Commit Graph

91 Commits

Author SHA1 Message Date
Frederic Weisbecker bdd4e85dc3 sched: Isolate preempt counting in its own config option
Create a new CONFIG_PREEMPT_COUNT that handles the inc/dec
of preempt count offset independently. So that the offset
can be updated by preempt_disable() and preempt_enable()
even without the need for CONFIG_PREEMPT beeing set.

This prepares to make CONFIG_DEBUG_SPINLOCK_SLEEP working
with !CONFIG_PREEMPT where it currently doesn't detect
code that sleeps inside explicit preemption disabled
sections.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
2011-06-10 15:15:40 +02:00
Lai Jiangshan 9ab1544eb4 rcu: introduce kfree_rcu()
Many rcu callbacks functions just call kfree() on the base structure.
These functions are trivial, but their size adds up, and furthermore
when they are used in a kernel module, that module must invoke the
high-latency rcu_barrier() function at module-unload time.

The kfree_rcu() function introduced by this commit addresses this issue.
Rather than encoding a function address in the embedded rcu_head
structure, kfree_rcu() instead encodes the offset of the rcu_head
structure within the base structure.  Because the functions are not
allowed in the low-order 4096 bytes of kernel virtual memory, offsets
up to 4095 bytes can be accommodated.  If the offset is larger than
4095 bytes, a compile-time error will be generated in __kfree_rcu().
If this error is triggered, you can either fall back to use of call_rcu()
or rearrange the structure to position the rcu_head structure into the
first 4096 bytes.

Note that the allowable offset might decrease in the future, for example,
to allow something like kmem_cache_free_rcu().

The new kfree_rcu() function can replace code as follows:

	call_rcu(&p->rcu, simple_kfree_callback);

where "simple_kfree_callback()" might be defined as follows:

	void simple_kfree_callback(struct rcu_head *p)
	{
		struct foo *q = container_of(p, struct foo, rcu);

		kfree(q);
	}

with the following:

	kfree_rcu(&p->rcu, rcu);

Note that the "rcu" is the name of a field in the structure being
freed.  The reason for using this rather than passing in a pointer
to the base structure is that the above approach allows better type
checking.

This commit is based on earlier work by Lai Jiangshan and Manfred Spraul:

Lai's V1 patch: http://lkml.org/lkml/2008/9/18/1
Manfred's patch: http://lkml.org/lkml/2009/1/2/115

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-05-05 23:16:59 -07:00
Paul E. McKenney b0c9d7ff27 rcu: add DEBUG_OBJECTS_RCU_HEAD check for alignment
Verify that rcu_head structures are aligned to a four-byte boundary.
This check is enabled by CONFIG_DEBUG_OBJECTS_RCU_HEAD.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-05-05 23:16:57 -07:00
Paul E. McKenney 4a29865689 rcu: make rcutorture version numbers available through debugfs
It is not possible to accurately correlate rcutorture output with that
of debugfs.  This patch therefore adds a debugfs file that prints out
the rcutorture version number, permitting easy correlation.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-05-05 23:16:56 -07:00
Paul E. McKenney a4dd99250d rcu: create new rcu_access_index() and use in mce
The MCE subsystem needs to sample an RCU-protected index outside of
any protection for that index.  If this was a pointer, we would use
rcu_access_pointer(), but there is no corresponding rcu_access_index().
This commit therefore creates an rcu_access_index() and applies it
to MCE.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Zdenek Kabelac <zkabelac@redhat.com>
2011-04-01 07:27:31 -07:00
Tejun Heo e27fc9641e rcu: increase synchronize_sched_expedited() batching
The fix in commit #6a0cc49 requires more than three concurrent instances
of synchronize_sched_expedited() before batching is possible.  This
patch uses a ticket-counter-like approach that is also not unrelated to
Lai Jiangshan's Ring RCU to allow sharing of expedited grace periods even
when there are only two concurrent instances of synchronize_sched_expedited().

This commit builds on Tejun's original posting, which may be found at
http://lkml.org/lkml/2010/11/9/204, adding memory barriers, avoiding
overflow of signed integers (other than via atomic_t), and fixing the
detection of batching.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-12-17 12:34:08 -08:00
Lai Jiangshan 7b27d5475f rcu,cleanup: move synchronize_sched_expedited() out of sched.c
The first version of synchronize_sched_expedited() used the migration
code in the scheduler, and was therefore implemented in kernel/sched.c.
However, the more recent version of this code no longer uses the
migration code, so this commit moves it to the main RCU source files.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-11-29 22:01:58 -08:00
Paul E. McKenney b2c0710c46 rcu: move TINY_RCU from softirq to kthread
If RCU priority boosting is to be meaningful, callback invocation must
be boosted in addition to preempted RCU readers.  Otherwise, in presence
of CPU real-time threads, the grace period ends, but the callbacks don't
get invoked.  If the callbacks don't get invoked, the associated memory
doesn't get freed, so the system is still subject to OOM.

