There is no real benefit to keeping the length of an image id, so
get rid of it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: David Zafman <david.zafman@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There may have been a benefit to hanging on to the length of an
image name before, but there is really none now. The only time it's
used is when probing for rbd images, so we can just compute the
length then.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: David Zafman <david.zafman@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
I promised Josh I would document whether there were any restrictions
needed for accessing fields of an rbd_spec structure. This adds a
big block of comments that documents the structure and how it is
used--including the fact that we don't attempt to synchronize access
to it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: David Zafman <david.zafman@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The functions rbd_get_dev() and rbd_put_dev() are trivial wrappers
that add no value, and their existence suggests they may do more
than what they do.
Get rid of them.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
ENOTSUPP is not a standard errno (it shows up as "Unknown error 524"
in an error message). This is what was getting produced when the
the local rbd code does not implement features required by a
discovered rbd image.
Change the error code returned in this case to ENXIO.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
RBD_MAX_SEG_NAME_LEN represents the maximum length of an rbd object
name (i.e., one of the objects providing storage backing an rbd
image).
Another symbol, MAX_OBJ_NAME_SIZE, is used in the osd client code to
define the maximum length of any object name in an osd request.
Right now they disagree, with RBD_MAX_SEG_NAME_LEN being too big.
There's no real benefit at this point to defining the rbd object
name length limit separate from any other object name, so just
get rid of RBD_MAX_SEG_NAME_LEN and use MAX_OBJ_NAME_SIZE in its
place.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
There is no check in rbd_remove() to see if anybody holds open the
image being removed. That's not cool.
Add a simple open count that goes up and down with opens and closes
(releases) of the device, and don't allow an rbd image to be removed
if the count is non-zero.
Protect the updates of the open count value with ctl_mutex to ensure
the underlying rbd device doesn't get removed while concurrently
being opened.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
When a layered rbd image has a parent, that parent is identified
only by its pool id, image id, and snapshot id. Images that have
been mapped also record *names* for those three id's.
Add code to look up these names for parent images so they match
mapped images more closely. Skip doing this for an image if it
already has its pool name defined (this will be the case for images
mapped by the user).
It is possible that an the name of a parent image can't be
determined, even if the image id is valid. If this occurs it
does not preclude correct operation, so don't treat this as
an error.
On the other hand, defined pools will always have both an id and a
name. And any snapshot of an image identified as a parent for a
clone image will exist, and will have a name (if not it indicates
some other internal error). So treat failure to get these bits
of information as errors.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Add support for getting the the information identifying the parent
image for rbd images that have them. The child image holds a
reference to its parent image specification structure. Create a new
entry "parent" in /sys/bus/rbd/image/N/ to report the identifying
information for the parent image, if any.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Format 2 parent images are partially identified by their image id,
but it may not be possible to determine their image name. The name
is not strictly needed for correct operation, so we won't be
treating it as an error if we don't know it. Handle this case
gracefully in rbd_name_show().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
We will know the image id for format 2 parent images, but won't
initially know its image name. Avoid making the query for an image
id in rbd_dev_image_id() if it's already known.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Group the activities that now take place after an rbd_dev_probe()
call into a single function, and move the call to that function
into rbd_dev_probe() itself.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Encapsulate the creation/initialization and destruction of rbd
device structures. The rbd_client and the rbd_spec structures
provided on creation hold references whose ownership is transferred
to the new rbd_device structure.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Group the allocation and initialization of fields of the rbd device
structure created in rbd_add(). Move the grouped code down later in
the function, just prior to the call to rbd_dev_probe(). This is
for the most part simple code movement.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The only reason rbd_dev is passed to rbd_get_client() is so its
rbd_client field can get assigned. Instead, just return the
rbd_client pointer as a result and have the caller do the
assignment.
Change rbd_put_client() so it takes an rbd_client structure,
so follows the more typical symmetry with rbd_get_client().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Pass the address of an rbd_spec structure to rbd_add_parse_args().
Use it to hold the information defining the rbd image to be mapped
in an rbd_add() call.
Use the result in the caller to initialize the rbd_dev->id field.
This means rbd_dev is no longer needed in rbd_add_parse_args(),
so get rid of it.
Now that this transformation of rbd_add_parse_args() is complete,
correct and expand on the its header documentation to reflect the
new reality.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
With layered images we'll share rbd_spec structures, so add a
reference count to it. It neatens up some code also.
A silly get/put pair is added to the alloc routine just to avoid
"defined but not used" warnings. It will go away soon.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Group the fields that uniquely specify an rbd image into a new
reference-counted rbd_spec structure. This structure will be used
to describe the desired image when mapping an image, and when
probing parent images in layered rbd devices. Replace the set of
fields in the rbd device structure with a pointer to a dynamically
allocated rbd_spec.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Change the interface to rbd_add_parse_args() so it returns an
error code rather than a pointer. Return the ceph_options result
via a pointer whose address is passed as an argument.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Have the caller pass the address of an rbd_options structure to
rbd_add_parse_args(), to be initialized with the information
gleaned as a result of the parse.
I know, this is another near-reversal of a recent change...
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The snapshot name returned by rbd_add_parse_args() just gets saved
in the rbd_dev eventually. So just do that inside that function and
do away with the snap_name argument, both in rbd_add_parse_args()
and rbd_dev_set_mapping().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
They "options" argument to rbd_add_parse_args() (and it's partner
options_size) is now only needed within the function, so there's no
need to have the caller allocate and pass the options buffer. Just
allocate the options buffer within the function using dup_token().
Also distinguish between failures due to failed memory allocation
and failing because a required argument was missing.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The value returned in the "snap_name_len" argument to
rbd_add_parse_args() is never actually used, so get rid of it.
The snap_name_len recorded in rbd_dev_v2_snap_name() is not
useful either, so get rid of that too.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This patch makes rbd_add_parse_args() be the single place all
argument parsing occurs for an image map request:
- Move the ceph_parse_options() call into that function
- Use local variables rather than parameters to hold the list
of monitor addresses supplied
- Rather than returning it, pass the snapshot name (and its
length) back via parameters
- Have the function return a ceph_options structure pointer
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Move option parsing out of rbd_get_client() and into its caller.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
A Boolean field "snap_exists" in an rbd mapping is used to indicate
whether a mapped snapshot has been removed from an image's snapshot
context, to stop sending requests for that snapshot as soon as we
know it's gone.
Generalize the interpretation of this field so it applies to
non-snapshot (i.e. "head") mappings. That is, define its value
to be false until the mapping has been set, and then define it to be
true for both snapshot mappings or head mappings.
Rename the field "exists" to reflect the broader interpretation.
The rbd_mapping structure is on its way out, so move the field
back into the rbd_device structure.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Moving the snap_id and snap_name fields into the separate
rbd_mapping structure was misguided. (And in time, perhaps
we'll do away with that structure altogether...)
Move these fields back into struct rbd_device.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
If a format 2 image has a parent, its pool id will be specified
using a 64-bit value. Change the pool id we save for an image to
match that.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
If rbd_dev_snaps_update() has ever been called for an rbd device
structure there could be snapshot structures on its snaps list.
In rbd_add(), this function is called but a subsequent error
path neglected to clean up any of these snapshots.
Add a call to rbd_remove_all_snaps() in the appropriate spot to
remedy this. Change a couple of error labels to be a little
clearer while there.
Drop the leading underscores from the function name; there's nothing
special about that function that they might signify. As suggested
in review, the leading underscores in __rbd_remove_snap_dev() have
been removed as well.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When processing a request, rbd_rq_fn() makes clones of the bio's in
the request's bio chain and submits the results to osd's to be
satisfied. If a request bio straddles the boundary between objects
backing the rbd image, it must be represented by two cloned bio's,
one for the first part (at the end of one object) and one for the
second (at the beginning of the next object).
This has been handled by a function bio_chain_clone(), which
includes an interface only a mother could love, and which has
been found to have other problems.
This patch defines two new fairly generic bio functions (one which
replaces bio_chain_clone()) to help out the situation, and then
revises rbd_rq_fn() to make use of them.
First, bio_clone_range() clones a portion of a single bio, starting
at a given offset within the bio and including only as many bytes
as requested. As a convenience, a request to clone the entire bio
is passed directly to bio_clone().
Second, bio_chain_clone_range() performs a similar function,
producing a chain of cloned bio's covering a sub-range of the
source chain. No bio_pair structures are used, and if successful
the result will represent exactly the specified range.
Using bio_chain_clone_range() makes bio_rq_fn() a little easier
to understand, because it avoids the need to pass very much
state information between consecutive calls. By avoiding the need
to track a bio_pair structure, it also eliminates the problem
described here: http://tracker.newdream.net/issues/2933
Note that a block request (and therefore the complete length of
a bio chain processed in rbd_rq_fn()) is an unsigned int, while
the result of rbd_segment_length() is u64. This change makes
this range trunctation explicit, and trips a bug if the the
segment boundary is too far off.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The rbd_device structure has an embedded rbd_options structure.
Such a structure is needed to work with the generic ceph argument
parsing code, but there's no need to keep it around once argument
parsing is done.
Use a local variable to hold the rbd options used in parsing in
rbd_get_client(), and just transfer its content (it's just a
read_only flag) into the field in the rbd_mapping sub-structure
that requires that information.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
The aim of this patch is to make what's going on rbd_merge_bvec() a
bit more obvious than it was before. This was an issue when a
recent btrfs bug led us to question whether the merge function was
working correctly.
Use "obj" rather than "chunk" to indicate the units whose boundaries
we care about we call (rados) "objects".
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
Change RBD_MAX_SNAP_NAME_LEN to be based on NAME_MAX. That is a
practical limit for the length of a snapshot name (based on the
presence of a directory using the name under /sys/bus/rbd to
represent the snapshot).
The /sys entry is created by prefixing it with "snap_"; define that
prefix symbolically, and take its length into account in defining
the snapshot name length limit.
Enforce the limit in rbd_add_parse_args(). Also delete a dout()
call in that function that was not meant to be committed.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This adds a verification that an rbd image's object order is
within the upper and lower bounds supported by this implementation.
It must be at least 9 (SECTOR_SHIFT), because the Linux bio system
assumes that minimum granularity.
It also must be less than 32 (at the moment anyway) because there
exist spots in the code that store the size of a "segment" (object
backing an rbd image) in a signed int variable, which can be 32 bits
including the sign. We should be able to relax this limit once
we've verified the code uses 64-bit types where needed.
Note that the CLI tool already limits the order to the range 12-25.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The two calls to rbd_do_op() from rbd_rq_fn() differ only in the
value passed for the snapshot id and the snapshot context.
For reads the snapshot always comes from the mapping, and for writes
the snapshot id is always CEPH_NOSNAP.
The snapshot context is always null for reads. For writes, the
snapshot context always comes from the rbd header, but it is
acquired under protection of header semaphore and could change
thereafter, so we can't simply use what's available inside
rbd_do_op().
Eliminate the snapid parameter from rbd_do_op(), and set it
based on the I/O direction inside that function instead. Always
pass the snapshot context acquired in the caller, but reset it
to a null pointer inside rbd_do_op() if the operation is a read.
As a result, there is no difference in the read and write calls
to rbd_do_op() made in rbd_rq_fn(), so just call it unconditionally.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The only callers of rbd_do_op() are in rbd_rq_fn(), where call one
is used for writes and the other used for reads. The request passed
to rbd_do_op() already encodes the I/O direction, and that
information can be used inside the function to set the opcode and
flags value (rather than passing them in as arguments).
So get rid of the opcode and flags arguments to rbd_do_op().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Both rbd_req_read() and rbd_req_write() are simple wrapper routines
for rbd_do_op(), and each is only called once. Replace each wrapper
call with a direct call to rbd_do_op(), and get rid of the wrapper
functions.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The name of the "read-only" mapping option was inadvertently changed
in this commit:
f84344f3 rbd: separate mapping info in rbd_dev
Revert that hunk to return it to what it should be.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When rbd_dev_probe() calls rbd_dev_image_id() it expects to get
a 0 return code if successful, but it is getting a positive value.
The reason is that rbd_dev_image_id() returns the value it gets from
rbd_req_sync_exec(), which returns the number of bytes read in as a
result of the request. (This ultimately comes from
ceph_copy_from_page_vector() in rbd_req_sync_op()).
Force the return value to 0 when successful in rbd_dev_image_id().
Do the same in rbd_dev_v2_object_prefix().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
In rbd_dev_id_put(), there's a loop that's intended to determine
the maximum device id in use. But it isn't doing that at all,
the effect of how it's written is to simply use the just-put id
number, which ignores whole purpose of this function.
Fix the bug.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Now that v2 images support is fully implemented, have
rbd_dev_v2_probe() return 0 to indicate a successful probe.
(Note that an image that implements layering will fail
the probe early because of the feature chekc.)
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Version 2 images have two sets of feature bit fields. The first
indicates features possibly used by the image. The second indicates
features that the client *must* support in order to use the image.
When an image (or snapshot) is first examined, we need to make sure
that the local implementation supports the image's required
features. If not, fail the probe for the image.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Define a new function rbd_dev_v2_refresh() to update/refresh the
snapshot context for a format version 2 rbd image. This function
will update anything that is not fixed for the life of an rbd
image--at the moment this is mainly the snapshot context and (for
a base mapping) the size.
Update rbd_refresh_header() so it selects which function to use
based on the image format.
Rename __rbd_refresh_header() to be rbd_dev_v1_refresh()
to be consistent with the naming of its version 2 counterpart.
Similarly rename rbd_refresh_header() to be rbd_dev_refresh().
Unrelated--we use rbd_image_format_valid() here. Delete the other
use of it, which was primarily put in place to ensure that function
was referenced at the time it was defined.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Encapsulate the code that handles updating the size of a mapping
after an rbd image has been refreshed. This is done in anticipation
of the next patch, which will make this common code for format 1 and
2 images.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This shouldn't actually be possible because the layout struct is
constructed from the RBD header and validated then.
[elder@inktank.com: converted BUG() call to equivalent rbd_assert()]
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
There are three fields that are not yet updated for format 2 rbd
image headers: the version of the header object; the encryption
type; and the compression type. There is no interface defined for
fetching the latter two, so just initialize them explicitly to 0 for
now.
Change rbd_dev_v2_snap_context() so the caller can be supplied the
version for the header object.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Define rbd_dev_v2_snap_name() to fetch the name for a particular
snapshot in a format 2 rbd image.
Define rbd_dev_v2_snap_info() to to be a wrapper for getting the
name, size, and features for a particular snapshot, using an
interface that matches the equivalent function for version 1 images.
Define rbd_dev_snap_info() wrapper function and use it to call the
appropriate function for getting the snapshot name, size, and
features, dependent on the rbd image format.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Fetch the snapshot context for an rbd format 2 image by calling
the "get_snapcontext" method on its header object.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The features values for an rbd format 2 image are fetched from the
server using a "get_features" method. The same method is used for
getting the features for a snapshot, so structure this addition with
a generic helper routine that can get this information for either.
The server will provide two 64-bit feature masks, one representing
the features potentially in use for this image (or its snapshot),
and one representing features that must be supported by the client
in order to work with the image.
For the time being, neither of these is really used so we keep
things simple and just record the first feature vector. Once we
start using these feature masks, what we record and what we expose
to the user will most likely change.
Signed-off-by: Alex Elder <elder@inktank.com>
The object prefix of an rbd format 2 image is fetched from the
server using a "get_object_prefix" method.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The size of an rbd format 2 image is fetched from the server using a
"get_size" method. The same method is used for getting the size of
a snapshot, so structure this addition with a generic helper routine
that we can get this information for either.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This defines a new function rbd_dev_probe() as a top-level
function for populating detailed information about an rbd device.
It first checks for the existence of a format 2 rbd image id object.
If it exists, the image is assumed to be a format 2 rbd image, and
another function rbd_dev_v2() is called to finish populating
header data for that image. If it does not exist, it is assumed to
be an old (format 1) rbd image, and calls a similar function
rbd_dev_v1() to populate its header information.
A new field, rbd_dev->format, is defined to record which version
of the rbd image format the device represents. For a valid mapped
rbd device it will have one of two values, 1 or 2.
So far, the format 2 images are not really supported; this is
laying out the infrastructure for fleshing out that support.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Create a function that encapsulates looking up the name, size and
features related to a given snapshot, which is indicated by its
index in an rbd device's snapshot context array of snapshot ids.
This interface will be used to hide differences between the format 1
and format 2 images.
At the moment this (looking up the name anyway) is slightly less
efficient than what's done currently, but we may be able to optimize
this a bit later on by cacheing the last lookup if it proves to be a
problem.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Record the features values for each rbd image and each of its
snapshots. This is really something that only becomes meaningful
for version 2 images, so this is just putting in place code
that will form common infrastructure.
It may be useful to expand the sysfs entries--and therefore the
information we maintain--for the image and for each snapshot.
But I'm going to hold off doing that until we start making
active use of the feature bits.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Pass the snapshot id and snapshot size rather than an index
to __rbd_add_snap_dev() to specify values for a new snapshot.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Josh proposed the following change, and I don't think I could
explain it any better than he did:
From: Josh Durgin <josh.durgin@inktank.com>
Date: Tue, 24 Jul 2012 14:22:11 -0700
To: ceph-devel <ceph-devel@vger.kernel.org>
Message-ID: <500F1203.9050605@inktank.com>
Right now the kernel still has one piece of rbd management
duplicated from the rbd command line tool: snapshot creation.
There's nothing special about snapshot creation that makes it
advantageous to do from the kernel, so I'd like to remove the
create_snap sysfs interface. That is,
/sys/bus/rbd/devices/<id>/create_snap
would be removed.
Does anyone rely on the sysfs interface for creating rbd
snapshots? If so, how hard would it be to replace with:
rbd snap create pool/image@snap
Is there any benefit to the sysfs interface that I'm missing?
Josh
This patch implements this proposal, removing the code that
implements the "snap_create" sysfs interface for rbd images.
As a result, quite a lot of other supporting code goes away.
Suggested-by: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
New format 2 rbd images are permanently identified by a unique image
id. Each rbd image also has a name, but the name can be changed.
A format 2 rbd image will have an object--whose name is based on the
image name--which maps an image's name to its image id.
Create a new function rbd_dev_image_id() that checks for the
existence of the image id object, and if it's found, records the
image id in the rbd_device structure.
Create a new rbd device attribute (/sys/bus/rbd/<num>/image_id) that
makes this information available.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
An OSD object method call can be made using rbd_req_sync_exec().
Until now this has only been used for creating a new RBD snapshot,
and that has only required sending data out, not receiving anything
back from the OSD.
We will now need to get data back from an OSD on a method call, so
add parameters to rbd_req_sync_exec() that allow a buffer into which
returned data should be placed to be specified, along with its size.
Previously, rbd_req_sync_exec() passed a null pointer and zero
size to rbd_req_sync_op(); change this so the new inbound buffer
information is provided instead.
Rename the "buf" and "len" parameters in rbd_req_sync_op() to
make it more obvious they are describing inbound data.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In order to allow both read requests and write requests to be
initiated using rbd_req_sync_exec(), add an OSD flags value
which can be passed down to rbd_req_sync_op(). Rename the "data"
and "len" parameters to be more clear that they represent data
that is outbound.
At this point, this function is still only used (and only works) for
write requests.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
We're ready to handle header object (refresh) events at the point we
call rbd_bus_add_dev(). Set up the watch request on the rbd image
header just after that, and after we've registered the devices for
the snapshots for the initial snapshot context. Do this before
announce the disk as available for use.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Move the setting of the initial capacity for an rbd image mapping
into rb_init_disk().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
By the time rbd_dev_snaps_register() gets called during rbd device
initialization, the main device will have already been registered.
Similarly, a header refresh will only occur for an rbd device whose
Linux device is registered. There is therefore no need to verify
the main device is registered when registering a snapshot device.
For the time being, turn the check into a WARN_ON(), but it can
eventually just go away.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Call rbd_init_disk() from rbd_add() as soon as we have the major
device number for the mapping.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Hold off setting the device id and formatting the device name
in rbd_add() until just before it's needed.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Read the rbd header information and call rbd_dev_set_mapping()
earlier--before registering the block device or setting up the sysfs
entries for the image. The sysfs entries provide users access to
some information that's only available after doing the rbd header
initialization, so this will make sure it's valid right away.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
rbd_header_set_snap() is a simple initialization routine for an rbd
device's mapping. It has to be called after the snapshot context
for the rbd_dev has been updated, but can be done before snapshot
devices have been registered.
Change the name to rbd_dev_set_mapping() to better reflect its
purpose, and call it a little sooner, before registering snapshot
devices.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When a new snapshot is found in an rbd device's updated snapshot
context, __rbd_add_snap_dev() is called to create and insert an
entry in the rbd devices list of snapshots. In addition, a Linux
device is registered to represent the snapshot.
For version 2 rbd images, it will be undesirable to initialize the
device right away. So in anticipation of that, this patch separates
the insertion of a snapshot entry in the snaps list from the
creation of devices for those snapshots.
To do this, create a new function rbd_dev_snaps_register() which
traverses the list of snapshots and calls rbd_register_snap_dev()
on any that have not yet been registered.
Rename rbd_dev_snap_devs_update() to be rbd_dev_snaps_update()
to better reflect that only the entry in the snaps list and not
the snapshot's device is affected by the function.
For now, call rbd_dev_snaps_register() immediately after each
call to rbd_dev_snaps_update().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Move the assignment of the header name for an rbd image a bit later,
outside rbd_add_parse_args() and into its caller.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
An rbd_dev structure maintains a list of current snapshots that have
already been fully initialized. The entries on the list have type
struct rbd_snap, and each entry contains a copy of information
that's found in the rbd_dev's snapshot context and header.
The only caller of snap_by_name() is rbd_header_set_snap(). In that
call site any positive return value (the index in the snapshot
array) is ignored, so there's no need to return the index in
the snapshot context's id array when it's found.
rbd_header_set_snap() also has only one caller--rbd_add()--and that
call is made after a call to rbd_dev_snap_devs_update(). Because
the rbd_snap structures are initialized in that function, the
current snapshot list can be used instead of the snapshot context to
look up a snapshot's information by name.
Change snap_by_name() so it uses the snapshot list rather than the
rbd_dev's snapshot context in looking up snapshot information.
Return 0 if it's found rather than the snapshot id.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When rbd_bus_add_dev() is called (one spot--in rbd_add()), the rbd
image header has not even been read yet. This means that the list
of snapshots will be empty at the time of the call. As a result,
there is no need for the code that calls rbd_register_snap_dev()
for each entry in that list--so get rid of it.
Once the header has been read (just after returning), a call will
be made to rbd_dev_snap_devs_update(), which will then find every
snapshot in the context to be new and will therefore call
rbd_register_snap_dev() via __rbd_add_snap_dev() accomplishing
the same thing.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Move the calls to get the header semaphore out of
rbd_header_set_snap() and into its caller.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This just simplifies a few things in rbd_init_disk(), now that the
previous patch has moved a bunch of initialization code out if it.
Done separately to facilitate review.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Move some of the code that initializes an rbd header out of
rbd_init_disk() and into its caller.
Move the code at the end of rbd_init_disk() that sets the device
capacity and activates the Linux device out of that function and
into the caller, ensuring we still have the disk size available
where we need it.
Update rbd_free_disk() so it still aligns well as an inverse of
rbd_init_disk(), moving the rbd_header_free() call out to its
caller.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There is only one caller of snap_by_name(), and it passes two values
to be assigned, both of which are found within an rbd device
structure.
Change the interface so it just passes the address of the rbd_dev,
and make the assignments to its fields directly.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
With the exception of the snapshot name, all of the mapping-specific
fields in an rbd device structure are set in rbd_header_set_snap().
Pass the snapshot name to be assigned into rbd_header_set_snap()
to keep all of the mapping assignments together.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This is the first of two patches aimed at isolating the code that
sets the mapping information into a single spot.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Add the size of the mapped image to the set of mapping-specific
fields in an rbd_device, and use it when setting the capacity of the
disk.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Several fields in a struct rbd_dev are related to what is mapped, as
opposed to the actual base rbd image. If the base image is mapped
these are almost unneeded, but if a snapshot is mapped they describe
information about that snapshot.
In some contexts this can be a little bit confusing. So group these
mapping-related field into a structure to make it clear what they
are describing.
This also includes a minor change that rearranges the fields in the
in-core image header structure so that invariant fields are at the
top, followed by those that change.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The "total_snaps" field in an rbd header structure is never any
different from the value of "num_snaps" stored within a snapshot
context. Avoid any confusion by just using the value held within
the snapshot context, and get rid of the "total_snaps" field.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
A copy of rbd_dev->disk->queue is held in rbd_dev->q, but it's
never actually used. So get just get rid of the field.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The name __rbd_init_snaps_header() doesn't really convey what that
function does very well. Its purpose is to scan a new snapshot
context and either create or destroy snapshot device entries so
that local host's view is consistent with the reality maintained
on the OSDs. This patch just changes the name of this function,
to be rbd_dev_snap_devs_update(). Still not perfect, but I think
better.
Also add some dynamic debug statements to this function.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This should have been done as part of this commit:
commit de71a2970d
Author: Alex Elder <elder@inktank.com>
Date: Tue Jul 3 16:01:19 2012 -0500
rbd: rename rbd_device->id
rbd_id_get() is assigning the rbd_dev->dev_id field. Change the
name of that function as well as rbd_id_put() and rbd_id_max
to reflect what they are affecting.
Add some dynamic debug statements related to rbd device id activity.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Define rbd_assert() and use it in place of various BUG_ON() calls
now present in the code. By default assertion checking is enabled;
we want to do this differently at some point.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There are two places where rbd_get_segment() is called. One, in
rbd_rq_fn(), only needs to know the length within a segment that an
I/O request should be. The other, in rbd_do_op(), also needs the
name of the object and the offset within it for the I/O request.
Split out rbd_segment_name() into three dedicated functions:
- rbd_segment_name() allocates and formats the name of the
object for a segment containing a given rbd image offset
- rbd_segment_offset() computes the offset within a segment for
a given rbd image offset
- rbd_segment_length() computes the length to use for I/O within
a segment for a request, not to exceed the end of a segment
object.
In the new functions be a bit more careful, checking for possible
error conditions:
- watch for errors or overflows returned by snprintf()
- catch (using BUG_ON()) potential overflow conditions
when computing segment length
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
It is possible in rbd_get_num_segments() for an overflow to occur
when adding the offset and length. This is easily avoided.
Since the function returns an int and the one caller is already
prepared to handle errors, have it return -ERANGE if overflow would
occur.
The overflow check would not work if a zero-length request was
being tested, so short-circuit that case, returning 0 for the
number of segments required. (This condition might be avoided
elsewhere already, I don't know.)
Have the caller end the request if either an error or 0 is returned.
The returned value is passed to __blk_end_request_all(), meaning
a 0 length request is not treated an error.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
There's a test for null rq pointer inside the while loop in
rbd_rq_fn() that's not needed. That same test already occurred
in the immediatly preceding loop condition test.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
In bio_chain_clone(), at the end of the function the bi_next field
of the tail of the new bio chain is nulled. This isn't necessary,
because if "tail" is non-null, its value will be the last bio
structure allocated at the top of the while loop in that function.
And before that structure is added to the end of the new chain, its
bi_next pointer is always made null.
While touching that function, clean a few other things:
- define each local variable on its own line
- move the definition of "tmp" to an inner scope
- move the modification of gfpmask closer to where it's used
- rearrange the logic that sets the chain's tail pointer
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
The "notify_timeout" rbd device option is never used, so get rid of
it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
Add the ability to map an rbd image read-only, by specifying either
"read_only" or "ro" as an option on the rbd "command line." Also
allow the inverse to be explicitly specified using "read_write" or
"rw".
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
The rbd options don't really apply to the ceph client. So don't
store a pointer to it in the ceph_client structure, and put them
(a struct, not a pointer) into the rbd_dev structure proper.
Pass the rbd device structure to rbd_client_create() so it can
assign rbd_dev->rbdc if successful, and have it return an error code
instead of the rbd client pointer.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
This just rearranges things a bit more in rbd_header_from_disk()
so that the snapshot sizes are initialized right after the buffer
to hold them is allocated and doing a little further consolidation
that follows from that. Also adds a few simple comments.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
The only thing the on-disk snap_names_len field is needed is to
size the buffer allocated to hold a copy of the snapshot names
for an rbd image.
So don't bother saving it in the in-core rbd_image_header structure.
Just use a local variable to hold the required buffer size while
it's needed.
Move the code that actually copies the snapshot names up closer
to where the required length is saved.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
In rbd_header_from_disk() the object prefix buffer is sized based on
the maximum size it's block_name equivalent on disk could be.
Instead, only allocate enough to hold null-terminated string from
the on-disk header--or the maximum size of no NUL is found.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
There is only caller of __rbd_client_find(), and it somewhat
clumsily gets the appropriate lock and gets a reference to the
existing ceph_client structure if it's found.
Instead, have that function handle its own locking, and acquire the
reference if found while it holds the lock. Drop the underscores
from the name because there's no need to signify anything special
about this function.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
This fixes a bug that went in with this commit:
commit f6e0c99092cca7be00fca4080cfc7081739ca544
Author: Alex Elder <elder@inktank.com>
Date: Thu Aug 2 11:29:46 2012 -0500
rbd: simplify __rbd_init_snaps_header()
The problem is that a new rbd snapshot needs to go either after an
existing snapshot entry, or at the *end* of an rbd device's snapshot
list. As originally coded, it is placed at the beginning. This was
based on the assumption the list would be empty (so it wouldn't
matter), but in fact if multiple new snapshots are added to an empty
list in one shot the list will be non-empty after the first one is
added.
This addresses http://tracker.newdream.net/issues/3063
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In the on-disk image header structure there is a field "block_name"
which represents what we now call the "object prefix" for an rbd
image. Rename this field "object_prefix" to be consistent with
modern usage.
This appears to be the only remaining vestige of the use of "block"
in symbols that represent objects in the rbd code.
This addresses http://tracker.newdream.net/issues/1761
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Reviewed-by: Dan Mick <dan.mick@inktank.com>
Right now rbd_read_header() both reads the header object for an rbd
image and decodes its contents. It does this repeatedly if needed,
in order to ensure a complete and intact header is obtained.
Separate this process into two steps--reading of the raw header
data (in new function, rbd_dev_v1_header_read()) and separately
decoding its contents (in rbd_header_from_disk()). As a result,
the latter function no longer requires its allocated_snaps argument.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Add checks on the validity of the snap_count and snap_names_len
field values in rbd_dev_ondisk_valid(). This eliminates the
need to do them in rbd_header_from_disk().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The only caller of rbd_header_from_disk() is rbd_read_header().
It passes as allocated_snaps the number of snapshots it will
have received from the server for the snapshot context that
rbd_header_from_disk() is to interpret. The first time through
it provides 0--mainly to extract the number of snapshots from
the snapshot context header--so that it can allocate an
appropriately-sized buffer to receive the entire snapshot
context from the server in a second request.
rbd_header_from_disk() will not fill in the array of snapshot ids
unless the number in the snapshot matches the number the caller
had allocated.
This patch adjusts that logic a little further to be more efficient.
rbd_read_header() doesn't even examine the snapshot context unless
the snapshot count (stored in header->total_snaps) matches the
number of snapshots allocated. So rbd_header_from_disk() doesn't
need to allocate or fill in the snapshot context field at all in
that case.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This just moves code around for the most part. It was pulled out as
a separate patch to avoid cluttering up some upcoming patches which
are more substantive. The point is basically to group everything
related to initializing the snapshot context together.
The only functional change is that rbd_header_from_disk() now
ensures the (in-core) header it is passed is zero-filled. This
allows a simpler error handling path in rbd_header_from_disk().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Fix a few spots in rbd_header_from_disk() to use sizeof (object)
rather than sizeof (type). Use a local variable to record sizes
to shorten some lines and improve readability.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Fix a number of spots where a pointer value that is known to
have become invalid but was not reset to null.
Also, toss in a change so we use sizeof (object) rather than
sizeof (type).
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The snap_names_len field of an rbd_image_header structure is defined
with type size_t. That field is used as both the source and target
of 64-bit byte-order swapping operations though, so it's best to
define it with type u64 instead.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The purpose of __rbd_init_snaps_header() is to compare a new
snapshot context with an rbd device's list of existing snapshots.
It updates the list by adding any new snapshots or removing any
that are not present in the new snapshot context.
The code as written is a little confusing, because it traverses both
the existing snapshot list and the set of snapshots in the snapshot
context in reverse. This was done based on an assumption about
snapshots that is not true--namely that a duplicate snapshot name
could cause an error in intepreting things if they were not
processed in ascending order.
These precautions are not necessary, because:
- all snapshots are uniquely identified by their snapshot id
- a new snapshot cannot be created if the rbd device has another
snapshot with the same name
(It is furthermore not currently possible to rename a snapshot.)
This patch re-implements __rbd_init_snaps_header() so it passes
through both the existing snapshot list and the entries in the
snapshot context in forward order. It still does the same thing
as before, but I find the logic considerably easier to understand.
By going forward through the names in the snapshot context, there
is no longer a need for the rbd_prev_snap_name() helper function.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
If a read-only rbd device is opened for writing in rbd_open(), it
returns without dropping the just-acquired device reference.
Fix this by moving the read-only check before getting the reference.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Create a simple helper that handles the common case of calling
__rbd_refresh_header() while holding the ctl_mutex.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Add a new parameter to __rbd_refresh_header() through which the
version of the header object is passed back to the caller. In most
cases this isn't needed. The main motivation is to normalize
(almost) all calls to __rbd_refresh_header() so they are all
wrapped immediately by mutex_lock()/mutex_unlock().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This fixes a few issues in rbd_header_from_disk():
- There is a check intended to catch overflow, but it's wrong in
two ways.
- First, the type we don't want to overflow is size_t, not
unsigned int, and there is now a SIZE_MAX we can use for
use with that type.
- Second, we're allocating the snapshot ids and snapshot
image sizes separately (each has type u64; on disk they
grouped together as a rbd_image_header_ondisk structure).
So we can use the size of u64 in this overflow check.
- If there are no snapshots, then there should be no snapshot
names. Enforce this, and issue a warning if we encounter a
header with no snapshots but a non-zero snap_names_len.
- When saving the snapshot names into the header, be more direct
in defining the offset in the on-disk structure from which
they're being copied by using "snap_count" rather than "i"
in the array index.
- If an error occurs, the "snapc" and "snap_names" fields are
freed at the end of the function. Make those fields be null
pointers after they're freed, to be explicit that they are
no longer valid.
- Finally, move the definition of the local variable "i" to the
innermost scope in which it's needed.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
All of the callers of rbd_req_sync_op() except one pass a non-null
"ops" pointer. The only one that does not is rbd_req_sync_read(),
which passes CEPH_OSD_OP_READ as its "opcode" and, CEPH_OSD_FLAG_READ
for "flags".
By allocating the ops array in rbd_req_sync_read() and moving the
special case code for the null ops pointer into it, it becomes
clear that much of that code is not even necessary.
In addition, the "opcode" argument to rbd_req_sync_op() is never
actually used, so get rid of that.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
rbd_header_add_snap() passes the address of a version variable to
rbd_req_sync_exec(), but it ignores the result. Just pass a null
pointer instead.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Either rbd_create_rw_ops() will succeed, or it will fail because a
memory allocation failed. Have it just return a valid pointer or
null rather than stuffing a pointer into a provided address and
returning an errno.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
It's not obvious whether the snapshot pointer whose address is
provided to __rbd_add_snap_dev() will be assigned by that function.
Change it to return the snapshot, or a pointer-coded errno in the
event of a failure.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
rbd_req_sync_unwatch() only ever uses rbd_dev->header_name as the
value of its "object_name" parameter, and that value is available
within the function already. So get rid of the parameter.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
rbd_req_sync_notify_ack() only ever uses rbd_dev->header_name as the
value of its "object_name" parameter, and that value is available
within the function already. So get rid of the parameter.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
rbd_req_sync_notify() only ever uses rbd_dev->header_name as the
value of its "object_name" parameter, and that value is available
within the function already. So get rid of the parameter.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
rbd_req_sync_watch() is only called in one place, and in that place
it passes rbd_dev->header_name as the value of the "object_name"
parameter. This value is available within the function already.
Having the extra parameter leaves the impression the object name
could take on different values, but it does not.
So get rid of the parameter. We can always add it back again if
we find we want to watch some other object in the future.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Both rbd_register_snap_dev() and __rbd_remove_snap_dev() have
rbd_dev parameters that are unused. Remove them.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The function rbd_header_from_disk() is only called in one spot, and
it passes GFP_KERNEL as its value for the gfp_flags parameter.
Just drop that parameter and substitute GFP_KERNEL everywhere within
that function it had been used. (If we find we need the parameter
again in the future it's easy enough to add back again.)
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The "snapc" parameter to in rbd_req_sync_read() is not used, so
get rid of it.
Reported-by: Josh Durgin <josh.durgin@inktank.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The "id" field of an rbd device structure represents the unique
client-local device id mapped to the underlying rbd image. Each rbd
image will have another id--the image id--and each snapshot has its
own id as well. The simple name "id" no longer conveys the
information one might like to have.
Rename the device "id" field in struct rbd_dev to be "dev_id" to
make it a little more obvious what we're dealing with without having
to think more about context.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
If an rbd image header is read and it doesn't begin with the
expected magic information, a warning is displayed. This is
a fairly simple test, but it could be extended at some point.
Fix the comparison so it actually looks at the "text" field
rather than the front of the structure.
In any case, encapsulate the validity test in its own function.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There was a dout() call in rbd_do_request() that was reporting
the reporting the offset as the length and vice versa. While
fixing that I did a quick scan of other dout() calls and fixed
a couple of other minor things.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This just replaces a while loop with list_for_each_entry_safe()
in __rbd_remove_all_snaps().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In commit c666601a there was inadvertently added an extra
initialization of rbd_dev->header_rwsem. This gets rid of the
duplicate.
