Currently, the perf diff only works with same binaries. That's because
it compares the symbol start address. It doesn't work if the perf.data
comes from different binaries. This patch matches the symbol names.
Actually, perf diff once intended to compare the symbol names. The
commit as below can look for a pair by name.
604c5c9297 (perf diff: Change the default sort order to "dso,symbol")
However, at that time, perf diff used a global list of dsos. That means
the binaries which has same name can only be loaded once. That's a
problem for comparing different binaries.
For example, we have an old binary and an updated binary. They very
likely have same name and most of the functions, so only dsos from old
binary will be loaded. When processing the data from updated binary,
perf still use the symbol information from old binary. That's wrong.
Then the commit as below used IP to replace symbol name.
9c443dfdd3 ("perf diff: Fix support for all --sort combinations")
>From that time, perf diff starts to compare the symbol address.
The global dsos is discarded from a patch in 2010.
a1645ce12a ("perf: 'perf kvm' tool for monitoring guest performance
from host")
However, at that time, perf diff already compared by address. So perf
diff cannot work for different binaries as well.
This patch actually rolls back the perf diff to original design. The
document is also changed, so everybody knows the original design is to
compare the symbol names.
Here are some examples:
The only difference between example_v1.c and example_v2.c is the
location of f2 and f3. There is no change in behavior, but the previous
perf diff display the wrong differential profile.
example_v1.c
noinline void f3(void)
{
volatile int i;
for (i = 0; i < 10000;) {
if(i%2)
i++;
else
i++;
}
}
noinline void f2(void)
{
volatile int a = 100, b, c;
for (b = 0; b < 10000; b++)
c = a * b;
}
noinline void f1(void)
{
f2();
f3();
}
int main()
{
int i;
for (i = 0; i < 100000; i++)
f1();
}
example_v2.c
noinline void f2(void)
{
volatile int a = 100, b, c;
for (b = 0; b < 10000; b++)
c = a * b;
}
noinline void f3(void)
{
volatile int i;
for (i = 0; i < 10000;) {
if(i%2)
i++;
else
i++;
}
}
noinline void f1(void)
{
f2();
f3();
}
int main()
{
int i;
for (i = 0; i < 100000; i++)
f1();
}
[lk@localhost perf_diff]$ gcc example_v1.c -o example
[lk@localhost perf_diff]$ perf record -o example_v1.data ./example
[ perf record: Woken up 4 times to write data ]
[ perf record: Captured and wrote 0.813 MB example_v1.data (~35522 samples) ]
[lk@localhost perf_diff]$ gcc example_v2.c -o example
[lk@localhost perf_diff]$ perf record -o example_v2.data ./example
[ perf record: Woken up 4 times to write data ]
[ perf record: Captured and wrote 0.824 MB example_v2.data (~36015 samples) ]
Old perf diff result:
[lk@localhost perf_diff]$ perf diff example_v1.data example_v2.data
Event 'cycles'
Baseline Delta Shared Object Symbol
........ ....... ................ ...............................
[kernel.vmlinux] [k] __perf_event_task_sched_out
0.00% [kernel.vmlinux] [k] apic_timer_interrupt
[kernel.vmlinux] [k] idle_cpu
[kernel.vmlinux] [k] intel_pstate_timer_func
[kernel.vmlinux] [k] native_read_msr_safe
0.00% [kernel.vmlinux] [k] native_read_tsc
0.00% [kernel.vmlinux] [k] native_write_msr_safe
[kernel.vmlinux] [k] ntp_tick_length
0.00% [kernel.vmlinux] [k] rb_erase
0.00% [kernel.vmlinux] [k] tick_sched_timer
0.00% [kernel.vmlinux] [k] unmap_single_vma
0.00% [kernel.vmlinux] [k] update_wall_time
0.00% example [.] f1
46.24% example [.] f2
53.71% -7.55% example [.] f3
+53.81% example [.] f3
0.02% example [.] main
New perf diff result:
[lk@localhost perf_diff]$ perf diff example_v1.data example_v2.data
[kernel.vmlinux] [k] __perf_event_task_sched_out
0.00% [kernel.vmlinux] [k] apic_timer_interrupt
[kernel.vmlinux] [k] idle_cpu
[kernel.vmlinux] [k] intel_pstate_timer_func
[kernel.vmlinux] [k] native_read_msr_safe
0.00% [kernel.vmlinux] [k] native_read_tsc
0.00% [kernel.vmlinux] [k] native_write_msr_safe
[kernel.vmlinux] [k] ntp_tick_length
0.00% [kernel.vmlinux] [k] rb_erase
0.00% [kernel.vmlinux] [k] tick_sched_timer
0.00% [kernel.vmlinux] [k] unmap_single_vma
0.00% [kernel.vmlinux] [k] update_wall_time
0.00% example [.] f1
46.24% -0.08% example [.] f2
53.71% +0.11% example [.] f3
0.02% example [.] main
Signed-off-by: Kan Liang <kan.liang@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1423460384-11645-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently ->cmp, ->collapse and ->sort callbacks doesn't pass
corresponding fmt. But it'll be needed by upcoming changes in
perf diff command.
Suggested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1420677949-6719-6-git-send-email-namhyung@kernel.org
[ fix build by passing perf_hpp_fmt pointer to hist_entry__cmp_ methods ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the source line is not found fall back to sym + offset. This is
generally much more useful than a raw address.
For this we need to pass in the symbol from the caller.
For some callers it's awkward to compute, so we stay at the old
behaviour.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1415844328-4884-10-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Problem introduced in:
commit 5b59166960 "perf report: Honor column width setting"
Where the left justification signal was after the width, which ended up,
when the width was, say, 11, always printing:
%11.11-s
Instead of src:line left justified and limited to 11 chars.
Resulting in a like:
70.93% %11.11-s [.] f2 tcall
When it should instead be:
70.93% tcall.c:5 [.] f2 tcall
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2xnt0vqkoox52etq2qhyetr0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The branch field sorting code assumes hist_entry::branch_info is
allocated, which is wrong and following perf session ends up with report
segfault.
$ perf record ls
$ perf report -F dso_from
perf: Segmentation fault
Checking that hist_entry::branch_info is valid and display "N/A" string
in snprint callback if it's not.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1413468427-31049-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The branch field sorting code assumes hist_entry::branch_info is
allocated, which is wrong and following perf session ends up with report
segfault.
$ perf record ls
$ perf report -F dso_to
perf: Segmentation fault
Checking that hist_entry::branch_info is valid and display "N/A" string
in snprint callback if it's not.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1413468427-31049-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The branch field sorting code assumes hist_entry::branch_info is
allocated, which is wrong and following perf session ends up with report
segfault.
$ perf record ls
$ perf report -F symbol_from
perf: Segmentation fault
Checking that hist_entry::branch_info is valid and display "N/A" string
in snprint callback if it's not.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1413468427-31049-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The branch field sorting code assumes hist_entry::branch_info is
allocated, which is wrong and following perf session ends up with report
segfault.
$ perf record ls
$ perf report -F symbol_to
perf: Segmentation fault
Checking that hist_entry::branch_info is valid and display "N/A" string
in snprint callback if it's not.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1413468427-31049-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The branch field sorting code assumes hist_entry::branch_info is
allocated, which is wrong and following perf session ends up with report
segfault.
$ perf record ls
$ perf report -F mispredict
perf: Segmentation fault
Checking that hist_entry::branch_info is valid and display "N/A" string
in snprint callback if it's not.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1413468427-31049-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The branch field sorting code assumes hist_entry::branch_info is
allocated, which is wrong and following perf session ends up with report
segfault.
$ perf record ls
$ perf report -F in_tx
perf: Segmentation fault
Checking that hist_entry::branch_info is valid and display "N/A" string
in snprint callback if it's not.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1413468427-31049-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The branch field sorting code assumes hist_entry::branch_info is
allocated, which is wrong and following perf session ends up with report
segfault.