But it is not reasonable to priority-boost RCU_SOFTIRQ, so this commit
moves the callback invocations to a kthread, which can be boosted easily.

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-11-17 15:45:09 -08:00
Paul E. McKenney 53ecfba259 rcu: only one evaluation of arg in rcu_dereference_check() unless sparse
The current version of the __rcu_access_pointer(), __rcu_dereference_check(),
and __rcu_dereference_protected() macros evaluate their "p" argument
three times, not counting typeof()s.  This is bad news if that argument
contains a side effect.  This commit therefore evaluates this argument
only once in normal kernel builds.  However, the straightforward approach
defeats sparse's RCU-pointer checking, so when __CHECKER__ is defined,
the additional pair of evaluations of the "p" argument are performed in
order to permit sparse to detect misuse of RCU-protected pointers.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
2010-09-23 09:15:01 -07:00
Paul E. McKenney 7b0b759b65 rcu: combine duplicate code, courtesy of CONFIG_PREEMPT_RCU
The CONFIG_PREEMPT_RCU kernel configuration parameter was recently
re-introduced, but as an indication of the type of RCU (preemptible
vs. non-preemptible) instead of as selecting a given implementation.
This commit uses CONFIG_PREEMPT_RCU to combine duplicate code
from include/linux/rcutiny.h and include/linux/rcutree.h into
include/linux/rcupdate.h.  This commit also combines a few other pieces
of duplicate code that have accumulated.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-08-20 09:00:16 -07:00
Paul E. McKenney a3dc3fb161 rcu: repair code-duplication FIXMEs
Combine the duplicate definitions of ULONG_CMP_GE(), ULONG_CMP_LT(),
and rcu_preempt_depth() into include/linux/rcupdate.h.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-08-20 09:00:13 -07:00
Paul E. McKenney 9079fd7c2e rcu: update obsolete rcu_read_lock() comment.
The comment says that blocking is illegal in rcu_read_lock()-style
RCU read-side critical sections, which is no longer entirely true
given preemptible RCU.  This commit provides a fix.

Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-08-20 09:00:10 -07:00
Paul E. McKenney a57eb940d1 rcu: Add a TINY_PREEMPT_RCU
Implement a small-memory-footprint uniprocessor-only implementation of
preemptible RCU.  This implementation uses but a single blocked-tasks
list rather than the combinatorial number used per leaf rcu_node by
TREE_PREEMPT_RCU, which reduces memory consumption and greatly simplifies
processing.  This version also takes advantage of uniprocessor execution
to accelerate grace periods in the case where there are no readers.

The general design is otherwise broadly similar to that of TREE_PREEMPT_RCU.

This implementation is a step towards having RCU implementation driven
off of the SMP and PREEMPT kernel configuration variables, which can
happen once this implementation has accumulated sufficient experience.

Removed ACCESS_ONCE() from __rcu_read_unlock() and added barrier() as
suggested by Steve Rostedt in order to avoid the compiler-reordering
issue noted by Mathieu Desnoyers (http://lkml.org/lkml/2010/8/16/183).

As can be seen below, CONFIG_TINY_PREEMPT_RCU represents almost 5Kbyte
savings compared to CONFIG_TREE_PREEMPT_RCU.  Of course, for non-real-time
workloads, CONFIG_TINY_RCU is even better.

	CONFIG_TREE_PREEMPT_RCU

	   text	   data	    bss	    dec	   filename
	     13	      0	      0	     13	   kernel/rcupdate.o
	   6170	    825	     28	   7023	   kernel/rcutree.o
				   ----
				   7026    Total

	CONFIG_TINY_PREEMPT_RCU

	   text	   data	    bss	    dec	   filename
	     13	      0	      0	     13	   kernel/rcupdate.o
	   2081	     81	      8	   2170	   kernel/rcutiny.o
				   ----
				   2183    Total

	CONFIG_TINY_RCU (non-preemptible)

	   text	   data	    bss	    dec	   filename
	     13	      0	      0	     13	   kernel/rcupdate.o
	    719	     25	      0	    744	   kernel/rcutiny.o
				    ---
				    757    Total

Requested-by: Loïc Minier <loic.minier@canonical.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-08-20 08:55:00 -07:00
Mathieu Desnoyers 5e8067adfd rcu head remove init
RCU heads really don't need to be initialized. Their state before call_rcu()
really does not matter.

We need to keep init/destroy_rcu_head_on_stack() though, since we want
debugobjects to be able to keep track of these objects.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: David S. Miller <davem@davemloft.net>
CC: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
CC: akpm@linux-foundation.org
CC: mingo@elte.hu
CC: laijs@cn.fujitsu.com
CC: dipankar@in.ibm.com
CC: josh@joshtriplett.org
CC: dvhltc@us.ibm.com
CC: niv@us.ibm.com
CC: tglx@linutronix.de
CC: peterz@infradead.org
CC: rostedt@goodmis.org
CC: Valdis.Kletnieks@vt.edu
CC: dhowells@redhat.com
CC: eric.dumazet@gmail.com
CC: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2010-08-19 17:18:03 -07:00
Paul E. McKenney 77d8485a8b rcu: improve kerneldoc for rcu_read_lock(), call_rcu(), and synchronize_rcu()
Make it explicit that new RCU read-side critical sections that start
after call_rcu() and synchronize_rcu() start might still be running
after the end of the relevant grace period.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2010-08-19 17:18:02 -07:00
Tetsuo Handa 4221a9918e Add RCU check for find_task_by_vpid().
find_task_by_vpid() says "Must be called under rcu_read_lock().". But due to
commit 3120438 "rcu: Disable lockdep checking in RCU list-traversal primitives",
we are currently unable to catch "find_task_by_vpid() with tasklist_lock held
but RCU lock not held" errors due to the RCU-lockdep checks being
suppressed in the RCU variants of the struct list_head traversals.
This commit therefore places an explicit check for being in an RCU
read-side critical section in find_task_by_pid_ns().

  ===================================================
  [ INFO: suspicious rcu_dereference_check() usage. ]
  ---------------------------------------------------
  kernel/pid.c:386 invoked rcu_dereference_check() without protection!

  other info that might help us debug this:

  rcu_scheduler_active = 1, debug_locks = 1
  1 lock held by rc.sysinit/1102:
   #0:  (tasklist_lock){.+.+..}, at: [<c1048340>] sys_setpgid+0x40/0x160

  stack backtrace:
  Pid: 1102, comm: rc.sysinit Not tainted 2.6.35-rc3-dirty #1
  Call Trace:
   [<c105e714>] lockdep_rcu_dereference+0x94/0xb0
   [<c104b4cd>] find_task_by_pid_ns+0x6d/0x70
   [<c104b4e8>] find_task_by_vpid+0x18/0x20
   [<c1048347>] sys_setpgid+0x47/0x160
   [<c1002b50>] sysenter_do_call+0x12/0x36

Commit updated to use a new rcu_lockdep_assert() exported API rather than
the old internal __do_rcu_dereference().

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2010-08-19 17:18:02 -07:00
Paul E. McKenney ca5ecddfa8 rcu: define __rcu address space modifier for sparse
This commit provides definitions for the __rcu annotation defined earlier.
This annotation permits sparse to check for correct use of RCU-protected
pointers.  If a pointer that is annotated with __rcu is accessed
directly (as opposed to via rcu_dereference(), rcu_assign_pointer(),
or one of their variants), sparse can be made to complain.  To enable
such complaints, use the new default-disabled CONFIG_SPARSE_RCU_POINTER
kernel configuration option.  Please note that these sparse complaints are
intended to be a debugging aid, -not- a code-style-enforcement mechanism.

There are special rcu_dereference_protected() and rcu_access_pointer()
accessors for use when RCU read-side protection is not required, for
example, when no other CPU has access to the data structure in question
or while the current CPU hold the update-side lock.

This patch also updates a number of docbook comments that were showing
their age.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Christopher Li <sparse@chrisli.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2010-08-19 17:17:59 -07:00
Paul E. McKenney f5155b3327 rcu: add an rcu_dereference_index_check()
The sparse RCU-pointer checking relies on type magic that dereferences
the pointer in question.  This does not work if the pointer is in fact
an array index.  This commit therefore supplies a new RCU API that
omits the sparse checking to continue to support rcu_dereference()
on integers.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-06-14 16:37:26 -07:00
Mathieu Desnoyers 551d55a944 tree/tiny rcu: Add debug RCU head objects
Helps finding racy users of call_rcu(), which results in hangs because list
entries are overwritten and/or skipped.

Changelog since v4:
- Bissectability is now OK
- Now generate a WARN_ON_ONCE() for non-initialized rcu_head passed to
  call_rcu(). Statically initialized objects are detected with
  object_is_static().
- Rename rcu_head_init_on_stack to init_rcu_head_on_stack.
- Remove init_rcu_head() completely.

Changelog since v3:
- Include comments from Lai Jiangshan

This new patch version is based on the debugobjects with the newly introduced
"active state" tracker.

Non-initialized entries are all considered as "statically initialized". An
activation fixup (triggered by call_rcu()) takes care of performing the debug
object initialization without issuing any warning. Since we cannot increase the
size of struct rcu_head, I don't see much room to put an identifier for
statically initialized rcu_head structures. So for now, we have to live without
"activation without explicit init" detection. But the main purpose of this debug
option is to detect double-activations (double call_rcu() use of a rcu_head
before the callback is executed), which is correctly addressed here.

This also detects potential internal RCU callback corruption, which would cause
the callbacks to be executed twice.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: David S. Miller <davem@davemloft.net>
CC: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
CC: akpm@linux-foundation.org
CC: mingo@elte.hu
CC: laijs@cn.fujitsu.com
CC: dipankar@in.ibm.com
CC: josh@joshtriplett.org
CC: dvhltc@us.ibm.com
CC: niv@us.ibm.com
CC: tglx@linutronix.de
CC: peterz@infradead.org
CC: rostedt@goodmis.org
CC: Valdis.Kletnieks@vt.edu
CC: dhowells@redhat.com
CC: eric.dumazet@gmail.com
CC: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
2010-06-14 16:37:26 -07:00
Mathieu Desnoyers 4376030a54 rcu head introduce rcu head init on stack
PEM:
o     Would it be possible to make this bisectable as follows?

      a.      Insert a new patch after current patch 4/6 that
              defines destroy_rcu_head_on_stack(),
              init_rcu_head_on_stack(), and init_rcu_head() with
              their !CONFIG_DEBUG_OBJECTS_RCU_HEAD definitions.

This patch performs this transition.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
CC: David S. Miller <davem@davemloft.net>
CC: akpm@linux-foundation.org
CC: mingo@elte.hu
CC: laijs@cn.fujitsu.com
CC: dipankar@in.ibm.com
CC: josh@joshtriplett.org
CC: dvhltc@us.ibm.com
CC: niv@us.ibm.com
CC: tglx@linutronix.de
CC: peterz@infradead.org
CC: rostedt@goodmis.org
CC: Valdis.Kletnieks@vt.edu
CC: dhowells@redhat.com
CC: eric.dumazet@gmail.com
CC: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10 16:53:55 -07:00
Paul E. McKenney bbad937983 rcu: slim down rcutiny by removing rcu_scheduler_active and friends
TINY_RCU does not need rcu_scheduler_active unless CONFIG_DEBUG_LOCK_ALLOC.
So conditionally compile rcu_scheduler_active in order to slim down
rcutiny a bit more.  Also gets rid of an EXPORT_SYMBOL_GPL, which is
responsible for most of the slimming.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10 11:08:34 -07:00
Paul E. McKenney da848c47bc rcu: shrink rcutiny by making synchronize_rcu_bh() be inline
Because synchronize_rcu_bh() is identical to synchronize_sched(),
make the former a static inline invoking the latter, saving the
overhead of an EXPORT_SYMBOL_GPL() and the duplicate code.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10 11:08:32 -07:00
Paul E. McKenney 32c141a0a1 rcu: fix now-bogus rcu_scheduler_active comments.
The rcu_scheduler_active check has been wrapped into the new
debug_lockdep_rcu_enabled() function, so update the comments to
reflect this new reality.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10 11:08:32 -07:00
Paul E. McKenney d20200b591 rcu: Fix bogus CONFIG_PROVE_LOCKING in comments to reflect reality.
It is CONFIG_DEBUG_LOCK_ALLOC rather than CONFIG_PROVE_LOCKING, so fix it.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10 11:08:32 -07:00
Lai Jiangshan 2b3fc35f69 rcu: optionally leave lockdep enabled after RCU lockdep splat
There is no need to disable lockdep after an RCU lockdep splat,
so remove the debug_lockdeps_off() from lockdep_rcu_dereference().
To avoid repeated lockdep splats, use a static variable in the inlined
rcu_dereference_check() and rcu_dereference_protected() macros so that
a given instance splats only once, but so that multiple instances can
be detected per boot.

This is controlled by a new config variable CONFIG_PROVE_RCU_REPEATEDLY,
which is disabled by default.  This provides the normal lockdep behavior
by default, but permits people who want to find multiple RCU-lockdep
splats per boot to easily do so.

Requested-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Tested-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-05-10 11:08:31 -07:00
Paul E. McKenney ee84b8243b rcu: create rcu_my_thread_group_empty() wrapper
Some RCU-lockdep splat repairs need to know whether they are running
in a single-threaded process.  Unfortunately, the thread_group_empty()
primitive is defined in sched.h, and can induce #include hell.  This
commit therefore introduces a rcu_my_thread_group_empty() wrapper that
is defined in rcupdate.c, thus avoiding the need to include sched.h
everywhere.

Signed-off-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
2010-05-06 09:28:41 -07:00
Paul E. McKenney bc293d62b2 rcu: Make RCU lockdep check the lockdep_recursion variable
The lockdep facility temporarily disables lockdep checking by
incrementing the current->lockdep_recursion variable.  Such
disabling happens in NMIs and in other situations where lockdep
might expect to recurse on itself.

This patch therefore checks current->lockdep_recursion, disabling RCU
lockdep splats when this variable is non-zero.  In addition, this patch
removes the "likely()", as suggested by Lai Jiangshan.

Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Reported-by: David Miller <davem@davemloft.net>
Tested-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
Cc: eric.dumazet@gmail.com
LKML-Reference: <20100415195039.GA22623@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-19 08:37:19 +02:00
David Howells c08c68dd76 rcu: Better explain the condition parameter of rcu_dereference_check()
Better explain the condition parameter of
rcu_dereference_check() that describes the conditions under
which the dereference is permitted to take place (and
incorporate Yong Zhang's suggestion).  This condition is only
checked under lockdep proving.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: eric.dumazet@gmail.com
LKML-Reference: <1270852752-25278-2-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-14 12:20:04 +02:00
Paul E. McKenney b62730baea rcu: Add rcu_access_pointer and rcu_dereference_protected
This patch adds variants of rcu_dereference() that handle
situations where the RCU-protected data structure cannot change,
perhaps due to our holding the update-side lock, or where the
RCU-protected pointer is only to be fetched, not dereferenced.
These are needed due to some performance concerns with using
rcu_dereference() where it is not required, aside from the need
for lockdep/sparse checking.

The new rcu_access_pointer() primitive is for the case where the
pointer is be fetch and not dereferenced.  This primitive may be
used without protection, RCU or otherwise, due to the fact that
it uses ACCESS_ONCE().

The new rcu_dereference_protected() primitive is for the case
where updates are prevented, for example, due to holding the
update-side lock.  This primitive does neither ACCESS_ONCE() nor
smp_read_barrier_depends(), so can only be used when updates are
somehow prevented.

Suggested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
Cc: eric.dumazet@gmail.com
LKML-Reference: <1270852752-25278-1-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-04-14 12:19:51 +02:00
Lai Jiangshan 0cff810f54 rcu: Fix local_irq_disable() CONFIG_PROVE_RCU=y false positives
It is documented that local_irq_disable() also delimits RCU_SCHED
read-site critical sections.

See the document of synchronize_sched() or
Documentation/RCU/whatisRCU.txt.

So we have to test irqs_disabled() in rcu_read_lock_sched_held().
Otherwise rcu-lockdep brings incorrect complaint.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
Cc: eric.dumazet@gmail.com
LKML-Reference: <1268940334-10892-1-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-18 21:25:32 +01:00
Paul E. McKenney e3818b8dce rcu: Make rcu_read_lock_bh_held() allow for disabled BH
Disabling BH can stand in for rcu_read_lock_bh(), and this patch
updates rcu_read_lock_bh_held() to allow for this.  In order to
avoid include-file hell, this function is moved out of line to
kernel/rcupdate.c.

This fixes a false positive RCU warning.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <20100316000343.GA25857@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-16 09:57:49 +01:00
Linus Torvalds 4e3eaddd14 Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  locking: Make sparse work with inline spinlocks and rwlocks
  x86/mce: Fix RCU lockdep splats
  rcu: Increase RCU CPU stall timeouts if PROVE_RCU
  ftrace: Replace read_barrier_depends() with rcu_dereference_raw()
  rcu: Suppress RCU lockdep warnings during early boot
  rcu, ftrace: Fix RCU lockdep splat in ftrace_perf_buf_prepare()
  rcu: Suppress __mpol_dup() false positive from RCU lockdep
  rcu: Make rcu_read_lock_sched_held() handle !PREEMPT
  rcu: Add control variables to lockdep_rcu_dereference() diagnostics
  rcu, cgroup: Relax the check in task_subsys_state() as early boot is now handled by lockdep-RCU
  rcu: Use wrapper function instead of exporting tasklist_lock
  sched, rcu: Fix rcu_dereference() for RCU-lockdep
  rcu: Make task_subsys_state() RCU-lockdep checks handle boot-time use
  rcu: Fix holdoff for accelerated GPs for last non-dynticked CPU
  x86/gart: Unexport gart_iommu_aperture

Fix trivial conflicts in kernel/trace/ftrace.c
2010-03-13 14:43:01 -08:00
Dave Young e5ab67726f sysctl extern cleanup: rcu
Extern declarations in sysctl.c should be moved to their own header file,
and then include them in relavant .c files.

