Since sys_sysctl is deprecated start allow it to be compiled out. This
should catch any remaining user space code that cares, and paves the way
for further sysctl cleanups.
[akpm@osdl.org: If sys_sysctl() is not compiled-in, emit a warning]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There's no point to rewrite some logic to parse command line
to pass initrd parameters or to declare a user memory area.
We could use instead parse_early_param() that does the same
thing.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
There's no point to inline any functions in setup.c. Let's GCC
doing its job, it's good enough for that now.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This function although doing simple thing is hard to follow. It's
mainly due to:
- a lot of #ifdef
- bad local names
- redundant tests
So this patch try to address these issues. It also do not use
max_pfn global which is marked as an unused exported symbol.
As a bonus side, it's now really easy to see what part of the
code is for no-numa system.
There's also no point to make this function inline.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This array was used to 'cache' some frame info about scheduler
functions to speed up get_wchan(). This array was 1Ko size and
was only used when CONFIG_KALLSYMS was set but declared for all
configs.
Rather than make the array statement conditional, this patches
removes this array and its uses. Indeed the common case doesn't
seem to use this array and get_wchan() is not a critical path
anyways.
It results in a smaller bss and a smaller/cleaner code:
text data bss dec hex filename
2543808 254148 139296 2937252 2cd1a4 vmlinux-new-get-wchan
2544080 254148 143392 2941620 2ce2b4 vmlinux~old
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This patch adds 2 sanity checks.
The first one test that the start address of the function to analyze has been
set by the caller. If not return an error since nothing usefull can be done
without.
The second one checks that the function's size has been set. A null size can
happen if CONFIG_KALLSYMS is not set and it means that we don't know the size
of the function to analyze. In this case, we make it equal to 128 instructions
by default.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
While working on a glibc patch to support the fstatat() functions[1],
I noticed that the o32 implementation behaves differently on 32-bit and
64-bit kernels; the former provides a stat64 while the latter provides
a plain (o32) stat. I think the former is what's intended, as there is
no separate fstatat64. It's also what x86 does.
I think this is just a case of a compat too far.
[1] I've seen Khem's patch, but I don't think it's right.
Signed-off-by: Richard Sandiford <richard@codesourcery.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This patch introduces a number of configuration variables. These allow to
specify presence/absence of integrated peripherals found on the MIPS
RM9xxx processor family, based on the particular processor model used.
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
excite_fpga.h, like all platform headers, really belongs in the
platform header directory.
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The excite platform exports hardware resources for device drivers to use.
Any driver wanting to use these resources will look up them by their names.
Since these resources are declared to have static linkage, but are not
used in the source file defining them, the compiler used to emit an
'unused' warning, which this patch suppresses.
Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
With more recent compilers inline doesn't necessarily means a function
will always be inlined. So leave that decission to the compiler and
make the function as __init.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The following change updates the Atlas interrupt handling to match that
of Malta. Tested with a 5Kc and a 34Kf successfully.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In hooking up the perf counter overflow interrupt to the experimental
deprecated-real-soon-now /proc/perf interface last night, I had to
revisit arch/mips/mips-boards/generic/time.c, and discovered that
when the 2.6.9-based SMTC prototype was merged with the more
recent tree, it was missed that arch/mips/kernel/time.c had changed
so that even in SMP kernels, timer_interrupt() calls
local_timer_interrupt(), so there is no longer a need to invoke it
directly from mips_timer_interrupt() in those cases where
timer_interrupt() has been called. So I got rid of that, and added the
invocation of perf_irq() if Cause.PCI is set, more-or-less following the
same logic as in the non-SMTC case, with the modifications that (a) a
runtime check for Release 2 isn't done, because it's redundant in SMTC),
and (b) we check for a clock interrupt regardless of the value returned
by the perf counter service - I don't understand why we'd want to control
that with perf_irq(), but maybe one of you knows the story. I also got
rid of the stupid warning about the unused variable when compiled for
SMTC (another artifact of the merge). The result hasn't been beaten to
death, but boots, seems stable, and supports extended precision event
counting.
