If nfsd4_check_resp_size() returns an error then we should really be
truncating the reply here, otherwise we may leave extra garbage at the
end of the rpc reply.
Also add a warning to catch any cases where our reply-size estimates may
be wrong in the case of a non-idempotent operation.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently if the nfs-level part of a reply would be too large, we'll
return an error to the client. But if the nfs-level part fits and
leaves no room for krb5p or krb5i stuff, then we just drop the request
entirely.
That's no good. Instead, reserve some slack space at the end of the
buffer and make sure we fail outright if we'd come close.
The slack space here is a massive overstimate of what's required, we
should probably try for a tighter limit at some point.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Just change the nfsd4_encode_getattr api. Not changing any code or
adding any new functionality yet.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is a mechanical transformation with no change in behavior.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently a non-idempotent op reply may be cached if it fails in the
proc code but not if it fails at xdr decoding. I doubt there are any
xdr-decoding-time errors that would make this a problem in practice, so
this probably isn't a serious bug.
The space estimates should also take into account space required for
encoding of error returns. Again, not a practical problem, though it
would become one after future patches which will tighten the space
estimates.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The client is actually asking for 2532 bytes. I suspect that's a
mistake. But maybe we can allow some more. In theory lock needs more
if it might return a maximum-length lockowner in the denied case.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
OP_MODIFIES_SOMETHING flags operations that we should be careful not to
initiate without being sure we have the buffer space to encode a reply.
None of these ops fall into that category.
We could probably remove a few more, but this isn't a very important
problem at least for ops whose reply size is easy to estimate.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
PF_LESS_THROTTLE has a very specific use case: to avoid deadlocks
and live-locks while writing to the page cache in a loop-back
NFS mount situation.
It therefore makes sense to *only* set PF_LESS_THROTTLE in this
situation.
We now know when a request came from the local-host so it could be a
loop-back mount. We already know when we are handling write requests,
and when we are doing anything else.
So combine those two to allow nfsd to still be throttled (like any
other process) in every situation except when it is known to be
problematic.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If an incoming NFS request is coming from the local host, then
nfsd will need to perform some special handling. So detect that
possibility and make the source visible in rq_local.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If the accept() call fails, we need to put the module reference.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
An NFS/RDMA client's source port is meaningless for RDMA transports.
The transport layer typically sets the source port value on the
connection to a random ephemeral port.
Currently, NFS server administrators must specify the "insecure"
export option to enable clients to access exports via RDMA.
But this means NFS clients can access such an export via IP using an
ephemeral port, which may not be desirable.
This patch eliminates the need to specify the "insecure" export
option to allow NFS/RDMA clients access to an export.
BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=250
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
No need for a kmem_cache_destroy wrapper in nfsd, just do proper
goto based unwinding.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Assignments should not happen inside an if conditional, but in the line
before. This issue was reported by checkpatch.
The semantic patch that makes this change is as follows
(http://coccinelle.lip6.fr/):
// <smpl>
@@
identifier i1;
expression e1;
statement S;
@@
-if(!(i1 = e1)) S
+i1 = e1;
+if(!i1)
+S
// </smpl>
It has been tested by compilation.
Signed-off-by: Benoit Taine <benoit.taine@lip6.fr>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We're not cleaning up everything we need to on error. In particular,
we're not removing our lease. Among other problems this can cause the
struct nfs4_file used as fl_owner to be referenced after it has been
destroyed.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We're clearing the SUID/SGID bits on write by hand in nfsd_vfs_write,
even though the subsequent vfs_writev() call will end up doing this for
us (through file system write methods eventually calling
file_remove_suid(), e.g., from __generic_file_aio_write).
So, remove the redundant nfsd code.
The only change in behavior is when the write is by root, in which case
we previously cleared SUID/SGID, but will now leave it alone. The new
behavior is the behavior of every filesystem we've checked.
It seems better to be consistent with local filesystem behavior. And
the security advantage seems limited as root could always restore these
bits by hand if it wanted.
