nujella@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On stream stop currently we stop the DMA first followed by the CPU DAI.
This can cause underflow (playback) or overflow (capture) on the DAI side
as the DMA is no longer feeding data while the DAI is still active.
It can be observed easily if the DAI side does not have FIFO (or it is
disabled) to survive the time while the DMA is stopped, but still can
happen on relatively slow CPUs when relatively high sampling rate is used:
the FIFO is drained between the time the DMA is stopped and the DAI is
stopped.
It can only fixed by using different sequence within trigger for 'stop' and
'start':
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
Trigger order: dai_link, DMA, CPU DAI then the codec
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
Trigger order: codec, CPU DAI, DMA then dai_link
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190927071646.22319-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is error "aplay: pcm_write:2023: write error: Input/output error"
on i.MX8QM/i.MX8QXP platform for S24_3LE format.
In i.MX8QM/i.MX8QXP, the DMA is EDMA, which don't support 24bit
sample, but we didn't add any constraint, that cause issues.
So we need to query the caps of dma, then update the hw parameters
according to the caps.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/b6a4de2bbf960ef291ee902afe4388bd0fc1d347.1569493933.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When set the runtime hardware parameters, we may need to query
the capability of DMA to complete the parameters.
This patch is to Extract this operation from
dmaengine_pcm_set_runtime_hwparams function to a separate function
snd_dmaengine_pcm_refine_runtime_hwparams, that other components
which need this feature can call this function.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/d728f65194e9978cbec4132b522d4fed420d704a.1569493933.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASRC support 24bit/16bit/8bit input width, which is
data width, not slot width.
For the S20_3LE format, the data with is 20bit, slot width
is 24bit, if we set ASRMCR1n.IWD to be 24bits, the result
is the volume is lower than expected, it likes 24bit data
right shift 4 bits
So replace S20_3LE with S24_3LE in supported list and add S8
format in TX supported list
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/45a7c383f43cc1dd9d0934846447aee653278c03.1569493933.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_pcm_format_t is more formal than enum asrc_word_width, which has
two property, width and physical width, which is more accurate than
enum asrc_word_width. So it is better to use in(out)put_format
instead of in(out)put_word_width.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/7937c1404ee327ce141cb03b3575b02ea01a740c.1569493933.git.shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The adau1761 has a automatic level control block that can adjust the gain
for the differential input PGA. This patch adds ALSA controls for enabling
and changing the parameter settings for the ALC.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20190926115012.24049-2-alexandru.ardelean@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The PGA Slew Time control allows to configure the rate with which the PGA
gain control ramps up/down to the target setting.
The PGA slew control is done via the ALC Control 0 register. There are 2
bits on that reg, that control PGA slew time, while the other bits control
parts of the ALC (automatic level control) block.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20190926115012.24049-1-alexandru.ardelean@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For a sound card ignore_machine means that existing FEs links should be
ignored and existing BEs links should be overridden with some information
from the matching component driver.
Current code make some confusions about this so fix it!
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20190925183358.11955-1-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If we can use devm_kzalloc(rtd->dev, xxx) for rtdcom,
we don't need to call snd_soc_rtdcom_del_all() for kfree().
This patch uses devm_kzalloc(rtd->dev, xxx) for rtdcom,
and remove snd_soc_rtdcom_del_all().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875zlyf7ln.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch allocs dev first at soc_new_pcm_runtime().
This is prepare for rtd->dev, rtd->codec_dais alloc cleanup
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877e6ef7m1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
"rtd" is handled by soc_xxx_pcm_runtime(), and
"rtd->dev" is handled by soc_rtd_xxx().
There is no reason to separate these, and it makes code complex.
We can free these in the same time.
Here soc_rtd_free() (A) which frees rtd->dev is called from
soc_remove_link_dais() many times (1).
Then, it is using dev_registered flags to avoid multi kfree() (2).
This is no longer needed if we can merge these functions.
static void soc_remove_link_dais(...)
{
...
(1) for_each_comp_order(order) {
(1) for_each_card_rtds(card, rtd) {
(A) soc_rtd_free(rtd);
...
}
}
}
(A) static void soc_rtd_free(...)
{
(2) if (rtd->dev_registered) {
/* we don't need to call kfree() for rtd->dev */
device_unregister(rtd->dev);
(2) rtd->dev_registered = 0;
}
}
This patch merges soc_rtd_free() into soc_free_pcm_runtime().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878squf7oi.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
"rtd" is handled by soc_xxx_pcm_runtime(), and
"rtd->dev" is handled by soc_rtd_xxx().
There is no reason to separate these, and it makes code complex.
We can create these in the same time.
This patch merges soc_rtd_init() into soc_new_pcm_runtime().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a7baf7pz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_new_pcm_runtime() allocs rtd and rtd->codec_dais.
This patch allocs both first, and setup these after that.
This is prepare for soc_new_pcm_runtime() cleanup.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87blvqf7qz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto