Commit Graph

7557 Commits

Author SHA1 Message Date
Hans de Goede a0001a289f V4L/DVB (11972): gspca - main: Skip disabled controls.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:44 -03:00
Hans de Goede 49809d6a51 V4L/DVB (11970): gspca - ov519: Add support for the ov518 bridge.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:42 -03:00
Jean-Francois Moine 253f13d5cd V4L/DVB (11969): gspca - spca505: Reinitialize the webcam at resume time.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:42 -03:00
Hans Verkuil df59f0b3df V4L/DVB (11967): v4l: i2c modules must be linked before the v4l2 drivers
Since i2c autoprobing is no longer supported by v4l2 we need to make sure
that the i2c modules are linked before the v4l2 modules. The v4l2 modules
now rely on the presence of the i2c modules, so these must have initialized
themselves before the v4l2 modules.

The exception is the ir-kbd-i2c module, which is the only one still using
autoprobing. This one should be loaded at the end of the v4l2 module. Loading
it earlier actually causes problems with tveeprom. Once ir-kbd-i2c is no
longer autoprobing, then it has to move up as well.

This is only an issue when everything is compiled into the kernel.

Thanks to Marcus Swoboda for reporting this and Udo Steinberg for testing
this patch.

Tested-by: Udo A. Steinberg <udo@hypervisor.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:41 -03:00
Mauro Carvalho Chehab 163fe744c3 V4L/DVB (11966): ov511: Fix unit_video parameter behavior
Fix a regression caused by changeset 9133:64aed7485a43 - v4l: disconnect
kernel number from minor

Before the above changeset, ov511_probe used to allow forcing to use a
certain specific set of video devices, like:

modprobe ov511 unit_video=4,1,3 num_uv=3

So, assuming that you have 5 ov511 devices, and connect they one by one,
they'll gain the following device numbers (at the connection order):
/dev/video4
/dev/video1
/dev/video3
/dev/video0
/dev/video2

However, this was changed due to this change at video_register_device():

+ nr = find_next_zero_bit(video_nums[type], minor_cnt, nr == -1 ? 0 : nr);

With the previous behavior, a trial to register on an already allocated mirror
would fail, and a loop would get the next requested minor. However, the current
behavior is to get the next available minor instead of failing. Due to that,
this means that the above modprobe parameter will give, instead:

/dev/video5
/dev/video6
/dev/video7
/dev/video8
/dev/video9

In order to restore the original behavior, a static var were added,
storing the amount of already registered devices.

While there, it also fixes the locking of the probe/disconnect functions.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:40 -03:00
Trent Piepho eccd15aad7 V4L/DVB (11964): b2c2: Fix problems with frontend attachment
The frontend attachment code didn't handle cases where the frontend
partially failed to attach.  For instance, when the demod was attached
successfully but the tuner driver wasn't compiled or fails to init for some
reason.  In these cases we try to clean up the partial attachment and fail
instead of proceeding with a broken frontend.

If frontend registration fails, clean up with dvb_frontend_detach() rather
than just calling the frontend's main release method.  The former does some
additional stuff, like release an attached tuner and take care of putting
symbols when dynamic binding is used.

In skystar2_rev23_attach() it's not necessary to set fc->dev_type, that
gets set before skystar2_rev23_attach() is called.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:40 -03:00
Roel Kluin 76b0811645 V4L/DVB (11961): tvp514x: try_count off by one
With `while (try_count-- > 0)' try_count reaches -1 after the loop.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:39 -03:00
Lennart Poettering bcd3e4b319 V4L/DVB (11960): v4l: generate KEY_CAMERA instead of BTN_0 key events on input devices
A bunch of V4L drivers generate BTN_0 instead of KEY_CAMERA key presses.

X11 is able to handle KEY_CAMERA automatically these days while BTN_0 is
not treated at all.  Thus it would be of big benefit if the camera drivers
would consistently generate KEY_CAMERA.  Some drivers (uvc) already do,
this patch updates the remaining drivers to do the same.

I only possess a limited set of webcams, so this isn't tested with all
cameras.  The patch is rather trivial and compile tested, so I'd say it's
still good enough to get merged.

Signed-off-by: Lennart Poettering <mzxreary@0pointer.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:38 -03:00
Alan Cox 6f4d72392d V4L/DVB (11959): se401: Fix unsafe use of sprintf with identical source/destination
Closes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=13435

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:37 -03:00
Figo.zhang 5e2c217eee V4L/DVB (11958): usbvision-core.c: vfree does its own NULL check
vfree() does it's own NULL checking,so no need for check before
calling it.

Signed-off-by: Figo.zhang <figo1802@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:37 -03:00
Alexey Klimov f1ca0adfcf V4L/DVB (11957): dsbr100: change radio->muted to radio->status, update suspend/resume
Patch renames radio->muted to radio->status, add defines for that
variable, and fixes suspend/resume procedure. Radio->status set to
STOPPED in usb_dsbr100_probe because of removing open call.
Also, patch increases driver version.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:36 -03:00
Alexey Klimov 917fab4f3e V4L/DVB (11956): dsbr100: no need to pass curfreq value to dsbr100_setfreq()
Small cleanup of dsbr100_setfreq(). No need to pass radio->curfreq value
to this function.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:36 -03:00
Alexey Klimov a617e0e8c7 V4L/DVB (11955): dsbr100: remove usb_dsbr100_open/close calls
Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:35 -03:00
Alexey Klimov 6f094eb9a8 V4L/DVB (11954): dsbr100: remove radio->users counter
Patch removes radio->users counter because it is not in use.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:34 -03:00
Figo.zhang 92051b285b V4L/DVB (11953): videobuf-dma-sg: return -ENOMEM if vmalloc fails
it is better return -ENOMEM than -EIO

Signed-off-by: Figo.zhang <figo1802@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:34 -03:00
Andy Walls 8bb09db375 V4L/DVB (11951): cx18: Add DVB-T support for the Leadtek WinFast DVR3100 H
This adds support for DVB-T on the Leadtek DVR3100 H and should also get analog
TV capture from the tuner working properly as well.

DVB-T 6 MHz and 8 MHz have been tested and verified to work by Terry Wu of
Leadtek.  DVB-T 7 MHz has also been verified working with a change developed by
Terry to the tuner-xc2028.c driver.

Special thanks go to Terry Wu <terrywu2009@gmail.com> of Leadtek who provided
the needed information and testing to get digital TV working for the Leadtek
DVR3100 H.

Reported-by: Terry Wu <terrywu2009@gmail.com>
Tested-by: Terry Wu <terrywu2009@gmail.com>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:33 -03:00
Andy Walls 9d5af86292 V4L/DVB (11950): cx18: Split LeadTek PVR2100 and DVR3100 H into 2 separate card entries
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:33 -03:00
Laurent Pinchart 3b27740c7d V4L/DVB (11948): uvcvideo: Ignore non-UVC trailing interface descriptors.
Herton Ronaldo Krzesinski from Mandriva reported that one Bison Electronics
webcam exposes a non-UVC interface descriptor. Instead of failing completely,
ignore trailing non-UVC descriptors and move on.

Thanks to Herton for reporting the problem and submitting a patch proposal.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:32 -03:00
Laurent Pinchart ca4a345685 V4L/DVB (11947): uvcvideo: Add support for FSC V30S webcams
The FSC WebCam V30S (18ec:3288) requires the MINMAX quirk. Add a corresponding
entry in the device IDs list.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:31 -03:00
Laurent Pinchart 2d2bf2a3a6 V4L/DVB (11946): uvcvideo: Add support for Aveo Technology webcams
The Aveo Technology USB 2.0 Camera (1871:0306) requires the
PROBE_EXTRAFIELDS quirk. Add a corresponding entry in the device IDs list.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:31 -03:00
Laurent Pinchart 23ff6043ad V4L/DVB (11945): uvcvideo: Don't accept to change the format when buffers are allocated.
Setting a new frame format or size will likely change the buffer size required
to store a complete video frame. To avoid a buffer overflow, don't allow
VIDIOC_S_FMT calls when video buffers are already allocated.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:30 -03:00
Laurent Pinchart d732c44c1a V4L/DVB (11944): uvcvideo: Add generic control blacklist.
Another device (5986:0241) has been reported to advertise a UVC control it
does not support. Rework the control blacklist to match devices by their
VID:PID instead of trying to be clever about which controls might not be
supported properly.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:29 -03:00
Erik Andrén 926b3b4122 V4L/DVB (11942): gspca - m5602-ov9650: Reorder quirk list and add A7V quirk
The quirk list has grown and was in need of sorting. This is now done. Add a new vflip quirk for the ASUS A7V while we're at it. Thanks to Carsten Menzel for reporting.

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:29 -03:00
Erik Andrén 40a4f2fc65 V4L/DVB (11941): gspca - m5602-ov9650: Add vflip quirk for the ASUS A6VA
Add vflip quirk for the ASUS A6VA. Thanks to Salvo Di Rosa for reporting.

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:28 -03:00
Erik Andrén f02c3944c1 V4L/DVB (11940): gspca - m5602-s5k4aa: Add vflip quirk for the Lenovo Y300
The Lenovo Y300 has its sensor upside down. Quirk it to gain normal functionality.

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:28 -03:00
Dmitri Belimov 6b6b75432c V4L/DVB (11938): big rework of TS for saa7134
1. Add start/stop TS function.
2. Move setup DMA of TS to DMA function.
3. Write support cupture via MMAP
4. Rework startup and finish process, remove simple FSM.