Move rcutorture_runnable extern declaration to linux/rcupdate.h

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Acked-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:53:08 -08:00
Paul E. McKenney 54dbf96c92 rcu: Suppress RCU lockdep warnings during early boot
RCU is used during very early boot, before RCU and lockdep have
been initialized.  So make the underlying primitives
(rcu_read_lock_held(), rcu_read_lock_bh_held(),
rcu_read_lock_sched_held(), and rcu_dereference_check()) check
for early boot via the rcu_scheduler_active flag.  This will
suppress false positives.

Also introduce a debug_lockdep_rcu_enabled() static inline
helper function, which tags the CONTINUE_PROVE_RCU case as
likely(), as suggested by Ingo Molnar.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1267631219-8713-2-git-send-email-paulmck@linux.vnet.ibm.com>
[ v2: removed incomplete debug_lockdep_rcu_update() bits ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-04 12:09:19 +01:00
Paul E. McKenney e6033e3b30 rcu: Make rcu_read_lock_sched_held() handle !PREEMPT
The rcu_read_lock_sched_held() needs to unconditionally return
the value "1" in a !PREEMPT kernel, because under !PREEMPT,
-all- kernel code is implicitly preempt-disabled.  This patch
makes this happen.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1267667418-32233-1-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-04 12:07:33 +01:00
Paul E. McKenney 0b1c87278a rcu: Make non-RCU_PROVE_LOCKING rcu_read_lock_sched_held() understand boot
Before the scheduler starts, all tasks are non-preemptible by
definition. So, during that time, rcu_read_lock_sched_held()
needs to always return "true".  This patch makes that be so
for RCU_PROVE_LOCKING=n.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1267231138-27856-2-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-27 09:53:52 +01:00
Paul E. McKenney d9f1bb6ad7 rcu: Make rcu_read_lock_sched_held() take boot time into account
Before the scheduler starts, all tasks are non-preemptible by
definition. So, during that time, rcu_read_lock_sched_held()
needs to always return "true".  This patch makes that be so.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1267135607-7056-2-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-26 08:20:46 +01:00
Paul E. McKenney 0632eb3d75 rcu: Integrate rcu_dereference_check() message into lockdep
Make rcu_dereference_check() print the list of held locks in
addition to the stack dump to ease debugging.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1266887105-1528-3-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 09:41:01 +01:00
Paul E. McKenney c26d34a585 rcu: Add lockdep-enabled variants of rcu_dereference()
Make rcu_dereference() check for being in an RCU read-side
critical section, and create rcu_dereference_bh(),
rcu_dereference_sched(), and srcu_dereference() to check for the
other flavors of RCU.  Also create rcu_dereference_raw() to
avoid checking, and make rcu_dereference_check() use
rcu_dereference_raw().

Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1266887105-1528-2-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 09:41:00 +01:00
Paul E. McKenney 632ee20013 rcu: Introduce lockdep-based checking to RCU read-side primitives
Inspection is proving insufficient to catch all RCU misuses,
which is understandable given that rcu_dereference() might be
protected by any of four different flavors of RCU (RCU, RCU-bh,
RCU-sched, and SRCU), and might also/instead be protected by any
of a number of locking primitives. It is therefore time to
enlist the aid of lockdep.

This set of patches is inspired by earlier work by Peter
Zijlstra and Thomas Gleixner, and takes the following approach:

o	Set up separate lockdep classes for RCU, RCU-bh, and RCU-sched.

o	Set up separate lockdep classes for each instance of SRCU.

o	Create primitives that check for being in an RCU read-side
	critical section.  These return exact answers if lockdep is
	fully enabled, but if unsure, report being in an RCU read-side
	critical section.  (We want to avoid false positives!)
	The primitives are:

	For RCU: rcu_read_lock_held(void)

	For RCU-bh: rcu_read_lock_bh_held(void)

	For RCU-sched: rcu_read_lock_sched_held(void)

	For SRCU: srcu_read_lock_held(struct srcu_struct *sp)

o	Add rcu_dereference_check(), which takes a second argument
	in which one places a boolean expression based on the above
	primitives and/or lockdep_is_held().

o	A new kernel configuration parameter, CONFIG_PROVE_RCU, enables
	rcu_dereference_check().  This depends on CONFIG_PROVE_LOCKING,
	and should be quite helpful during the transition period while
	CONFIG_PROVE_RCU-unaware patches are in flight.

The existing rcu_dereference() primitive does no checking, but
upcoming patches will change that.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1266887105-1528-1-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 09:40:59 +01:00
Paul E. McKenney 6ebb237bec rcu: Re-arrange code to reduce #ifdef pain
Remove #ifdefs from kernel/rcupdate.c and
include/linux/rcupdate.h by moving code to
include/linux/rcutiny.h, include/linux/rcutree.h, and
kernel/rcutree.c.