SUID/SGID is not cleared after writing data with (root, local ext4),
File: ‘test’
Size: 0 Blocks: 0 IO Block: 4096 regular
empty file
Device: 803h/2051d Inode: 1200137 Links: 1
Access: (4777/-rwsrwxrwx) Uid: ( 0/ root) Gid: ( 0/ root)
Context: unconfined_u:object_r:admin_home_t:s0
Access: 2014-04-18 21:36:31.016029014 +0800
Modify: 2014-04-18 21:36:31.016029014 +0800
Change: 2014-04-18 21:36:31.026030285 +0800
Birth: -
File: ‘test’
Size: 5 Blocks: 8 IO Block: 4096 regular file
Device: 803h/2051d Inode: 1200137 Links: 1
Access: (4777/-rwsrwxrwx) Uid: ( 0/ root) Gid: ( 0/ root)
Context: unconfined_u:object_r:admin_home_t:s0
Access: 2014-04-18 21:36:31.016029014 +0800
Modify: 2014-04-18 21:36:31.040032065 +0800
Change: 2014-04-18 21:36:31.040032065 +0800
Birth: -
With no_root_squash, (root, remote ext4), SUID/SGID are cleared,
File: ‘test’
Size: 0 Blocks: 0 IO Block: 262144 regular
empty file
Device: 24h/36d Inode: 786439 Links: 1
Access: (4777/-rwsrwxrwx) Uid: ( 1000/ test) Gid: ( 1000/ test)
Context: system_u:object_r:nfs_t:s0
Access: 2014-04-18 21:45:32.155805097 +0800
Modify: 2014-04-18 21:45:32.155805097 +0800
Change: 2014-04-18 21:45:32.168806749 +0800
Birth: -
File: ‘test’
Size: 5 Blocks: 8 IO Block: 262144 regular file
Device: 24h/36d Inode: 786439 Links: 1
Access: (0777/-rwxrwxrwx) Uid: ( 1000/ test) Gid: ( 1000/ test)
Context: system_u:object_r:nfs_t:s0
Access: 2014-04-18 21:45:32.155805097 +0800
Modify: 2014-04-18 21:45:32.184808783 +0800
Change: 2014-04-18 21:45:32.184808783 +0800
Birth: -
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The current code assumes a one-to-one lockowner<->lock stateid
correspondance.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The nfsv4 state code has always assumed a one-to-one correspondance
between lock stateid's and lockowners even if it appears not to in some
places.
We may actually change that, but for now when FREE_STATEID releases a
lock stateid it also needs to release the parent lockowner.
Symptoms were a subsequent LOCK crashing in find_lockowner_str when it
calls same_lockowner_ino on a lockowner that unexpectedly has an empty
so_stateids list.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
As of 06f9cc12ca "nfsd4: don't create
unnecessary mask acl", any non-trivial ACL will be left with an
unitialized entry, and a trivial ACL may write one entry beyond what's
allocated.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Use fh_fsid when reffering to the fsid part of the filehandle. The
variable length auth field envisioned in nfsfh wasn't ever implemented.
Also clean up some lose ends around this and document the file handle
format better.
Btw, why do we even export nfsfh.h to userspace? The file handle very
much is kernel private, and nothing in nfs-utils include the header
either.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
commit 4ac7249ea5 have remove all EXPORT_SYMBOL,
linux/export.h is not needed, just clean it.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move the state locking and file descriptor reference out from the
callers and into nfs4_preprocess_stateid_op() itself.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
They do not need to be used outside fs/nfsd/nfs4state.c
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There is almost nothing left it in, just merge it into the only file
that includes it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There are no legitimate users outside of fs/nfsd, so move it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There are no legitimate users outside of fs/nfsd, so move it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The only real user of this header is fs/nfsd/nfsfh.h, so merge the
two. Various lockѕ source files used it to indirectly get other
sunrpc or nfs headers, so fix those up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It is large, it is used in more than one place, and it is not performance
critical. Let gcc figure out whether it should be inlined...
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When building without CONFIG_SYSCTL, the compiler saw an unused
label. This moves the label into the #ifdef it is used under.
fs/lockd/svc.c: In function ‘init_nlm’:
fs/lockd/svc.c:626:1: warning: label ‘err_sysctl’ defined but not used [-Wunused-label]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Mainly to ensure that we don't leave any hanging timers.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Aside from making it clearer what is non-trivial in create_client(), it
also fixes a bug whereby we can call free_client() before idr_init()
has been called.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Since we're still limiting attributes to a page, the result here is that
a large getattr result will return NFS4ERR_REP_TOO_BIG/TOO_BIG_TO_CACHE
instead of NFS4ERR_RESOURCE.
Both error returns are wrong, and the real bug here is the arbitrary
limit on getattr results, fixed by as-yet out-of-tree patches. But at a
minimum we can make life easier for clients by sticking to one broken
behavior in released kernels instead of two....
Trond says:
one immediate consequence of this patch will be that NFSv4.1
clients will now report EIO instead of EREMOTEIO if they hit the
problem. That may make debugging a little less obvious.
Another consequence will be that if we ever do try to add client
side handling of NFS4ERR_REP_TOO_BIG, then we now have to deal
with the “handle existing buggy server” syndrome.
Reported-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...otherwise the logic in the timeout handling doesn't work correctly.
Spotted-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
A fl->fl_break_time of 0 has a special meaning to the lease break code
that basically means "never break the lease". knfsd uses this to ensure
that leases don't disappear out from under it.