Tested-by: Hermann Pitton <hermann-pitton@arcor.de>
Tested-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Alexey Osipov <lion-simba@pridelands.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:27 -03:00
FUJITA Tomonori 028bbfedcc V4L/DVB (11937): vino: replace dma_sync_single with dma_sync_single_for_cpu
This replaces dma_sync_single() with dma_sync_single_for_cpu() because
dma_sync_single() is an obsolete API; include/linux/dma-mapping.h says:

/* Backwards compat, remove in 2.7.x */

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:26 -03:00
Randy Dunlap ef5b5168e5 V4L/DVB (11936): Fix v4l2-device usage of i2c_unregister_device()
Fix v4l2-device usage of i2c_unregister_device() and handle the case of
CONFIG_I2C=m & CONFIG_MEDIA_VIDEO=y.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:26 -03:00
Dmitri Belimov 436ae1381e V4L/DVB (11934): Change order for FM tune
Change order data of buffer in FM simple_tune function. It is usefull for:

1. Set data of tuner with CP bit UP. 0xCE for MK5 or 0xC6 for MK3
2. When call simple_fm_tune, read this byte from config and overwrite
this byte in function simple_radio_bandswitch for set CP bit to OFF.

Of course it can be usefull for other tuner for overwrite default
settings of FM.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:25 -03:00
Andy Walls 5ddc9b100f V4L/DVB (11933): tuner-simple, tveeprom: Add Philips FQ1216LME MK3 analog tuner
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:25 -03:00
Andy Walls 7360055aa3 V4L/DVB (11932): ivtv: Add missing newline
Reported-by: Martin Dauskardt <martin.dauskardt@gmx.de>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:24 -03:00
Andy Walls 3cd5270c41 V4L/DVB (11931): lnbp21: Add missing newline
Reported-by: VDR User <user.vdr@gmail.com>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:23 -03:00
Abylay Ospan 0d834635a3 V4L/DVB (11930): TS continuity check: show error message when discontinuity detected or TEI flag detected in header
Signed-off-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:23 -03:00
Devin Heitmueller d6a9a430a6 V4L/DVB (11928): au0828: provide module option to disable USB speed check
Add an au0828 module option that allows a user to override the USB speed check.
Intended for advanced users who understand the consequences of trying to use
the device with a 12Mbps bus.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:22 -03:00
Devin Heitmueller e2a1b79f7d V4L/DVB (11927): em28xx: provide module option to disable USB speed check
Add an em28xx module option that allows a user to override the USB speed check.
Intended for advanced users who understand the consequences of trying to use
the device with a 12Mbps bus.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:22 -03:00
Devin Heitmueller 0f9fba3129 V4L/DVB (11926): tuner-core: fix warning introduced when cleaning up xc5000 init routine
This patch removes some remaining dead code.  Warning showed up in Hans
Verkuil's daily report after I committed hg changeset 7f2eea75118b.

Thanks to Michael Krufky for bringing the warning to my attention.

Cc: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:21 -03:00
Devin Heitmueller 3ed58baf5d V4L/DVB (11925): em28xx: Add support for the K-World 2800d
Make the KWorld 2800d work properly.  In this case, that means making the
profile more generic so that it works for both the Pointnix Intra-Oral USB
camera and the KWorld device.

The device provides the audio through a pass-thru cable, so we don't need
an actual audio capture profile (neither the K-World device nor the Pointnix
have an onboard audio decoder).

Thanks to Paul Thomas for providing sample hardware.

Cc: Paul Thomas <pthomas8589@gmail.com>
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:20 -03:00
Devin Heitmueller ee3436b828 V4L/DVB (11924): au0828: Don't let device work unless connected to a high speed USB port
The au0828 basically just doesn't work at 12 Mbps.  The isoc pipe needs
nearly 200 Mbps for analog support, so users would see garbage video, and on
the DVB/ATSC side scanning is likely to work but if the user tried to tune it
would certainly appear to have failed.

It's better to fail explicity up front and tell the user to plug into a USB 2.0
port, than to let the driver load and the user have weird problems with tuning
and garbage video.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:20 -03:00
Devin Heitmueller 64a00b43e6 V4L/DVB (11923): em28xx: Don't let device work unless connected to a high speed USB port
The em28xx basically just doesn't work at 12 Mbps.  The isoc pipe needs
nearly 200 Mbps for analog support, so users would see garbage video, and on
the DVB/ATSC side scanning is likely to work but if the user tried to tune it
would certainly appear to have failed.

It's better to fail explicity up front and tell the user to plug into a USB 2.0
port, than to let the driver load and the user have weird problems with tuning
and garbage video.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:19 -03:00
Mauro Carvalho Chehab e2860d9621 V4L/DVB (11922): tuner-xc2028: cleanup: better use tuner type defines
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:18 -03:00
Mauro Carvalho Chehab 0a863975e2 V4L/DVB (11918): tuner-xc2028: Fix offset frequencies for DVB @ 6MHz
Both ATSC and DVB @ 6MHz bandwidth require the same offset.

While we're fixing it, let's cleanup the bandwidth setup to better
reflect the fact that it is a function of the bandwidth.

Thanks to Terry Wu <terrywu2009@gmail.com> for pointing this issue and
to Andy Walls <awalls@radix.net> for an initial patch for this fix.

Cc: Terry Wu <terrywu2009@gmail.com>
Acked-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:18 -03:00
Mauro Carvalho Chehab a1014d70db V4L/DVB (11917): Fix firmware load for DVB-T @ 6MHz bandwidth for xc3028/xc3028L
The only two countries that are known to use 6MHz bandwidth are Taiwan
and Uruguay. Both use QAM subcarriers at OFTM.

This patch fixes the firmware load for such countries, where the
required firmware is the QAM one.

This also confirms the previous tests where it was noticed that the 6MHz
QAM firmware doesn't work for cable. So, this patch also removes support
for DVB-C, instead of just printing a warning.

Thanks to Terry Wu <terrywu2009@gmail.com> for pointing this issue and
to Andy Walls <awalls@radix.net> for an initial patch for this fix.

Cc: Terry Wu <terrywu2009@gmail.com>
Acked-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:17 -03:00
Antti Palosaari 22d4645311 V4L/DVB (11915): af9015: support for Genius TVGo DVB-T03
Add USB ID (0458:4012) for Genius TVGo DVB-T03.
Thanks to Petr Vodicka <vodicka.petr@email.cz> for reporting and testing.

Tested-by: Petr Vodicka <vodicka.petr@email.cz>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 19:07:17 -03:00
Andy Walls 9ad4c6551b V4L/DVB (11898): cx18: Perform 64 bit divide so it works for 32 bit systems
Thanks to David Ward and Mike Krufky for reporting the problem and
debugging this as an unresolved symbol due to a 64 bit divide on a 32 bit
system.  David Ward provided the content of this patch; Andy Walls only
performed some cosmetic edits.

Reported-by: David Ward <david.ward@gatech.edu>
Signed-off-by: David Ward <david.ward@gatech.edu>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:16 -03:00
Robert Krakora 75c74d1c78 V4L/DVB (11896): em28xx: Fix for Slow Memory Leak
Test Code:  (Provided by Douglas)

v4l-dvb/v4l2-apps/test/stress-buffer.c

The audio DMA area was never being freed and would slowly leak over
time as the v4l device was opened and closed by an application.

Thanks again to Douglas for generating the test code to help locate
memory leaks!!!

Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:16 -03:00
Filipe Rosset f41b696156 V4L/DVB (11895): bt8xx: remove always false if
Remove always false if over unsigned int variable

Signed-off-by: Filipe Rosset <rosset.filipe@gmail.com>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:16 -03:00
Randy Dunlap ab482a6c18 V4L/DVB (11881): one kconfig controls them all
Add a kconfig symbol that allows someone to disable all
multimedia config options at one time.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:16 -03:00
David Wong 493b7127aa V4L/DVB (11880): cx23885: support for card Mygica X8506 DMB-TH
This patch add cx23885 support for card "Mygica X8506 DMB-TH".
It should work on "Magic-Pro ProHDTV Extreme" as well, as they are
same hardware with different branding.

Sign-off-by: David T.L. Wong <davidtlwong@gmail.com>

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:15 -03:00
Miroslav Sustek 3047a17639 V4L/DVB (11879): Adds support for Leadtek WinFast DTV-1800H
Enables analog/digital tv, radio and remote control (gpio).

Tested-by: Marcin Wojcikowski <emtees.mts@gmail.com>
Tested-by: Karel Juhanak <karel.juhanak@warnet.cz>
Tested-by: Andrew Goff <goffa72@gmail.com>
Tested-by: Jan Novak <novak-j@seznam.cz>
Signed-off-by: Miroslav Sustek <sustmidown@centrum.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:15 -03:00
Hans de Goede 9035f2e27a V4L/DVB (11872): gspca - spca561: Rename the 'White Balance' control to 'Hue'.
Binary files /home/v4l/tokernel/oldtree/Documentation/video4linux/v4lgrab.o and /home/v4l/tokernel/linux/Documentation/video4linux/v4lgrab.o differ

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:15 -03:00
Hans de Goede d0848eb286 V4L/DVB (11871): gspca - spca561: Change the Rev12a controls.
- Extend the gain range
- Adjust the exposure
- Remove the broken autogain

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:15 -03:00
Jean-Francois Moine 191d0e7fba V4L/DVB (11869): gspca - ov534: JPEG 320x240 and 640x480 formats for ov965x.
The YUYV 640x480 format did not work with ov965x.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:15 -03:00
Jean-Francois Moine 7880f66138 V4L/DVB (11868): gspca - spca508: Optimize code.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:15 -03:00
Jean-Francois Moine 1af63b3d1d V4L/DVB (11867): gspca - spca508: Cleanup source and update copyright.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:14 -03:00
Andy Walls 86bc85b386 V4L/DVB (11865): cx18: Tweak color burst gate delay and initial color sub-carrier freq
Fix the burst gate delays to use a crystal value of 28636360 as assumed by
the rest of the driver.  Also have the initial color sub-carrier freq paramter
use the src decimation ratio per the documentation, instead of the actual
crystal/pixel clock ratio.  The tracking circuit will find the correct color
subcarrier in any case, as long as we're close.  Also fix up some debug print
statements.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:14 -03:00
Andy Walls 929a3ad152 V4L/DVB (11864): cx18: Complete support for Sliced and Raw VBI for 625 line systems
Finish changes for sliced and raw VBI for 625 line systems.  Tested with VPS
and WSS being emitted by a PVR-350 in field 1 lines 16 and 23.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:14 -03:00
Andy Walls 5ab740522f V4L/DVB (11863): cx18: Initial attempt to get sliced VBI working for 625 line systems
Initial changes to get sliced VBI for 625 line system working.  This is patch
is untested.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:14 -03:00
Michael Krufky 1bc7f51c57 V4L/DVB (11861): saa7134: enable digital tv support for Hauppauge WinTV-HVR1110r3
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:14 -03:00
Michael Krufky b9dcdb6fb8 V4L/DVB (11860): saa7134: fix quirk in saa7134_i2c_xfer for the saa7131 bridge
The i2c quirk in the saa7134_i2c_xfer function does a bogus write
to i2c address 0xfd, to work around a bug in the silicon that
affects read transactions.

Unfortunately, this hack is not working properly, since the bogus
write is to 0xfd, an invalid i2c address.  Fix this quirk by using
an actual valid i2c address, 0xfe, which is still unlikely to be
used as an i2c address for any actual i2c client.

This is required in order to properly communicate with a TDA10048
DVB-T demod located at i2c address 0x10 on the primary i2c bus.

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:14 -03:00
Michael Krufky c27586e4d6 V4L/DVB (11858): cx23885: fix tda10048 IF frequencies for the Hauppauge WinTV-HVR1210
Steve missed the HVR1210 config struct for the TDA10048 in his IF freq patch.

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:13 -03:00
Steven Toth a884c63cae V4L/DVB (11857): TDA10048: Missing two I/F's / Pll combinations from the PLL table
This was causing a lock failure in Australia.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:13 -03:00
Steven Toth 08b83583dc V4L/DVB (11856): pvrusb2: Ensure we specify I/F's for all bandwidths
pvrusb2: Ensure we specify I/F's for all bandwidths

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:13 -03:00
Steven Toth 8816bef53c V4L/DVB (11855): cx23885: Ensure we specify I/F's for all bandwidths
cx23885: Ensure we specify I/F's for all bandwidths

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:13 -03:00
Steven Toth 9e08199770 V4L/DVB (11854): TDA10048: Ensure the I/F changes during DVB-T 6/7/8 bandwidth changes.
TDA10048: Ensure the I/F changes during DVB-T 6/7/8 bandwidth changes.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:13 -03:00
figo.zhang 6ecdf92d21 V4L/DVB (11853): minor have assigned value twice
The variable minor have assigned value twice, the first time is in the
initial "video_device" data struct in those drivers, pls see
saa7134-video.c,line 2503.

 ---

Signed-off-by: Figo.zhang <figo.zhang@kolorific.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:13 -03:00
figo.zhang 4a567394dc V4L/DVB (11852): saa7134-video.c: poll method lose race condition
saa7134-video.c: poll method lose race condition

Signed-off-by: Figo Zhang <figo.zhang@kolorific.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:12 -03:00
Dean Anderson 7d8535329c V4L/DVB (11851): patch: s2255drv: adding V4L2_MODE_HIGHQUALITY
Adding V4L2_MODE_HIGHQUALITY feature.

Signed-off-by: Dean Anderson <dean@sensoray.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:12 -03:00
Filipe Rosset 849a3aba2d V4L/DVB (11838): uvcvideo: Add Lenovo Thinkpad SL400 to device list comments
Update the 17ef:480b device comment to list Lenovo Thinkpad SL400.

Signed-off-by: Filipe Rosset <rosset.filipe@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:12 -03:00
Jean Delvare 7e11118592 V4L/DVB (11850): pvrusb2: Instantiate ir_video I2C device by default
Now that the ir-kbd-i2c driver has been converted to a new-style i2c
driver, we can instantiate the ir_video I2C device by default. The
pvr2_disable_ir_video is kept to disable the IR receiver, either
because the user doesn't use it, or for debugging purpose.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:12 -03:00
Jean Delvare 20b0ead5fd V4L/DVB (11849): ivtv: Probe more I2C addresses for IR devices
Probe I2C addresses 0x71 and 0x6b for IR receiver devices (for the
PVR150 and Adaptec cards, respectively.)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:12 -03:00
Jean Delvare d9a88e632b V4L/DVB (11848): saa7134: Simplify handling of IR on AVerMedia Cardbus E506R
Now that we instantiate I2C IR devices explicitly, we can skip probing
altogether on boards where the I2C IR device address is known. The
AVerMedia Cardbus E506R is one of these boards.

Tested-by: Oldrich Jedlicka <oldium.pro@seznam.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:12 -03:00
Jean Delvare ec218a412b V4L/DVB (11847): saa7134: Simplify handling of IR on MSI TV@nywhere Plus
Now that we instantiate I2C IR devices explicitly, we can skip probing
altogether on boards where the I2C IR device address is known. The MSI
TV@nywhere Plus is one of these boards.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:11 -03:00
Jean Delvare 9a4cc5ac99 V4L/DVB (11846): ir-kbd-i2c: Don't assume all IR receivers are supported
The code in ir_probe makes the dangerous assumption that all IR
receivers are supported by the driver. The new i2c model makes it
possible for bridge drivers to instantiate IR devices before they are
supported, therefore the ir-kbd-i2c drivers must be made more robust
to not spam the logs or even crash on unsupported IR devices. Simply,
the driver will not bind to the unsupported devices.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:11 -03:00
Jean Delvare 4d7a2d6721 V4L/DVB (11845): ir-kbd-i2c: Use initialization data
For specific boards, pass initialization data to ir-kbd-i2c instead
of modifying the settings after the device is initialized. This is
more efficient and easier to read.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:11 -03:00
Jean Delvare c668f32dca V4L/DVB (11844): ir-kbd-i2c: Switch to the new-style device binding model
Let card drivers probe for IR receiver devices and instantiate them if
found. Ultimately it would be better if we could stop probing
completely, but I suspect this won't be possible for all card types.

There's certainly room for cleanups. For example, some drivers are
sharing I2C adapter IDs, so they also had to share the list of I2C
addresses being probed for an IR receiver. Now that each driver
explicitly says which addresses should be probed, maybe some addresses
can be dropped from some drivers.

Also, the special cases in saa7134-i2c should probably be handled on a
per-board basis. This would be more efficient and less risky than always
probing extra addresses on all boards. I'll give it a try later.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:11 -03:00
Jean Delvare 1df8e9861c V4L/DVB (11843): ir-kbd-i2c: Don't use i2c_client.name for our own needs
In the standard device driver binding model, the name field of
struct i2c_client is used to match devices to their drivers, so we
must stop using it for internal purposes. Define a separate field
in struct IR_i2c as a replacement, and use it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:11 -03:00
Alessio Igor Bogani 24c44d8511 V4L/DVB (11842): radio-mr800.c: missing mutex include
radio-mr800.c uses struct mutex, so while <linux/mutex.h> seems to be
pulled in indirectly by one of the headers it already includes, the right
thing is to include it directly.

Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Alexey Klimov <klimov.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:10 -03:00
Simon Arlott eda9f7523b V4L/DVB (11841): core: fix potential mutex_unlock without mutex_lock in dvb_dvr_read
dvb_dvr_read may unlock the dmxdev mutex and return -ENODEV, except this
function is a file op and will never be called with the mutex held.

There's existing mutex_lock and mutex_unlock around the actual read but
it's commented out.  These should probably be uncommented but the read
blocks and this could block another non-blocking reader on the mutex
instead.

This change comments out the extra mutex_unlock.

[akpm@linux-foundation.org: cleanups, simplification]
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:10 -03:00
Cohen David.A 1010ed1327 V4L/DVB (11840): change kmalloc to vmalloc for sglist allocation in videobuf_dma_map/unmap
Change kmalloc()/kfree() to vmalloc()/vfree() for sglist allocation
during videobuf_dma_map() and videobuf_dma_unmap()

High resolution sensors might require too many contiguous pages
to be allocated for sglist by kmalloc() during videobuf_dma_map()
(i.e. 256Kib for 8MP sensor).
In such situations, kmalloc() could face some problem to find the
required free memory. vmalloc() is a safer solution instead, as the
allocated memory does not need to be contiguous.

Signed-off-by: David Cohen <david.cohen@nokia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:10 -03:00
Laurent Pinchart 04a37e0f32 V4L/DVB (11837): uvcvideo: Start status polling on device open
Most UVC camera include an interrupt endpoint to report control value changes,
video streaming errors and camera button events. The USB controller
continuously polls the interrupt endpoint to retrieve such events. This
prevents the device from being auto-suspended, and thus consumes power.

Reporting video streaming errors don't make sense when the V4L2 device is
closed. Control value changes are probably useless as well if nobody listens to
the events, although caching will probably have to be completely disabled then.
No polling is thus be required when /dev/videoX is not opened.

To enable auto-suspend and save power do not poll the interrupt endpoint until
the device is open. We lose the ability to detect button events if no
application is using the camera.

http://bugzilla.kernel.org/show_bug.cgi?id=11948

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:10 -03:00
Laurent Pinchart b2d9cc4226 V4L/DVB (11836): uvcvideo: Add missing whitespaces to multi-line format strings.
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:10 -03:00
Laurent Pinchart 078f894792 V4L/DVB (11835): uvcvideo: Parse frame descriptors with non-continuous indexes.
The UVC specification requires frame descriptors indexes to range from 1 to
the number of frame descriptors. At least some Hercules Dualpix Infinite
webcams erroneously use non-continuous index ranges. Make the driver support
them.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:10 -03:00
Alan Nisota 86cf5f84e6 V4L/DVB (11833): dvb-usb: Remove support for Genpix-CW3K (damages hardware)
I have been informed by the manufacturer that the patch currently in the v4l tree to support the Genpix-CW3K version of the hardware will actually
damage the firmware on recent units.  As he seems to not want this hardware supported in Linux, and I do not know how to detect the difference between
affected and not-affected units, I am requesting the immediate removal of support for this device.  This patch removes a portion of the changeset
dce7e08ed2b1 applied 2007-08-18 relating to this specific device.

Adapted patch to not remove code, but to only to comment it out.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:09 -03:00
matthieu castet 81dae6716f V4L/DVB (11832): dibusb_mc: fix i2c to not corrupt eeprom in case of strange read pattern
dibusb_i2c_xfer seems to do things very dangerous :
it assumes that it get only write/read request or write request.

That means that read can be understood as write. For example a program
doing
file = open("/dev/i2c-x", O_RDWR);
    ioctl(file, I2C_SLAVE, 0x50)
read(file, data, 10)
    will corrupt the eeprom as it will be understood as a write.

Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:09 -03:00
Patrick Boettcher a9b8fe30a6 V4L/DVB (11831): dib0700: added USB IDs for Terratec T3 and T5
This patch adds the USB IDs for the Terratec devices T3 and T5.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:09 -03:00
tomas petr f0f4ae763b V4L/DVB (11830): dib0700: add support for Leadtek WinFast DTV Dongle H
"Leadtek WinFast DTV Dongle H" is a hybrid digital/analog USB-stick TV
receiver. The code below allows the digital part to work with dvb_usb
in linux.

Signed-off-by: tomas petr <tom-petr@seznam.cz>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:09 -03:00
Patrick Boettcher d66b94b4aa V4L/DVB (11829): Rewrote frontend-attach mechanism to gain noise-less deactivation of submodules
This patch is reorganizing the frontend-attach mechanism in order to
gain noise-less (superflous prints) deactivation of submodules.

Credits go to Uwe Bugla for helping to clean and test the code.

Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:09 -03:00
Matthias Schwarzott 302e8acc41 V4L/DVB (11828): Reducing print-level of I2C error prints
Reducing the print-levle of I2C error prints cleans some unwanted but
unavoidable errors from default syslog-level.

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:09 -03:00
Mauro Carvalho Chehab 766ed64de5 V4L/DVB (11827): Add support for Terratec Grabster AV350
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:08 -03:00
Mauro Carvalho Chehab 4557af9c53 V4L/DVB (11825): em28xx: add Terratec Grabby
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:08 -03:00
Devin Heitmueller d18e2fda71 V4L/DVB (11810): em28xx: properly set packet size based on the device's eeprom configuration.
The em28xx actually has a register that tells the driver what the maximum
packet size is (based on a value programmed into the eeprom).  Make use of
that register instead of assuming a hardcoded value of 564 (since 564 is not
correct for devices that do QAM such as the KWorld 340u).

Note that for now the em2874 code isn't there, falling back to the 564 value,
however this is not a problem since there are not any em2874 based devices in
the current v4l-dvb tree).

Thanks to Jarod Wilson for detecting the initial problem and figuring out that
the isoc configuration was wrong for his device.

Cc: Jarod Wilson <jarod@wilsonet.com>
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:08 -03:00
Devin Heitmueller 027aa2c771 V4L/DVB (11808): au0828: get rid of debug printk that was causing compile failures
Remove a debug printk() line I added which is no longer needed, and happened
to be causing compile failures on some earlier kernels in Han's daily
compile report.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:08 -03:00
Devin Heitmueller b8d91986e6 V4L/DVB (11807): cx88: remove xc5000 reset for Pinnacle 800i
According to the engineer at PCTV Systems, the xc5000 reset pin is supposed
to be on GPIO12.  However, despite three nights of effort, pulling that GPIO
low didn't reset the xc5000.  While pulling MO_SRST_IO low does reset the
xc5000, this also resets in the s5h1409 being reset as well.  This causes
tuning to always fail since the internal state of the s5h1409 does not match
the driver's state.

Given that the only two conditions in which the driver performs a reset is
during firmware load and powering down the chip, I am taking out the reset.
We know that the chip is being reset when the cx88 comes online, and not being
able to do power management for this board is better than not having any
tuning at all.

Problem discovered when implementing proper power management for the xc5000,
which results in calls to the reset callback *after* s5h1409 is initialized.

Cc: Steven Toth <stoth@kernellabs.com>
Cc: Chaogui Zhang <czhang1974@gmail.com>
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:08 -03:00
Devin Heitmueller e80858e88b V4L/DVB (11806): xc5000: add copyright line
Add copyright line for xc5000.c.

Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:08 -03:00
Devin Heitmueller e4b8bc5241 V4L/DVB (11805): au0828: send command to power down tuner when done with analog
Make sure the au0828 issues the command to power down the tuner when the
user is done using analog support.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:07 -03:00
Devin Heitmueller a37791c540 V4L/DVB (11804): xc5000: poll at 5ms interval for register write command completion
Instead of polling at 100ms intervals for register writes, poll at 5ms
intervals.  This is consistent with the xc5000 specification, and improves
tuning time by up to 500 ms on devices that such as the au0828 which do not
properly implement i2c clock stretching (since the five register writes that
occur for a tuning request often do not complete immediately but do complete
far before 100ms has gone by).

The net amount of time we wait before timing out is unchanged (500ms).

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:07 -03:00
David T.L. Wong 6c99080d8e V4L/DVB (11803): xc5000: add support for DVB-T tuning
This patch adds XC5000 supports for DVB-T 6MHz and 8MHz bandwidth.

Signed-off-by: David T.L. Wong <davidtlwong@gmail.com>
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:07 -03:00
Devin Heitmueller a6301d1d57 V4L/DVB (11802): xc5000: switch to new xc5000 firmware 1.6.114 with redistribution rights
Xceive has graciously allowed us to now freely redistribute the xc5000
firmware, which eliminates the need for users to manually extract the blob
from the Hauppauge driver.

Thanks to Brian Mathews <bmathews@xceive.com> for providing this code

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:07 -03:00
Devin Heitmueller f0f4633a04 V4L/DVB (11801): dib0700: reduce xc5000 sleep time for Pinnacle 801e to 10ms
According to the xc5000 spec, the reset pin only needs to be held low for 10ms.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:07 -03:00
Devin Heitmueller 4900877b7c V4L/DVB (11800): tuner-xc2028: show the proper module description for no_poweroff option
There was a typo in the module description for the "no_poweroff" option, where the
help was being associated with the "debug" option instead.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:07 -03:00
Devin Heitmueller ee7e63f599 V4L/DVB (11799): xc5000: don't load firmware until a tuning request is made
Defer loading of the xc5000 firmware until it is actually needed.  This helps
on distros that have hald, which results in the device not being available
for use for around ten seconds in cases where the i2c bus is slow (such as
the HVR-950Q).  Also, the firmware load isn't really useful since we
immediately put the device to sleep afterward, which means a firmware reload
will be required anyway.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:06 -03:00
Devin Heitmueller b6bd5eb871 V4L/DVB (11798): xc5000: add "no_poweroff" module option
Provide for the ability for a user to disable putting the tuner to sleep, in
case he doesn't want to incur the cost of reloading the firmware when starting
up his/her application.  The module options are intentionally identical to
xc3028.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:06 -03:00
Devin Heitmueller 34a0db9202 V4L/DVB (11797): xc5000: cleanup firmware loading messages
Make it a little more obvious in the dmesg output what is going on during
firmware upload.  This is more important for boards like the HVR-950q that
take nearly seven seconds to do the upload.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:06 -03:00
Devin Heitmueller 81c4dfe776 V4L/DVB (11796): xc5000: start using the newer "finerfreq" tuning command
Starting in firmware version 1.1.44, Xceive recommends using the FINERFREQ for
all normal tuning (the doc indicates reg 0x03 should only be used for fast
scanning for channel lock)

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:06 -03:00
Devin Heitmueller bae7b7d73d V4L/DVB (11795): xc5000: add build version to debug info
Expose the firmware build number along with the other version info

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:06 -03:00
Devin Heitmueller b25ed9c535 V4L/DVB (11794): au0828: reduce reset time for xc5000 to 10ms
The xc5000 datasheet indicates that the reset pin only needs to be held low
for 10ms.  Reduce the value accordingly, which speeds up the firmware load
time a bit.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:06 -03:00
Devin Heitmueller 7f05b530be V4L/DVB (11793): xc5000: Properly support power down for newer firmware
Xceive got rid of the XREG_POWER_DOWN register in later firmware revisions.
Their technical support informed me that the correct way to put the tuner
to sleep is to pull the reset pin (but don't reload the firmware).

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:05 -03:00
Devin Heitmueller 361d4892cd V4L/DVB (11792): xc5000: switch to new version of Xceive firmware
This switches to a new version of the xc5000 firmware, extracted from the
latest Hauppauge driver.  It includes the support for the XREG_BUSY register
(a lack of which was causing tuning to take 3200ms instead of around 300ms).

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:05 -03:00
Devin Heitmueller a78baacffe V4L/DVB (11791): xc5000: do not sleep after digital tuning
Don't sleep for 400ms polling the tuner's lock if in digital mode (since the
xc5000 lock status registers appear to only be reliable in analog mode)

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:05 -03:00
Devin Heitmueller 8e4c67972e V4L/DVB (11790): xc5000: restore sleep routine
Bring back the code that puts the xc5000 to sleep.  For the Pinnacle 801e
this results in power consumption at idle dropping from 325ma to 124ma.

If there are *actually* any devices that don't work in this configuration,
they should set dvb_frontend.ops.tuner_ops.sleep to NULL (per mkrufky's
suggestion)

Also, had to make sure we were making sure the firmware was loaded in the
digital version of set_params, or else we end up get i2c errors if the
device is asleep

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:05 -03:00
Devin Heitmueller 7988fc216d V4L/DVB (11789): xc5000: check xc5000_readreg return value for XC_RESULT_SUCCESS
Make return value checking for calls to i2c routines explicit.

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:05 -03:00
Devin Heitmueller d7800d4ea9 V4L/DVB (11788): xc5000: cleanup i2c write routines
Cleanup the i2c write routine, getting rid of a passthrough function with only
one caller

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:05 -03:00
Devin Heitmueller bdd335636a V4L/DVB (11787): xc5000: cleanup i2c read routines
This patch centralizes the i2c read functions, and eliminates pass-through
function only called by one caller.

Make reading of xc5000 registers an atomic i2c transaction in case we're on a
multi-master bus.

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:04 -03:00
Devin Heitmueller 91bd625e21 V4L/DVB (11786): xc5000: handle tuner reset failures properly
Properly handle tuner reset failures (before it was always returning success)

Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:04 -03:00
Dmitri Belimov 8475cbcb0f V4L/DVB (11775): tuner: add support Philips MK5 tuner
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:04 -03:00
Michael Krufky 247bc54053 V4L/DVB (11773): cx23885: clean up struct names for Hauppauge WinTV-HVR127X devices
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:04 -03:00
Michael Krufky 5308cf09fe V4L/DVB (11772): cx23885: update model matrix for "k2c2" retail boards
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:04 -03:00
Michael Krufky 6b926eca98 V4L/DVB (11771): cx23885: add DVB-T tuning support for Hauppauge WinTV-HVR1210
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:04 -03:00
Michael Krufky 19bc57968c V4L/DVB (11770): cx23885: add ATSC/QAM tuning support for Hauppauge WinTV-HVR1255
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:03 -03:00
Michael Krufky d099becb0b V4L/DVB (11769): cx23885: add ATSC/QAM tuning support for Hauppauge WinTV-HVR1275
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:03 -03:00
Michael Krufky a5dbf45766 V4L/DVB (11768): cx23885: add ATSC/QAM tuning support for Hauppauge WinTV-HVR1270
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:03 -03:00
Steven Toth 2074dffaed V4L/DVB (11767): cx23885: Add preliminary support for the HVR1270
The patch means the board will be recognised, and the parts brought
out of reset correctly. This patches depends on the centralized GPIO
patch to be merged. What's missing before the HVR-1270 will function
for DTV? The model# needs to be added to avoid 'unknown model'
output and the LG3305/Tuner need to be attached in cx23885-dvb.c

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:03 -03:00
Michael Krufky 6de72bd645 V4L/DVB (11766): cx23885: mark functions encoder_on_port[bc] as static inline
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:03 -03:00
Steven Toth 6f8bee9b10 V4L/DVB (11765): cx23885: Add generic functions for driving GPIO's
The GPIO's on the product can be in one of three places. To date we've
mainly used the GPIO's on the bridge itself, and once on the encoder.
Rather than having the complexity of multiple GPIO writes/reads from
isolated placed in the driver we'll route them through this function,
so we can make intelligent decisions about 1) Where the GPIO lives
and 2) Whether it conflicts (based on board) with some other function
to avoid bugs.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:02 -03:00
Oliver Endriss ea3b73dc13 V4L/DVB (11763): dvb-ttpci: Some whitespace adjustments
Some whitespace adjustments.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:02 -03:00
Oliver Endriss e76ef13352 V4L/DVB (11762): dvb-ttpci: Fixed return code of av7110_av_start_play
av7110_av_start_play() should return 0 on success.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:02 -03:00
Oliver Endriss 452dac4550 V4L/DVB (11761): dvb-ttpci: Fixed VIDEO_SLOWMOTION ioctl
Fixed VIDEO_SLOWMOTION ioctl.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:02 -03:00
Oliver Endriss ef226d00dd V4L/DVB (11760): dvb-ttpci: Check transport error indicator flag
Discard PES packet if transport error indicator flag is set.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:02 -03:00
Oliver Endriss fd46d16d60 V4L/DVB (11759): dvb-ttpci: Add TS replay capability
Implemented TS replay capability.
audio/video devices are able to process PES and TS data now.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:02 -03:00
Randy Dunlap b7fd606714 V4L/DVB (11758): 2: handle unregister for non-I2C builds
Build fails when CONFIG_I2C=n, so handle that case in the if block:

drivers/built-in.o: In function `v4l2_device_unregister':
(.text+0x157821): undefined reference to `i2c_unregister_device'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:01 -03:00
Steven Toth 507a34f450 V4L/DVB (11701): pvrusb2: Ensure the PVRUSB2 disabled the i2c gate on the tda10048.
... else DVB-T tuning will not work.

Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:01 -03:00
Steven Toth 8153c3b7d8 V4L/DVB (11700): tda10048: Added option to block i2c gate control from other drivers.
Currently, DVB-T is broken and this fixes it.

The PVRUSB2 has an odd I2C bus configuration where opening the i2c gate
on the digital and analog demod causes the tuner to fail. This needs
to be protected against for the PVRUSB2.

Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:01 -03:00
Hans Verkuil 38092a4402 V4L/DVB (11677): radio-fm16: fix g_tuner.
g_tuner handled capability, audmode and rxsubchans incorrectly.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:01 -03:00
Hans Verkuil 1d80db562f V4L/DVB (11676): radio-fm16: cleanups
Remove bogus flags field

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:01 -03:00
Randy Dunlap 9d6f7f603f V4L/DVB (11756): soc_camera: depends on I2C
soc_camera uses i2c_*() functions and has build errors when CONFIG_I2C=n:

ERROR: "i2c_new_device" [drivers/media/video/soc_camera.ko] undefined!
ERROR: "i2c_get_adapter" [drivers/media/video/soc_camera.ko] undefined!
ERROR: "i2c_put_adapter" [drivers/media/video/soc_camera.ko] undefined!
ERROR: "i2c_unregister_device" [drivers/media/video/soc_camera.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:01 -03:00
Andy Walls 5d24a037f1 V4L/DVB (11753): tveeprom: Point the TCL MNM05-4 tuner entry to an actual tuner definition
The TCL MNM05-04 is used on some HVR-1600 models.  It appears to be
similar to the TCL MFMN05-4 but without FM radio.  The
TUNER_PHILIPS_FM1236_MK3 tuner definition appears to be the proper existing
tuner definition to use for this tuner.

Reported-by: Matt Beadon <matt.beadon@gmail.com>
Tested-by: Matt Beadon <matt.beadon@gmail.com>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:00 -03:00
Andy Walls 4442ee8bdd V4L/DVB (11752): cx18: Add missing newline to tuner detection error message
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:00 -03:00
Mike Isely 008b6c5f76 V4L/DVB (11750): pvrusb2: Allocate a routing ID for future support of Terratec Grabster AV400
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:00 -03:00
Jean Delvare fa7ce76428 V4L/DVB (11748): pvrusb2: Don't use the internal i2c client list
The i2c core used to maintain a list of client for each adapter. This
is a duplication of what the driver core already does, so this list
will be removed as part of a future cleanup. Anyone using this list
must stop doing so.

For pvrusb2, I propose the following change, which should lead to an
equally informative output. The only difference is that i2c clients
which are not a v4l2 subdev won't show up, but I guess this case is
not supposed to happen anyway.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:00 -03:00
Mike Isely 48c5b0dfd7 V4L/DVB (11747): pvrusb2: Bump up version advertised through v4l interface
Kick up the pvrusb2 version number advertised through the v4l
interface.  This value really has almost no meaning because I don't
make a serious attempt to version the driver in this manner (otherwise
this one line becomes a nasty hotspot of changes and merge
conflicts).  The value that is here is really a historical thing.
However Hans Verkuil thought it might be a good idea to bump up the
number anyway right now since the driver's mechanism for communicating
with the v4l core has pretty much completely changed.  Sending out a

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:00 -03:00
Mike Isely 96e56c1ac4 V4L/DVB (11746): pvrusb2: Set ir_video autoloading to default disabled
This sets the disable_autoload_ir_video module option to being set,
which disables any attempt by the driver to autoload IR support.  This
changes preserves previous behavior, for now.  This change can be set
back concurrent with other changes that finally update i2c-kbd-i2c to
use the new i2c binding model.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:21:00 -03:00
Mike Isely cd85b7afe1 V4L/DVB (11745): pvrusb2: Update to work with upcoming ir_video changes in v4l-dvb core
The ir-kbd-i2c module is about to be updated to match the new style
i2c binding model.  These pvrusb2 changes maintain compatibility with
that change.  Note that this does not actually break anything even
without the expected ir-kbd-i2c changes yet because previously the
pvrusb2 didn't autoload ir-kbd-i2c anyway.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:59 -03:00
Mike Isely 27eab3840b V4L/DVB (11744): pvrusb2: Select, track, and report IR scheme in use with the device
This change defines all possible "IR schemes" related to the pvrusb2
driver, on a per-device basis.  That information is then set according
to the hardware in use.  The idea here is to make possible a more
intelligent future decision on which, if any, IR receiver driver might
be loaded during initialization.

Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:59 -03:00
Chaithrika U S 06e61f8d5f V4L/DVB (11743): Analog Devices ADV7343 video encoder driver
Add ADV7343 I2C based video encoder driver. This follows the
v4l2-subdev framework. This driver has been tested on TI DM646x EVM. It
has been tested for Composite and Component outputs.

Updates as per review by Mauro Chehab, added support for more standards
supported by the encoder. Also adding the missed out signed-offs.Tested
only NTSC and PAL standards.

[hverkuil@xs4all.nl: s_routing API changed, updated driver to use new API]
Signed-off-by: Manjunath Hadli <mrh@ti.com>
Signed-off-by: Brijesh Jadav <brijesh.j@ti.com>
Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:59 -03:00
Chaithrika U S 40199c50b8 V4L/DVB (11742): TI THS7303 video amplifier driver code
This patch adds driver for TI THS7303 video amplifier. This driver is
implemented as a v4l2 sub device. Tested on TI DM646x EVM.

This version has updates based on review comments by Mauro Chehab.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:59 -03:00
Roel Kluin b475f4eeda V4L/DVB (11741): zoran: Fix &&/|| typo
Fix &&/|| typo. `default_norm' can be 0 (PAL), 1 (NTSC) or 2 (SECAM),
the condition tested was impossible.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:59 -03:00
Roel Kluin 223ffe5f82 V4L/DVB: cleanup redundant tests on unsigned
Remove redundant tests on unsigned.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:58 -03:00
Greg Kroah-Hartman ca19d84295 V4L/DVB (11739): remove driver_data direct access of struct device
In the near future, the driver core is going to not allow direct access
to the driver_data pointer in struct device.  Instead, the functions
dev_get_drvdata() and dev_set_drvdata() should be used.  These functions
have been around since the beginning, so are backwards compatible with
all older kernel versions.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:58 -03:00
Jean Delvare 413ef8a20a V4L/DVB (11737): Drop stray references to i2c_probe
The new i2c binding model doesn't use i2c_probe.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:58 -03:00
Németh Márton 925d74ae71 V4L/DVB (11736): videobuf: modify return value of VIDIOC_REQBUFS ioctl
The V4L2 ioctls usually return 0 when the operation was successful
and -1 in case of error. Currently VIDIOC_REQBUFS returns the
number of buffers which is redundant because this information is
available in count field of struct v4l2_requestbuffers. The
V4L2 API specification, revision 0.24 [1] explicitly specifies for
VIDIOC_REQBUFS that the return value shall be 0 on success.

The patch was tested with v4l-test 0.13 [2] with vivi driver.

References:
[1] V4L2 API specification, revision 0.24
    http://v4l2spec.bytesex.org/spec/r13696.htm

[2] v4l-test: Test environment for Video For Linux Two API
    http://v4l-test.sourceforge.net/

Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:58 -03:00
Pieter Van Schaik 3e9a489743 V4L/DVB (11735): Enables the Winfast TV2000 XP Global TV IR
Adds support to the remote control of the Winfast TV2000 XP Global TV
capture card. A case statement was added in order to initialize the
GPIO data structures as well as a case statement for handling the keys
correctly when pressed.

Thanks to Hermann and Mauro for all the help

Signed-off-by: Pieter C van Schaik <vansterpc@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:58 -03:00
Dmitri Belimov 2ec3475609 V4L/DVB (11734): remove hw reset of MPEG encoder when lost/found seq.
When we capture signal from composite input offen lost and found syncro
sequence. In this case the MPEG coder hardware reset after each
lost/found event. The image has a lot of artefactes. This patch remove
hardware reset of MPEG encoder.

This is patch from our customer. I checked this.

With my best regards, Dmitry.

Signed-off-by: Alexey Osipov <lion-simba@pridelands.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:57 -03:00
Dmitri Belimov 82aa98fd92 V4L/DVB (11733): increase MPEG encoder timout
If video has a lot of changes in frame, MPEG encoder need more time for
coding process. Add new bigger timeout for encoder.

This is patch from our customer. I checked this.

Signed-off-by: Alexey Osipov <lion-simba@pridelands.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:57 -03:00
hermann pitton be4a1a2209 V4L/DVB (11732): saa7134: disable not yet existing IR and DVB support on the Compro T750
The Compro VideoMate T750 has no support for IR and DVB-T yet.
Disable both to avoid fall through and confusing printouts.

Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:57 -03:00
Magnus Damm c9adb4314f V4L/DVB (11731): buf-dma-contig: remove sync operation
Remove the videobuf-dma-contig sync operation. Sync is only needed
for noncoherent buffers, and since videobuf-dma-contig is built on
coherent memory allocators the memory is by definition always in sync.

Reported-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Reviewed-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:57 -03:00
Wen-chien Jesse Sung 6e9c1a2a67 V4L/DVB (11730): af9015: support for KWorld MC810
Add USB ID (1b80:c810) for Kworld MC810.

Signed-off-by: Wen-chien Jesse Sung <jesse@cola.voip.idv.tw>
Acked-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:57 -03:00
Roel Kluin 7b5cb55838 V4L/DVB: cx23885/cymax2: binary/logical &/&& typo
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:56 -03:00
Tobias Klauser 60c7ef3967 V4L/DVB (11724): firedtv: Storage class should be before const qualifier
The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:56 -03:00
Jean Delvare e9785250ef V4L/DVB (11723): Link firmware to physical device
Use the physical device rather than the i2c adapter as the reference
device when loading firmwares. This will prevent the sysfs name
collision with i2c-dev that has been reported many times.

I may have missed other drivers which need the same fix.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:56 -03:00
Jani Monoses f8eaaf4f2a V4L/DVB (11720): gspca - sonixj: Webcam 06f8:3008 added
Signed-off-by: Jani Monoses <jani@ubuntu.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:56 -03:00
Jean-Francois Moine d1ba6f15c8 V4L/DVB (11719): gspca - vc032x: mi1320_soc images are upside-down
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:56 -03:00
Jean-Francois Moine 2c9561088b V4L/DVB (11718): gspca - vc032x: Bad pixelformat for mi1320_soc
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:56 -03:00
Jean-Francois Moine ceec80e5a5 V4L/DVB (11717): gspca - sonixj: Webcams with bridge sn9c128 added
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:55 -03:00
Jean-Francois Moine c8b9b2cad4 V4L/DVB (11716): gspca - sonixj: Adjust some exchanges according to traces
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:55 -03:00
Jean-Francois Moine 49cb6b046d V4L/DVB (11715): gspca - main: Set the number of packets per ISOC message.
The number of packets per isochronous message may now be set by the subdrivers
(default value 32).

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:55 -03:00
Jean-Francois Moine 59746e1390 V4L/DVB (11714): gspca - spca500 and sunplus: Change the 0x00 insertion mechanism.
The new mechanism does not use any temporary buffer.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:55 -03:00
Jean-Francois Moine ed47119fb7 V4L/DVB (11713): gspca - ov534: Don't discard the images when no UVC EOF
A new image may start without any UVC EOF in the last packet of the
previous image.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:55 -03:00
Jean-Francois Moine 8dd07ef123 V4L/DVB (11712): gspca - main: Set the current alternate setting only when needed
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:55 -03:00
Jean-Francois Moine 30d35e4950 V4L/DVB (11711): gspca - main: Fix a crash when no bandwidth available
When the bandwidth is not wide enough, the transfer endpoint may be set to
the one of the alternate setting 0. This one may be null and this causes a
divide by 0 oops.

Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:54 -03:00
Jean-Francois Moine 6929dc6b30 V4L/DVB (11710): gspca - main: Webcams cannot do both isoc and bulk image transfers.
Let the subdrivers to set the 'image transfer by bulk' flag.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:54 -03:00
Jean-Francois Moine 0b119b7bf4 V4L/DVB (11709): gspca - zc3xx: Bad debug level in i2c_read
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:54 -03:00
Jean-Francois Moine 11bd199aa0 V4L/DVB (11708): gspca - main: Version change.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:54 -03:00
Guennadi Liakhovetski 0fd327bd0d V4L/DVB (11705): soc-camera: prepare for the platform driver conversion
Add a platform driver to soc_camera.c. This way we preserve backwards
compatibility with existing platforms and can start converting them one by one
to the new platform-device soc-camera interface.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:54 -03:00
Andy Walls f4672dffa1 V4L/DVB (11703): cx18: Have audio decoder drive SIF gain control, and rework AFE config
Ensure the variable gain amplifier gain for SIF is driven by the audio deocder
and not the video decoder.  This forced rework of the analog front end (AFE)
configuration to not rely on autoconfiguration, but instead set up the AFE mux,
AFE parameters, and ADC1 & ADC2 configurations explicitly.

Reported-by: Helen Buus <mythtv@hbuus.com>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:54 -03:00
Steven Toth c7470206de V4L/DVB (11699): pvrusb2: Ensure we specify the I/F at attach time
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:53 -03:00
Steven Toth 484d9e0577 V4L/DVB (11698): cx23885: For tda10048 boards ensure we specify the I/F
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:53 -03:00
Steven Toth d114153816 V4L/DVB (11697): tda10048: Add ability to select I/F at attach time.
tda10048: Add ability to select I/F at attach time.

Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:53 -03:00
Erik Andrén 17720e07b6 V4L/DVB (11695): gspca - stv06xx-vv6410: Set analog gain at init
Set the analog gain at sensor init. Also set a sensible default value.

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:53 -03:00
Erik Andrén 28d7a20a78 V4L/DVB (11694): gspca - stv06xx-vv6410: No need to double set gain and exposure
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:53 -03:00
Erik Andrén 1906d8d17e V4L/DVB (11693): gspca - stv06xx-vv6410: Add exposure ctrl
Add the possibility to control the exposure on the vv6410 sensor

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:53 -03:00
Erik Andrén 1b844b5367 V4L/DVB (11692): gspca - m5602: Checkpatch.pl fixes
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:52 -03:00
Erik Andrén 951872a819 V4L/DVB (11691): gspca - m5602-ov9650: Add ASUS A6K vflip quirk
The ASUS A6K needs the vflip quirk. Thanks to Marco Baldo for reporting
the issue.

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:52 -03:00
Erik Andrén 79c3576a19 V4L/DVB (11690): gspca - m5602-s5k4aa: Add vflip quirk for the MSI L735
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:52 -03:00
Grégory Lardière 9bc738fb53 V4L/DVB (11689): gspca - m5602-s5k4aa: Fixup the vflip/hflip
Ensure that the hflip and vflip is consistent when the sensor needs to
be vflip quirked or not.

Signed-off-by: Grégory Lardière <spmf2004-m560x@yahoo.fr>
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:52 -03:00
Grégory Lardière 60d52ceced V4L/DVB (11688): gspca - m5602-s5k4aa: Fixup SXGA resolution.
The SXGA resolution doesn't work unless you first force the VGA resolution.
More investigation is needed in order to fix this the "right" way.

Signed-off-by: Grégory Lardière <spmf2004-m560x@yahoo.fr>
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:52 -03:00
Erik Andrén 4db120bc07 V4L/DVB (11687): gspca - m5602-ov9650: Add missing v4l2 ctrl ids
Red and blue balance missed their id fields

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:51 -03:00
Erik Andrén 65bd761e9a V4L/DVB (11686): gspca - m5602-s5k4aa: Disable SXGA resolution for now
SXGA resolution needs more testing. Disable it for now

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:51 -03:00
Erik Andrén ff1e6a2155 V4L/DVB (11685): gspca - gspca-m5602: Constify parameters of two functions
A number of parameters to some functions in the m5602 are constant and should be flagged as such.

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:51 -03:00
Erik Andrén 4fcec145e9 V4L/DVB (11684): gspca - m5602-s5k4aa: Add experimental SXGA support
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:51 -03:00
Manu Abraham 27d4032143 V4L/DVB (11682): STV0900/STV0903: Add support for Silicon cut >= 3
1. Support Silicon Cut >= 3.0
2. Remove support for obsolete cuts: 1.0. 1.1. 1.2
3. Try to catch more error cases

Driver doesn't now attach to obsolete silcon cuts, It just simply quits.
Results in code simplification, with removal of the obsolete cuts.

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:51 -03:00
Hans Verkuil b5b2b7ed56 V4L/DVB (11673): v4l2-device: unregister i2c_clients when unregistering the v4l2_device.
Until now I relied on i2c_del_adapter to unregister the i2c_clients for
me, however, if the i2c bus is a platform bus then it is never deleted.

So instead I need to unregister i2c clients when unregistering the
v4l2_device.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:51 -03:00
Hans Verkuil a79b11c025 V4L/DVB (11672): ivtv: use v4l2_device_set_name.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:50 -03:00
Hans Verkuil 102e781364 V4L/DVB (11671): v4l2: add v4l2_device_set_name()
Add a utility function that can be used to setup the v4l2_device's name
field in a standard manner.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:50 -03:00
Hans Verkuil 416a7aa883 V4L/DVB (11670): tuner: remove tuner_i2c_address_check
Support for tuners with i2c addresses >= 0x65 is dropped since no tuners
with addresses in the range 0x65-0x6f have been found.

This patch removes addresses 0x65-0x6f from the list of tuner probe addresses,
it removes the kernel warning that warned if addresses in this range appeared,
and it removed a hack for the cx88 that is no longer needed now that the
tuner address range is reduced.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:50 -03:00
Steven Toth a26ccc9d76 V4L/DVB (11666): cx23885: Don't assume GPIO interrupts are cam related.
cx23885: Don't assume GPIO interrupts are cam related.

Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:50 -03:00
Steven Toth 501d8cd4e2 V4L/DVB (11665): cx88: Add support for the Hauppauge IROnly board.
cx88: Add support for the Hauppauge IROnly board.

Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:50 -03:00
Mauro Carvalho Chehab f1ff355a2c V4L/DVB (11663): Fix a warning introduced by git commit ec5f5bf805
/home/v4l/master/v4l/radio-si470x.c: In function 'si470x_fops_release':
/home/v4l/master/v4l/radio-si470x.c:1218: warning: label 'unlock' defined but not used

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:50 -03:00
Mauro Carvalho Chehab efe018b315 V4L/DVB (11654a): Add a missing end of line at the end of gspca/m5602/Makefile
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:49 -03:00
Tobias Klauser 2e03669d9d V4L/DVB (11654): gspca - m5602: Storage class should be before const qualifier
The C99 specification states in section 6.11.5:

The placement of a storage-class specifier other than at the
beginning of the declaration specifiers in a declaration is an
obsolescent feature.

[mchehab@redhat.com: Fix a trivial merge conflict]
Cc: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:49 -03:00
Erik Andrén 72b79747a8 V4L/DVB (11650): gspca - m5602: Sort out macro conflict by adding a prefix
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:49 -03:00
Erik Andrén 7b8265033d V4L/DVB (11649): gspca - m5602: Probe the ov7660 sensor
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:49 -03:00
Erik Andrén 52fa70b7f4 V4L/DVB (11648): gspca - m5602: Remove some needless error checking and add comments
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:49 -03:00
Erik Andrén 934f78c306 V4L/DVB (11647): gspca - m5602-po1030: Disable QVGA for now
Getting QVGA to be supported on the po1030 seems harder than I first thought. I need access to the proper hardware in order to fix it up.

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:49 -03:00
Erik Andrén 489a8c3784 V4L/DVB (11646): gspca - m5602-mt9m111: Disable QVGA until it has been verified to work
The QVGA resolution currently hasn't been verified to work. Disable it for now.

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:48 -03:00
Johannes Klug 201a8a6c3f V4L/DVB (11645): gspca - m5602-ov9650: Add image flip quirk for the ASUS A6VA
Signed-off-by: Johannes Klug <jklug@joyware.de>
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:48 -03:00
Erik Andrén d33762d201 V4L/DVB (11644): gspca - m5602-s5k4aa: Remove some unneeded init code.
Remove some redundant init from the s5k4aa. All these registers are programmed again later in the init phase

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:48 -03:00
Erik Andrén 56513ed50c V4L/DVB (11643): gspca - m5602: Add the ov7660 to the module parameter description.
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:48 -03:00
Erik Andrén c9304e43fb V4L/DVB (11642): gspca - m5602-ov7660: Add a gain ctrl
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:48 -03:00
Erik Andrén 2b622e2d00 V4L/DVB (11641): gspca - m5602-ov7660: Remove useless init data
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:47 -03:00
Erik Andrén 2f17e1a1f0 V4L/DVB (11640): gspca - m5602-s5k4aa: Flip hflip and vflip together
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:47 -03:00
Erik Andrén c731e271af V4L/DVB (11639): gspca - m5602-mt9m111: Correct the hflip/vflip semantics
mt9m111: Hflip and vflip shall always be 0 at start and the image shall be correctly aligned.
The mt9m111 is hflipped and vflipped by default. Correct the semantics to make this happen.