Also remove some definitions that are no longer used.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1258908830885-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-22 18:58:16 +01:00
Paul E. McKenney 2c28e2451d rcu: Fix TINY_RCU #elif condition
Some compilers are happy with "#elif CONFIG_RCU_TINY", while
others strongly prefer "#elif defined(CONFIG_RCU_TINY)".  Change
to the latter to make more compilers happy.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <12565906642768-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-27 14:59:28 +01:00
Paul E. McKenney 9b1d82fa16 rcu: "Tiny RCU", The Bloatwatch Edition
This patch is a version of RCU designed for !SMP provided for a
small-footprint RCU implementation.  In particular, the
implementation of synchronize_rcu() is extremely lightweight and
high performance. It passes rcutorture testing in each of the
four relevant configurations (combinations of NO_HZ and PREEMPT)
on x86.  This saves about 1K bytes compared to old Classic RCU
(which is no longer in mainline), and more than three kilobytes
compared to Hierarchical RCU (updated to 2.6.30):

	CONFIG_TREE_RCU:

	   text	   data	    bss	    dec	    filename
	    183       4       0     187     kernel/rcupdate.o
	   2783     520      36    3339     kernel/rcutree.o
				   3526 Total (vs 4565 for v7)

	CONFIG_TREE_PREEMPT_RCU:

	   text	   data	    bss	    dec	    filename
	    263       4       0     267     kernel/rcupdate.o
	   4594     776      52    5422     kernel/rcutree.o
	   			   5689 Total (6155 for v7)

	CONFIG_TINY_RCU:

	   text	   data	    bss	    dec	    filename
	     96       4       0     100     kernel/rcupdate.o
	    734      24       0     758     kernel/rcutiny.o
	    			    858 Total (vs 848 for v7)

The above is for x86.  Your mileage may vary on other platforms.
Further compression is possible, but is being procrastinated.

Changes from v7 (http://lkml.org/lkml/2009/10/9/388)

o	Apply Lai Jiangshan's review comments (aside from
might_sleep() 	in synchronize_sched(), which is covered by SMP builds).

o	Fix up expedited primitives.

Changes from v6 (http://lkml.org/lkml/2009/9/23/293).

o	Forward ported to put it into the 2.6.33 stream.

o	Added lockdep support.

o	Make lightweight rcu_barrier.

Changes from v5 (http://lkml.org/lkml/2009/6/23/12).

o	Ported to latest pre-2.6.32 merge window kernel.

	- Renamed rcu_qsctr_inc() to rcu_sched_qs().
	- Renamed rcu_bh_qsctr_inc() to rcu_bh_qs().
	- Provided trivial rcu_cpu_notify().
	- Provided trivial exit_rcu().
	- Provided trivial rcu_needs_cpu().
	- Fixed up the rcu_*_enter/exit() functions in linux/hardirq.h.

o	Removed the dependence on EMBEDDED, with a view to making
	TINY_RCU default for !SMP at some time in the future.

o	Added (trivial) support for expedited grace periods.

Changes from v4 (http://lkml.org/lkml/2009/5/2/91) include:

o	Squeeze the size down a bit further by removing the
	->completed field from struct rcu_ctrlblk.

o	This permits synchronize_rcu() to become the empty function.
	Previous concerns about rcutorture were unfounded, as
	rcutorture correctly handles a constant value from
	rcu_batches_completed() and rcu_batches_completed_bh().

Changes from v3 (http://lkml.org/lkml/2009/3/29/221) include:

o	Changed rcu_batches_completed(), rcu_batches_completed_bh()
	rcu_enter_nohz(), rcu_exit_nohz(), rcu_nmi_enter(), and
	rcu_nmi_exit(), to be static inlines, as suggested by David
	Howells.  Doing this saves about 100 bytes from rcutiny.o.
	(The numbers between v3 and this v4 of the patch are not directly
	comparable, since they are against different versions of Linux.)

Changes from v2 (http://lkml.org/lkml/2009/2/3/333) include:

o	Fix whitespace issues.

o	Change short-circuit "||" operator to instead be "+" in order
to 	fix performance bug noted by "kraai" on LWN.