Reported-by: Guangliang Zhao <gzhao@suse.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The snap_seq field in an rbd_image_header structure held the value
from the rbd image header when it was last refreshed. We now
maintain this value in the snapc->seq field. So get rid of the
other one.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In rbd_header_add_snap() there is code to set snapc->seq to the
just-added snapshot id. This is the only remnant left of the
use of that field for recording which snapshot an rbd_dev was
associated with. That functionality is no longer supported,
so get rid of that final bit of code.
Doing so means we never actually set snapc->seq any more. On the
server, the snapshot context's sequence value represents the highest
snapshot id ever issued for a particular rbd image. So we'll make
it have that meaning here as well. To do so, set this value
whenever the rbd header is (re-)read. That way it will always be
consistent with the rest of the snapshot context we maintain.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In rbd_header_set_snap(), there is logic to make the snap context's
seq field get set to a particular snapshot id, or 0 if there is no
snapshot for the rbd image.
This seems to be an artifact of how the current snapshot id for an
rbd_dev was recorded before the rbd_dev->snap_id field began to be
used for that purpose.
There's no need to update the value of snapc->seq here any more, so
stop doing it. Tidy up a few local variables in that function
while we're at it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In what appears to be an artifact of a different way of encoding
whether an rbd image maps a snapshot, __rbd_refresh_header() has
code that arranges to update the seq value in an rbd image's
snapshot context to point to the first entry in its snapshot
array if that's where it was pointing initially.
We now use rbd_dev->snap_id to record the snapshot id--using the
special value CEPH_NOSNAP to indicate the rbd_dev is not mapping a
snapshot at all.
There is therefore no need to check for this case, nor to update the
seq value, in __rbd_refresh_header(). Just preserve the seq value
that rbd_read_header() provides (which, at the moment, is nothing).
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Previously the original header version was sent. Now, we update it
when the header changes.
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@inktank.com>
This prevents a race between requests with a given snap context and
header updates that free it. The osd client was already expecting the
snap context to be reference counted, since it get()s it in
ceph_osdc_build_request and put()s it when the request completes.
Also remove the second down_read()/up_read() on header_rwsem in
rbd_do_request, which wasn't actually preventing this race or
protecting any other data.
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@inktank.com>
If an image was mapped to a snapshot, the size of the head version
would be shown. Protect capacity with header_rwsem, since it may
change.
Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Snapshots cannot be resized, and the new capacity of head should not
be reflected by the snapshot.
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
When a snapshot is deleted, the OSD will return ENOENT when reading
from it. This is normally interpreted as a hole by rbd, which will
return zeroes. To minimize the time in which this can happen, stop
requests early when we are notified that our snapshot no longer
exists.
[elder@inktank.com: updated __rbd_init_snaps_header() logic]
Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Several functions include a num_reply parameter, but it is never
used. Just get rid of it everywhere--it seems to be something
that never got fully implemented.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Use the name "ceph_opts" consistently (rather than just "opt") for
pointers to a ceph_options structure.
Change the few spots that don't use "rbd_opts" for a rbd_options
pointer to match the rest.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Rename variables named "obj" which represent object names so they're
consistently named "object_name".
Rename the "cls" and "method" parameters in rbd_req_sync_exec()
to be "class_name" and "method_name", and make similar changes
to the names of local variables in that function representing
the lengths of those names.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
An rbd image is not a single object, but a logical construct made up
of an aggregation of objects.
Rename some fields in struct rbd_dev, in hopes of reinforcing this.
obj --> image_name
obj_len --> image_name_len
obj_md_name --> header_name
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Most variables that represent a struct rbd_device are named
"rbd_dev", but in some cases "dev" is used instead. Change all the
"dev" references so they use "rbd_dev" consistently, to make it
clear from the name that we're working with an RBD device (as
opposed to, for example, a struct device). Similarly, change the
name of the "dev" field in struct rbd_notify_info to be "rbd_dev".
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There is no need to impose a small limit the length of the snapshot
name recorded for an rbd image in a struct rbd_dev. Remove the
limitation by allocating space for the snapshot name dynamically.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There is no need to impose a small limit the length of the rbd image
name recorded in a struct rbd_dev. Remove the limitation by
allocating space for the image name dynamically.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There is no need to impose a small limit the length of the header
name recorded for an rbd image in a struct rbd_dev. Remove the
limitation by allocating space for the header name dynamically.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There is no need to impose a small limit the length of the object
prefix recorded for an rbd image in a struct rbd_image_header.
Remove the limitation by allocating space for the object prefix
dynamically.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There is no need to impose a small limit the length of the pool name
recorded for an rbd image in a struct rbd_device. Remove the
limitation by allocating space for the pool name ynamically.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Add an entry under /sys/bus/rbd/devices/<N>/ named "pool_id" that
provides the id for the pool the rbd image is assocatied with. This
is in addition to the pool name already provided.
Rename the "poolid" field in struct rbd_device to be "pool_id".
Update the documentation to reflect the addition of this new entry.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Each rbd image has a name that forms the basis of all data objects
backing the device. Old (format 1) images refer to this name as the
"block name," while new (format 2) images use the term "object
prefix" for this.
Change the field name in the in-core rbd image header structure to
reflect the more modern usage. We intentionally keep the the name
"block_name" in the on-disk definition for format 1 image headers.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Define a new function dup_token(), to be used during argument
parsing for making dynamically-allocated copies of tokens being
parsed.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In rbd_req_sync_notify_ack(), a local variable was needlessly being
used to hold a null pointer. Just pass NULL instead.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Yehuda Sadeh <yehuda@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Sparse complains about this because:
drivers/block/rbd.c:996:20: warning: cast to restricted __le32
drivers/block/rbd.c:996:20: warning: cast from restricted __le16
These are set in osd_req_encode_op() and they are le16.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Alex Elder