$ perf record ls
$ perf report -F abort
perf: Segmentation fault
Checking that hist_entry::branch_info is valid and display "N/A" string
in snprint callback if it's not.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1413468427-31049-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Not all tools need a hists instance per perf_evsel, so lets pave the way
to remove evsel->hists while leaving a way to access the hists from a
specially allocated evsel, one that comes with space at the end where
lives the evsel.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-qlktkhe31w4mgtbd84035sr2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding support to add field(s) to default field order via using the '+'
prefix, like for report:
$ perf report
Samples: 10 of event 'cycles', Event count (approx.): 4463799
Overhead Command Shared Object Symbol
32.40% ls [kernel.kallsyms] [k] filemap_fault
28.19% ls [kernel.kallsyms] [k] get_page_from_freelist
23.38% ls [kernel.kallsyms] [k] enqueue_entity
15.04% ls [kernel.kallsyms] [k] mmap_region
$ perf report -F +period,sample
Samples: 10 of event 'cycles', Event count (approx.): 4463799
Overhead Period Samples Command Shared Object Symbol
32.40% 1446493 1 ls [kernel.kallsyms] [k] filemap_fault
28.19% 1258486 1 ls [kernel.kallsyms] [k] get_page_from_freelist
23.38% 1043754 1 ls [kernel.kallsyms] [k] enqueue_entity
15.04% 671160 1 ls [kernel.kallsyms] [k] mmap_region
Works in general for commands using --field option.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jean Pihet <jean.pihet@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1408715919-25990-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It makes the code a bit simpler and easier to debug IMHO.
I guess it can also remove similar code in perf diff, but let's keep
it for a future work. :)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1406785662-5534-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Set column width and do not change it if user gives -w/--column-widths
option. It'll truncate longer symbols than the width if exists.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1406785662-5534-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Save column length in the hpp format and pass it to print functions.
This is a preparation for users to control column width in the output.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1406785662-5534-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now perf left-aligns column headers but the contents does not. It
should have same alignment. This requires a change in pid sort key - it
consists of two part (pid and comm). As length of comm can be vary it'd
be better to change the order of them.
Thanks to Jiri Olsa for pointing this out.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1406785662-5534-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Looks better and avoids it moving to the end of the screen as the column
width changes over time in 'perf top'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-yc144ai5jye3yl3h5yxw0scd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In perf's 'mem-mode', one can get access to a whole bunch of details specific to a
particular sample instruction. A bunch of those details relate to the data
address.
One interesting thing you can do with data addresses is to convert them into a unique
cacheline they belong too. Organizing these data cachelines into similar groups and sorting
them can reveal cache contention.
This patch creates an alogorithm based on various sample details that can help group
entries together into data cachelines and allows 'perf report' to sort on it.
The algorithm relies on having proper mmap2 support in the kernel to help determine
if the memory map the data address belongs to is private to a pid or globally shared.
The alogortithm is as follows:
o group cpumodes together
o group entries with discovered maps together
o sort on major, minor, inode and inode generation numbers
o if userspace anon, then sort on pid
o sort on cachelines based on data addresses
The 'dcacheline' sort option in 'perf report' only works in 'mem-mode'.
Sample output:
#
# Samples: 206 of event 'cpu/mem-loads/pp'
# Total weight : 2534
# Sort order : dcacheline,pid
#
# Overhead Samples Data Cacheline Command: Pid
# ........ ............ ...................................................................... ..................
#
13.22% 1 [k] 0xffff88042f08ebc0 swapper: 0
9.27% 1 [k] 0xffff88082e8cea80 swapper: 0
3.59% 2 [k] 0xffffffff819ba180 swapper: 0
0.32% 1 [k] arch_trigger_all_cpu_backtrace_handler_na.23901+0xffffffffffffffe0 swapper: 0
0.32% 1 [k] timekeeper_seq+0xfffffffffffffff8 swapper: 0
Note: Added a '+1' to symlen size in hists__calc_col_len to prevent the next column
from prematurely tabbing over and mis-aligning. Not sure what the problem is.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/r/1401208087-181977-8-git-send-email-dzickus@redhat.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
After output/sort fields refactoring, it's expensive
to check the elide bool in its current location inside
the 'struct sort_entry'.
The perf_hpp__should_skip function gets highly noticable in
workloads with high number of output/sort fields, like for:
$ perf report -i perf-test.data -F overhead,sample,period,comm,pid,dso,symbol,cpu --stdio
Performance report:
9.70% perf [.] perf_hpp__should_skip
Moving the elide bool into the 'struct perf_hpp_fmt', which
makes the perf_hpp__should_skip just single struct read.
Got speedup of around 22% for my test perf.data workload.
The change should not harm any other workload types.
Performance counter stats for (10 runs):
before:
358,319,732,626 cycles ( +- 0.55% )
467,129,581,515 instructions # 1.30 insns per cycle ( +- 0.00% )
150.943975206 seconds time elapsed ( +- 0.62% )
now:
278,785,972,990 cycles ( +- 0.12% )
370,146,797,640 instructions # 1.33 insns per cycle ( +- 0.00% )
116.416670507 seconds time elapsed ( +- 0.31% )
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20140601142622.GA9131@krava.brq.redhat.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
There's no need to setup elide of sort_dso sort entry again
with symbol_conf.dso_list list.
The only difference were list names of memory mode data,
which does not make much sense to me.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1400858147-7155-2-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
When reset_output_field() is called, also reset field/sort order to
NULL so that it can have the default values. It's needed for testing.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
CC: Arun Sharma <asharma@fb.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-26-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Print accumulated stat of a hist entry if requested.
To do that, add new HPP_PERCENT_ACC_FNS macro and generate a
perf_hpp_fmt using it. The __hpp__sort_acc() function sorts entries
by accumulated period value. When accumulated periods of two entries
are same (i.e. single path callchain) put the caller above since
accumulation tends to put callers on higher position for obvious
reason.
Also add "overhead_children" output field to be selected by user.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arun Sharma <asharma@fb.com>
Tested-by: Rodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1401335910-16832-11-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Now we moved to the perf_hpp_[_sort]_list so no need to keep the old
hist_entry__sort_list and sort__first_dimension. Also the
hist_entry__sort_snprintf() can be gone as hist_entry__snprintf()
provides the functionality.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-18-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Currently, what the sort_entry does is just identifying hist entries
so that they can be grouped properly. However, with -F option
support, it indeed needs to sort entries appropriately to be shown to
users. So add ->sort() member to do it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-13-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
The -F/--fields option is to allow user setup output field in any
order. It can receive any sort keys and following (hpp) fields:
overhead, overhead_sys, overhead_us, sample and period
If guest profiling is enabled, overhead_guest_{sys,us} will be
available too.
The output fields also affect sort order unless you give -s/--sort
option. And any keys specified on -s option, will also be added to
the output field list automatically.
$ perf report -F sym,sample,overhead
...
# Symbol Samples Overhead
# .......................... ............ ........
#
[.] __cxa_atexit 2 2.50%
[.] __libc_csu_init 4 5.00%
[.] __new_exitfn 3 3.75%
[.] _dl_check_map_versions 1 1.25%
[.] _dl_name_match_p 4 5.00%
[.] _dl_setup_hash 1 1.25%
[.] _dl_sysdep_start 1 1.25%
[.] _init 5 6.25%
[.] _setjmp 6 7.50%
[.] a 8 10.00%
[.] b 8 10.00%
[.] brk 1 1.25%
[.] c 8 10.00%
Note that, the example output above is captured after applying next
patch which fixes sort/comparing behavior.
Requested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-12-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
The perf uses different default sort orders for different use-cases,
and this was scattered throughout the code. Add get_default_sort_
order() function to handle this and change initial value of sort_order
to NULL to distinguish it from user-given one.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1400480762-22852-10-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
The commit 09600e0f9e ("perf tools: Compare dso's also when comparing
symbols") added a comparison of dso when comparing symbol.
But if the sort key already has dso, it doesn't need to do it again
since entries have a different dso already filtered out.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rodrigo Campos <rodrigo@sdfg.com.ar>
Link: http://lkml.kernel.org/r/1387344086-12744-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If a hist entry doesn't have symbol information, compare it with its
address. Currently it only compares its level or whether it's NULL.
This can lead to an undesired result like an overhead exceeds 100%
especially when callchain accumulation is enabled by later patch.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rodrigo Campos <rodrigo@sdfg.com.ar>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1387344086-12744-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If given sort keys are all elided there'll be no output except for the
overhead column - actually the TUI shows a noisy output. In this case
it'd be better to show up the sort keys rather than elide.
Before:
$ perf report -s comm -c perf
(...)
# Overhead
# ........
#
100.00%
After:
$ perf report -s comm -c perf
(...)