Unfortunately, the code in __break_lease can end up passing this value
to wait_event_interruptible as a timeout, which prevents it from going
to sleep at all. This causes __break_lease to spin in a tight loop and
causes soft lockups.
Fix this by ensuring that we pass a minimum value of 1 as a timeout
instead.
Cc: <stable@vger.kernel.org>
Cc: J. Bruce Fields <bfields@fieldses.org>
Reported-by: Terry Barnaby <terry1@beam.ltd.uk>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Some versions of gcc even warn about it:
mm/shmem.c: In function ‘shmem_file_aio_read’:
mm/shmem.c:1414: warning: ‘error’ may be used uninitialized in this function
If the loop is aborted during the first iteration by one of the two
first break statements, error will be uninitialized.
Introduced by commit 6e58e79db8 ("introduce copy_page_to_iter, kill
loop over iovec in generic_file_aio_read()").
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On 32 bit, size_t is "unsigned int", not "unsigned long", causing the
following warning when comparing with PAGE_SIZE, which is always "unsigned
long":
fs/cifs/file.c: In function ‘cifs_readdata_to_iov’:
fs/cifs/file.c:2757: warning: comparison of distinct pointer types lacks a cast
Introduced by commit 7f25bba819 ("cifs_iovec_read: keep iov_iter
between the calls of cifs_readdata_to_iov()"), which changed the
signedness of "remaining" and the code from min_t() to min().
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull slab changes from Pekka Enberg:
"The biggest change is byte-sized freelist indices which reduces slab
freelist memory usage:
https://lkml.org/lkml/2013/12/2/64"
* 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
mm: slab/slub: use page->list consistently instead of page->lru
mm/slab.c: cleanup outdated comments and unify variables naming
slab: fix wrongly used macro
slub: fix high order page allocation problem with __GFP_NOFAIL
slab: Make allocations with GFP_ZERO slightly more efficient
slab: make more slab management structure off the slab
slab: introduce byte sized index for the freelist of a slab
slab: restrict the number of objects in a slab
slab: introduce helper functions to get/set free object
slab: factor out calculate nr objects in cache_estimate
Pull misc kbuild changes from Michal Marek:
"Here is the non-critical part of kbuild:
- One bogus coccinelle check removed, one check fixed not to suggest
the obsolete PTR_RET macro
- scripts/tags.sh does not index the generated *.mod.c files
- new objdiff tool to list differences between two versions of an
object file
- A fix for scripts/bootgraph.pl"
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
scripts/coccinelle: Use PTR_ERR_OR_ZERO
scripts/bootgraph.pl: Add graphic header
scripts: objdiff: detect object code changes between two commits
Coccicheck: Remove memcpy to struct assignment test
scripts/tags.sh: Ignore *.mod.c
This patch fixes I/O errors with the sym53c8xx_2 driver when the disk
returns QUEUE FULL status.
When the controller encounters an error (including QUEUE FULL or BUSY
status), it aborts all not yet submitted requests in the function
sym_dequeue_from_squeue.
This function aborts them with DID_SOFT_ERROR.
If the disk has full tag queue, the request that caused the overflow is
aborted with QUEUE FULL status (and the scsi midlayer properly retries
it until it is accepted by the disk), but the sym53c8xx_2 driver aborts
the following requests with DID_SOFT_ERROR --- for them, the midlayer
does just a few retries and then signals the error up to sd.
The result is that disk returning QUEUE FULL causes request failures.
The error was reproduced on 53c895 with COMPAQ BD03685A24 disk
(rebranded ST336607LC) with command queue 48 or 64 tags. The disk has
64 tags, but under some access patterns it return QUEUE FULL when there
are less than 64 pending tags. The SCSI specification allows returning
QUEUE FULL anytime and it is up to the host to retry.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 8f619b5429 ("powerpc/ppc64: Do not turn AIL (reloc-on
interrupts) too early") added code to set the AIL bit in the LPCR
without checking whether the kernel is running in hypervisor mode. The
result is that when the kernel is running as a guest (i.e., under
PowerKVM or PowerVM), the processor takes a privileged instruction
interrupt at that point, causing a panic. The visible result is that
the kernel hangs after printing "returning from prom_init".
This fixes it by checking for hypervisor mode being available before
setting LPCR. If we are not in hypervisor mode, we enable relocation-on
interrupts later in pSeries_setup_arch using the H_SET_MODE hcall.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commits 11d4616bd0 ("futex: revert back to the explicit waiter
counting code") and 69cd9eba38 ("futex: avoid race between requeue and
wake") changed some of the finer details of how we think about futexes.
One was a late fix and the other a consequence of overlooking the whole
requeuing logic.
The first change caused our documentation to be incorrect, and the
second made us aware that we need to explicitly add more details to it.
Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
J. Bruce Fields