Signed-off-by: Kevin D. Kissell <kevink@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
If a thread became runnable between need_resched() and the WAIT
instruction, switching to the thread will delay until a next interrupt.
Some CPUs can execute the WAIT instruction with interrupt disabled, so
we can get rid of this race on them (at least UP case).
Original Patch by Atsushi with fixing up for MIPS Technology's cores by
Ralf based on feedback from the RTL designers.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
I've encountered a serious problem with PCI config space access on Au1x000
platforms with recent 2.6.x-kernel. With 2.4.31 the same hardware works fine.
So I was looking for the differences:
Symptoms:
- no PCI-device is seen on bootup though two or three cards are present
- lspci output is empty
- OR: lspci shows 20 times the same device
(- OR: in some slot-configurations it worked anyhow)
System(s):
1. platform with Au1500 and three PCI-devices (actually a mycable XXS1500
with backplane for three PCI-devices)
2. platform with Au1550 and two PCI-devices (custom board)
Debugging:
I digged down to the config_access() of the au1xxx-processors in
arch/mips/pci/ops-au1000.c and switched on DEBUG.
The code of config_access() seems to be almost the same as of the
2.4.x-kernel. But the "pci_cfg_vm->addr" returned by get_vm_area(0x2000, 0)
once on booting is different. That's of course not forbidden. But the
alignment seems to be wrong. In my case, I received:
2.4.31: pci_cfg_vm->addr = c0000000
2.6.18-rc5: pci_cfg_vm->addr = c0101000
To make it short: With 2.6.x it fails on the first config-access with:
"PCI ERR detected: status 83a00356".
Fixup:
My fix is now, to use the VM_IOREMAP-flag in the get_vm_area call. This flag
seems to be introduced in mm/vmalloc.c a long time ago (in 2.6.7-bk13, I
found in gitweb).
Now, the returned address is pci_cfg_vm->addr = c0104000 and everything works
fine.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Since lmo commit 323a380bf9e1a1679a774a2b053e3c1f2aa3f179 ("Simplify
dump_stack()") made prepare_frametrace() always inlined, using $2 (v0)
in __asm__ is not safe anymore. We can use $1 (at) instead. Also we
should use "dla" instead of "la" for 64-bit kernel.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
c-r4k.c and c-sb1.c use drop_mmu_context() to flush virtually tagged
I-caches, but this does not work for flushing other task's icache. This
is for example triggered by copy_to_user_page() called from ptrace(2).
Use indexed flush for such cases.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
XTC can only be set if VPA is clear, which it may not be. There is
also the possibility of a back to back c0 register access hazard to
take care of.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
dclz() expects its 64-bit argument being passed as a single register
but on 32-bit kernels it'll actually be in a register pair.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In entry.S resume_userspace ... jal do_notify_resume form a loop through
which the kernel will iterate as long as work is pending. If we
iterate through this loop more than once with no signal pending for at
least one but the last iteration we will take do the syscall restarting
multiple times resulting in a syscall return prior to the the syscall
instruction in userspace. This may happen when debugging a multithreaded
program.
Debugging and original fix by Maciej; extended to other ABIs by me.
Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Recent 34Ks come out of reset with WP enabled on VPE 1 so we take an
immediate exception when starting the second VPE.
Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This patch allows unwind_stack() to return ra for leaf function.
But it tries to detects cases where get_frame_info() wrongly
consider nested function as a leaf one.
It also pass 'unsinged long *sp' instead of 'unsigned long **sp'
as second parameter. The code looks cleaner.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Now get_frame_info() wants to detect move sp instruction first. It
assumes that the save ra in the stack instruction can't happen
before allocating frame size space into the stack.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Make dump_stack() code not depend on CONFIG_KALLSYMS.
It also make prepare_frametrace() always inlined to get
less false entries reported by show_raw_backtrace().
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
We usually use backtrace term for dumping a call tree during
debug. Therefore this patch renames show_frametrace() into
show_backtrace() and show_trace() into show_raw_backtrace().
It also uses the new function print_ip_sym().
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Eric W. Biederman