# Overhead Command
# ........ .......
#
100.00% perf
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383900822-14609-1-git-send-email-namhyung@kernel.org
[ Us curly braces around multi-line statements, as requested by Ingo Molnar ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
At insert time, a hist entry should reference comm at the time otherwise
it'll get the last comm anyway.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/n/tip-n6pykiiymtgmcjs834go2t8x@git.kernel.org
[ Fixed up const pointer issues ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that comm strings are allocated only once and refcounted to be shared
among threads, these can now be safely compared by addresses. This
should remove most hists collapses on post processing.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1381468543-25334-8-git-send-email-namhyung@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
As the thread comm is going to be implemented by way of a more
complicated data structure than just a pointer to a string from the
thread struct, convert the readers of comm to use an accessor instead of
accessing it directly.
The accessor will be later overriden to support an enhanced comm
implementation.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wr683zwy94hmj4ibogmnv9ce@git.kernel.org
[ Rename thread__comm_curr() to thread__comm_str() ]
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
[ Fixed up some minor const pointer issues ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As suggested by tglx, 'self' should be replaced by something that is
more useful.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-fmblhc6tbb99tk1q8vowtsbj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus reported that sometimes 'perf report -s symbol' exits without any
message on TUI. David and Jiri found that it's because it failed to add
a hist entry due to an invalid symbol length.
It turns out that sorting by symbol (address) was broken since it only
compares symbol addresses. The symbol address is a relative address
within a dso thus just checking its address can result in merging
unrelated symbols together. Fix it by checking dso before comparing
symbol address.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1381802517-18812-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the srcline sort key compares ip rather than srcline info. I
guess this was due to a performance reason to run external addr2line
utility. Now we have implemented the functionality inside, use the
srcline info when comparing hist entries.
Also constantly print "??:0" string for unknown srcline rather than
printing ip.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1378876173-13363-10-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This is a preparation of next change. No functional changes are
intended.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1378876173-13363-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
No need to call addr2line since they don't have such information.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1378876173-13363-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently external addr2line tool is used for srcline sort key and
annotate with srcline info. Separate the common code to prepare
upcoming enhancements.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1378876173-13363-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the hist_entry__srcline_snprintf(), path and self->srcline are
pointing the same memory region, but they are doubly allocated.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1378876173-13363-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for recording and displaying the transaction flags.
They are essentially a new sort key. Also display them
in a nice way to the user.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1379688044-14173-6-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Extend the perf branch sorting code to support sorting by in_tx
or abort_tx qualifiers. Also print out those qualifiers.
This also fixes up some of the existing sort key documentation.
We do not support no_tx here, because it's simply not showing
the in_tx flag.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1379688044-14173-4-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is a partial revert of Namhyung's patch
afab87b91f
perf sort: Separate out memory-specific sort keys
He wrote
For global/local weights, I'm not entirely sure to place them into the
memory dimension. But it's the only user at this time.
Well TSX is another (in fact the original) user of the flags, and it
needs them to be common. So move local/global weight back to the common
sort keys.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Link: http://lkml.kernel.org/r/1374188333-17899-1-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For example, in an application with an expensive function implemented
with deeply nested recursive calls, the default call-graph presentation
is dominated by the different callchains within that function. By
ignoring these callees, we can collect the callchains leading into the
function and compactly identify what to blame for expensive calls.
For example, in this report the callers of garbage_collect() are
scattered across the tree:
$ perf report -d ruby 2>- | grep -m10 ^[^#]*[a-z]
22.03% ruby [.] gc_mark
--- gc_mark
|--59.40%-- mark_keyvalue
| st_foreach
| gc_mark_children
| |--99.75%-- rb_gc_mark
| | rb_vm_mark
| | gc_mark_children
| | gc_marks
| | |--99.00%-- garbage_collect
If we ignore the callees of garbage_collect(), its callers are coalesced:
$ perf report --ignore-callees garbage_collect -d ruby 2>- | grep -m10 ^[^#]*[a-z]
72.92% ruby [.] garbage_collect
--- garbage_collect
vm_xmalloc
|--47.08%-- ruby_xmalloc
| st_insert2
| rb_hash_aset
| |--98.45%-- features_index_add
| | rb_provide_feature
| | rb_require_safe
| | vm_call_method
Signed-off-by: Greg Price <price@mit.edu>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20130623031720.GW22203@biohazard-cafe.mit.edu
Link: http://lkml.kernel.org/r/20130708115746.GO22203@biohazard-cafe.mit.edu
Cc: Fengguang Wu <fengguang.wu@intel.com>
[ remove spaces at beginning of line, reported by Fengguang Wu ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kan Liang