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:47 -03:00
Erik Andrén 81b4293ae6 V4L/DVB (11638): gspca - m5602-ov7660: Make an educated guess on the proper hsync/vsync
Based on how the ov9650 is configured, make an educated guess on the hsync/vsync setup for the ov7660

Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:47 -03:00
Erik Andrén 0364c4ca34 V4L/DVB (11637): gspca - m5602-ov7660: Design init function.
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:47 -03:00
Erik Andrén ea8f74b168 V4L/DVB (11636): gspca - m5602-ov7660: Design probe function
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:47 -03:00
Erik Andrén 4763fa84d9 V4L/DVB (11635): gspca - m5602-ov7660: Initial checkin of sensor skeleton code
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:46 -03:00
Lukas Karas c41507ba06 V4L/DVB (11634): gspca - m5602-s5k83a: Set the sensor_settings pointer correctly
Signed-off-by: Lukas Karas <lukas.karas@centrum.cz>
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:46 -03:00
Erik Andrén cde41bb292 V4L/DVB (11633): gspca - m5602-s5k83a: Move hsync/vsync setup to start function
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:46 -03:00
Erik Andrén 57851d0cd0 V4L/DVB (11632): gspca - m5602-s5k83a: Reset the v4l2 ctrl cache upon sensor init
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:46 -03:00
Erik Andrén 4c3414eeb3 V4L/DVB (11631): gspca - m5602: Remove useless error check
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:46 -03:00
Erik Andrén 04e84f8719 V4L/DVB (11630): gspca - s5k83a: Add resolution annotations
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:46 -03:00
Erik Andrén 326405de18 V4L/DVB (11629): gspca - m5602-s5k83a: Move some init code around
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:45 -03:00
Erik Andrén 24c64f4278 V4L/DVB (11628): gspca - m5602-s5k83a: Remove more init
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:45 -03:00
Andy Walls 33b55a0a7d V4L/DVB (11624): cx18: Toggle the AI1 mux when changing the CX18_AUDIO_ENABLE register
Toggle the AI1 mux when changing the CX18_AUDIO_ENABLE register.  It's hard to
reliably tell when we have written to this register successfully unless we
change some bits we know we can read back.  The AI mux bits always read back
what we wrote to them, so force them to toggle whenever we have to write to
the register, so we can tell we wrote to the register successfully.

This change was prompted by users experiencing broadcast audio decoding
problems after the cx18 module loads for the first time.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:45 -03:00
Andy Walls 1bd8e15ac3 V4L/DVB (11623): cx18: Verify cx18-av-core digitizer firmware loads correctly
Add code to verify the cx18-av-core digitizer firmware loads correctly.  The
verification function reads back and compares the firmware bytes loaded
into the A/V core.  The result of the verification is only used to log a
message in the system log.

This change was prompted by users with multiple card setups that have problems
with broadcast audio decoding the first time the cx18 module is loaded.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:45 -03:00
Andy Walls 0c62925229 V4L/DVB (11622): cx18: Allow IVTV format VBI insertion in MPEG-2 SVCD and DVD streams
Both the MPEG-2 SVCD stream format and the MPEG-2 DVD stream format should
use an MPEG-2 PS container.  This makes it safe to stuff IVTV Private Stream 1
VBI packets in these stream types using the existing cx18 driver routines.

Reported-by: Helen Buus <mythtv@hbuus.com>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:45 -03:00
Andy Walls 9982be8a14 V4L/DVB (11620): cx18: Increment version due to significant buffer handling changes
Version bump from 1.1.0 to 1.2.0

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:45 -03:00
Andy Walls 21a278b85d V4L/DVB (11619): cx18: Simplify the work handler for outgoing mailbox commands
Simplify the way outgoing work handler gets scheduled to send empty buffers
back to the firmware for use.  Also reduced the memory required for scheduling
this outgoing work, by using a single, per stream work object.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:44 -03:00
Andy Walls 40c5520f55 V4L/DVB (11618): cx18: Convert per stream mutex locks to per queue spin locks
To avoid sleeps in providing buffers to user space and in handling incoming
buffers from the capture unit, converted the per stream mutex for locking
queues to 3 spin locks.  There is now a spin lock per queue
to increase concurrency when moving buffers around.

Also simplified queue manipulations and buffer handling of incoming buffers
of data from the capture unit.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:44 -03:00
Andy Walls 5f0a3cfcfd V4L/DVB (11617): cx18: Set up to wait for a one-shot response before sending a firmware cmd
When sending an outgoing firmware command, prepare to wait before we raise the
interrupt, so we don't miss the wake_up() on the acknowledgment.  When waiting
for the acknowledgement, there is no need to loop around schedule(), as there
will only be one interrupt, and hence one wake_up(), issued.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:44 -03:00
Andy Walls 8711615951 V4L/DVB (11616): cx18: Add a work queue for deferring empty buffer handoffs to the firmware
This change defers sending all CX18_CPU_DE_SET_MDL commands, for a stream with
an ongoing capture, by adding a work queue to handle sending such commands when
needed.  This prevents any sleeps, caused by notifying the firmware of new
usable buffers, when a V4L2 application read() is being satisfied or when
an incoming buffer is processed by the cx18-NN-in work queue thread.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:44 -03:00
Andy Walls deed75ed9f V4L/DVB (11615): cx18: Rename the work queue to "in_work_queue"
Rename the work queue to "in_work_queue" to indicate it is handling
incoming mailbox commands.  This is preparation for adding a work queue
for handling deferrable outgoing mailbox commands.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:44 -03:00
Guennadi Liakhovetski c09b77806e V4L/DVB (11611): soc-camera: link host drivers after clients
With the transition of soc-camera to become a platform driver and to the
v4l2-subdev framework the initialisation order becomes important. In case
of a static build clients (i2c) drivers have to be available when host
drivers are probed. Moving host drivers down in the Makefile achieves the
desired order.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:43 -03:00
Guennadi Liakhovetski 9538e1c226 V4L/DVB (11610): soc-camera: simplify register access routines in multiple sensor drivers
Register access routines only need the I2C client, not the soc-camera device
context.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:43 -03:00
Guennadi Liakhovetski eff505fa15 V4L/DVB (11609): soc-camera: remove an extra device generation from struct soc_camera_host
Make camera devices direct children of host platform devices, move the
inheritance management into the soc_camera.c core driver.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:43 -03:00
Guennadi Liakhovetski eb6c8558f7 V4L/DVB (11608): soc-camera: host-driver cleanup
Embed struct soc_camera_host in platform-specific per host instance objects
instead of allocating them statically in drivers, use platform_[gs]et_drvdata
consistently, use resource_size().

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:43 -03:00
Guennadi Liakhovetski 594bb46dbc V4L/DVB (11607): soc-camera: add a free_bus method to struct soc_camera_link
Currently pcm990 camera bus-width management functions request a GPIO and never
free it again. With this approach the GPIO extender driver cannot be unloaded
once camera drivers have been loaded, also unloading theb i2c-pxa bus driver
produces errors, because the GPIO extender driver cannot unregister properly.
Another problem is, that if camera drivers are once loaded before the GPIO
extender driver, the platform code marks the GPIO unavailable and only a reboot
helps to recover. Adding an explicit free_bus method and using it in mt9m001
and mt9v022 drivers fixes these problems.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:43 -03:00
Dmitri Belimov 84d728c3df V4L/DVB (11604): saa7134: split Behold`s card entries to properly identify the model
Split Beholdr`s cards to correct models.

Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:42 -03:00
Oldřich Jedlička d46de9d236 V4L/DVB (11567): saa7134: Added support for AVerMedia Cardbus Plus
Here comes the full support for AVerMedia Cardbus Plus (E501R) - including
remote control. TV, Composite and FM radio tested, I don't have S-Video to
test. I've figured out that the radio works only with xtal frequency 13MHz.

[mchehab@redhat.com: CodingStyle fixes]
Signed-off-by: Oldřich Jedlička <oldium.pro@seznam.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:42 -03:00
Andy Shevchenko df0dbbe240 V4L/DVB (11442): saa7134: BZ#7524: Add AVerTV Studio 507UA support
[mchehab@redhat.com: Fix merge conflicts and CodingStyle issues]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:42 -03:00
Dean Anderson abce21f40f V4L/DVB (11605): patch: s2255drv: code cleanup
This patch does:
	- remove unused structure items.
	- define Response values;
	- change Driver revision printk.

Signed-off-by: Dean Anderson <dean@sensoray.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:42 -03:00
Andreas Regel 7fc08bbb99 V4L/DVB (11601): stv090x: update demodulator capabilities
Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:42 -03:00
Andreas Regel 560db4a1a0 V4L/DVB (11600): budget: Use Continuous clock
Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:42 -03:00
Andreas Regel 62ad7c1188 V4L/DVB (11599): S2-1600: Use budget driver instead of budged-ci
Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:41 -03:00
Andreas Regel cbc320d278 V4L/DVB (11598): stv090x: fix missing wakeup in init
Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:41 -03:00
Andreas Regel 9629c5b69d V4L/DVB (11597): stv090x: fixes read_status to return 0 in case of no error
Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:41 -03:00
Andreas Regel 94871465b6 V4L/DVB (11596): stv090x: fixes some register definitions
Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:40 -03:00
Andreas Regel 2f5914be7c V4L/DVB (11595): stv090x: fixes a few bugs
This patch fixes:
* Cut revision was read too late
* Missing increment
* wrong return value
* mismatched entries

Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:40 -03:00
Andreas Regel 64104dc901 V4L/DVB (11594): stv090x: Fix incorrect TSMODE usage
Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:40 -03:00
Andreas Regel 4e58a6827a V4L/DVB (11593): stv090x: Fix Rolloff
Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:40 -03:00
Andreas Regel f2b2fd4013 V4L/DVB (11592): stv6110x: Fix read bug
Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16 18:20:40 -03:00