		(http://lwn.net/Articles/324348/)

Changes from v1 (http://lkml.org/lkml/2009/1/13/440) include:

o	This version depends on EMBEDDED as well as !SMP, as suggested
	by Ingo.

o	Updated rcu_needs_cpu() to unconditionally return zero,
	permitting the CPU to enter dynticks-idle mode at any time.
	This works because callbacks can be invoked upon entry to
	dynticks-idle mode.

o	Paul is now OK with this being included, based on a poll at
the 	Kernel Miniconf at linux.conf.au, where about ten people said
	that they cared about saving 900 bytes on single-CPU systems.

o	Applies to both mainline and tip/core/rcu.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: avi@redhat.com
Cc: mtosatti@redhat.com
LKML-Reference: <12565226351355-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-26 09:40:29 +01:00
Paul E. McKenney 3d76c08290 rcu: Clean up code based on review feedback from Josh Triplett, part 3
Whitespace fixes, updated comments, and trivial code movement.

o	Fix whitespace error in RCU_HEAD_INIT()

o	Move "So where is rcu_write_lock()" comment so that it does
	not come between the rcu_read_unlock() header comment and
	the rcu_read_unlock() definition.

o	Move the module_param statements for blimit, qhimark, and
	qlowmark to immediately follow the corresponding
	definitions.

o	In __rcu_offline_cpu(), move the assignment to rdp_me
	inside the "if" statement, given that rdp_me is not used
	outside of that "if" statement.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: akpm@linux-foundation.org
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <12541491931164-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-05 21:02:02 +02:00
Paul E. McKenney 1eba8f8438 rcu: Clean up code based on review feedback from Josh Triplett, part 2
These issues identified during an old-fashioned face-to-face code
review extending over many hours.

o	Add comments for tricky parts of code, and correct comments
	that have passed their sell-by date.

o	Get rid of the vestiges of rcu_init_sched(), which is no
	longer needed now that PREEMPT_RCU is gone.

o	Move the #include of rcutree_plugin.h to the end of
	rcutree.c, which means that, rather than having a random
	collection of forward declarations, the new set of forward
	declarations document the set of plugins.  The new home for
	this #include also allows __rcu_init_preempt() to move into
	rcutree_plugin.h.

o	Fix rcu_preempt_check_callbacks() to be static.

Suggested-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: akpm@linux-foundation.org
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <12537246443924-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Peter Zijlstra <peterz@infradead.org>
2009-09-23 19:46:29 +02:00
Paul E. McKenney a71fca58b7 rcu: Fix whitespace inconsistencies
Fix a number of whitespace ^Ierrors in the include/linux/rcu*
and the kernel/rcu* files.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: akpm@linux-foundation.org
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
LKML-Reference: <20090918172819.GA24405@linux.vnet.ibm.com>
[ did more checkpatch fixlets ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-19 08:53:22 +02:00
Paul E. McKenney 16e3081191 rcu: Fix synchronize_rcu() for TREE_PREEMPT_RCU
The redirection of synchronize_sched() to synchronize_rcu() was
appropriate for TREE_RCU, but not for TREE_PREEMPT_RCU.

Fix this by creating an underlying synchronize_sched().  TREE_RCU
then redirects synchronize_rcu() to synchronize_sched(), while
TREE_PREEMPT_RCU has its own version of synchronize_rcu().

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: akpm@linux-foundation.org
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
LKML-Reference: <12528585111916-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-18 00:06:53 +02:00
Paul E. McKenney 06e799764e rcu: Remove lockdep annotations from RCU's _notrace() API members
The lockdep annotations rcu_read_acquire() and rcu_read_release()
might lead to infinite looping if called from lockdep.  So this patch
removes them.  Formal repost of http://lkml.org/lkml/2009/8/25/309
on the strength of Lai Jiangshan's review.

Suggested-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: dipankar@in.ibm.com
Cc: akpm@linux-foundation.org
Cc: josht@linux.vnet.ibm.com
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
LKML-Reference: <20090826015337.GA18904@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-26 09:45:41 +02:00
Paul E. McKenney 7c614d6461 rcu: Add "notrace" to RCU function headers used by ftrace
Both rcu_read_lock_sched_notrace() and
rcu_read_unlock_sched_notrace() are used by ftrace, and thus
need to be marked "notrace".

Unfortunately, my naive assumption that gcc would see the inner
"notrace" does not hold.

Kudos to Lai Jiangshan for noting this.

Reported-by: Ingo Molnar <mingo@elte.hu>
Bug-spotted-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: akpm@linux-foundation.org
Cc: mathieu.desnoyers@polymtl.ca
Cc: josht@linux.vnet.ibm.com
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
LKML-Reference: <12511321213243-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-24 20:37:04 +02:00
Paul E. McKenney 6b3ef48adf rcu: Remove CONFIG_PREEMPT_RCU
Now that CONFIG_TREE_PREEMPT_RCU is in place, there is no
further need for CONFIG_PREEMPT_RCU.  Remove it, along with
whatever subtle bugs it may (or may not) contain.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: akpm@linux-foundation.org
Cc: mathieu.desnoyers@polymtl.ca
Cc: josht@linux.vnet.ibm.com
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
LKML-Reference: <125097461396-git-send-email->
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-23 10:32:40 +02:00